diff options
| author | Jason Wessel <jason.wessel@windriver.com> | 2008-07-29 15:58:52 -0500 |
|---|---|---|
| committer | Ralf Baechle <ralf@linux-mips.org> | 2008-07-30 21:54:42 +0100 |
| commit | 8d60a903d986ffa26c41f0092320a3b9da20bfaf (patch) | |
| tree | f05a8ae48e275d55fcfd3acfb7b3b1b601da56ea /arch/mips | |
| parent | 8f8da9adebdf04bfb3b812a7de8706fbf179fd2c (diff) | |
| download | op-kernel-dev-8d60a903d986ffa26c41f0092320a3b9da20bfaf.zip op-kernel-dev-8d60a903d986ffa26c41f0092320a3b9da20bfaf.tar.gz | |
[MIPS] kgdb: Remove existing implementation
This patch explicitly removes the kgdb implementation, for mips which
is intended to be followed by a patch that adds a kgdb implementation
for MIPS that makes use of the kgdb core in the kernel.
Signed-off-by: Jason Wessel <jason.wessel@windriver.com>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Diffstat (limited to 'arch/mips')
58 files changed, 4 insertions, 2919 deletions
diff --git a/arch/mips/Kconfig b/arch/mips/Kconfig index b4c4eaa..34b13f1 100644 --- a/arch/mips/Kconfig +++ b/arch/mips/Kconfig @@ -34,7 +34,6 @@ config BASLER_EXCITE select SYS_HAS_CPU_RM9000 select SYS_SUPPORTS_32BIT_KERNEL select SYS_SUPPORTS_BIG_ENDIAN - select SYS_SUPPORTS_KGDB help The eXcite is a smart camera platform manufactured by Basler Vision Technologies AG. @@ -280,7 +279,6 @@ config PMC_MSP select SYS_HAS_CPU_MIPS32_R2 select SYS_SUPPORTS_32BIT_KERNEL select SYS_SUPPORTS_BIG_ENDIAN - select SYS_SUPPORTS_KGDB select IRQ_CPU select SERIAL_8250 select SERIAL_8250_CONSOLE @@ -306,7 +304,6 @@ config PMC_YOSEMITE select SYS_SUPPORTS_64BIT_KERNEL select SYS_SUPPORTS_BIG_ENDIAN select SYS_SUPPORTS_HIGHMEM - select SYS_SUPPORTS_KGDB select SYS_SUPPORTS_SMP help Yosemite is an evaluation board for the RM9000x2 processor @@ -359,7 +356,6 @@ config SGI_IP27 select SYS_HAS_CPU_R10000 select SYS_SUPPORTS_64BIT_KERNEL select SYS_SUPPORTS_BIG_ENDIAN - select SYS_SUPPORTS_KGDB select SYS_SUPPORTS_NUMA select SYS_SUPPORTS_SMP select GENERIC_HARDIRQS_NO__DO_IRQ @@ -475,7 +471,6 @@ config SIBYTE_SWARM select SYS_HAS_CPU_SB1 select SYS_SUPPORTS_BIG_ENDIAN select SYS_SUPPORTS_HIGHMEM - select SYS_SUPPORTS_KGDB select SYS_SUPPORTS_LITTLE_ENDIAN select ZONE_DMA32 if 64BIT @@ -868,7 +863,6 @@ config SOC_PNX8550 select SYS_HAS_EARLY_PRINTK select SYS_SUPPORTS_32BIT_KERNEL select GENERIC_HARDIRQS_NO__DO_IRQ - select SYS_SUPPORTS_KGDB select GENERIC_GPIO config SWAP_IO_SPACE diff --git a/arch/mips/Kconfig.debug b/arch/mips/Kconfig.debug index f18cf92..765c8e2 100644 --- a/arch/mips/Kconfig.debug +++ b/arch/mips/Kconfig.debug @@ -34,28 +34,6 @@ config SMTC_IDLE_HOOK_DEBUG arch/mips/kernel/smtc.c. This debugging option result in significant overhead so should be disabled in production kernels. -config KGDB - bool "Remote GDB kernel debugging" - depends on DEBUG_KERNEL && SYS_SUPPORTS_KGDB - select DEBUG_INFO - help - If you say Y here, it will be possible to remotely debug the MIPS - kernel using gdb. This enlarges your kernel image disk size by - several megabytes and requires a machine with more than 16 MB, - better 32 MB RAM to avoid excessive linking time. This is only - useful for kernel hackers. If unsure, say N. - -config SYS_SUPPORTS_KGDB - bool - -config GDB_CONSOLE - bool "Console output to GDB" - depends on KGDB - help - If you are using GDB for remote debugging over a serial port and - would like kernel messages to be formatted into GDB $O packets so - that GDB prints them as program output, say 'Y'. - config SB1XXX_CORELIS bool "Corelis Debugger" depends on SIBYTE_SB1xxx_SOC diff --git a/arch/mips/au1000/Kconfig b/arch/mips/au1000/Kconfig index 1fe97cc..e4a057d 100644 --- a/arch/mips/au1000/Kconfig +++ b/arch/mips/au1000/Kconfig @@ -134,4 +134,3 @@ config SOC_AU1X00 select SYS_HAS_CPU_MIPS32_R1 select SYS_SUPPORTS_32BIT_KERNEL select SYS_SUPPORTS_APM_EMULATION - select SYS_SUPPORTS_KGDB diff --git a/arch/mips/au1000/common/Makefile b/arch/mips/au1000/common/Makefile index dd0e19d..df48fd6 100644 --- a/arch/mips/au1000/common/Makefile +++ b/arch/mips/au1000/common/Makefile @@ -9,7 +9,6 @@ obj-y += prom.o irq.o puts.o time.o reset.o \ au1xxx_irqmap.o clocks.o platform.o power.o setup.o \ sleeper.o cputable.o dma.o dbdma.o gpio.o -obj-$(CONFIG_KGDB) += dbg_io.o obj-$(CONFIG_PCI) += pci.o EXTRA_CFLAGS += -Werror diff --git a/arch/mips/au1000/common/dbg_io.c b/arch/mips/au1000/common/dbg_io.c deleted file mode 100644 index af5be7d..0000000 --- a/arch/mips/au1000/common/dbg_io.c +++ /dev/null @@ -1,109 +0,0 @@ -#include <linux/types.h> - -#include <asm/mach-au1x00/au1000.h> - -#ifdef CONFIG_KGDB - -/* - * FIXME the user should be able to select the - * uart to be used for debugging. - */ -#define DEBUG_BASE UART_DEBUG_BASE - -#define UART16550_BAUD_2400 2400 -#define UART16550_BAUD_4800 4800 -#define UART16550_BAUD_9600 9600 -#define UART16550_BAUD_19200 19200 -#define UART16550_BAUD_38400 38400 -#define UART16550_BAUD_57600 57600 -#define UART16550_BAUD_115200 115200 - -#define UART16550_PARITY_NONE 0 -#define UART16550_PARITY_ODD 0x08 -#define UART16550_PARITY_EVEN 0x18 -#define UART16550_PARITY_MARK 0x28 -#define UART16550_PARITY_SPACE 0x38 - -#define UART16550_DATA_5BIT 0x0 -#define UART16550_DATA_6BIT 0x1 -#define UART16550_DATA_7BIT 0x2 -#define UART16550_DATA_8BIT 0x3 - -#define UART16550_STOP_1BIT 0x0 -#define UART16550_STOP_2BIT 0x4 - - -#define UART_RX 0 /* Receive buffer */ -#define UART_TX 4 /* Transmit buffer */ -#define UART_IER 8 /* Interrupt Enable Register */ -#define UART_IIR 0xC /* Interrupt ID Register */ -#define UART_FCR 0x10 /* FIFO Control Register */ -#define UART_LCR 0x14 /* Line Control Register */ -#define UART_MCR 0x18 /* Modem Control Register */ -#define UART_LSR 0x1C /* Line Status Register */ -#define UART_MSR 0x20 /* Modem Status Register */ -#define UART_CLK 0x28 /* Baud Rat4e Clock Divider */ -#define UART_MOD_CNTRL 0x100 /* Module Control */ - -/* memory-mapped read/write of the port */ -#define UART16550_READ(y) (au_readl(DEBUG_BASE + y) & 0xff) -#define UART16550_WRITE(y, z) (au_writel(z & 0xff, DEBUG_BASE + y)) - -extern unsigned long calc_clock(void); - -void debugInit(u32 baud, u8 data, u8 parity, u8 stop) -{ - if (UART16550_READ(UART_MOD_CNTRL) != 0x3) - UART16550_WRITE(UART_MOD_CNTRL, 3); - calc_clock(); - - /* disable interrupts */ - UART16550_WRITE(UART_IER, 0); - - /* set up baud rate */ - { - u32 divisor; - - /* set divisor */ - divisor = get_au1x00_uart_baud_base() / baud; - UART16550_WRITE(UART_CLK, divisor & 0xffff); - } - - /* set data format */ - UART16550_WRITE(UART_LCR, (data | parity | stop)); -} - -static int remoteDebugInitialized; - -u8 getDebugChar(void) -{ - if (!remoteDebugInitialized) { - remoteDebugInitialized = 1; - debugInit(UART16550_BAUD_115200, - UART16550_DATA_8BIT, - UART16550_PARITY_NONE, - UART16550_STOP_1BIT); - } - - while ((UART16550_READ(UART_LSR) & 0x1) == 0); - return UART16550_READ(UART_RX); -} - - -int putDebugChar(u8 byte) -{ - if (!remoteDebugInitialized) { - remoteDebugInitialized = 1; - debugInit(UART16550_BAUD_115200, - UART16550_DATA_8BIT, - UART16550_PARITY_NONE, - UART16550_STOP_1BIT); - } - - while ((UART16550_READ(UART_LSR) & 0x40) == 0); - UART16550_WRITE(UART_TX, byte); - - return 1; -} - -#endif diff --git a/arch/mips/basler/excite/Makefile b/arch/mips/basler/excite/Makefile index 519142c..cff29cf 100644 --- a/arch/mips/basler/excite/Makefile +++ b/arch/mips/basler/excite/Makefile @@ -5,5 +5,4 @@ obj-$(CONFIG_BASLER_EXCITE) += excite_irq.o excite_prom.o excite_setup.o \ excite_device.o excite_procfs.o -obj-$(CONFIG_KGDB) += excite_dbg_io.o obj-m += excite_iodev.o diff --git a/arch/mips/basler/excite/excite_dbg_io.c b/arch/mips/basler/excite/excite_dbg_io.c deleted file mode 100644 index d289e3a..0000000 --- a/arch/mips/basler/excite/excite_dbg_io.c +++ /dev/null @@ -1,121 +0,0 @@ -/* - * Copyright (C) 2004 by Basler Vision Technologies AG - * Author: Thomas Koeller <thomas.koeller@baslerweb.com> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - */ - -#include <linux/linkage.h> -#include <linux/init.h> -#include <linux/kernel.h> -#include <asm/gdb-stub.h> -#include <asm/rm9k-ocd.h> -#include <excite.h> - -#if defined(CONFIG_SERIAL_8250) && CONFIG_SERIAL_8250_NR_UARTS > 1 -#error Debug port used by serial driver -#endif - -#define UART_CLK 25000000 -#define BASE_BAUD (UART_CLK / 16) -#define REGISTER_BASE_0 0x0208UL -#define REGISTER_BASE_1 0x0238UL - -#define REGISTER_BASE_DBG REGISTER_BASE_1 - -#define CPRR 0x0004 -#define UACFG 0x0200 -#define UAINTS 0x0204 -#define UARBR (REGISTER_BASE_DBG + 0x0000) -#define UATHR (REGISTER_BASE_DBG + 0x0004) -#define UADLL (REGISTER_BASE_DBG + 0x0008) -#define UAIER (REGISTER_BASE_DBG + 0x000c) -#define UADLH (REGISTER_BASE_DBG + 0x0010) -#define UAIIR (REGISTER_BASE_DBG + 0x0014) -#define UAFCR (REGISTER_BASE_DBG + 0x0018) -#define UALCR (REGISTER_BASE_DBG + 0x001c) -#define UAMCR (REGISTER_BASE_DBG + 0x0020) -#define UALSR (REGISTER_BASE_DBG + 0x0024) -#define UAMSR (REGISTER_BASE_DBG + 0x0028) -#define UASCR (REGISTER_BASE_DBG + 0x002c) - -#define PARITY_NONE 0 -#define PARITY_ODD 0x08 -#define PARITY_EVEN 0x18 -#define PARITY_MARK 0x28 -#define PARITY_SPACE 0x38 - -#define DATA_5BIT 0x0 -#define DATA_6BIT 0x1 -#define DATA_7BIT 0x2 -#define DATA_8BIT 0x3 - -#define STOP_1BIT 0x0 -#define STOP_2BIT 0x4 - -#define BAUD_DBG 57600 -#define PARITY_DBG PARITY_NONE -#define DATA_DBG DATA_8BIT -#define STOP_DBG STOP_1BIT - -/* Initialize the serial port for KGDB debugging */ -void __init excite_kgdb_init(void) -{ - const u32 divisor = BASE_BAUD / BAUD_DBG; - - /* Take the UART out of reset */ - titan_writel(0x00ff1cff, CPRR); - titan_writel(0x00000000, UACFG); - titan_writel(0x00000002, UACFG); - - titan_writel(0x0, UALCR); - titan_writel(0x0, UAIER); - - /* Disable FIFOs */ - titan_writel(0x00, UAFCR); - - titan_writel(0x80, UALCR); - titan_writel(divisor & 0xff, UADLL); - titan_writel((divisor & 0xff00) >> 8, UADLH); - titan_writel(0x0, UALCR); - - titan_writel(DATA_DBG | PARITY_DBG | STOP_DBG, UALCR); - - /* Enable receiver interrupt */ - titan_readl(UARBR); - titan_writel(0x1, UAIER); -} - -int getDebugChar(void) -{ - while (!(titan_readl(UALSR) & 0x1)); - return titan_readl(UARBR); -} - -int putDebugChar(int data) -{ - while (!