summaryrefslogtreecommitdiffstats
path: root/arch/mips
diff options
context:
space:
mode:
authorManuel Lauss <manuel.lauss@googlemail.com>2009-06-06 14:09:57 +0200
committerRalf Baechle <ralf@linux-mips.org>2009-06-17 11:06:29 +0100
commitb6c9f10517e99d806bebd04555801c787b9a3a23 (patch)
tree381146f79bd66dcd5b83635462c99c14d25b5469 /arch/mips
parentbb706b28bbd647c2fd7f22d6bf03a18b9552be05 (diff)
downloadop-kernel-dev-b6c9f10517e99d806bebd04555801c787b9a3a23.zip
op-kernel-dev-b6c9f10517e99d806bebd04555801c787b9a3a23.tar.gz
MIPS: Alchemy: xxs1500: use linux gpio api.
Replace a few GPIO register accesses in the board init code with calls to the gpio api. Signed-off-by: Manuel Lauss <manuel.lauss@gmail.com> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Diffstat (limited to 'arch/mips')
-rw-r--r--arch/mips/alchemy/xxs1500/board_setup.c21
1 files changed, 12 insertions, 9 deletions
diff --git a/arch/mips/alchemy/xxs1500/board_setup.c b/arch/mips/alchemy/xxs1500/board_setup.c
index a2634fa..4de2d48 100644
--- a/arch/mips/alchemy/xxs1500/board_setup.c
+++ b/arch/mips/alchemy/xxs1500/board_setup.c
@@ -23,6 +23,7 @@
* 675 Mass Ave, Cambridge, MA 02139, USA.
*/
+#include <linux/gpio.h>
#include <linux/init.h>
#include <linux/delay.h>
@@ -50,6 +51,9 @@ void __init board_setup(void)
}
#endif
+ alchemy_gpio1_input_enable();
+ alchemy_gpio2_enable();
+
/* Set multiple use pins (UART3/GPIO) to UART (it's used as UART too) */
pin_func = au_readl(SYS_PINFUNC) & ~SYS_PF_UR3;
pin_func |= SYS_PF_UR3;
@@ -65,20 +69,19 @@ void __init board_setup(void)
au_writel(0x01, UART3_ADDR + UART_MCR); /* UART_MCR_DTR is 0x01??? */
#ifdef CONFIG_PCMCIA_XXS1500
- /* Setup PCMCIA signals */
- au_writel(0, SYS_PININPUTEN);
-
/* GPIO 0, 1, and 4 are inputs */
- au_writel(1 | (1 << 1) | (1 << 4), SYS_TRIOUTCLR);
+ alchemy_gpio_direction_input(0);
+ alchemy_gpio_direction_input(1);
+ alchemy_gpio_direction_input(4);
- /* Enable GPIO2 if not already enabled */
- au_writel(1, GPIO2_ENABLE);
/* GPIO2 208/9/10/11 are inputs */
- au_writel((1 << 8) | (1 << 9) | (1 << 10) | (1 << 11), GPIO2_DIR);
+ alchemy_gpio_direction_input(208);
+ alchemy_gpio_direction_input(209);
+ alchemy_gpio_direction_input(210);
+ alchemy_gpio_direction_input(211);
/* Turn off power */
- au_writel((au_readl(GPIO2_PINSTATE) & ~(1 << 14)) | (1 << 30),
- GPIO2_OUTPUT);
+ alchemy_gpio_direction_output(214, 0);
#endif
#ifdef CONFIG_PCI
OpenPOWER on IntegriCloud