summaryrefslogtreecommitdiffstats
path: root/arch/mips
diff options
context:
space:
mode:
authorLinus Torvalds <torvalds@linux-foundation.org>2011-11-03 13:28:14 -0700
committerLinus Torvalds <torvalds@linux-foundation.org>2011-11-03 13:28:14 -0700
commitd6748066ad0e8b2514545998f8367ebb3906f299 (patch)
treef7a9bfd764a8fb781aeda0ef2249afbab42dddf7 /arch/mips
parentf04c045f8ce69c22bda9d99eb927276b776135fc (diff)
parent3ba1e543ab4b02640d396098f2f6a199560d5f2d (diff)
downloadop-kernel-dev-d6748066ad0e8b2514545998f8367ebb3906f299.zip
op-kernel-dev-d6748066ad0e8b2514545998f8367ebb3906f299.tar.gz
Merge branch 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus
* 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus: (37 commits) MIPS: O32: Provide definition of registers ta0 .. ta3. MIPS: perf: Add Octeon support for hardware perf. MIPS: perf: Add support for 64-bit perf counters. MIPS: perf: Reorganize contents of perf support files. MIPS: perf: Cleanup formatting in arch/mips/kernel/perf_event.c MIPS: Add accessor macros for 64-bit performance counter registers. MIPS: Add probes for more Octeon II CPUs. MIPS: Add more CPU identifiers for Octeon II CPUs. MIPS: XLR, XLS: Add comment for smp setup MIPS: JZ4740: GPIO: Check correct IRQ in demux handler MIPS: JZ4740: GPIO: Simplify IRQ demuxer MIPS: JZ4740: Use generic irq chip MIPS: Alchemy: remove all CONFIG_SOC_AU1??? defines MIPS: Alchemy: kill au1xxx.h header MIPS: Alchemy: clean DMA code of CONFIG_SOC_AU1??? defines MIPS, IDE: Alchem, au1xxx-ide: Remove pb1200/db1200 header dep MIPS: Alchemy: Redo PCI as platform driver MIPS: Alchemy: more base address cleanup MIPS: Alchemy: rewrite USB platform setup. MIPS: Alchemy: abstract USB block control register access ... Fix up trivial conflicts in: arch/mips/alchemy/devboards/db1x00/platform.c drivers/ide/Kconfig drivers/mmc/host/au1xmmc.c drivers/video/Kconfig sound/mips/Kconfig
Diffstat (limited to 'arch/mips')
-rw-r--r--arch/mips/Kconfig5
-rw-r--r--arch/mips/Makefile4
-rw-r--r--arch/mips/alchemy/Kconfig50
-rw-r--r--arch/mips/alchemy/common/Makefile6
-rw-r--r--arch/mips/alchemy/common/dbdma.c203
-rw-r--r--arch/mips/alchemy/common/dma.c72
-rw-r--r--arch/mips/alchemy/common/gpiolib.c (renamed from arch/mips/alchemy/common/gpiolib-au1000.c)35
-rw-r--r--arch/mips/alchemy/common/pci.c104
-rw-r--r--arch/mips/alchemy/common/platform.c370
-rw-r--r--arch/mips/alchemy/common/power.c46
-rw-r--r--arch/mips/alchemy/common/setup.c6
-rw-r--r--arch/mips/alchemy/devboards/db1200/platform.c153
-rw-r--r--arch/mips/alchemy/devboards/db1x00/board_setup.c28
-rw-r--r--arch/mips/alchemy/devboards/db1x00/platform.c198
-rw-r--r--arch/mips/alchemy/devboards/pb1100/platform.c49
-rw-r--r--arch/mips/alchemy/devboards/pb1200/platform.c190
-rw-r--r--arch/mips/alchemy/devboards/pb1500/board_setup.c33
-rw-r--r--arch/mips/alchemy/devboards/pb1500/platform.c71
-rw-r--r--arch/mips/alchemy/devboards/pb1550/board_setup.c6
-rw-r--r--arch/mips/alchemy/devboards/pb1550/platform.c119
-rw-r--r--arch/mips/alchemy/gpr/board_setup.c12
-rw-r--r--arch/mips/alchemy/gpr/platform.c47
-rw-r--r--arch/mips/alchemy/mtx-1/board_setup.c40
-rw-r--r--arch/mips/alchemy/mtx-1/platform.c62
-rw-r--r--arch/mips/alchemy/xxs1500/board_setup.c8
-rw-r--r--arch/mips/alchemy/xxs1500/platform.c12
-rw-r--r--arch/mips/include/asm/cacheflush.h24
-rw-r--r--arch/mips/include/asm/cpu.h3
-rw-r--r--arch/mips/include/asm/io.h12
-rw-r--r--arch/mips/include/asm/mach-au1x00/au1000.h559
-rw-r--r--arch/mips/include/asm/mach-au1x00/au1xxx.h43
-rw-r--r--arch/mips/include/asm/mach-au1x00/au1xxx_dbdma.h116
-rw-r--r--arch/mips/include/asm/mach-au1x00/au1xxx_ide.h1
-rw-r--r--arch/mips/include/asm/mach-au1x00/au1xxx_psc.h26
-rw-r--r--arch/mips/include/asm/mach-au1x00/gpio-au1000.h31
-rw-r--r--arch/mips/include/asm/mach-au1x00/gpio.h79
-rw-r--r--arch/mips/include/asm/mach-db1x00/db1200.h2
-rw-r--r--arch/mips/include/asm/mach-db1x00/db1x00.h16
-rw-r--r--arch/mips/include/asm/mach-pb1x00/pb1200.h18
-rw-r--r--arch/mips/include/asm/mach-pb1x00/pb1550.h16
-rw-r--r--arch/mips/include/asm/mipsprom.h6
-rw-r--r--arch/mips/include/asm/mipsregs.h8
-rw-r--r--arch/mips/include/asm/prom.h6
-rw-r--r--arch/mips/include/asm/regdef.h6
-rw-r--r--arch/mips/jz4740/gpio.c140
-rw-r--r--arch/mips/jz4740/irq.c92
-rw-r--r--arch/mips/jz4740/irq.h6
-rw-r--r--arch/mips/jz4740/pm.c3
-rw-r--r--arch/mips/kernel/Makefile5
-rw-r--r--arch/mips/kernel/cpu-probe.c3
-rw-r--r--arch/mips/kernel/perf_event.c519
-rw-r--r--arch/mips/kernel/perf_event_mipsxx.c1241
-rw-r--r--arch/mips/kernel/scall32-o32.S2
-rw-r--r--arch/mips/mm/c-octeon.c6
-rw-r--r--arch/mips/mm/c-r3k.c7
-rw-r--r--arch/mips/mm/c-r4k.c35
-rw-r--r--arch/mips/mm/c-tx39.c7
-rw-r--r--arch/mips/mm/cache.c5
-rw-r--r--arch/mips/mm/tlb-r3k.c4
-rw-r--r--arch/mips/mm/tlb-r4k.c4
-rw-r--r--arch/mips/netlogic/Platform5
-rw-r--r--arch/mips/netlogic/xlr/setup.c4
-rw-r--r--arch/mips/netlogic/xlr/smp.c6
-rw-r--r--arch/mips/netlogic/xlr/smpboot.S16
-rw-r--r--arch/mips/pci/Makefile3
-rw-r--r--arch/mips/pci/fixup-au1000.c43
-rw-r--r--arch/mips/pci/ops-au1000.c308
-rw-r--r--arch/mips/pci/pci-alchemy.c516
-rw-r--r--arch/mips/pmc-sierra/msp71xx/msp_setup.c1
-rw-r--r--arch/mips/pmc-sierra/yosemite/py-console.c12
-rw-r--r--arch/mips/pnx8550/common/prom.c2
-rw-r--r--arch/mips/sgi-ip27/ip27-irq.c4
72 files changed, 3050 insertions, 2850 deletions
diff --git a/arch/mips/Kconfig b/arch/mips/Kconfig
index 4cbc6d8..62b9677 100644
--- a/arch/mips/Kconfig
+++ b/arch/mips/Kconfig
@@ -47,6 +47,8 @@ config MIPS_ALCHEMY
select GENERIC_GPIO
select ARCH_WANT_OPTIONAL_GPIOLIB
select SYS_SUPPORTS_ZBOOT
+ select USB_ARCH_HAS_OHCI
+ select USB_ARCH_HAS_EHCI
config AR7
bool "Texas Instruments AR7"
@@ -206,6 +208,7 @@ config MACH_JZ4740
select SYS_HAS_EARLY_PRINTK
select HAVE_PWM
select HAVE_CLK
+ select GENERIC_IRQ_CHIP
config LANTIQ
bool "Lantiq based platforms"
@@ -2092,7 +2095,7 @@ config NODES_SHIFT
config HW_PERF_EVENTS
bool "Enable hardware performance counter support for perf events"
- depends on PERF_EVENTS && !MIPS_MT_SMTC && OPROFILE=n && CPU_MIPS32
+ depends on PERF_EVENTS && !MIPS_MT_SMTC && OPROFILE=n && (CPU_MIPS32 || CPU_MIPS64 || CPU_R10000 || CPU_SB1 || CPU_CAVIUM_OCTEON)
default y
help
Enable hardware performance counter support for perf events. If
diff --git a/arch/mips/Makefile b/arch/mips/Makefile
index 53e3514..9b4cb00 100644
--- a/arch/mips/Makefile
+++ b/arch/mips/Makefile
@@ -226,7 +226,7 @@ LDFLAGS += -m $(ld-emul)
ifdef CONFIG_MIPS
CHECKFLAGS += $(shell $(CC) $(KBUILD_CFLAGS) -dM -E -xc /dev/null | \
egrep -vw '__GNUC_(|MINOR_|PATCHLEVEL_)_' | \
- sed -e 's/^\#define /-D/' -e "s/ /='/" -e "s/$$/'/")
+ sed -e "s/^\#define /-D'/" -e "s/ /'='/" -e "s/$$/'/")
ifdef CONFIG_64BIT
CHECKFLAGS += -m64
endif
@@ -295,7 +295,9 @@ endif
install:
$(Q)install -D -m 755 vmlinux $(INSTALL_PATH)/vmlinux-$(KERNELRELEASE)
+ifdef CONFIG_SYS_SUPPORTS_ZBOOT
$(Q)install -D -m 755 vmlinuz $(INSTALL_PATH)/vmlinuz-$(KERNELRELEASE)
+endif
$(Q)install -D -m 644 .config $(INSTALL_PATH)/config-$(KERNELRELEASE)
$(Q)install -D -m 644 System.map $(INSTALL_PATH)/System.map-$(KERNELRELEASE)
diff --git a/arch/mips/alchemy/Kconfig b/arch/mips/alchemy/Kconfig
index 2ccfd4a..2a68be6 100644
--- a/arch/mips/alchemy/Kconfig
+++ b/arch/mips/alchemy/Kconfig
@@ -18,20 +18,20 @@ config MIPS_MTX1
bool "4G Systems MTX-1 board"
select DMA_NONCOHERENT
select HW_HAS_PCI
- select SOC_AU1500
+ select ALCHEMY_GPIOINT_AU1000
select SYS_SUPPORTS_LITTLE_ENDIAN
select SYS_HAS_EARLY_PRINTK
config MIPS_BOSPORUS
bool "Alchemy Bosporus board"
- select SOC_AU1500
+ select ALCHEMY_GPIOINT_AU1000
select DMA_NONCOHERENT
select SYS_SUPPORTS_LITTLE_ENDIAN
select SYS_HAS_EARLY_PRINTK
config MIPS_DB1000
bool "Alchemy DB1000 board"
- select SOC_AU1000
+ select ALCHEMY_GPIOINT_AU1000
select DMA_NONCOHERENT
select HW_HAS_PCI
select SYS_SUPPORTS_LITTLE_ENDIAN
@@ -39,14 +39,14 @@ config MIPS_DB1000
config MIPS_DB1100
bool "Alchemy DB1100 board"
- select SOC_AU1100
+ select ALCHEMY_GPIOINT_AU1000
select DMA_NONCOHERENT
select SYS_SUPPORTS_LITTLE_ENDIAN
select SYS_HAS_EARLY_PRINTK
config MIPS_DB1200
bool "Alchemy DB1200 board"
- select SOC_AU1200
+ select ALCHEMY_GPIOINT_AU1000
select DMA_COHERENT
select MIPS_DISABLE_OBSOLETE_IDE
select SYS_SUPPORTS_LITTLE_ENDIAN
@@ -54,7 +54,7 @@ config MIPS_DB1200
config MIPS_DB1500
bool "Alchemy DB1500 board"
- select SOC_AU1500
+ select ALCHEMY_GPIOINT_AU1000
select DMA_NONCOHERENT
select HW_HAS_PCI
select MIPS_DISABLE_OBSOLETE_IDE
@@ -64,7 +64,7 @@ config MIPS_DB1500
config MIPS_DB1550
bool "Alchemy DB1550 board"
- select SOC_AU1550
+ select ALCHEMY_GPIOINT_AU1000
select HW_HAS_PCI
select DMA_NONCOHERENT
select MIPS_DISABLE_OBSOLETE_IDE
@@ -74,13 +74,13 @@ config MIPS_DB1550
config MIPS_MIRAGE
bool "Alchemy Mirage board"
select DMA_NONCOHERENT
- select SOC_AU1500
+ select ALCHEMY_GPIOINT_AU1000
select SYS_SUPPORTS_LITTLE_ENDIAN
select SYS_HAS_EARLY_PRINTK
config MIPS_PB1000
bool "Alchemy PB1000 board"
- select SOC_AU1000
+ select ALCHEMY_GPIOINT_AU1000
select DMA_NONCOHERENT
select HW_HAS_PCI
select SWAP_IO_SPACE
@@ -89,7 +89,7 @@ config MIPS_PB1000
config MIPS_PB1100
bool "Alchemy PB1100 board"
- select SOC_AU1100
+ select ALCHEMY_GPIOINT_AU1000
select DMA_NONCOHERENT
select HW_HAS_PCI
select SWAP_IO_SPACE
@@ -98,7 +98,7 @@ config MIPS_PB1100
config MIPS_PB1200
bool "Alchemy PB1200 board"
- select SOC_AU1200
+ select ALCHEMY_GPIOINT_AU1000
select DMA_NONCOHERENT
select MIPS_DISABLE_OBSOLETE_IDE
select SYS_SUPPORTS_LITTLE_ENDIAN
@@ -106,7 +106,7 @@ config MIPS_PB1200
config MIPS_PB1500
bool "Alchemy PB1500 board"
- select SOC_AU1500
+ select ALCHEMY_GPIOINT_AU1000
select DMA_NONCOHERENT
select HW_HAS_PCI
select SYS_SUPPORTS_LITTLE_ENDIAN
@@ -114,7 +114,7 @@ config MIPS_PB1500
config MIPS_PB1550
bool "Alchemy PB1550 board"
- select SOC_AU1550
+ select ALCHEMY_GPIOINT_AU1000
select DMA_NONCOHERENT
select HW_HAS_PCI
select MIPS_DISABLE_OBSOLETE_IDE
@@ -124,13 +124,13 @@ config MIPS_PB1550
config MIPS_XXS1500
bool "MyCable XXS1500 board"
select DMA_NONCOHERENT
- select SOC_AU1500
+ select ALCHEMY_GPIOINT_AU1000
select SYS_SUPPORTS_LITTLE_ENDIAN
select SYS_HAS_EARLY_PRINTK
config MIPS_GPR
bool "Trapeze ITS GPR board"
- select SOC_AU1550
+ select ALCHEMY_GPIOINT_AU1000
select HW_HAS_PCI
select DMA_NONCOHERENT
select MIPS_DISABLE_OBSOLETE_IDE
@@ -138,23 +138,3 @@ config MIPS_GPR
select SYS_HAS_EARLY_PRINTK
endchoice
-
-config SOC_AU1000
- bool
- select ALCHEMY_GPIOINT_AU1000
-
-config SOC_AU1100
- bool
- select ALCHEMY_GPIOINT_AU1000
-
-config SOC_AU1500
- bool
- select ALCHEMY_GPIOINT_AU1000
-
-config SOC_AU1550
- bool
- select ALCHEMY_GPIOINT_AU1000
-
-config SOC_AU1200
- bool
- select ALCHEMY_GPIOINT_AU1000
diff --git a/arch/mips/alchemy/common/Makefile b/arch/mips/alchemy/common/Makefile
index 27811fe..811ece7 100644
--- a/arch/mips/alchemy/common/Makefile
+++ b/arch/mips/alchemy/common/Makefile
@@ -12,9 +12,5 @@ obj-$(CONFIG_ALCHEMY_GPIOINT_AU1000) += irq.o
# optional gpiolib support
ifeq ($(CONFIG_ALCHEMY_GPIO_INDIRECT),)
- ifeq ($(CONFIG_GPIOLIB),y)
- obj-$(CONFIG_ALCHEMY_GPIOINT_AU1000) += gpiolib-au1000.o
- endif
+ obj-$(CONFIG_GPIOLIB) += gpiolib.o
endif
-
-obj-$(CONFIG_PCI) += pci.o
diff --git a/arch/mips/alchemy/common/dbdma.c b/arch/mips/alchemy/common/dbdma.c
index 3a5abb5..0e63ee4 100644
--- a/arch/mips/alchemy/common/dbdma.c
+++ b/arch/mips/alchemy/common/dbdma.c
@@ -40,8 +40,6 @@
#include <asm/mach-au1x00/au1000.h>
#include <asm/mach-au1x00/au1xxx_dbdma.h>
-#if defined(CONFIG_SOC_AU1550) || defined(CONFIG_SOC_AU1200)
-
/*
* The Descriptor Based DMA supports up to 16 channels.
*
@@ -62,120 +60,96 @@ static dbdma_global_t *dbdma_gptr =
(dbdma_global_t *)KSEG1ADDR(AU1550_DBDMA_CONF_PHYS_ADDR);
static int dbdma_initialized;
-static dbdev_tab_t dbdev_tab[] = {
-#ifdef CONFIG_SOC_AU1550
+static dbdev_tab_t *dbdev_tab;
+
+static dbdev_tab_t au1550_dbdev_tab[] __initdata = {
/* UARTS */
- { DSCR_CMD0_UART0_TX, DEV_FLAGS_OUT, 0, 8, 0x11100004, 0, 0 },
- { DSCR_CMD0_UART0_RX, DEV_FLAGS_IN, 0, 8, 0x11100000, 0, 0 },
- { DSCR_CMD0_UART3_TX, DEV_FLAGS_OUT, 0, 8, 0x11400004, 0, 0 },
- { DSCR_CMD0_UART3_RX, DEV_FLAGS_IN, 0, 8, 0x11400000, 0, 0 },
+ { AU1550_DSCR_CMD0_UART0_TX, DEV_FLAGS_OUT, 0, 8, 0x11100004, 0, 0 },
+ { AU1550_DSCR_CMD0_UART0_RX, DEV_FLAGS_IN, 0, 8, 0x11100000, 0, 0 },
+ { AU1550_DSCR_CMD0_UART3_TX, DEV_FLAGS_OUT, 0, 8, 0x11400004, 0, 0 },
+ { AU1550_DSCR_CMD0_UART3_RX, DEV_FLAGS_IN, 0, 8, 0x11400000, 0, 0 },
/* EXT DMA */
- { DSCR_CMD0_DMA_REQ0, 0, 0, 0, 0x00000000, 0, 0 },
- { DSCR_CMD0_DMA_REQ1, 0, 0, 0, 0x00000000, 0, 0 },
- { DSCR_CMD0_DMA_REQ2, 0, 0, 0, 0x00000000, 0, 0 },
- { DSCR_CMD0_DMA_REQ3, 0, 0, 0, 0x00000000, 0, 0 },
+ { AU1550_DSCR_CMD0_DMA_REQ0, 0, 0, 0, 0x00000000, 0, 0 },
+ { AU1550_DSCR_CMD0_DMA_REQ1, 0, 0, 0, 0x00000000, 0, 0 },
+ { AU1550_DSCR_CMD0_DMA_REQ2, 0, 0, 0, 0x00000000, 0, 0 },
+ { AU1550_DSCR_CMD0_DMA_REQ3, 0, 0, 0, 0x00000000, 0, 0 },
/* USB DEV */
- { DSCR_CMD0_USBDEV_RX0, DEV_FLAGS_IN, 4, 8, 0x10200000, 0, 0 },
- { DSCR_CMD0_USBDEV_TX0, DEV_FLAGS_OUT, 4, 8, 0x10200004, 0, 0 },
- { DSCR_CMD0_USBDEV_TX1, DEV_FLAGS_OUT, 4, 8, 0x10200008, 0, 0 },
- { DSCR_CMD0_USBDEV_TX2, DEV_FLAGS_OUT, 4, 8, 0x1020000c, 0, 0 },
- { DSCR_CMD0_USBDEV_RX3, DEV_FLAGS_IN, 4, 8, 0x10200010, 0, 0 },
- { DSCR_CMD0_USBDEV_RX4, DEV_FLAGS_IN, 4, 8, 0x10200014, 0, 0 },
-
- /* PSC 0 */
- { DSCR_CMD0_PSC0_TX, DEV_FLAGS_OUT, 0, 0, 0x11a0001c, 0, 0 },
- { DSCR_CMD0_PSC0_RX, DEV_FLAGS_IN, 0, 0, 0x11a0001c, 0, 0 },
-
- /* PSC 1 */
- { DSCR_CMD0_PSC1_TX, DEV_FLAGS_OUT, 0, 0, 0x11b0001c, 0, 0 },
- { DSCR_CMD0_PSC1_RX, DEV_FLAGS_IN, 0, 0, 0x11b0001c, 0, 0 },
-
- /* PSC 2 */
- { DSCR_CMD0_PSC2_TX, DEV_FLAGS_OUT, 0, 0, 0x10a0001c, 0, 0 },
- { DSCR_CMD0_PSC2_RX, DEV_FLAGS_IN, 0, 0, 0x10a0001c, 0, 0 },
-
- /* PSC 3 */
- { DSCR_CMD0_PSC3_TX, DEV_FLAGS_OUT, 0, 0, 0x10b0001c, 0, 0 },
- { DSCR_CMD0_PSC3_RX, DEV_FLAGS_IN, 0, 0, 0x10b0001c, 0, 0 },
-
- { DSCR_CMD0_PCI_WRITE, 0, 0, 0, 0x00000000, 0, 0 }, /* PCI */
- { DSCR_CMD0_NAND_FLASH, 0, 0, 0, 0x00000000, 0, 0 }, /* NAND */
+ { AU1550_DSCR_CMD0_USBDEV_RX0, DEV_FLAGS_IN, 4, 8, 0x10200000, 0, 0 },
+ { AU1550_DSCR_CMD0_USBDEV_TX0, DEV_FLAGS_OUT, 4, 8, 0x10200004, 0, 0 },
+ { AU1550_DSCR_CMD0_USBDEV_TX1, DEV_FLAGS_OUT, 4, 8, 0x10200008, 0, 0 },
+ { AU1550_DSCR_CMD0_USBDEV_TX2, DEV_FLAGS_OUT, 4, 8, 0x1020000c, 0, 0 },
+ { AU1550_DSCR_CMD0_USBDEV_RX3, DEV_FLAGS_IN, 4, 8, 0x10200010, 0, 0 },
+ { AU1550_DSCR_CMD0_USBDEV_RX4, DEV_FLAGS_IN, 4, 8, 0x10200014, 0, 0 },
+
+ /* PSCs */
+ { AU1550_DSCR_CMD0_PSC0_TX, DEV_FLAGS_OUT, 0, 0, 0x11a0001c, 0, 0 },
+ { AU1550_DSCR_CMD0_PSC0_RX, DEV_FLAGS_IN, 0, 0, 0x11a0001c, 0, 0 },
+ { AU1550_DSCR_CMD0_PSC1_TX, DEV_FLAGS_OUT, 0, 0, 0x11b0001c, 0, 0 },
+ { AU1550_DSCR_CMD0_PSC1_RX, DEV_FLAGS_IN, 0, 0, 0x11b0001c, 0, 0 },
+ { AU1550_DSCR_CMD0_PSC2_TX, DEV_FLAGS_OUT, 0, 0, 0x10a0001c, 0, 0 },
+ { AU1550_DSCR_CMD0_PSC2_RX, DEV_FLAGS_IN, 0, 0, 0x10a0001c, 0, 0 },
+ { AU1550_DSCR_CMD0_PSC3_TX, DEV_FLAGS_OUT, 0, 0, 0x10b0001c, 0, 0 },
+ { AU1550_DSCR_CMD0_PSC3_RX, DEV_FLAGS_IN, 0, 0, 0x10b0001c, 0, 0 },
+
+ { AU1550_DSCR_CMD0_PCI_WRITE, 0, 0, 0, 0x00000000, 0, 0 }, /* PCI */
+ { AU1550_DSCR_CMD0_NAND_FLASH, 0, 0, 0, 0x00000000, 0, 0 }, /* NAND */
/* MAC 0 */
- { DSCR_CMD0_MAC0_RX, DEV_FLAGS_IN, 0, 0, 0x00000000, 0, 0 },
- { DSCR_CMD0_MAC0_TX, DEV_FLAGS_OUT, 0, 0, 0x00000000, 0, 0 },
+ { AU1550_DSCR_CMD0_MAC0_RX, DEV_FLAGS_IN, 0, 0, 0x00000000, 0, 0 },
+ { AU1550_DSCR_CMD0_MAC0_TX, DEV_FLAGS_OUT, 0, 0, 0x00000000, 0, 0 },
/* MAC 1 */
- { DSCR_CMD0_MAC1_RX, DEV_FLAGS_IN, 0, 0, 0x00000000, 0, 0 },
- { DSCR_CMD0_MAC1_TX, DEV_FLAGS_OUT, 0, 0, 0x00000000, 0, 0 },
-
-#endif /* CONFIG_SOC_AU1550 */
+ { AU1550_DSCR_CMD0_MAC1_RX, DEV_FLAGS_IN, 0, 0, 0x00000000, 0, 0 },
+ { AU1550_DSCR_CMD0_MAC1_TX, DEV_FLAGS_OUT, 0, 0, 0x00000000, 0, 0 },
-#ifdef CONFIG_SOC_AU1200
- { DSCR_CMD0_UART0_TX, DEV_FLAGS_OUT, 0, 8, 0x11100004, 0, 0 },
- { DSCR_CMD0_UART0_RX, DEV_FLAGS_IN, 0, 8, 0x11100000, 0, 0 },
- { DSCR_CMD0_UART1_TX, DEV_FLAGS_OUT, 0, 8, 0x11200004, 0, 0 },
- { DSCR_CMD0_UART1_RX, DEV_FLAGS_IN, 0, 8, 0x11200000, 0, 0 },
-
- { DSCR_CMD0_DMA_REQ0, 0, 0, 0, 0x00000000, 0, 0 },
- { DSCR_CMD0_DMA_REQ1, 0, 0, 0, 0x00000000, 0, 0 },
+ { DSCR_CMD0_THROTTLE, DEV_FLAGS_ANYUSE, 0, 0, 0x00000000, 0, 0 },
+ { DSCR_CMD0_ALWAYS, DEV_FLAGS_ANYUSE, 0, 0, 0x00000000, 0, 0 },
+};
- { DSCR_CMD0_MAE_BE, DEV_FLAGS_ANYUSE, 0, 0, 0x00000000, 0, 0 },
- { DSCR_CMD0_MAE_FE, DEV_FLAGS_ANYUSE, 0, 0, 0x00000000, 0, 0 },
- { DSCR_CMD0_MAE_BOTH, DEV_FLAGS_ANYUSE, 0, 0, 0x00000000, 0, 0 },
- { DSCR_CMD0_LCD, DEV_FLAGS_ANYUSE, 0, 0, 0x00000000, 0, 0 },
+static dbdev_tab_t au1200_dbdev_tab[] __initdata = {
+ { AU1200_DSCR_CMD0_UART0_TX, DEV_FLAGS_OUT, 0, 8, 0x11100004, 0, 0 },
+ { AU1200_DSCR_CMD0_UART0_RX, DEV_FLAGS_IN, 0, 8, 0x11100000, 0, 0 },
+ { AU1200_DSCR_CMD0_UART1_TX, DEV_FLAGS_OUT, 0, 8, 0x11200004, 0, 0 },
+ { AU1200_DSCR_CMD0_UART1_RX, DEV_FLAGS_IN, 0, 8, 0x11200000, 0, 0 },
- { DSCR_CMD0_SDMS_TX0, DEV_FLAGS_OUT, 4, 8, 0x10600000, 0, 0 },
- { DSCR_CMD0_SDMS_RX0, DEV_FLAGS_IN, 4, 8, 0x10600004, 0, 0 },
- { DSCR_CMD0_SDMS_TX1, DEV_FLAGS_OUT, 4, 8, 0x10680000, 0, 0 },
- { DSCR_CMD0_SDMS_RX1, DEV_FLAGS_IN, 4, 8, 0x10680004, 0, 0 },
+ { AU1200_DSCR_CMD0_DMA_REQ0, 0, 0, 0, 0x00000000, 0, 0 },
+ { AU1200_DSCR_CMD0_DMA_REQ1, 0, 0, 0, 0x00000000, 0, 0 },
- { DSCR_CMD0_AES_RX, DEV_FLAGS_IN , 4, 32, 0x10300008, 0, 0 },
- { DSCR_CMD0_AES_TX, DEV_FLAGS_OUT, 4, 32, 0x10300004, 0, 0 },
+ { AU1200_DSCR_CMD0_MAE_BE, DEV_FLAGS_ANYUSE, 0, 0, 0x00000000, 0, 0 },
+ { AU1200_DSCR_CMD0_MAE_FE, DEV_FLAGS_ANYUSE, 0, 0, 0x00000000, 0, 0 },
+ { AU1200_DSCR_CMD0_MAE_BOTH, DEV_FLAGS_ANYUSE, 0, 0, 0x00000000, 0, 0 },
+ { AU1200_DSCR_CMD0_LCD, DEV_FLAGS_ANYUSE, 0, 0, 0x00000000, 0, 0 },
- { DSCR_CMD0_PSC0_TX, DEV_FLAGS_OUT, 0, 16, 0x11a0001c, 0, 0 },
- { DSCR_CMD0_PSC0_RX, DEV_FLAGS_IN, 0, 16, 0x11a0001c, 0, 0 },
- { DSCR_CMD0_PSC0_SYNC, DEV_FLAGS_ANYUSE, 0, 0, 0x00000000, 0, 0 },
+ { AU1200_DSCR_CMD0_SDMS_TX0, DEV_FLAGS_OUT, 4, 8, 0x10600000, 0, 0 },
+ { AU1200_DSCR_CMD0_SDMS_RX0, DEV_FLAGS_IN, 4, 8, 0x10600004, 0, 0 },
+ { AU1200_DSCR_CMD0_SDMS_TX1, DEV_FLAGS_OUT, 4, 8, 0x10680000, 0, 0 },
+ { AU1200_DSCR_CMD0_SDMS_RX1, DEV_FLAGS_IN, 4, 8, 0x10680004, 0, 0 },
- { DSCR_CMD0_PSC1_TX, DEV_FLAGS_OUT, 0, 16, 0x11b0001c, 0, 0 },
- { DSCR_CMD0_PSC1_RX, DEV_FLAGS_IN, 0, 16, 0x11b0001c, 0, 0 },
- { DSCR_CMD0_PSC1_SYNC, DEV_FLAGS_ANYUSE, 0, 0, 0x00000000, 0, 0 },
+ { AU1200_DSCR_CMD0_AES_RX, DEV_FLAGS_IN , 4, 32, 0x10300008, 0, 0 },
+ { AU1200_DSCR_CMD0_AES_TX, DEV_FLAGS_OUT, 4, 32, 0x10300004, 0, 0 },
- { DSCR_CMD0_CIM_RXA, DEV_FLAGS_IN, 0, 32, 0x14004020, 0, 0 },
- { DSCR_CMD0_CIM_RXB, DEV_FLAGS_IN, 0, 32, 0x14004040, 0, 0 },
- { DSCR_CMD0_CIM_RXC, DEV_FLAGS_IN, 0, 32, 0x14004060, 0, 0 },
- { DSCR_CMD0_CIM_SYNC, DEV_FLAGS_ANYUSE, 0, 0, 0x00000000, 0, 0 },
+ { AU1200_DSCR_CMD0_PSC0_TX, DEV_FLAGS_OUT, 0, 16, 0x11a0001c, 0, 0 },
+ { AU1200_DSCR_CMD0_PSC0_RX, DEV_FLAGS_IN, 0, 16, 0x11a0001c, 0, 0 },
+ { AU1200_DSCR_CMD0_PSC0_SYNC, DEV_FLAGS_ANYUSE, 0, 0, 0x00000000, 0, 0 },
+ { AU1200_DSCR_CMD0_PSC1_TX, DEV_FLAGS_OUT, 0, 16, 0x11b0001c, 0, 0 },
+ { AU1200_DSCR_CMD0_PSC1_RX, DEV_FLAGS_IN, 0, 16, 0x11b0001c, 0, 0 },
+ { AU1200_DSCR_CMD0_PSC1_SYNC, DEV_FLAGS_ANYUSE, 0, 0, 0x00000000, 0, 0 },
- { DSCR_CMD0_NAND_FLASH, DEV_FLAGS_IN, 0, 0, 0x00000000, 0, 0 },
+ { AU1200_DSCR_CMD0_CIM_RXA, DEV_FLAGS_IN, 0, 32, 0x14004020, 0, 0 },
+ { AU1200_DSCR_CMD0_CIM_RXB, DEV_FLAGS_IN, 0, 32, 0x14004040, 0, 0 },
+ { AU1200_DSCR_CMD0_CIM_RXC, DEV_FLAGS_IN, 0, 32, 0x14004060, 0, 0 },
+ { AU1200_DSCR_CMD0_CIM_SYNC, DEV_FLAGS_ANYUSE, 0, 0, 0x00000000, 0, 0 },
-#endif /* CONFIG_SOC_AU1200 */
+ { AU1200_DSCR_CMD0_NAND_FLASH, DEV_FLAGS_IN, 0, 0, 0x00000000, 0, 0 },
{ DSCR_CMD0_THROTTLE, DEV_FLAGS_ANYUSE, 0, 0, 0x00000000, 0, 0 },
- { DSCR_CMD0_ALWAYS, DEV_FLAGS_ANYUSE, 0, 0, 0x00000000, 0, 0 },
-
- /* Provide 16 user definable device types */
- { ~0, 0, 0, 0, 0, 0, 0 },
- { ~0, 0, 0, 0, 0, 0, 0 },
- { ~0, 0, 0, 0, 0, 0, 0 },
- { ~0, 0, 0, 0, 0, 0, 0 },
- { ~0, 0, 0, 0, 0, 0, 0 },
- { ~0, 0, 0, 0, 0, 0, 0 },
- { ~0, 0, 0, 0, 0, 0, 0 },
- { ~0, 0, 0, 0, 0, 0, 0 },
- { ~0, 0, 0, 0, 0, 0, 0 },
- { ~0, 0, 0, 0, 0, 0, 0 },
- { ~0, 0, 0, 0, 0, 0, 0 },
- { ~0, 0, 0, 0, 0, 0, 0 },
- { ~0, 0, 0, 0, 0, 0, 0 },
- { ~0, 0, 0, 0, 0, 0, 0 },
- { ~0, 0, 0, 0, 0, 0, 0 },
- { ~0, 0, 0, 0, 0, 0, 0 },
+ { DSCR_CMD0_ALWAYS, DEV_FLAGS_ANYUSE, 0, 0, 0x00000000, 0, 0 },
};
-#define DBDEV_TAB_SIZE ARRAY_SIZE(dbdev_tab)
-
+/* 32 predefined plus 32 custom */
+#define DBDEV_TAB_SIZE 64
static chan_tab_t *chan_tab_ptr[NUM_DBDMA_CHANS];
@@ -1028,38 +1002,43 @@ static struct syscore_ops alchemy_dbdma_syscore_ops = {
.resume = alchemy_dbdma_resume,
};
-static int __init au1xxx_dbdma_init(void)
+static int __init dbdma_setup(unsigned int irq, dbdev_tab_t *idtable)
{
- int irq_nr, ret;
+ int ret;
+
+ dbdev_tab = kzalloc(sizeof(dbdev_tab_t) * DBDEV_TAB_SIZE, GFP_KERNEL);
+ if (!dbdev_tab)
+ return -ENOMEM;
+
+ memcpy(dbdev_tab, idtable, 32 * sizeof(dbdev_tab_t));
+ for (ret = 32; ret < DBDEV_TAB_SIZE; ret++)
+ dbdev_tab[ret].dev_id = ~0;
dbdma_gptr->ddma_config = 0;
dbdma_gptr->ddma_throttle = 0;
dbdma_gptr->ddma_inten = 0xffff;
au_sync();
- switch (alchemy_get_cputype()) {
- case ALCHEMY_CPU_AU1550:
- irq_nr = AU1550_DDMA_INT;
- break;
- case ALCHEMY_CPU_AU1200:
- irq_nr = AU1200_DDMA_INT;
- break;
- default:
- return -ENODEV;
- }
-
- ret = request_irq(irq_nr, dbdma_interrupt, IRQF_DISABLED,
- "Au1xxx dbdma", (void *)dbdma_gptr);
+ ret = request_irq(irq, dbdma_interrupt, IRQF_DISABLED, "dbdma",
+ (void *)dbdma_gptr);
if (ret)
printk(KERN_ERR "Cannot grab DBDMA interrupt!\n");
else {
dbdma_initialized = 1;
- printk(KERN_INFO "Alchemy DBDMA initialized\n");
register_syscore_ops(&alchemy_dbdma_syscore_ops);
}
return ret;
}
-subsys_initcall(au1xxx_dbdma_init);
-#endif /* defined(CONFIG_SOC_AU1550) || defined(CONFIG_SOC_AU1200) */
+static int __init alchemy_dbdma_init(void)
+{
+ switch (alchemy_get_cputype()) {
+ case ALCHEMY_CPU_AU1550:
+ return dbdma_setup(AU1550_DDMA_INT, au1550_dbdev_tab);
+ case ALCHEMY_CPU_AU1200:
+ return dbdma_setup(AU1200_DDMA_INT, au1200_dbdev_tab);
+ }
+ return 0;
+}
+subsys_initcall(alchemy_dbdma_init);
diff --git a/arch/mips/alchemy/common/dma.c b/arch/mips/alchemy/common/dma.c
index 347980e..9b624e2 100644
--- a/arch/mips/alchemy/common/dma.c
+++ b/arch/mips/alchemy/common/dma.c
@@ -40,8 +40,6 @@
#include <asm/mach-au1x00/au1000.h>
#include <asm/mach-au1x00/au1000_dma.h>
-#if defined(CONFIG_SOC_AU1000) || defined(CONFIG_SOC_AU1500) || \
- defined(CONFIG_SOC_AU1100)
/*
* A note on resource allocation:
*
@@ -88,12 +86,12 @@ static const struct dma_dev {
{ AU1000_AC97_PHYS_ADDR + 0x08, DMA_DW16 | DMA_DR }, /* AC97 RX c */
{ AU1000_UART3_PHYS_ADDR + 0x04, DMA_DW8 | DMA_NC }, /* UART3_TX */
{ AU1000_UART3_PHYS_ADDR + 0x00, DMA_DW8 | DMA_NC | DMA_DR }, /* UART3_RX */
- { AU1000_USBD_PHYS_ADDR + 0x00, DMA_DW8 | DMA_NC | DMA_DR }, /* EP0RD */
- { AU1000_USBD_PHYS_ADDR + 0x04, DMA_DW8 | DMA_NC }, /* EP0WR */
- { AU1000_USBD_PHYS_ADDR + 0x08, DMA_DW8 | DMA_NC }, /* EP2WR */
- { AU1000_USBD_PHYS_ADDR + 0x0c, DMA_DW8 | DMA_NC }, /* EP3WR */
- { AU1000_USBD_PHYS_ADDR + 0x10, DMA_DW8 | DMA_NC | DMA_DR }, /* EP4RD */
- { AU1000_USBD_PHYS_ADDR + 0x14, DMA_DW8 | DMA_NC | DMA_DR }, /* EP5RD */
+ { AU1000_USB_UDC_PHYS_ADDR + 0x00, DMA_DW8 | DMA_NC | DMA_DR }, /* EP0RD */
+ { AU1000_USB_UDC_PHYS_ADDR + 0x04, DMA_DW8 | DMA_NC }, /* EP0WR */
+ { AU1000_USB_UDC_PHYS_ADDR + 0x08, DMA_DW8 | DMA_NC }, /* EP2WR */
+ { AU1000_USB_UDC_PHYS_ADDR + 0x0c, DMA_DW8 | DMA_NC }, /* EP3WR */
+ { AU1000_USB_UDC_PHYS_ADDR + 0x10, DMA_DW8 | DMA_NC | DMA_DR }, /* EP4RD */
+ { AU1000_USB_UDC_PHYS_ADDR + 0x14, DMA_DW8 | DMA_NC | DMA_DR }, /* EP5RD */
/* on Au1500, these 2 are DMA_REQ2/3 (GPIO208/209) instead! */
{ AU1000_I2S_PHYS_ADDR + 0x00, DMA_DW32 | DMA_NC}, /* I2S TX */
{ AU1000_I2S_PHYS_ADDR + 0x00, DMA_DW32 | DMA_NC | DMA_DR}, /* I2S RX */
@@ -170,13 +168,13 @@ int request_au1000_dma(int dev_id, const char *dev_str,
const struct dma_dev *dev;
int i, ret;
-#if defined(CONFIG_SOC_AU1100)
- if (dev_id < 0 || dev_id >= (DMA_NUM_DEV + DMA_NUM_DEV_BANK2))
- return -EINVAL;
-#else
- if (dev_id < 0 || dev_id >= DMA_NUM_DEV)
- return -EINVAL;
-#endif
+ if (alchemy_get_cputype() == ALCHEMY_CPU_AU1100) {
+ if (dev_id < 0 || dev_id >= (DMA_NUM_DEV + DMA_NUM_DEV_BANK2))
+ return -EINVAL;
+ } else {
+ if (dev_id < 0 || dev_id >= DMA_NUM_DEV)
+ return -EINVAL;
+ }
for (i = 0; i < NUM_AU1000_DMA_CHANNELS; i++)
if (au1000_dma_table[i].dev_id < 0)
@@ -239,30 +237,28 @@ EXPORT_SYMBOL(free_au1000_dma);
static int __init au1000_dma_init(void)
{
- int base, i;
-
- switch (alchemy_get_cputype()) {
- case ALCHEMY_CPU_AU1000:
- base = AU1000_DMA_INT_BASE;
- break;
- case ALCHEMY_CPU_AU1500:
- base = AU1500_DMA_INT_BASE;
- break;
- case ALCHEMY_CPU_AU1100:
- base = AU1100_DMA_INT_BASE;
- break;
- default:
- goto out;
- }
-
- for (i = 0; i < NUM_AU1000_DMA_CHANNELS; i++)
- au1000_dma_table[i].irq = base + i;
-
- printk(KERN_INFO "Alchemy DMA initialized\n");
+ int base, i;
+
+ switch (alchemy_get_cputype()) {
+ case ALCHEMY_CPU_AU1000:
+ base = AU1000_DMA_INT_BASE;
+ break;
+ case ALCHEMY_CPU_AU1500:
+ base = AU1500_DMA_INT_BASE;
+ break;
+ case ALCHEMY_CPU_AU1100:
+ base = AU1100_DMA_INT_BASE;
+ break;
+ default:
+ goto out;
+ }
+
+ for (i = 0; i < NUM_AU1000_DMA_CHANNELS; i++)
+ au1000_dma_table[i].irq = base + i;
+
+ printk(KERN_INFO "Alchemy DMA initialized\n");
out:
- return 0;
+ return 0;
}
arch_initcall(au1000_dma_init);
-
-#endif /* AU1000 AU1500 AU1100 */
diff --git a/arch/mips/alchemy/common/gpiolib-au1000.c b/arch/mips/alchemy/common/gpiolib.c
index c8e1a94..91fb4d9 100644
--- a/arch/mips/alchemy/common/gpiolib-au1000.c
+++ b/arch/mips/alchemy/common/gpiolib.c
@@ -1,6 +1,6 @@
/*
* Copyright (C) 2007-2009, OpenWrt.org, Florian Fainelli <florian@openwrt.org>
- * GPIOLIB support for Au1000, Au1500, Au1100, Au1550 and Au12x0.