(titan_readl(UALSR) & 0x20)); - titan_writel(data, UATHR); - return 1; -} - -/* KGDB interrupt handler */ -asmlinkage void excite_kgdb_inthdl(void) -{ - if (unlikely( - ((titan_readl(UAIIR) & 0x7) == 4) - && ((titan_readl(UARBR) & 0xff) == 0x3))) - set_async_breakpoint(®s->cp0_epc); -} diff --git a/arch/mips/basler/excite/excite_irq.c b/arch/mips/basler/excite/excite_irq.c index 4903e06..934e0a6 100644 --- a/arch/mips/basler/excite/excite_irq.c +++ b/arch/mips/basler/excite/excite_irq.c @@ -50,10 +50,6 @@ void __init arch_init_irq(void) mips_cpu_irq_init(); rm7k_cpu_irq_init(); rm9k_cpu_irq_init(); - -#ifdef CONFIG_KGDB - excite_kgdb_init(); -#endif } asmlinkage void plat_irq_dispatch(void) @@ -90,9 +86,6 @@ asmlinkage void plat_irq_dispatch(void) msgint = msgintflags & msgintmask & (0x1 << (TITAN_MSGINT % 0x20)); if ((pending & (1 << TITAN_IRQ)) && msgint) { ocd_writel(msgint, INTP0Clear0 + (TITAN_MSGINT / 0x20 * 0x10)); -#if defined(CONFIG_KGDB) - excite_kgdb_inthdl(); -#endif do_IRQ(TITAN_IRQ); return; } diff --git a/arch/mips/basler/excite/excite_setup.c b/arch/mips/basler/excite/excite_setup.c index 6dd8f0d..d66b3b8 100644 --- a/arch/mips/basler/excite/excite_setup.c +++ b/arch/mips/basler/excite/excite_setup.c @@ -95,13 +95,13 @@ static int __init excite_init_console(void) /* Take the DUART out of reset */ titan_writel(0x00ff1cff, CPRR); -#if defined(CONFIG_KGDB) || (CONFIG_SERIAL_8250_NR_UARTS > 1) +#if (CONFIG_SERIAL_8250_NR_UARTS > 1) /* Enable both ports */ titan_writel(MASK_SER0 | MASK_SER1, UACFG); #else /* Enable port #0 only */ titan_writel(MASK_SER0, UACFG); -#endif /* defined(CONFIG_KGDB) */ +#endif /* * Set up serial port #0. Do not use autodetection; the result is diff --git a/arch/mips/configs/db1000_defconfig b/arch/mips/configs/db1000_defconfig index ebb8ad6..a279165 100644 --- a/arch/mips/configs/db1000_defconfig +++ b/arch/mips/configs/db1000_defconfig @@ -1092,7 +1092,6 @@ CONFIG_ENABLE_MUST_CHECK=y CONFIG_LOG_BUF_SHIFT=14 CONFIG_CROSSCOMPILE=y CONFIG_CMDLINE="" -CONFIG_SYS_SUPPORTS_KGDB=y # # Security options diff --git a/arch/mips/configs/db1100_defconfig b/arch/mips/configs/db1100_defconfig index ad4e5ef..8944d15 100644 --- a/arch/mips/configs/db1100_defconfig +++ b/arch/mips/configs/db1100_defconfig @@ -1092,7 +1092,6 @@ CONFIG_ENABLE_MUST_CHECK=y CONFIG_LOG_BUF_SHIFT=14 CONFIG_CROSSCOMPILE=y CONFIG_CMDLINE="" -CONFIG_SYS_SUPPORTS_KGDB=y # # Security options diff --git a/arch/mips/configs/db1200_defconfig b/arch/mips/configs/db1200_defconfig index d0dc2e8..ab17973 100644 --- a/arch/mips/configs/db1200_defconfig +++ b/arch/mips/configs/db1200_defconfig @@ -1174,7 +1174,6 @@ CONFIG_ENABLE_MUST_CHECK=y CONFIG_LOG_BUF_SHIFT=14 CONFIG_CROSSCOMPILE=y CONFIG_CMDLINE="mem=48M" -CONFIG_SYS_SUPPORTS_KGDB=y # # Security options diff --git a/arch/mips/configs/db1500_defconfig b/arch/mips/configs/db1500_defconfig index 9155082..b65803f 100644 --- a/arch/mips/configs/db1500_defconfig +++ b/arch/mips/configs/db1500_defconfig @@ -1392,7 +1392,6 @@ CONFIG_ENABLE_MUST_CHECK=y CONFIG_LOG_BUF_SHIFT=14 CONFIG_CROSSCOMPILE=y CONFIG_CMDLINE="" -CONFIG_SYS_SUPPORTS_KGDB=y # # Security options diff --git a/arch/mips/configs/db1550_defconfig b/arch/mips/configs/db1550_defconfig index e4e3244..a190ac0 100644 --- a/arch/mips/configs/db1550_defconfig +++ b/arch/mips/configs/db1550_defconfig @@ -1209,7 +1209,6 @@ CONFIG_ENABLE_MUST_CHECK=y CONFIG_LOG_BUF_SHIFT=14 CONFIG_CROSSCOMPILE=y CONFIG_CMDLINE="" -CONFIG_SYS_SUPPORTS_KGDB=y # # Security options diff --git a/arch/mips/configs/excite_defconfig b/arch/mips/configs/excite_defconfig index 3572e80..4e465e9 100644 --- a/arch/mips/configs/excite_defconfig +++ b/arch/mips/configs/excite_defconfig @@ -1269,7 +1269,6 @@ CONFIG_ENABLE_MUST_CHECK=y CONFIG_LOG_BUF_SHIFT=14 CONFIG_CROSSCOMPILE=y CONFIG_CMDLINE="" -CONFIG_SYS_SUPPORTS_KGDB=y # # Security options diff --git a/arch/mips/configs/ip27_defconfig b/arch/mips/configs/ip27_defconfig index 138c575..831d3e5 100644 --- a/arch/mips/configs/ip27_defconfig +++ b/arch/mips/configs/ip27_defconfig @@ -943,7 +943,6 @@ CONFIG_ENABLE_MUST_CHECK=y # CONFIG_DEBUG_KERNEL is not set CONFIG_CROSSCOMPILE=y CONFIG_CMDLINE="" -CONFIG_SYS_SUPPORTS_KGDB=y # # Security options diff --git a/arch/mips/configs/msp71xx_defconfig b/arch/mips/configs/msp71xx_defconfig index 59d1947..dd13db4 100644 --- a/arch/mips/configs/msp71xx_defconfig +++ b/arch/mips/configs/msp71xx_defconfig @@ -1415,8 +1415,6 @@ CONFIG_FORCED_INLINING=y CONFIG_CROSSCOMPILE=y CONFIG_CMDLINE="" # CONFIG_DEBUG_STACK_USAGE is not set -# CONFIG_KGDB is not set -CONFIG_SYS_SUPPORTS_KGDB=y # CONFIG_RUNTIME_DEBUG is not set # CONFIG_MIPS_UNCACHED is not set diff --git a/arch/mips/configs/mtx1_defconfig b/arch/mips/configs/mtx1_defconfig index bacf0dd..db92726 100644 --- a/arch/mips/configs/mtx1_defconfig +++ b/arch/mips/configs/mtx1_defconfig @@ -3020,7 +3020,6 @@ CONFIG_MAGIC_SYSRQ=y # CONFIG_DEBUG_KERNEL is not set CONFIG_CROSSCOMPILE=y CONFIG_CMDLINE="" -CONFIG_SYS_SUPPORTS_KGDB=y # # Security options diff --git a/arch/mips/configs/pb1100_defconfig b/arch/mips/configs/pb1100_defconfig index 6dfe6f7..9e21e33 100644 --- a/arch/mips/configs/pb1100_defconfig +++ b/arch/mips/configs/pb1100_defconfig @@ -1085,7 +1085,6 @@ CONFIG_ENABLE_MUST_CHECK=y CONFIG_LOG_BUF_SHIFT=14 CONFIG_CROSSCOMPILE=y CONFIG_CMDLINE="" -CONFIG_SYS_SUPPORTS_KGDB=y # # Security options diff --git a/arch/mips/configs/pb1500_defconfig b/arch/mips/configs/pb1500_defconfig index c965a87..af67ed4 100644 --- a/arch/mips/configs/pb1500_defconfig +++ b/arch/mips/configs/pb1500_defconfig @@ -1202,7 +1202,6 @@ CONFIG_ENABLE_MUST_CHECK=y CONFIG_LOG_BUF_SHIFT=14 CONFIG_CROSSCOMPILE=y CONFIG_CMDLINE="" -CONFIG_SYS_SUPPORTS_KGDB=y # # Security options diff --git a/arch/mips/configs/pb1550_defconfig b/arch/mips/configs/pb1550_defconfig index 0778996..7956f56 100644 --- a/arch/mips/configs/pb1550_defconfig +++ b/arch/mips/configs/pb1550_defconfig @@ -1195,7 +1195,6 @@ CONFIG_ENABLE_MUST_CHECK=y CONFIG_LOG_BUF_SHIFT=14 CONFIG_CROSSCOMPILE=y CONFIG_CMDLINE="" -CONFIG_SYS_SUPPORTS_KGDB=y # # Security options diff --git a/arch/mips/configs/pnx8550-jbs_defconfig b/arch/mips/configs/pnx8550-jbs_defconfig index 37c7b5f..723bd51 100644 --- a/arch/mips/configs/pnx8550-jbs_defconfig +++ b/arch/mips/configs/pnx8550-jbs_defconfig @@ -1216,10 +1216,8 @@ CONFIG_DEBUG_MUTEXES=y CONFIG_FORCED_INLINING=y # CONFIG_RCU_TORTURE_TEST is not set CONFIG_CROSSCOMPILE=y -CONFIG_CMDLINE="console=ttyS1,38400n8 kgdb=ttyS0 root=/dev/nfs ip=bootp" +CONFIG_CMDLINE="console=ttyS1,38400n8 root=/dev/nfs ip=bootp" # CONFIG_DEBUG_STACK_USAGE is not set -# CONFIG_KGDB is not set -CONFIG_SYS_SUPPORTS_KGDB=y # CONFIG_RUNTIME_DEBUG is not set # diff --git a/arch/mips/configs/pnx8550-stb810_defconfig b/arch/mips/configs/pnx8550-stb810_defconfig index 893e5c4..b5052fb 100644 --- a/arch/mips/configs/pnx8550-stb810_defconfig +++ b/arch/mips/configs/pnx8550-stb810_defconfig @@ -1206,10 +1206,8 @@ CONFIG_DEBUG_SLAB=y CONFIG_FORCED_INLINING=y # CONFIG_RCU_TORTURE_TEST is not set CONFIG_CROSSCOMPILE=y -CONFIG_CMDLINE="console=ttyS1,38400n8 kgdb=ttyS0 root=/dev/nfs ip=bootp" +CONFIG_CMDLINE="console=ttyS1,38400n8 root=/dev/nfs ip=bootp" # CONFIG_DEBUG_STACK_USAGE is not set -# CONFIG_KGDB is not set -CONFIG_SYS_SUPPORTS_KGDB=y # CONFIG_RUNTIME_DEBUG is not set # diff --git a/arch/mips/configs/rbtx49xx_defconfig b/arch/mips/configs/rbtx49xx_defconfig index e42aed5..c7c0864 100644 --- a/arch/mips/configs/rbtx49xx_defconfig +++ b/arch/mips/configs/rbtx49xx_defconfig @@ -742,7 +742,6 @@ CONFIG_DEBUG_FS=y # CONFIG_DEBUG_KERNEL is not set # CONFIG_SAMPLES is not set CONFIG_CMDLINE="" -CONFIG_SYS_SUPPORTS_KGDB=y # # Security options diff --git a/arch/mips/configs/sb1250-swarm_defconfig b/arch/mips/configs/sb1250-swarm_defconfig index 1ea9786..a9acaa2f 100644 --- a/arch/mips/configs/sb1250-swarm_defconfig +++ b/arch/mips/configs/sb1250-swarm_defconfig @@ -963,7 +963,6 @@ CONFIG_ENABLE_MUST_CHECK=y # CONFIG_DEBUG_KERNEL is not set # CONFIG_SAMPLES is not set CONFIG_CMDLINE="" -CONFIG_SYS_SUPPORTS_KGDB=y # CONFIG_SB1XXX_CORELIS is not set # diff --git a/arch/mips/configs/yosemite_defconfig b/arch/mips/configs/yosemite_defconfig index 7f86c43..ea8249c 100644 --- a/arch/mips/configs/yosemite_defconfig +++ b/arch/mips/configs/yosemite_defconfig @@ -827,8 +827,6 @@ CONFIG_FORCED_INLINING=y CONFIG_CROSSCOMPILE=y CONFIG_CMDLINE="" # CONFIG_DEBUG_STACK_USAGE is not set -# CONFIG_KGDB is not set -CONFIG_SYS_SUPPORTS_KGDB=y # CONFIG_RUNTIME_DEBUG is not set # diff --git a/arch/mips/emma2rh/markeins/platform.c b/arch/mips/emma2rh/markeins/platform.c index 1156770..d70627d 100644 --- a/arch/mips/emma2rh/markeins/platform.c +++ b/arch/mips/emma2rh/markeins/platform.c @@ -34,7 +34,6 @@ #include <asm/bcache.h> #include <asm/irq.h> #include <asm/reboot.h> -#include <asm/gdb-stub.h> #include <asm/traps.h> #include <asm/debug.h> diff --git a/arch/mips/emma2rh/markeins/setup.c b/arch/mips/emma2rh/markeins/setup.c index 62bfb45..a56c4b8 100644 --- a/arch/mips/emma2rh/markeins/setup.c +++ b/arch/mips/emma2rh/markeins/setup.c @@ -41,7 +41,6 @@ #include <asm/bcache.h> #include <asm/irq.h> #include <asm/reboot.h> -#include <asm/gdb-stub.h> #include <asm/traps.h> #include <asm/debug.h> diff --git a/arch/mips/kernel/Makefile b/arch/mips/kernel/Makefile index 0fd3197..73ff048 100644 --- a/arch/mips/kernel/Makefile +++ b/arch/mips/kernel/Makefile @@ -71,7 +71,6 @@ obj-$(CONFIG_MIPS32_COMPAT) += linux32.o ptrace32.o signal32.o obj-$(CONFIG_MIPS32_N32) += binfmt_elfn32.o scall64-n32.o signal_n32.o obj-$(CONFIG_MIPS32_O32) += binfmt_elfo32.o scall64-o32.o -obj-$(CONFIG_KGDB) += gdb-low.o gdb-stub.o obj-$(CONFIG_PROC_FS) += proc.o obj-$(CONFIG_64BIT) += cpu-bugs64.o diff --git a/arch/mips/kernel/gdb-low.S b/arch/mips/kernel/gdb-low.S deleted file mode 100644 index 2c44606..0000000 --- a/arch/mips/kernel/gdb-low.S +++ /dev/null @@ -1,394 +0,0 @@ -/* - * gdb-low.S contains the low-level trap handler for the GDB stub. - * - * Copyright (C) 1995 Andreas Busse - */ -#include <linux/sys.h> - -#include <asm/asm.h> -#include <asm/errno.h> -#include <asm/irqflags.h> -#include <asm/mipsregs.h> -#include <asm/regdef.h> -#include <asm/stackframe.h> -#include <asm/gdb-stub.h> - -#ifdef CONFIG_32BIT -#define DMFC0 mfc0 -#define DMTC0 mtc0 -#define LDC1 lwc1 -#define SDC1 lwc1 -#endif -#ifdef CONFIG_64BIT -#define DMFC0 dmfc0 -#define DMTC0 dmtc0 -#define LDC1 ldc1 -#define SDC1 ldc1 -#endif - -/* - * [jsun] We reserves about 2x GDB_FR_SIZE in stack. The lower (addressed) - * part is used to store registers and passed to exception handler. - * The upper part is reserved for "call func" feature where gdb client - * saves some of the regs, setups call frame and passes args. - * - * A trace shows about 200 bytes are used to store about half of all regs. - * The rest should be big enough for frame setup and passing args. - */ - -/* - * The low level trap handler - */ - .align 5 - NESTED(trap_low, GDB_FR_SIZE, sp) - .set noat - .set noreorder - - mfc0 k0, CP0_STATUS - sll k0, 3 /* extract cu0 bit */ - bltz k0, 1f - move k1, sp - - /* - * Called from user mode, go somewhere else. - */ - mfc0 k0, CP0_CAUSE - andi k0, k0, 0x7c -#ifdef CONFIG_64BIT - dsll k0, k0, 1 -#endif - PTR_L k1, saved_vectors(k0) - jr k1 - nop -1: - move k0, sp - PTR_SUBU sp, k1, GDB_FR_SIZE*2 # see comment above - LONG_S k0, GDB_FR_REG29(sp) - LONG_S $2, GDB_FR_REG2(sp) - -/* - * First save the CP0 and special registers - */ - - mfc0 v0, CP0_STATUS - LONG_S v0, GDB_FR_STATUS(sp) - mfc0 v0, CP0_CAUSE - LONG_S v0, GDB_FR_CAUSE(sp) - DMFC0 v0, CP0_EPC - LONG_S v0, GDB_FR_EPC(sp) - DMFC0 v0, CP0_BADVADDR - LONG_S v0, GDB_FR_BADVADDR(sp) - mfhi v0 - LONG_S v0, GDB_FR_HI(sp) - mflo v0 - LONG_S v0, GDB_FR_LO(sp) - -/* - * Now the integer registers - */ - - LONG_S zero, GDB_FR_REG0(sp) /* I know... */ - LONG_S $1, GDB_FR_REG1(sp) - /* v0 already saved */ - LONG_S $3, GDB_FR_REG3(sp) - LONG_S $4, GDB_FR_REG4(sp) - LONG_S $5, GDB_FR_REG5(sp) - LONG_S $6, GDB_FR_REG6(sp) - LONG_S $7, GDB_FR_REG7(sp) - LONG_S $8, GDB_FR_REG8(sp) - LONG_S $9, GDB_FR_REG9(sp) - LONG_S $10, GDB_FR_REG10(sp) - LONG_S $11, GDB_FR_REG11(sp) - LONG_S $12, GDB_FR_REG12(sp) - LONG_S $13, GDB_FR_REG13(sp) - LONG_S $14, GDB_FR_REG14(sp) - LONG_S $15, GDB_FR_REG15(sp) - LONG_S $16, GDB_FR_REG16(sp) - LONG_S $17, GDB_FR_REG17(sp) - LONG_S $18, GDB_FR_REG18(sp) - LONG_S $19, GDB_FR_REG19(sp) - LONG_S $20, GDB_FR_REG20(sp) - LONG_S $21, GDB_FR_REG21(sp) - LONG_S $22, GDB_FR_REG22(sp) - LONG_S $23, GDB_FR_REG23(sp) - LONG_S $24, GDB_FR_REG24(sp) - LONG_S $25, GDB_FR_REG25(sp) - LONG_S $26, GDB_FR_REG26(sp) - LONG_S $27, GDB_FR_REG27(sp) - LONG_S $28, GDB_FR_REG28(sp) - /* sp already saved */ - LONG_S $30, GDB_FR_REG30(sp) - LONG_S $31, GDB_FR_REG31(sp) - - CLI /* disable interrupts */ - TRACE_IRQS_OFF - -/* - * Followed by the floating point registers - */ - mfc0 v0, CP0_STATUS /* FPU enabled? */ - srl v0, v0, 16 - andi v0, v0, (ST0_CU1 >> 16) - - beqz v0,2f /* disabled, skip */ - nop - - SDC1 $0, GDB_FR_FPR0(sp) - SDC1 $1, GDB_FR_FPR1(sp) - SDC1 $2, GDB_FR_FPR2(sp) - SDC1 $3, GDB_FR_FPR3(sp) - SDC1 $4, GDB_FR_FPR4(sp) - SDC1 $5, GDB_FR_FPR5(sp) - SDC1 $6, GDB_FR_FPR6(sp) - SDC1 $7, GDB_FR_FPR7(sp) - SDC1 $8, GDB_FR_FPR8(sp) - SDC1 $9, GDB_FR_FPR9(sp) - SDC1 $10, GDB_FR_FPR10(sp) - SDC1 $11, GDB_FR_FPR11(sp) - SDC1 $12, GDB_FR_FPR12(sp) - SDC1 $13, GDB_FR_FPR13(sp) - SDC1 $14, GDB_FR_FPR14(sp) - SDC1 $15, GDB_FR_FPR15(sp) - SDC1 $16, GDB_FR_FPR16(sp) - SDC1 $17, GDB_FR_FPR17(sp) - SDC1 $18, GDB_FR_FPR18(sp) - SDC1 $19, GDB_FR_FPR19(sp) - SDC1 $20, GDB_FR_FPR20(sp) - SDC1 $21, GDB_FR_FPR21(sp) - SDC1 $22, GDB_FR_FPR22(sp) - SDC1 $23, GDB_FR_FPR23(sp) - SDC1 $24, GDB_FR_FPR24(sp) - SDC1 $25, GDB_FR_FPR25(sp) - SDC1 $26, GDB_FR_FPR26(sp) - SDC1 $27, GDB_FR_FPR27(sp) - SDC1 $28, GDB_FR_FPR28(sp) - SDC1 $29, GDB_FR_FPR29(sp) - SDC1 $30, GDB_FR_FPR30(sp) - SDC1 $31, GDB_FR_FPR31(sp) - -/* - * FPU control registers - */ - - cfc1 v0, CP1_STATUS - LONG_S v0, GDB_FR_FSR(sp) - cfc1 v0, CP1_REVISION - LONG_S v0, GDB_FR_FIR(sp) - -/* - * Current stack frame ptr - */ - -2: - LONG_S sp, GDB_FR_FRP(sp) - -/* - * CP0 registers (R4000/R4400 unused registers skipped) - */ - - mfc0 v0, CP0_INDEX - LONG_S v0, GDB_FR_CP0_INDEX(sp) - mfc0 v0, CP0_RANDOM - LONG_S v0, GDB_FR_CP0_RANDOM(sp) - DMFC0 v0, CP0_ENTRYLO0 - LONG_S v0, GDB_FR_CP0_ENTRYLO0(sp) - DMFC0 v0, CP0_ENTRYLO1 - LONG_S v0, GDB_FR_CP0_ENTRYLO1(sp) - DMFC0 v0, CP0_CONTEXT - LONG_S v0, GDB_FR_CP0_CONTEXT(sp) - mfc0 v0, CP0_PAGEMASK - LONG_S v0, GDB_FR_CP0_PAGEMASK(sp) - mfc0 v0, CP0_WIRED - LONG_S v0, GDB_FR_CP0_WIRED(sp) - DMFC0 v0, CP0_ENTRYHI - LONG_S v0, GDB_FR_CP0_ENTRYHI(sp) - mfc0 v0, CP0_PRID - LONG_S v0, GDB_FR_CP0_PRID(sp) - - .set at - -/* - * Continue with the higher level handler - */ - - move a0,sp - - jal handle_exception - nop - -/* - * Restore all writable registers, in reverse order - */ - - .set noat - - LONG_L v0, GDB_FR_CP0_ENTRYHI(sp) - LONG_L v1, GDB_FR_CP0_WIRED(sp) - DMTC0 v0, CP0_ENTRYHI - mtc0 v1, CP0_WIRED - LONG_L v0, GDB_FR_CP0_PAGEMASK(sp) - LONG_L v1, GDB_FR_CP0_ENTRYLO1(sp) - mtc0 v0, CP0_PAGEMASK - DMTC0 v1, CP0_ENTRYLO1 - LONG_L v0, GDB_FR_CP0_ENTRYLO0(sp) - LONG_L v1, GDB_FR_CP0_INDEX(sp) - DMTC0 v0, CP0_ENTRYLO0 - LONG_L v0, GDB_FR_CP0_CONTEXT(sp) - mtc0 v1, CP0_INDEX - DMTC0 v0, CP0_CONTEXT - - -/* - * Next, the floating point registers - */ - mfc0 v0, CP0_STATUS /* check if the FPU is enabled */ - srl v0, v0, 16 - andi v0, v0, (ST0_CU1 >> 16) - - beqz v0, 3f /* disabled, skip */ - nop - - LDC1 $31, GDB_FR_FPR31(sp) - LDC1 $30, GDB_FR_FPR30(sp) - LDC1 $29, GDB_FR_FPR29(sp) - LDC1 $28, GDB_FR_FPR28(sp) - LDC1 $27, GDB_FR_FPR27(sp) - LDC1 $26, GDB_FR_FPR26(sp) - LDC1 $25, GDB_FR_FPR25(sp) - LDC1 $24, GDB_FR_FPR24(sp) - LDC1 $23, GDB_FR_FPR23(sp) - LDC1 $22, GDB_FR_FPR22(sp) - LDC1 $21, GDB_FR_FPR21(sp) - LDC1 $20, GDB_FR_FPR20(sp) - LDC1 $19, GDB_FR_FPR19(sp) - LDC1 $18, GDB_FR_FPR18(sp) - LDC1 $17, GDB_FR_FPR17(sp) - LDC1 $16, GDB_FR_FPR16(sp) - LDC1 $15, GDB_FR_FPR15(sp) - LDC1 $14, GDB_FR_FPR14(sp) - LDC1 $13, GDB_FR_FPR13(sp) - LDC1 $12, GDB_FR_FPR12(sp) - LDC1 $11, GDB_FR_FPR11(sp) - LDC1 $10, GDB_FR_FPR10(sp) - LDC1 $9, GDB_FR_FPR9(sp) - LDC1 $8, GDB_FR_FPR8(sp) - LDC1 $7, GDB_FR_FPR7(sp) - LDC1 $6, GDB_FR_FPR6(sp) - LDC1 $5, GDB_FR_FPR5(sp) - LDC1 $4, GDB_FR_FPR4(sp) - LDC1 $3, GDB_FR_FPR3(sp) - LDC1 $2, GDB_FR_FPR2(sp) - LDC1 $1, GDB_FR_FPR1(sp) - LDC1 $0, GDB_FR_FPR0(sp) - -/* - * Now the CP0 and integer registers - */ - -3: -#ifdef CONFIG_MIPS_MT_SMTC - /* Read-modify write of Status must be atomic */ - mfc0 t2, CP0_TCSTATUS - ori t1, t2, TCSTATUS_IXMT - mtc0 t1, CP0_TCSTATUS - andi t2, t2, TCSTATUS_IXMT - _ehb - DMT 9 # dmt t1 - jal mips_ihb - nop -#endif /* CONFIG_MIPS_MT_SMTC */ - mfc0 t0, CP0_STATUS - ori t0, 0x1f - xori t0, 0x1f - mtc0 t0, CP0_STATUS -#ifdef CONFIG_MIPS_MT_SMTC - andi t1, t1, VPECONTROL_TE - beqz t1, 9f - nop - EMT # emt -9: - mfc0 t1, CP0_TCSTATUS - xori t1, t1, TCSTATUS_IXMT - or t1, t1, t2 - mtc0 t1, CP0_TCSTATUS - _ehb -#endif /* CONFIG_MIPS_MT_SMTC */ - LONG_L v0, GDB_FR_STATUS(sp) - LONG_L v1, GDB_FR_EPC(sp) - mtc0 v0, CP0_STATUS - DMTC0 v1, CP0_EPC - LONG_L v0, GDB_FR_HI(sp) - LONG_L v1, GDB_FR_LO(sp) - mthi v0 - mtlo v1 - LONG_L $31, GDB_FR_REG31(sp) - LONG_L $30, GDB_FR_REG30(sp) - LONG_L $28, GDB_FR_REG28(sp) - LONG_L $27, GDB_FR_REG27(sp) - LONG_L $26, GDB_FR_REG26(sp) - LONG_L $25, GDB_FR_REG25(sp) - LONG_L $24, GDB_FR_REG24(sp) - LONG_L $23, GDB_FR_REG23(sp) - LONG_L $22, GDB_FR_REG22(sp) - LONG_L $21, GDB_FR_REG21(sp) - LONG_L $20, GDB_FR_REG20(sp) - LONG_L $19, GDB_FR_REG19(sp) - LONG_L $18, GDB_FR_REG18(sp) - LONG_L $17, GDB_FR_REG17(sp) - LONG_L $16, GDB_FR_REG16(sp) - LONG_L $15, GDB_FR_REG15(sp) - LONG_L $14, GDB_FR_REG14(sp) - LONG_L $13, GDB_FR_REG13(sp) - LONG_L $12, GDB_FR_REG12(sp) - LONG_L $11, GDB_FR_REG11(sp) - LONG_L $10, GDB_FR_REG10(sp) - LONG_L $9, GDB_FR_REG9(sp) - LONG_L $8, GDB_FR_REG8(sp) - LONG_L $7, GDB_FR_REG7(sp) - LONG_L $6, GDB_FR_REG6(sp) - LONG_L $5, GDB_FR_REG5(sp) - LONG_L $4, GDB_FR_REG4(sp) - LONG_L $3, GDB_FR_REG3(sp) - LONG_L $2, GDB_FR_REG2(sp) - LONG_L $1, GDB_FR_REG1(sp) -#if defined(CONFIG_CPU_R3000) || defined(CONFIG_CPU_TX39XX) - LONG_L k0, GDB_FR_EPC(sp) - LONG_L $29, GDB_FR_REG29(sp) /* Deallocate stack */ - jr k0 - rfe -#else - LONG_L sp, GDB_FR_REG29(sp) /* Deallocate stack */ - - .set mips3 - eret - .set mips0 -#endif - .set at - .set reorder - END(trap_low) - -LEAF(kgdb_read_byte) -4: lb t0, (a0) - sb t0, (a1) - li v0, 0 - jr ra - .section __ex_table,"a" - PTR 4b, kgdbfault - .previous - END(kgdb_read_byte) - -LEAF(kgdb_write_byte) -5: sb a0, (a1) - li v0, 0 - jr ra - .section __ex_table,"a" - PTR 5b, kgdbfault - .previous - END(kgdb_write_byte) - - .type kgdbfault@function - .ent kgdbfault - -kgdbfault: li v0, -EFAULT - jr ra - .end kgdbfault diff --git a/arch/mips/kernel/gdb-stub.c b/arch/mips/kernel/gdb-stub.c deleted file mode 100644 index 25f4eab..0000000 --- a/arch/mips/kernel/gdb-stub.c +++ /dev/null @@ -1,1155 +0,0 @@ -/* - * arch/mips/kernel/gdb-stub.c - * - * Originally written by Glenn Engel, Lake Stevens Instrument Division - * - * Contributed by HP Systems - * - * Modified for SPARC by Stu Grossman, Cygnus Support. - * - * Modified for Linux/MIPS (and MIPS in general) by Andreas Busse - * Send complaints, suggestions etc. to <andy@waldorf-gmbh.de> - * - * Copyright (C) 1995 Andreas Busse - * - * Copyright (C) 2003 MontaVista Software Inc. - * Author: Jun Sun, jsun@mvista.com or jsun@junsun.net - */ - -/* - * To enable debugger support, two things need to happen. One, a - * call to set_debug_traps() is necessary in order to allow any breakpoints - * or error conditions to be properly intercepted and reported to gdb. - * Two, a breakpoint needs to be generated to begin communication. This - * is most easily accomplished by a call to breakpoint(). Breakpoint() - * simulates a breakpoint by executing a BREAK instruction. - * - * - * The following gdb commands are supported: - * - * command function Return value - * - * g return the value of the CPU registers hex data or ENN - * G set the value of the CPU registers OK or ENN - * - * mAA..AA,LLLL Read LLLL bytes at address AA..AA hex data or ENN - * MAA..AA,LLLL: Write LLLL bytes at address AA.AA OK or ENN - * - * c Resume at current address SNN ( signal NN) - * cAA..AA Continue at address AA..AA SNN - * - * s Step one instruction SNN - * sAA..AA Step one instruction from AA..AA SNN - * - * k kill - * - * ? What was the last sigval ? SNN (signal NN) - * - * bBB..BB Set baud rate to BB..BB OK or BNN, then sets - * baud rate - * - * All commands and responses are sent with a packet which includes a - * checksum. A packet consists of - * - * $<packet info>#<checksum>. - * - * where - * <packet info> :: <characters representing the command or response> - * <checksum> :: < two hex digits computed as modulo 256 sum of <packetinfo>> - * - * When a packet is received, it is first acknowledged with either '+' or '-'. - * '+' indicates a successful transfer. '-' indicates a failed transfer. - * - * Example: - * - * Host: Reply: - * $m0,10#2a +$00010203040506070809101112131415#42 - * - * - * ============== - * MORE EXAMPLES: - * ============== - * - * For reference -- the following are the steps that one - * company took (RidgeRun Inc) to get remote gdb debugging - * going. In this scenario the host machine was a PC and the - * target platform was a Galileo EVB64120A MIPS evaluation - * board. - * - * Step 1: - * First download gdb-5.0.tar.gz from the internet. - * and then build/install the package. - * - * Example: - * $ tar zxf gdb-5.0.tar.gz - * $ cd gdb-5.0 - * $ ./configure --target=mips-linux-elf - * $ make - * $ install - * $ which mips-linux-elf-gdb - * /usr/local/bin/mips-linux-elf-gdb - * - * Step 2: - * Configure linux for remote debugging and build it. - * - * Example: - * $ cd ~/linux - * $ make menuconfig <go to "Kernel Hacking" and turn on remote debugging> - * $ make - * - * Step 3: - * Download the kernel to the remote target and start - * the kernel running. It will promptly halt and wait - * for the host gdb session to connect. It does this - * since the "Kernel Hacking" option has defined - * CONFIG_KGDB which in turn enables your calls - * to: - * set_debug_traps(); - * breakpoint(); - * - * Step 4: - * Start the gdb session on the host. - * - * Example: - * $ mips-linux-elf-gdb vmlinux - * (gdb) set remotebaud 115200 - * (gdb) target remote /dev/ttyS1 - * ...at this point you are connected to - * the remote target and can use gdb - * in the normal fasion. Setting - * breakpoints, single stepping, - * printing variables, etc. - */ -#include <linux/string.h> -#include <linux/kernel.h> -#include <linux/signal.h> -#include <linux/sched.h> -#include <linux/mm.h> -#include <linux/console.h> -#include <linux/init.h> -#include <linux/smp.h> -#include <linux/spinlock.h> -#include <linux/slab.h> -#include <linux/reboot.h> - -#include <asm/asm.h> -#include <asm/cacheflush.h> -#include <asm/mipsregs.h> -#include <asm/pgtable.h> -#include <asm/system.h> -#include <asm/gdb-stub.h> -#include <asm/inst.h> - -/* - * external low-level support routines - */ - -extern int putDebugChar(char c); /* write a single character */ -extern char getDebugChar(void); /* read and return a single char */ -extern void trap_low(void); - -/* - * breakpoint and test functions - */ -extern void breakpoint(void); -extern void breakinst(void); -extern void async_breakpoint(void); -extern void async_breakinst(void); -extern void adel(void); - -/* - * local prototypes - */ - -static void getpacket(char *buffer); -static void putpacket(char *buffer); -static int computeSignal(int tt); -static int hex(unsigned char ch); -static int hexToInt(char **ptr, int *intValue); -static int hexToLong(char **ptr, long *longValue); -static unsigned char *mem2hex(char *mem, char *buf, int count, int may_fault); -void handle_exception(struct gdb_regs *regs); - -int kgdb_enabled; - -/* - * spin locks for smp case - */ -static DEFINE_SPINLOCK(kgdb_lock); -static raw_spinlock_t kgdb_cpulock[NR_CPUS] = { - [0 ... NR_CPUS-1] = __RAW_SPIN_LOCK_UNLOCKED, -}; - -/* - * BUFMAX defines the maximum number of characters in inbound/outbound buffers - * at least NUMREGBYTES*2 are needed for register packets - */ -#define BUFMAX 2048 - -static char input_buffer[BUFMAX]; -static char output_buffer[BUFMAX]; -static int initialized; /* !0 means we've been initialized */ -static int kgdb_started; -static const char hexchars[]="0123456789abcdef"; - -/* Used to prevent crashes in memory access. Note that they'll crash anyway if - we haven't set up fault handlers yet... */ -int kgdb_read_byte(unsigned char *address, unsigned char *dest); -int kgdb_write_byte(unsigned char val, unsigned char *dest); - -/* - * Convert ch from a hex digit to an int - */ -static int hex(unsigned char ch) -{ - if (ch >= 'a' && ch <= 'f') - return ch-'a'+10; - if (ch >= '0' && ch <= '9') - return ch-'0'; - if (ch >= 'A' && ch <= 'F') - return ch-'A'+10; - return -1; -} - -/* - * scan for the sequence $<data>#<checksum> - */ -static void getpacket(char *buffer) -{ - unsigned char checksum; - unsigned char xmitcsum; - int i; - int count; - unsigned char ch; - - do { - /* - * wait around for the start character, - * ignore all other characters - */ - while ((ch = (getDebugChar() & 0x7f)) != '$') ; - - checksum = 0; - xmitcsum = -1; - count = 0; - - /* - * now, read until a # or end of buffer is found - */ - while (count < BUFMAX) { - ch = getDebugChar(); - if (ch == '#') - break; - checksum = checksum + ch; - buffer[count] = ch; - count = count + 1; - } - - if (count >= BUFMAX) - continue; - - buffer[count] = 0; - - if (ch == '#') { - xmitcsum = hex(getDebugChar() & 0x7f) << 4; - xmitcsum |= hex(getDebugChar() & 0x7f); - - if (checksum != xmitcsum) - putDebugChar('-'); /* failed checksum */ - else { - putDebugChar('+'); /* successful transfer */ - - /* - * if a sequence char is present, - * reply the sequence ID - */ - if (buffer[2] == ':') { - putDebugChar(buffer[0]); - putDebugChar(buffer[1]); - - /* - * remove sequence chars from buffer - */ - count = strlen(buffer); - for (i=3; i <= count; i++) - buffer[i-3] = buffer[i]; - } - } - } - } - while (checksum != xmitcsum); -} - -/* - * send the packet in buffer. - */ -static void putpacket(char *buffer) -{ - unsigned char checksum; - int count; - unsigned char ch; - - /* - * $<packet info>#<checksum>. - */ - - do { - putDebugChar('$'); - checksum = 0; - count = 0; - - while ((ch = buffer[count]) != 0) { - if (!