summaryrefslogtreecommitdiffstats
path: root/arch/mn10300
diff options
context:
space:
mode:
authorDavid Howells <dhowells@redhat.com>2011-03-18 16:52:54 +0000
committerDavid Howells <dhowells@redhat.com>2011-03-18 16:52:54 +0000
commitddb7d1e975d224885397c002512ded987be3c3bc (patch)
treec24cbe7132c243450aa11939f4d88a2bde8ed6e0 /arch/mn10300
parent02b2944cd70c3166984699dd623612e2f8a3eebf (diff)
downloadop-kernel-dev-ddb7d1e975d224885397c002512ded987be3c3bc.zip
op-kernel-dev-ddb7d1e975d224885397c002512ded987be3c3bc.tar.gz
MN10300: Clear ASB2364 peripheral interrupt masks before enabling interrupts
Clear the interrupt mask registers of ASB2364 peripherals before enabling interrupts so that any peripherals that weren't dealt with by the bootloader after a reboot (if there was one) won't cause an interrupt storm when interrupts are first enabled before the drivers are initialised. Also, attempt to reset the peripherals attached to the FPGA. Signed-off-by: David Howells <dhowells@redhat.com>
Diffstat (limited to 'arch/mn10300')
-rw-r--r--arch/mn10300/unit-asb2364/irq-fpga.c11
-rw-r--r--arch/mn10300/unit-asb2364/unit-init.c44
2 files changed, 55 insertions, 0 deletions
diff --git a/arch/mn10300/unit-asb2364/irq-fpga.c b/arch/mn10300/unit-asb2364/irq-fpga.c
index 4204a6c..ee84e62 100644
--- a/arch/mn10300/unit-asb2364/irq-fpga.c
+++ b/arch/mn10300/unit-asb2364/irq-fpga.c
@@ -88,6 +88,17 @@ void __init irq_fpga_init(void)
{
int irq;
+ ASB2364_FPGA_REG_MASK_LAN = 0x0001;
+ SyncExBus();
+ ASB2364_FPGA_REG_MASK_UART = 0x0001;
+ SyncExBus();
+ ASB2364_FPGA_REG_MASK_I2C = 0x0001;
+ SyncExBus();
+ ASB2364_FPGA_REG_MASK_USB = 0x0001;
+ SyncExBus();
+ ASB2364_FPGA_REG_MASK_FPGA = 0x0001;
+ SyncExBus();
+
for (irq = NR_CPU_IRQS; irq < NR_IRQS; irq++)
set_irq_chip_and_handler(irq, &asb2364_fpga_pic, handle_level_irq);
diff --git a/arch/mn10300/unit-asb2364/unit-init.c b/arch/mn10300/unit-asb2364/unit-init.c
index 1144080..6359b41 100644
--- a/arch/mn10300/unit-asb2364/unit-init.c
+++ b/arch/mn10300/unit-asb2364/unit-init.c
@@ -20,13 +20,41 @@
#include <asm/processor.h>
#include <asm/irq.h>
#include <asm/intctl-regs.h>
+#include <asm/serial-regs.h>
#include <unit/fpga-regs.h>
+#include <unit/serial.h>
+#include <unit/smsc911x.h>
+
+#define TTYS0_SERIAL_IER __SYSREG(SERIAL_PORT0_BASE_ADDRESS + UART_IER * 2, u8)
+#define LAN_IRQ_CFG __SYSREG(SMSC911X_BASE + 0x54, u32)
+#define LAN_INT_EN __SYSREG(SMSC911X_BASE + 0x5c, u32)
/*
* initialise some of the unit hardware before gdbstub is set up
*/
asmlinkage void __init unit_init(void)
{
+ /* Make sure we aren't going to get unexpected interrupts */
+ TTYS0_SERIAL_IER = 0;
+ SC0RXICR = 0;
+ SC0TXICR = 0;
+ SC1RXICR = 0;
+ SC1TXICR = 0;
+ SC2RXICR = 0;
+ SC2TXICR = 0;
+
+ /* Attempt to reset the FPGA attached peripherals */
+ ASB2364_FPGA_REG_RESET_LAN = 0x0000;
+ SyncExBus();
+ ASB2364_FPGA_REG_RESET_UART = 0x0000;
+ SyncExBus();
+ ASB2364_FPGA_REG_RESET_I2C = 0x0000;
+ SyncExBus();
+ ASB2364_FPGA_REG_RESET_USB = 0x0000;
+ SyncExBus();
+ ASB2364_FPGA_REG_RESET_AV = 0x0000;
+ SyncExBus();
+
/* set up the external interrupts */
/* XIRQ[0]: NAND RXBY */
@@ -56,7 +84,23 @@ asmlinkage void __init unit_init(void)
*/
asmlinkage void __init unit_setup(void)
{
+ /* Release the reset on the SMSC911X so that it is ready by the time we
+ * need it */
+ ASB2364_FPGA_REG_RESET_LAN = 0x0001;
+ SyncExBus();
+ ASB2364_FPGA_REG_RESET_UART = 0x0001;
+ SyncExBus();
+ ASB2364_FPGA_REG_RESET_I2C = 0x0001;
+ SyncExBus();
+ ASB2364_FPGA_REG_RESET_USB = 0x0001;
+ SyncExBus();
+ ASB2364_FPGA_REG_RESET_AV = 0x0001;
+ SyncExBus();
+ /* Make sure the ethernet chipset isn't going to give us an interrupt
+ * storm from stuff it was doing pre-reset */
+ LAN_IRQ_CFG = 0;
+ LAN_INT_EN = 0;
}
/*
OpenPOWER on IntegriCloud