+ * GPIOLIB support for Alchemy chips.
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the
@@ -23,18 +23,18 @@
* 675 Mass Ave, Cambridge, MA 02139, USA.
*
* Notes :
- * au1000 SoC have only one GPIO block : GPIO1
- * Au1100, Au15x0, Au12x0 have a second one : GPIO2
+ * This file must ONLY be built when CONFIG_GPIOLIB=y and
+ * CONFIG_ALCHEMY_GPIO_INDIRECT=n, otherwise compilation will fail!
+ * au1000 SoC have only one GPIO block : GPIO1
+ * Au1100, Au15x0, Au12x0 have a second one : GPIO2
*/
+#include <linux/init.h>
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/types.h>
-#include <linux/platform_device.h>
#include <linux/gpio.h>
-
-#include <asm/mach-au1x00/au1000.h>
-#include <asm/mach-au1x00/gpio.h>
+#include <asm/mach-au1x00/gpio-au1000.h>
static int gpio2_get(struct gpio_chip *chip, unsigned offset)
{
@@ -115,12 +115,19 @@ struct gpio_chip alchemy_gpio_chip[] = {
},
};
-static int __init alchemy_gpiolib_init(void)
+static int __init alchemy_gpiochip_init(void)
{
- gpiochip_add(&alchemy_gpio_chip[0]);
- if (alchemy_get_cputype() != ALCHEMY_CPU_AU1000)
- gpiochip_add(&alchemy_gpio_chip[1]);
-
- return 0;
+ int ret = 0;
+
+ switch (alchemy_get_cputype()) {
+ case ALCHEMY_CPU_AU1000:
+ ret = gpiochip_add(&alchemy_gpio_chip[0]);
+ break;
+ case ALCHEMY_CPU_AU1500...ALCHEMY_CPU_AU1200:
+ ret = gpiochip_add(&alchemy_gpio_chip[0]);
+ ret |= gpiochip_add(&alchemy_gpio_chip[1]);
+ break;
+ }
+ return ret;
}
-arch_initcall(alchemy_gpiolib_init);
+arch_initcall(alchemy_gpiochip_init);
diff --git a/arch/mips/alchemy/common/pci.c b/arch/mips/alchemy/common/pci.c
deleted file mode 100644
index 7866cf5..0000000
--- a/arch/mips/alchemy/common/pci.c
+++ /dev/null
@@ -1,104 +0,0 @@
-/*
- * BRIEF MODULE DESCRIPTION
- * Alchemy/AMD Au1x00 PCI support.
- *
- * Copyright 2001-2003, 2007-2008 MontaVista Software Inc.
- * Author: MontaVista Software, Inc. <source@mvista.com>
- *
- * Copyright (C) 2004 by Ralf Baechle (ralf@linux-mips.org)
- *
- * Support for all devices (greater than 16) added by David Gathright.
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2 of the License, or (at your
- * option) any later version.
- *
- * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
- * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
- * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
- * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
- * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
- * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
- * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
- * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
- * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
- * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *
- * You should have received a copy of the GNU General Public License along
- * with this program; if not, write to the Free Software Foundation, Inc.,
- * 675 Mass Ave, Cambridge, MA 02139, USA.
- */
-
-#include <linux/pci.h>
-#include <linux/kernel.h>
-#include <linux/init.h>
-
-#include <asm/mach-au1x00/au1000.h>
-
-/* TBD */
-static struct resource pci_io_resource = {
- .start = PCI_IO_START,
- .end = PCI_IO_END,
- .name = "PCI IO space",
- .flags = IORESOURCE_IO
-};
-
-static struct resource pci_mem_resource = {
- .start = PCI_MEM_START,
- .end = PCI_MEM_END,
- .name = "PCI memory space",
- .flags = IORESOURCE_MEM
-};
-
-extern struct pci_ops au1x_pci_ops;
-
-static struct pci_controller au1x_controller = {
- .pci_ops = &au1x_pci_ops,
- .io_resource = &pci_io_resource,
- .mem_resource = &pci_mem_resource,
-};
-
-#if defined(CONFIG_SOC_AU1500) || defined(CONFIG_SOC_AU1550)
-static unsigned long virt_io_addr;
-#endif
-
-static int __init au1x_pci_setup(void)
-{
- extern void au1x_pci_cfg_init(void);
-
-#if defined(CONFIG_SOC_AU1500) || defined(CONFIG_SOC_AU1550)
- virt_io_addr = (unsigned long)ioremap(Au1500_PCI_IO_START,
- Au1500_PCI_IO_END - Au1500_PCI_IO_START + 1);
-
- if (!virt_io_addr) {
- printk(KERN_ERR "Unable to ioremap pci space\n");
- return 1;
- }
- au1x_controller.io_map_base = virt_io_addr;
-
-#ifdef CONFIG_DMA_NONCOHERENT
- {
- /*
- * Set the NC bit in controller for Au1500 pre-AC silicon
- */
- u32 prid = read_c0_prid();
-
- if ((prid & 0xFF000000) == 0x01000000 && prid < 0x01030202) {
- au_writel((1 << 16) | au_readl(Au1500_PCI_CFG),
- Au1500_PCI_CFG);
- printk(KERN_INFO "Non-coherent PCI accesses enabled\n");
- }
- }
-#endif
-
- set_io_port_base(virt_io_addr);
-#endif
-
- au1x_pci_cfg_init();
-
- register_pci_controller(&au1x_controller);
- return 0;
-}
-
-arch_initcall(au1x_pci_setup);
diff --git a/arch/mips/alchemy/common/platform.c b/arch/mips/alchemy/common/platform.c
index f72c48d..c8e5d72 100644
--- a/arch/mips/alchemy/common/platform.c
+++ b/arch/mips/alchemy/common/platform.c
@@ -18,7 +18,7 @@
#include <linux/serial_8250.h>
#include <linux/slab.h>
-#include <asm/mach-au1x00/au1xxx.h>
+#include <asm/mach-au1x00/au1000.h>
#include <asm/mach-au1x00/au1xxx_dbdma.h>
#include <asm/mach-au1x00/au1100_mmc.h>
#include <asm/mach-au1x00/au1xxx_eth.h>
@@ -111,270 +111,87 @@ static void __init alchemy_setup_uarts(int ctype)
printk(KERN_INFO "Alchemy: failed to register UARTs\n");
}
-/* OHCI (USB full speed host controller) */
-static struct resource au1xxx_usb_ohci_resources[] = {
- [0] = {
- .start = USB_OHCI_BASE,
- .end = USB_OHCI_BASE + USB_OHCI_LEN - 1,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = FOR_PLATFORM_C_USB_HOST_INT,
- .end = FOR_PLATFORM_C_USB_HOST_INT,
- .flags = IORESOURCE_IRQ,
- },
-};
-
-/* The dmamask must be set for OHCI to work */
-static u64 ohci_dmamask = DMA_BIT_MASK(32);
-
-static struct platform_device au1xxx_usb_ohci_device = {
- .name = "au1xxx-ohci",
- .id = 0,
- .dev = {
- .dma_mask = &ohci_dmamask,
- .coherent_dma_mask = DMA_BIT_MASK(32),
- },
- .num_resources = ARRAY_SIZE(au1xxx_usb_ohci_resources),
- .resource = au1xxx_usb_ohci_resources,
-};
-
-/*** AU1100 LCD controller ***/
-
-#ifdef CONFIG_FB_AU1100
-static struct resource au1100_lcd_resources[] = {
- [0] = {
- .start = LCD_PHYS_ADDR,
- .end = LCD_PHYS_ADDR + 0x800 - 1,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = AU1100_LCD_INT,
- .end = AU1100_LCD_INT,
- .flags = IORESOURCE_IRQ,
- }
-};
-
-static u64 au1100_lcd_dmamask = DMA_BIT_MASK(32);
-
-static struct platform_device au1100_lcd_device = {
- .name = "au1100-lcd",
- .id = 0,
- .dev = {
- .dma_mask = &au1100_lcd_dmamask,
- .coherent_dma_mask = DMA_BIT_MASK(32),
- },
- .num_resources = ARRAY_SIZE(au1100_lcd_resources),
- .resource = au1100_lcd_resources,
-};
-#endif
-
-#ifdef CONFIG_SOC_AU1200
-/* EHCI (USB high speed host controller) */
-static struct resource au1xxx_usb_ehci_resources[] = {
- [0] = {
- .start = USB_EHCI_BASE,
- .end = USB_EHCI_BASE + USB_EHCI_LEN - 1,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = AU1200_USB_INT,
- .end = AU1200_USB_INT,
- .flags = IORESOURCE_IRQ,
- },
-};
-
-static u64 ehci_dmamask = DMA_BIT_MASK(32);
-
-static struct platform_device au1xxx_usb_ehci_device = {
- .name = "au1xxx-ehci",
- .id = 0,
- .dev = {
- .dma_mask = &ehci_dmamask,
- .coherent_dma_mask = DMA_BIT_MASK(32),
- },
- .num_resources = ARRAY_SIZE(au1xxx_usb_ehci_resources),
- .resource = au1xxx_usb_ehci_resources,
-};
-
-/* Au1200 UDC (USB gadget controller) */
-static struct resource au1xxx_usb_gdt_resources[] = {
- [0] = {
- .start = USB_UDC_BASE,
- .end = USB_UDC_BASE + USB_UDC_LEN - 1,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = AU1200_USB_INT,
- .end = AU1200_USB_INT,
- .flags = IORESOURCE_IRQ,
- },
-};
-
-static u64 udc_dmamask = DMA_BIT_MASK(32);
-static struct platform_device au1xxx_usb_gdt_device = {
- .name = "au1xxx-udc",
- .id = 0,
- .dev = {
- .dma_mask = &udc_dmamask,
- .coherent_dma_mask = DMA_BIT_MASK(32),
- },
- .num_resources = ARRAY_SIZE(au1xxx_usb_gdt_resources),
- .resource = au1xxx_usb_gdt_resources,
-};
+/* The dmamask must be set for OHCI/EHCI to work */
+static u64 alchemy_ohci_dmamask = DMA_BIT_MASK(32);
+static u64 __maybe_unused alchemy_ehci_dmamask = DMA_BIT_MASK(32);
-/* Au1200 UOC (USB OTG controller) */
-static struct resource au1xxx_usb_otg_resources[] = {
- [0] = {
- .start = USB_UOC_BASE,
- .end = USB_UOC_BASE + USB_UOC_LEN - 1,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = AU1200_USB_INT,
- .end = AU1200_USB_INT,
- .flags = IORESOURCE_IRQ,
- },
+static unsigned long alchemy_ohci_data[][2] __initdata = {
+ [ALCHEMY_CPU_AU1000] = { AU1000_USB_OHCI_PHYS_ADDR, AU1000_USB_HOST_INT },
+ [ALCHEMY_CPU_AU1500] = { AU1000_USB_OHCI_PHYS_ADDR, AU1500_USB_HOST_INT },
+ [ALCHEMY_CPU_AU1100] = { AU1000_USB_OHCI_PHYS_ADDR, AU1100_USB_HOST_INT },
+ [ALCHEMY_CPU_AU1550] = { AU1550_USB_OHCI_PHYS_ADDR, AU1550_USB_HOST_INT },
+ [ALCHEMY_CPU_AU1200] = { AU1200_USB_OHCI_PHYS_ADDR, AU1200_USB_INT },
};
-static u64 uoc_dmamask = DMA_BIT_MASK(32);
-
-static struct platform_device au1xxx_usb_otg_device = {
- .name = "au1xxx-uoc",
- .id = 0,
- .dev = {
- .dma_mask = &uoc_dmamask,
- .coherent_dma_mask = DMA_BIT_MASK(32),
- },
- .num_resources = ARRAY_SIZE(au1xxx_usb_otg_resources),
- .resource = au1xxx_usb_otg_resources,
+static unsigned long alchemy_ehci_data[][2] __initdata = {
+ [ALCHEMY_CPU_AU1200] = { AU1200_USB_EHCI_PHYS_ADDR, AU1200_USB_INT },
};
-static struct resource au1200_lcd_resources[] = {
- [0] = {
- .start = LCD_PHYS_ADDR,
- .end = LCD_PHYS_ADDR + 0x800 - 1,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = AU1200_LCD_INT,
- .end = AU1200_LCD_INT,
- .flags = IORESOURCE_IRQ,
+static int __init _new_usbres(struct resource **r, struct platform_device **d)
+{
+ *r = kzalloc(sizeof(struct resource) * 2, GFP_KERNEL);
+ if (!*r)
+ return -ENOMEM;
+ *d = kzalloc(sizeof(struct platform_device), GFP_KERNEL);
+ if (!*d) {
+ kfree(*r);
+ return -ENOMEM;
}
-};
-
-static u64 au1200_lcd_dmamask = DMA_BIT_MASK(32);
-
-static struct platform_device au1200_lcd_device = {
- .name = "au1200-lcd",
- .id = 0,
- .dev = {
- .dma_mask = &au1200_lcd_dmamask,
- .coherent_dma_mask = DMA_BIT_MASK(32),
- },
- .num_resources = ARRAY_SIZE(au1200_lcd_resources),
- .resource = au1200_lcd_resources,
-};
-static u64 au1xxx_mmc_dmamask = DMA_BIT_MASK(32);
+ (*d)->dev.coherent_dma_mask = DMA_BIT_MASK(32);
+ (*d)->num_resources = 2;
+ (*d)->resource = *r;
-extern struct au1xmmc_platform_data au1xmmc_platdata[2];
+ return 0;
+}
-static struct resource au1200_mmc0_resources[] = {
- [0] = {
- .start = AU1100_SD0_PHYS_ADDR,
- .end = AU1100_SD0_PHYS_ADDR + 0xfff,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = AU1200_SD_INT,
- .end = AU1200_SD_INT,
- .flags = IORESOURCE_IRQ,
- },
- [2] = {
- .start = DSCR_CMD0_SDMS_TX0,
- .end = DSCR_CMD0_SDMS_TX0,
- .flags = IORESOURCE_DMA,
- },
- [3] = {
- .start = DSCR_CMD0_SDMS_RX0,
- .end = DSCR_CMD0_SDMS_RX0,
- .flags = IORESOURCE_DMA,
- }
-};
+static void __init alchemy_setup_usb(int ctype)
+{
+ struct resource *res;
+ struct platform_device *pdev;
-static struct platform_device au1200_mmc0_device = {
- .name = "au1xxx-mmc",
- .id = 0,
- .dev = {
- .dma_mask = &au1xxx_mmc_dmamask,
- .coherent_dma_mask = DMA_BIT_MASK(32),
- .platform_data = &au1xmmc_platdata[0],
- },
- .num_resources = ARRAY_SIZE(au1200_mmc0_resources),
- .resource = au1200_mmc0_resources,
-};
+ /* setup OHCI0. Every variant has one */
+ if (_new_usbres(&res, &pdev))
+ return;
-#ifndef CONFIG_MIPS_DB1200
-static struct resource au1200_mmc1_resources[] = {
- [0] = {
- .start = AU1100_SD1_PHYS_ADDR,
- .end = AU1100_SD1_PHYS_ADDR + 0xfff,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = AU1200_SD_INT,
- .end = AU1200_SD_INT,
- .flags = IORESOURCE_IRQ,
- },
- [2] = {
- .start = DSCR_CMD0_SDMS_TX1,
- .end = DSCR_CMD0_SDMS_TX1,
- .flags = IORESOURCE_DMA,
- },
- [3] = {
- .start = DSCR_CMD0_SDMS_RX1,
- .end = DSCR_CMD0_SDMS_RX1,
- .flags = IORESOURCE_DMA,
+ res[0].start = alchemy_ohci_data[ctype][0];
+ res[0].end = res[0].start + 0x100 - 1;
+ res[0].flags = IORESOURCE_MEM;
+ res[1].start = alchemy_ohci_data[ctype][1];
+ res[1].end = res[1].start;
+ res[1].flags = IORESOURCE_IRQ;
+ pdev->name = "au1xxx-ohci";
+ pdev->id = 0;
+ pdev->dev.dma_mask = &alchemy_ohci_dmamask;
+
+ if (platform_device_register(pdev))
+ printk(KERN_INFO "Alchemy USB: cannot add OHCI0\n");
+
+
+ /* setup EHCI0: Au1200 */
+ if (ctype == ALCHEMY_CPU_AU1200) {
+ if (_new_usbres(&res, &pdev))
+ return;
+
+ res[0].start = alchemy_ehci_data[ctype][0];
+ res[0].end = res[0].start + 0x100 - 1;
+ res[0].flags = IORESOURCE_MEM;
+ res[1].start = alchemy_ehci_data[ctype][1];
+ res[1].end = res[1].start;
+ res[1].flags = IORESOURCE_IRQ;
+ pdev->name = "au1xxx-ehci";
+ pdev->id = 0;
+ pdev->dev.dma_mask = &alchemy_ehci_dmamask;
+
+ if (platform_device_register(pdev))
+ printk(KERN_INFO "Alchemy USB: cannot add EHCI0\n");
}
-};
-
-static struct platform_device au1200_mmc1_device = {
- .name = "au1xxx-mmc",
- .id = 1,
- .dev = {
- .dma_mask = &au1xxx_mmc_dmamask,
- .coherent_dma_mask = DMA_BIT_MASK(32),
- .platform_data = &au1xmmc_platdata[1],
- },
- .num_resources = ARRAY_SIZE(au1200_mmc1_resources),
- .resource = au1200_mmc1_resources,
-};
-#endif /* #ifndef CONFIG_MIPS_DB1200 */
-#endif /* #ifdef CONFIG_SOC_AU1200 */
-
-/* All Alchemy demoboards with I2C have this #define in their headers */
-#ifdef SMBUS_PSC_BASE
-static struct resource pbdb_smbus_resources[] = {
- {
- .start = CPHYSADDR(SMBUS_PSC_BASE),
- .end = CPHYSADDR(SMBUS_PSC_BASE + 0xfffff),
- .flags = IORESOURCE_MEM,
- },
-};
-
-static struct platform_device pbdb_smbus_device = {
- .name = "au1xpsc_smbus",
- .id = 0, /* bus number */
- .num_resources = ARRAY_SIZE(pbdb_smbus_resources),
- .resource = pbdb_smbus_resources,
-};
-#endif
+}
/* Macro to help defining the Ethernet MAC resources */
-#define MAC_RES_COUNT 3 /* MAC regs base, MAC enable reg, MAC INT */
-#define MAC_RES(_base, _enable, _irq) \
+#define MAC_RES_COUNT 4 /* MAC regs, MAC en, MAC INT, MACDMA regs */
+#define MAC_RES(_base, _enable, _irq, _macdma) \
{ \
.start = _base, \
.end = _base + 0xffff, \
@@ -389,28 +206,37 @@ static struct platform_device pbdb_smbus_device = {
.start = _irq, \
.end = _irq, \
.flags = IORESOURCE_IRQ \
+ }, \
+ { \
+ .start = _macdma, \
+ .end = _macdma + 0x1ff, \
+ .flags = IORESOURCE_MEM, \
}
static struct resource au1xxx_eth0_resources[][MAC_RES_COUNT] __initdata = {
[ALCHEMY_CPU_AU1000] = {
MAC_RES(AU1000_MAC0_PHYS_ADDR,
AU1000_MACEN_PHYS_ADDR,
- AU1000_MAC0_DMA_INT)
+ AU1000_MAC0_DMA_INT,
+ AU1000_MACDMA0_PHYS_ADDR)
},
[ALCHEMY_CPU_AU1500] = {
MAC_RES(AU1500_MAC0_PHYS_ADDR,
AU1500_MACEN_PHYS_ADDR,
- AU1500_MAC0_DMA_INT)
+ AU1500_MAC0_DMA_INT,
+ AU1000_MACDMA0_PHYS_ADDR)
},
[ALCHEMY_CPU_AU1100] = {
MAC_RES(AU1000_MAC0_PHYS_ADDR,
AU1000_MACEN_PHYS_ADDR,
- AU1100_MAC0_DMA_INT)
+ AU1100_MAC0_DMA_INT,
+ AU1000_MACDMA0_PHYS_ADDR)
},
[ALCHEMY_CPU_AU1550] = {
MAC_RES(AU1000_MAC0_PHYS_ADDR,
AU1000_MACEN_PHYS_ADDR,
- AU1550_MAC0_DMA_INT)
+ AU1550_MAC0_DMA_INT,
+ AU1000_MACDMA0_PHYS_ADDR)
},
};
@@ -429,17 +255,20 @@ static struct resource au1xxx_eth1_resources[][MAC_RES_COUNT] __initdata = {
[ALCHEMY_CPU_AU1000] = {
MAC_RES(AU1000_MAC1_PHYS_ADDR,
AU1000_MACEN_PHYS_ADDR + 4,
- AU1000_MAC1_DMA_INT)
+ AU1000_MAC1_DMA_INT,
+ AU1000_MACDMA1_PHYS_ADDR)
},
[ALCHEMY_CPU_AU1500] = {
MAC_RES(AU1500_MAC1_PHYS_ADDR,
AU1500_MACEN_PHYS_ADDR + 4,
- AU1500_MAC1_DMA_INT)
+ AU1500_MAC1_DMA_INT,
+ AU1000_MACDMA1_PHYS_ADDR)
},
[ALCHEMY_CPU_AU1550] = {
MAC_RES(AU1000_MAC1_PHYS_ADDR,
AU1000_MACEN_PHYS_ADDR + 4,
- AU1550_MAC1_DMA_INT)
+ AU1550_MAC1_DMA_INT,
+ AU1000_MACDMA1_PHYS_ADDR)
},
};
@@ -521,36 +350,15 @@ static void __init alchemy_setup_macs(int ctype)
}
}
-static struct platform_device *au1xxx_platform_devices[] __initdata = {
- &au1xxx_usb_ohci_device,
-#ifdef CONFIG_FB_AU1100
- &au1100_lcd_device,
-#endif
-#ifdef CONFIG_SOC_AU1200
- &au1xxx_usb_ehci_device,
- &au1xxx_usb_gdt_device,
- &au1xxx_usb_otg_device,
- &au1200_lcd_device,
- &au1200_mmc0_device,
-#ifndef CONFIG_MIPS_DB1200
- &au1200_mmc1_device,
-#endif
-#endif
-#ifdef SMBUS_PSC_BASE
- &pbdb_smbus_device,
-#endif
-};
-
static int __init au1xxx_platform_init(void)
{
- int err, ctype = alchemy_get_cputype();
+ int ctype = alchemy_get_cputype();
alchemy_setup_uarts(ctype);
alchemy_setup_macs(ctype);
+ alchemy_setup_usb(ctype);
- err = platform_add_devices(au1xxx_platform_devices,
- ARRAY_SIZE(au1xxx_platform_devices));
- return err;
+ return 0;
}
arch_initcall(au1xxx_platform_init);
diff --git a/arch/mips/alchemy/common/power.c b/arch/mips/alchemy/common/power.c
index b86324a..bdd6651 100644
--- a/arch/mips/alchemy/common/power.c
+++ b/arch/mips/alchemy/common/power.c
@@ -37,8 +37,6 @@
#include <asm/uaccess.h>
#include <asm/mach-au1x00/au1000.h>
-#ifdef CONFIG_PM
-
/*
* We need to save/restore a bunch of core registers that are
* either volatile or reset to some state across a processor sleep.
@@ -49,7 +47,6 @@
* We only have to save/restore registers that aren't otherwise
* done as part of a driver pm_* function.
*/
-static unsigned int sleep_usb[2];
static unsigned int sleep_sys_clocks[5];
static unsigned int sleep_sys_pinfunc;
static unsigned int sleep_static_memctlr[4][3];
@@ -57,31 +54,6 @@ static unsigned int sleep_static_memctlr[4][3];
static void save_core_regs(void)
{
-#ifndef CONFIG_SOC_AU1200
- /* Shutdown USB host/device. */
- sleep_usb[0] = au_readl(USB_HOST_CONFIG);
-
- /* There appears to be some undocumented reset register.... */
- au_writel(0, 0xb0100004);
- au_sync();
- au_writel(0, USB_HOST_CONFIG);
- au_sync();
-
- sleep_usb[1] = au_readl(USBD_ENABLE);
- au_writel(0, USBD_ENABLE);
- au_sync();
-
-#else /* AU1200 */
-
- /* enable access to OTG mmio so we can save OTG CAP/MUX.
- * FIXME: write an OTG driver and move this stuff there!
- */
- au_writel(au_readl(USB_MSR_BASE + 4) | (1 << 6), USB_MSR_BASE + 4);
- au_sync();
- sleep_usb[0] = au_readl(0xb4020020); /* OTG_CAP */
- sleep_usb[1] = au_readl(0xb4020024); /* OTG_MUX */
-#endif
-
/* Clocks and PLLs. */
sleep_sys_clocks[0] = au_readl(SYS_FREQCTRL0);
sleep_sys_clocks[1] = au_readl(SYS_FREQCTRL1);
@@ -125,22 +97,6 @@ static void restore_core_regs(void)
au_writel(sleep_sys_pinfunc, SYS_PINFUNC);
au_sync();
-#ifndef CONFIG_SOC_AU1200
- au_writel(sleep_usb[0], USB_HOST_CONFIG);
- au_writel(sleep_usb[1], USBD_ENABLE);
- au_sync();
-#else
- /* enable access to OTG memory */
- au_writel(au_readl(USB_MSR_BASE + 4) | (1 << 6), USB_MSR_BASE + 4);
- au_sync();
-
- /* restore OTG caps and port mux. */
- au_writel(sleep_usb[0], 0xb4020020 + 0); /* OTG_CAP */
- au_sync();
- au_writel(sleep_usb[1], 0xb4020020 + 4); /* OTG_MUX */
- au_sync();
-#endif
-
/* Restore the static memory controller configuration. */
au_writel(sleep_static_memctlr[0][0], MEM_STCFG0);
au_writel(sleep_static_memctlr[0][1], MEM_STTIME0);
@@ -174,5 +130,3 @@ void au_sleep(void)
restore_core_regs();
}
-
-#endif /* CONFIG_PM */
diff --git a/arch/mips/alchemy/common/setup.c b/arch/mips/alchemy/common/setup.c
index 1b887c8..37ffd99 100644
--- a/arch/mips/alchemy/common/setup.c
+++ b/arch/mips/alchemy/common/setup.c
@@ -73,8 +73,8 @@ void __init plat_mem_setup(void)
/* This routine should be valid for all Au1x based boards */
phys_t __fixup_bigphys_addr(phys_t phys_addr, phys_t size)
{
- u32 start = (u32)Au1500_PCI_MEM_START;
- u32 end = (u32)Au1500_PCI_MEM_END;
+ unsigned long start = ALCHEMY_PCI_MEMWIN_START;
+ unsigned long end = ALCHEMY_PCI_MEMWIN_END;
/* Don't fixup 36-bit addresses */
if ((phys_addr >> 32) != 0)
@@ -82,7 +82,7 @@ phys_t __fixup_bigphys_addr(phys_t phys_addr, phys_t size)
/* Check for PCI memory window */
if (phys_addr >= start && (phys_addr + size - 1) <= end)
- return (phys_t)((phys_addr - start) + Au1500_PCI_MEM_START);
+ return (phys_t)(AU1500_PCI_MEM_PHYS_ADDR + phys_addr);
/* default nop */
return phys_addr;
diff --git a/arch/mips/alchemy/devboards/db1200/platform.c b/arch/mips/alchemy/devboards/db1200/platform.c
index dda090b..c61867c 100644
--- a/arch/mips/alchemy/devboards/db1200/platform.c
+++ b/arch/mips/alchemy/devboards/db1200/platform.c
@@ -213,7 +213,12 @@ static struct resource db1200_ide_res[] = {
.start = DB1200_IDE_INT,
.end = DB1200_IDE_INT,
.flags = IORESOURCE_IRQ,
- }
+ },
+ [2] = {
+ .start = AU1200_DSCR_CMD0_DMA_REQ1,
+ .end = AU1200_DSCR_CMD0_DMA_REQ1,
+ .flags = IORESOURCE_DMA,
+ },
};
static u64 ide_dmamask = DMA_BIT_MASK(32);
@@ -328,23 +333,85 @@ static struct led_classdev db1200_mmc_led = {
.brightness_set = db1200_mmcled_set,
};
-/* needed by arch/mips/alchemy/common/platform.c */
-struct au1xmmc_platform_data au1xmmc_platdata[] = {
+static struct au1xmmc_platform_data db1200mmc_platdata = {
+ .cd_setup = db1200_mmc_cd_setup,
+ .set_power = db1200_mmc_set_power,
+ .card_inserted = db1200_mmc_card_inserted,
+ .card_readonly = db1200_mmc_card_readonly,
+ .led = &db1200_mmc_led,
+};
+
+static struct resource au1200_mmc0_resources[] = {
[0] = {
- .cd_setup = db1200_mmc_cd_setup,
- .set_power = db1200_mmc_set_power,
- .card_inserted = db1200_mmc_card_inserted,
- .card_readonly = db1200_mmc_card_readonly,
- .led = &db1200_mmc_led,
+ .start = AU1100_SD0_PHYS_ADDR,
+ .end = AU1100_SD0_PHYS_ADDR + 0xfff,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = AU1200_SD_INT,
+ .end = AU1200_SD_INT,
+ .flags = IORESOURCE_IRQ,
+ },
+ [2] = {
+ .start = AU1200_DSCR_CMD0_SDMS_TX0,
+ .end = AU1200_DSCR_CMD0_SDMS_TX0,
+ .flags = IORESOURCE_DMA,
+ },
+ [3] = {
+ .start = AU1200_DSCR_CMD0_SDMS_RX0,
+ .end = AU1200_DSCR_CMD0_SDMS_RX0,
+ .flags = IORESOURCE_DMA,
+ }
+};
+
+static u64 au1xxx_mmc_dmamask = DMA_BIT_MASK(32);
+
+static struct platform_device db1200_mmc0_dev = {
+ .name = "au1xxx-mmc",
+ .id = 0,
+ .dev = {
+ .dma_mask = &au1xxx_mmc_dmamask,
+ .coherent_dma_mask = DMA_BIT_MASK(32),
+ .platform_data = &db1200mmc_platdata,
+ },
+ .num_resources = ARRAY_SIZE(au1200_mmc0_resources),
+ .resource = au1200_mmc0_resources,
+};
+
+/**********************************************************************/
+
+static struct resource au1200_lcd_res[] = {
+ [0] = {
+ .start = AU1200_LCD_PHYS_ADDR,
+ .end = AU1200_LCD_PHYS_ADDR + 0x800 - 1,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = AU1200_LCD_INT,
+ .end = AU1200_LCD_INT,
+ .flags = IORESOURCE_IRQ,
+ }
+};
+
+static u64 au1200_lcd_dmamask = DMA_BIT_MASK(32);
+
+static struct platform_device au1200_lcd_dev = {
+ .name = "au1200-lcd",
+ .id = 0,
+ .dev = {
+ .dma_mask = &au1200_lcd_dmamask,
+ .coherent_dma_mask = DMA_BIT_MASK(32),
},
+ .num_resources = ARRAY_SIZE(au1200_lcd_res),
+ .resource = au1200_lcd_res,
};
/**********************************************************************/
static struct resource au1200_psc0_res[] = {
[0] = {
- .start = PSC0_PHYS_ADDR,
- .end = PSC0_PHYS_ADDR + 0x000fffff,
+ .start = AU1550_PSC0_PHYS_ADDR,
+ .end = AU1550_PSC0_PHYS_ADDR + 0xfff,
.flags = IORESOURCE_MEM,
},
[1] = {
@@ -353,13 +420,13 @@ static struct resource au1200_psc0_res[] = {
.flags = IORESOURCE_IRQ,
},
[2] = {
- .start = DSCR_CMD0_PSC0_TX,
- .end = DSCR_CMD0_PSC0_TX,
+ .start = AU1200_DSCR_CMD0_PSC0_TX,
+ .end = AU1200_DSCR_CMD0_PSC0_TX,
.flags = IORESOURCE_DMA,
},
[3] = {
- .start = DSCR_CMD0_PSC0_RX,
- .end = DSCR_CMD0_PSC0_RX,
+ .start = AU1200_DSCR_CMD0_PSC0_RX,
+ .end = AU1200_DSCR_CMD0_PSC0_RX,
.flags = IORESOURCE_DMA,
},
};
@@ -401,8 +468,8 @@ static struct platform_device db1200_spi_dev = {
static struct resource au1200_psc1_res[] = {
[0] = {
- .start = PSC1_PHYS_ADDR,
- .end = PSC1_PHYS_ADDR + 0x000fffff,
+ .start = AU1550_PSC1_PHYS_ADDR,
+ .end = AU1550_PSC1_PHYS_ADDR + 0xfff,
.flags = IORESOURCE_MEM,
},
[1] = {
@@ -411,13 +478,13 @@ static struct resource au1200_psc1_res[] = {
.flags = IORESOURCE_IRQ,
},
[2] = {
- .start = DSCR_CMD0_PSC1_TX,
- .end = DSCR_CMD0_PSC1_TX,
+ .start = AU1200_DSCR_CMD0_PSC1_TX,
+ .end = AU1200_DSCR_CMD0_PSC1_TX,
.flags = IORESOURCE_DMA,
},
[3] = {
- .start = DSCR_CMD0_PSC1_RX,
- .end = DSCR_CMD0_PSC1_RX,
+ .start = AU1200_DSCR_CMD0_PSC1_RX,
+ .end = AU1200_DSCR_CMD0_PSC1_RX,
.flags = IORESOURCE_DMA,
},
};
@@ -449,6 +516,8 @@ static struct platform_device db1200_audiodma_dev = {
static struct platform_device *db1200_devs[] __initdata = {
NULL, /* PSC0, selected by S6.8 */
&db1200_ide_dev,
+ &db1200_mmc0_dev,
+ &au1200_lcd_dev,
&db1200_eth_dev,
&db1200_rtc_dev,
&db1200_nand_dev,
@@ -526,32 +595,28 @@ static int __init db1200_dev_init(void)
/* Audio PSC clock is supplied externally. (FIXME: platdata!!) */
__raw_writel(PSC_SEL_CLK_SERCLK,
- (void __iomem *)KSEG1ADDR(PSC1_PHYS_ADDR) + PSC_SEL_OFFSET);
+ (void __iomem *)KSEG1ADDR(AU1550_PSC1_PHYS_ADDR) + PSC_SEL_OFFSET);
wmb();
- db1x_register_pcmcia_socket(PCMCIA_ATTR_PHYS_ADDR,
- PCMCIA_ATTR_PHYS_ADDR + 0x000400000 - 1,
- PCMCIA_MEM_PHYS_ADDR,
- PCMCIA_MEM_PHYS_ADDR + 0x000400000 - 1,
- PCMCIA_IO_PHYS_ADDR,
- PCMCIA_IO_PHYS_ADDR + 0x000010000 - 1,
- DB1200_PC0_INT,
- DB1200_PC0_INSERT_INT,
- /*DB1200_PC0_STSCHG_INT*/0,
- DB1200_PC0_EJECT_INT,
- 0);
-
- db1x_register_pcmcia_socket(PCMCIA_ATTR_PHYS_ADDR + 0x004000000,
- PCMCIA_ATTR_PHYS_ADDR + 0x004400000 - 1,
- PCMCIA_MEM_PHYS_ADDR + 0x004000000,
- PCMCIA_MEM_PHYS_ADDR + 0x004400000 - 1,
- PCMCIA_IO_PHYS_ADDR + 0x004000000,
- PCMCIA_IO_PHYS_ADDR + 0x004010000 - 1,
- DB1200_PC1_INT,
- DB1200_PC1_INSERT_INT,
- /*DB1200_PC1_STSCHG_INT*/0,
- DB1200_PC1_EJECT_INT,
- 1);
+ db1x_register_pcmcia_socket(
+ AU1000_PCMCIA_ATTR_PHYS_ADDR,
+ AU1000_PCMCIA_ATTR_PHYS_ADDR + 0x000400000 - 1,
+ AU1000_PCMCIA_MEM_PHYS_ADDR,
+ AU1000_PCMCIA_MEM_PHYS_ADDR + 0x000400000 - 1,
+ AU1000_PCMCIA_IO_PHYS_ADDR,
+ AU1000_PCMCIA_IO_PHYS_ADDR + 0x000010000 - 1,
+ DB1200_PC0_INT, DB1200_PC0_INSERT_INT,
+ /*DB1200_PC0_STSCHG_INT*/0, DB1200_PC0_EJECT_INT, 0);
+
+ db1x_register_pcmcia_socket(
+ AU1000_PCMCIA_ATTR_PHYS_ADDR + 0x004000000,
+ AU1000_PCMCIA_ATTR_PHYS_ADDR + 0x004400000 - 1,
+ AU1000_PCMCIA_MEM_PHYS_ADDR + 0x004000000,
+ AU1000_PCMCIA_MEM_PHYS_ADDR + 0x004400000 - 1,
+ AU1000_PCMCIA_IO_PHYS_ADDR + 0x004000000,
+ AU1000_PCMCIA_IO_PHYS_ADDR + 0x004010000 - 1,
+ DB1200_PC1_INT, DB1200_PC1_INSERT_INT,
+ /*DB1200_PC1_STSCHG_INT*/0, DB1200_PC1_EJECT_INT, 1);
swapped = bcsr_read(BCSR_STATUS) & BCSR_STATUS_DB1200_SWAPBOOT;
db1x_register_norflash(64 << 20, 2, swapped);
diff --git a/arch/mips/alchemy/devboards/db1x00/board_setup.c b/arch/mips/alchemy/devboards/db1x00/board_setup.c
index 5c956fe..7cd36e6 100644
--- a/arch/mips/alchemy/devboards/db1x00/board_setup.c
+++ b/arch/mips/alchemy/devboards/db1x00/board_setup.c
@@ -40,24 +40,6 @@
#include <prom.h>
-#ifdef CONFIG_MIPS_DB1500
-char irq_tab_alchemy[][5] __initdata = {
- [12] = { -1, AU1500_PCI_INTA, 0xff, 0xff, 0xff }, /* IDSEL 12 - HPT371 */
- [13] = { -1, AU1500_PCI_INTA, AU1500_PCI_INTB, AU1500_PCI_INTC, AU1500_PCI_INTD }, /* IDSEL 13 - PCI slot */
-};
-
-#endif
-
-
-#ifdef CONFIG_MIPS_DB1550
-char irq_tab_alchemy[][5] __initdata = {
- [11] = { -1, AU1550_PCI_INTC, 0xff, 0xff, 0xff }, /* IDSEL 11 - on-board HPT371 */
- [12] = { -1, AU1550_PCI_INTB, AU1550_PCI_INTC, AU1550_PCI_INTD, AU1550_PCI_INTA }, /* IDSEL 12 - PCI slot 2 (left) */
- [13] = { -1, AU1550_PCI_INTA, AU1550_PCI_INTB, AU1550_PCI_INTC, AU1550_PCI_INTD }, /* IDSEL 13 - PCI slot 1 (right) */
-};
-#endif
-
-
#ifdef CONFIG_MIPS_BOSPORUS
char irq_tab_alchemy[][5] __initdata = {
[11] = { -1, AU1500_PCI_INTA, AU1500_PCI_INTB, 0xff, 0xff }, /* IDSEL 11 - miniPCI */
@@ -91,12 +73,6 @@ const char *get_system_type(void)
#ifdef CONFIG_MIPS_MIRAGE
-char irq_tab_alchemy[][5] __initdata = {
- [11] = { -1, AU1500_PCI_INTD, 0xff, 0xff, 0xff }, /* IDSEL 11 - SMI VGX */
- [12] = { -1, 0xff, 0xff, AU1500_PCI_INTC, 0xff }, /* IDSEL 12 - PNX1300 */
- [13] = { -1, AU1500_PCI_INTA, AU1500_PCI_INTB, 0xff, 0xff }, /* IDSEL 13 - miniPCI */
-};
-
static void mirage_power_off(void)
{
alchemy_gpio_direction_output(210, 1);
@@ -158,9 +134,7 @@ void __init board_setup(void)
/* initialize board register space */
bcsr_init(bcsr1, bcsr2);
- /* Not valid for Au1550 */
-#if defined(CONFIG_IRDA) && \
- (defined(CONFIG_SOC_AU1000) || defined(CONFIG_SOC_AU1100))
+#if defined(CONFIG_IRDA) && defined(CONFIG_AU1000_FIR)
{
u32 pin_func;
diff --git a/arch/mips/alchemy/devboards/db1x00/platform.c b/arch/mips/alchemy/devboards/db1x00/platform.c
index 7057d28..9e6b3d4 100644
--- a/arch/mips/alchemy/devboards/db1x00/platform.c
+++ b/arch/mips/alchemy/devboards/db1x00/platform.c
@@ -20,14 +20,16 @@
#include <linux/init.h>
#include <linux/interrupt.h>
+#include <linux/dma-mapping.h>
#include <linux/platform_device.h>
#include <asm/mach-au1x00/au1000.h>
#include <asm/mach-au1x00/au1000_dma.h>
-#include <asm/mach-au1x00/au1xxx.h>
#include <asm/mach-db1x00/bcsr.h>