(putDebugChar(ch))) - return; - checksum += ch; - count += 1; - } - - putDebugChar('#'); - putDebugChar(hexchars[checksum >> 4]); - putDebugChar(hexchars[checksum & 0xf]); - - } - while ((getDebugChar() & 0x7f) != '+'); -} - - -/* - * Convert the memory pointed to by mem into hex, placing result in buf. - * Return a pointer to the last char put in buf (null), in case of mem fault, - * return 0. - * may_fault is non-zero if we are reading from arbitrary memory, but is currently - * not used. - */ -static unsigned char *mem2hex(char *mem, char *buf, int count, int may_fault) -{ - unsigned char ch; - - while (count-- > 0) { - if (kgdb_read_byte(mem++, &ch) != 0) - return 0; - *buf++ = hexchars[ch >> 4]; - *buf++ = hexchars[ch & 0xf]; - } - - *buf = 0; - - return buf; -} - -/* - * convert the hex array pointed to by buf into binary to be placed in mem - * return a pointer to the character AFTER the last byte written - * may_fault is non-zero if we are reading from arbitrary memory, but is currently - * not used. - */ -static char *hex2mem(char *buf, char *mem, int count, int binary, int may_fault) -{ - int i; - unsigned char ch; - - for (i=0; i<count; i++) - { - if (binary) { - ch = *buf++; - if (ch == 0x7d) - ch = 0x20 ^ *buf++; - } - else { - ch = hex(*buf++) << 4; - ch |= hex(*buf++); - } - if (kgdb_write_byte(ch, mem++) != 0) - return 0; - } - - return mem; -} - -/* - * This table contains the mapping between SPARC hardware trap types, and - * signals, which are primarily what GDB understands. It also indicates - * which hardware traps we need to commandeer when initializing the stub. - */ -static struct hard_trap_info { - unsigned char tt; /* Trap type code for MIPS R3xxx and R4xxx */ - unsigned char signo; /* Signal that we map this trap into */ -} hard_trap_info[] = { - { 6, SIGBUS }, /* instruction bus error */ - { 7, SIGBUS }, /* data bus error */ - { 9, SIGTRAP }, /* break */ - { 10, SIGILL }, /* reserved instruction */ -/* { 11, SIGILL }, */ /* CPU unusable */ - { 12, SIGFPE }, /* overflow */ - { 13, SIGTRAP }, /* trap */ - { 14, SIGSEGV }, /* virtual instruction cache coherency */ - { 15, SIGFPE }, /* floating point exception */ - { 23, SIGSEGV }, /* watch */ - { 31, SIGSEGV }, /* virtual data cache coherency */ - { 0, 0} /* Must be last */ -}; - -/* Save the normal trap handlers for user-mode traps. */ -void *saved_vectors[32]; - -/* - * Set up exception handlers for tracing and breakpoints - */ -void set_debug_traps(void) -{ - struct hard_trap_info *ht; - unsigned long flags; - unsigned char c; - - local_irq_save(flags); - for (ht = hard_trap_info; ht->tt && ht->signo; ht++) - saved_vectors[ht->tt] = set_except_vector(ht->tt, trap_low); - - putDebugChar('+'); /* 'hello world' */ - /* - * In case GDB is started before us, ack any packets - * (presumably "$?#xx") sitting there. - */ - while((c = getDebugChar()) != '$'); - while((c = getDebugChar()) != '#'); - c = getDebugChar(); /* eat first csum byte */ - c = getDebugChar(); /* eat second csum byte */ - putDebugChar('+'); /* ack it */ - - initialized = 1; - local_irq_restore(flags); -} - -void restore_debug_traps(void) -{ - struct hard_trap_info *ht; - unsigned long flags; - - local_irq_save(flags); - for (ht = hard_trap_info; ht->tt && ht->signo; ht++) - set_except_vector(ht->tt, saved_vectors[ht->tt]); - local_irq_restore(flags); -} - -/* - * Convert the MIPS hardware trap type code to a Unix signal number. - */ -static int computeSignal(int tt) -{ - struct hard_trap_info *ht; - - for (ht = hard_trap_info; ht->tt && ht->signo; ht++) - if (ht->tt == tt) - return ht->signo; - - return SIGHUP; /* default for things we don't know about */ -} - -/* - * While we find nice hex chars, build an int. - * Return number of chars processed. - */ -static int hexToInt(char **ptr, int *intValue) -{ - int numChars = 0; - int hexValue; - - *intValue = 0; - - while (**ptr) { - hexValue = hex(**ptr); - if (hexValue < 0) - break; - - *intValue = (*intValue << 4) | hexValue; - numChars ++; - - (*ptr)++; - } - - return (numChars); -} - -static int hexToLong(char **ptr, long *longValue) -{ - int numChars = 0; - int hexValue; - - *longValue = 0; - - while (**ptr) { - hexValue = hex(**ptr); - if (hexValue < 0) - break; - - *longValue = (*longValue << 4) | hexValue; - numChars ++; - - (*ptr)++; - } - - return numChars; -} - - -#if 0 -/* - * Print registers (on target console) - * Used only to debug the stub... - */ -void show_gdbregs(struct gdb_regs * regs) -{ - /* - * Saved main processor registers - */ - printk("$0 : %08lx %08lx %08lx %08lx %08lx %08lx %08lx %08lx\n", - regs->reg0, regs->reg1, regs->reg2, regs->reg3, - regs->reg4, regs->reg5, regs->reg6, regs->reg7); - printk("$8 : %08lx %08lx %08lx %08lx %08lx %08lx %08lx %08lx\n", - regs->reg8, regs->reg9, regs->reg10, regs->reg11, - regs->reg12, regs->reg13, regs->reg14, regs->reg15); - printk("$16: %08lx %08lx %08lx %08lx %08lx %08lx %08lx %08lx\n", - regs->reg16, regs->reg17, regs->reg18, regs->reg19, - regs->reg20, regs->reg21, regs->reg22, regs->reg23); - printk("$24: %08lx %08lx %08lx %08lx %08lx %08lx %08lx %08lx\n", - regs->reg24, regs->reg25, regs->reg26, regs->reg27, - regs->reg28, regs->reg29, regs->reg30, regs->reg31); - - /* - * Saved cp0 registers - */ - printk("epc : %08lx\nStatus: %08lx\nCause : %08lx\n", - regs->cp0_epc, regs->cp0_status, regs->cp0_cause); -} -#endif /* dead code */ - -/* - * We single-step by setting breakpoints. When an exception - * is handled, we need to restore the instructions hoisted - * when the breakpoints were set. - * - * This is where we save the original instructions. - */ -static struct gdb_bp_save { - unsigned long addr; - unsigned int val; -} step_bp[2]; - -#define BP 0x0000000d /* break opcode */ - -/* - * Set breakpoint instructions for single stepping. - */ -static void single_step(struct gdb_regs *regs) -{ - union mips_instruction insn; - unsigned long targ; - int is_branch, is_cond, i; - - targ = regs->cp0_epc; - insn.word = *(unsigned int *)targ; - is_branch = is_cond = 0; - - switch (insn.i_format.opcode) { - /* - * jr and jalr are in r_format format. - */ - case spec_op: - switch (insn.r_format.func) { - case jalr_op: - case jr_op: - targ = *(®s->reg0 + insn.r_format.rs); - is_branch = 1; - break; - } - break; - - /* - * This group contains: - * bltz_op, bgez_op, bltzl_op, bgezl_op, - * bltzal_op, bgezal_op, bltzall_op, bgezall_op. - */ - case bcond_op: - is_branch = is_cond = 1; - targ += 4 + (insn.i_format.simmediate << 2); - break; - - /* - * These are unconditional and in j_format. - */ - case jal_op: - case j_op: - is_branch = 1; - targ += 4; - targ >>= 28; - targ <<= 28; - targ |= (insn.j_format.target << 2); - break; - - /* - * These are conditional. - */ - case beq_op: - case beql_op: - case bne_op: - case bnel_op: - case blez_op: - case blezl_op: - case bgtz_op: - case bgtzl_op: - case cop0_op: - case cop1_op: - case cop2_op: - case cop1x_op: - is_branch = is_cond = 1; - targ += 4 + (insn.i_format.simmediate << 2); - break; - } - - if (is_branch) { - i = 0; - if (is_cond && targ != (regs->cp0_epc + 8)) { - step_bp[i].addr = regs->cp0_epc + 8; - step_bp[i++].val = *(unsigned *)(regs->cp0_epc + 8); - *(unsigned *)(regs->cp0_epc + 8) = BP; - } - step_bp[i].addr = targ; - step_bp[i].val = *(unsigned *)targ; - *(unsigned *)targ = BP; - } else { - step_bp[0].addr = regs->cp0_epc + 4; - step_bp[0].val = *(unsigned *)(regs->cp0_epc + 4); - *(unsigned *)(regs->cp0_epc + 4) = BP; - } -} - -/* - * If asynchronously interrupted by gdb, then we need to set a breakpoint - * at the interrupted instruction so that we wind up stopped with a - * reasonable stack frame. - */ -static struct gdb_bp_save async_bp; - -/* - * Swap the interrupted EPC with our asynchronous breakpoint routine. - * This is safer than stuffing the breakpoint in-place, since no cache - * flushes (or resulting smp_call_functions) are required. The - * assumption is that only one CPU will be handling asynchronous bp's, - * and only one can be active at a time. - */ -extern spinlock_t smp_call_lock; - -void set_async_breakpoint(unsigned long *epc) -{ - /* skip breaking into userland */ - if ((*epc & 0x80000000) == 0) - return; - -#ifdef CONFIG_SMP - /* avoid deadlock if someone is make IPC */ - if (spin_is_locked(&smp_call_lock)) - return; -#endif - - async_bp.addr = *epc; - *epc = (unsigned long)async_breakpoint; -} - -#ifdef CONFIG_SMP -static void kgdb_wait(void *arg) -{ - unsigned flags; - int cpu = smp_processor_id(); - - local_irq_save(flags); - - __raw_spin_lock(&kgdb_cpulock[cpu]); - __raw_spin_unlock(&kgdb_cpulock[cpu]); - - local_irq_restore(flags); -} -#endif - -/* - * GDB stub needs to call kgdb_wait on all processor with interrupts - * disabled, so it uses it's own special variant. - */ -static int kgdb_smp_call_kgdb_wait(void) -{ -#ifdef CONFIG_SMP - cpumask_t mask = cpu_online_map; - struct call_data_struct data; - int cpu = smp_processor_id(); - int cpus; - - /* - * Can die spectacularly if this CPU isn't yet marked online - */ - BUG_ON(!cpu_online(cpu)); - - cpu_clear(cpu, mask); - cpus = cpus_weight(mask); - if (!cpus) - return 0; - - if (spin_is_locked(&smp_call_lock)) { - /* - * Some other processor is trying to make us do something - * but we're not going to respond... give up - */ - return -1; - } - - /* - * We will continue here, accepting the fact that - * the kernel may deadlock if another CPU attempts - * to call smp_call_function now... - */ - - data.func = kgdb_wait; - data.info = NULL; - atomic_set(&data.started, 0); - data.wait = 0; - - spin_lock(&smp_call_lock); - call_data = &data; - mb(); - - core_send_ipi_mask(mask, SMP_CALL_FUNCTION); - - /* Wait for response */ - /* FIXME: lock-up detection, backtrace on lock-up */ - while (atomic_read(&data.started) != cpus) - barrier(); - - call_data = NULL; - spin_unlock(&smp_call_lock); -#endif - - return 0; -} - -/* - * This function does all command processing for interfacing to gdb. It - * returns 1 if you should skip the instruction at the trap address, 0 - * otherwise. - */ -void handle_exception(struct gdb_regs *regs) -{ - int trap; /* Trap type */ - int sigval; - long addr; - int length; - char *ptr; - unsigned long *stack; - int i; - int bflag = 0; - - kgdb_started = 1; - - /* - * acquire the big kgdb spinlock - */ - if (!spin_trylock(&kgdb_lock)) { - /* - * some other CPU has the lock, we should go back to - * receive the gdb_wait IPC - */ - return; - } - - /* - * If we're in async_breakpoint(), restore the real EPC from - * the breakpoint. - */ - if (regs->cp0_epc == (unsigned long)async_breakinst) { - regs->cp0_epc = async_bp.addr; - async_bp.addr = 0; - } - - /* - * acquire the CPU spinlocks - */ - for_each_online_cpu(i) - if (__raw_spin_trylock(&kgdb_cpulock[i]) == 0) - panic("kgdb: couldn't get cpulock %d\n", i); - - /* - * force other cpus to enter kgdb - */ - kgdb_smp_call_kgdb_wait(); - - /* - * If we're in breakpoint() increment the PC - */ - trap = (regs->cp0_cause & 0x7c) >> 2; - if (trap == 9 && regs->cp0_epc == (unsigned long)breakinst) - regs->cp0_epc += 4; - - /* - * If we were single_stepping, restore the opcodes hoisted - * for the breakpoint[s]. - */ - if (step_bp[0].addr) { - *(unsigned *)step_bp[0].addr = step_bp[0].val; - step_bp[0].addr = 0; - - if (step_bp[1].addr) { - *(unsigned *)step_bp[1].addr = step_bp[1].val; - step_bp[1].addr = 0; - } - } - - stack = (long *)regs->reg29; /* stack ptr */ - sigval = computeSignal(trap); - - /* - * reply to host that an exception has occurred - */ - ptr = output_buffer; - - /* - * Send trap type (converted to signal) - */ - *ptr++ = 'T'; - *ptr++ = hexchars[sigval >> 4]; - *ptr++ = hexchars[sigval & 0xf]; - - /* - * Send Error PC - */ - *ptr++ = hexchars[REG_EPC >> 4]; - *ptr++ = hexchars[REG_EPC & 0xf]; - *ptr++ = ':'; - ptr = mem2hex((char *)®s->cp0_epc, ptr, sizeof(long), 0); - *ptr++ = ';'; - - /* - * Send frame pointer - */ - *ptr++ = hexchars[REG_FP >> 4]; - *ptr++ = hexchars[REG_FP & 0xf]; - *ptr++ = ':'; - ptr = mem2hex((char *)®s->reg30, ptr, sizeof(long), 0); - *ptr++ = ';'; - - /* - * Send stack pointer - */ - *ptr++ = hexchars[REG_SP >> 4]; - *ptr++ = hexchars[REG_SP & 0xf]; - *ptr++ = ':'; - ptr = mem2hex((char *)®s->reg29, ptr, sizeof(long), 0); - *ptr++ = ';'; - - *ptr++ = 0; - putpacket(output_buffer); /* send it off... */ - - /* - * Wait for input from remote GDB - */ - while (1) { - output_buffer[0] = 0; - getpacket(input_buffer); - - switch (input_buffer[0]) - { - case '?': - output_buffer[0] = 'S'; - output_buffer[1] = hexchars[sigval >> 4]; - output_buffer[2] = hexchars[sigval & 0xf]; - output_buffer[3] = 0; - break; - - /* - * Detach debugger; let CPU run - */ - case 'D': - putpacket(output_buffer); - goto finish_kgdb; - break; - - case 'd': - /* toggle debug flag */ - break; - - /* - * Return the value of the CPU registers - */ - case 'g': - ptr = output_buffer; - ptr = mem2hex((char *)®s->reg0, ptr, 32*sizeof(long), 0); /* r0...r31 */ - ptr = mem2hex((char *)®s->cp0_status, ptr, 6*sizeof(long), 0); /* cp0 */ - ptr = mem2hex((char *)®s->fpr0, ptr, 32*sizeof(long), 0); /* f0...31 */ - ptr = mem2hex((char *)®s->cp1_fsr, ptr, 2*sizeof(long), 0); /* cp1 */ - ptr = mem2hex((char *)®s->frame_ptr, ptr, 2*sizeof(long), 0); /* frp */ - ptr = mem2hex((char *)®s->cp0_index, ptr, 16*sizeof(long), 0); /* cp0 */ - break; - - /* - * set the value of the CPU registers - return OK - */ - case 'G': - { - ptr = &input_buffer[1]; - hex2mem(ptr, (char *)®s->reg0, 32*sizeof(long), 0, 0); - ptr += 32*(2*sizeof(long)); - hex2mem(ptr, (char *)®s->cp0_status, 6*sizeof(long), 0, 0); - ptr += 6*(2*sizeof(long)); - hex2mem(ptr, (char *)®s->fpr0, 32*sizeof(long), 0, 0); - ptr += 32*(2*sizeof(long)); - hex2mem(ptr, (char *)®s->cp1_fsr, 2*sizeof(long), 0, 0); - ptr += 2*(2*sizeof(long)); - hex2mem(ptr, (char *)®s->frame_ptr, 2*sizeof(long), 0, 0); - ptr += 2*(2*sizeof(long)); - hex2mem(ptr, (char *)®s->cp0_index, 16*sizeof(long), 0, 0); - strcpy(output_buffer, "OK"); - } - break; - - /* - * mAA..AA,LLLL Read LLLL bytes at address AA..AA - */ - case 'm': - ptr = &input_buffer[1]; - - if (hexToLong(&ptr, &addr) - && *ptr++ == ',' - && hexToInt(&ptr, &length)) { - if (mem2hex((char *)addr, output_buffer, length, 1)) - break; - strcpy(output_buffer, "E03"); - } else - strcpy(output_buffer, "E01"); - break; - - /* - * XAA..AA,LLLL: Write LLLL escaped binary bytes at address AA.AA - */ - case 'X': - bflag = 1; - /* fall through */ - - /* - * MAA..AA,LLLL: Write LLLL bytes at address AA.AA return OK - */ - case 'M': - ptr = &input_buffer[1]; - - if (hexToLong(&ptr, &addr) - && *ptr++ == ',' - && hexToInt(&ptr, &length) - && *ptr++ == ':') { - if (hex2mem(ptr, (char *)addr, length, bflag, 1)) - strcpy(output_buffer, "OK"); - else - strcpy(output_buffer, "E03"); - } - else - strcpy(output_buffer, "E02"); - break; - - /* - * cAA..AA Continue at address AA..AA(optional) - */ - case 'c': - /* try to read optional parameter, pc unchanged if no parm */ - - ptr = &input_buffer[1]; - if (hexToLong(&ptr, &addr)) - regs->cp0_epc = addr; - - goto exit_kgdb_exception; - break; - - /* - * kill the program; let us try to restart the machine - * Reset the whole machine. - */ - case 'k': - case 'r': - machine_restart("kgdb restarts machine"); - break; - - /* - * Step to next instruction - */ - case 's': - /* - * There is no single step insn in the MIPS ISA, so we - * use breakpoints and continue, instead. - */ - single_step(regs); - goto exit_kgdb_exception; - /* NOTREACHED */ - break; - - /* - * Set baud rate (bBB) - * FIXME: Needs to be written - */ - case 'b': - { -#if 0 - int baudrate; - extern void set_timer_3(); - - ptr = &input_buffer[1]; - if (!hexToInt(&ptr, &baudrate)) - { - strcpy(output_buffer, "B01"); - break; - } - - /* Convert baud rate to uart clock divider */ - - switch (baudrate) - { - case 38400: - baudrate = 16; - break; - case 19200: - baudrate = 33; - break; - case 9600: - baudrate = 65; - break; - default: - baudrate = 0; - strcpy(output_buffer, "B02"); - goto x1; - } - - if (baudrate) { - putpacket("OK"); /* Ack before changing speed */ - set_timer_3(baudrate); /* Set it */ - } -#endif - } - break; - - } /* switch */ - - /* - * reply to the request - */ - - putpacket(output_buffer); - - } /* while */ - - return; - -finish_kgdb: - restore_debug_traps(); - -exit_kgdb_exception: - /* release locks so other CPUs can go */ - for_each_online_cpu(i) - __raw_spin_unlock(&kgdb_cpulock[i]); - spin_unlock(&kgdb_lock); - - __flush_cache_all(); - return; -} - -/* - * This function will generate a breakpoint exception. It is used at the - * beginning of a program to sync up with a debugger and can be used - * otherwise as a quick means to stop program execution and "break" into - * the debugger. - */ -void breakpoint(void) -{ - if (!initialized) - return; - - __asm__ __volatile__( - ".globl breakinst\n\t" - ".set\tnoreorder\n\t" - "nop\n" - "breakinst:\tbreak\n\t" - "nop\n\t" - ".set\treorder" - ); -} - -/* Nothing but the break; don't pollute any registers */ -void async_breakpoint(void) -{ - __asm__ __volatile__( - ".globl async_breakinst\n\t" - ".set\tnoreorder\n\t" - "nop\n" - "async_breakinst:\tbreak\n\t" - "nop\n\t" - ".set\treorder" - ); -} - -void adel(void) -{ - __asm__ __volatile__( - ".globl\tadel\n\t" - "lui\t$8,0x8000\n\t" - "lw\t$9,1($8)\n\t" - ); -} - -/* - * malloc is needed by gdb client in "call func()", even a private one - * will make gdb happy - */ -static void __used *malloc(size_t size) -{ - return kmalloc(size, GFP_ATOMIC); -} - -static void __used free(void *where) -{ - kfree(where); -} - -#ifdef CONFIG_GDB_CONSOLE - -void gdb_putsn(const char *str, int l) -{ - char outbuf[18]; - - if (!kgdb_started) - return; - - outbuf[0]='O'; - - while(l) { - int i = (l>8)?8:l; - mem2hex((char *)str, &outbuf[1], i, 0); - outbuf[(i*2)+1]=0; - putpacket(outbuf); - str += i; - l -= i; - } -} - -static void gdb_console_write(struct console *con, const char *s, unsigned n) -{ - gdb_putsn(s, n); -} - -static struct console gdb_console = { - .name = "gdb", - .write = gdb_console_write, - .flags = CON_PRINTBUFFER, - .index = -1 -}; - -static int __init register_gdb_console(void) -{ - register_console(&gdb_console); - - return 0; -} - -console_initcall(register_gdb_console); - -#endif diff --git a/arch/mips/kernel/irq.c b/arch/mips/kernel/irq.c index 6045b9a..8acba08 100644 --- a/arch/mips/kernel/irq.c +++ b/arch/mips/kernel/irq.c @@ -126,19 +126,6 @@ asmlinkage void spurious_interrupt(void) atomic_inc(&irq_err_count); } -#ifdef CONFIG_KGDB -extern void breakpoint(void); -extern void set_debug_traps(void); - -static int kgdb_flag = 1; -static int __init nokgdb(char *str) -{ - kgdb_flag = 0; - return 1; -} -__setup("nokgdb", nokgdb); -#endif - void __init init_IRQ(void) { int i; @@ -147,12 +134,4 @@ void __init init_IRQ(void) set_irq_noprobe(i); arch_init_irq(); - -#ifdef CONFIG_KGDB - if (kgdb_flag) { - printk("Wait for gdb client connection ...\n"); - set_debug_traps(); - breakpoint(); - } -#endif } diff --git a/arch/mips/mti-malta/Makefile b/arch/mips/mti-malta/Makefile index f806444..3b7dd72 100644 --- a/arch/mips/mti-malta/Makefile +++ b/arch/mips/mti-malta/Makefile @@ -13,7 +13,6 @@ obj-y := malta-amon.o malta-cmdline.o \ obj-$(CONFIG_EARLY_PRINTK) += malta-console.o obj-$(CONFIG_PCI) += malta-pci.o -obj-$(CONFIG_KGDB) += malta-kgdb.o # FIXME FIXME FIXME obj-$(CONFIG_MIPS_MT_SMTC) += malta_smtc.o diff --git a/arch/mips/mti-malta/malta-init.c b/arch/mips/mti-malta/malta-init.c index c065302..4832af2 100644 --- a/arch/mips/mti-malta/malta-init.c +++ b/arch/mips/mti-malta/malta-init.c @@ -37,15 +37,6 @@ #include <asm/mips-boards/malta.h> -#ifdef CONFIG_KGDB -extern int rs_kgdb_hook(int, int); -extern int rs_putDebugChar(char); -extern char rs_getDebugChar(void); -extern int saa9730_kgdb_hook(int); -extern int saa9730_putDebugChar(char); -extern char saa9730_getDebugChar(void); -#endif - int prom_argc; int *_prom_argv, *_prom_envp; @@ -173,51 +164,6 @@ static void __init console_config(void) } #endif -#ifdef CONFIG_KGDB -void __init kgdb_config(void) -{ - extern int (*generic_putDebugChar)(char); - extern char (*generic_getDebugChar)(void); - char *argptr; - int line, speed; - - argptr = prom_getcmdline(); - if ((argptr = strstr(argptr, "kgdb=ttyS")) != NULL) { - argptr += strlen("kgdb=ttyS"); - if (*argptr != '0' && *argptr != '1') - printk("KGDB: Unknown serial line /dev/ttyS%c, " - "falling back to /dev/ttyS1\n", *argptr); - line = *argptr == '0' ? 0 : 1; - printk("KGDB: Using serial line /dev/ttyS%d for session\n", line); - - speed = 0; - if (*++argptr == ',') - { - int c; - while ((c = *++argptr) && ('0' <= c && c <= '9')) - speed = speed * 10 + c - '0'; - } - { - speed = rs_kgdb_hook(line, speed); - generic_putDebugChar = rs_putDebugChar; - generic_getDebugChar = rs_getDebugChar; - } - - pr_info("KGDB: Using serial line /dev/ttyS%d at %d for " - "session, please connect your debugger\n", - line ? 