#include "../platform.h"
+struct pci_dev;
+
/* DB1xxx PCMCIA interrupt sources:
* CD0/1 GPIO0/3
* STSCHG0/1 GPIO1/4
@@ -88,6 +90,155 @@
#endif
#endif
+#ifdef CONFIG_PCI
+#ifdef CONFIG_MIPS_DB1500
+static int db1xxx_map_pci_irq(const struct pci_dev *d, u8 slot, u8 pin)
+{
+ if ((slot < 12) || (slot > 13) || pin == 0)
+ return -1;
+ if (slot == 12)
+ return (pin == 1) ? AU1500_PCI_INTA : 0xff;
+ if (slot == 13) {
+ switch (pin) {
+ case 1: return AU1500_PCI_INTA;
+ case 2: return AU1500_PCI_INTB;
+ case 3: return AU1500_PCI_INTC;
+ case 4: return AU1500_PCI_INTD;
+ }
+ }
+ return -1;
+}
+#endif
+
+#ifdef CONFIG_MIPS_DB1550
+static int db1xxx_map_pci_irq(const struct pci_dev *d, u8 slot, u8 pin)
+{
+ if ((slot < 11) || (slot > 13) || pin == 0)
+ return -1;
+ if (slot == 11)
+ return (pin == 1) ? AU1550_PCI_INTC : 0xff;
+ if (slot == 12) {
+ switch (pin) {
+ case 1: return AU1550_PCI_INTB;
+ case 2: return AU1550_PCI_INTC;
+ case 3: return AU1550_PCI_INTD;
+ case 4: return AU1550_PCI_INTA;
+ }
+ }
+ if (slot == 13) {
+ switch (pin) {
+ case 1: return AU1550_PCI_INTA;
+ case 2: return AU1550_PCI_INTB;
+ case 3: return AU1550_PCI_INTC;
+ case 4: return AU1550_PCI_INTD;
+ }
+ }
+ return -1;
+}
+#endif
+
+#ifdef CONFIG_MIPS_BOSPORUS
+static int db1xxx_map_pci_irq(const struct pci_dev *d, u8 slot, u8 pin)
+{
+ if ((slot < 11) || (slot > 13) || pin == 0)
+ return -1;
+ if (slot == 12)
+ return (pin == 1) ? AU1500_PCI_INTA : 0xff;
+ if (slot == 11) {
+ switch (pin) {
+ case 1: return AU1500_PCI_INTA;
+ case 2: return AU1500_PCI_INTB;
+ default: return 0xff;
+ }
+ }
+ if (slot == 13) {
+ switch (pin) {
+ case 1: return AU1500_PCI_INTA;
+ case 2: return AU1500_PCI_INTB;
+ case 3: return AU1500_PCI_INTC;
+ case 4: return AU1500_PCI_INTD;
+ }
+ }
+ return -1;
+}
+#endif
+
+#ifdef CONFIG_MIPS_MIRAGE
+static int db1xxx_map_pci_irq(const struct pci_dev *d, u8 slot, u8 pin)
+{
+ if ((slot < 11) || (slot > 13) || pin == 0)
+ return -1;
+ if (slot == 11)
+ return (pin == 1) ? AU1500_PCI_INTD : 0xff;
+ if (slot == 12)
+ return (pin == 3) ? AU1500_PCI_INTC : 0xff;
+ if (slot == 13) {
+ switch (pin) {
+ case 1: return AU1500_PCI_INTA;
+ case 2: return AU1500_PCI_INTB;
+ default: return 0xff;
+ }
+ }
+ return -1;
+}
+#endif
+
+static struct resource alchemy_pci_host_res[] = {
+ [0] = {
+ .start = AU1500_PCI_PHYS_ADDR,
+ .end = AU1500_PCI_PHYS_ADDR + 0xfff,
+ .flags = IORESOURCE_MEM,
+ },
+};
+
+static struct alchemy_pci_platdata db1xxx_pci_pd = {
+ .board_map_irq = db1xxx_map_pci_irq,
+};
+
+static struct platform_device db1xxx_pci_host_dev = {
+ .dev.platform_data = &db1xxx_pci_pd,
+ .name = "alchemy-pci",
+ .id = 0,
+ .num_resources = ARRAY_SIZE(alchemy_pci_host_res),
+ .resource = alchemy_pci_host_res,
+};
+
+static int __init db15x0_pci_init(void)
+{
+ return platform_device_register(&db1xxx_pci_host_dev);
+}
+/* must be arch_initcall; MIPS PCI scans busses in a subsys_initcall */
+arch_initcall(db15x0_pci_init);
+#endif
+
+#ifdef CONFIG_MIPS_DB1100
+static struct resource au1100_lcd_resources[] = {
+ [0] = {
+ .start = AU1100_LCD_PHYS_ADDR,
+ .end = AU1100_LCD_PHYS_ADDR + 0x800 - 1,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = AU1100_LCD_INT,
+ .end = AU1100_LCD_INT,
+ .flags = IORESOURCE_IRQ,
+ }
+};
+
+static u64 au1100_lcd_dmamask = DMA_BIT_MASK(32);
+
+static struct platform_device au1100_lcd_device = {
+ .name = "au1100-lcd",
+ .id = 0,
+ .dev = {
+ .dma_mask = &au1100_lcd_dmamask,
+ .coherent_dma_mask = DMA_BIT_MASK(32),
+ },
+ .num_resources = ARRAY_SIZE(au1100_lcd_resources),
+ .resource = au1100_lcd_resources,
+};
+#endif
+
static struct resource alchemy_ac97c_res[] = {
[0] = {
.start = AU1000_AC97_PHYS_ADDR,
@@ -130,29 +281,28 @@ static struct platform_device db1x00_audio_dev = {
static int __init db1xxx_dev_init(void)
{
#ifdef DB1XXX_HAS_PCMCIA
- db1x_register_pcmcia_socket(PCMCIA_ATTR_PHYS_ADDR,
- PCMCIA_ATTR_PHYS_ADDR + 0x000400000 - 1,
- PCMCIA_MEM_PHYS_ADDR,
- PCMCIA_MEM_PHYS_ADDR + 0x000400000 - 1,
- PCMCIA_IO_PHYS_ADDR,
- PCMCIA_IO_PHYS_ADDR + 0x000010000 - 1,
- DB1XXX_PCMCIA_CARD0,
- DB1XXX_PCMCIA_CD0,
- /*DB1XXX_PCMCIA_STSCHG0*/0,
- 0,
- 0);
-
- db1x_register_pcmcia_socket(PCMCIA_ATTR_PHYS_ADDR + 0x004000000,
- PCMCIA_ATTR_PHYS_ADDR + 0x004400000 - 1,
- PCMCIA_MEM_PHYS_ADDR + 0x004000000,
- PCMCIA_MEM_PHYS_ADDR + 0x004400000 - 1,
- PCMCIA_IO_PHYS_ADDR + 0x004000000,
- PCMCIA_IO_PHYS_ADDR + 0x004010000 - 1,
- DB1XXX_PCMCIA_CARD1,
- DB1XXX_PCMCIA_CD1,
- /*DB1XXX_PCMCIA_STSCHG1*/0,
- 0,
- 1);
+ db1x_register_pcmcia_socket(
+ AU1000_PCMCIA_ATTR_PHYS_ADDR,
+ AU1000_PCMCIA_ATTR_PHYS_ADDR + 0x000400000 - 1,
+ AU1000_PCMCIA_MEM_PHYS_ADDR,
+ AU1000_PCMCIA_MEM_PHYS_ADDR + 0x000400000 - 1,
+ AU1000_PCMCIA_IO_PHYS_ADDR,
+ AU1000_PCMCIA_IO_PHYS_ADDR + 0x000010000 - 1,
+ DB1XXX_PCMCIA_CARD0, DB1XXX_PCMCIA_CD0,
+ /*DB1XXX_PCMCIA_STSCHG0*/0, 0, 0);
+
+ db1x_register_pcmcia_socket(
+ AU1000_PCMCIA_ATTR_PHYS_ADDR + 0x004000000,
+ AU1000_PCMCIA_ATTR_PHYS_ADDR + 0x004400000 - 1,
+ AU1000_PCMCIA_MEM_PHYS_ADDR + 0x004000000,
+ AU1000_PCMCIA_MEM_PHYS_ADDR + 0x004400000 - 1,
+ AU1000_PCMCIA_IO_PHYS_ADDR + 0x004000000,
+ AU1000_PCMCIA_IO_PHYS_ADDR + 0x004010000 - 1,
+ DB1XXX_PCMCIA_CARD1, DB1XXX_PCMCIA_CD1,
+ /*DB1XXX_PCMCIA_STSCHG1*/0, 0, 1);
+#endif
+#ifdef CONFIG_MIPS_DB1100
+ platform_device_register(&au1100_lcd_device);
#endif
db1x_register_norflash(BOARD_FLASH_SIZE, BOARD_FLASH_WIDTH, F_SWAPPED);
diff --git a/arch/mips/alchemy/devboards/pb1100/platform.c b/arch/mips/alchemy/devboards/pb1100/platform.c
index 2c8dc29..9c57c01 100644
--- a/arch/mips/alchemy/devboards/pb1100/platform.c
+++ b/arch/mips/alchemy/devboards/pb1100/platform.c
@@ -19,31 +19,58 @@
*/
#include <linux/init.h>
+#include <linux/dma-mapping.h>
+#include <linux/platform_device.h>
#include <asm/mach-au1x00/au1000.h>
#include <asm/mach-db1x00/bcsr.h>
#include "../platform.h"
+static struct resource au1100_lcd_resources[] = {
+ [0] = {
+ .start = AU1100_LCD_PHYS_ADDR,
+ .end = AU1100_LCD_PHYS_ADDR + 0x800 - 1,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = AU1100_LCD_INT,
+ .end = AU1100_LCD_INT,
+ .flags = IORESOURCE_IRQ,
+ }
+};
+
+static u64 au1100_lcd_dmamask = DMA_BIT_MASK(32);
+
+static struct platform_device au1100_lcd_device = {
+ .name = "au1100-lcd",
+ .id = 0,
+ .dev = {
+ .dma_mask = &au1100_lcd_dmamask,
+ .coherent_dma_mask = DMA_BIT_MASK(32),
+ },
+ .num_resources = ARRAY_SIZE(au1100_lcd_resources),
+ .resource = au1100_lcd_resources,
+};
+
static int __init pb1100_dev_init(void)
{
int swapped;
/* PCMCIA. single socket, identical to Pb1500 */
- db1x_register_pcmcia_socket(PCMCIA_ATTR_PHYS_ADDR,
- PCMCIA_ATTR_PHYS_ADDR + 0x000400000 - 1,
- PCMCIA_MEM_PHYS_ADDR,
- PCMCIA_MEM_PHYS_ADDR + 0x000400000 - 1,
- PCMCIA_IO_PHYS_ADDR,
- PCMCIA_IO_PHYS_ADDR + 0x000010000 - 1,
- AU1100_GPIO11_INT, /* card */
- AU1100_GPIO9_INT, /* insert */
- /*AU1100_GPIO10_INT*/0, /* stschg */
- 0, /* eject */
- 0); /* id */
+ db1x_register_pcmcia_socket(
+ AU1000_PCMCIA_ATTR_PHYS_ADDR,
+ AU1000_PCMCIA_ATTR_PHYS_ADDR + 0x000400000 - 1,
+ AU1000_PCMCIA_MEM_PHYS_ADDR,
+ AU1000_PCMCIA_MEM_PHYS_ADDR + 0x000400000 - 1,
+ AU1000_PCMCIA_IO_PHYS_ADDR,
+ AU1000_PCMCIA_IO_PHYS_ADDR + 0x000010000 - 1,
+ AU1100_GPIO11_INT, AU1100_GPIO9_INT, /* card / insert */
+ /*AU1100_GPIO10_INT*/0, 0, 0); /* stschg / eject / id */
swapped = bcsr_read(BCSR_STATUS) & BCSR_STATUS_DB1000_SWAPBOOT;
db1x_register_norflash(64 * 1024 * 1024, 4, swapped);
+ platform_device_register(&au1100_lcd_device);
return 0;
}
diff --git a/arch/mips/alchemy/devboards/pb1200/platform.c b/arch/mips/alchemy/devboards/pb1200/platform.c
index 3ef2dce..54f7f7b 100644
--- a/arch/mips/alchemy/devboards/pb1200/platform.c
+++ b/arch/mips/alchemy/devboards/pb1200/platform.c
@@ -24,9 +24,11 @@
#include <linux/platform_device.h>
#include <linux/smc91x.h>
-#include <asm/mach-au1x00/au1xxx.h>
+#include <asm/mach-au1x00/au1000.h>
#include <asm/mach-au1x00/au1100_mmc.h>
+#include <asm/mach-au1x00/au1xxx_dbdma.h>
#include <asm/mach-db1x00/bcsr.h>
+#include <asm/mach-pb1x00/pb1200.h>
#include "../platform.h"
@@ -88,7 +90,7 @@ static int pb1200mmc1_card_inserted(void *mmc_host)
return (bcsr_read(BCSR_SIGSTAT) & BCSR_INT_SD1INSERT) ? 1 : 0;
}
-const struct au1xmmc_platform_data au1xmmc_platdata[2] = {
+static struct au1xmmc_platform_data pb1200mmc_platdata[2] = {
[0] = {
.set_power = pb1200mmc0_set_power,
.card_inserted = pb1200mmc0_card_inserted,
@@ -105,6 +107,79 @@ const struct au1xmmc_platform_data au1xmmc_platdata[2] = {
},
};
+static u64 au1xxx_mmc_dmamask = DMA_BIT_MASK(32);
+
+static struct resource au1200_mmc0_res[] = {
+ [0] = {
+ .start = AU1100_SD0_PHYS_ADDR,
+ .end = AU1100_SD0_PHYS_ADDR + 0xfff,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = AU1200_SD_INT,
+ .end = AU1200_SD_INT,
+ .flags = IORESOURCE_IRQ,
+ },
+ [2] = {
+ .start = AU1200_DSCR_CMD0_SDMS_TX0,
+ .end = AU1200_DSCR_CMD0_SDMS_TX0,
+ .flags = IORESOURCE_DMA,
+ },
+ [3] = {
+ .start = AU1200_DSCR_CMD0_SDMS_RX0,
+ .end = AU1200_DSCR_CMD0_SDMS_RX0,
+ .flags = IORESOURCE_DMA,
+ }
+};
+
+static struct platform_device pb1200_mmc0_dev = {
+ .name = "au1xxx-mmc",
+ .id = 0,
+ .dev = {
+ .dma_mask = &au1xxx_mmc_dmamask,
+ .coherent_dma_mask = DMA_BIT_MASK(32),
+ .platform_data = &pb1200mmc_platdata[0],
+ },
+ .num_resources = ARRAY_SIZE(au1200_mmc0_res),
+ .resource = au1200_mmc0_res,
+};
+
+static struct resource au1200_mmc1_res[] = {
+ [0] = {
+ .start = AU1100_SD1_PHYS_ADDR,
+ .end = AU1100_SD1_PHYS_ADDR + 0xfff,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = AU1200_SD_INT,
+ .end = AU1200_SD_INT,
+ .flags = IORESOURCE_IRQ,
+ },
+ [2] = {
+ .start = AU1200_DSCR_CMD0_SDMS_TX1,
+ .end = AU1200_DSCR_CMD0_SDMS_TX1,
+ .flags = IORESOURCE_DMA,
+ },
+ [3] = {
+ .start = AU1200_DSCR_CMD0_SDMS_RX1,
+ .end = AU1200_DSCR_CMD0_SDMS_RX1,
+ .flags = IORESOURCE_DMA,
+ }
+};
+
+static struct platform_device pb1200_mmc1_dev = {
+ .name = "au1xxx-mmc",
+ .id = 1,
+ .dev = {
+ .dma_mask = &au1xxx_mmc_dmamask,
+ .coherent_dma_mask = DMA_BIT_MASK(32),
+ .platform_data = &pb1200mmc_platdata[1],
+ },
+ .num_resources = ARRAY_SIZE(au1200_mmc1_res),
+ .resource = au1200_mmc1_res,
+};
+
+
static struct resource ide_resources[] = {
[0] = {
.start = IDE_PHYS_ADDR,
@@ -115,7 +190,12 @@ static struct resource ide_resources[] = {
.start = IDE_INT,
.end = IDE_INT,
.flags = IORESOURCE_IRQ
- }
+ },
+ [2] = {
+ .start = AU1200_DSCR_CMD0_DMA_REQ1,
+ .end = AU1200_DSCR_CMD0_DMA_REQ1,
+ .flags = IORESOURCE_DMA,
+ },
};
static u64 ide_dmamask = DMA_BIT_MASK(32);
@@ -161,38 +241,94 @@ static struct platform_device smc91c111_device = {
.resource = smc91c111_resources
};
+static struct resource au1200_psc0_res[] = {
+ [0] = {
+ .start = AU1550_PSC0_PHYS_ADDR,
+ .end = AU1550_PSC0_PHYS_ADDR + 0xfff,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = AU1200_PSC0_INT,
+ .end = AU1200_PSC0_INT,
+ .flags = IORESOURCE_IRQ,
+ },
+ [2] = {
+ .start = AU1200_DSCR_CMD0_PSC0_TX,
+ .end = AU1200_DSCR_CMD0_PSC0_TX,
+ .flags = IORESOURCE_DMA,
+ },
+ [3] = {
+ .start = AU1200_DSCR_CMD0_PSC0_RX,
+ .end = AU1200_DSCR_CMD0_PSC0_RX,
+ .flags = IORESOURCE_DMA,
+ },
+};
+
+static struct platform_device pb1200_i2c_dev = {
+ .name = "au1xpsc_smbus",
+ .id = 0, /* bus number */
+ .num_resources = ARRAY_SIZE(au1200_psc0_res),
+ .resource = au1200_psc0_res,
+};
+
+static struct resource au1200_lcd_res[] = {
+ [0] = {
+ .start = AU1200_LCD_PHYS_ADDR,
+ .end = AU1200_LCD_PHYS_ADDR + 0x800 - 1,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = AU1200_LCD_INT,
+ .end = AU1200_LCD_INT,
+ .flags = IORESOURCE_IRQ,
+ }
+};
+
+static u64 au1200_lcd_dmamask = DMA_BIT_MASK(32);
+
+static struct platform_device au1200_lcd_dev = {
+ .name = "au1200-lcd",
+ .id = 0,
+ .dev = {
+ .dma_mask = &au1200_lcd_dmamask,
+ .coherent_dma_mask = DMA_BIT_MASK(32),
+ },
+ .num_resources = ARRAY_SIZE(au1200_lcd_res),
+ .resource = au1200_lcd_res,
+};
+
static struct platform_device *board_platform_devices[] __initdata = {
&ide_device,
- &smc91c111_device
+ &smc91c111_device,
+ &pb1200_i2c_dev,
+ &pb1200_mmc0_dev,
+ &pb1200_mmc1_dev,
+ &au1200_lcd_dev,
};
static int __init board_register_devices(void)
{
int swapped;
- db1x_register_pcmcia_socket(PCMCIA_ATTR_PHYS_ADDR,
- PCMCIA_ATTR_PHYS_ADDR + 0x000400000 - 1,
- PCMCIA_MEM_PHYS_ADDR,
- PCMCIA_MEM_PHYS_ADDR + 0x000400000 - 1,
- PCMCIA_IO_PHYS_ADDR,
- PCMCIA_IO_PHYS_ADDR + 0x000010000 - 1,
- PB1200_PC0_INT,
- PB1200_PC0_INSERT_INT,
- /*PB1200_PC0_STSCHG_INT*/0,
- PB1200_PC0_EJECT_INT,
- 0);
-
- db1x_register_pcmcia_socket(PCMCIA_ATTR_PHYS_ADDR + 0x008000000,
- PCMCIA_ATTR_PHYS_ADDR + 0x008400000 - 1,
- PCMCIA_MEM_PHYS_ADDR + 0x008000000,
- PCMCIA_MEM_PHYS_ADDR + 0x008400000 - 1,
- PCMCIA_IO_PHYS_ADDR + 0x008000000,
- PCMCIA_IO_PHYS_ADDR + 0x008010000 - 1,
- PB1200_PC1_INT,
- PB1200_PC1_INSERT_INT,
- /*PB1200_PC1_STSCHG_INT*/0,
- PB1200_PC1_EJECT_INT,
- 1);
+ db1x_register_pcmcia_socket(
+ AU1000_PCMCIA_ATTR_PHYS_ADDR,
+ AU1000_PCMCIA_ATTR_PHYS_ADDR + 0x000400000 - 1,
+ AU1000_PCMCIA_MEM_PHYS_ADDR,
+ AU1000_PCMCIA_MEM_PHYS_ADDR + 0x000400000 - 1,
+ AU1000_PCMCIA_IO_PHYS_ADDR,
+ AU1000_PCMCIA_IO_PHYS_ADDR + 0x000010000 - 1,
+ PB1200_PC0_INT, PB1200_PC0_INSERT_INT,
+ /*PB1200_PC0_STSCHG_INT*/0, PB1200_PC0_EJECT_INT, 0);
+
+ db1x_register_pcmcia_socket(
+ AU1000_PCMCIA_ATTR_PHYS_ADDR + 0x008000000,
+ AU1000_PCMCIA_ATTR_PHYS_ADDR + 0x008400000 - 1,
+ AU1000_PCMCIA_MEM_PHYS_ADDR + 0x008000000,
+ AU1000_PCMCIA_MEM_PHYS_ADDR + 0x008400000 - 1,
+ AU1000_PCMCIA_IO_PHYS_ADDR + 0x008000000,
+ AU1000_PCMCIA_IO_PHYS_ADDR + 0x008010000 - 1,
+ PB1200_PC1_INT, PB1200_PC1_INSERT_INT,
+ /*PB1200_PC1_STSCHG_INT*/0, PB1200_PC1_EJECT_INT, 1);
swapped = bcsr_read(BCSR_STATUS) & BCSR_STATUS_DB1200_SWAPBOOT;
db1x_register_norflash(128 * 1024 * 1024, 2, swapped);
diff --git a/arch/mips/alchemy/devboards/pb1500/board_setup.c b/arch/mips/alchemy/devboards/pb1500/board_setup.c
index 3b4fa32..37c1883 100644
--- a/arch/mips/alchemy/devboards/pb1500/board_setup.c
+++ b/arch/mips/alchemy/devboards/pb1500/board_setup.c
@@ -33,13 +33,6 @@
#include <prom.h>
-
-char irq_tab_alchemy[][5] __initdata = {
- [12] = { -1, AU1500_PCI_INTA, 0xff, 0xff, 0xff }, /* IDSEL 12 - HPT370 */
- [13] = { -1, AU1500_PCI_INTA, AU1500_PCI_INTB, AU1500_PCI_INTC, AU1500_PCI_INTD }, /* IDSEL 13 - PCI slot */
-};
-
-
const char *get_system_type(void)
{
return "Alchemy Pb1500";
@@ -101,20 +94,18 @@ void __init board_setup(void)
#endif /* defined(CONFIG_USB_OHCI_HCD) || defined(CONFIG_USB_OHCI_HCD_MODULE) */
#ifdef CONFIG_PCI
- /* Setup PCI bus controller */
- au_writel(0, Au1500_PCI_CMEM);
- au_writel(0x00003fff, Au1500_CFG_BASE);
-#if defined(__MIPSEB__)
- au_writel(0xf | (2 << 6) | (1 << 4), Au1500_PCI_CFG);
-#else
- au_writel(0xf, Au1500_PCI_CFG);
-#endif
- au_writel(0xf0000000, Au1500_PCI_MWMASK_DEV);
- au_writel(0, Au1500_PCI_MWBASE_REV_CCL);
- au_writel(0x02a00356, Au1500_PCI_STATCMD);
- au_writel(0x00003c04, Au1500_PCI_HDRTYPE);
- au_writel(0x00000008, Au1500_PCI_MBAR);
- au_sync();
+ {
+ void __iomem *base =
+ (void __iomem *)KSEG1ADDR(AU1500_PCI_PHYS_ADDR);
+ /* Setup PCI bus controller */
+ __raw_writel(0x00003fff, base + PCI_REG_CMEM);
+ __raw_writel(0xf0000000, base + PCI_REG_MWMASK_DEV);
+ __raw_writel(0, base + PCI_REG_MWBASE_REV_CCL);
+ __raw_writel(0x02a00356, base + PCI_REG_STATCMD);
+ __raw_writel(0x00003c04, base + PCI_REG_PARAM);
+ __raw_writel(0x00000008, base + PCI_REG_MBAR);
+ wmb();
+ }
#endif
/* Enable sys bus clock divider when IDLE state or no bus activity. */
diff --git a/arch/mips/alchemy/devboards/pb1500/platform.c b/arch/mips/alchemy/devboards/pb1500/platform.c
index d443bc7..1e52a01 100644
--- a/arch/mips/alchemy/devboards/pb1500/platform.c
+++ b/arch/mips/alchemy/devboards/pb1500/platform.c
@@ -18,32 +18,77 @@
* Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
*/
+#include <linux/dma-mapping.h>
#include <linux/init.h>
+#include <linux/platform_device.h>
#include <asm/mach-au1x00/au1000.h>
#include <asm/mach-db1x00/bcsr.h>
#include "../platform.h"
+static int pb1500_map_pci_irq(const struct pci_dev *d, u8 slot, u8 pin)
+{
+ if ((slot < 12) || (slot > 13) || pin == 0)
+ return -1;
+ if (slot == 12)
+ return (pin == 1) ? AU1500_PCI_INTA : 0xff;
+ if (slot == 13) {
+ switch (pin) {
+ case 1: return AU1500_PCI_INTA;
+ case 2: return AU1500_PCI_INTB;
+ case 3: return AU1500_PCI_INTC;
+ case 4: return AU1500_PCI_INTD;
+ }
+ }
+ return -1;
+}
+
+static struct resource alchemy_pci_host_res[] = {
+ [0] = {
+ .start = AU1500_PCI_PHYS_ADDR,
+ .end = AU1500_PCI_PHYS_ADDR + 0xfff,
+ .flags = IORESOURCE_MEM,
+ },
+};
+
+static struct alchemy_pci_platdata pb1500_pci_pd = {
+ .board_map_irq = pb1500_map_pci_irq,
+ .pci_cfg_set = PCI_CONFIG_AEN | PCI_CONFIG_R2H | PCI_CONFIG_R1H |
+ PCI_CONFIG_CH |
+#if defined(__MIPSEB__)
+ PCI_CONFIG_SIC_HWA_DAT | PCI_CONFIG_SM,
+#else
+ 0,
+#endif
+};
+
+static struct platform_device pb1500_pci_host = {
+ .dev.platform_data = &pb1500_pci_pd,
+ .name = "alchemy-pci",
+ .id = 0,
+ .num_resources = ARRAY_SIZE(alchemy_pci_host_res),
+ .resource = alchemy_pci_host_res,
+};
+
static int __init pb1500_dev_init(void)
{
int swapped;
- /* PCMCIA. single socket, identical to Pb1500 */
- db1x_register_pcmcia_socket(PCMCIA_ATTR_PHYS_ADDR,
- PCMCIA_ATTR_PHYS_ADDR + 0x000400000 - 1,
- PCMCIA_MEM_PHYS_ADDR,
- PCMCIA_MEM_PHYS_ADDR + 0x000400000 - 1,
- PCMCIA_IO_PHYS_ADDR,
- PCMCIA_IO_PHYS_ADDR + 0x000010000 - 1,
- AU1500_GPIO11_INT, /* card */
- AU1500_GPIO9_INT, /* insert */
- /*AU1500_GPIO10_INT*/0, /* stschg */
- 0, /* eject */
- 0); /* id */
+ /* PCMCIA. single socket, identical to Pb1100 */
+ db1x_register_pcmcia_socket(
+ AU1000_PCMCIA_ATTR_PHYS_ADDR,
+ AU1000_PCMCIA_ATTR_PHYS_ADDR + 0x000400000 - 1,
+ AU1000_PCMCIA_MEM_PHYS_ADDR,
+ AU1000_PCMCIA_MEM_PHYS_ADDR + 0x000400000 - 1,
+ AU1000_PCMCIA_IO_PHYS_ADDR,
+ AU1000_PCMCIA_IO_PHYS_ADDR + 0x000010000 - 1,
+ AU1500_GPIO11_INT, AU1500_GPIO9_INT, /* card / insert */
+ /*AU1500_GPIO10_INT*/0, 0, 0); /* stschg / eject / id */
swapped = bcsr_read(BCSR_STATUS) & BCSR_STATUS_DB1000_SWAPBOOT;
db1x_register_norflash(64 * 1024 * 1024, 4, swapped);
+ platform_device_register(&pb1500_pci_host);
return 0;
}
-device_initcall(pb1500_dev_init);
+arch_initcall(pb1500_dev_init);
diff --git a/arch/mips/alchemy/devboards/pb1550/board_setup.c b/arch/mips/alchemy/devboards/pb1550/board_setup.c
index b790213..0f62d1e 100644
--- a/arch/mips/alchemy/devboards/pb1550/board_setup.c
+++ b/arch/mips/alchemy/devboards/pb1550/board_setup.c
@@ -37,12 +37,6 @@
#include <prom.h>
-
-char irq_tab_alchemy[][5] __initdata = {
- [12] = { -1, AU1550_PCI_INTB, AU1550_PCI_INTC, AU1550_PCI_INTD, AU1550_PCI_INTA }, /* IDSEL 12 - PCI slot 2 (left) */
- [13] = { -1, AU1550_PCI_INTA, AU1550_PCI_INTB, AU1550_PCI_INTC, AU1550_PCI_INTD }, /* IDSEL 13 - PCI slot 1 (right) */
-};
-
const char *get_system_type(void)
{
return "Alchemy Pb1550";
diff --git a/arch/mips/alchemy/devboards/pb1550/platform.c b/arch/mips/alchemy/devboards/pb1550/platform.c
index d7150d0..a4604b8 100644
--- a/arch/mips/alchemy/devboards/pb1550/platform.c
+++ b/arch/mips/alchemy/devboards/pb1550/platform.c
@@ -18,14 +18,89 @@
* Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
*/
+#include <linux/dma-mapping.h>
#include <linux/init.h>
-
+#include <linux/platform_device.h>
#include <asm/mach-au1x00/au1000.h>
+#include <asm/mach-au1x00/au1xxx_dbdma.h>
#include <asm/mach-pb1x00/pb1550.h>
#include <asm/mach-db1x00/bcsr.h>
#include "../platform.h"
+static int pb1550_map_pci_irq(const struct pci_dev *d, u8 slot, u8 pin)
+{
+ if ((slot < 12) || (slot > 13) || pin == 0)
+ return -1;
+ if (slot == 12) {
+ switch (pin) {
+ case 1: return AU1500_PCI_INTB;
+ case 2: return AU1500_PCI_INTC;
+ case 3: return AU1500_PCI_INTD;
+ case 4: return AU1500_PCI_INTA;
+ }
+ }
+ if (slot == 13) {
+ switch (pin) {
+ case 1: return AU1500_PCI_INTA;
+ case 2: return AU1500_PCI_INTB;
+ case 3: return AU1500_PCI_INTC;
+ case 4: return AU1500_PCI_INTD;
+ }
+ }
+ return -1;
+}
+
+static struct resource alchemy_pci_host_res[] = {
+ [0] = {
+ .start = AU1500_PCI_PHYS_ADDR,
+ .end = AU1500_PCI_PHYS_ADDR + 0xfff,
+ .flags = IORESOURCE_MEM,
+ },
+};
+
+static struct alchemy_pci_platdata pb1550_pci_pd = {
+ .board_map_irq = pb1550_map_pci_irq,
+};
+
+static struct platform_device pb1550_pci_host = {
+ .dev.platform_data = &pb1550_pci_pd,
+ .name = "alchemy-pci",
+ .id = 0,
+ .num_resources = ARRAY_SIZE(alchemy_pci_host_res),
+ .resource = alchemy_pci_host_res,
+};
+
+static struct resource au1550_psc2_res[] = {
+ [0] = {
+ .start = AU1550_PSC2_PHYS_ADDR,
+ .end = AU1550_PSC2_PHYS_ADDR + 0xfff,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = AU1550_PSC2_INT,
+ .end = AU1550_PSC2_INT,
+ .flags = IORESOURCE_IRQ,
+ },
+ [2] = {
+ .start = AU1550_DSCR_CMD0_PSC2_TX,
+ .end = AU1550_DSCR_CMD0_PSC2_TX,
+ .flags = IORESOURCE_DMA,
+ },
+ [3] = {
+ .start = AU1550_DSCR_CMD0_PSC2_RX,
+ .end = AU1550_DSCR_CMD0_PSC2_RX,
+ .flags = IORESOURCE_DMA,
+ },
+};
+
+static struct platform_device pb1550_i2c_dev = {
+ .name = "au1xpsc_smbus",
+ .id = 0, /* bus number */
+ .num_resources = ARRAY_SIZE(au1550_psc2_res),
+ .resource = au1550_psc2_res,
+};
+
static int __init pb1550_dev_init(void)
{
int swapped;
@@ -37,33 +112,29 @@ static int __init pb1550_dev_init(void)
* drivers are used to shared irqs and b) statuschange isn't really use-
* ful anyway.
*/
- db1x_register_pcmcia_socket(PCMCIA_ATTR_PHYS_ADDR,
- PCMCIA_ATTR_PHYS_ADDR + 0x000400000 - 1,
- PCMCIA_MEM_PHYS_ADDR,
- PCMCIA_MEM_PHYS_ADDR + 0x000400000 - 1,
- PCMCIA_IO_PHYS_ADDR,
- PCMCIA_IO_PHYS_ADDR + 0x000010000 - 1,
- AU1550_GPIO201_205_INT,
- AU1550_GPIO0_INT,
- 0,
- 0,
- 0);
+ db1x_register_pcmcia_socket(
+ AU1000_PCMCIA_ATTR_PHYS_ADDR,
+ AU1000_PCMCIA_ATTR_PHYS_ADDR + 0x000400000 - 1,
+ AU1000_PCMCIA_MEM_PHYS_ADDR,
+ AU1000_PCMCIA_MEM_PHYS_ADDR + 0x000400000 - 1,
+ AU1000_PCMCIA_IO_PHYS_ADDR,
+ AU1000_PCMCIA_IO_PHYS_ADDR + 0x000010000 - 1,
+ AU1550_GPIO201_205_INT, AU1550_GPIO0_INT, 0, 0, 0);
- db1x_register_pcmcia_socket(PCMCIA_ATTR_PHYS_ADDR + 0x008000000,
- PCMCIA_ATTR_PHYS_ADDR + 0x008400000 - 1,
- PCMCIA_MEM_PHYS_ADDR + 0x008000000,
- PCMCIA_MEM_PHYS_ADDR + 0x008400000 - 1,
- PCMCIA_IO_PHYS_ADDR + 0x008000000,
- PCMCIA_IO_PHYS_ADDR + 0x008010000 - 1,
- AU1550_GPIO201_205_INT,
- AU1550_GPIO1_INT,
- 0,
- 0,
- 1);
+ db1x_register_pcmcia_socket(
+ AU1000_PCMCIA_ATTR_PHYS_ADDR + 0x008000000,
+ AU1000_PCMCIA_ATTR_PHYS_ADDR + 0x008400000 - 1,
+ AU1000_PCMCIA_MEM_PHYS_ADDR + 0x008000000,
+ AU1000_PCMCIA_MEM_PHYS_ADDR + 0x008400000 - 1,
+ AU1000_PCMCIA_IO_PHYS_ADDR + 0x008000000,
+ AU1000_PCMCIA_IO_PHYS_ADDR + 0x008010000 - 1,
+ AU1550_GPIO201_205_INT, AU1550_GPIO1_INT, 0, 0, 1);
swapped = bcsr_read(BCSR_STATUS) & BCSR_STATUS_PB1550_SWAPBOOT;
db1x_register_norflash(128 * 1024 * 1024, 4, swapped);
+ platform_device_register(&pb1550_pci_host);
+ platform_device_register(&pb1550_i2c_dev);
return 0;
}
-device_initcall(pb1550_dev_init);
+arch_initcall(pb1550_dev_init);
diff --git a/arch/mips/alchemy/gpr/board_setup.c b/arch/mips/alchemy/gpr/board_setup.c
index 5f8f069..dea45c7 100644
--- a/arch/mips/alchemy/gpr/board_setup.c
+++ b/arch/mips/alchemy/gpr/board_setup.c
@@ -36,10 +36,6 @@
#include <prom.h>
-char irq_tab_alchemy[][5] __initdata = {
- [0] = { -1, AU1500_PCI_INTA, AU1500_PCI_INTB, 0xff, 0xff },
-};
-
static void gpr_reset(char *c)
{
/* switch System-LED to orange (red# and green# on) */
@@ -76,12 +72,4 @@ void __init board_setup(void)
/* Take away Reset of UMTS-card */
alchemy_gpio_direction_output(215, 1);
-
-#ifdef CONFIG_PCI
-#if defined(__MIPSEB__)
- au_writel(0xf | (2 << 6) | (1 << 4), Au1500_PCI_CFG);
-#else
- au_writel(0xf, Au1500_PCI_CFG);
-#endif
-#endif
}
diff --git a/arch/mips/alchemy/gpr/platform.c b/arch/mips/alchemy/gpr/platform.c
index 14b4662..982ce85 100644
--- a/arch/mips/alchemy/gpr/platform.c
+++ b/arch/mips/alchemy/gpr/platform.c
@@ -167,6 +167,45 @@ static struct i2c_board_info gpr_i2c_info[] __initdata = {
}
};
+
+
+static struct resource alchemy_pci_host_res[] = {
+ [0] = {
+ .start = AU1500_PCI_PHYS_ADDR,
+ .end = AU1500_PCI_PHYS_ADDR + 0xfff,
+ .flags = IORESOURCE_MEM,
+ },
+};
+
+static int gpr_map_pci_irq(const struct pci_dev *d, u8 slot, u8 pin)
+{
+ if ((slot == 0) && (pin == 1))
+ return AU1550_PCI_INTA;
+ else if ((slot == 0) && (pin == 2))
+ return AU1550_PCI_INTB;
+
+ return -1;
+}
+
+static struct alchemy_pci_platdata gpr_pci_pd = {
+ .board_map_irq = gpr_map_pci_irq,
+ .pci_cfg_set = PCI_CONFIG_AEN | PCI_CONFIG_R2H | PCI_CONFIG_R1H |
+ PCI_CONFIG_CH |
+#if defined(__MIPSEB__)
+ PCI_CONFIG_SIC_HWA_DAT | PCI_CONFIG_SM,
+#else
+ 0,
+#endif
+};
+
+static struct platform_device gpr_pci_host_dev = {
+ .dev.platform_data = &gpr_pci_pd,
+ .name = "alchemy-pci",
+ .id = 0,
+ .num_resources = ARRAY_SIZE(alchemy_pci_host_res),
+ .resource = alchemy_pci_host_res,
+};
+
static struct platform_device *gpr_devices[] __initdata = {
&gpr_wdt_device,
&gpr_mtd_device,
@@ -174,6 +213,14 @@ static struct platform_device *gpr_devices[] __initdata = {
&gpr_led_devices,
};
+static int __init gpr_pci_init(void)
+{
+ return platform_device_register(&gpr_pci_host_dev);
+}
+/* must be arch_initcall; MIPS PCI scans busses in a subsys_initcall */
+arch_initcall(gpr_pci_init);
+
+
static int __init gpr_dev_init(void)
{
i2c_register_board_info(0, gpr_i2c_info, ARRAY_SIZE(gpr_i2c_info));
diff --git a/arch/mips/alchemy/mtx-1/board_setup.c b/arch/mips/alchemy/mtx-1/board_setup.c
index 3ae984c..851a5ab 100644
--- a/arch/mips/alchemy/mtx-1/board_setup.c
+++ b/arch/mips/alchemy/mtx-1/board_setup.c
@@ -38,20 +38,6 @@
#include <prom.h>
-char irq_tab_alchemy[][5] __initdata = {
- [0] = { -1, AU1500_PCI_INTA, AU1500_PCI_INTA, 0xff, 0xff }, /* IDSEL 00 - AdapterA-Slot0 (top) */
- [1] = { -1, AU1500_PCI_INTB, AU1500_PCI_INTA, 0xff, 0xff }, /* IDSEL 01 - AdapterA-Slot1 (bottom) */
- [2] = { -1, AU1500_PCI_INTC, AU1500_PCI_INTD, 0xff, 0xff }, /* IDSEL 02 - AdapterB-Slot0 (top) */
- [3] = { -1, AU1500_PCI_INTD, AU1500_PCI_INTC, 0xff, 0xff }, /* IDSEL 03 - AdapterB-Slot1 (bottom) */
- [4] = { -1, AU1500_PCI_INTA, AU1500_PCI_INTB, 0xff, 0xff }, /* IDSEL 04 - AdapterC-Slot0 (top) */
- [5] = { -1, AU1500_PCI_INTB, AU1500_PCI_INTA, 0xff, 0xff }, /* IDSEL 05 - AdapterC-Slot1 (bottom) */
- [6] = { -1, AU1500_PCI_INTC, AU1500_PCI_INTD, 0xff, 0xff }, /* IDSEL 06 - AdapterD-Slot0 (top) */
- [7] = { -1, AU1500_PCI_INTD, AU1500_PCI_INTC, 0xff, 0xff }, /* IDSEL 07 - AdapterD-Slot1 (bottom) */
-};
-
-extern int (*board_pci_idsel)(unsigned int devsel, int assert);
-int mtx1_pci_idsel(unsigned int devsel, int assert);
-
static void mtx1_reset(char *c)
{
/* Jump to the reset vector */
@@ -74,15 +60,6 @@ void __init board_setup(void)
alchemy_gpio_direction_output(204, 0);
#endif /* defined(CONFIG_USB_OHCI_HCD) || defined(CONFIG_USB_OHCI_HCD_MODULE) */
-#ifdef CONFIG_PCI
-#if defined(__MIPSEB__)
- au_writel(0xf | (2 << 6) | (1 << 4), Au1500_PCI_CFG);
-#else
- au_writel(0xf, Au1500_PCI_CFG);
-#endif
- board_pci_idsel = mtx1_pci_idsel;
-#endif
-
/* Initialize sys_pinfunc */
au_writel(SYS_PF_NI2, SYS_PINFUNC);
@@ -104,23 +81,6 @@ void __init board_setup(void)
printk(KERN_INFO "4G Systems MTX-1 Board\n");
}
-int
-mtx1_pci_idsel(unsigned int devsel, int assert)
-{
- /* This function is only necessary to support a proprietary Cardbus
- * adapter on the mtx-1 "singleboard" variant. It triggers a custom
- * logic chip connected to EXT_IO3 (GPIO1) to suppress IDSEL signals.
- */
- if (assert && devsel != 0)
- /* Suppress signal to Cardbus */
- alchemy_gpio_set_value(1, 0); /* set EXT_IO3 OFF */
- else
- alchemy_gpio_set_value(1, 1); /* set EXT_IO3 ON */
-
- udelay(1);
- return 1;
-}
-
static int __init mtx1_init_irq(void)
{
irq_set_irq_type(AU1500_GPIO204_INT, IRQF_TRIGGER_HIGH);
diff --git a/arch/mips/alchemy/mtx-1/platform.c b/arch/mips/alchemy/mtx-1/platform.c
index 55628e3..cc47b68 100644
--- a/arch/mips/alchemy/mtx-1/platform.c
+++ b/arch/mips/alchemy/mtx-1/platform.c
@@ -135,7 +135,69 @@ static struct platform_device mtx1_mtd = {
.resource = &mtx1_mtd_resource,
};
+static struct resource alchemy_pci_host_res[] = {
+ [0] = {
+ .start = AU1500_PCI_PHYS_ADDR,
+ .end = AU1500_PCI_PHYS_ADDR + 0xfff,
+ .flags = IORESOURCE_MEM,
+ },
+};
+
+static int mtx1_pci_idsel(unsigned int devsel, int assert)
+{
+ /* This function is only necessary to support a proprietary Cardbus
+ * adapter on the mtx-1 "singleboard" variant. It triggers a custom
+ * logic chip connected to EXT_IO3 (GPIO1) to suppress IDSEL signals.