1 : 0, speed); - - { - char *s; - for (s = "Please connect GDB to this port\r\n"; *s; ) - generic_putDebugChar(*s++); - } - - /* Breakpoint is invoked after interrupts are initialised */ - } -} -#endif - static void __init mips_nmi_setup(void) { void *base; diff --git a/arch/mips/mti-malta/malta-kgdb.c b/arch/mips/mti-malta/malta-kgdb.c deleted file mode 100644 index 6a1854d..0000000 --- a/arch/mips/mti-malta/malta-kgdb.c +++ /dev/null @@ -1,133 +0,0 @@ -/* - * Carsten Langgaard, carstenl@mips.com - * Copyright (C) 2000 MIPS Technologies, Inc. All rights reserved. - * - * This program is free software; you can distribute it and/or modify it - * under the terms of the GNU General Public License (Version 2) as - * published by the Free Software Foundation. - * - * This program is distributed in the hope it will be useful, but WITHOUT - * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or - * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License - * for more details. - * - * You should have received a copy of the GNU General Public License along - * with this program; if not, write to the Free Software Foundation, Inc., - * 59 Temple Place - Suite 330, Boston MA 02111-1307, USA. - * - * This is the interface to the remote debugger stub. - */ -#include <linux/types.h> -#include <linux/serial.h> -#include <linux/serialP.h> -#include <linux/serial_reg.h> - -#include <asm/serial.h> -#include <asm/io.h> - -static struct serial_state rs_table[] = { - SERIAL_PORT_DFNS /* Defined in serial.h */ -}; - -static struct async_struct kdb_port_info = {0}; - -int (*generic_putDebugChar)(char); -char (*generic_getDebugChar)(void); - -static __inline__ unsigned int serial_in(struct async_struct *info, int offset) -{ - return inb(info->port + offset); -} - -static __inline__ void serial_out(struct async_struct *info, int offset, - int value) -{ - outb(value, info->port+offset); -} - -int rs_kgdb_hook(int tty_no, int speed) { - int t; - struct serial_state *ser = &rs_table[tty_no]; - - kdb_port_info.state = ser; - kdb_port_info.magic = SERIAL_MAGIC; - kdb_port_info.port = ser->port; - kdb_port_info.flags = ser->flags; - - /* - * Clear all interrupts - */ - serial_in(&kdb_port_info, UART_LSR); - serial_in(&kdb_port_info, UART_RX); - serial_in(&kdb_port_info, UART_IIR); - serial_in(&kdb_port_info, UART_MSR); - - /* - * Now, initialize the UART - */ - serial_out(&kdb_port_info, UART_LCR, UART_LCR_WLEN8); /* reset DLAB */ - if (kdb_port_info.flags & ASYNC_FOURPORT) { - kdb_port_info.MCR = UART_MCR_DTR | UART_MCR_RTS; - t = UART_MCR_DTR | UART_MCR_OUT1; - } else { - kdb_port_info.MCR - = UART_MCR_DTR | UART_MCR_RTS | UART_MCR_OUT2; - t = UART_MCR_DTR | UART_MCR_RTS; - } - - kdb_port_info.MCR = t; /* no interrupts, please */ - serial_out(&kdb_port_info, UART_MCR, kdb_port_info.MCR); - - /* - * and set the speed of the serial port - */ - if (speed == 0) - speed = 9600; - - t = kdb_port_info.state->baud_base / speed; - /* set DLAB */ - serial_out(&kdb_port_info, UART_LCR, UART_LCR_WLEN8 | UART_LCR_DLAB); - serial_out(&kdb_port_info, UART_DLL, t & 0xff);/* LS of divisor */ - serial_out(&kdb_port_info, UART_DLM, t >> 8); /* MS of divisor */ - /* reset DLAB */ - serial_out(&kdb_port_info, UART_LCR, UART_LCR_WLEN8); - - return speed; -} - -int putDebugChar(char c) -{ - return generic_putDebugChar(c); -} - -char getDebugChar(void) -{ - return generic_getDebugChar(); -} - -int rs_putDebugChar(char c) -{ - - if (!kdb_port_info.state) { /* need to init device first */ - return 0; - } - - while ((serial_in(&kdb_port_info, UART_LSR) & UART_LSR_THRE) == 0) - ; - - serial_out(&kdb_port_info, UART_TX, c); - - return 1; -} - -char rs_getDebugChar(void) -{ - if (!kdb_port_info.state) { /* need to init device first */ - return 0; - } - - while (!(serial_in(&kdb_port_info, UART_LSR) & 1)) - ; - - return serial_in(&kdb_port_info, UART_RX); -} diff --git a/arch/mips/mti-malta/malta-setup.c b/arch/mips/mti-malta/malta-setup.c index e7cad54..dc78b89 100644 --- a/arch/mips/mti-malta/malta-setup.c +++ b/arch/mips/mti-malta/malta-setup.c @@ -199,10 +199,6 @@ void __init plat_mem_setup(void) */ enable_dma(4); -#ifdef CONFIG_KGDB - kgdb_config(); -#endif - #ifdef CONFIG_DMA_COHERENT if (mips_revision_sconid != MIPS_REVISION_SCON_BONITO) panic("Hardware DMA cache coherency not supported"); diff --git a/arch/mips/nxp/pnx8550/common/Makefile b/arch/mips/nxp/pnx8550/common/Makefile index 31cc1a5..dd9e7b1 100644 --- a/arch/mips/nxp/pnx8550/common/Makefile +++ b/arch/mips/nxp/pnx8550/common/Makefile @@ -24,6 +24,5 @@ obj-y := setup.o prom.o int.o reset.o time.o proc.o platform.o obj-$(CONFIG_PCI) += pci.o -obj-$(CONFIG_KGDB) += gdb_hook.o EXTRA_CFLAGS += -Werror diff --git a/arch/mips/nxp/pnx8550/common/gdb_hook.c b/arch/mips/nxp/pnx8550/common/gdb_hook.c deleted file mode 100644 index ad4624f..0000000 --- a/arch/mips/nxp/pnx8550/common/gdb_hook.c +++ /dev/null @@ -1,109 +0,0 @@ -/* - * Carsten Langgaard, carstenl@mips.com - * Copyright (C) 2000 MIPS Technologies, Inc. All rights reserved. - * - * ######################################################################## - * - * This program is free software; you can distribute it and/or modify it - * under the terms of the GNU General Public License (Version 2) as - * published by the Free Software Foundation. - * - * This program is distributed in the hope it will be useful, but WITHOUT - * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or - * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License - * for more details. - * - * You should have received a copy of the GNU General Public License along - * with this program; if not, write to the Free Software Foundation, Inc., - * 59 Temple Place - Suite 330, Boston MA 02111-1307, USA. - * - * ######################################################################## - * - * This is the interface to the remote debugger stub. - * - */ -#include <linux/types.h> -#include <linux/serial.h> -#include <linux/serialP.h> -#include <linux/serial_reg.h> -#include <linux/serial_ip3106.h> - -#include <asm/serial.h> -#include <asm/io.h> - -#include <uart.h> - -static struct serial_state rs_table[IP3106_NR_PORTS] = { -}; -static struct async_struct kdb_port_info = {0}; - -void rs_kgdb_hook(int tty_no) -{ - struct serial_state *ser = &rs_table[tty_no]; - - kdb_port_info.state = ser; - kdb_port_info.magic = SERIAL_MAGIC; - kdb_port_info.port = tty_no; - kdb_port_info.flags = ser->flags; - - /* - * Clear all interrupts - */ - /* Clear all the transmitter FIFO counters (pointer and status) */ - ip3106_lcr(UART_BASE, tty_no) |= IP3106_UART_LCR_TX_RST; - /* Clear all the receiver FIFO counters (pointer and status) */ - ip3106_lcr(UART_BASE, tty_no) |= IP3106_UART_LCR_RX_RST; - /* Clear all interrupts */ - ip3106_iclr(UART_BASE, tty_no) = IP3106_UART_INT_ALLRX | - IP3106_UART_INT_ALLTX; - - /* - * Now, initialize the UART - */ - ip3106_lcr(UART_BASE, tty_no) = IP3106_UART_LCR_8BIT; - ip3106_baud(UART_BASE, tty_no) = 5; // 38400 Baud -} - -int putDebugChar(char c) -{ - /* Wait until FIFO not full */ - while (((ip3106_fifo(UART_BASE, kdb_port_info.port) & IP3106_UART_FIFO_TXFIFO) >> 16) >= 16) - ; - /* Send one char */ - ip3106_fifo(UART_BASE, kdb_port_info.port) = c; - - return 1; -} - -char getDebugChar(void) -{ - char ch; - - /* Wait until there is a char in the FIFO */ - while (!((ip3106_fifo(UART_BASE, kdb_port_info.port) & - IP3106_UART_FIFO_RXFIFO) >> 8)) - ; - /* Read one char */ - ch = ip3106_fifo(UART_BASE, kdb_port_info.port) & - IP3106_UART_FIFO_RBRTHR; - /* Advance the RX FIFO read pointer */ - ip3106_lcr(UART_BASE, kdb_port_info.port) |= IP3106_UART_LCR_RX_NEXT; - return (ch); -} - -void rs_disable_debug_interrupts(void) -{ - ip3106_ien(UART_BASE, kdb_port_info.port) = 0; /* Disable all interrupts */ -} - -void rs_enable_debug_interrupts(void) -{ - /* Clear all the transmitter FIFO counters (pointer and status) */ - ip3106_lcr(UART_BASE, kdb_port_info.port) |= IP3106_UART_LCR_TX_RST; - /* Clear all the receiver FIFO counters (pointer and status) */ - ip3106_lcr(UART_BASE, kdb_port_info.port) |= IP3106_UART_LCR_RX_RST; - /* Clear all interrupts */ - ip3106_iclr(UART_BASE, kdb_port_info.port) = IP3106_UART_INT_ALLRX | - IP3106_UART_INT_ALLTX; - ip3106_ien(UART_BASE, kdb_port_info.port) = IP3106_UART_INT_ALLRX; /* Enable RX interrupts */ -} diff --git a/arch/mips/nxp/pnx8550/common/int.c b/arch/mips/nxp/pnx8550/common/int.c index aad0342..f080f11 100644 --- a/arch/mips/nxp/pnx8550/common/int.c +++ b/arch/mips/nxp/pnx8550/common/int.c @@ -34,7 +34,6 @@ #include <linux/module.h> #include <asm/io.h> -#include <asm/gdb-stub.h> #include <int.h> #include <uart.h> diff --git a/arch/mips/nxp/pnx8550/common/proc.c b/arch/mips/nxp/pnx8550/common/proc.c index 18b125e3..acf1fa8 100644 --- a/arch/mips/nxp/pnx8550/common/proc.c +++ b/arch/mips/nxp/pnx8550/common/proc.c @@ -22,7 +22,6 @@ #include <linux/random.h> #include <asm/io.h> -#include <asm/gdb-stub.h> #include <int.h> #include <uart.h> diff --git a/arch/mips/nxp/pnx8550/common/setup.c b/arch/mips/nxp/pnx8550/common/setup.c index 92d764c..2aed50f 100644 --- a/arch/mips/nxp/pnx8550/common/setup.c +++ b/arch/mips/nxp/pnx8550/common/setup.c @@ -47,7 +47,6 @@ extern void pnx8550_machine_halt(void); extern void pnx8550_machine_power_off(void); extern struct resource ioport_resource; extern struct resource iomem_resource; -extern void rs_kgdb_hook(int tty_no); extern char *prom_getcmdline(void); struct resource standard_io_resources[] = { @@ -142,16 +141,5 @@ void __init plat_mem_setup(void) ip3106_baud(UART_BASE, pnx8550_console_port) = 5; } -#ifdef CONFIG_KGDB - argptr = prom_getcmdline(); - if ((argptr = strstr(argptr, "kgdb=ttyS")) != NULL) { - int line; - argptr += strlen("kgdb=ttyS"); - line = *argptr == '0' ? 0 : 1; - rs_kgdb_hook(line); - pr_info("KGDB: Using ttyS%i for session, " - "please connect your debugger\n", line ? 1 : 0); - } -#endif return; } diff --git a/arch/mips/pmc-sierra/msp71xx/msp_serial.c b/arch/mips/pmc-sierra/msp71xx/msp_serial.c index 9de3430..f726162 100644 --- a/arch/mips/pmc-sierra/msp71xx/msp_serial.c +++ b/arch/mips/pmc-sierra/msp71xx/msp_serial.c @@ -38,68 +38,6 @@ #include <msp_int.h> #include <msp_regs.h> -#ifdef CONFIG_KGDB -/* - * kgdb uses serial port 1 so the console can remain on port 0. - * To use port 0 change the definition to read as follows: - * #define DEBUG_PORT_BASE KSEG1ADDR(MSP_UART0_BASE) - */ -#define DEBUG_PORT_BASE KSEG1ADDR(MSP_UART1_BASE) - -int putDebugChar(char c) -{ - volatile uint32_t *uart = (volatile uint32_t *)DEBUG_PORT_BASE; - uint32_t val = (uint32_t)c; - - local_irq_disable(); - while( !(uart[5] & 0x20) ); /* Wait for TXRDY */ - uart[0] = val; - while( !(uart[5] & 0x20) ); /* Wait for TXRDY */ - local_irq_enable(); - - return 1; -} - -char getDebugChar(void) -{ - volatile uint32_t *uart = (volatile uint32_t *)DEBUG_PORT_BASE; - uint32_t val; - - while( !(uart[5] & 0x01) ); /* Wait for RXRDY */ - val = uart[0]; - - return (char)val; -} - -void initDebugPort(unsigned int uartclk, unsigned int baudrate) -{ - unsigned int baud_divisor = (uartclk + 8 * baudrate)/(16 * baudrate); - - /* Enable FIFOs */ - writeb(UART_FCR_ENABLE_FIFO | UART_FCR_CLEAR_RCVR | - UART_FCR_CLEAR_XMIT | UART_FCR_TRIGGER_4, - (char *)DEBUG_PORT_BASE + (UART_FCR * 4)); - - /* Select brtc divisor */ - writeb(UART_LCR_DLAB, (char *)DEBUG_PORT_BASE + (UART_LCR * 4)); - - /* Store divisor lsb */ - writeb(baud_divisor, (char *)DEBUG_PORT_BASE + (UART_TX * 4)); - - /* Store divisor msb */ - writeb(baud_divisor >> 8, (char *)DEBUG_PORT_BASE + (UART_IER * 4)); - - /* Set 8N1 mode */ - writeb(UART_LCR_WLEN8, (char *)DEBUG_PORT_BASE + (UART_LCR * 4)); - - /* Disable flow control */ - writeb(0, (char *)DEBUG_PORT_BASE + (UART_MCR * 4)); - - /* Disable receive interrupt(!) */ - writeb(0, (char *)DEBUG_PORT_BASE + (UART_IER * 4)); -} -#endif - void __init msp_serial_setup(void) { char *s; @@ -139,17 +77,6 @@ void __init msp_serial_setup(void) case MACH_MSP7120_FPGA: /* Enable UART1 on MSP4200 and MSP7120 */ *GPIO_CFG2_REG = 0x00002299; - -#ifdef CONFIG_KGDB - /* Initialize UART1 for kgdb since PMON doesn't */ - if( DEBUG_PORT_BASE == KSEG1ADDR(MSP_UART1_BASE) ) { - if( mips_machtype == MACH_MSP4200_FPGA - || mips_machtype == MACH_MSP7120_FPGA ) - initDebugPort(uartclk, 19200); - else - initDebugPort(uartclk, 57600); - } -#endif break; default: diff --git a/arch/mips/pmc-sierra/yosemite/Makefile b/arch/mips/pmc-sierra/yosemite/Makefile index 8fd9a04..b16f95c 100644 --- a/arch/mips/pmc-sierra/yosemite/Makefile +++ b/arch/mips/pmc-sierra/yosemite/Makefile @@ -4,7 +4,6 @@ obj-y += irq.o prom.o py-console.o setup.o -obj-$(CONFIG_KGDB) += dbg_io.o obj-$(CONFIG_SMP) += smp.o EXTRA_CFLAGS += -Werror diff --git a/arch/mips/pmc-sierra/yosemite/dbg_io.c b/arch/mips/pmc-sierra/yosemite/dbg_io.c deleted file mode 100644 index 6362c70..0000000 --- a/arch/mips/pmc-sierra/yosemite/dbg_io.c +++ /dev/null @@ -1,180 +0,0 @@ -/* - * Copyright 2003 PMC-Sierra - * Author: Manish Lachwani (lachwani@pmc-sierra.com) - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your - * option) any later version. - * - * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED - * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF - * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN - * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, - * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT - * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF - * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON - * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT - * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF - * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - * - * You should have received a copy of the GNU General Public License along - * with this program; if not, write to the Free Software Foundation, Inc., - * 675 Mass Ave, Cambridge, MA 02139, USA. - */ - -/* - * Support for KGDB for the Yosemite board. We make use of single serial - * port to be used for KGDB as well as console. The second serial port - * seems to be having a problem. Single IRQ is allocated for both the - * ports. Hence, the interrupt routing code needs to figure out whether - * the interrupt came from channel A or B. - */ - -#include <asm/serial.h> - -/* - * Baud rate, Parity, Data and Stop bit settings for the - * serial port on the Yosemite. Note that the Early printk - * patch has been added. So, we should be all set to go - */ -#define YOSEMITE_BAUD_2400 2400 -#define YOSEMITE_BAUD_4800 4800 -#define YOSEMITE_BAUD_9600 9600 -#define YOSEMITE_BAUD_19200 19200 -#define YOSEMITE_BAUD_38400 38400 -#define YOSEMITE_BAUD_57600 57600 -#define YOSEMITE_BAUD_115200 115200 - -#define YOSEMITE_PARITY_NONE 0 -#define YOSEMITE_PARITY_ODD 0x08 -#define YOSEMITE_PARITY_EVEN 0x18 -#define YOSEMITE_PARITY_MARK 0x28 -#define YOSEMITE_PARITY_SPACE 0x38 - -#define YOSEMITE_DATA_5BIT 0x0 -#define YOSEMITE_DATA_6BIT 0x1 -#define YOSEMITE_DATA_7BIT 0x2 -#define YOSEMITE_DATA_8BIT 0x3 - -#define YOSEMITE_STOP_1BIT 0x0 -#define YOSEMITE_STOP_2BIT 0x4 - -/* This is crucial */ -#define SERIAL_REG_OFS 0x1 - -#define SERIAL_RCV_BUFFER 0x0 -#define SERIAL_TRANS_HOLD 0x0 -#define SERIAL_SEND_BUFFER 0x0 -#define SERIAL_INTR_ENABLE (1 * SERIAL_REG_OFS) -#define SERIAL_INTR_ID (2 * SERIAL_REG_OFS) -#define SERIAL_DATA_FORMAT (3 * SERIAL_REG_OFS) -#define SERIAL_LINE_CONTROL (3 * SERIAL_REG_OFS) -#define SERIAL_MODEM_CONTROL (4 * SERIAL_REG_OFS) -#define SERIAL_RS232_OUTPUT (4 * SERIAL_REG_OFS) -#define SERIAL_LINE_STATUS (5 * SERIAL_REG_OFS) -#define SERIAL_MODEM_STATUS (6 * SERIAL_REG_OFS) -#define SERIAL_RS232_INPUT (6 * SERIAL_REG_OFS) -#define SERIAL_SCRATCH_PAD (7 * SERIAL_REG_OFS) - -#define SERIAL_DIVISOR_LSB (0 * SERIAL_REG_OFS) -#define SERIAL_DIVISOR_MSB (1 * SERIAL_REG_OFS) - -/* - * Functions to READ and WRITE to serial port 0 - */ -#define SERIAL_READ(ofs) (*((volatile unsigned char*) \ - (TITAN_SERIAL_BASE + ofs))) - -#define SERIAL_WRITE(ofs, val) ((*((volatile unsigned char*) \ - (TITAN_SERIAL_BASE + ofs))) = val) - -/* - * Functions to READ and WRITE to serial port 1 - */ -#define SERIAL_READ_1(ofs) (*((volatile unsigned char*) \ - (TITAN_SERIAL_BASE_1 + ofs))) - -#define SERIAL_WRITE_1(ofs, val) ((*((volatile unsigned char*) \ - (TITAN_SERIAL_BASE_1 + ofs))) = val) - -/* - * Second serial port initialization - */ -void init_second_port(void) -{ - /* Disable Interrupts */ - SERIAL_WRITE_1(SERIAL_LINE_CONTROL, 0x0); - SERIAL_WRITE_1(SERIAL_INTR_ENABLE, 0x0); - - { - unsigned int divisor; - - SERIAL_WRITE_1(SERIAL_LINE_CONTROL, 0x80); - divisor = TITAN_SERIAL_BASE_BAUD / YOSEMITE_BAUD_115200; - SERIAL_WRITE_1(SERIAL_DIVISOR_LSB, divisor & 0xff); - - SERIAL_WRITE_1(SERIAL_DIVISOR_MSB, - (divisor & 0xff00) >> 8); - SERIAL_WRITE_1(SERIAL_LINE_CONTROL, 0x0); - } - - SERIAL_WRITE_1(SERIAL_DATA_FORMAT, YOSEMITE_DATA_8BIT | - YOSEMITE_PARITY_NONE | YOSEMITE_STOP_1BIT); - - /* Enable Interrupts */ - SERIAL_WRITE_1(SERIAL_INTR_ENABLE, 0xf); -} - -/* Initialize the serial port for KGDB debugging */ -void debugInit(unsigned int baud, unsigned char data, unsigned char parity, - unsigned char stop) -{ - /* Disable Interrupts */ - SERIAL_WRITE(SERIAL_LINE_CONTROL, 0x0); - SERIAL_WRITE(SERIAL_INTR_ENABLE, 0x0); - - { - unsigned int divisor; - - SERIAL_WRITE(SERIAL_LINE_CONTROL, 0x80); - - divisor = TITAN_SERIAL_BASE_BAUD / baud; - SERIAL_WRITE(SERIAL_DIVISOR_LSB, divisor & 0xff); - - SERIAL_WRITE(SERIAL_DIVISOR_MSB, (divisor & 0xff00) >> 8); - SERIAL_WRITE(SERIAL_LINE_CONTROL, 0x0); - } - - SERIAL_WRITE(SERIAL_DATA_FORMAT, data | parity | stop); -} - -static int remoteDebugInitialized = 0; - -unsigned char getDebugChar(void) -{ - if (!remoteDebugInitialized) { - remoteDebugInitialized = 1; - debugInit(YOSEMITE_BAUD_115200, - YOSEMITE_DATA_8BIT, - YOSEMITE_PARITY_NONE, YOSEMITE_STOP_1BIT); - } - - while ((SERIAL_READ(SERIAL_LINE_STATUS) & 0x1) == 0); - return SERIAL_READ(SERIAL_RCV_BUFFER); -} - -int putDebugChar(unsigned char byte) -{ - if (!remoteDebugInitialized) { - remoteDebugInitialized = 1; - debugInit(YOSEMITE_BAUD_115200, - YOSEMITE_DATA_8BIT, - YOSEMITE_PARITY_NONE, YOSEMITE_STOP_1BIT); - } - - while ((SERIAL_READ(SERIAL_LINE_STATUS) & 0x20) == 0); - SERIAL_WRITE(SERIAL_SEND_BUFFER, byte); - - return 1; -} diff --git a/arch/mips/pmc-sierra/yosemite/irq.c b/arch/mips/pmc-sierra/yosemite/irq.c index 4decc28..5f673eb 100644 --- a/arch/mips/pmc-sierra/yosemite/irq.c +++ b/arch/mips/pmc-sierra/yosemite/irq.c @@ -141,10 +141,6 @@ asmlinkage void plat_irq_dispatch(void) } } -#ifdef CONFIG_KGDB -extern void init_second_port(void); -#endif - /* * Initialize the next level interrupt handler */ @@ -156,11 +152,6 @@ void __init arch_init_irq(void) rm7k_cpu_irq_init(); rm9k_cpu_irq_init(); -#ifdef CONFIG_KGDB - /* At this point, initialize the second serial port */ - init_second_port(); -#endif - #ifdef CONFIG_GDB_CONSOLE register_gdb_console(); #endif diff --git a/arch/mips/sgi-ip22/ip22-setup.c b/arch/mips/sgi-ip22/ip22-setup.c index 5f389ee..896a1ef 100644 --- a/arch/mips/sgi-ip22/ip22-setup.c +++ b/arch/mips/sgi-ip22/ip22-setup.c @@ -20,7 +20,6 @@ #include <asm/irq.h> #include <asm/reboot.h> #include <asm/time.h> -#include <asm/gdb-stub.h> #include <asm/io.h> #include <asm/traps.h> #include <asm/sgialib.h> @@ -81,30 +80,6 @@ void __init plat_mem_setup(void) add_preferred_console("arc", 0, NULL); } -#ifdef CONFIG_KGDB - { - char *kgdb_ttyd = prom_getcmdline(); - - if ((kgdb_ttyd = strstr(kgdb_ttyd, "kgdb=ttyd")) != NULL) { - int line; - kgdb_ttyd += strlen("kgdb=ttyd"); - if (*kgdb_ttyd != '1' && *kgdb_ttyd != '2') - printk(KERN_INFO "KGDB: Uknown serial line /dev/ttyd%c" - ", falling back to /dev/ttyd1\n", *kgdb_ttyd); - line = *kgdb_ttyd == '2' ? 0 : 1; - printk(KERN_INFO "KGDB: Using serial line /dev/ttyd%d for " - "session\n", line ? 1 : 2); - rs_kgdb_hook(line); - - printk(KERN_INFO "KGDB: Using serial line /dev/ttyd%d for " - "session, please connect your debugger\n", line ? 1:2); - - kgdb_enabled = 1; - /* Breakpoints and stuff are in sgi_irq_setup() */ - } - } -#endif - #if defined(CONFIG_VT) && defined(CONFIG_SGI_NEWPORT_CONSOLE) { ULONG *gfxinfo; diff --git a/arch/mips/sgi-ip27/Makefile b/arch/mips/sgi-ip27/Makefile index e0a6871d..31f4931 100644 --- a/arch/mips/sgi-ip27/Makefile +++ b/arch/mips/sgi-ip27/Makefile @@ -7,7 +7,6 @@ obj-y := ip27-berr.o ip27-irq.o ip27-init.o ip27-klconfig.o ip27-klnuma.o \ ip27-xtalk.o obj-$(CONFIG_EARLY_PRINTK) += ip27-console.o -obj-$(CONFIG_KGDB) += ip27-dbgio.o obj-$(CONFIG_SMP) += ip27-smp.o EXTRA_CFLAGS += -Werror diff --git a/arch/mips/sgi-ip27/ip27-dbgio.c b/arch/mips/sgi-ip27/ip27-dbgio.c deleted file mode 100644 index 08fd88b..0000000 --- a/arch/mips/sgi-ip27/ip27-dbgio.c +++ /dev/null @@ -1,60 +0,0 @@ -/* - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your - * option) any later version. - * - * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED - * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF - * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN - * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, - * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT - * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF - * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON - * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT - * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF - * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - * - * You should have received a copy of the GNU General Public License along - * with this program; if not, write to the Free Software Foundation, Inc., - * 675 Mass Ave, Cambridge, MA 02139, USA. - * - * Copyright 2004 Ralf Baechle <ralf@linux-mips.org> - */ -#include <asm/sn/addrs.h> -#include <asm/sn/sn0/hub.h> -#include <asm/sn/klconfig.h> -#include <asm/sn/ioc3.h> -#include <asm/sn/sn_private.h> - -#include <linux/serial.h> -#include <linux/serial_core.h> -#include <linux/serial_reg.h> - -#define IOC3_CLK (22000000 / 3) -#define IOC3_FLAGS (0) - -static inline struct ioc3_uartregs *console_uart(void) -{ - struct ioc3 *ioc3; - - ioc3 = (struct ioc3 *)KL_CONFIG_CH_CONS_INFO(get_nasid())->memory_base; - - return &ioc3->sregs.uarta; -} - -unsigned char getDebugChar(void) -{ - struct ioc3_uartregs *uart = console_uart(); - - while ((uart->iu_lsr & UART_LSR_DR) == 0); - return uart->iu_rbr; -} - -void putDebugChar(unsigned char c) -{ - struct ioc3_uartregs *uart = console_uart(); - - while ((uart->iu_lsr & UART_LSR_THRE) == 0); - uart->iu_thr = c; -} diff --git a/arch/mips/sibyte/bcm1480/irq.c b/arch/mips/sibyte/bcm1480/irq.c index db372a0..a35818e 100644 --- a/arch/mips/sibyte/bcm1480/irq.c +++ b/arch/mips/sibyte/bcm1480/irq.c @@ -57,30 +57,6 @@ static void bcm1480_set_affinity(unsigned int irq, cpumask_t mask); extern unsigned long ht_eoi_space; #endif -#ifdef CONFIG_KGDB -#include <asm/gdb-stub.h> -extern void breakpoint(void); -static int kgdb_irq; -#ifdef CONFIG_GDB_CONSOLE -extern void register_gdb_console(void); -#endif - -/* kgdb is on when configured. Pass "nokgdb" kernel arg to turn it off */ -static int kgdb_flag = 1; -static int __init nokgdb(char *str) -{ - kgdb_flag = 0; - return 1; -} -__setup("nokgdb", nokgdb); - -/* Default to UART1 */ -int kgdb_port = 1; -#ifdef CONFIG_SERIAL_SB1250_DUART -extern char sb1250_duart_present[]; -#endif -#endif - static struct irq_chip bcm1480_irq_type = { .name = "BCM1480-IMR", .ack = ack_bcm1480_irq, @@ -355,61 +331,10 @@ void __init arch_init_irq(void) * does its own management of IP7. */ -#ifdef CONFIG_KGDB - imask |= STATUSF_IP6; -#endif /* Enable necessary IPs, disable the rest */ change_c0_status(ST0_IM, imask); - -#ifdef CONFIG_KGDB - if (kgdb_flag) { - kgdb_irq = K_BCM1480_INT_UART_0 + kgdb_port; - -#ifdef CONFIG_SERIAL_SB1250_DUART - sb1250_duart_present[kgdb_port] = 0; -#endif - /* Setup uart 1 settings, mapper */ - /* QQQ FIXME */ - __raw_writeq(M_DUART_IMR_BRK, IOADDR(A_DUART_IMRREG(kgdb_port))); - - __raw_writeq(IMR_IP6_VAL, - IOADDR(A_BCM1480_IMR_REGISTER(0, R_BCM1480_IMR_INTERRUPT_MAP_BASE_H) + - (kgdb_irq << 3))); - bcm1480_unmask_irq(0, kgdb_irq); - -#ifdef CONFIG_GDB_CONSOLE - register_gdb_console(); -#endif - printk("Waiting for GDB on UART port %d\n", kgdb_port); - set_debug_traps(); - breakpoint(); - } -#endif -} - -#ifdef CONFIG_KGDB - -#include <linux/delay.h> - -#define duart_out(reg, val) csr_out32(val, IOADDR(A_DUART_CHANREG(kgdb_port, reg))) -#define duart_in(reg) csr_in32(IOADDR(A_DUART_CHANREG(kgdb_port, reg))) - -static void bcm1480_kgdb_interrupt(void) -{ - /* - * Clear break-change status (allow some time for the remote - * host to stop the break, since we would see another - * interrupt on the end-of-break too) - */ - kstat.irqs[smp_processor_id()][kgdb_irq]++; - mdelay(500); - duart_out(R_DUART_CMD, V_DUART_MISC_CMD_RESET_BREAK_INT | - M_DUART_RX_EN | M_DUART_TX_EN); - set_async_breakpoint(&get_irq_regs()->cp0_epc); } -#endif /* CONFIG_KGDB */ - extern void bcm1480_mailbox_interrupt(void); static inline void dispatch_ip2(void) @@ -462,11 +387,6 @@ asmlinkage void plat_irq_dispatch(void) bcm1480_mailbox_interrupt(); #endif -#ifdef CONFIG_KGDB - else if (pending & CAUSEF_IP6) - bcm1480_kgdb_interrupt(); /* KGDB (uart 1) */ -#endif - else if (pending & CAUSEF_IP2) dispatch_ip2(); } diff --git a/arch/mips/sibyte/cfe/setup.c b/arch/mips/sibyte/cfe/setup.c index fd9604d..3de30f7 100644 --- a/arch/mips/sibyte/cfe/setup.c +++ b/arch/mips/sibyte/cfe/setup.c @@ -59,10 +59,6 @@ int cfe_cons_handle; extern unsigned long initrd_start, initrd_end; #endif -#ifdef CONFIG_KGDB -extern int kgdb_port; -#endif - static void __noreturn cfe_linux_exit(void *arg) { int warm = *(int *)arg; @@ -246,9 +242,6 @@ void __init prom_init(void) int argc = fw_arg0; char **envp = (char **) fw_arg2; int *prom_vec = (int *) fw_arg3; -#ifdef CONFIG_KGDB - char *arg; -#endif _machine_restart = cfe_linux_restart; _machine_halt = cfe_linux_halt; @@ -309,13 +302,6 @@ void __init prom_init(void) } } -#ifdef CONFIG_KGDB - if ((arg = strstr(arcs_cmdline, "kgdb=duart")) != NULL) - kgdb_port = (arg[10] == '0') ? 