+ */
+ if (assert && devsel != 0)
+ /* Suppress signal to Cardbus */
+ alchemy_gpio_set_value(1, 0); /* set EXT_IO3 OFF */
+ else
+ alchemy_gpio_set_value(1, 1); /* set EXT_IO3 ON */
+
+ udelay(1);
+ return 1;
+}
+
+static const char mtx1_irqtab[][5] = {
+ [0] = { -1, AU1500_PCI_INTA, AU1500_PCI_INTA, 0xff, 0xff }, /* IDSEL 00 - AdapterA-Slot0 (top) */
+ [1] = { -1, AU1500_PCI_INTB, AU1500_PCI_INTA, 0xff, 0xff }, /* IDSEL 01 - AdapterA-Slot1 (bottom) */
+ [2] = { -1, AU1500_PCI_INTC, AU1500_PCI_INTD, 0xff, 0xff }, /* IDSEL 02 - AdapterB-Slot0 (top) */
+ [3] = { -1, AU1500_PCI_INTD, AU1500_PCI_INTC, 0xff, 0xff }, /* IDSEL 03 - AdapterB-Slot1 (bottom) */
+ [4] = { -1, AU1500_PCI_INTA, AU1500_PCI_INTB, 0xff, 0xff }, /* IDSEL 04 - AdapterC-Slot0 (top) */
+ [5] = { -1, AU1500_PCI_INTB, AU1500_PCI_INTA, 0xff, 0xff }, /* IDSEL 05 - AdapterC-Slot1 (bottom) */
+ [6] = { -1, AU1500_PCI_INTC, AU1500_PCI_INTD, 0xff, 0xff }, /* IDSEL 06 - AdapterD-Slot0 (top) */
+ [7] = { -1, AU1500_PCI_INTD, AU1500_PCI_INTC, 0xff, 0xff }, /* IDSEL 07 - AdapterD-Slot1 (bottom) */
+};
+
+static int mtx1_map_pci_irq(const struct pci_dev *d, u8 slot, u8 pin)
+{
+ return mtx1_irqtab[slot][pin];
+}
+
+static struct alchemy_pci_platdata mtx1_pci_pd = {
+ .board_map_irq = mtx1_map_pci_irq,
+ .board_pci_idsel = mtx1_pci_idsel,
+ .pci_cfg_set = PCI_CONFIG_AEN | PCI_CONFIG_R2H | PCI_CONFIG_R1H |
+ PCI_CONFIG_CH |
+#if defined(__MIPSEB__)
+ PCI_CONFIG_SIC_HWA_DAT | PCI_CONFIG_SM,
+#else
+ 0,
+#endif
+};
+
+static struct platform_device mtx1_pci_host = {
+ .dev.platform_data = &mtx1_pci_pd,
+ .name = "alchemy-pci",
+ .id = 0,
+ .num_resources = ARRAY_SIZE(alchemy_pci_host_res),
+ .resource = alchemy_pci_host_res,
+};
+
+
static struct __initdata platform_device * mtx1_devs[] = {
+ &mtx1_pci_host,
&mtx1_gpio_leds,
&mtx1_wdt,
&mtx1_button,
diff --git a/arch/mips/alchemy/xxs1500/board_setup.c b/arch/mips/alchemy/xxs1500/board_setup.c
index 81e57fa..3fa83f7 100644
--- a/arch/mips/alchemy/xxs1500/board_setup.c
+++ b/arch/mips/alchemy/xxs1500/board_setup.c
@@ -70,14 +70,6 @@ void __init board_setup(void)
/* Enable DTR (MCR bit 0) = USB power up */
__raw_writel(1, (void __iomem *)KSEG1ADDR(AU1000_UART3_PHYS_ADDR + 0x18));
wmb();
-
-#ifdef CONFIG_PCI
-#if defined(__MIPSEB__)
- au_writel(0xf | (2 << 6) | (1 << 4), Au1500_PCI_CFG);
-#else
- au_writel(0xf, Au1500_PCI_CFG);
-#endif
-#endif
}
static int __init xxs1500_init_irq(void)
diff --git a/arch/mips/alchemy/xxs1500/platform.c b/arch/mips/alchemy/xxs1500/platform.c
index e87c45c..06a3a45 100644
--- a/arch/mips/alchemy/xxs1500/platform.c
+++ b/arch/mips/alchemy/xxs1500/platform.c
@@ -27,20 +27,20 @@ static struct resource xxs1500_pcmcia_res[] = {
{
.name = "pcmcia-io",
.flags = IORESOURCE_MEM,
- .start = PCMCIA_IO_PHYS_ADDR,
- .end = PCMCIA_IO_PHYS_ADDR + 0x000400000 - 1,
+ .start = AU1000_PCMCIA_IO_PHYS_ADDR,
+ .end = AU1000_PCMCIA_IO_PHYS_ADDR + 0x000400000 - 1,
},
{
.name = "pcmcia-attr",
.flags = IORESOURCE_MEM,
- .start = PCMCIA_ATTR_PHYS_ADDR,
- .end = PCMCIA_ATTR_PHYS_ADDR + 0x000400000 - 1,
+ .start = AU1000_PCMCIA_ATTR_PHYS_ADDR,
+ .end = AU1000_PCMCIA_ATTR_PHYS_ADDR + 0x000400000 - 1,
},
{
.name = "pcmcia-mem",
.flags = IORESOURCE_MEM,
- .start = PCMCIA_MEM_PHYS_ADDR,
- .end = PCMCIA_MEM_PHYS_ADDR + 0x000400000 - 1,
+ .start = AU1000_PCMCIA_MEM_PHYS_ADDR,
+ .end = AU1000_PCMCIA_MEM_PHYS_ADDR + 0x000400000 - 1,
},
};
diff --git a/arch/mips/include/asm/cacheflush.h b/arch/mips/include/asm/cacheflush.h
index 40bb9fd..69468de 100644
--- a/arch/mips/include/asm/cacheflush.h
+++ b/arch/mips/include/asm/cacheflush.h
@@ -114,4 +114,28 @@ unsigned long run_uncached(void *func);
extern void *kmap_coherent(struct page *page, unsigned long addr);
extern void kunmap_coherent(void);
+#define ARCH_HAS_FLUSH_KERNEL_DCACHE_PAGE
+static inline void flush_kernel_dcache_page(struct page *page)
+{
+ BUG_ON(cpu_has_dc_aliases && PageHighMem(page));
+}
+
+/*
+ * For now flush_kernel_vmap_range and invalidate_kernel_vmap_range both do a
+ * cache writeback and invalidate operation.
+ */
+extern void (*__flush_kernel_vmap_range)(unsigned long vaddr, int size);
+
+static inline void flush_kernel_vmap_range(void *vaddr, int size)
+{
+ if (cpu_has_dc_aliases)
+ __flush_kernel_vmap_range((unsigned long) vaddr, size);
+}
+
+static inline void invalidate_kernel_vmap_range(void *vaddr, int size)
+{
+ if (cpu_has_dc_aliases)
+ __flush_kernel_vmap_range((unsigned long) vaddr, size);
+}
+
#endif /* _ASM_CACHEFLUSH_H */
diff --git a/arch/mips/include/asm/cpu.h b/arch/mips/include/asm/cpu.h
index 5f95a4b..2f7f418 100644
--- a/arch/mips/include/asm/cpu.h
+++ b/arch/mips/include/asm/cpu.h
@@ -135,6 +135,9 @@
#define PRID_IMP_CAVIUM_CN50XX 0x0600
#define PRID_IMP_CAVIUM_CN52XX 0x0700
#define PRID_IMP_CAVIUM_CN63XX 0x9000
+#define PRID_IMP_CAVIUM_CN68XX 0x9100
+#define PRID_IMP_CAVIUM_CN66XX 0x9200
+#define PRID_IMP_CAVIUM_CN61XX 0x9300
/*
* These are the PRID's for when 23:16 == PRID_COMP_INGENIC
diff --git a/arch/mips/include/asm/io.h b/arch/mips/include/asm/io.h
index b04e4de..a58f229 100644
--- a/arch/mips/include/asm/io.h
+++ b/arch/mips/include/asm/io.h
@@ -329,14 +329,10 @@ static inline void pfx##write##bwlq(type val, \
"dsrl32 %L0, %L0, 0" "\n\t" \
"dsll32 %M0, %M0, 0" "\n\t" \
"or %L0, %L0, %M0" "\n\t" \
- ".set push" "\n\t" \
- ".set noreorder" "\n\t" \
- ".set nomacro" "\n\t" \
"sd %L0, %2" "\n\t" \
- ".set pop" "\n\t" \
".set mips0" "\n" \
: "=r" (__tmp) \
- : "0" (__val), "R" (*__mem)); \
+ : "0" (__val), "m" (*__mem)); \
if (irq) \
local_irq_restore(__flags); \
} else \
@@ -359,16 +355,12 @@ static inline type pfx##read##bwlq(const volatile void __iomem *mem) \
local_irq_save(__flags); \
__asm__ __volatile__( \
".set mips3" "\t\t# __readq" "\n\t" \
- ".set push" "\n\t" \
- ".set noreorder" "\n\t" \
- ".set nomacro" "\n\t" \
"ld %L0, %1" "\n\t" \
- ".set pop" "\n\t" \
"dsra32 %M0, %L0, 0" "\n\t" \
"sll %L0, %L0, 0" "\n\t" \
".set mips0" "\n" \
: "=r" (__val) \
- : "R" (*__mem)); \
+ : "m" (*__mem)); \
if (irq) \
local_irq_restore(__flags); \
} else { \
diff --git a/arch/mips/include/asm/mach-au1x00/au1000.h b/arch/mips/include/asm/mach-au1x00/au1000.h
index f260ebe..de24ec57 100644
--- a/arch/mips/include/asm/mach-au1x00/au1000.h
+++ b/arch/mips/include/asm/mach-au1x00/au1000.h
@@ -245,6 +245,23 @@ void alchemy_sleep_au1000(void);
void alchemy_sleep_au1550(void);
void au_sleep(void);
+/* USB: drivers/usb/host/alchemy-common.c */
+enum alchemy_usb_block {
+ ALCHEMY_USB_OHCI0,
+ ALCHEMY_USB_UDC0,
+ ALCHEMY_USB_EHCI0,
+ ALCHEMY_USB_OTG0,
+};
+int alchemy_usb_control(int block, int enable);
+
+/* PCI controller platform data */
+struct alchemy_pci_platdata {
+ int (*board_map_irq)(const struct pci_dev *d, u8 slot, u8 pin);
+ int (*board_pci_idsel)(unsigned int devsel, int assert);
+ /* bits to set/clear in PCI_CONFIG register */
+ unsigned long pci_cfg_set;
+ unsigned long pci_cfg_clr;
+};
/* SOC Interrupt numbers */
@@ -575,38 +592,95 @@ enum soc_au1200_ints {
#endif /* !defined (_LANGUAGE_ASSEMBLY) */
/*
- * SDRAM register offsets
+ * Physical base addresses for integrated peripherals
+ * 0..au1000 1..au1500 2..au1100 3..au1550 4..au1200
*/
-#if defined(CONFIG_SOC_AU1000) || defined(CONFIG_SOC_AU1500) || \
- defined(CONFIG_SOC_AU1100)
-#define MEM_SDMODE0 0x0000
-#define MEM_SDMODE1 0x0004
-#define MEM_SDMODE2 0x0008
-#define MEM_SDADDR0 0x000C
-#define MEM_SDADDR1 0x0010
-#define MEM_SDADDR2 0x0014
-#define MEM_SDREFCFG 0x0018
-#define MEM_SDPRECMD 0x001C
-#define MEM_SDAUTOREF 0x0020
-#define MEM_SDWRMD0 0x0024
-#define MEM_SDWRMD1 0x0028
-#define MEM_SDWRMD2 0x002C
-#define MEM_SDSLEEP 0x0030
-#define MEM_SDSMCKE 0x0034
-/*
- * MEM_SDMODE register content definitions
- */
+#define AU1000_AC97_PHYS_ADDR 0x10000000 /* 012 */
+#define AU1000_USB_OHCI_PHYS_ADDR 0x10100000 /* 012 */
+#define AU1000_USB_UDC_PHYS_ADDR 0x10200000 /* 0123 */
+#define AU1000_IRDA_PHYS_ADDR 0x10300000 /* 02 */
+#define AU1200_AES_PHYS_ADDR 0x10300000 /* 4 */
+#define AU1000_IC0_PHYS_ADDR 0x10400000 /* 01234 */
+#define AU1000_MAC0_PHYS_ADDR 0x10500000 /* 023 */
+#define AU1000_MAC1_PHYS_ADDR 0x10510000 /* 023 */
+#define AU1000_MACEN_PHYS_ADDR 0x10520000 /* 023 */
+#define AU1100_SD0_PHYS_ADDR 0x10600000 /* 24 */
+#define AU1100_SD1_PHYS_ADDR 0x10680000 /* 24 */
+#define AU1550_PSC2_PHYS_ADDR 0x10A00000 /* 3 */
+#define AU1550_PSC3_PHYS_ADDR 0x10B00000 /* 3 */
+#define AU1000_I2S_PHYS_ADDR 0x11000000 /* 02 */
+#define AU1500_MAC0_PHYS_ADDR 0x11500000 /* 1 */
+#define AU1500_MAC1_PHYS_ADDR 0x11510000 /* 1 */
+#define AU1500_MACEN_PHYS_ADDR 0x11520000 /* 1 */
+#define AU1000_UART0_PHYS_ADDR 0x11100000 /* 01234 */
+#define AU1200_SWCNT_PHYS_ADDR 0x1110010C /* 4 */
+#define AU1000_UART1_PHYS_ADDR 0x11200000 /* 0234 */
+#define AU1000_UART2_PHYS_ADDR 0x11300000 /* 0 */
+#define AU1000_UART3_PHYS_ADDR 0x11400000 /* 0123 */
+#define AU1000_SSI0_PHYS_ADDR 0x11600000 /* 02 */
+#define AU1000_SSI1_PHYS_ADDR 0x11680000 /* 02 */
+#define AU1500_GPIO2_PHYS_ADDR 0x11700000 /* 1234 */
+#define AU1000_IC1_PHYS_ADDR 0x11800000 /* 01234 */
+#define AU1000_SYS_PHYS_ADDR 0x11900000 /* 01234 */
+#define AU1550_PSC0_PHYS_ADDR 0x11A00000 /* 34 */
+#define AU1550_PSC1_PHYS_ADDR 0x11B00000 /* 34 */
+#define AU1000_MEM_PHYS_ADDR 0x14000000 /* 01234 */
+#define AU1000_STATIC_MEM_PHYS_ADDR 0x14001000 /* 01234 */
+#define AU1000_DMA_PHYS_ADDR 0x14002000 /* 012 */
+#define AU1550_DBDMA_PHYS_ADDR 0x14002000 /* 34 */
+#define AU1550_DBDMA_CONF_PHYS_ADDR 0x14003000 /* 34 */
+#define AU1000_MACDMA0_PHYS_ADDR 0x14004000 /* 0123 */
+#define AU1000_MACDMA1_PHYS_ADDR 0x14004200 /* 0123 */
+#define AU1200_CIM_PHYS_ADDR 0x14004000 /* 4 */
+#define AU1500_PCI_PHYS_ADDR 0x14005000 /* 13 */
+#define AU1550_PE_PHYS_ADDR 0x14008000 /* 3 */
+#define AU1200_MAEBE_PHYS_ADDR 0x14010000 /* 4 */
+#define AU1200_MAEFE_PHYS_ADDR 0x14012000 /* 4 */
+#define AU1550_USB_OHCI_PHYS_ADDR 0x14020000 /* 3 */
+#define AU1200_USB_CTL_PHYS_ADDR 0x14020000 /* 4 */
+#define AU1200_USB_OTG_PHYS_ADDR 0x14020020 /* 4 */
+#define AU1200_USB_OHCI_PHYS_ADDR 0x14020100 /* 4 */
+#define AU1200_USB_EHCI_PHYS_ADDR 0x14020200 /* 4 */
+#define AU1200_USB_UDC_PHYS_ADDR 0x14022000 /* 4 */
+#define AU1100_LCD_PHYS_ADDR 0x15000000 /* 2 */
+#define AU1200_LCD_PHYS_ADDR 0x15000000 /* 4 */
+#define AU1500_PCI_MEM_PHYS_ADDR 0x400000000ULL /* 13 */
+#define AU1500_PCI_IO_PHYS_ADDR 0x500000000ULL /* 13 */
+#define AU1500_PCI_CONFIG0_PHYS_ADDR 0x600000000ULL /* 13 */
+#define AU1500_PCI_CONFIG1_PHYS_ADDR 0x680000000ULL /* 13 */
+#define AU1000_PCMCIA_IO_PHYS_ADDR 0xF00000000ULL /* 01234 */
+#define AU1000_PCMCIA_ATTR_PHYS_ADDR 0xF40000000ULL /* 01234 */
+#define AU1000_PCMCIA_MEM_PHYS_ADDR 0xF80000000ULL /* 01234 */
+
+
+/* Au1000 SDRAM memory controller register offsets */
+#define AU1000_MEM_SDMODE0 0x0000
+#define AU1000_MEM_SDMODE1 0x0004
+#define AU1000_MEM_SDMODE2 0x0008
+#define AU1000_MEM_SDADDR0 0x000C
+#define AU1000_MEM_SDADDR1 0x0010
+#define AU1000_MEM_SDADDR2 0x0014
+#define AU1000_MEM_SDREFCFG 0x0018
+#define AU1000_MEM_SDPRECMD 0x001C
+#define AU1000_MEM_SDAUTOREF 0x0020
+#define AU1000_MEM_SDWRMD0 0x0024
+#define AU1000_MEM_SDWRMD1 0x0028
+#define AU1000_MEM_SDWRMD2 0x002C
+#define AU1000_MEM_SDSLEEP 0x0030
+#define AU1000_MEM_SDSMCKE 0x0034
+
+/* MEM_SDMODE register content definitions */
#define MEM_SDMODE_F (1 << 22)
#define MEM_SDMODE_SR (1 << 21)
#define MEM_SDMODE_BS (1 << 20)
#define MEM_SDMODE_RS (3 << 18)
#define MEM_SDMODE_CS (7 << 15)
-#define MEM_SDMODE_TRAS (15 << 11)
-#define MEM_SDMODE_TMRD (3 << 9)
+#define MEM_SDMODE_TRAS (15 << 11)
+#define MEM_SDMODE_TMRD (3 << 9)
#define MEM_SDMODE_TWR (3 << 7)
#define MEM_SDMODE_TRP (3 << 5)
-#define MEM_SDMODE_TRCD (3 << 3)
+#define MEM_SDMODE_TRCD (3 << 3)
#define MEM_SDMODE_TCL (7 << 0)
#define MEM_SDMODE_BS_2Bank (0 << 20)
@@ -628,173 +702,43 @@ enum soc_au1200_ints {
#define MEM_SDMODE_TRCD_N(N) ((N) << 3)
#define MEM_SDMODE_TCL_N(N) ((N) << 0)
-/*
- * MEM_SDADDR register contents definitions
- */
+/* MEM_SDADDR register contents definitions */
#define MEM_SDADDR_E (1 << 20)
-#define MEM_SDADDR_CSBA (0x03FF << 10)
+#define MEM_SDADDR_CSBA (0x03FF << 10)
#define MEM_SDADDR_CSMASK (0x03FF << 0)
#define MEM_SDADDR_CSBA_N(N) ((N) & (0x03FF << 22) >> 12)
#define MEM_SDADDR_CSMASK_N(N) ((N)&(0x03FF << 22) >> 22)
-/*
- * MEM_SDREFCFG register content definitions
- */
+/* MEM_SDREFCFG register content definitions */
#define MEM_SDREFCFG_TRC (15 << 28)
#define MEM_SDREFCFG_TRPM (3 << 26)
#define MEM_SDREFCFG_E (1 << 25)
-#define MEM_SDREFCFG_RE (0x1ffffff << 0)
+#define MEM_SDREFCFG_RE (0x1ffffff << 0)
#define MEM_SDREFCFG_TRC_N(N) ((N) << MEM_SDREFCFG_TRC)
#define MEM_SDREFCFG_TRPM_N(N) ((N) << MEM_SDREFCFG_TRPM)
#define MEM_SDREFCFG_REF_N(N) (N)
-#endif
-
-/***********************************************************************/
-/*
- * Au1550 SDRAM Register Offsets
- */
-
-/***********************************************************************/
-
-#if defined(CONFIG_SOC_AU1550) || defined(CONFIG_SOC_AU1200)
-#define MEM_SDMODE0 0x0800
-#define MEM_SDMODE1 0x0808
-#define MEM_SDMODE2 0x0810
-#define MEM_SDADDR0 0x0820
-#define MEM_SDADDR1 0x0828
-#define MEM_SDADDR2 0x0830
-#define MEM_SDCONFIGA 0x0840
-#define MEM_SDCONFIGB 0x0848
-#define MEM_SDSTAT 0x0850
-#define MEM_SDERRADDR 0x0858
-#define MEM_SDSTRIDE0 0x0860
-#define MEM_SDSTRIDE1 0x0868
-#define MEM_SDSTRIDE2 0x0870
-#define MEM_SDWRMD0 0x0880
-#define MEM_SDWRMD1 0x0888
-#define MEM_SDWRMD2 0x0890
-#define MEM_SDPRECMD 0x08C0
-#define MEM_SDAUTOREF 0x08C8
-#define MEM_SDSREF 0x08D0
-#define MEM_SDSLEEP MEM_SDSREF
-
-#endif
-
-/*
- * Physical base addresses for integrated peripherals
- * 0..au1000 1..au1500 2..au1100 3..au1550 4..au1200
- */
-
-#define AU1000_AC97_PHYS_ADDR 0x10000000 /* 012 */
-#define AU1000_USBD_PHYS_ADDR 0x10200000 /* 0123 */
-#define AU1000_IC0_PHYS_ADDR 0x10400000 /* 01234 */
-#define AU1000_MAC0_PHYS_ADDR 0x10500000 /* 023 */
-#define AU1000_MAC1_PHYS_ADDR 0x10510000 /* 023 */
-#define AU1000_MACEN_PHYS_ADDR 0x10520000 /* 023 */
-#define AU1100_SD0_PHYS_ADDR 0x10600000 /* 24 */
-#define AU1100_SD1_PHYS_ADDR 0x10680000 /* 24 */
-#define AU1000_I2S_PHYS_ADDR 0x11000000 /* 02 */
-#define AU1500_MAC0_PHYS_ADDR 0x11500000 /* 1 */
-#define AU1500_MAC1_PHYS_ADDR 0x11510000 /* 1 */
-#define AU1500_MACEN_PHYS_ADDR 0x11520000 /* 1 */
-#define AU1000_UART0_PHYS_ADDR 0x11100000 /* 01234 */
-#define AU1000_UART1_PHYS_ADDR 0x11200000 /* 0234 */
-#define AU1000_UART2_PHYS_ADDR 0x11300000 /* 0 */
-#define AU1000_UART3_PHYS_ADDR 0x11400000 /* 0123 */
-#define AU1500_GPIO2_PHYS_ADDR 0x11700000 /* 1234 */
-#define AU1000_IC1_PHYS_ADDR 0x11800000 /* 01234 */
-#define AU1000_SYS_PHYS_ADDR 0x11900000 /* 01234 */
-#define AU1000_DMA_PHYS_ADDR 0x14002000 /* 012 */
-#define AU1550_DBDMA_PHYS_ADDR 0x14002000 /* 34 */
-#define AU1550_DBDMA_CONF_PHYS_ADDR 0x14003000 /* 34 */
-#define AU1000_MACDMA0_PHYS_ADDR 0x14004000 /* 0123 */
-#define AU1000_MACDMA1_PHYS_ADDR 0x14004200 /* 0123 */
-
-
-#ifdef CONFIG_SOC_AU1000
-#define MEM_PHYS_ADDR 0x14000000
-#define STATIC_MEM_PHYS_ADDR 0x14001000
-#define USBH_PHYS_ADDR 0x10100000
-#define IRDA_PHYS_ADDR 0x10300000
-#define SSI0_PHYS_ADDR 0x11600000
-#define SSI1_PHYS_ADDR 0x11680000
-#define PCMCIA_IO_PHYS_ADDR 0xF00000000ULL
-#define PCMCIA_ATTR_PHYS_ADDR 0xF40000000ULL
-#define PCMCIA_MEM_PHYS_ADDR 0xF80000000ULL
-#endif
-
-/********************************************************************/
-
-#ifdef CONFIG_SOC_AU1500
-#define MEM_PHYS_ADDR 0x14000000
-#define STATIC_MEM_PHYS_ADDR 0x14001000
-#define USBH_PHYS_ADDR 0x10100000
-#define PCI_PHYS_ADDR 0x14005000
-#define PCI_MEM_PHYS_ADDR 0x400000000ULL
-#define PCI_IO_PHYS_ADDR 0x500000000ULL
-#define PCI_CONFIG0_PHYS_ADDR 0x600000000ULL
-#define PCI_CONFIG1_PHYS_ADDR 0x680000000ULL
-#define PCMCIA_IO_PHYS_ADDR 0xF00000000ULL
-#define PCMCIA_ATTR_PHYS_ADDR 0xF40000000ULL
-#define PCMCIA_MEM_PHYS_ADDR 0xF80000000ULL
-#endif
-
-/********************************************************************/
-
-#ifdef CONFIG_SOC_AU1100
-#define MEM_PHYS_ADDR 0x14000000
-#define STATIC_MEM_PHYS_ADDR 0x14001000
-#define USBH_PHYS_ADDR 0x10100000
-#define IRDA_PHYS_ADDR 0x10300000
-#define SSI0_PHYS_ADDR 0x11600000
-#define SSI1_PHYS_ADDR 0x11680000
-#define LCD_PHYS_ADDR 0x15000000
-#define PCMCIA_IO_PHYS_ADDR 0xF00000000ULL
-#define PCMCIA_ATTR_PHYS_ADDR 0xF40000000ULL
-#define PCMCIA_MEM_PHYS_ADDR 0xF80000000ULL
-#endif
-
-/***********************************************************************/
-
-#ifdef CONFIG_SOC_AU1550
-#define MEM_PHYS_ADDR 0x14000000
-#define STATIC_MEM_PHYS_ADDR 0x14001000
-#define USBH_PHYS_ADDR 0x14020000
-#define PCI_PHYS_ADDR 0x14005000
-#define PE_PHYS_ADDR 0x14008000
-#define PSC0_PHYS_ADDR 0x11A00000
-#define PSC1_PHYS_ADDR 0x11B00000
-#define PSC2_PHYS_ADDR 0x10A00000
-#define PSC3_PHYS_ADDR 0x10B00000
-#define PCI_MEM_PHYS_ADDR 0x400000000ULL
-#define PCI_IO_PHYS_ADDR 0x500000000ULL
-#define PCI_CONFIG0_PHYS_ADDR 0x600000000ULL
-#define PCI_CONFIG1_PHYS_ADDR 0x680000000ULL
-#define PCMCIA_IO_PHYS_ADDR 0xF00000000ULL
-#define PCMCIA_ATTR_PHYS_ADDR 0xF40000000ULL
-#define PCMCIA_MEM_PHYS_ADDR 0xF80000000ULL
-#endif
-
-/***********************************************************************/
-
-#ifdef CONFIG_SOC_AU1200
-#define MEM_PHYS_ADDR 0x14000000
-#define STATIC_MEM_PHYS_ADDR 0x14001000
-#define AES_PHYS_ADDR 0x10300000
-#define CIM_PHYS_ADDR 0x14004000
-#define USBM_PHYS_ADDR 0x14020000
-#define USBH_PHYS_ADDR 0x14020100
-#define PSC0_PHYS_ADDR 0x11A00000
-#define PSC1_PHYS_ADDR 0x11B00000
-#define LCD_PHYS_ADDR 0x15000000
-#define SWCNT_PHYS_ADDR 0x1110010C
-#define MAEFE_PHYS_ADDR 0x14012000
-#define MAEBE_PHYS_ADDR 0x14010000
-#define PCMCIA_IO_PHYS_ADDR 0xF00000000ULL
-#define PCMCIA_ATTR_PHYS_ADDR 0xF40000000ULL
-#define PCMCIA_MEM_PHYS_ADDR 0xF80000000ULL
-#endif
+/* Au1550 SDRAM Register Offsets */
+#define AU1550_MEM_SDMODE0 0x0800
+#define AU1550_MEM_SDMODE1 0x0808
+#define AU1550_MEM_SDMODE2 0x0810
+#define AU1550_MEM_SDADDR0 0x0820
+#define AU1550_MEM_SDADDR1 0x0828
+#define AU1550_MEM_SDADDR2 0x0830
+#define AU1550_MEM_SDCONFIGA 0x0840
+#define AU1550_MEM_SDCONFIGB 0x0848
+#define AU1550_MEM_SDSTAT 0x0850
+#define AU1550_MEM_SDERRADDR 0x0858
+#define AU1550_MEM_SDSTRIDE0 0x0860
+#define AU1550_MEM_SDSTRIDE1 0x0868
+#define AU1550_MEM_SDSTRIDE2 0x0870
+#define AU1550_MEM_SDWRMD0 0x0880
+#define AU1550_MEM_SDWRMD1 0x0888
+#define AU1550_MEM_SDWRMD2 0x0890
+#define AU1550_MEM_SDPRECMD 0x08C0
+#define AU1550_MEM_SDAUTOREF 0x08C8
+#define AU1550_MEM_SDSREF 0x08D0
+#define AU1550_MEM_SDSLEEP MEM_SDSREF
/* Static Bus Controller */
#define MEM_STCFG0 0xB4001000
@@ -813,81 +757,14 @@ enum soc_au1200_ints {
#define MEM_STTIME3 0xB4001034
#define MEM_STADDR3 0xB4001038
-#if defined(CONFIG_SOC_AU1550) || defined(CONFIG_SOC_AU1200)
#define MEM_STNDCTL 0xB4001100
#define MEM_STSTAT 0xB4001104
#define MEM_STNAND_CMD 0x0
#define MEM_STNAND_ADDR 0x4
#define MEM_STNAND_DATA 0x20
-#endif
-
-
-/* Au1000 */
-#ifdef CONFIG_SOC_AU1000
-
-#define USB_OHCI_BASE 0x10100000 /* phys addr for ioremap */
-#define USB_HOST_CONFIG 0xB017FFFC
-#define FOR_PLATFORM_C_USB_HOST_INT AU1000_USB_HOST_INT
-#endif /* CONFIG_SOC_AU1000 */
-
-/* Au1500 */
-#ifdef CONFIG_SOC_AU1500
-
-#define USB_OHCI_BASE 0x10100000 /* phys addr for ioremap */
-#define USB_HOST_CONFIG 0xB017fffc
-#define FOR_PLATFORM_C_USB_HOST_INT AU1500_USB_HOST_INT
-#endif /* CONFIG_SOC_AU1500 */
-
-/* Au1100 */
-#ifdef CONFIG_SOC_AU1100
-
-#define USB_OHCI_BASE 0x10100000 /* phys addr for ioremap */
-#define USB_HOST_CONFIG 0xB017FFFC
-#define FOR_PLATFORM_C_USB_HOST_INT AU1100_USB_HOST_INT
-#endif /* CONFIG_SOC_AU1100 */
-
-#ifdef CONFIG_SOC_AU1550
-
-#define USB_OHCI_BASE 0x14020000 /* phys addr for ioremap */
-#define USB_OHCI_LEN 0x00060000
-#define USB_HOST_CONFIG 0xB4027ffc
-#define FOR_PLATFORM_C_USB_HOST_INT AU1550_USB_HOST_INT
-#endif /* CONFIG_SOC_AU1550 */
-
-
-#ifdef CONFIG_SOC_AU1200
-
-#define USB_UOC_BASE 0x14020020
-#define USB_UOC_LEN 0x20
-#define USB_OHCI_BASE 0x14020100
-#define USB_OHCI_LEN 0x100
-#define USB_EHCI_BASE 0x14020200
-#define USB_EHCI_LEN 0x100
-#define USB_UDC_BASE 0x14022000
-#define USB_UDC_LEN 0x2000
-#define USB_MSR_BASE 0xB4020000
-#define USB_MSR_MCFG 4
-#define USBMSRMCFG_OMEMEN 0
-#define USBMSRMCFG_OBMEN 1
-#define USBMSRMCFG_EMEMEN 2
-#define USBMSRMCFG_EBMEN 3
-#define USBMSRMCFG_DMEMEN 4
-#define USBMSRMCFG_DBMEN 5
-#define USBMSRMCFG_GMEMEN 6
-#define USBMSRMCFG_OHCCLKEN 16
-#define USBMSRMCFG_EHCCLKEN 17
-#define USBMSRMCFG_UDCCLKEN 18
-#define USBMSRMCFG_PHYPLLEN 19
-#define USBMSRMCFG_RDCOMB 30
-#define USBMSRMCFG_PFEN 31
-
-#define FOR_PLATFORM_C_USB_HOST_INT AU1200_USB_INT
-
-#endif /* CONFIG_SOC_AU1200 */
-
/* Programmable Counters 0 and 1 */
#define SYS_BASE 0xB1900000
#define SYS_COUNTER_CNTRL (SYS_BASE + 0x14)
@@ -958,56 +835,6 @@ enum soc_au1200_ints {
# define I2S_CONTROL_D (1 << 1)
# define I2S_CONTROL_CE (1 << 0)
-/* USB Host Controller */
-#ifndef USB_OHCI_LEN
-#define USB_OHCI_LEN 0x00100000
-#endif
-
-#ifndef CONFIG_SOC_AU1200
-
-/* USB Device Controller */
-#define USBD_EP0RD 0xB0200000
-#define USBD_EP0WR 0xB0200004
-#define USBD_EP2WR 0xB0200008
-#define USBD_EP3WR 0xB020000C
-#define USBD_EP4RD 0xB0200010
-#define USBD_EP5RD 0xB0200014
-#define USBD_INTEN 0xB0200018
-#define USBD_INTSTAT 0xB020001C
-# define USBDEV_INT_SOF (1 << 12)
-# define USBDEV_INT_HF_BIT 6
-# define USBDEV_INT_HF_MASK (0x3f << USBDEV_INT_HF_BIT)
-# define USBDEV_INT_CMPLT_BIT 0
-# define USBDEV_INT_CMPLT_MASK (0x3f << USBDEV_INT_CMPLT_BIT)
-#define USBD_CONFIG 0xB0200020
-#define USBD_EP0CS 0xB0200024
-#define USBD_EP2CS 0xB0200028
-#define USBD_EP3CS 0xB020002C
-#define USBD_EP4CS 0xB0200030
-#define USBD_EP5CS 0xB0200034
-# define USBDEV_CS_SU (1 << 14)
-# define USBDEV_CS_NAK (1 << 13)
-# define USBDEV_CS_ACK (1 << 12)
-# define USBDEV_CS_BUSY (1 << 11)
-# define USBDEV_CS_TSIZE_BIT 1
-# define USBDEV_CS_TSIZE_MASK (0x3ff << USBDEV_CS_TSIZE_BIT)
-# define USBDEV_CS_STALL (1 << 0)
-#define USBD_EP0RDSTAT 0xB0200040
-#define USBD_EP0WRSTAT 0xB0200044
-#define USBD_EP2WRSTAT 0xB0200048
-#define USBD_EP3WRSTAT 0xB020004C
-#define USBD_EP4RDSTAT 0xB0200050
-#define USBD_EP5RDSTAT 0xB0200054
-# define USBDEV_FSTAT_FLUSH (1 << 6)
-# define USBDEV_FSTAT_UF (1 << 5)
-# define USBDEV_FSTAT_OF (1 << 4)
-# define USBDEV_FSTAT_FCNT_BIT 0
-# define USBDEV_FSTAT_FCNT_MASK (0x0f << USBDEV_FSTAT_FCNT_BIT)
-#define USBD_ENABLE 0xB0200058
-# define USBDEV_ENABLE (1 << 1)
-# define USBDEV_CE (1 << 0)
-
-#endif /* !CONFIG_SOC_AU1200 */
/* Ethernet Controllers */
@@ -1322,7 +1149,6 @@ enum soc_au1200_ints {
# define SYS_PF_MUST_BE_SET ((1 << 5) | (1 << 2))
/* Au1200 only */
-#ifdef CONFIG_SOC_AU1200
#define SYS_PINFUNC_DMA (1 << 31)
#define SYS_PINFUNC_S0A (1 << 30)
#define SYS_PINFUNC_S1A (1 << 29)
@@ -1350,7 +1176,6 @@ enum soc_au1200_ints {
#define SYS_PINFUNC_P0B (1 << 4)
#define SYS_PINFUNC_U0T (1 << 3)
#define SYS_PINFUNC_S1B (1 << 2)
-#endif
/* Power Management */
#define SYS_SCRATCH0 0xB1900018
@@ -1406,12 +1231,12 @@ enum soc_au1200_ints {
# define SYS_CS_MI2_MASK (0x7 << SYS_CS_MI2_BIT)
# define SYS_CS_DI2 (1 << 16)
# define SYS_CS_CI2 (1 << 15)
-#ifdef CONFIG_SOC_AU1100
+
# define SYS_CS_ML_BIT 7
# define SYS_CS_ML_MASK (0x7 << SYS_CS_ML_BIT)
# define SYS_CS_DL (1 << 6)
# define SYS_CS_CL (1 << 5)
-#else
+
# define SYS_CS_MUH_BIT 12
# define SYS_CS_MUH_MASK (0x7 << SYS_CS_MUH_BIT)
# define SYS_CS_DUH (1 << 11)
@@ -1420,7 +1245,7 @@ enum soc_au1200_ints {
# define SYS_CS_MUD_MASK (0x7 << SYS_CS_MUD_BIT)
# define SYS_CS_DUD (1 << 6)
# define SYS_CS_CUD (1 << 5)
-#endif
+
# define SYS_CS_MIR_BIT 2
# define SYS_CS_MIR_MASK (0x7 << SYS_CS_MIR_BIT)
# define SYS_CS_DIR (1 << 1)
@@ -1467,58 +1292,30 @@ enum soc_au1200_ints {
# define AC97C_RS (1 << 1)
# define AC97C_CE (1 << 0)
-#if defined(CONFIG_SOC_AU1500) || defined(CONFIG_SOC_AU1550)
-/* Au1500 PCI Controller */
-#define Au1500_CFG_BASE 0xB4005000 /* virtual, KSEG1 addr */
-#define Au1500_PCI_CMEM (Au1500_CFG_BASE + 0)
-#define Au1500_PCI_CFG (Au1500_CFG_BASE + 4)
-# define PCI_ERROR ((1 << 22) | (1 << 23) | (1 << 24) | \
- (1 << 25) | (1 << 26) | (1 << 27))
-#define Au1500_PCI_B2BMASK_CCH (Au1500_CFG_BASE + 8)
-#define Au1500_PCI_B2B0_VID (Au1500_CFG_BASE + 0xC)
-#define Au1500_PCI_B2B1_ID (Au1500_CFG_BASE + 0x10)
-#define Au1500_PCI_MWMASK_DEV (Au1500_CFG_BASE + 0x14)
-#define Au1500_PCI_MWBASE_REV_CCL (Au1500_CFG_BASE + 0x18)
-#define Au1500_PCI_ERR_ADDR (Au1500_CFG_BASE + 0x1C)
-#define Au1500_PCI_SPEC_INTACK (Au1500_CFG_BASE + 0x20)
-#define Au1500_PCI_ID (Au1500_CFG_BASE + 0x100)
-#define Au1500_PCI_STATCMD (Au1500_CFG_BASE + 0x104)
-#define Au1500_PCI_CLASSREV (Au1500_CFG_BASE + 0x108)
-#define Au1500_PCI_HDRTYPE (Au1500_CFG_BASE + 0x10C)
-#define Au1500_PCI_MBAR (Au1500_CFG_BASE + 0x110)
-
-#define Au1500_PCI_HDR 0xB4005100 /* virtual, KSEG1 addr */
-/*
- * All of our structures, like PCI resource, have 32-bit members.
- * Drivers are expected to do an ioremap on the PCI MEM resource, but it's
- * hard to store 0x4 0000 0000 in a 32-bit type. We require a small patch
- * to __ioremap to check for addresses between (u32)Au1500_PCI_MEM_START and
- * (u32)Au1500_PCI_MEM_END and change those to the full 36-bit PCI MEM
- * addresses. For PCI I/O, it's simpler because we get to do the ioremap
- * ourselves and then adjust the device's resources.
+/* The PCI chip selects are outside the 32bit space, and since we can't
+ * just program the 36bit addresses into BARs, we have to take a chunk
+ * out of the 32bit space and reserve it for PCI. When these addresses
+ * are ioremap()ed, they'll be fixed up to the real 36bit address before
+ * being passed to the real ioremap function.
*/
-#define Au1500_EXT_CFG 0x600000000ULL
-#define Au1500_EXT_CFG_TYPE1 0x680000000ULL
-#define Au1500_PCI_IO_START 0x500000000ULL
-#define Au1500_PCI_IO_END 0x5000FFFFFULL
-#define Au1500_PCI_MEM_START 0x440000000ULL
-#define Au1500_PCI_MEM_END 0x44FFFFFFFULL
+#define ALCHEMY_PCI_MEMWIN_START (AU1500_PCI_MEM_PHYS_ADDR >> 4)
+#define ALCHEMY_PCI_MEMWIN_END (ALCHEMY_PCI_MEMWIN_START + 0x0FFFFFFF)
-#define PCI_IO_START 0x00001000
-#define PCI_IO_END 0x000FFFFF
-#define PCI_MEM_START 0x40000000
-#define PCI_MEM_END 0x4FFFFFFF
+/* for PCI IO it's simpler because we get to do the ioremap ourselves and then
+ * adjust the device's resources.
+ */
+#define ALCHEMY_PCI_IOWIN_START 0x00001000
+#define ALCHEMY_PCI_IOWIN_END 0x0000FFFF
-#define PCI_FIRST_DEVFN (0 << 3)
-#define PCI_LAST_DEVFN (19 << 3)
+#ifdef CONFIG_PCI
#define IOPORT_RESOURCE_START 0x00001000 /* skip legacy probing */
#define IOPORT_RESOURCE_END 0xffffffff
#define IOMEM_RESOURCE_START 0x10000000
#define IOMEM_RESOURCE_END 0xfffffffffULL
-#else /* Au1000 and Au1100 and Au1200 */
+#else
/* Don't allow any legacy ports probing */
#define IOPORT_RESOURCE_START 0x10000000
@@ -1526,13 +1323,77 @@ enum soc_au1200_ints {
#define IOMEM_RESOURCE_START 0x10000000
#define IOMEM_RESOURCE_END 0xfffffffffULL
-#define PCI_IO_START 0
-#define PCI_IO_END 0
-#define PCI_MEM_START 0
-#define PCI_MEM_END 0
-#define PCI_FIRST_DEVFN 0
-#define PCI_LAST_DEVFN 0
-
#endif
+/* PCI controller block register offsets */
+#define PCI_REG_CMEM 0x0000
+#define PCI_REG_CONFIG 0x0004
+#define PCI_REG_B2BMASK_CCH 0x0008
+#define PCI_REG_B2BBASE0_VID 0x000C
+#define PCI_REG_B2BBASE1_SID 0x0010
+#define PCI_REG_MWMASK_DEV 0x0014
+#define PCI_REG_MWBASE_REV_CCL 0x0018
+#define PCI_REG_ERR_ADDR 0x001C
+#define PCI_REG_SPEC_INTACK 0x0020
+#define PCI_REG_ID 0x0100
+#define PCI_REG_STATCMD 0x0104
+#define PCI_REG_CLASSREV 0x0108
+#define PCI_REG_PARAM 0x010C
+#define PCI_REG_MBAR 0x0110
+#define PCI_REG_TIMEOUT 0x0140
+
+/* PCI controller block register bits */
+#define PCI_CMEM_E (1 << 28) /* enable cacheable memory */
+#define PCI_CMEM_CMBASE(x) (((x) & 0x3fff) << 14)
+#define PCI_CMEM_CMMASK(x) ((x) & 0x3fff)
+#define PCI_CONFIG_ERD (1 << 27) /* pci error during R/W */
+#define PCI_CONFIG_ET (1 << 26) /* error in target mode */
+#define PCI_CONFIG_EF (1 << 25) /* fatal error */
+#define PCI_CONFIG_EP (1 << 24) /* parity error */
+#define PCI_CONFIG_EM (1 << 23) /* multiple errors */
+#define PCI_CONFIG_BM (1 << 22) /* bad master error */
+#define PCI_CONFIG_PD (1 << 20) /* PCI Disable */
+#define PCI_CONFIG_BME (1 << 19) /* Byte Mask Enable for reads */
+#define PCI_CONFIG_NC (1 << 16) /* mark mem access non-coherent */
+#define PCI_CONFIG_IA (1 << 15) /* INTA# enabled (target mode) */
+#define PCI_CONFIG_IP (1 << 13) /* int on PCI_PERR# */
+#define PCI_CONFIG_IS (1 << 12) /* int on PCI_SERR# */
+#define PCI_CONFIG_IMM (1 << 11) /* int on master abort */
+#define PCI_CONFIG_ITM (1 << 10) /* int on target abort (as master) */
+#define PCI_CONFIG_ITT (1 << 9) /* int on target abort (as target) */
+#define PCI_CONFIG_IPB (1 << 8) /* int on PERR# in bus master acc */
+#define PCI_CONFIG_SIC_NO (0 << 6) /* no byte mask changes */
+#define PCI_CONFIG_SIC_BA_ADR (1 << 6) /* on byte/hw acc, invert adr bits */
+#define PCI_CONFIG_SIC_HWA_DAT (2 << 6) /* on halfword acc, swap data */
+#define PCI_CONFIG_SIC_ALL (3 << 6) /* swap data bytes on all accesses */
+#define PCI_CONFIG_ST (1 << 5) /* swap data by target transactions */
+#define PCI_CONFIG_SM (1 << 4) /* swap data from PCI ctl */
+#define PCI_CONFIG_AEN (1 << 3) /* enable internal arbiter */
+#define PCI_CONFIG_R2H (1 << 2) /* REQ2# to hi-prio arbiter */
+#define PCI_CONFIG_R1H (1 << 1) /* REQ1# to hi-prio arbiter */
+#define PCI_CONFIG_CH (1 << 0) /* PCI ctl to hi-prio arbiter */
+#define PCI_B2BMASK_B2BMASK(x) (((x) & 0xffff) << 16)
+#define PCI_B2BMASK_CCH(x) ((x) & 0xffff) /* 16 upper bits of class code */
+#define PCI_B2BBASE0_VID_B0(x) (((x) & 0xffff) << 16)
+#define PCI_B2BBASE0_VID_SV(x) ((x) & 0xffff)
+#define PCI_B2BBASE1_SID_B1(x) (((x) & 0xffff) << 16)
+#define PCI_B2BBASE1_SID_SI(x) ((x) & 0xffff)
+#define PCI_MWMASKDEV_MWMASK(x) (((x) & 0xffff) << 16)
+#define PCI_MWMASKDEV_DEVID(x) ((x) & 0xffff)
+#define PCI_MWBASEREVCCL_BASE(x) (((x) & 0xffff) << 16)
+#define PCI_MWBASEREVCCL_REV(x) (((x) & 0xff) << 8)
+#define PCI_MWBASEREVCCL_CCL(x) ((x) & 0xff)
+#define PCI_ID_DID(x) (((x) & 0xffff) << 16)
+#define PCI_ID_VID(x) ((x) & 0xffff)
+#define PCI_STATCMD_STATUS(x) (((x) & 0xffff) << 16)
+#define PCI_STATCMD_CMD(x) ((x) & 0xffff)
+#define PCI_CLASSREV_CLASS(x) (((x) & 0x00ffffff) << 8)
+#define PCI_CLASSREV_REV(x) ((x) & 0xff)
+#define PCI_PARAM_BIST(x) (((x) & 0xff) << 24)
+#define PCI_PARAM_HT(x) (((x) & 0xff) << 16)
+#define PCI_PARAM_LT(x) (((x) & 0xff) << 8)
+#define PCI_PARAM_CLS(x) ((x) & 0xff)
+#define PCI_TIMEOUT_RETRIES(x) (((x) & 0xff) << 8) /* max retries */
+#define PCI_TIMEOUT_TO(x) ((x) & 0xff) /* target ready timeout */
+
#endif
diff --git a/arch/mips/include/asm/mach-au1x00/au1xxx.h b/arch/mips/include/asm/mach-au1x00/au1xxx.h
deleted file mode 100644
index 1b36550..0000000
--- a/arch/mips/include/asm/mach-au1x00/au1xxx.h
+++ /dev/null
@@ -1,43 +0,0 @@
-/*
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2 of the License, or (at your
- * option) any later version.
- *
- * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
- * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
- * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
- * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
- * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
- * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
- * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
- * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
- * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
- * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *
- * You should have received a copy of the GNU General Public License along
- * with this program; if not, write to the Free Software Foundation, Inc.,
- * 675 Mass Ave, Cambridge, MA 02139, USA.
- */
-
-#ifndef _AU1XXX_H_
-#define _AU1XXX_H_
-
-#include <asm/mach-au1x00/au1000.h>
-
-#if defined(CONFIG_MIPS_DB1000) || defined(CONFIG_MIPS_DB1100) || \
- defined(CONFIG_MIPS_DB1500) || defined(CONFIG_MIPS_DB1550)
-#include <asm/mach-db1x00/db1x00.h>
-
-#elif defined(CONFIG_MIPS_PB1550)
-#include <asm/mach-pb1x00/pb1550.h>
-
-#elif defined(CONFIG_MIPS_PB1200)
-#include <asm/mach-pb1x00/pb1200.h>
-
-#elif defined(CONFIG_MIPS_DB1200)
-#include <asm/mach-db1x00/db1200.h>
-
-#endif
-
-#endif /* _AU1XXX_H_ */
diff --git a/arch/mips/include/asm/mach-au1x00/au1xxx_dbdma.h b/arch/mips/include/asm/mach-au1x00/au1xxx_dbdma.h
index 2fdacfe..323ce2d 100644
--- a/arch/mips/include/asm/mach-au1x00/au1xxx_dbdma.h
+++ b/arch/mips/include/asm/mach-au1x00/au1xxx_dbdma.h
@@ -126,66 +126,62 @@ typedef volatile struct au1xxx_ddma_desc {
#define SW_STATUS_INUSE (1 << 0)
/* Command 0 device IDs. */
-#ifdef CONFIG_SOC_AU1550
-#define DSCR_CMD0_UART0_TX 0
-#define DSCR_CMD0_UART0_RX 1
-#define DSCR_CMD0_UART3_TX 2
-#define DSCR_CMD0_UART3_RX 3
-#define DSCR_CMD0_DMA_REQ0 4
-#define DSCR_CMD0_DMA_REQ1 5
-#define DSCR_CMD0_DMA_REQ2 6
-#define DSCR_CMD0_DMA_REQ3 7
-#define DSCR_CMD0_USBDEV_RX0 8
-#define DSCR_CMD0_USBDEV_TX0 9
-#define DSCR_CMD0_USBDEV_TX1 10
-#define DSCR_CMD0_USBDEV_TX2 11
-#define DSCR_CMD0_USBDEV_RX3 12
-#define DSCR_CMD0_USBDEV_RX4 13
-#define DSCR_CMD0_PSC0_TX 14
-#define DSCR_CMD0_PSC0_RX 15
-#define DSCR_CMD0_PSC1_TX 16
-#define DSCR_CMD0_PSC1_RX 17
-#define DSCR_CMD0_PSC2_TX 18
-#define DSCR_CMD0_PSC2_RX 19
-#define DSCR_CMD0_PSC3_TX 20
-#define DSCR_CMD0_PSC3_RX 21
-#define DSCR_CMD0_PCI_WRITE 22
-#define DSCR_CMD0_NAND_FLASH 23
-#define DSCR_CMD0_MAC0_RX 24
-#define DSCR_CMD0_MAC0_TX 25
-#define DSCR_CMD0_MAC1_RX 26
-#define DSCR_CMD0_MAC1_TX 27
-#endif /* CONFIG_SOC_AU1550 */
-
-#ifdef CONFIG_SOC_AU1200
-#define DSCR_CMD0_UART0_TX 0
-#define DSCR_CMD0_UART0_RX 1
-#define DSCR_CMD0_UART1_TX 2
-#define DSCR_CMD0_UART1_RX 3
-#define DSCR_CMD0_DMA_REQ0 4
-#define DSCR_CMD0_DMA_REQ1 5
-#define DSCR_CMD0_MAE_BE 6
-#define DSCR_CMD0_MAE_FE 7
-#define DSCR_CMD0_SDMS_TX0 8
-#define DSCR_CMD0_SDMS_RX0 9
-#define DSCR_CMD0_SDMS_TX1 10
-#define DSCR_CMD0_SDMS_RX1 11
-#define DSCR_CMD0_AES_TX 13
-#define DSCR_CMD0_AES_RX 12
-#define DSCR_CMD0_PSC0_TX 14
-#define DSCR_CMD0_PSC0_RX 15
-#define DSCR_CMD0_PSC1_TX 16
-#define DSCR_CMD0_PSC1_RX 17
-#define DSCR_CMD0_CIM_RXA 18
-#define DSCR_CMD0_CIM_RXB 19
-#define DSCR_CMD0_CIM_RXC 20
-#define DSCR_CMD0_MAE_BOTH 21
-#define DSCR_CMD0_LCD 22
-#define DSCR_CMD0_NAND_FLASH 23
-#define DSCR_CMD0_PSC0_SYNC 24
-#define DSCR_CMD0_PSC1_SYNC 25
-#define DSCR_CMD0_CIM_SYNC 26
-#endif /* CONFIG_SOC_AU1200 */
+#define AU1550_DSCR_CMD0_UART0_TX 0
+#define AU1550_DSCR_CMD0_UART0_RX 1
+#define AU1550_DSCR_CMD0_UART3_TX 2
+#define AU1550_DSCR_CMD0_UART3_RX 3
+#define AU1550_DSCR_CMD0_DMA_REQ0 4
+#define AU1550_DSCR_CMD0_DMA_REQ1 5
+#define AU1550_DSCR_CMD0_DMA_REQ2 6
+#define AU1550_DSCR_CMD0_DMA_REQ3 7
+#define AU1550_DSCR_CMD0_USBDEV_RX0 8
+#define AU1550_DSCR_CMD0_USBDEV_TX0 9
+#define AU1550_DSCR_CMD0_USBDEV_TX1 10
+#define AU1550_DSCR_CMD0_USBDEV_TX2 11
+#define AU1550_DSCR_CMD0_USBDEV_RX3 12
+#define AU1550_DSCR_CMD0_USBDEV_RX4 13
+#define AU1550_DSCR_CMD0_PSC0_TX 14
+#define AU1550_DSCR_CMD0_PSC0_RX 15
+#define AU1550_DSCR_CMD0_PSC1_TX 16
+#define AU1550_DSCR_CMD0_PSC1_RX 17
+#define AU1550_DSCR_CMD0_PSC2_TX 18
+#define AU1550_DSCR_CMD0_PSC2_RX 19
+#define AU1550_DSCR_CMD0_PSC3_TX 20
+#define AU1550_DSCR_CMD0_PSC3_RX 21
+#define AU1550_DSCR_CMD0_PCI_WRITE 22
+#define AU1550_DSCR_CMD0_NAND_FLASH 23
+#define AU1550_DSCR_CMD0_MAC0_RX 24
+#define AU1550_DSCR_CMD0_MAC0_TX 25
+#define AU1550_DSCR_CMD0_MAC1_RX 26
+#define AU1550_DSCR_CMD0_MAC1_TX 27
+
+#define AU1200_DSCR_CMD0_UART0_TX 0
+#define AU1200_DSCR_CMD0_UART0_RX 1
+#define AU1200_DSCR_CMD0_UART1_TX 2
+#define AU1200_DSCR_CMD0_UART1_RX 3
+#define AU1200_DSCR_CMD0_DMA_REQ0 4
+#define AU1200_DSCR_CMD0_DMA_REQ1 5
+#define AU1200_DSCR_CMD0_MAE_BE 6
+#define AU1200_DSCR_CMD0_MAE_FE 7
+#define AU1200_DSCR_CMD0_SDMS_TX0 8
+#define AU1200_DSCR_CMD0_SDMS_RX0 9
+#define AU1200_DSCR_CMD0_SDMS_TX1 10
+#define AU1200_DSCR_CMD0_SDMS_RX1 11
+#define AU1200_DSCR_CMD0_AES_TX 13
+#define AU1200_DSCR_CMD0_AES_RX 12
+#define AU1200_DSCR_CMD0_PSC0_TX 14
+#define AU1200_DSCR_CMD0_PSC0_RX 15
+#define AU1200_DSCR_CMD0_PSC1_TX 16
+#define AU1200_DSCR_CMD0_PSC1_RX 17
+#define AU1200_DSCR_CMD0_CIM_RXA 18
+#define AU1200_DSCR_CMD0_CIM_RXB 19
+#define AU1200_DSCR_CMD0_CIM_RXC 20
+#define AU1200_DSCR_CMD0_MAE_BOTH 21
+#define AU1200_DSCR_CMD0_LCD 22
+#define AU1200_DSCR_CMD0_NAND_FLASH 23
+#define AU1200_DSCR_CMD0_PSC0_SYNC 24
+#define AU1200_DSCR_CMD0_PSC1_SYNC 25
+#define AU1200_DSCR_CMD0_CIM_SYNC 26
#define DSCR_CMD0_THROTTLE 30
#define DSCR_CMD0_ALWAYS 31
diff --git a/arch/mips/include/asm/mach-au1x00/au1xxx_ide.h b/arch/mips/include/asm/mach-au1x00/au1xxx_ide.h
index 5656c72..e306384 100644
--- a/arch/mips/include/asm/mach-au1x00/au1xxx_ide.h
+++ b/arch/mips/include/asm/mach-au1x00/au1xxx_ide.h
@@ -58,6 +58,7 @@ typedef struct {
#endif
int irq;
u32 regbase;
+ int ddma_id;
} _auide_hwif;
/******************************************************************************/
diff --git a/arch/mips/include/asm/mach-au1x00/au1xxx_psc.h b/arch/mips/include/asm/mach-au1x00/au1xxx_psc.h
index 5a5cb73..4e3f3bc 100644
--- a/arch/mips/include/asm/mach-au1x00/au1xxx_psc.h
+++ b/arch/mips/include/asm/mach-au1x00/au1xxx_psc.h
@@ -33,19 +33,6 @@
#ifndef _AU1000_PSC_H_
#define _AU1000_PSC_H_
-/* The PSC base addresses. */
-#ifdef CONFIG_SOC_AU1550
-#define PSC0_BASE_ADDR 0xb1a00000
-#define PSC1_BASE_ADDR 0xb1b00000
-#define PSC2_BASE_ADDR 0xb0a00000
-#define PSC3_BASE_ADDR 0xb0b00000
-#endif
-
-#ifdef CONFIG_SOC_AU1200
-#define PSC0_BASE_ADDR 0xb1a00000
-#define PSC1_BASE_ADDR 0xb1b00000
-#endif
-
/*
* The PSC select and control registers are common to all protocols.
*/
@@ -80,19 +67,6 @@
#define PSC_AC97GPO_OFFSET 0x00000028
#define PSC_AC97GPI_OFFSET 0x0000002c
-#define AC97_PSC_SEL (AC97_PSC_BASE + PSC_SEL_OFFSET)
-#define AC97_PSC_CTRL (AC97_PSC_BASE + PSC_CTRL_OFFSET)
-#define PSC_AC97CFG (AC97_PSC_BASE + PSC_AC97CFG_OFFSET)
-#define PSC_AC97MSK (AC97_PSC_BASE + PSC_AC97MSK_OFFSET)
-#define PSC_AC97PCR (AC97_PSC_BASE + PSC_AC97PCR_OFFSET)
-#define PSC_AC97STAT (AC97_PSC_BASE + PSC_AC97STAT_OFFSET)
-#define PSC_AC97EVNT (AC97_PSC_BASE + PSC_AC97EVNT_OFFSET)
-#define PSC_AC97TXRX (AC97_PSC_BASE + PSC_AC97TXRX_OFFSET)
-#define PSC_AC97CDC (AC97_PSC_BASE + PSC_AC97CDC_OFFSET)
-#define PSC_AC97RST (AC97_PSC_BASE + PSC_AC97RST_OFFSET)
-#define PSC_AC97GPO (AC97_PSC_BASE + PSC_AC97GPO_OFFSET)
-#define PSC_AC97GPI (AC97_PSC_BASE + PSC_AC97GPI_OFFSET)
-
/* AC97 Config Register. */
#define PSC_AC97CFG_RT_MASK (3 << 30)
#define PSC_AC97CFG_RT_FIFO1 (0 << 30)
diff --git a/arch/mips/include/asm/mach-au1x00/gpio-au1000.h b/arch/mips/include/asm/mach-au1x00/gpio-au1000.h
index 1f41a52..73853b5a 100644
--- a/arch/mips/include/asm/mach-au1x00/gpio-au1000.h
+++ b/arch/mips/include/asm/mach-au1x00/gpio-au1000.h
@@ -347,17 +347,6 @@ static inline int alchemy_gpio2_to_irq(int gpio)
/**********************************************************************/
-/* On Au1000, Au1500 and Au1100 GPIOs won't work as inputs before
- * SYS_PININPUTEN is written to at least once. On Au1550/Au1200 this
- * register enables use of GPIOs as wake source.
- */
-static inline void alchemy_gpio1_input_enable(void)
-{
- void __iomem *base = (void __iomem *)KSEG1ADDR(AU1000_SYS_PHYS_ADDR);
- __raw_writel(0, base + SYS_PININPUTEN); /* the write op is key */
- wmb();
-}
-
/* GPIO2 shared interrupts and control */
static inline void __alchemy_gpio2_mod_int(int gpio2, int en)
@@ -561,6 +550,7 @@ static inline int alchemy_irq_to_gpio(int irq)
#ifndef CONFIG_GPIOLIB
+#ifdef CONFIG_ALCHEMY_GPIOINT_AU1000
#ifndef CONFIG_ALCHEMY_GPIO_INDIRECT /* case (4) */
@@ -665,24 +655,7 @@ static inline void gpio_unexport(unsigned gpio)
#endif /* !CONFIG_ALCHEMY_GPIO_INDIRECT */
-
-#else /* CONFIG GPIOLIB */
-
-
- /* using gpiolib to provide up to 2 gpio_chips for on-chip gpios */
-#ifndef CONFIG_ALCHEMY_GPIO_INDIRECT /* case (2) */
-
-/* get everything through gpiolib */
-#define gpio_to_irq __gpio_to_irq
-#define gpio_get_value __gpio_get_value
-#define gpio_set_value __gpio_set_value
-#define gpio_cansleep __gpio_cansleep
-#define irq_to_gpio alchemy_irq_to_gpio
-
-#include <asm-generic/gpio.h>
-
-#endif /* !CONFIG_ALCHEMY_GPIO_INDIRECT */
-
+#endif /* CONFIG_ALCHEMY_GPIOINT_AU1000 */
#endif /* !CONFIG_GPIOLIB */
diff --git a/arch/mips/include/asm/mach-au1x00/gpio.h b/arch/mips/include/asm/mach-au1x00/gpio.h
index c3f60cd..fcdc8c4 100644
--- a/arch/mips/include/asm/mach-au1x00/gpio.h
+++ b/arch/mips/include/asm/mach-au1x00/gpio.h
@@ -1,10 +1,83 @@
+/*
+ * Alchemy GPIO support.
+ *
+ * With CONFIG_GPIOLIB=y different types of on-chip GPIO can be supported within
+ * the same kernel image.
+ * With CONFIG_GPIOLIB=n, your board must select ALCHEMY_GPIOINT_AU1XXX for the
+ * appropriate CPU type (AU1000 currently).
+ */
+
#ifndef _ALCHEMY_GPIO_H_
#define _ALCHEMY_GPIO_H_
-#if defined(CONFIG_ALCHEMY_GPIOINT_AU1000)
-
+#include <asm/mach-au1x00/au1000.h>
#include <asm/mach-au1x00/gpio-au1000.h>
-#endif
+/* On Au1000, Au1500 and Au1100 GPIOs won't work as inputs before
+ * SYS_PININPUTEN is written to at least once. On Au1550/Au1200/Au1300 this
+ * register enables use of GPIOs as wake source.
+ */
+static inline void alchemy_gpio1_input_enable(void)
+{
+ void __iomem *base = (void __iomem *)KSEG1ADDR(AU1000_SYS_PHYS_ADDR);
+ __raw_writel(0, base + 0x110); /* the write op is key */
+ wmb();
+}
+
+
+/* Linux gpio framework integration.
+*
+* 4 use cases of Alchemy GPIOS:
+*(1) GPIOLIB=y, ALCHEMY_GPIO_INDIRECT=y:
+* Board must register gpiochips.
+*(2) GPIOLIB=y, ALCHEMY_GPIO_INDIRECT=n:
+* A gpiochip for the 75 GPIOs is registered.
+*
+*(3) GPIOLIB=n, ALCHEMY_GPIO_INDIRECT=y:
+* the boards' gpio.h must provide the linux gpio wrapper functions,
+*
+*(4) GPIOLIB=n, ALCHEMY_GPIO_INDIRECT=n:
+* inlinable gpio functions are provided which enable access to the
+* Au1300 gpios only by using the numbers straight out of the data-
+* sheets.
+
+* Cases 1 and 3 are intended for boards which want to provide their own
+* GPIO namespace and -operations (i.e. for example you have 8 GPIOs
+* which are in part provided by spare Au1300 GPIO pins and in part by
+* an external FPGA but you still want them to be accssible in linux
+* as gpio0-7. The board can of course use the alchemy_gpioX_* functions
+* as required).
+*/
+
+#ifdef CONFIG_GPIOLIB
+
+/* wraps the cpu-dependent irq_to_gpio functions */
+/* FIXME: gpiolib needs an irq_to_gpio hook */
+static inline int __au_irq_to_gpio(unsigned int irq)
+{
+ switch (alchemy_get_cputype()) {
+ case ALCHEMY_CPU_AU1000...ALCHEMY_CPU_AU1200:
+ return alchemy_irq_to_gpio(irq);
+ }
+ return -EINVAL;
+}
+
+
+/* using gpiolib to provide up to 2 gpio_chips for on-chip gpios */
+#ifndef CONFIG_ALCHEMY_GPIO_INDIRECT /* case (2) */
+
+/* get everything through gpiolib */
+#define gpio_to_irq __gpio_to_irq
+#define gpio_get_value __gpio_get_value
+#define gpio_set_value __gpio_set_value
+#define gpio_cansleep __gpio_cansleep
+#define irq_to_gpio __au_irq_to_gpio
+
+#include <asm-generic/gpio.h>
+
+#endif /* !CONFIG_ALCHEMY_GPIO_INDIRECT */
+
+
+#endif /* CONFIG_GPIOLIB */
#endif /* _ALCHEMY_GPIO_H_ */
diff --git a/arch/mips/include/asm/mach-db1x00/db1200.h b/arch/mips/include/asm/mach-db1x00/db1200.h
index 3404248..7a39657 100644
--- a/arch/mips/include/asm/mach-db1x00/db1200.h
+++ b/arch/mips/include/asm/mach-db1x00/db1200.h
@@ -46,8 +46,6 @@
#define IDE_PHYS_ADDR 0x18800000
#define IDE_REG_SHIFT 5
-#define IDE_DDMA_REQ DSCR_CMD0_DMA_REQ1
-#define IDE_RQSIZE 128
#define DB1200_IDE_PHYS_ADDR IDE_PHYS_ADDR
#define DB1200_IDE_PHYS_LEN (16 << IDE_REG_SHIFT)
diff --git a/arch/mips/include/asm/mach-db1x00/db1x00.h b/arch/mips/include/asm/mach-db1x00/db1x00.h
index a919dac..a5affb0 100644
--- a/arch/mips/include/asm/mach-db1x00/db1x00.h
+++ b/arch/mips/include/asm/mach-db1x00/db1x00.h
@@ -31,15 +31,15 @@
#ifdef CONFIG_MIPS_DB1550
-#define DBDMA_AC97_TX_CHAN DSCR_CMD0_PSC1_TX
-#define DBDMA_AC97_RX_CHAN DSCR_CMD0_PSC1_RX
-#define DBDMA_I2S_TX_CHAN DSCR_CMD0_PSC3_TX
-#define DBDMA_I2S_RX_CHAN DSCR_CMD0_PSC3_RX
+#define DBDMA_AC97_TX_CHAN AU1550_DSCR_CMD0_PSC1_TX
+#define DBDMA_AC97_RX_CHAN AU1550_DSCR_CMD0_PSC1_RX
+#define DBDMA_I2S_TX_CHAN AU1550_DSCR_CMD0_PSC3_TX
+#define DBDMA_I2S_RX_CHAN AU1550_DSCR_CMD0_PSC3_RX
-#define SPI_PSC_BASE PSC0_BASE_ADDR
-#define AC97_PSC_BASE PSC1_BASE_ADDR
-#define SMBUS_PSC_BASE PSC2_BASE_ADDR
-#define I2S_PSC_BASE PSC3_BASE_ADDR
+#define SPI_PSC_BASE AU1550_PSC0_PHYS_ADDR
+#define AC97_PSC_BASE AU1550_PSC1_PHYS_ADDR
+#define SMBUS_PSC_BASE AU1550_PSC2_PHYS_ADDR
+#define I2S_PSC_BASE AU1550_PSC3_PHYS_ADDR
#define NAND_PHYS_ADDR 0x20000000
diff --git a/arch/mips/include/asm/mach-pb1x00/pb1200.h b/arch/mips/include/asm/mach-pb1x00/pb1200.h
index fce4332..374416a 100644
--- a/arch/mips/include/asm/mach-pb1x00/pb1200.h
+++ b/arch/mips/include/asm/mach-pb1x00/pb1200.h
@@ -28,23 +28,23 @@
#include <asm/mach-au1x00/au1000.h>
#include <asm/mach-au1x00/au1xxx_psc.h>
-#define DBDMA_AC97_TX_CHAN DSCR_CMD0_PSC1_TX
-#define DBDMA_AC97_RX_CHAN DSCR_CMD0_PSC1_RX
-#define DBDMA_I2S_TX_CHAN DSCR_CMD0_PSC1_TX
-#define DBDMA_I2S_RX_CHAN DSCR_CMD0_PSC1_RX
+#define DBDMA_AC97_TX_CHAN AU1200_DSCR_CMD0_PSC1_TX
+#define DBDMA_AC97_RX_CHAN AU1200_DSCR_CMD0_PSC1_RX
+#define DBDMA_I2S_TX_CHAN AU1200_DSCR_CMD0_PSC1_TX
+#define DBDMA_I2S_RX_CHAN AU1200_DSCR_CMD0_PSC1_RX
/*
* SPI and SMB are muxed on the Pb1200 board.
* Refer to board documentation.
*/
-#define SPI_PSC_BASE PSC0_BASE_ADDR
-#define SMBUS_PSC_BASE PSC0_BASE_ADDR
+#define SPI_PSC_BASE AU1550_PSC0_PHYS_ADDR
+#define SMBUS_PSC_BASE AU1550_PSC0_PHYS_ADDR
/*
* AC97 and I2S are muxed on the Pb1200 board.
* Refer to board documentation.
*/
-#define AC97_PSC_BASE PSC1_BASE_ADDR
-#define I2S_PSC_BASE PSC1_BASE_ADDR
+#define AC97_PSC_BASE AU1550_PSC1_PHYS_ADDR
+#define I2S_PSC_BASE AU1550_PSC1_PHYS_ADDR
#define BCSR_SYSTEM_VDDI 0x001F
@@ -76,8 +76,6 @@
#define IDE_REG_SHIFT 5
#define IDE_PHYS_LEN (16 << IDE_REG_SHIFT)
#define IDE_INT PB1200_IDE_INT
-#define IDE_DDMA_REQ DSCR_CMD0_DMA_REQ1
-#define IDE_RQSIZE 128
#define NAND_PHYS_ADDR 0x1C000000
diff --git a/arch/mips/include/asm/mach-pb1x00/pb1550.h b/arch/mips/include/asm/mach-pb1x00/pb1550.h
index f835c88..443b88a 100644
--- a/arch/mips/include/asm/mach-pb1x00/pb1550.h
+++ b/arch/mips/include/asm/mach-pb1x00/pb1550.h
@@ -30,15 +30,15 @@
#include <linux/types.h>
#include <asm/mach-au1x00/au1xxx_psc.h>
-#define DBDMA_AC97_TX_CHAN DSCR_CMD0_PSC1_TX
-#define DBDMA_AC97_RX_CHAN DSCR_CMD0_PSC1_RX
-#define DBDMA_I2S_TX_CHAN DSCR_CMD0_PSC3_TX
-#define DBDMA_I2S_RX_CHAN DSCR_CMD0_PSC3_RX
+#define DBDMA_AC97_TX_CHAN AU1550_DSCR_CMD0_PSC1_TX
+#define DBDMA_AC97_RX_CHAN AU1550_DSCR_CMD0_PSC1_RX
+#define DBDMA_I2S_TX_CHAN AU1550_DSCR_CMD0_PSC3_TX
+#define DBDMA_I2S_RX_CHAN AU1550_DSCR_CMD0_PSC3_RX
-#define SPI_PSC_BASE PSC0_BASE_ADDR
-#define AC97_PSC_BASE PSC1_BASE_ADDR
-#define SMBUS_PSC_BASE PSC2_BASE_ADDR
-#define I2S_PSC_BASE PSC3_BASE_ADDR
+#define SPI_PSC_BASE AU1550_PSC0_PHYS_ADDR
+#define AC97_PSC_BASE AU1550_PSC1_PHYS_ADDR
+#define SMBUS_PSC_BASE AU1550_PSC2_PHYS_ADDR
+#define I2S_PSC_BASE AU1550_PSC3_PHYS_ADDR
/*
* Timing values as described in databook, * ns value stripped of
diff --git a/arch/mips/include/asm/mipsprom.h b/arch/mips/include/asm/mipsprom.h
index 146d41b..e93943f 100644
--- a/arch/mips/include/asm/mipsprom.h
+++ b/arch/mips/include/asm/mipsprom.h
@@ -1,5 +1,5 @@
-#ifndef __ASM_MIPS_PROM_H
-#define __ASM_MIPS_PROM_H
+#ifndef __ASM_MIPSPROM_H
+#define __ASM_MIPSPROM_H
#define PROM_RESET 0
#define PROM_EXEC 1
@@ -73,4 +73,4 @@
extern char *prom_getenv(char *);
-#endif /* __ASM_MIPS_PROM_H */
+#endif /* __ASM_MIPSPROM_H */
diff --git a/arch/mips/include/asm/mipsregs.h b/arch/mips/include/asm/mipsregs.h
index 6a6f8a8..2ea7b81 100644
--- a/arch/mips/include/asm/mipsregs.h
+++ b/arch/mips/include/asm/mipsregs.h
@@ -1006,18 +1006,26 @@ do { \
#define write_c0_perfctrl0(val) __write_32bit_c0_register($25, 0, val)
#define read_c0_perfcntr0() __read_32bit_c0_register($25, 1)
#define write_c0_perfcntr0(val) __write_32bit_c0_register($25, 1, val)
+#define read_c0_perfcntr0_64() __read_64bit_c0_register($25, 1)
+#define write_c0_perfcntr0_64(val) __write_64bit_c0_register($25, 1, val)
#define read_c0_perfctrl1() __read_32bit_c0_register($25, 2)
#define write_c0_perfctrl1(val) __write_32bit_c0_register($25, 2, val)
#define read_c0_perfcntr1() __read_32bit_c0_register($25, 3)
#define write_c0_perfcntr1(val) __write_32bit_c0_register($25, 3, val)
+#define read_c0_perfcntr1_64() __read_64bit_c0_register($25, 3)
+#define write_c0_perfcntr1_64(val) __write_64bit_c0_register($25, 3, val)
#define read_c0_perfctrl2() __read_32bit_c0_register($25, 4)
#define write_c0_perfctrl2(val) __write_32bit_c0_register($25, 4, val)
#define read_c0_perfcntr2() __read_32bit_c0_register($25, 5)
#define write_c0_perfcntr2(val) __write_32bit_c0_register($25, 5, val)
+#define read_c0_perfcntr2_64() __read_64bit_c0_register($25, 5)
+#define write_c0_perfcntr2_64(val) __write_64bit_c0_register($25, 5, val)
#define read_c0_perfctrl3() __read_32bit_c0_register($25, 6)
#define write_c0_perfctrl3(val) __write_32bit_c0_register($25, 6, val)
#define read_c0_perfcntr3() __read_32bit_c0_register($25, 7)
#define write_c0_perfcntr3(val) __write_32bit_c0_register($25, 7, val)
+#define read_c0_perfcntr3_64() __read_64bit_c0_register($25, 7)
+#define write_c0_perfcntr3_64(val) __write_64bit_c0_register($25, 7, val)
/* RM9000 PerfCount performance counter register */
#define read_c0_perfcount() __read_64bit_c0_register($25, 0)
diff --git a/arch/mips/include/asm/prom.h b/arch/mips/include/asm/prom.h
index 857d9b7..7a6e82e 100644
--- a/arch/mips/include/asm/prom.h
+++ b/arch/mips/include/asm/prom.h
@@ -8,8 +8,8 @@
* published by the Free Software Foundation.
*
*/
-#ifndef __ASM_MIPS_PROM_H
-#define __ASM_MIPS_PROM_H
+#ifndef __ASM_PROM_H
+#define __ASM_PROM_H
#ifdef CONFIG_OF
#include <asm/bootinfo.h>
@@ -25,4 +25,4 @@ extern void device_tree_init(void);
static inline void device_tree_init(void) { }
#endif /* CONFIG_OF */
-#endif /* _ASM_MIPS_PROM_H */
+#endif /* __ASM_PROM_H */
diff --git a/arch/mips/include/asm/regdef.h b/arch/mips/include/asm/regdef.h
index 7c8ecb6..785a518 100644
--- a/arch/mips/include/asm/regdef.h
+++ b/arch/mips/include/asm/regdef.h
@@ -6,6 +6,8 @@
* Copyright (C) 1985 MIPS Computer Systems, Inc.
* Copyright (C) 1994, 95, 99, 2003 by Ralf Baechle
* Copyright (C) 1990 - 1992, 1999 Silicon Graphics, Inc.
+ * Copyright (C) 2011 Wind River Systems,
+ * written by Ralf Baechle <ralf@linux-mips.org>
*/
#ifndef _ASM_REGDEF_H
#define _ASM_REGDEF_H
@@ -30,9 +32,13 @@
#define t2 $10
#define t3 $11
#define t4 $12
+#define ta0 $12
#define t5 $13
+#define ta1 $13
#define t6 $14
+#define ta2 $14
#define t7 $15
+#define ta3 $15
#define s0 $16 /* callee saved */
#define s1 $17
#define s2 $18
diff --git a/arch/mips/jz4740/gpio.c b/arch/mips/jz4740/gpio.c
index 4397972..e1ddb95 100644
--- a/arch/mips/jz4740/gpio.c
+++ b/arch/mips/jz4740/gpio.c
@@ -17,8 +17,6 @@
#include <linux/module.h>
#include <linux/init.h>
-#include <linux/spinlock.h>
-#include <linux/syscore_ops.h>
#include <linux/io.h>
#include <linux/gpio.h>
#include <linux/delay.h>
@@ -30,6 +28,8 @@
#include <asm/mach-jz4740/base.h>
+#include "irq.h"
+
#define JZ4740_GPIO_BASE_A (32*0)
#define JZ4740_GPIO_BASE_B (32*1)
#define JZ4740_GPIO_BASE_C (32*2)
@@ -77,14 +77,10 @@
struct jz_gpio_chip {
unsigned int irq;
unsigned int irq_base;
- uint32_t wakeup;
- uint32_t suspend_mask;
uint32_t edge_trigger_both;
void __iomem *base;
- spinlock_t lock;
-
struct gpio_chip gpio_chip;
};
@@ -102,7 +98,8 @@ static inline struct jz_gpio_chip *gpio_chip_to_jz_gpio_chip(struct gpio_chip *g
static inline struct jz_gpio_chip *irq_to_jz_gpio_chip(struct irq_data *data)
{
- return irq_data_get_irq_chip_data(data);
+ struct irq_chip_generic *gc = irq_data_get_irq_chip_data(data);
+ return gc->private;
}
static inline void jz_gpio_write_bit(unsigned int gpio, unsigned int reg)
@@ -304,21 +301,15 @@ static void jz_gpio_irq_demux_handler(unsigned int irq, struct irq_desc *desc)
{
uint32_t flag;
unsigned int gpio_irq;
- unsigned int gpio_bank;
struct jz_gpio_chip *chip = irq_desc_get_handler_data(desc);
- gpio_bank = JZ4740_IRQ_GPIO0 - irq;
-
flag = readl(chip->base + JZ_REG_GPIO_FLAG);
-
if (!flag)
return;
- gpio_irq = __fls(flag);
+ gpio_irq = chip->irq_base + __fls(flag);
- jz_gpio_check_trigger_both(chip, irq);
-
- gpio_irq += (gpio_bank << 5) + JZ4740_IRQ_GPIO(0);
+ jz_gpio_check_trigger_both(chip, gpio_irq);
generic_handle_irq(gpio_irq);
};
@@ -329,18 +320,12 @@ static inline void jz_gpio_set_irq_bit(struct irq_data *data, unsigned int reg)
writel(IRQ_TO_BIT(data->irq), chip->base + reg);
}
-static void jz_gpio_irq_mask(struct irq_data *data)
-{
- jz_gpio_set_irq_bit(data, JZ_REG_GPIO_MASK_SET);
-};
-
static void jz_gpio_irq_unmask(struct irq_data *data)
{
struct jz_gpio_chip *chip = irq_to_jz_gpio_chip(data);
jz_gpio_check_trigger_both(chip, data->irq);
-
- jz_gpio_set_irq_bit(data, JZ_REG_GPIO_MASK_CLEAR);
+ irq_gc_unmask_enable_reg(data);
};
/* TODO: Check if function is gpio */
@@ -353,18 +338,13 @@ static unsigned int jz_gpio_irq_startup(struct irq_data *data)
static void jz_gpio_irq_shutdown(struct irq_data *data)
{
- jz_gpio_irq_mask(data);
+ irq_gc_mask_disable_reg(data);
/* Set direction to input */
jz_gpio_set_irq_bit(data, JZ_REG_GPIO_DIRECTION_CLEAR);
jz_gpio_set_irq_bit(data, JZ_REG_GPIO_SELECT_CLEAR);
}
-static void jz_gpio_irq_ack(struct irq_data *data)
-{
- jz_gpio_set_irq_bit(data, JZ_REG_GPIO_FLAG_CLEAR);
-};
-
static int jz_gpio_irq_set_type(struct irq_data *data, unsigned int flow_type)
{
struct jz_gpio_chip *chip = irq_to_jz_gpio_chip(data);
@@ -408,35 +388,13 @@ static int jz_gpio_irq_set_type(struct irq_data *data, unsigned int flow_type)
static int jz_gpio_irq_set_wake(struct irq_data *data, unsigned int on)
{
struct jz_gpio_chip *chip = irq_to_jz_gpio_chip(data);
- spin_lock(&chip->lock);
- if (on)
- chip->wakeup |= IRQ_TO_BIT(data->irq);
- else
- chip->wakeup &= ~IRQ_TO_BIT(data->irq);
- spin_unlock(&chip->lock);
+ irq_gc_set_wake(data, on);
irq_set_irq_wake(chip->irq, on);
+
return 0;
}
-static struct irq_chip jz_gpio_irq_chip = {
- .name = "GPIO",
- .irq_mask = jz_gpio_irq_mask,
- .irq_unmask = jz_gpio_irq_unmask,
- .irq_ack = jz_gpio_irq_ack,
- .irq_startup = jz_gpio_irq_startup,
- .irq_shutdown = jz_gpio_irq_shutdown,
- .irq_set_type = jz_gpio_irq_set_type,
- .irq_set_wake = jz_gpio_irq_set_wake,
- .flags = IRQCHIP_SET_TYPE_MASKED,
-};
-
-/*
- * This lock class tells lockdep that GPIO irqs are in a different
- * category than their parents, so it won't report false recursion.