0 : 1; - else - kgdb_port = 1; -#endif - #ifdef CONFIG_BLK_DEV_INITRD { char *ptr; diff --git a/arch/mips/sibyte/sb1250/irq.c b/arch/mips/sibyte/sb1250/irq.c index eac9065..a515848 100644 --- a/arch/mips/sibyte/sb1250/irq.c +++ b/arch/mips/sibyte/sb1250/irq.c @@ -57,16 +57,6 @@ static void sb1250_set_affinity(unsigned int irq, cpumask_t mask); extern unsigned long ldt_eoi_space; #endif -#ifdef CONFIG_KGDB -static int kgdb_irq; - -/* Default to UART1 */ -int kgdb_port = 1; -#ifdef CONFIG_SERIAL_SB1250_DUART -extern char sb1250_duart_present[]; -#endif -#endif - static struct irq_chip sb1250_irq_type = { .name = "SB1250-IMR", .ack = ack_sb1250_irq, @@ -313,55 +303,10 @@ void __init arch_init_irq(void) * does its own management of IP7. */ -#ifdef CONFIG_KGDB - imask |= STATUSF_IP6; -#endif /* Enable necessary IPs, disable the rest */ change_c0_status(ST0_IM, imask); - -#ifdef CONFIG_KGDB - if (kgdb_flag) { - kgdb_irq = K_INT_UART_0 + kgdb_port; - -#ifdef CONFIG_SERIAL_SB1250_DUART - sb1250_duart_present[kgdb_port] = 0; -#endif - /* Setup uart 1 settings, mapper */ - __raw_writeq(M_DUART_IMR_BRK, - IOADDR(A_DUART_IMRREG(kgdb_port))); - - __raw_writeq(IMR_IP6_VAL, - IOADDR(A_IMR_REGISTER(0, - R_IMR_INTERRUPT_MAP_BASE) + - (kgdb_irq << 3))); - sb1250_unmask_irq(0, kgdb_irq); - } -#endif -} - -#ifdef CONFIG_KGDB - -#include <linux/delay.h> - -#define duart_out(reg, val) csr_out32(val, IOADDR(A_DUART_CHANREG(kgdb_port, reg))) -#define duart_in(reg) csr_in32(IOADDR(A_DUART_CHANREG(kgdb_port, reg))) - -static void sb1250_kgdb_interrupt(void) -{ - /* - * Clear break-change status (allow some time for the remote - * host to stop the break, since we would see another - * interrupt on the end-of-break too) - */ - kstat_this_cpu.irqs[kgdb_irq]++; - mdelay(500); - duart_out(R_DUART_CMD, V_DUART_MISC_CMD_RESET_BREAK_INT | - M_DUART_RX_EN | M_DUART_TX_EN); - set_async_breakpoint(&get_irq_regs()->cp0_epc); } -#endif /* CONFIG_KGDB */ - extern void sb1250_mailbox_interrupt(void); static inline void dispatch_ip2(void) @@ -407,11 +352,6 @@ asmlinkage void plat_irq_dispatch(void) sb1250_mailbox_interrupt(); #endif -#ifdef CONFIG_KGDB - else if (pending & CAUSEF_IP6) /* KGDB (uart 1) */ - sb1250_kgdb_interrupt(); -#endif - else if (pending & CAUSEF_IP2) dispatch_ip2(); else diff --git a/arch/mips/sibyte/swarm/Makefile b/arch/mips/sibyte/swarm/Makefile index 255d692..f18ba92 100644 --- a/arch/mips/sibyte/swarm/Makefile +++ b/arch/mips/sibyte/swarm/Makefile @@ -1,4 +1,3 @@ obj-y := setup.o rtc_xicor1241.o rtc_m41t81.o obj-$(CONFIG_I2C_BOARDINFO) += swarm-i2c.o -obj-$(CONFIG_KGDB) += dbg_io.o diff --git a/arch/mips/sibyte/swarm/dbg_io.c b/arch/mips/sibyte/swarm/dbg_io.c deleted file mode 100644 index b97ae30..0000000 --- a/arch/mips/sibyte/swarm/dbg_io.c +++ /dev/null @@ -1,76 +0,0 @@ -/* - * kgdb debug routines for SiByte boards. - * - * Copyright (C) 2001 MontaVista Software Inc. - * Author: Jun Sun, jsun@mvista.com or jsun@junsun.net - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your - * option) any later version. - * - */ - -/* -------------------- BEGINNING OF CONFIG --------------------- */ - -#include <linux/delay.h> -#include <asm/io.h> -#include <asm/sibyte/sb1250.h> -#include <asm/sibyte/sb1250_regs.h> -#include <asm/sibyte/sb1250_uart.h> -#include <asm/sibyte/sb1250_int.h> -#include <asm/addrspace.h> - -/* - * We use the second serial port for kgdb traffic. - * 115200, 8, N, 1. - */ - -#define BAUD_RATE 115200 -#define CLK_DIVISOR V_DUART_BAUD_RATE(BAUD_RATE) -#define DATA_BITS V_DUART_BITS_PER_CHAR_8 /* or 7 */ -#define PARITY V_DUART_PARITY_MODE_NONE /* or even */ -#define STOP_BITS M_DUART_STOP_BIT_LEN_1 /* or 2 */ - -static int duart_initialized = 0; /* 0: need to be init'ed by kgdb */ - -/* -------------------- END OF CONFIG --------------------- */ -extern int kgdb_port; - -#define duart_out(reg, val) csr_out32(val, IOADDR(A_DUART_CHANREG(kgdb_port, reg))) -#define duart_in(reg) csr_in32(IOADDR(A_DUART_CHANREG(kgdb_port, reg))) - -void putDebugChar(unsigned char c); -unsigned char getDebugChar(void); -static void -duart_init(int clk_divisor, int data, int parity, int stop) -{ - duart_out(R_DUART_MODE_REG_1, data | parity); - duart_out(R_DUART_MODE_REG_2, stop); - duart_out(R_DUART_CLK_SEL, clk_divisor); - - duart_out(R_DUART_CMD, M_DUART_RX_EN | M_DUART_TX_EN); /* enable rx and tx */ -} - -void -putDebugChar(unsigned char c) -{ - if (!duart_initialized) { - duart_initialized = 1; - duart_init(CLK_DIVISOR, DATA_BITS, PARITY, STOP_BITS); - } - while ((duart_in(R_DUART_STATUS) & M_DUART_TX_RDY) == 0); - duart_out(R_DUART_TX_HOLD, c); -} - -unsigned char -getDebugChar(void) -{ - if (!duart_initialized) { - duart_initialized = 1; - duart_init(CLK_DIVISOR, DATA_BITS, PARITY, STOP_BITS); - } - while ((duart_in(R_DUART_STATUS) & M_DUART_RX_RDY) == 0) ; - return duart_in(R_DUART_RX_HOLD); -} - diff --git a/arch/mips/txx9/Kconfig b/arch/mips/txx9/Kconfig index d1dd119..840fe75 100644 --- a/arch/mips/txx9/Kconfig +++ b/arch/mips/txx9/Kconfig @@ -60,7 +60,6 @@ config SOC_TX4927 select HW_HAS_PCI select IRQ_TXX9 select PCI_TX4927 - select SYS_SUPPORTS_KGDB select GPIO_TXX9 config SOC_TX4938 @@ -70,7 +69,6 @@ config SOC_TX4938 select HW_HAS_PCI select IRQ_TXX9 select PCI_TX4927 - select SYS_SUPPORTS_KGDB select GPIO_TXX9 config TOSHIBA_FPCIB0 diff --git a/arch/mips/txx9/generic/Makefile b/arch/mips/txx9/generic/Makefile index 57ed07b..9bb34af 100644 --- a/arch/mips/txx9/generic/Makefile +++ b/arch/mips/txx9/generic/Makefile @@ -8,6 +8,5 @@ obj-$(CONFIG_SOC_TX3927) += setup_tx3927.o irq_tx3927.o obj-$(CONFIG_SOC_TX4927) += mem_tx4927.o setup_tx4927.o irq_tx4927.o obj-$(CONFIG_SOC_TX4938) += mem_tx4927.o setup_tx4938.o irq_tx4938.o obj-$(CONFIG_TOSHIBA_FPCIB0) += smsc_fdc37m81x.o -obj-$(CONFIG_KGDB) += dbgio.o EXTRA_CFLAGS += -Werror diff --git a/arch/mips/txx9/generic/dbgio.c b/arch/mips/txx9/generic/dbgio.c deleted file mode 100644 index 33b9c67..0000000 --- a/arch/mips/txx9/generic/dbgio.c +++ /dev/null @@ -1,48 +0,0 @@ -/* - * linux/arch/mips/tx4938/common/dbgio.c - * - * kgdb interface for gdb - * - * Author: MontaVista Software, Inc. - * source@mvista.com - * - * Copyright 2005 MontaVista Software Inc. - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your - * option) any later version. - * - * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED - * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF - * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. - * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, - * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, - * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS - * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND - * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR - * TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE - * USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - * - * You should have received a copy of the GNU General Public License along - * with this program; if not, write to the Free Software Foundation, Inc., - * 675 Mass Ave, Cambridge, MA 02139, USA. - * - * Support for TX4938 in 2.6 - Hiroshi DOYU <Hiroshi_DOYU@montavista.co.jp> - */ - -#include <linux/types> - -extern u8 txx9_sio_kdbg_rd(void); -extern int txx9_sio_kdbg_wr( u8 ch ); - -u8 getDebugChar(void) -{ - return (txx9_sio_kdbg_rd()); -} - -int putDebugChar(u8 byte) -{ - return (txx9_sio_kdbg_wr(byte)); -} - diff --git a/arch/mips/txx9/jmr3927/Makefile b/arch/mips/txx9/jmr3927/Makefile index ba292c9..20d61ac 100644 --- a/arch/mips/txx9/jmr3927/Makefile +++ b/arch/mips/txx9/jmr3927/Makefile @@ -3,6 +3,5 @@ # obj-y += prom.o irq.o setup.o -obj-$(CONFIG_KGDB) += kgdb_io.o EXTRA_CFLAGS += -Werror diff --git a/arch/mips/txx9/jmr3927/kgdb_io.c b/arch/mips/txx9/jmr3927/kgdb_io.c deleted file mode 100644 index 5bd757e..0000000 --- a/arch/mips/txx9/jmr3927/kgdb_io.c +++ /dev/null @@ -1,105 +0,0 @@ -/* - * BRIEF MODULE DESCRIPTION - * Low level uart routines to directly access a TX[34]927 SIO. - * - * Copyright 2001 MontaVista Software Inc. - * Author: MontaVista Software, Inc. - * ahennessy@mvista.com or source@mvista.com - * - * Based on arch/mips/ddb5xxx/ddb5477/kgdb_io.c - * - * Copyright (C) 2000-2001 Toshiba Corporation - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your - * option) any later version. - * - * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED - * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF - * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN - * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, - * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT - * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF - * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON - * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT - * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF - * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - * - * You should have received a copy of the GNU General Public License along - * with this program; if not, write to the Free Software Foundation, Inc., - * 675 Mass Ave, Cambridge, MA 02139, USA. - */ - -#include <asm/txx9/jmr3927.h> - -#define TIMEOUT 0xffffff - -static int remoteDebugInitialized = 0; -static void debugInit(int baud); - -int putDebugChar(unsigned char c) -{ - int i = 0; - - if (!remoteDebugInitialized) { - remoteDebugInitialized = 1; - debugInit(38400); - } - - do { - slow_down(); - i++; - if (i>TIMEOUT) { - break; - } - } while (!(tx3927_sioptr(0)->cisr & TXx927_SICISR_TXALS)); - tx3927_sioptr(0)->tfifo = c; - - return 1; -} - -unsigned char getDebugChar(void) -{ - int i = 0; - int dicr; - char c; - - if (!remoteDebugInitialized) { - remoteDebugInitialized = 1; - debugInit(38400); - } - - /* diable RX int. */ - dicr = tx3927_sioptr(0)->dicr; - tx3927_sioptr(0)->dicr = 0; - - do { - slow_down(); - i++; - if (i>TIMEOUT) { - break; - } - } while (tx3927_sioptr(0)->disr & TXx927_SIDISR_UVALID) - ; - c = tx3927_sioptr(0)->rfifo; - - /* clear RX int. status */ - tx3927_sioptr(0)->disr &= ~TXx927_SIDISR_RDIS; - /* enable RX int. */ - tx3927_sioptr(0)->dicr = dicr; - - return c; -} - -static void debugInit(int baud) -{ - tx3927_sioptr(0)->lcr = 0x020; - tx3927_sioptr(0)->dicr = 0; - tx3927_sioptr(0)->disr = 0x4100; - tx3927_sioptr(0)->cisr = 0x014; - tx3927_sioptr(0)->fcr = 0; - tx3927_sioptr(0)->flcr = 0x02; - tx3927_sioptr(0)->bgr = ((JMR3927_BASE_BAUD + baud / 2) / baud) | - TXx927_SIBGR_BCLK_T0; -} |