- */
-static struct lock_class_key gpio_lock_class;
-
#define JZ4740_GPIO_CHIP(_bank) { \
.irq_base = JZ4740_IRQ_GPIO_BASE_ ## _bank, \
.gpio_chip = { \
@@ -458,64 +416,44 @@ static struct jz_gpio_chip jz4740_gpio_chips[] = {
JZ4740_GPIO_CHIP(D),
};
-static void jz4740_gpio_suspend_chip(struct jz_gpio_chip *chip)
-{
- chip->suspend_mask = readl(chip->base + JZ_REG_GPIO_MASK);
- writel(~(chip->wakeup), chip->base + JZ_REG_GPIO_MASK_SET);
- writel(chip->wakeup, chip->base + JZ_REG_GPIO_MASK_CLEAR);
-}
-
-static int jz4740_gpio_suspend(void)
-{
- int i;
-
- for (i = 0; i < ARRAY_SIZE(jz4740_gpio_chips); i++)
- jz4740_gpio_suspend_chip(&jz4740_gpio_chips[i]);
-
- return 0;
-}
-
-static void jz4740_gpio_resume_chip(struct jz_gpio_chip *chip)
+static void jz4740_gpio_chip_init(struct jz_gpio_chip *chip, unsigned int id)
{
- uint32_t mask = chip->suspend_mask;
+ struct irq_chip_generic *gc;
+ struct irq_chip_type *ct;
- writel(~mask, chip->base + JZ_REG_GPIO_MASK_CLEAR);
- writel(mask, chip->base + JZ_REG_GPIO_MASK_SET);
-}
+ chip->base = ioremap(JZ4740_GPIO_BASE_ADDR + (id * 0x100), 0x100);
-static void jz4740_gpio_resume(void)
-{
- int i;
+ chip->irq = JZ4740_IRQ_INTC_GPIO(id);
+ irq_set_handler_data(chip->irq, chip);
+ irq_set_chained_handler(chip->irq, jz_gpio_irq_demux_handler);
- for (i = ARRAY_SIZE(jz4740_gpio_chips) - 1; i >= 0 ; i--)
- jz4740_gpio_resume_chip(&jz4740_gpio_chips[i]);
-}
+ gc = irq_alloc_generic_chip(chip->gpio_chip.label, 1, chip->irq_base,
+ chip->base, handle_level_irq);
-static struct syscore_ops jz4740_gpio_syscore_ops = {
- .suspend = jz4740_gpio_suspend,
- .resume = jz4740_gpio_resume,
-};
+ gc->wake_enabled = IRQ_MSK(chip->gpio_chip.ngpio);
+ gc->private = chip;
-static void jz4740_gpio_chip_init(struct jz_gpio_chip *chip, unsigned int id)
-{
- int irq;
+ ct = gc->chip_types;
+ ct->regs.enable = JZ_REG_GPIO_MASK_CLEAR;
+ ct->regs.disable = JZ_REG_GPIO_MASK_SET;
+ ct->regs.ack = JZ_REG_GPIO_FLAG_CLEAR;
- spin_lock_init(&chip->lock);
+ ct->chip.name = "GPIO";
+ ct->chip.irq_mask = irq_gc_mask_disable_reg;
+ ct->chip.irq_unmask = jz_gpio_irq_unmask;
+ ct->chip.irq_ack = irq_gc_ack_set_bit;
+ ct->chip.irq_suspend = jz4740_irq_suspend;
+ ct->chip.irq_resume = jz4740_irq_resume;
+ ct->chip.irq_startup = jz_gpio_irq_startup;
+ ct->chip.irq_shutdown = jz_gpio_irq_shutdown;
+ ct->chip.irq_set_type = jz_gpio_irq_set_type;
+ ct->chip.irq_set_wake = jz_gpio_irq_set_wake;
+ ct->chip.flags = IRQCHIP_SET_TYPE_MASKED;
- chip->base = ioremap(JZ4740_GPIO_BASE_ADDR + (id * 0x100), 0x100);
+ irq_setup_generic_chip(gc, IRQ_MSK(chip->gpio_chip.ngpio),
+ IRQ_GC_INIT_NESTED_LOCK, 0, IRQ_NOPROBE | IRQ_LEVEL);
gpiochip_add(&chip->gpio_chip);
-
- chip->irq = JZ4740_IRQ_INTC_GPIO(id);
- irq_set_handler_data(chip->irq, chip);
- irq_set_chained_handler(chip->irq, jz_gpio_irq_demux_handler);
-
- for (irq = chip->irq_base; irq < chip->irq_base + chip->gpio_chip.ngpio; ++irq) {
- irq_set_lockdep_class(irq, &gpio_lock_class);
- irq_set_chip_data(irq, chip);
- irq_set_chip_and_handler(irq, &jz_gpio_irq_chip,
- handle_level_irq);
- }
}
static int __init jz4740_gpio_init(void)
@@ -525,8 +463,6 @@ static int __init jz4740_gpio_init(void)
for (i = 0; i < ARRAY_SIZE(jz4740_gpio_chips); ++i)
jz4740_gpio_chip_init(&jz4740_gpio_chips[i], i);
- register_syscore_ops(&jz4740_gpio_syscore_ops);
-
printk(KERN_INFO "JZ4740 GPIO initialized\n");
return 0;
diff --git a/arch/mips/jz4740/irq.c b/arch/mips/jz4740/irq.c
index d82c0c4..fc57ded 100644
--- a/arch/mips/jz4740/irq.c
+++ b/arch/mips/jz4740/irq.c
@@ -32,8 +32,6 @@
#include <asm/mach-jz4740/base.h>
static void __iomem *jz_intc_base;
-static uint32_t jz_intc_wakeup;
-static uint32_t jz_intc_saved;
#define JZ_REG_INTC_STATUS 0x00
#define JZ_REG_INTC_MASK 0x04
@@ -41,51 +39,36 @@ static uint32_t jz_intc_saved;
#define JZ_REG_INTC_CLEAR_MASK 0x0c
#define JZ_REG_INTC_PENDING 0x10
-#define IRQ_BIT(x) BIT((x) - JZ4740_IRQ_BASE)
-
-static inline unsigned long intc_irq_bit(struct irq_data *data)
+static irqreturn_t jz4740_cascade(int irq, void *data)
{
- return (unsigned long)irq_data_get_irq_chip_data(data);
-}
+ uint32_t irq_reg;
-static void intc_irq_unmask(struct irq_data *data)
-{
- writel(intc_irq_bit(data), jz_intc_base + JZ_REG_INTC_CLEAR_MASK);
-}
+ irq_reg = readl(jz_intc_base + JZ_REG_INTC_PENDING);
-static void intc_irq_mask(struct irq_data *data)
-{
- writel(intc_irq_bit(data), jz_intc_base + JZ_REG_INTC_SET_MASK);
+ if (irq_reg)
+ generic_handle_irq(__fls(irq_reg) + JZ4740_IRQ_BASE);
+
+ return IRQ_HANDLED;
}
-static int intc_irq_set_wake(struct irq_data *data, unsigned int on)
+static void jz4740_irq_set_mask(struct irq_chip_generic *gc, uint32_t mask)
{
- if (on)
- jz_intc_wakeup |= intc_irq_bit(data);
- else
- jz_intc_wakeup &= ~intc_irq_bit(data);
+ struct irq_chip_regs *regs = &gc->chip_types->regs;
- return 0;
+ writel(mask, gc->reg_base + regs->enable);
+ writel(~mask, gc->reg_base + regs->disable);
}
-static struct irq_chip intc_irq_type = {
- .name = "INTC",
- .irq_mask = intc_irq_mask,
- .irq_mask_ack = intc_irq_mask,
- .irq_unmask = intc_irq_unmask,
- .irq_set_wake = intc_irq_set_wake,
-};
-
-static irqreturn_t jz4740_cascade(int irq, void *data)
+void jz4740_irq_suspend(struct irq_data *data)
{
- uint32_t irq_reg;
-
- irq_reg = readl(jz_intc_base + JZ_REG_INTC_PENDING);
-
- if (irq_reg)
- generic_handle_irq(__fls(irq_reg) + JZ4740_IRQ_BASE);
+ struct irq_chip_generic *gc = irq_data_get_irq_chip_data(data);
+ jz4740_irq_set_mask(gc, gc->wake_active);
+}
- return IRQ_HANDLED;
+void jz4740_irq_resume(struct irq_data *data)
+{
+ struct irq_chip_generic *gc = irq_data_get_irq_chip_data(data);
+ jz4740_irq_set_mask(gc, gc->mask_cache);
}
static struct irqaction jz4740_cascade_action = {
@@ -95,7 +78,9 @@ static struct irqaction jz4740_cascade_action = {
void __init arch_init_irq(void)
{
- int i;
+ struct irq_chip_generic *gc;
+ struct irq_chip_type *ct;
+
mips_cpu_irq_init();
jz_intc_base = ioremap(JZ4740_INTC_BASE_ADDR, 0x14);
@@ -103,10 +88,22 @@ void __init arch_init_irq(void)
/* Mask all irqs */
writel(0xffffffff, jz_intc_base + JZ_REG_INTC_SET_MASK);
- for (i = JZ4740_IRQ_BASE; i < JZ4740_IRQ_BASE + 32; i++) {
- irq_set_chip_data(i, (void *)IRQ_BIT(i));
- irq_set_chip_and_handler(i, &intc_irq_type, handle_level_irq);
- }
+ gc = irq_alloc_generic_chip("INTC", 1, JZ4740_IRQ_BASE, jz_intc_base,
+ handle_level_irq);
+
+ gc->wake_enabled = IRQ_MSK(32);
+
+ ct = gc->chip_types;
+ ct->regs.enable = JZ_REG_INTC_CLEAR_MASK;
+ ct->regs.disable = JZ_REG_INTC_SET_MASK;
+ ct->chip.irq_unmask = irq_gc_unmask_enable_reg;
+ ct->chip.irq_mask = irq_gc_mask_disable_reg;
+ ct->chip.irq_mask_ack = irq_gc_mask_disable_reg;
+ ct->chip.irq_set_wake = irq_gc_set_wake;
+ ct->chip.irq_suspend = jz4740_irq_suspend;
+ ct->chip.irq_resume = jz4740_irq_resume;
+
+ irq_setup_generic_chip(gc, IRQ_MSK(32), 0, 0, IRQ_NOPROBE | IRQ_LEVEL);
setup_irq(2, &jz4740_cascade_action);
}
@@ -122,19 +119,6 @@ asmlinkage void plat_irq_dispatch(void)
spurious_interrupt();
}
-void jz4740_intc_suspend(void)
-{
- jz_intc_saved = readl(jz_intc_base + JZ_REG_INTC_MASK);
- writel(~jz_intc_wakeup, jz_intc_base + JZ_REG_INTC_SET_MASK);
- writel(jz_intc_wakeup, jz_intc_base + JZ_REG_INTC_CLEAR_MASK);
-}
-
-void jz4740_intc_resume(void)
-{
- writel(~jz_intc_saved, jz_intc_base + JZ_REG_INTC_CLEAR_MASK);
- writel(jz_intc_saved, jz_intc_base + JZ_REG_INTC_SET_MASK);
-}
-
#ifdef CONFIG_DEBUG_FS
static inline void intc_seq_reg(struct seq_file *s, const char *name,
diff --git a/arch/mips/jz4740/irq.h b/arch/mips/jz4740/irq.h
index 56b5ead..f75e39d 100644
--- a/arch/mips/jz4740/irq.h
+++ b/arch/mips/jz4740/irq.h
@@ -15,7 +15,9 @@
#ifndef __MIPS_JZ4740_IRQ_H__
#define __MIPS_JZ4740_IRQ_H__
-extern void jz4740_intc_suspend(void);
-extern void jz4740_intc_resume(void);
+#include <linux/irq.h>
+
+extern void jz4740_irq_suspend(struct irq_data *data);
+extern void jz4740_irq_resume(struct irq_data *data);
#endif
diff --git a/arch/mips/jz4740/pm.c b/arch/mips/jz4740/pm.c
index 902d5b5..6744fa7 100644
--- a/arch/mips/jz4740/pm.c
+++ b/arch/mips/jz4740/pm.c
@@ -21,11 +21,9 @@
#include <asm/mach-jz4740/clock.h>
#include "clock.h"
-#include "irq.h"
static int jz4740_pm_enter(suspend_state_t state)
{
- jz4740_intc_suspend();
jz4740_clock_suspend();
jz4740_clock_set_wait_mode(JZ4740_WAIT_MODE_SLEEP);
@@ -37,7 +35,6 @@ static int jz4740_pm_enter(suspend_state_t state)
jz4740_clock_set_wait_mode(JZ4740_WAIT_MODE_IDLE);
jz4740_clock_resume();
- jz4740_intc_resume();
return 0;
}
diff --git a/arch/mips/kernel/Makefile b/arch/mips/kernel/Makefile
index 83bba33..1a96618 100644
--- a/arch/mips/kernel/Makefile
+++ b/arch/mips/kernel/Makefile
@@ -11,6 +11,8 @@ obj-y += cpu-probe.o branch.o entry.o genex.o irq.o process.o \
ifdef CONFIG_FUNCTION_TRACER
CFLAGS_REMOVE_ftrace.o = -pg
CFLAGS_REMOVE_early_printk.o = -pg
+CFLAGS_REMOVE_perf_event.o = -pg
+CFLAGS_REMOVE_perf_event_mipsxx.o = -pg
endif
obj-$(CONFIG_CEVT_BCM1480) += cevt-bcm1480.o
@@ -106,7 +108,8 @@ obj-$(CONFIG_HAVE_STD_PC_SERIAL_PORT) += 8250-platform.o
obj-$(CONFIG_MIPS_CPUFREQ) += cpufreq/
-obj-$(CONFIG_HW_PERF_EVENTS) += perf_event.o
+obj-$(CONFIG_PERF_EVENTS) += perf_event.o
+obj-$(CONFIG_HW_PERF_EVENTS) += perf_event_mipsxx.o
obj-$(CONFIG_JUMP_LABEL) += jump_label.o
diff --git a/arch/mips/kernel/cpu-probe.c b/arch/mips/kernel/cpu-probe.c
index ebc0cd2..aa327a7 100644
--- a/arch/mips/kernel/cpu-probe.c
+++ b/arch/mips/kernel/cpu-probe.c
@@ -978,7 +978,10 @@ static inline void cpu_probe_cavium(struct cpuinfo_mips *c, unsigned int cpu)
platform:
set_elf_platform(cpu, "octeon");
break;
+ case PRID_IMP_CAVIUM_CN61XX:
case PRID_IMP_CAVIUM_CN63XX:
+ case PRID_IMP_CAVIUM_CN66XX:
+ case PRID_IMP_CAVIUM_CN68XX:
c->cputype = CPU_CAVIUM_OCTEON2;
__cpu_name[cpu] = "Cavium Octeon II";
set_elf_platform(cpu, "octeon2");
diff --git a/arch/mips/kernel/perf_event.c b/arch/mips/kernel/perf_event.c
index 0aee944..c1cf9c6 100644
--- a/arch/mips/kernel/perf_event.c
+++ b/arch/mips/kernel/perf_event.c
@@ -14,533 +14,16 @@
* published by the Free Software Foundation.
*/
-#include <linux/cpumask.h>
-#include <linux/interrupt.h>
-#include <linux/smp.h>
-#include <linux/kernel.h>
#include <linux/perf_event.h>
-#include <linux/uaccess.h>
-#include <asm/irq.h>
-#include <asm/irq_regs.h>
#include <asm/stacktrace.h>
-#include <asm/time.h> /* For perf_irq */
-
-/* These are for 32bit counters. For 64bit ones, define them accordingly. */
-#define MAX_PERIOD ((1ULL << 32) - 1)
-#define VALID_COUNT 0x7fffffff
-#define TOTAL_BITS 32
-#define HIGHEST_BIT 31
-
-#define MIPS_MAX_HWEVENTS 4
-
-struct cpu_hw_events {
- /* Array of events on this cpu. */
- struct perf_event *events[MIPS_MAX_HWEVENTS];
-
- /*
- * Set the bit (indexed by the counter number) when the counter
- * is used for an event.
- */
- unsigned long used_mask[BITS_TO_LONGS(MIPS_MAX_HWEVENTS)];
-
- /*
- * The borrowed MSB for the performance counter. A MIPS performance
- * counter uses its bit 31 (for 32bit counters) or bit 63 (for 64bit
- * counters) as a factor of determining whether a counter overflow
- * should be signaled. So here we use a separate MSB for each
- * counter to make things easy.
- */
- unsigned long msbs[BITS_TO_LONGS(MIPS_MAX_HWEVENTS)];
-
- /*
- * Software copy of the control register for each performance counter.
- * MIPS CPUs vary in performance counters. They use this differently,
- * and even may not use it.
- */
- unsigned int saved_ctrl[MIPS_MAX_HWEVENTS];
-};
-DEFINE_PER_CPU(struct cpu_hw_events, cpu_hw_events) = {
- .saved_ctrl = {0},
-};
-
-/* The description of MIPS performance events. */
-struct mips_perf_event {
- unsigned int event_id;
- /*
- * MIPS performance counters are indexed starting from 0.
- * CNTR_EVEN indicates the indexes of the counters to be used are
- * even numbers.
- */
- unsigned int cntr_mask;
- #define CNTR_EVEN 0x55555555
- #define CNTR_ODD 0xaaaaaaaa
-#ifdef CONFIG_MIPS_MT_SMP
- enum {
- T = 0,
- V = 1,
- P = 2,
- } range;
-#else
- #define T
- #define V
- #define P
-#endif
-};
-
-static struct mips_perf_event raw_event;
-static DEFINE_MUTEX(raw_event_mutex);
-
-#define UNSUPPORTED_PERF_EVENT_ID 0xffffffff
-#define C(x) PERF_COUNT_HW_CACHE_##x
-
-struct mips_pmu {
- const char *name;
- int irq;
- irqreturn_t (*handle_irq)(int irq, void *dev);
- int (*handle_shared_irq)(void);
- void (*start)(void);
- void (*stop)(void);
- int (*alloc_counter)(struct cpu_hw_events *cpuc,
- struct hw_perf_event *hwc);
- u64 (*read_counter)(unsigned int idx);
- void (*write_counter)(unsigned int idx, u64 val);
- void (*enable_event)(struct hw_perf_event *evt, int idx);
- void (*disable_event)(int idx);
- const struct mips_perf_event *(*map_raw_event)(u64 config);
- const struct mips_perf_event (*general_event_map)[PERF_COUNT_HW_MAX];
- const struct mips_perf_event (*cache_event_map)
- [PERF_COUNT_HW_CACHE_MAX]
- [PERF_COUNT_HW_CACHE_OP_MAX]
- [PERF_COUNT_HW_CACHE_RESULT_MAX];
- unsigned int num_counters;
-};
-
-static const struct mips_pmu *mipspmu;
-
-static int
-mipspmu_event_set_period(struct perf_event *event,
- struct hw_perf_event *hwc,
- int idx)
-{
- struct cpu_hw_events *cpuc = &__get_cpu_var(cpu_hw_events);
- s64 left = local64_read(&hwc->period_left);
- s64 period = hwc->sample_period;
- int ret = 0;
- u64 uleft;
- unsigned long flags;
-
- if (unlikely(left <= -period)) {
- left = period;
- local64_set(&hwc->period_left, left);
- hwc->last_period = period;
- ret = 1;
- }
-
- if (unlikely(left <= 0)) {
- left += period;
- local64_set(&hwc->period_left, left);
- hwc->last_period = period;
- ret = 1;
- }
-
- if (left > (s64)MAX_PERIOD)
- left = MAX_PERIOD;
-
- local64_set(&hwc->prev_count, (u64)-left);
-
- local_irq_save(flags);
- uleft = (u64)(-left) & MAX_PERIOD;
- uleft > VALID_COUNT ?
- set_bit(idx, cpuc->msbs) : clear_bit(idx, cpuc->msbs);
- mipspmu->write_counter(idx, (u64)(-left) & VALID_COUNT);
- local_irq_restore(flags);
-
- perf_event_update_userpage(event);
-
- return ret;
-}
-
-static void mipspmu_event_update(struct perf_event *event,
- struct hw_perf_event *hwc,
- int idx)
-{
- struct cpu_hw_events *cpuc = &__get_cpu_var(cpu_hw_events);
- unsigned long flags;
- int shift = 64 - TOTAL_BITS;
- s64 prev_raw_count, new_raw_count;
- u64 delta;
-
-again:
- prev_raw_count = local64_read(&hwc->prev_count);
- local_irq_save(flags);
- /* Make the counter value be a "real" one. */
- new_raw_count = mipspmu->read_counter(idx);
- if (new_raw_count & (test_bit(idx, cpuc->msbs) << HIGHEST_BIT)) {
- new_raw_count &= VALID_COUNT;
- clear_bit(idx, cpuc->msbs);
- } else
- new_raw_count |= (test_bit(idx, cpuc->msbs) << HIGHEST_BIT);
- local_irq_restore(flags);
-
- if (local64_cmpxchg(&hwc->prev_count, prev_raw_count,
- new_raw_count) != prev_raw_count)
- goto again;
-
- delta = (new_raw_count << shift) - (prev_raw_count << shift);
- delta >>= shift;
-
- local64_add(delta, &event->count);
- local64_sub(delta, &hwc->period_left);
-}
-
-static void mipspmu_start(struct perf_event *event, int flags)
-{
- struct hw_perf_event *hwc = &event->hw;
-
- if (!mipspmu)
- return;
-
- if (flags & PERF_EF_RELOAD)
- WARN_ON_ONCE(!(hwc->state & PERF_HES_UPTODATE));
-
- hwc->state = 0;
-
- /* Set the period for the event. */
- mipspmu_event_set_period(event, hwc, hwc->idx);
-
- /* Enable the event. */
- mipspmu->enable_event(hwc, hwc->idx);
-}
-
-static void mipspmu_stop(struct perf_event *event, int flags)
-{
- struct hw_perf_event *hwc = &event->hw;
-
- if (!mipspmu)
- return;
-
- if (!(hwc->state & PERF_HES_STOPPED)) {
- /* We are working on a local event. */
- mipspmu->disable_event(hwc->idx);
- barrier();
- mipspmu_event_update(event, hwc, hwc->idx);
- hwc->state |= PERF_HES_STOPPED | PERF_HES_UPTODATE;
- }
-}
-
-static int mipspmu_add(struct perf_event *event, int flags)
-{
- struct cpu_hw_events *cpuc = &__get_cpu_var(cpu_hw_events);
- struct hw_perf_event *hwc = &event->hw;
- int idx;
- int err = 0;
-
- perf_pmu_disable(event->pmu);
-
- /* To look for a free counter for this event. */
- idx = mipspmu->alloc_counter(cpuc, hwc);
- if (idx < 0) {
- err = idx;
- goto out;
- }
-
- /*
- * If there is an event in the counter we are going to use then
- * make sure it is disabled.
- */
- event->hw.idx = idx;
- mipspmu->disable_event(idx);
- cpuc->events[idx] = event;
-
- hwc->state = PERF_HES_STOPPED | PERF_HES_UPTODATE;
- if (flags & PERF_EF_START)
- mipspmu_start(event, PERF_EF_RELOAD);
-
- /* Propagate our changes to the userspace mapping. */
- perf_event_update_userpage(event);
-
-out:
- perf_pmu_enable(event->pmu);
- return err;
-}
-
-static void mipspmu_del(struct perf_event *event, int flags)
-{
- struct cpu_hw_events *cpuc = &__get_cpu_var(cpu_hw_events);
- struct hw_perf_event *hwc = &event->hw;
- int idx = hwc->idx;
-
- WARN_ON(idx < 0 || idx >= mipspmu->num_counters);
-
- mipspmu_stop(event, PERF_EF_UPDATE);
- cpuc->events[idx] = NULL;
- clear_bit(idx, cpuc->used_mask);
-
- perf_event_update_userpage(event);
-}
-
-static void mipspmu_read(struct perf_event *event)
-{
- struct hw_perf_event *hwc = &event->hw;
-
- /* Don't read disabled counters! */
- if (hwc->idx < 0)
- return;
-
- mipspmu_event_update(event, hwc, hwc->idx);
-}
-
-static void mipspmu_enable(struct pmu *pmu)
-{
- if (mipspmu)
- mipspmu->start();
-}
-
-static void mipspmu_disable(struct pmu *pmu)
-{
- if (mipspmu)
- mipspmu->stop();
-}
-
-static atomic_t active_events = ATOMIC_INIT(0);
-static DEFINE_MUTEX(pmu_reserve_mutex);
-static int (*save_perf_irq)(void);
-
-static int mipspmu_get_irq(void)
-{
- int err;
-
- if (mipspmu->irq >= 0) {
- /* Request my own irq handler. */
- err = request_irq(mipspmu->irq, mipspmu->handle_irq,
- IRQF_DISABLED | IRQF_NOBALANCING,
- "mips_perf_pmu", NULL);
- if (err) {
- pr_warning("Unable to request IRQ%d for MIPS "
- "performance counters!\n", mipspmu->irq);
- }
- } else if (cp0_perfcount_irq < 0) {
- /*
- * We are sharing the irq number with the timer interrupt.
- */
- save_perf_irq = perf_irq;
- perf_irq = mipspmu->handle_shared_irq;
- err = 0;
- } else {
- pr_warning("The platform hasn't properly defined its "
- "interrupt controller.\n");
- err = -ENOENT;
- }
-
- return err;
-}
-
-static void mipspmu_free_irq(void)
-{
- if (mipspmu->irq >= 0)
- free_irq(mipspmu->irq, NULL);
- else if (cp0_perfcount_irq < 0)
- perf_irq = save_perf_irq;
-}
-
-/*
- * mipsxx/rm9000/loongson2 have different performance counters, they have
- * specific low-level init routines.
- */
-static void reset_counters(void *arg);
-static int __hw_perf_event_init(struct perf_event *event);
-
-static void hw_perf_event_destroy(struct perf_event *event)
-{
- if (atomic_dec_and_mutex_lock(&active_events,
- &pmu_reserve_mutex)) {
- /*
- * We must not call the destroy function with interrupts
- * disabled.
- */
- on_each_cpu(reset_counters,
- (void *)(long)mipspmu->num_counters, 1);
- mipspmu_free_irq();
- mutex_unlock(&pmu_reserve_mutex);
- }
-}
-
-static int mipspmu_event_init(struct perf_event *event)
-{
- int err = 0;
-
- switch (event->attr.type) {
- case PERF_TYPE_RAW:
- case PERF_TYPE_HARDWARE:
- case PERF_TYPE_HW_CACHE:
- break;
-
- default:
- return -ENOENT;
- }
-
- if (!mipspmu || event->cpu >= nr_cpumask_bits ||
- (event->cpu >= 0 && !cpu_online(event->cpu)))
- return -ENODEV;
-
- if (!atomic_inc_not_zero(&active_events)) {
- if (atomic_read(&active_events) > MIPS_MAX_HWEVENTS) {
- atomic_dec(&active_events);
- return -ENOSPC;
- }
-
- mutex_lock(&pmu_reserve_mutex);
- if (atomic_read(&active_events) == 0)
- err = mipspmu_get_irq();
-
- if (!err)
- atomic_inc(&active_events);
- mutex_unlock(&pmu_reserve_mutex);
- }
-
- if (err)
- return err;
-
- err = __hw_perf_event_init(event);
- if (err)
- hw_perf_event_destroy(event);
-
- return err;
-}
-
-static struct pmu pmu = {
- .pmu_enable = mipspmu_enable,
- .pmu_disable = mipspmu_disable,
- .event_init = mipspmu_event_init,
- .add = mipspmu_add,
- .del = mipspmu_del,
- .start = mipspmu_start,
- .stop = mipspmu_stop,
- .read = mipspmu_read,
-};
-
-static inline unsigned int
-mipspmu_perf_event_encode(const struct mips_perf_event *pev)
-{
-/*
- * Top 8 bits for range, next 16 bits for cntr_mask, lowest 8 bits for
- * event_id.
- */
-#ifdef CONFIG_MIPS_MT_SMP
- return ((unsigned int)pev->range << 24) |
- (pev->cntr_mask & 0xffff00) |
- (pev->event_id & 0xff);
-#else
- return (pev->cntr_mask & 0xffff00) |
- (pev->event_id & 0xff);
-#endif
-}
-
-static const struct mips_perf_event *
-mipspmu_map_general_event(int idx)
-{
- const struct mips_perf_event *pev;
-
- pev = ((*mipspmu->general_event_map)[idx].event_id ==
- UNSUPPORTED_PERF_EVENT_ID ? ERR_PTR(-EOPNOTSUPP) :
- &(*mipspmu->general_event_map)[idx]);
-
- return pev;
-}
-
-static const struct mips_perf_event *
-mipspmu_map_cache_event(u64 config)
-{
- unsigned int cache_type, cache_op, cache_result;
- const struct mips_perf_event *pev;
-
- cache_type = (config >> 0) & 0xff;
- if (cache_type >= PERF_COUNT_HW_CACHE_MAX)
- return ERR_PTR(-EINVAL);
-
- cache_op = (config >> 8) & 0xff;
- if (cache_op >= PERF_COUNT_HW_CACHE_OP_MAX)
- return ERR_PTR(-EINVAL);
-
- cache_result = (config >> 16) & 0xff;
- if (cache_result >= PERF_COUNT_HW_CACHE_RESULT_MAX)
- return ERR_PTR(-EINVAL);
-
- pev = &((*mipspmu->cache_event_map)
- [cache_type]
- [cache_op]
- [cache_result]);
-
- if (pev->event_id == UNSUPPORTED_PERF_EVENT_ID)
- return ERR_PTR(-EOPNOTSUPP);
-
- return pev;
-
-}
-
-static int validate_event(struct cpu_hw_events *cpuc,
- struct perf_event *event)
-{
- struct hw_perf_event fake_hwc = event->hw;
-
- /* Allow mixed event group. So return 1 to pass validation. */
- if (event->pmu != &pmu || event->state <= PERF_EVENT_STATE_OFF)
- return 1;
-
- return mipspmu->alloc_counter(cpuc, &fake_hwc) >= 0;
-}
-
-static int validate_group(struct perf_event *event)
-{
- struct perf_event *sibling, *leader = event->group_leader;
- struct cpu_hw_events fake_cpuc;
-
- memset(&fake_cpuc, 0, sizeof(fake_cpuc));
-
- if (!validate_event(&fake_cpuc, leader))
- return -ENOSPC;
-
- list_for_each_entry(sibling, &leader->sibling_list, group_entry) {
- if (!validate_event(&fake_cpuc, sibling))
- return -ENOSPC;
- }
-
- if (!validate_event(&fake_cpuc, event))
- return -ENOSPC;
-
- return 0;
-}
-
-/* This is needed by specific irq handlers in perf_event_*.c */
-static void
-handle_associated_event(struct cpu_hw_events *cpuc,
- int idx, struct perf_sample_data *data, struct pt_regs *regs)
-{
- struct perf_event *event = cpuc->events[idx];
- struct hw_perf_event *hwc = &event->hw;
-
- mipspmu_event_update(event, hwc, idx);
- data->period = event->hw.last_period;
- if (!mipspmu_event_set_period(event, hwc, idx))
- return;
-
- if (perf_event_overflow(event, data, regs))
- mipspmu->disable_event(idx);
-}
-
-#include "perf_event_mipsxx.c"
/* Callchain handling code. */
/*
* Leave userspace callchain empty for now. When we find a way to trace
- * the user stack callchains, we add here.
+ * the user stack callchains, we will add it here.
*/
-void perf_callchain_user(struct perf_callchain_entry *entry,
- struct pt_regs *regs)
-{
-}
static void save_raw_perf_callchain(struct perf_callchain_entry *entry,
unsigned long reg29)
diff --git a/arch/mips/kernel/perf_event_mipsxx.c b/arch/mips/kernel/perf_event_mipsxx.c
index e5ad09a..4f2971b 100644
--- a/arch/mips/kernel/perf_event_mipsxx.c
+++ b/arch/mips/kernel/perf_event_mipsxx.c
@@ -1,13 +1,112 @@
-#if defined(CONFIG_CPU_MIPS32) || defined(CONFIG_CPU_MIPS64) || \
- defined(CONFIG_CPU_R10000) || defined(CONFIG_CPU_SB1)
+/*
+ * Linux performance counter support for MIPS.
+ *
+ * Copyright (C) 2010 MIPS Technologies, Inc.
+ * Copyright (C) 2011 Cavium Networks, Inc.
+ * Author: Deng-Cheng Zhu
+ *
+ * This code is based on the implementation for ARM, which is in turn
+ * based on the sparc64 perf event code and the x86 code. Performance
+ * counter access is based on the MIPS Oprofile code. And the callchain
+ * support references the code of MIPS stacktrace.c.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/cpumask.h>
+#include <linux/interrupt.h>
+#include <linux/smp.h>
+#include <linux/kernel.h>
+#include <linux/perf_event.h>
+#include <linux/uaccess.h>
+
+#include <asm/irq.h>
+#include <asm/irq_regs.h>
+#include <asm/stacktrace.h>
+#include <asm/time.h> /* For perf_irq */
+
+#define MIPS_MAX_HWEVENTS 4
+
+struct cpu_hw_events {
+ /* Array of events on this cpu. */
+ struct perf_event *events[MIPS_MAX_HWEVENTS];
+
+ /*
+ * Set the bit (indexed by the counter number) when the counter
+ * is used for an event.
+ */
+ unsigned long used_mask[BITS_TO_LONGS(MIPS_MAX_HWEVENTS)];
+
+ /*
+ * Software copy of the control register for each performance counter.
+ * MIPS CPUs vary in performance counters. They use this differently,
+ * and even may not use it.
+ */
+ unsigned int saved_ctrl[MIPS_MAX_HWEVENTS];
+};
+DEFINE_PER_CPU(struct cpu_hw_events, cpu_hw_events) = {
+ .saved_ctrl = {0},
+};
+
+/* The description of MIPS performance events. */
+struct mips_perf_event {
+ unsigned int event_id;
+ /*
+ * MIPS performance counters are indexed starting from 0.
+ * CNTR_EVEN indicates the indexes of the counters to be used are
+ * even numbers.
+ */
+ unsigned int cntr_mask;
+ #define CNTR_EVEN 0x55555555
+ #define CNTR_ODD 0xaaaaaaaa
+ #define CNTR_ALL 0xffffffff
+#ifdef CONFIG_MIPS_MT_SMP
+ enum {
+ T = 0,
+ V = 1,
+ P = 2,
+ } range;
+#else
+ #define T
+ #define V
+ #define P
+#endif
+};
+
+static struct mips_perf_event raw_event;
+static DEFINE_MUTEX(raw_event_mutex);
+
+#define UNSUPPORTED_PERF_EVENT_ID 0xffffffff
+#define C(x) PERF_COUNT_HW_CACHE_##x
+
+struct mips_pmu {
+ u64 max_period;
+ u64 valid_count;
+ u64 overflow;
+ const char *name;
+ int irq;
+ u64 (*read_counter)(unsigned int idx);
+ void (*write_counter)(unsigned int idx, u64 val);
+ const struct mips_perf_event *(*map_raw_event)(u64 config);
+ const struct mips_perf_event (*general_event_map)[PERF_COUNT_HW_MAX];
+ const struct mips_perf_event (*cache_event_map)
+ [PERF_COUNT_HW_CACHE_MAX]
+ [PERF_COUNT_HW_CACHE_OP_MAX]
+ [PERF_COUNT_HW_CACHE_RESULT_MAX];
+ unsigned int num_counters;
+};
+
+static struct mips_pmu mipspmu;
#define M_CONFIG1_PC (1 << 4)
-#define M_PERFCTL_EXL (1UL << 0)
-#define M_PERFCTL_KERNEL (1UL << 1)
-#define M_PERFCTL_SUPERVISOR (1UL << 2)
-#define M_PERFCTL_USER (1UL << 3)
-#define M_PERFCTL_INTERRUPT_ENABLE (1UL << 4)
+#define M_PERFCTL_EXL (1 << 0)
+#define M_PERFCTL_KERNEL (1 << 1)
+#define M_PERFCTL_SUPERVISOR (1 << 2)
+#define M_PERFCTL_USER (1 << 3)
+#define M_PERFCTL_INTERRUPT_ENABLE (1 << 4)
#define M_PERFCTL_EVENT(event) (((event) & 0x3ff) << 5)
#define M_PERFCTL_VPEID(vpe) ((vpe) << 16)
#define M_PERFCTL_MT_EN(filter) ((filter) << 20)
@@ -15,8 +114,8 @@
#define M_TC_EN_VPE M_PERFCTL_MT_EN(1)
#define M_TC_EN_TC M_PERFCTL_MT_EN(2)
#define M_PERFCTL_TCID(tcid) ((tcid) << 22)
-#define M_PERFCTL_WIDE (1UL << 30)
-#define M_PERFCTL_MORE (1UL << 31)
+#define M_PERFCTL_WIDE (1 << 30)
+#define M_PERFCTL_MORE (1 << 31)
#define M_PERFCTL_COUNT_EVENT_WHENEVER (M_PERFCTL_EXL | \
M_PERFCTL_KERNEL | \
@@ -31,11 +130,12 @@
#endif
#define M_PERFCTL_EVENT_MASK 0xfe0
-#define M_COUNTER_OVERFLOW (1UL << 31)
#ifdef CONFIG_MIPS_MT_SMP
static int cpu_has_mipsmt_pertccounters;
+static DEFINE_RWLOCK(pmuint_rwlock);
+
/*
* FIXME: For VSMP, vpe_id() is redefined for Perf-events, because
* cpu_data[cpuid].vpe_id reports 0 for _both_ CPUs.
@@ -49,209 +149,673 @@ static int cpu_has_mipsmt_pertccounters;
#endif
/* Copied from op_model_mipsxx.c */
-static inline unsigned int vpe_shift(void)
+static unsigned int vpe_shift(void)
{
if (num_possible_cpus() > 1)
return 1;
return 0;
}
-#else /* !CONFIG_MIPS_MT_SMP */
-#define vpe_id() 0
-static inline unsigned int vpe_shift(void)
-{
- return 0;
-}
-#endif /* CONFIG_MIPS_MT_SMP */
-
-static inline unsigned int
-counters_total_to_per_cpu(unsigned int counters)
+static unsigned int counters_total_to_per_cpu(unsigned int counters)
{
return counters >> vpe_shift();
}
-static inline unsigned int
-counters_per_cpu_to_total(unsigned int counters)
+static unsigned int counters_per_cpu_to_total(unsigned int counters)
{
return counters << vpe_shift();
}
-#define __define_perf_accessors(r, n, np) \
- \
-static inline unsigned int r_c0_ ## r ## n(void) \
-{ \
- unsigned int cpu = vpe_id(); \
- \
- switch (cpu) { \
- case 0: \
- return read_c0_ ## r ## n(); \
- case 1: \
- return read_c0_ ## r ## np(); \
- default: \
- BUG(); \
- } \
- return 0; \
-} \
- \
-static inline void w_c0_ ## r ## n(unsigned int value) \
-{ \
- unsigned int cpu = vpe_id(); \
- \
- switch (cpu) { \
- case 0: \
- write_c0_ ## r ## n(value); \
- return; \
- case 1: \
- write_c0_ ## r ## np(value); \
- return; \
- default: \
- BUG(); \
- } \
- return; \
-} \
-
-__define_perf_accessors(perfcntr, 0, 2)
-__define_perf_accessors(perfcntr, 1, 3)
-__define_perf_accessors(perfcntr, 2, 0)
-__define_perf_accessors(perfcntr, 3, 1)
-
-__define_perf_accessors(perfctrl, 0, 2)
-__define_perf_accessors(perfctrl, 1, 3)
-__define_perf_accessors(perfctrl, 2, 0)
-__define_perf_accessors(perfctrl, 3, 1)
-
-static inline int __n_counters(void)
-{
- if (!(read_c0_config1() & M_CONFIG1_PC))
- return 0;
- if (!(read_c0_perfctrl0() & M_PERFCTL_MORE))
- return 1;
- if (!(read_c0_perfctrl1() & M_PERFCTL_MORE))
- return 2;
- if (!(read_c0_perfctrl2() & M_PERFCTL_MORE))
- return 3;
+#else /* !CONFIG_MIPS_MT_SMP */
+#define vpe_id() 0
- return 4;
-}
+#endif /* CONFIG_MIPS_MT_SMP */
-static inline int n_counters(void)
-{
- int counters;
+static void resume_local_counters(void);
+static void pause_local_counters(void);
+static irqreturn_t mipsxx_pmu_handle_irq(int, void *);
+static int mipsxx_pmu_handle_shared_irq(void);
- switch (current_cpu_type()) {
- case CPU_R10000:
- counters = 2;
- break;
+static unsigned int mipsxx_pmu_swizzle_perf_idx(unsigned int idx)
+{
+ if (vpe_id() == 1)
+ idx = (idx + 2) & 3;
+ return idx;
+}
- case CPU_R12000:
- case CPU_R14000:
- counters = 4;
- break;
+static u64 mipsxx_pmu_read_counter(unsigned int idx)
+{
+ idx = mipsxx_pmu_swizzle_perf_idx(idx);
+ switch (idx) {
+ case 0:
+ /*
+ * The counters are unsigned, we must cast to truncate
+ * off the high bits.
+ */
+ return (u32)read_c0_perfcntr0();
+ case 1:
+ return (u32)read_c0_perfcntr1();
+ case 2:
+ return (u32)read_c0_perfcntr2();
+ case 3:
+ return (u32)read_c0_perfcntr3();
default:
- counters = __n_counters();
+ WARN_ONCE(1, "Invalid performance counter number (%d)\n", idx);
+ return 0;
}
-
- return counters;
}
-static void reset_counters(void *arg)
+static u64 mipsxx_pmu_read_counter_64(unsigned int idx)
{
- int counters = (int)(long)arg;
- switch (counters) {
- case 4:
- w_c0_perfctrl3(0);
- w_c0_perfcntr3(0);
- case 3:
- w_c0_perfctrl2(0);
- w_c0_perfcntr2(0);
- case 2:
- w_c0_perfctrl1(0);
- w_c0_perfcntr1(0);
+ idx = mipsxx_pmu_swizzle_perf_idx(idx);
+
+ switch (idx) {
+ case 0:
+ return read_c0_perfcntr0_64();
case 1:
- w_c0_perfctrl0(0);
- w_c0_perfcntr0(0);
+ return read_c0_perfcntr1_64();
+ case 2:
+ return read_c0_perfcntr2_64();
+ case 3:
+ return read_c0_perfcntr3_64();
+ default:
+ WARN_ONCE(1, "Invalid performance counter number (%d)\n", idx);
+ return 0;
}
}
-static inline u64
-mipsxx_pmu_read_counter(unsigned int idx)
+static void mipsxx_pmu_write_counter(unsigned int idx, u64 val)
{
+ idx = mipsxx_pmu_swizzle_perf_idx(idx);
+
switch (idx) {
case 0:
- return r_c0_perfcntr0();
+ write_c0_perfcntr0(val);
+ return;
case 1:
- return r_c0_perfcntr1();
+ write_c0_perfcntr1(val);
+ return;
case 2:
- return r_c0_perfcntr2();
+ write_c0_perfcntr2(val);
+ return;
case 3:
- return r_c0_perfcntr3();
- default:
- WARN_ONCE(1, "Invalid performance counter number (%d)\n", idx);
- return 0;
+ write_c0_perfcntr3(val);
+ return;
}
}
-static inline void
-mipsxx_pmu_write_counter(unsigned int idx, u64 val)
+static void mipsxx_pmu_write_counter_64(unsigned int idx, u64 val)
{
+ idx = mipsxx_pmu_swizzle_perf_idx(idx);
+
switch (idx) {
case 0:
- w_c0_perfcntr0(val);
+ write_c0_perfcntr0_64(val);
return;
case 1:
- w_c0_perfcntr1(val);
+ write_c0_perfcntr1_64(val);
return;
case 2:
- w_c0_perfcntr2(val);
+ write_c0_perfcntr2_64(val);
return;
case 3:
- w_c0_perfcntr3(val);
+ write_c0_perfcntr3_64(val);
return;
}
}
-static inline unsigned int
-mipsxx_pmu_read_control(unsigned int idx)
+static unsigned int mipsxx_pmu_read_control(unsigned int idx)
{
+ idx = mipsxx_pmu_swizzle_perf_idx(idx);
+
switch (idx) {
case 0:
- return r_c0_perfctrl0();
+ return read_c0_perfctrl0();
case 1:
- return r_c0_perfctrl1();
+ return read_c0_perfctrl1();
case 2:
- return r_c0_perfctrl2();
+ return read_c0_perfctrl2();
case 3:
- return r_c0_perfctrl3();
+ return read_c0_perfctrl3();
default:
WARN_ONCE(1, "Invalid performance counter number (%d)\n", idx);
return 0;
}
}
-static inline void
-mipsxx_pmu_write_control(unsigned int idx, unsigned int val)
+static void mipsxx_pmu_write_control(unsigned int idx, unsigned int val)
{
+ idx = mipsxx_pmu_swizzle_perf_idx(idx);
+
switch (idx) {
case 0:
- w_c0_perfctrl0(val);
+ write_c0_perfctrl0(val);
return;
case 1:
- w_c0_perfctrl1(val);
+ write_c0_perfctrl1(val);
return;
case 2:
- w_c0_perfctrl2(val);
+ write_c0_perfctrl2(val);
return;
case 3:
- w_c0_perfctrl3(val);
+ write_c0_perfctrl3(val);
+ return;
+ }
+}
+
+static int mipsxx_pmu_alloc_counter(struct cpu_hw_events *cpuc,
+ struct hw_perf_event *hwc)
+{
+ int i;
+
+ /*
+ * We only need to care the counter mask. The range has been
+ * checked definitely.
+ */
+ unsigned long cntr_mask = (hwc->event_base >> 8) & 0xffff;
+
+ for (i = mipspmu.num_counters - 1; i >= 0; i--) {
+ /*
+ * Note that some MIPS perf events can be counted by both
+ * even and odd counters, wheresas many other are only by
+ * even _or_ odd counters. This introduces an issue that
+ * when the former kind of event takes the counter the
+ * latter kind of event wants to use, then the "counter
+ * allocation" for the latter event will fail. In fact if
+ * they can be dynamically swapped, they both feel happy.
+ * But here we leave this issue alone for now.
+ */
+ if (test_bit(i, &cntr_mask) &&
+ !test_and_set_bit(i, cpuc->used_mask))
+ return i;
+ }
+
+ return -EAGAIN;
+}
+
+static void mipsxx_pmu_enable_event(struct hw_perf_event *evt, int idx)
+{
+ struct cpu_hw_events *cpuc = &__get_cpu_var(cpu_hw_events);
+
+ WARN_ON(idx < 0 || idx >= mipspmu.num_counters);
+
+ cpuc->saved_ctrl[idx] = M_PERFCTL_EVENT(evt->event_base & 0xff) |
+ (evt->config_base & M_PERFCTL_CONFIG_MASK) |
+ /* Make sure interrupt enabled. */
+ M_PERFCTL_INTERRUPT_ENABLE;
+ /*
+ * We do not actually let the counter run. Leave it until start().
+ */
+}
+
+static void mipsxx_pmu_disable_event(int idx)
+{
+ struct cpu_hw_events *cpuc = &__get_cpu_var(cpu_hw_events);
+ unsigned long flags;
+
+ WARN_ON(idx < 0 || idx >= mipspmu.num_counters);
+
+ local_irq_save(flags);
+ cpuc->saved_ctrl[idx] = mipsxx_pmu_read_control(idx) &
+ ~M_PERFCTL_COUNT_EVENT_WHENEVER;
+ mipsxx_pmu_write_control(idx, cpuc->saved_ctrl[idx]);
+ local_irq_restore(flags);
+}
+
+static int mipspmu_event_set_period(struct perf_event *event,
+ struct hw_perf_event *hwc,
+ int idx)
+{
+ u64 left = local64_read(&hwc->period_left);
+ u64 period = hwc->sample_period;
+ int ret = 0;
+
+ if (unlikely((left + period) & (1ULL << 63))) {
+ /* left underflowed by more than period. */
+ left = period;
+ local64_set(&hwc->period_left, left);
+ hwc->last_period = period;
+ ret = 1;
+ } else if (unlikely((left + period) <= period)) {
+ /* left underflowed by less than period. */
+ left += period;
+ local64_set(&hwc->period_left, left);
+ hwc->last_period = period;
+ ret = 1;
+ }
+
+ if (left > mipspmu.max_period) {
+ left = mipspmu.max_period;
+ local64_set(&hwc->period_left, left);
+ }
+
+ local64_set(&hwc->prev_count, mipspmu.overflow - left);
+
+ mipspmu.write_counter(idx, mipspmu.overflow - left);
+
+ perf_event_update_userpage(event);
+
+ return ret;
+}
+
+static void mipspmu_event_update(struct perf_event *event,
+ struct hw_perf_event *hwc,
+ int idx)
+{
+ u64 prev_raw_count, new_raw_count;
+ u64 delta;
+
+again:
+ prev_raw_count = local64_read(&hwc->prev_count);
+ new_raw_count = mipspmu.read_counter(idx);
+
+ if (local64_cmpxchg(&hwc->prev_count, prev_raw_count,
+ new_raw_count) != prev_raw_count)
+ goto again;
+
+ delta = new_raw_count - prev_raw_count;
+
+ local64_add(delta, &event->count);
+ local64_sub(delta, &hwc->period_left);
+}
+
+static void mipspmu_start(struct perf_event *event, int flags)
+{
+ struct hw_perf_event *hwc = &event->hw;
+
+ if (flags & PERF_EF_RELOAD)
+ WARN_ON_ONCE(!(hwc->state & PERF_HES_UPTODATE));
+
+ hwc->state = 0;
+
+ /* Set the period for the event. */
+ mipspmu_event_set_period(event, hwc, hwc->idx);
+
+ /* Enable the event. */
+ mipsxx_pmu_enable_event(hwc, hwc->idx);
+}
+
+static void mipspmu_stop(struct perf_event *event, int flags)
+{
+ struct hw_perf_event *hwc = &event->hw;
+
+ if (!(hwc->state & PERF_HES_STOPPED)) {
+ /* We are working on a local event. */
+ mipsxx_pmu_disable_event(hwc->idx);
+ barrier();
+ mipspmu_event_update(event, hwc, hwc->idx);
+ hwc->state |= PERF_HES_STOPPED | PERF_HES_UPTODATE;
+ }
+}
+
+static int mipspmu_add(struct perf_event *event, int flags)
+{
+ struct cpu_hw_events *cpuc = &__get_cpu_var(cpu_hw_events);
+ struct hw_perf_event *hwc = &event->hw;
+ int idx;
+ int err = 0;
+
+ perf_pmu_disable(event->pmu);
+
+ /* To look for a free counter for this event. */
+ idx = mipsxx_pmu_alloc_counter(cpuc, hwc);
+ if (idx < 0) {
+ err = idx;
+ goto out;
+ }
+
+ /*
+ * If there is an event in the counter we are going to use then
+ * make sure it is disabled.
+ */
+ event->hw.idx = idx;
+ mipsxx_pmu_disable_event(idx);
+ cpuc->events[idx] = event;
+
+ hwc->state = PERF_HES_STOPPED | PERF_HES_UPTODATE;
+ if (flags & PERF_EF_START)
+ mipspmu_start(event, PERF_EF_RELOAD);
+
+ /* Propagate our changes to the userspace mapping. */
+ perf_event_update_userpage(event);
+
+out:
+ perf_pmu_enable(event->pmu);
+ return err;
+}
+
+static void mipspmu_del(struct perf_event *event, int flags)
+{
+ struct cpu_hw_events *cpuc = &__get_cpu_var(cpu_hw_events);
+ struct hw_perf_event *hwc = &event->hw;
+ int idx = hwc->idx;
+
+ WARN_ON(idx < 0 || idx >= mipspmu.num_counters);
+
+ mipspmu_stop(event, PERF_EF_UPDATE);
+ cpuc->events[idx] = NULL;
+ clear_bit(idx, cpuc->used_mask);
+
+ perf_event_update_userpage(event);
+}
+
+static void mipspmu_read(struct perf_event *event)
+{
+ struct hw_perf_event *hwc = &event->hw;
+
+ /* Don't read disabled counters! */
+ if (hwc->idx < 0)
return;
+
+ mipspmu_event_update(event, hwc, hwc->idx);
+}
+
+static void mipspmu_enable(struct pmu *pmu)
+{
+#ifdef CONFIG_MIPS_MT_SMP
+ write_unlock(&pmuint_rwlock);
+#endif
+ resume_local_counters();
+}
+
+/*
+ * MIPS performance counters can be per-TC. The control registers can
+ * not be directly accessed accross CPUs. Hence if we want to do global
+ * control, we need cross CPU calls. on_each_cpu() can help us, but we
+ * can not make sure this function is called with interrupts enabled. So
+ * here we pause local counters and then grab a rwlock and leave the
+ * counters on other CPUs alone. If any counter interrupt raises while
+ * we own the write lock, simply pause local counters on that CPU and
+ * spin in the handler. Also we know we won't be switched to another
+ * CPU after pausing local counters and before grabbing the lock.
+ */
+static void mipspmu_disable(struct pmu *pmu)
+{
+ pause_local_counters();
+#ifdef CONFIG_MIPS_MT_SMP
+ write_lock(&pmuint_rwlock);
+#endif
+}
+
+static atomic_t active_events = ATOMIC_INIT(0);
+static DEFINE_MUTEX(pmu_reserve_mutex);
+static int (*save_perf_irq)(void);
+
+static int mipspmu_get_irq(void)
+{
+ int err;
+
+ if (mipspmu.irq >= 0) {
+ /* Request my own irq handler. */
+ err = request_irq(mipspmu.irq, mipsxx_pmu_handle_irq,
+ IRQF_PERCPU | IRQF_NOBALANCING,
+ "mips_perf_pmu", NULL);
+ if (err) {
+ pr_warning("Unable to request IRQ%d for MIPS "
+ "performance counters!\n", mipspmu.irq);
+ }
+ } else if (cp0_perfcount_irq < 0) {
+ /*
+ * We are sharing the irq number with the timer interrupt.
+ */
+ save_perf_irq = perf_irq;
+ perf_irq = mipsxx_pmu_handle_shared_irq;
+ err = 0;
+ } else {
+ pr_warning("The platform hasn't properly defined its "
+ "interrupt controller.\n");
+ err = -ENOENT;
}
+
+ return err;
+}
+
+static void mipspmu_free_irq(void)
+{
+ if (mipspmu.irq >= 0)
+ free_irq(mipspmu.irq, NULL);
+ else if (cp0_perfcount_irq < 0)
+ perf_irq = save_perf_irq;
}
+/*
+ * mipsxx/rm9000/loongson2 have different performance counters, they have
+ * specific low-level init routines.
+ */
+static void reset_counters(void *arg);
+static int __hw_perf_event_init(struct perf_event *event);
+
+static void hw_perf_event_destroy(struct perf_event *event)
+{
+ if (atomic_dec_and_mutex_lock(&active_events,
+ &pmu_reserve_mutex)) {
+ /*
+ * We must not call the destroy function with interrupts
+ * disabled.
+ */
+ on_each_cpu(reset_counters,
+ (void *)(long)mipspmu.num_counters, 1);
+ mipspmu_free_irq();
+ mutex_unlock(&pmu_reserve_mutex);
+ }
+}
+
+static int mipspmu_event_init(struct perf_event *event)
+{
+ int err = 0;
+
+ switch (event->attr.type) {
+ case PERF_TYPE_RAW:
+ case PERF_TYPE_HARDWARE:
+ case PERF_TYPE_HW_CACHE:
+ break;
+
+ default:
+ return -ENOENT;
+ }
+
+ if (event->cpu >= nr_cpumask_bits ||
+ (event->cpu >= 0 && !cpu_online(event->cpu)))
+ return -ENODEV;
+
+ if (!atomic_inc_not_zero(&active_events)) {
+ if (atomic_read(&active_events) > MIPS_MAX_HWEVENTS) {
+ atomic_dec(&active_events);
+ return -ENOSPC;
+ }
+
+ mutex_lock(&pmu_reserve_mutex);
+ if (atomic_read(&active_events) == 0)
+ err = mipspmu_get_irq();
+
+ if (!err)
+ atomic_inc(&active_events);
+ mutex_unlock(&pmu_reserve_mutex);
+ }
+
+ if (err)
+ return err;
+
+ err = __hw_perf_event_init(event);
+ if (err)
+ hw_perf_event_destroy(event);
+
+ return err;
+}
+
+static struct pmu pmu = {
+ .pmu_enable = mipspmu_enable,
+ .pmu_disable = mipspmu_disable,
+ .event_init = mipspmu_event_init,
+ .add = mipspmu_add,
+ .del = mipspmu_del,
+ .start = mipspmu_start,
+ .stop = mipspmu_stop,
+ .read = mipspmu_read,
+};
+
+static unsigned int mipspmu_perf_event_encode(const struct mips_perf_event *pev)
+{
+/*
+ * Top 8 bits for range, next 16 bits for cntr_mask, lowest 8 bits for
+ * event_id.
+ */
#ifdef CONFIG_MIPS_MT_SMP
-static DEFINE_RWLOCK(pmuint_rwlock);
+ return ((unsigned int)pev->range << 24) |
+ (pev->cntr_mask & 0xffff00) |
+ (pev->event_id & 0xff);
+#else
+ return (pev->cntr_mask & 0xffff00) |
+ (pev->event_id & 0xff);
#endif
+}
+
+static const struct mips_perf_event *mipspmu_map_general_event(int idx)
+{
+ const struct mips_perf_event *pev;
+
+ pev = ((*mipspmu.general_event_map)[idx].event_id ==
+ UNSUPPORTED_PERF_EVENT_ID ? ERR_PTR(-EOPNOTSUPP) :
+ &(*mipspmu.general_event_map)[idx]);
+
+ return pev;
+}
+
+static const struct mips_perf_event *mipspmu_map_cache_event(u64 config)
+{
+ unsigned int cache_type, cache_op, cache_result;
+ const struct mips_perf_event *pev;
+
+ cache_type = (config >> 0) & 0xff;
+ if (cache_type >= PERF_COUNT_HW_CACHE_MAX)
+ return ERR_PTR(-EINVAL);
+
+ cache_op = (config >> 8) & 0xff;
+ if (cache_op >= PERF_COUNT_HW_CACHE_OP_MAX)
+ return ERR_PTR(-EINVAL);
+
+ cache_result = (config >> 16) & 0xff;
+ if (cache_result >= PERF_COUNT_HW_CACHE_RESULT_MAX)
+ return ERR_PTR(-EINVAL);
+
+ pev = &((*mipspmu.cache_event_map)
+ [cache_type]
+ [cache_op]
+ [cache_result]);
+
+ if (pev->event_id == UNSUPPORTED_PERF_EVENT_ID)
+ return ERR_PTR(-EOPNOTSUPP);
+
+ return pev;
+
+}
+
+static int validate_event(struct cpu_hw_events *cpuc,
+ struct perf_event *event)
+{
+ struct hw_perf_event fake_hwc = event->hw;
+
+ /* Allow mixed event group. So return 1 to pass validation. */
+ if (event->pmu != &pmu || event->state <= PERF_EVENT_STATE_OFF)
+ return 1;
+
+ return mipsxx_pmu_alloc_counter(cpuc, &fake_hwc) >= 0;
+}
+
+static int validate_group(struct perf_event *event)
+{
+ struct perf_event *sibling, *leader = event->group_leader;
+ struct cpu_hw_events fake_cpuc;
+
+ memset(&fake_cpuc, 0, sizeof(fake_cpuc));
+
+ if (!validate_event(&fake_cpuc, leader))
+ return -ENOSPC;
+
+ list_for_each_entry(sibling, &leader->sibling_list, group_entry) {
+ if (!validate_event(&fake_cpuc, sibling))
+ return -ENOSPC;
+ }
+
+ if (!validate_event(&fake_cpuc, event))
+ return -ENOSPC;
+
+ return 0;
+}
+
+/* This is needed by specific irq handlers in perf_event_*.c */
+static void handle_associated_event(struct cpu_hw_events *cpuc,
+ int idx, struct perf_sample_data *data,
+ struct pt_regs *regs)
+{
+ struct perf_event *event = cpuc->events[idx];
+ struct hw_perf_event *hwc = &event->hw;
+
+ mipspmu_event_update(event, hwc, idx);
+ data->period = event->hw.last_period;
+ if (!mipspmu_event_set_period(event, hwc, idx))
+ return;
+
+ if (perf_event_overflow(event, data, regs))
+ mipsxx_pmu_disable_event(idx);
+}
+
+
+static int __n_counters(void)
+{
+ if (!(read_c0_config1() & M_CONFIG1_PC))
+ return 0;
+ if (!(read_c0_perfctrl0() & M_PERFCTL_MORE))
+ return 1;
+ if (!(read_c0_perfctrl1() & M_PERFCTL_MORE))
+ return 2;
+ if (!(read_c0_perfctrl2() & M_PERFCTL_MORE))
+ return 3;
+
+ return 4;
+}
+
+static int n_counters(void)
+{
+ int counters;
+
+ switch (current_cpu_type()) {
+ case CPU_R10000:
+ counters = 2;
+ break;
+
+ case CPU_R12000:
+ case CPU_R14000:
+ counters = 4;
+ break;
+
+ default:
+ counters = __n_counters();
+ }
+
+ return counters;
+}
+
+static void reset_counters(void *arg)
+{
+ int counters = (int)(long)arg;
+ switch (counters) {
+ case 4:
+ mipsxx_pmu_write_control(3, 0);
+ mipspmu.write_counter(3, 0);
+ case 3:
+ mipsxx_pmu_write_control(2, 0);
+ mipspmu.write_counter(2, 0);
+ case 2:
+ mipsxx_pmu_write_control(1, 0);
+ mipspmu.write_counter(1, 0);
+ case 1:
+ mipsxx_pmu_write_control(0, 0);
+ mipspmu.write_counter(0, 0);
+ }
+}
/* 24K/34K/1004K cores can share the same event map. */
static const struct mips_perf_event mipsxxcore_event_map
@@ -277,6 +841,16 @@ static const struct mips_perf_event mipsxx74Kcore_event_map
[PERF_COUNT_HW_BUS_CYCLES] = { UNSUPPORTED_PERF_EVENT_ID },
};
+static const struct mips_perf_event octeon_event_map[PERF_COUNT_HW_MAX] = {
+ [PERF_COUNT_HW_CPU_CYCLES] = { 0x01, CNTR_ALL },
+ [PERF_COUNT_HW_INSTRUCTIONS] = { 0x03, CNTR_ALL },
+ [PERF_COUNT_HW_CACHE_REFERENCES] = { 0x2b, CNTR_ALL },
+ [PERF_COUNT_HW_CACHE_MISSES] = { 0x2e, CNTR_ALL },
+ [PERF_COUNT_HW_BRANCH_INSTRUCTIONS] = { 0x08, CNTR_ALL },
+ [PERF_COUNT_HW_BRANCH_MISSES] = { 0x09, CNTR_ALL },
+ [PERF_COUNT_HW_BUS_CYCLES] = { 0x25, CNTR_ALL },
+};
+
/* 24K/34K/1004K cores can share the same cache event map. */
static const struct mips_perf_event mipsxxcore_cache_map
[PERF_COUNT_HW_CACHE_MAX]
@@ -510,10 +1084,105 @@ static const struct mips_perf_event mipsxx74Kcore_cache_map
},
};
+
+static const struct mips_perf_event octeon_cache_map
+ [PERF_COUNT_HW_CACHE_MAX]
+ [PERF_COUNT_HW_CACHE_OP_MAX]
+ [PERF_COUNT_HW_CACHE_RESULT_MAX] = {
+[C(L1D)] = {
+ [C(OP_READ)] = {
+ [C(RESULT_ACCESS)] = { 0x2b, CNTR_ALL },
+ [C(RESULT_MISS)] = { 0x2e, CNTR_ALL },
+ },
+ [C(OP_WRITE)] = {
+ [C(RESULT_ACCESS)] = { 0x30, CNTR_ALL },
+ [C(RESULT_MISS)] = { UNSUPPORTED_PERF_EVENT_ID },
+ },
+ [C(OP_PREFETCH)] = {
+ [C(RESULT_ACCESS)] = { UNSUPPORTED_PERF_EVENT_ID },
+ [C(RESULT_MISS)] = { UNSUPPORTED_PERF_EVENT_ID },
+ },
+},
+[C(L1I)] = {
+ [C(OP_READ)] = {
+ [C(RESULT_ACCESS)] = { 0x18, CNTR_ALL },
+ [C(RESULT_MISS)] = { UNSUPPORTED_PERF_EVENT_ID },
+ },
+ [C(OP_WRITE)] = {
+ [C(RESULT_ACCESS)] = { UNSUPPORTED_PERF_EVENT_ID },
+ [C(RESULT_MISS)] = { UNSUPPORTED_PERF_EVENT_ID },
+ },
+ [C(OP_PREFETCH)] = {
+ [C(RESULT_ACCESS)] = { 0x19, CNTR_ALL },
+ [C(RESULT_MISS)] = { UNSUPPORTED_PERF_EVENT_ID },
+ },
+},
+[C(LL)] = {
+ [C(OP_READ)] = {
+ [C(RESULT_ACCESS)] = { UNSUPPORTED_PERF_EVENT_ID },
+ [C(RESULT_MISS)] = { UNSUPPORTED_PERF_EVENT_ID },
+ },
+ [C(OP_WRITE)] = {
+ [C(RESULT_ACCESS)] = { UNSUPPORTED_PERF_EVENT_ID },
+ [C(RESULT_MISS)] = { UNSUPPORTED_PERF_EVENT_ID },
+ },
+ [C(OP_PREFETCH)] = {
+ [C(RESULT_ACCESS)] = { UNSUPPORTED_PERF_EVENT_ID },
+ [C(RESULT_MISS)] = { UNSUPPORTED_PERF_EVENT_ID },
+ },
+},
+[C(DTLB)] = {
+ /*
+ * Only general DTLB misses are counted use the same event for
+ * read and write.
+ */
+ [C(OP_READ)] = {
+ [C(RESULT_ACCESS)] = { UNSUPPORTED_PERF_EVENT_ID },
+ [C(RESULT_MISS)] = { 0x35, CNTR_ALL },
+ },
+ [C(OP_WRITE)] = {
+ [C(RESULT_ACCESS)] = { UNSUPPORTED_PERF_EVENT_ID },
+ [C(RESULT_MISS)] = { 0x35, CNTR_ALL },
+ },
+ [C(OP_PREFETCH)] = {
+ [C(RESULT_ACCESS)] = { UNSUPPORTED_PERF_EVENT_ID },
+ [C(RESULT_MISS)] = { UNSUPPORTED_PERF_EVENT_ID },
+ },
+},
+[C(ITLB)] = {
+ [C(OP_READ)] = {
+ [C(RESULT_ACCESS)] = { UNSUPPORTED_PERF_EVENT_ID },
+ [C(RESULT_MISS)] = { 0x37, CNTR_ALL },
+ },
+ [C(OP_WRITE)] = {
+ [C(RESULT_ACCESS)] = { UNSUPPORTED_PERF_EVENT_ID },
+ [C(RESULT_MISS)] = { UNSUPPORTED_PERF_EVENT_ID },
+ },
+ [C(OP_PREFETCH)] = {
+ [C(RESULT_ACCESS)] = { UNSUPPORTED_PERF_EVENT_ID },
+ [C(RESULT_MISS)] = { UNSUPPORTED_PERF_EVENT_ID },
+ },
+},
+[C(BPU)] = {
+ /* Using the same code for *HW_BRANCH* */
+ [C(OP_READ)] = {
+ [C(RESULT_ACCESS)] = { UNSUPPORTED_PERF_EVENT_ID },
+ [C(RESULT_MISS)] = { UNSUPPORTED_PERF_EVENT_ID },
+ },
+ [C(OP_WRITE)] = {
+ [C(RESULT_ACCESS)] = { UNSUPPORTED_PERF_EVENT_ID },
+ [C(RESULT_MISS)] = { UNSUPPORTED_PERF_EVENT_ID },
+ },
+ [C(OP_PREFETCH)] = {
+ [C(RESULT_ACCESS)] = { UNSUPPORTED_PERF_EVENT_ID },
+ [C(RESULT_MISS)] = { UNSUPPORTED_PERF_EVENT_ID },
+ },
+},
+};
+
#ifdef CONFIG_MIPS_MT_SMP
-static void
-check_and_calc_range(struct perf_event *event,
- const struct mips_perf_event *pev)
+static void check_and_calc_range(struct perf_event *event,
+ const struct mips_perf_event *pev)
{
struct hw_perf_event *hwc = &event->hw;
@@ -536,9 +1205,8 @@ check_and_calc_range(struct perf_event *event,
hwc->config_base |= M_TC_EN_ALL;
}
#else
-static void
-check_and_calc_range(struct perf_event *event,
- const struct mips_perf_event *pev)
+static void check_and_calc_range(struct perf_event *event,
+ const struct mips_perf_event *pev)
{
}
#endif
@@ -560,7 +1228,7 @@ static int __hw_perf_event_init(struct perf_event *event)
} else if (PERF_TYPE_RAW == event->attr.type) {
/* We are working on the global raw event. */
mutex_lock(&raw_event_mutex);
- pev = mipspmu->map_raw_event(event->attr.config);
+ pev = mipspmu.map_raw_event(event->attr.config);
} else {
/* The event type is not (yet) supported. */
return -EOPNOTSUPP;
@@ -605,7 +1273,7 @@ static int __hw_perf_event_init(struct perf_event *event)
hwc->config = 0;
if (!hwc->sample_period) {
- hwc->sample_period = MAX_PERIOD;
+ hwc->sample_period = mipspmu.max_period;
hwc->last_period = hwc->sample_period;
local64_set(&hwc->period_left, hwc->sample_period);
}
@@ -618,70 +1286,47 @@ static int __hw_perf_event_init(struct perf_event *event)
}
event->destroy = hw_perf_event_destroy;
-
return err;
}
static void pause_local_counters(void)
{
struct cpu_hw_events *cpuc = &__get_cpu_var(cpu_hw_events);
- int counters = mipspmu->num_counters;
+ int ctr = mipspmu.num_counters;
unsigned long flags;
local_irq_save(flags);
- switch (counters) {
- case 4:
- cpuc->saved_ctrl[3] = r_c0_perfctrl3();
- w_c0_perfctrl3(cpuc->saved_ctrl[3] &
- ~M_PERFCTL_COUNT_EVENT_WHENEVER);
- case 3:
- cpuc->saved_ctrl[2] = r_c0_perfctrl2();
- w_c0_perfctrl2(cpuc->saved_ctrl[2] &
- ~M_PERFCTL_COUNT_EVENT_WHENEVER);
- case 2:
- cpuc->saved_ctrl[1] = r_c0_perfctrl1();
- w_c0_perfctrl1(cpuc->saved_ctrl[1] &
- ~M_PERFCTL_COUNT_EVENT_WHENEVER);
- case 1:
- cpuc->saved_ctrl[0] = r_c0_perfctrl0();
- w_c0_perfctrl0(cpuc->saved_ctrl[0] &
- ~M_PERFCTL_COUNT_EVENT_WHENEVER);
- }
+ do {
+ ctr--;
+ cpuc->saved_ctrl[ctr] = mipsxx_pmu_read_control(ctr);
+ mipsxx_pmu_write_control(ctr, cpuc->saved_ctrl[ctr] &
+ ~M_PERFCTL_COUNT_EVENT_WHENEVER);
+ } while (ctr > 0);
local_irq_restore(flags);
}
static void resume_local_counters(void)
{
struct cpu_hw_events *cpuc = &__get_cpu_var(cpu_hw_events);
- int counters = mipspmu->num_counters;
- unsigned long flags;
+ int ctr = mipspmu.num_counters;
- local_irq_save(flags);
- switch (counters) {
- case 4:
- w_c0_perfctrl3(cpuc->saved_ctrl[3]);
- case 3:
- w_c0_perfctrl2(cpuc->saved_ctrl[2]);
- case 2:
- w_c0_perfctrl1(cpuc->saved_ctrl[1]);
- case 1:
- w_c0_perfctrl0(cpuc->saved_ctrl[0]);
- }
- local_irq_restore(flags);
+ do {
+ ctr--;
+ mipsxx_pmu_write_control(ctr, cpuc->saved_ctrl[ctr]);
+ } while (ctr > 0);
}
static int mipsxx_pmu_handle_shared_irq(void)
{
struct cpu_hw_events *cpuc = &__get_cpu_var(cpu_hw_events);
struct perf_sample_data data;
- unsigned int counters = mipspmu->num_counters;
- unsigned int counter;
+ unsigned int counters = mipspmu.num_counters;
+ u64 counter;
int handled = IRQ_NONE;
struct pt_regs *regs;
if (cpu_has_mips_r2 && !(read_c0_cause() & (1 << 26)))
return handled;
-
/*
* First we pause the local counters, so that when we are locked
* here, the counters are all paused. When it gets locked due to
@@ -702,13 +1347,9 @@ static int mipsxx_pmu_handle_shared_irq(void)
#define HANDLE_COUNTER(n) \
case n + 1: \
if (test_bit(n, cpuc->used_mask)) { \
- counter = r_c0_perfcntr ## n(); \
- if (counter & M_COUNTER_OVERFLOW) { \
- w_c0_perfcntr ## n(counter & \
- VALID_COUNT); \
- if (test_and_change_bit(n, cpuc->msbs)) \
- handle_associated_event(cpuc, \
- n, &data, regs); \
+ counter = mipspmu.read_counter(n); \
+ if (counter & mipspmu.overflow) { \
+ handle_associated_event(cpuc, n, &data, regs); \
handled = IRQ_HANDLED; \
} \
}
@@ -733,104 +1374,11 @@ static int mipsxx_pmu_handle_shared_irq(void)
return handled;
}
-static irqreturn_t
-mipsxx_pmu_handle_irq(int irq, void *dev)
+static irqreturn_t mipsxx_pmu_handle_irq(int irq, void *dev)
{
return mipsxx_pmu_handle_shared_irq();
}
-static void mipsxx_pmu_start(void)
-{
-#ifdef CONFIG_MIPS_MT_SMP
- write_unlock(&pmuint_rwlock);
-#endif
- resume_local_counters();
-}
-
-/*
- * MIPS performance counters can be per-TC. The control registers can
- * not be directly accessed across CPUs. Hence if we want to do global
- * control, we need cross CPU calls. on_each_cpu() can help us, but we
- * can not make sure this function is called with interrupts enabled. So
- * here we pause local counters and then grab a rwlock and leave the
- * counters on other CPUs alone. If any counter interrupt raises while
- * we own the write lock, simply pause local counters on that CPU and
- * spin in the handler. Also we know we won't be switched to another
- * CPU after pausing local counters and before grabbing the lock.
- */
-static void mipsxx_pmu_stop(void)
-{
- pause_local_counters();
-#ifdef CONFIG_MIPS_MT_SMP
- write_lock(&pmuint_rwlock);
-#endif
-}
-
-static int
-mipsxx_pmu_alloc_counter(struct cpu_hw_events *cpuc,
- struct hw_perf_event *hwc)
-{
- int i;
-
- /*
- * We only need to care the counter mask. The range has been
- * checked definitely.
- */
- unsigned long cntr_mask = (hwc->event_base >> 8) & 0xffff;
-
- for (i = mipspmu->num_counters - 1; i >= 0; i--) {
- /*
- * Note that some MIPS perf events can be counted by both
- * even and odd counters, wheresas many other are only by
- * even _or_ odd counters. This introduces an issue that
- * when the former kind of event takes the counter the
- * latter kind of event wants to use, then the "counter
- * allocation" for the latter event will fail. In fact if
- * they can be dynamically swapped, they both feel happy.
- * But here we leave this issue alone for now.
- */
- if (test_bit(i, &cntr_mask) &&
- !test_and_set_bit(i, cpuc->used_mask))
- return i;
- }
-
- return -EAGAIN;
-}
-
-static void
-mipsxx_pmu_enable_event(struct hw_perf_event *evt, int idx)
-{
- struct cpu_hw_events *cpuc = &__get_cpu_var(cpu_hw_events);
- unsigned long flags;
-
- WARN_ON(idx < 0 || idx >= mipspmu->num_counters);
-
- local_irq_save(flags);
- cpuc->saved_ctrl[idx] = M_PERFCTL_EVENT(evt->event_base & 0xff) |
- (evt->config_base & M_PERFCTL_CONFIG_MASK) |
- /* Make sure interrupt enabled. */
- M_PERFCTL_INTERRUPT_ENABLE;
- /*
- * We do not actually let the counter run. Leave it until start().
- */
- local_irq_restore(flags);
-}
-
-static void
-mipsxx_pmu_disable_event(int idx)
-{
- struct cpu_hw_events *cpuc = &__get_cpu_var(cpu_hw_events);
- unsigned long flags;
-
- WARN_ON(idx < 0 || idx >= mipspmu->num_counters);
-
- local_irq_save(flags);
- cpuc->saved_ctrl[idx] = mipsxx_pmu_read_control(idx) &
- ~M_PERFCTL_COUNT_EVENT_WHENEVER;
- mipsxx_pmu_write_control(idx, cpuc->saved_ctrl[idx]);
- local_irq_restore(flags);
-}
-
/* 24K */
#define IS_UNSUPPORTED_24K_EVENT(r, b) \
((b) == 12 || (r) == 151 || (r) == 152 || (b) == 26 || \
@@ -892,8 +1440,7 @@ mipsxx_pmu_disable_event(int idx)
* then 128 needs to be added to 15 as the input for the event config,
* i.e., 143 (0x8F) to be used.
*/
-static const struct mips_perf_event *
-mipsxx_pmu_map_raw_event(u64 config)
+static const struct mips_perf_event *mipsxx_pmu_map_raw_event(u64 config)
{
unsigned int raw_id = config & 0xff;
unsigned int base_id = raw_id & 0x7f;
@@ -970,40 +1517,44 @@ mipsxx_pmu_map_raw_event(u64 config)
return &raw_event;
}
-static struct mips_pmu mipsxxcore_pmu = {
- .handle_irq = mipsxx_pmu_handle_irq,
- .handle_shared_irq = mipsxx_pmu_handle_shared_irq,
- .start = mipsxx_pmu_start,
- .stop = mipsxx_pmu_stop,
- .alloc_counter = mipsxx_pmu_alloc_counter,
- .read_counter = mipsxx_pmu_read_counter,
- .write_counter = mipsxx_pmu_write_counter,
- .enable_event = mipsxx_pmu_enable_event,
- .disable_event = mipsxx_pmu_disable_event,
- .map_raw_event = mipsxx_pmu_map_raw_event,
- .general_event_map = &mipsxxcore_event_map,
- .cache_event_map = &mipsxxcore_cache_map,
-};
+static const struct mips_perf_event *octeon_pmu_map_raw_event(u64 config)
+{
+ unsigned int raw_id = config & 0xff;
+ unsigned int base_id = raw_id & 0x7f;
-static struct mips_pmu mipsxx74Kcore_pmu = {
- .handle_irq = mipsxx_pmu_handle_irq,
- .handle_shared_irq = mipsxx_pmu_handle_shared_irq,
- .start = mipsxx_pmu_start,
- .stop = mipsxx_pmu_stop,
- .alloc_counter = mipsxx_pmu_alloc_counter,
- .read_counter = mipsxx_pmu_read_counter,
- .write_counter = mipsxx_pmu_write_counter,
- .enable_event = mipsxx_pmu_enable_event,
- .disable_event = mipsxx_pmu_disable_event,
- .map_raw_event = mipsxx_pmu_map_raw_event,
- .general_event_map = &mipsxx74Kcore_event_map,
- .cache_event_map = &mipsxx74Kcore_cache_map,
-};
+
+ raw_event.cntr_mask = CNTR_ALL;
+ raw_event.event_id = base_id;
+
+ if (current_cpu_type() == CPU_CAVIUM_OCTEON2) {
+ if (base_id > 0x42)
+ return ERR_PTR(-EOPNOTSUPP);
+ } else {
+ if (base_id > 0x3a)
+ return ERR_PTR(-EOPNOTSUPP);
+ }
+
+ switch (base_id) {
+ case 0x00:
+ case 0x0f:
+ case 0x1e:
+ case 0x1f:
+ case 0x2f:
+ case 0x34:
+ case 0x3b ... 0x3f:
+ return ERR_PTR(-EOPNOTSUPP);
+ default:
+ break;
+ }
+
+ return &raw_event;
+}
static int __init
init_hw_perf_events(void)
{
int counters, irq;
+ int counter_bits;
pr_info("Performance counters: ");
@@ -1035,32 +1586,36 @@ init_hw_perf_events(void)
}
#endif
- on_each_cpu(reset_counters, (void *)(long)counters, 1);
+ mipspmu.map_raw_event = mipsxx_pmu_map_raw_event;
switch (current_cpu_type()) {
case CPU_24K:
- mipsxxcore_pmu.name = "mips/24K";
- mipsxxcore_pmu.num_counters = counters;
- mipsxxcore_pmu.irq = irq;
- mipspmu = &mipsxxcore_pmu;
+ mipspmu.name = "mips/24K";
+ mipspmu.general_event_map = &mipsxxcore_event_map;
+ mipspmu.cache_event_map = &mipsxxcore_cache_map;
break;
case CPU_34K:
- mipsxxcore_pmu.name = "mips/34K";
- mipsxxcore_pmu.num_counters = counters;
- mipsxxcore_pmu.irq = irq;
- mipspmu = &mipsxxcore_pmu;
+ mipspmu.name = "mips/34K";
+ mipspmu.general_event_map = &mipsxxcore_event_map;
+ mipspmu.cache_event_map = &mipsxxcore_cache_map;
break;
case CPU_74K:
- mipsxx74Kcore_pmu.name = "mips/74K";
- mipsxx74Kcore_pmu.num_counters = counters;
- mipsxx74Kcore_pmu.irq = irq;
- mipspmu = &mipsxx74Kcore_pmu;
+ mipspmu.name = "mips/74K";
+ mipspmu.general_event_map = &mipsxx74Kcore_event_map;
+ mipspmu.cache_event_map = &mipsxx74Kcore_cache_map;
break;
case CPU_1004K:
- mipsxxcore_pmu.name = "mips/1004K";
- mipsxxcore_pmu.num_counters = counters;
- mipsxxcore_pmu.irq = irq;
- mipspmu = &mipsxxcore_pmu;
+ mipspmu.name = "mips/1004K";
+ mipspmu.general_event_map = &mipsxxcore_event_map;
+ mipspmu.cache_event_map = &mipsxxcore_cache_map;
+ break;
+ case CPU_CAVIUM_OCTEON:
+ case CPU_CAVIUM_OCTEON_PLUS:
+ case CPU_CAVIUM_OCTEON2:
+ mipspmu.name = "octeon";
+ mipspmu.general_event_map = &octeon_event_map;
+ mipspmu.cache_event_map = &octeon_cache_map;
+ mipspmu.map_raw_event = octeon_pmu_map_raw_event;
break;
default:
pr_cont("Either hardware does not support performance "
@@ -1068,15 +1623,33 @@ init_hw_perf_events(void)
return -ENODEV;
}
- if (mipspmu)
- pr_cont("%s PMU enabled, %d counters available to each "
- "CPU, irq %d%s\n", mipspmu->name, counters, irq,
- irq < 0 ? " (share with timer interrupt)" : "");
+ mipspmu.num_counters = counters;
+ mipspmu.irq = irq;
+
+ if (read_c0_perfctrl0() & M_PERFCTL_WIDE) {
+ mipspmu.max_period = (1ULL << 63) - 1;
+ mipspmu.valid_count = (1ULL << 63) - 1;
+ mipspmu.overflow = 1ULL << 63;
+ mipspmu.read_counter = mipsxx_pmu_read_counter_64;
+ mipspmu.write_counter = mipsxx_pmu_write_counter_64;
+ counter_bits = 64;
+ } else {
+ mipspmu.max_period = (1ULL << 31) - 1;
+ mipspmu.valid_count = (1ULL << 31) - 1;
+ mipspmu.overflow = 1ULL << 31;
+ mipspmu.read_counter = mipsxx_pmu_read_counter;
+ mipspmu.write_counter = mipsxx_pmu_write_counter;
+ counter_bits = 32;
+ }
+
+ on_each_cpu(reset_counters, (void *)(long)counters, 1);
+
+ pr_cont("%s PMU enabled, %d %d-bit counters available to each "
+ "CPU, irq %d%s\n", mipspmu.name, counters, counter_bits, irq,
+ irq < 0 ? " (share with timer interrupt)" : "");
perf_pmu_register(&pmu, "cpu", PERF_TYPE_RAW);
return 0;
}
early_initcall(init_hw_perf_events);
-
-#endif /* defined(CONFIG_CPU_MIPS32)... */
diff --git a/arch/mips/kernel/scall32-o32.S b/arch/mips/kernel/scall32-o32.S
index 865bc7a..4792065 100644
--- a/arch/mips/kernel/scall32-o32.S
+++ b/arch/mips/kernel/scall32-o32.S
@@ -496,7 +496,7 @@ einval: li v0, -ENOSYS
sys sys_lookup_dcookie 4
sys sys_epoll_create 1
sys sys_epoll_ctl 4
- sys sys_epoll_wait 3 /* 4250 */
+ sys sys_epoll_wait 4 /* 4250 */
sys sys_remap_file_pages 5
sys sys_set_tid_address 1
sys sys_restart_syscall 0
diff --git a/arch/mips/mm/c-octeon.c b/arch/mips/mm/c-octeon.c
index 16c4d25..daa81f7 100644
--- a/arch/mips/mm/c-octeon.c
+++ b/arch/mips/mm/c-octeon.c
@@ -169,6 +169,10 @@ static void octeon_flush_cache_page(struct vm_area_struct *vma,
octeon_flush_icache_all_cores(vma);
}
+static void octeon_flush_kernel_vmap_range(unsigned long vaddr, int size)
+{
+ BUG();
+}
/**
* Probe Octeon's caches
@@ -273,6 +277,8 @@ void __cpuinit octeon_cache_init(void)
flush_icache_range = octeon_flush_icache_range;
local_flush_icache_range = local_octeon_flush_icache_range;
+ __flush_kernel_vmap_range = octeon_flush_kernel_vmap_range;
+
build_clear_page();
build_copy_page();
}
diff --git a/arch/mips/mm/c-r3k.c b/arch/mips/mm/c-r3k.c
index e6b0efd..0765583 100644
--- a/arch/mips/mm/c-r3k.c
+++ b/arch/mips/mm/c-r3k.c
@@ -299,6 +299,11 @@ static void r3k_flush_cache_sigtramp(unsigned long addr)
write_c0_status(flags);
}
+static void r3k_flush_kernel_vmap_range(unsigned long vaddr, int size)
+{
+ BUG();
+}
+
static void r3k_dma_cache_wback_inv(unsigned long start, unsigned long size)
{
/* Catch bad driver code */
@@ -323,6 +328,8 @@ void __cpuinit r3k_cache_init(void)
flush_icache_range = r3k_flush_icache_range;
local_flush_icache_range = r3k_flush_icache_range;
+ __flush_kernel_vmap_range = r3k_flush_kernel_vmap_range;
+
flush_cache_sigtramp = r3k_flush_cache_sigtramp;
local_flush_data_cache_page = local_r3k_flush_data_cache_page;
flush_data_cache_page = r3k_flush_data_cache_page;
diff --git a/arch/mips/mm/c-r4k.c b/arch/mips/mm/c-r4k.c
index b9aabb9..a79fe9a 100644
--- a/arch/mips/mm/c-r4k.c
+++ b/arch/mips/mm/c-r4k.c
@@ -722,6 +722,39 @@ static void r4k_flush_icache_all(void)
r4k_blast_icache();
}
+struct flush_kernel_vmap_range_args {
+ unsigned long vaddr;
+ int size;
+};
+
+static inline void local_r4k_flush_kernel_vmap_range(void *args)
+{
+ struct flush_kernel_vmap_range_args *vmra = args;
+ unsigned long vaddr = vmra->vaddr;
+ int size = vmra->size;
+
+ /*
+ * Aliases only affect the primary caches so don't bother with
+ * S-caches or T-caches.
+ */
+ if (cpu_has_safe_index_cacheops && size >= dcache_size)
+ r4k_blast_dcache();
+ else {
+ R4600_HIT_CACHEOP_WAR_IMPL;
+ blast_dcache_range(vaddr, vaddr + size);
+ }
+}
+
+static void r4k_flush_kernel_vmap_range(unsigned long vaddr, int size)
+{
+ struct flush_kernel_vmap_range_args args;
+
+ args.vaddr = (unsigned long) vaddr;
+ args.size = size;
+
+ r4k_on_each_cpu(local_r4k_flush_kernel_vmap_range, &args);
+}
+
static inline void rm7k_erratum31(void)
{
const unsigned long ic_lsize = 32;
@@ -1403,6 +1436,8 @@ void __cpuinit r4k_cache_init(void)
flush_cache_page = r4k_flush_cache_page;
flush_cache_range = r4k_flush_cache_range;
+ __flush_kernel_vmap_range = r4k_flush_kernel_vmap_range;
+
flush_cache_sigtramp = r4k_flush_cache_sigtramp;
flush_icache_all = r4k_flush_icache_all;
local_flush_data_cache_page = local_r4k_flush_data_cache_page;
diff --git a/arch/mips/mm/c-tx39.c b/arch/mips/mm/c-tx39.c
index d352fad..a43c197c 100644
--- a/arch/mips/mm/c-tx39.c
+++ b/arch/mips/mm/c-tx39.c
@@ -253,6 +253,11 @@ static void tx39_flush_icache_range(unsigned long start, unsigned long end)
}
}
+static void tx39_flush_kernel_vmap_range(unsigned long vaddr, int size)
+{
+ BUG();
+}
+
static void tx39_dma_cache_wback_inv(unsigned long addr, unsigned long size)
{
unsigned long end;
@@ -394,6 +399,8 @@ void __cpuinit tx39_cache_init(void)
flush_icache_range = tx39_flush_icache_range;
local_flush_icache_range = tx39_flush_icache_range;
+ __flush_kernel_vmap_range = tx39_flush_kernel_vmap_range;
+
flush_cache_sigtramp = tx39_flush_cache_sigtramp;
local_flush_data_cache_page = local_tx39_flush_data_cache_page;
flush_data_cache_page = tx39_flush_data_cache_page;
diff --git a/arch/mips/mm/cache.c b/arch/mips/mm/cache.c
index 12af739..829320c 100644
--- a/arch/mips/mm/cache.c
+++ b/arch/mips/mm/cache.c
@@ -35,6 +35,11 @@ void (*local_flush_icache_range)(unsigned long start, unsigned long end);
void (*__flush_cache_vmap)(void);
void (*__flush_cache_vunmap)(void);
+void (*__flush_kernel_vmap_range)(unsigned long vaddr, int size);
+void (*__invalidate_kernel_vmap_range)(unsigned long vaddr, int size);
+
+EXPORT_SYMBOL_GPL(__flush_kernel_vmap_range);
+
/* MIPS specific cache operations */
void (*flush_cache_sigtramp)(unsigned long addr);
void (*local_flush_data_cache_page)(void * addr);
diff --git a/arch/mips/mm/tlb-r3k.c b/arch/mips/mm/tlb-r3k.c
index 40424af..87bb85d 100644
--- a/arch/mips/mm/tlb-r3k.c
+++ b/arch/mips/mm/tlb-r3k.c
@@ -223,8 +223,8 @@ void __update_tlb(struct vm_area_struct *vma, unsigned long address, pte_t pte)
local_irq_restore(flags);
}
-void __init add_wired_entry(unsigned long entrylo0, unsigned long entrylo1,
- unsigned long entryhi, unsigned long pagemask)
+void add_wired_entry(unsigned long entrylo0, unsigned long entrylo1,
+ unsigned long entryhi, unsigned long pagemask)
{
unsigned long flags;
unsigned long old_ctx;
diff --git a/arch/mips/mm/tlb-r4k.c b/arch/mips/mm/tlb-r4k.c
index ba40325..0d394e0 100644
--- a/arch/mips/mm/tlb-r4k.c
+++ b/arch/mips/mm/tlb-r4k.c
@@ -337,8 +337,8 @@ void __update_tlb(struct vm_area_struct * vma, unsigned long address, pte_t pte)
EXIT_CRITICAL(flags);
}
-void __init add_wired_entry(unsigned long entrylo0, unsigned long entrylo1,
- unsigned long entryhi, unsigned long pagemask)
+void add_wired_entry(unsigned long entrylo0, unsigned long entrylo1,
+ unsigned long entryhi, unsigned long pagemask)
{
unsigned long flags;
unsigned long wired;
diff --git a/arch/mips/netlogic/Platform b/arch/mips/netlogic/Platform
index f87c164..b648b48 100644
--- a/arch/mips/netlogic/Platform
+++ b/arch/mips/netlogic/Platform
@@ -5,6 +5,11 @@ cflags-$(CONFIG_NLM_COMMON) += -I$(srctree)/arch/mips/include/asm/mach-netlogic
cflags-$(CONFIG_NLM_COMMON) += -I$(srctree)/arch/mips/include/asm/netlogic
#
+# use mips64 if xlr is not available
+#
+cflags-$(CONFIG_NLM_XLR) += $(call cc-option,-march=xlr,-march=mips64)
+
+#
# NETLOGIC XLR/XLS SoC, Simulator and boards
#
core-$(CONFIG_NLM_XLR) += arch/mips/netlogic/xlr/
diff --git a/arch/mips/netlogic/xlr/setup.c b/arch/mips/netlogic/xlr/setup.c
index 4828025..cee25dd 100644
--- a/arch/mips/netlogic/xlr/setup.c
+++ b/arch/mips/netlogic/xlr/setup.c
@@ -53,7 +53,7 @@ unsigned long netlogic_io_base = (unsigned long)(DEFAULT_NETLOGIC_IO_BASE);
unsigned long nlm_common_ebase = 0x0;
struct psb_info nlm_prom_info;
-static void nlm_early_serial_setup(void)
+static void __init nlm_early_serial_setup(void)
{
struct uart_port s;
nlm_reg_t *uart_base;
@@ -101,7 +101,7 @@ void __init prom_free_prom_memory(void)
/* Nothing yet */
}
-static void build_arcs_cmdline(int *argv)
+static void __init build_arcs_cmdline(int *argv)
{
int i, remain, len;
char *arg;
diff --git a/arch/mips/netlogic/xlr/smp.c b/arch/mips/netlogic/xlr/smp.c
index d842bce..080284d 100644
--- a/arch/mips/netlogic/xlr/smp.c
+++ b/arch/mips/netlogic/xlr/smp.c
@@ -158,6 +158,10 @@ void __init nlm_smp_setup(void)
num_cpus = 1;
for (i = 0; i < NR_CPUS; i++) {
+ /*
+ * BSP is not set in nlm_cpu_ready array, it is only for
+ * ASPs (goto see smpboot.S)
+ */
if (nlm_cpu_ready[i]) {
cpu_set(i, phys_cpu_present_map);
__cpu_number_map[i] = num_cpus;
@@ -191,7 +195,7 @@ struct plat_smp_ops nlm_smp_ops = {
unsigned long secondary_entry_point;
-int nlm_wakeup_secondary_cpus(u32 wakeup_mask)
+int __cpuinit nlm_wakeup_secondary_cpus(u32 wakeup_mask)
{
unsigned int tid, pid, ipi, i, boot_cpu;
void *reset_vec;
diff --git a/arch/mips/netlogic/xlr/smpboot.S b/arch/mips/netlogic/xlr/smpboot.S
index b8e0744..8cb7889 100644
--- a/arch/mips/netlogic/xlr/smpboot.S
+++ b/arch/mips/netlogic/xlr/smpboot.S
@@ -32,17 +32,19 @@
* IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*/
+#include <linux/init.h>
+
#include <asm/asm.h>
#include <asm/asm-offsets.h>
#include <asm/regdef.h>
#include <asm/mipsregs.h>
-
-/* Don't jump to linux function from Bootloader stack. Change it
- * here. Kernel might allocate bootloader memory before all the CPUs are
- * brought up (eg: Inode cache region) and we better don't overwrite this
- * memory
+/*
+ * Early code for secondary CPUs. This will get them out of the bootloader
+ * code and into linux. Needed because the bootloader area will be taken
+ * and initialized by linux.
*/
+ __CPUINIT
NESTED(prom_pre_boot_secondary_cpus, 16, sp)
.set mips64
mfc0 t0, $15, 1 # read ebase
@@ -73,7 +75,11 @@ NESTED(prom_pre_boot_secondary_cpus, 16, sp)
jr t0
nop
END(prom_pre_boot_secondary_cpus)
+ __FINIT
+/*
+ * NMI code, used for CPU wakeup, copied to reset entry
+ */
NESTED(nlm_boot_smp_nmi, 0, sp)
.set push
.set noat
diff --git a/arch/mips/pci/Makefile b/arch/mips/pci/Makefile
index 4df8799..bb82cbdb 100644
--- a/arch/mips/pci/Makefile
+++ b/arch/mips/pci/Makefile
@@ -18,14 +18,13 @@ obj-$(CONFIG_PCI_TX4927) += ops-tx4927.o
obj-$(CONFIG_BCM47XX) += pci-bcm47xx.o
obj-$(CONFIG_BCM63XX) += pci-bcm63xx.o fixup-bcm63xx.o \
ops-bcm63xx.o
+obj-$(CONFIG_MIPS_ALCHEMY) += pci-alchemy.o
#
# These are still pretty much in the old state, watch, go blind.
#
obj-$(CONFIG_LASAT) += pci-lasat.o
obj-$(CONFIG_MIPS_COBALT) += fixup-cobalt.o
-obj-$(CONFIG_SOC_AU1500) += fixup-au1000.o ops-au1000.o
-obj-$(CONFIG_SOC_AU1550) += fixup-au1000.o ops-au1000.o
obj-$(CONFIG_SOC_PNX8550) += fixup-pnx8550.o ops-pnx8550.o
obj-$(CONFIG_LEMOTE_FULOONG2E) += fixup-fuloong2e.o ops-loongson2.o
obj-$(CONFIG_LEMOTE_MACH2F) += fixup-lemote2f.o ops-loongson2.o
diff --git a/arch/mips/pci/fixup-au1000.c b/arch/mips/pci/fixup-au1000.c
deleted file mode 100644
index e2ddfc4..0000000
--- a/arch/mips/pci/fixup-au1000.c
+++ /dev/null
@@ -1,43 +0,0 @@
-/*
- * BRIEF MODULE DESCRIPTION
- * Board specific PCI fixups.
- *
- * Copyright 2001-2003, 2008 MontaVista Software Inc.
- * Author: MontaVista Software, Inc. <source@mvista.com>
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2 of the License, or (at your
- * option) any later version.
- *
- * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
- * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
- * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
- * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
- * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
- * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
- * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
- * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
- * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
- * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *
- * You should have received a copy of the GNU General Public License along
- * with this program; if not, write to the Free Software Foundation, Inc.,
- * 675 Mass Ave, Cambridge, MA 02139, USA.
- */
-
-#include <linux/pci.h>
-#include <linux/init.h>
-
-extern char irq_tab_alchemy[][5];
-
-int __init pcibios_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
-{
- return irq_tab_alchemy[slot][pin];
-}
-
-/* Do platform specific device initialization at pci_enable_device() time */
-int pcibios_plat_dev_init(struct pci_dev *dev)
-{
- return 0;
-}
diff --git a/arch/mips/pci/ops-au1000.c b/arch/mips/pci/ops-au1000.c
deleted file mode 100644
index 9a57c5a..0000000
--- a/arch/mips/pci/ops-au1000.c
+++ /dev/null
@@ -1,308 +0,0 @@
-/*
- * BRIEF MODULE DESCRIPTION
- * Alchemy/AMD Au1xx0 PCI support.
- *
- * Copyright 2001-2003, 2007-2008 MontaVista Software Inc.
- * Author: MontaVista Software, Inc. <source@mvista.com>
- *
- * Support for all devices (greater than 16) added by David Gathright.
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2 of the License, or (at your
- * option) any later version.
- *
- * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
- * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
- * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
- * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
- * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
- * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
- * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
- * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
- * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
- * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *
- * You should have received a copy of the GNU General Public License along
- * with this program; if not, write to the Free Software Foundation, Inc.,
- * 675 Mass Ave, Cambridge, MA 02139, USA.
- */
-
-#include <linux/types.h>
-#include <linux/pci.h>
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/vmalloc.h>
-
-#include <asm/mach-au1x00/au1000.h>
-
-#undef DEBUG
-#ifdef DEBUG
-#define DBG(x...) printk(KERN_DEBUG x)
-#else
-#define DBG(x...)
-#endif
-
-#define PCI_ACCESS_READ 0
-#define PCI_ACCESS_WRITE 1
-
-int (*board_pci_idsel)(unsigned int devsel, int assert);
-
-void mod_wired_entry(int entry, unsigned long entrylo0,
- unsigned long entrylo1, unsigned long entryhi,
- unsigned long pagemask)
-{
- unsigned long old_pagemask;
- unsigned long old_ctx;
-
- /* Save old context and create impossible VPN2 value */
- old_ctx = read_c0_entryhi() & 0xff;
- old_pagemask = read_c0_pagemask();
- write_c0_index(entry);
- write_c0_pagemask(pagemask);
- write_c0_entryhi(entryhi);
- write_c0_entrylo0(entrylo0);
- write_c0_entrylo1(entrylo1);
- tlb_write_indexed();
- write_c0_entryhi(old_ctx);
- write_c0_pagemask(old_pagemask);
-}
-
-static struct vm_struct *pci_cfg_vm;
-static int pci_cfg_wired_entry;
-static unsigned long last_entryLo0, last_entryLo1;
-
-/*
- * We can't ioremap the entire pci config space because it's too large.
- * Nor can we call ioremap dynamically because some device drivers use
- * the PCI config routines from within interrupt handlers and that
- * becomes a problem in get_vm_area(). We use one wired TLB to handle
- * all config accesses for all busses.
- */
-void __init au1x_pci_cfg_init(void)
-{
- /* Reserve a wired entry for PCI config accesses */
- pci_cfg_vm = get_vm_area(0x2000, VM_IOREMAP);
- if (!pci_cfg_vm)
- panic(KERN_ERR "PCI unable to get vm area\n");
- pci_cfg_wired_entry = read_c0_wired();
- add_wired_entry(0, 0, (unsigned long)pci_cfg_vm->addr, PM_4K);
- last_entryLo0 = last_entryLo1 = 0xffffffff;
-}
-
-static int config_access(unsigned char access_type, struct pci_bus *bus,
- unsigned int dev_fn, unsigned char where, u32 *data)
-{
-#if defined(CONFIG_SOC_AU1500) || defined(CONFIG_SOC_AU1550)
- unsigned int device = PCI_SLOT(dev_fn);
- unsigned int function = PCI_FUNC(dev_fn);
- unsigned long offset, status;
- unsigned long cfg_base;
- unsigned long flags;
- int error = PCIBIOS_SUCCESSFUL;
- unsigned long entryLo0, entryLo1;
-
- if (device > 19) {
- *data = 0xffffffff;
- return -1;
- }
-
- local_irq_save(flags);
- au_writel(((0x2000 << 16) | (au_readl(Au1500_PCI_STATCMD) & 0xffff)),
- Au1500_PCI_STATCMD);
- au_sync_udelay(1);
-
- /*
- * Allow board vendors to implement their own off-chip IDSEL.
- * If it doesn't succeed, may as well bail out at this point.
- */
- if (board_pci_idsel && board_pci_idsel(device, 1) == 0) {
- *data = 0xffffffff;
- local_irq_restore(flags);
- return -1;
- }
-
- /* Setup the config window */
- if (bus->number == 0)
- cfg_base = (1 << device) << 11;
- else
- cfg_base = 0x80000000 | (bus->number << 16) | (device << 11);
-
- /* Setup the lower bits of the 36-bit address */
- offset = (function << 8) | (where & ~0x3);
- /* Pick up any address that falls below the page mask */
- offset |= cfg_base & ~PAGE_MASK;
-
- /* Page boundary */
- cfg_base = cfg_base & PAGE_MASK;
-
- /*
- * To improve performance, if the current device is the same as
- * the last device accessed, we don't touch the TLB.
- */
- entryLo0 = (6 << 26) | (cfg_base >> 6) | (2 << 3) | 7;
- entryLo1 = (6 << 26) | (cfg_base >> 6) | (0x1000 >> 6) | (2 << 3) | 7;
- if ((entryLo0 != last_entryLo0) || (entryLo1 != last_entryLo1)) {
- mod_wired_entry(pci_cfg_wired_entry, entryLo0, entryLo1,
- (unsigned long)pci_cfg_vm->addr, PM_4K);
- last_entryLo0 = entryLo0;
- last_entryLo1 = entryLo1;
- }
-
- if (access_type == PCI_ACCESS_WRITE)
- au_writel(*data, (int)(pci_cfg_vm->addr + offset));
- else
- *data = au_readl((int)(pci_cfg_vm->addr + offset));
-
- au_sync_udelay(2);
-
- DBG("cfg_access %d bus->number %u dev %u at %x *data %x conf %lx\n",
- access_type, bus->number, device, where, *data, offset);
-
- /* Check master abort */
- status = au_readl(Au1500_PCI_STATCMD);
-
- if (status & (1 << 29)) {
- *data = 0xffffffff;
- error = -1;
- DBG("Au1x Master Abort\n");
- } else if ((status >> 28) & 0xf) {
- DBG("PCI ERR detected: device %u, status %lx\n",
- device, (status >> 28) & 0xf);
-
- /* Clear errors */
- au_writel(status & 0xf000ffff, Au1500_PCI_STATCMD);
-
- *data = 0xffffffff;
- error = -1;
- }
-
- /* Take away the IDSEL. */
- if (board_pci_idsel)
- (void)board_pci_idsel(device, 0);
-
- local_irq_restore(flags);
- return error;
-#endif
-}
-
-static int read_config_byte(struct pci_bus *bus, unsigned int devfn,
- int where, u8 *val)
-{
- u32 data;
- int ret;
-
- ret = config_access(PCI_ACCESS_READ, bus, devfn, where, &data);
- if (where & 1)
- data >>= 8;
- if (where & 2)
- data >>= 16;
- *val = data & 0xff;
- return ret;
-}
-
-static int read_config_word(struct pci_bus *bus, unsigned int devfn,
- int where, u16 *val)
-{
- u32 data;
- int ret;
-
- ret = config_access(PCI_ACCESS_READ, bus, devfn, where, &data);
- if (where & 2)
- data >>= 16;
- *val = data & 0xffff;
- return ret;
-}
-
-static int read_config_dword(struct pci_bus *bus, unsigned int devfn,
- int where, u32 *val)
-{
- int ret;
-
- ret = config_access(PCI_ACCESS_READ, bus, devfn, where, val);
- return ret;
-}
-
-static int write_config_byte(struct pci_bus *bus, unsigned int devfn,
- int where, u8 val)
-{
- u32 data = 0;
-
- if (config_access(PCI_ACCESS_READ, bus, devfn, where, &data))
- return -1;
-
- data = (data & ~(0xff << ((where & 3) << 3))) |
- (val << ((where & 3) << 3));
-
- if (config_access(PCI_ACCESS_WRITE, bus, devfn, where, &data))
- return -1;
-
- return PCIBIOS_SUCCESSFUL;
-}
-
-static int write_config_word(struct pci_bus *bus, unsigned int devfn,
- int where, u16 val)
-{
- u32 data = 0;
-
- if (config_access(PCI_ACCESS_READ, bus, devfn, where, &data))
- return -1;
-
- data = (data & ~(0xffff << ((where & 3) << 3))) |
- (val << ((where & 3) << 3));
-
- if (config_access(PCI_ACCESS_WRITE, bus, devfn, where, &data))
- return -1;
-
- return PCIBIOS_SUCCESSFUL;
-}
-
-static int write_config_dword(struct pci_bus *bus, unsigned int devfn,
- int where, u32 val)
-{
- if (config_access(PCI_ACCESS_WRITE, bus, devfn, where, &val))
- return -1;
-
- return PCIBIOS_SUCCESSFUL;
-}
-
-static int config_read(struct pci_bus *bus, unsigned int devfn,
- int where, int size, u32 *val)
-{
- switch (size) {
- case 1: {
- u8 _val;
- int rc = read_config_byte(bus, devfn, where, &_val);
-
- *val = _val;
- return rc;
- }
- case 2: {
- u16 _val;
- int rc = read_config_word(bus, devfn, where, &_val);
-
- *val = _val;
- return rc;
- }
- default:
- return read_config_dword(bus, devfn, where, val);
- }
-}
-
-static int config_write(struct pci_bus *bus, unsigned int devfn,
- int where, int size, u32 val)
-{
- switch (size) {
- case 1:
- return write_config_byte(bus, devfn, where, (u8) val);
- case 2:
- return write_config_word(bus, devfn, where, (u16) val);
- default:
- return write_config_dword(bus, devfn, where, val);
- }
-}
-
-struct pci_ops au1x_pci_ops = {
- config_read,
- config_write
-};
diff --git a/arch/mips/pci/pci-alchemy.c b/arch/mips/pci/pci-alchemy.c
new file mode 100644
index 0000000..4ee5710
--- /dev/null
+++ b/arch/mips/pci/pci-alchemy.c
@@ -0,0 +1,516 @@
+/*
+ * Alchemy PCI host mode support.
+ *
+ * Copyright 2001-2003, 2007-2008 MontaVista Software Inc.
+ * Author: MontaVista Software, Inc. <source@mvista.com>
+ *
+ * Support for all devices (greater than 16) added by David Gathright.
+ */
+
+#include <linux/types.h>
+#include <linux/pci.h>
+#include <linux/platform_device.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/vmalloc.h>
+
+#include <asm/mach-au1x00/au1000.h>
+
+#ifdef CONFIG_DEBUG_PCI
+#define DBG(x...) printk(KERN_DEBUG x)
+#else
+#define DBG(x...) do {} while (0)
+#endif
+
+#define PCI_ACCESS_READ 0
+#define PCI_ACCESS_WRITE 1
+
+struct alchemy_pci_context {
+ struct pci_controller alchemy_pci_ctrl; /* leave as first member! */
+ void __iomem *regs; /* ctrl base */
+ /* tools for wired entry for config space access */
+ unsigned long last_elo0;
+ unsigned long last_elo1;
+ int wired_entry;
+ struct vm_struct *pci_cfg_vm;
+
+ unsigned long pm[12];
+
+ int (*board_map_irq)(const struct pci_dev *d, u8 slot, u8 pin);
+ int (*board_pci_idsel)(unsigned int devsel, int assert);
+};
+
+/* IO/MEM resources for PCI. Keep the memres in sync with __fixup_bigphys_addr
+ * in arch/mips/alchemy/common/setup.c
+ */
+static struct resource alchemy_pci_def_memres = {
+ .start = ALCHEMY_PCI_MEMWIN_START,
+ .end = ALCHEMY_PCI_MEMWIN_END,
+ .name = "PCI memory space",
+ .flags = IORESOURCE_MEM
+};
+
+static struct resource alchemy_pci_def_iores = {
+ .start = ALCHEMY_PCI_IOWIN_START,
+ .end = ALCHEMY_PCI_IOWIN_END,
+ .name = "PCI IO space",
+ .flags = IORESOURCE_IO
+};
+
+static void mod_wired_entry(int entry, unsigned long entrylo0,
+ unsigned long entrylo1, unsigned long entryhi,
+ unsigned long pagemask)
+{
+ unsigned long old_pagemask;
+ unsigned long old_ctx;
+
+ /* Save old context and create impossible VPN2 value */
+ old_ctx = read_c0_entryhi() & 0xff;
+ old_pagemask = read_c0_pagemask();
+ write_c0_index(entry);
+ write_c0_pagemask(pagemask);
+ write_c0_entryhi(entryhi);
+ write_c0_entrylo0(entrylo0);
+ write_c0_entrylo1(entrylo1);
+ tlb_write_indexed();
+ write_c0_entryhi(old_ctx);
+ write_c0_pagemask(old_pagemask);
+}
+
+static void alchemy_pci_wired_entry(struct alchemy_pci_context *ctx)
+{
+ ctx->wired_entry = read_c0_wired();
+ add_wired_entry(0, 0, (unsigned long)ctx->pci_cfg_vm->addr, PM_4K);
+ ctx->last_elo0 = ctx->last_elo1 = ~0;
+}
+
+static int config_access(unsigned char access_type, struct pci_bus *bus,
+ unsigned int dev_fn, unsigned char where, u32 *data)
+{
+ struct alchemy_pci_context *ctx = bus->sysdata;
+ unsigned int device = PCI_SLOT(dev_fn);
+ unsigned int function = PCI_FUNC(dev_fn);
+ unsigned long offset, status, cfg_base, flags, entryLo0, entryLo1, r;
+ int error = PCIBIOS_SUCCESSFUL;
+
+ if (device > 19) {
+ *data = 0xffffffff;
+ return -1;
+ }
+
+ /* YAMON on all db1xxx boards wipes the TLB and writes zero to C0_wired
+ * on resume, clearing our wired entry. Unfortunately the ->resume()
+ * callback is called way way way too late (and ->suspend() too early)
+ * to have them destroy and recreate it. Instead just test if c0_wired
+ * is now lower than the index we retrieved before suspending and then
+ * recreate the entry if necessary. Of course this is totally bonkers
+ * and breaks as soon as someone else adds another wired entry somewhere
+ * else. Anyone have any ideas how to handle this better?
+ */
+ if (unlikely(read_c0_wired() < ctx->wired_entry))
+ alchemy_pci_wired_entry(ctx);
+
+ local_irq_save(flags);
+ r = __raw_readl(ctx->regs + PCI_REG_STATCMD) & 0x0000ffff;
+ r |= PCI_STATCMD_STATUS(0x2000);
+ __raw_writel(r, ctx->regs + PCI_REG_STATCMD);
+ wmb();
+
+ /* Allow board vendors to implement their own off-chip IDSEL.
+ * If it doesn't succeed, may as well bail out at this point.
+ */
+ if (ctx->board_pci_idsel(device, 1) == 0) {
+ *data = 0xffffffff;
+ local_irq_restore(flags);
+ return -1;
+ }
+
+ /* Setup the config window */
+ if (bus->number == 0)
+ cfg_base = (1 << device) << 11;
+ else
+ cfg_base = 0x80000000 | (bus->number << 16) | (device << 11);
+
+ /* Setup the lower bits of the 36-bit address */
+ offset = (function << 8) | (where & ~0x3);
+ /* Pick up any address that falls below the page mask */
+ offset |= cfg_base & ~PAGE_MASK;
+
+ /* Page boundary */
+ cfg_base = cfg_base & PAGE_MASK;
+
+ /* To improve performance, if the current device is the same as
+ * the last device accessed, we don't touch the TLB.
+ */
+ entryLo0 = (6 << 26) | (cfg_base >> 6) | (2 << 3) | 7;
+ entryLo1 = (6 << 26) | (cfg_base >> 6) | (0x1000 >> 6) | (2 << 3) | 7;
+ if ((entryLo0 != ctx->last_elo0) || (entryLo1 != ctx->last_elo1)) {
+ mod_wired_entry(ctx->wired_entry, entryLo0, entryLo1,
+ (unsigned long)ctx->pci_cfg_vm->addr, PM_4K);
+ ctx->last_elo0 = entryLo0;
+ ctx->last_elo1 = entryLo1;
+ }
+
+ if (access_type == PCI_ACCESS_WRITE)
+ __raw_writel(*data, ctx->pci_cfg_vm->addr + offset);
+ else
+ *data = __raw_readl(ctx->pci_cfg_vm->addr + offset);
+ wmb();
+
+ DBG("alchemy-pci: cfg access %d bus %u dev %u at %x dat %x conf %lx\n",
+ access_type, bus->number, device, where, *data, offset);
+
+ /* check for errors, master abort */
+ status = __raw_readl(ctx->regs + PCI_REG_STATCMD);
+ if (status & (1 << 29)) {
+ *data = 0xffffffff;
+ error = -1;
+ DBG("alchemy-pci: master abort on cfg access %d bus %d dev %d",
+ access_type, bus->number, device);
+ } else if ((status >> 28) & 0xf) {
+ DBG("alchemy-pci: PCI ERR detected: dev %d, status %lx\n",
+ device, (status >> 28) & 0xf);
+
+ /* clear errors */
+ __raw_writel(status & 0xf000ffff, ctx->regs + PCI_REG_STATCMD);
+
+ *data = 0xffffffff;
+ error = -1;
+ }
+
+ /* Take away the IDSEL. */
+ (void)ctx->board_pci_idsel(device, 0);
+
+ local_irq_restore(flags);
+ return error;
+}
+
+static int read_config_byte(struct pci_bus *bus, unsigned int devfn,
+ int where, u8 *val)
+{
+ u32 data;
+ int ret = config_access(PCI_ACCESS_READ, bus, devfn, where, &data);
+
+ if (where & 1)
+ data >>= 8;
+ if (where & 2)
+ data >>= 16;
+ *val = data & 0xff;
+ return ret;
+}
+
+static int read_config_word(struct pci_bus *bus, unsigned int devfn,
+ int where, u16 *val)
+{
+ u32 data;
+ int ret = config_access(PCI_ACCESS_READ, bus, devfn, where, &data);
+
+ if (where & 2)
+ data >>= 16;
+ *val = data & 0xffff;
+ return ret;
+}
+
+static int read_config_dword(struct pci_bus *bus, unsigned int devfn,
+ int where, u32 *val)
+{
+ return config_access(PCI_ACCESS_READ, bus, devfn, where, val);
+}
+
+static int write_config_byte(struct pci_bus *bus, unsigned int devfn,
+ int where, u8 val)
+{
+ u32 data = 0;
+
+ if (config_access(PCI_ACCESS_READ, bus, devfn, where, &data))
+ return -1;
+
+ data = (data & ~(0xff << ((where & 3) << 3))) |
+ (val << ((where & 3) << 3));
+
+ if (config_access(PCI_ACCESS_WRITE, bus, devfn, where, &data))
+ return -1;
+
+ return PCIBIOS_SUCCESSFUL;
+}
+
+static int write_config_word(struct pci_bus *bus, unsigned int devfn,
+ int where, u16 val)
+{
+ u32 data = 0;
+
+ if (config_access(PCI_ACCESS_READ, bus, devfn, where, &data))
+ return -1;
+
+ data = (data & ~(0xffff << ((where & 3) << 3))) |
+ (val << ((where & 3) << 3));
+
+ if (config_access(PCI_ACCESS_WRITE, bus, devfn, where, &data))
+ return -1;
+
+ return PCIBIOS_SUCCESSFUL;
+}
+
+static int write_config_dword(struct pci_bus *bus, unsigned int devfn,
+ int where, u32 val)
+{
+ return config_access(PCI_ACCESS_WRITE, bus, devfn, where, &val);
+}
+
+static int alchemy_pci_read(struct pci_bus *bus, unsigned int devfn,
+ int where, int size, u32 *val)
+{
+ switch (size) {
+ case 1: {
+ u8 _val;
+ int rc = read_config_byte(bus, devfn, where, &_val);
+
+ *val = _val;
+ return rc;
+ }
+ case 2: {
+ u16 _val;
+ int rc = read_config_word(bus, devfn, where, &_val);
+
+ *val = _val;
+ return rc;
+ }
+ default:
+ return read_config_dword(bus, devfn, where, val);
+ }
+}
+
+static int alchemy_pci_write(struct pci_bus *bus, unsigned int devfn,
+ int where, int size, u32 val)
+{
+ switch (size) {
+ case 1:
+ return write_config_byte(bus, devfn, where, (u8) val);
+ case 2:
+ return write_config_word(bus, devfn, where, (u16) val);
+ default:
+ return write_config_dword(bus, devfn, where, val);
+ }
+}
+
+static struct pci_ops alchemy_pci_ops = {
+ .read = alchemy_pci_read,
+ .write = alchemy_pci_write,
+};
+
+static int alchemy_pci_def_idsel(unsigned int devsel, int assert)
+{
+ return 1; /* success */
+}
+
+static int __devinit alchemy_pci_probe(struct platform_device *pdev)
+{
+ struct alchemy_pci_platdata *pd = pdev->dev.platform_data;
+ struct alchemy_pci_context *ctx;
+ void __iomem *virt_io;
+ unsigned long val;
+ struct resource *r;
+ int ret;
+
+ /* need at least PCI IRQ mapping table */
+ if (!pd) {
+ dev_err(&pdev->dev, "need platform data for PCI setup\n");
+ ret = -ENODEV;
+ goto out;
+ }
+
+ ctx = kzalloc(sizeof(*ctx), GFP_KERNEL);
+ if (!ctx) {
+ dev_err(&pdev->dev, "no memory for pcictl context\n");
+ ret = -ENOMEM;
+ goto out;
+ }
+
+ r = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ if (!r) {
+ dev_err(&pdev->dev, "no pcictl ctrl regs resource\n");
+ ret = -ENODEV;
+ goto out1;
+ }
+
+ if (!request_mem_region(r->start, resource_size(r), pdev->name)) {
+ dev_err(&pdev->dev, "cannot claim pci regs\n");
+ ret = -ENODEV;
+ goto out1;
+ }
+
+ ctx->regs = ioremap_nocache(r->start, resource_size(r));
+ if (!ctx->regs) {
+ dev_err(&pdev->dev, "cannot map pci regs\n");
+ ret = -ENODEV;
+ goto out2;
+ }
+
+ /* map parts of the PCI IO area */
+ /* REVISIT: if this changes with a newer variant (doubt it) make this
+ * a platform resource.
+ */
+ virt_io = ioremap(AU1500_PCI_IO_PHYS_ADDR, 0x00100000);
+ if (!virt_io) {
+ dev_err(&pdev->dev, "cannot remap pci io space\n");
+ ret = -ENODEV;
+ goto out3;
+ }
+ ctx->alchemy_pci_ctrl.io_map_base = (unsigned long)virt_io;
+
+#ifdef CONFIG_DMA_NONCOHERENT
+ /* Au1500 revisions older than AD have borked coherent PCI */
+ if ((alchemy_get_cputype() == ALCHEMY_CPU_AU1500) &&
+ (read_c0_prid() < 0x01030202)) {
+ val = __raw_readl(ctx->regs + PCI_REG_CONFIG);
+ val |= PCI_CONFIG_NC;
+ __raw_writel(val, ctx->regs + PCI_REG_CONFIG);
+ wmb();
+ dev_info(&pdev->dev, "non-coherent PCI on Au1500 AA/AB/AC\n");
+ }
+#endif
+
+ if (pd->board_map_irq)
+ ctx->board_map_irq = pd->board_map_irq;
+
+ if (pd->board_pci_idsel)
+ ctx->board_pci_idsel = pd->board_pci_idsel;
+ else
+ ctx->board_pci_idsel = alchemy_pci_def_idsel;
+
+ /* fill in relevant pci_controller members */
+ ctx->alchemy_pci_ctrl.pci_ops = &alchemy_pci_ops;
+ ctx->alchemy_pci_ctrl.mem_resource = &alchemy_pci_def_memres;
+ ctx->alchemy_pci_ctrl.io_resource = &alchemy_pci_def_iores;
+
+ /* we can't ioremap the entire pci config space because it's too large,
+ * nor can we dynamically ioremap it because some drivers use the
+ * PCI config routines from within atomic contex and that becomes a
+ * problem in get_vm_area(). Instead we use one wired TLB entry to
+ * handle all config accesses for all busses.
+ */
+ ctx->pci_cfg_vm = get_vm_area(0x2000, VM_IOREMAP);
+ if (!ctx->pci_cfg_vm) {
+ dev_err(&pdev->dev, "unable to get vm area\n");
+ ret = -ENOMEM;
+ goto out4;
+ }
+ ctx->wired_entry = 8192; /* impossibly high value */
+
+ set_io_port_base((unsigned long)ctx->alchemy_pci_ctrl.io_map_base);
+
+ /* board may want to modify bits in the config register, do it now */
+ val = __raw_readl(ctx->regs + PCI_REG_CONFIG);
+ val &= ~pd->pci_cfg_clr;
+ val |= pd->pci_cfg_set;
+ val &= ~PCI_CONFIG_PD; /* clear disable bit */
+ __raw_writel(val, ctx->regs + PCI_REG_CONFIG);
+ wmb();
+
+ platform_set_drvdata(pdev, ctx);
+ register_pci_controller(&ctx->alchemy_pci_ctrl);
+
+ return 0;
+
+out4:
+ iounmap(virt_io);
+out3:
+ iounmap(ctx->regs);
+out2:
+ release_mem_region(r->start, resource_size(r));
+out1:
+ kfree(ctx);
+out:
+ return ret;
+}
+
+
+#ifdef CONFIG_PM
+/* save PCI controller register contents. */
+static int alchemy_pci_suspend(struct device *dev)
+{
+ struct alchemy_pci_context *ctx = dev_get_drvdata(dev);
+
+ ctx->pm[0] = __raw_readl(ctx->regs + PCI_REG_CMEM);
+ ctx->pm[1] = __raw_readl(ctx->regs + PCI_REG_CONFIG) & 0x0009ffff;
+ ctx->pm[2] = __raw_readl(ctx->regs + PCI_REG_B2BMASK_CCH);
+ ctx->pm[3] = __raw_readl(ctx->regs + PCI_REG_B2BBASE0_VID);
+ ctx->pm[4] = __raw_readl(ctx->regs + PCI_REG_B2BBASE1_SID);
+ ctx->pm[5] = __raw_readl(ctx->regs + PCI_REG_MWMASK_DEV);
+ ctx->pm[6] = __raw_readl(ctx->regs + PCI_REG_MWBASE_REV_CCL);
+ ctx->pm[7] = __raw_readl(ctx->regs + PCI_REG_ID);
+ ctx->pm[8] = __raw_readl(ctx->regs + PCI_REG_CLASSREV);
+ ctx->pm[9] = __raw_readl(ctx->regs + PCI_REG_PARAM);
+ ctx->pm[10] = __raw_readl(ctx->regs + PCI_REG_MBAR);
+ ctx->pm[11] = __raw_readl(ctx->regs + PCI_REG_TIMEOUT);
+
+ return 0;
+}
+
+static int alchemy_pci_resume(struct device *dev)
+{
+ struct alchemy_pci_context *ctx = dev_get_drvdata(dev);
+
+ __raw_writel(ctx->pm[0], ctx->regs + PCI_REG_CMEM);
+ __raw_writel(ctx->pm[2], ctx->regs + PCI_REG_B2BMASK_CCH);
+ __raw_writel(ctx->pm[3], ctx->regs + PCI_REG_B2BBASE0_VID);
+ __raw_writel(ctx->pm[4], ctx->regs + PCI_REG_B2BBASE1_SID);
+ __raw_writel(ctx->pm[5], ctx->regs + PCI_REG_MWMASK_DEV);
+ __raw_writel(ctx->pm[6], ctx->regs + PCI_REG_MWBASE_REV_CCL);
+ __raw_writel(ctx->pm[7], ctx->regs + PCI_REG_ID);
+ __raw_writel(ctx->pm[8], ctx->regs + PCI_REG_CLASSREV);
+ __raw_writel(ctx->pm[9], ctx->regs + PCI_REG_PARAM);
+ __raw_writel(ctx->pm[10], ctx->regs + PCI_REG_MBAR);
+ __raw_writel(ctx->pm[11], ctx->regs + PCI_REG_TIMEOUT);
+ wmb();
+ __raw_writel(ctx->pm[1], ctx->regs + PCI_REG_CONFIG);
+ wmb();
+
+ return 0;
+}
+
+static const struct dev_pm_ops alchemy_pci_pmops = {
+ .suspend = alchemy_pci_suspend,
+ .resume = alchemy_pci_resume,
+};
+
+#define ALCHEMY_PCICTL_PM (&alchemy_pci_pmops)
+
+#else
+#define ALCHEMY_PCICTL_PM NULL
+#endif
+
+static struct platform_driver alchemy_pcictl_driver = {
+ .probe = alchemy_pci_probe,
+ .driver = {
+ .name = "alchemy-pci",
+ .owner = THIS_MODULE,
+ .pm = ALCHEMY_PCICTL_PM,
+ },
+};
+
+static int __init alchemy_pci_init(void)
+{
+ /* Au1500/Au1550 have PCI */
+ switch (alchemy_get_cputype()) {
+ case ALCHEMY_CPU_AU1500:
+ case ALCHEMY_CPU_AU1550:
+ return platform_driver_register(&alchemy_pcictl_driver);
+ }
+ return 0;
+}
+arch_initcall(alchemy_pci_init);
+
+
+int __init pcibios_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
+{
+ struct alchemy_pci_context *ctx = dev->sysdata;
+ if (ctx && ctx->board_map_irq)
+ return ctx->board_map_irq(dev, slot, pin);
+ return -1;
+}
+
+int pcibios_plat_dev_init(struct pci_dev *dev)
+{
+ return 0;
+}
diff --git a/arch/mips/pmc-sierra/msp71xx/msp_setup.c b/arch/mips/pmc-sierra/msp71xx/msp_setup.c
index 0abfbe0..655308a 100644
--- a/arch/mips/pmc-sierra/msp71xx/msp_setup.c
+++ b/arch/mips/pmc-sierra/msp71xx/msp_setup.c
@@ -14,6 +14,7 @@
#include <asm/cacheflush.h>
#include <asm/r4kcache.h>
#include <asm/reboot.h>
+#include <asm/smp-ops.h>
#include <asm/time.h>
#include <msp_prom.h>
diff --git a/arch/mips/pmc-sierra/yosemite/py-console.c b/arch/mips/pmc-sierra/yosemite/py-console.c
index 434d7b1..b7f1d9c 100644
--- a/arch/mips/pmc-sierra/yosemite/py-console.c
+++ b/arch/mips/pmc-sierra/yosemite/py-console.c
@@ -65,15 +65,11 @@ static unsigned char readb_outer_space(unsigned long long phys)
__asm__ __volatile__ (
" .set mips3 \n"
- " .set push \n"
- " .set noreorder \n"
- " .set nomacro \n"
" ld %0, %1 \n"
- " .set pop \n"
" lbu %0, (%0) \n"
" .set mips0 \n"
: "=r" (res)
- : "R" (vaddr));
+ : "m" (vaddr));
write_c0_status(sr);
ssnop_4();
@@ -93,15 +89,11 @@ static void writeb_outer_space(unsigned long long phys, unsigned char c)
__asm__ __volatile__ (
" .set mips3 \n"
- " .set push \n"
- " .set noreorder \n"
- " .set nomacro \n"
" ld %0, %1 \n"
- " .set pop \n"
" sb %2, (%0) \n"
" .set mips0 \n"
: "=&r" (tmp)
- : "R" (vaddr), "r" (c));
+ : "m" (vaddr), "r" (c));
write_c0_status(sr);
ssnop_4();
diff --git a/arch/mips/pnx8550/common/prom.c b/arch/mips/pnx8550/common/prom.c
index 32f7009..49639e8 100644
--- a/arch/mips/pnx8550/common/prom.c
+++ b/arch/mips/pnx8550/common/prom.c
@@ -30,7 +30,7 @@ typedef struct
}t_env_var;
-char * prom_getcmdline(void)
+char * __init prom_getcmdline(void)
{
return &(arcs_cmdline[0]);
}
diff --git a/arch/mips/sgi-ip27/ip27-irq.c b/arch/mips/sgi-ip27/ip27-irq.c
index b18b04e..f90dce3 100644
--- a/arch/mips/sgi-ip27/ip27-irq.c
+++ b/arch/mips/sgi-ip27/ip27-irq.c
@@ -337,12 +337,12 @@ static struct irq_chip bridge_irq_type = {
.irq_unmask = enable_bridge_irq,
};
-void __devinit register_bridge_irq(unsigned int irq)
+void register_bridge_irq(unsigned int irq)
{
irq_set_chip_and_handler(irq, &bridge_irq_type, handle_level_irq);
}
-int __devinit request_bridge_irq(struct bridge_controller *bc)
+int request_bridge_irq(struct bridge_controller *bc)
{
int irq = allocate_irqno();
int swlevel, cpu;
OpenPOWER on IntegriCloud