summaryrefslogtreecommitdiffstats
path: root/arch/mips
diff options
context:
space:
mode:
authorMaciej W. Rozycki <macro@linux-mips.org>2013-09-03 01:29:58 +0100
committerRalf Baechle <ralf@linux-mips.org>2013-09-03 14:44:02 +0200
commitafddce0cc9f22c72e6ee7350a0e90b04aaa470b2 (patch)
treea83f85367817aac24f098efb904a98ba9337fede /arch/mips
parent5b167c123b3c3582f62cf1896465019bc40fe526 (diff)
downloadop-kernel-dev-afddce0cc9f22c72e6ee7350a0e90b04aaa470b2.zip
op-kernel-dev-afddce0cc9f22c72e6ee7350a0e90b04aaa470b2.tar.gz
MIPS: R4k clock source initialization bug fix
This is a fix for a bug introduced with commit 447cdf2628b59aa513a42785450b348dced26d8a, submitted as archived here: http://www.linux-mips.org/cgi-bin/mesg.cgi?a=linux-mips&i=20080312235002.c717dde3.yoichi_yuasa%40tripeaks.co.jp regrettably with no further explanation. The issue is with the CP0 Count register read erratum present on R4000 and some R4400 processors. If this erratum is present, then a read from this register that happens around the time it reaches the value stored in the CP0 Compare register causes a CP0 timer interrupt that is supposed to happen when the values in the two registers match to be missed. The implication for the chips affected is the CP0 timer can be used either as a source of a timer interrupt (a clock event) or as a source of a high-resolution counter (a clock source), but not both at a time. The erratum does not affect timer interrupt operation itself, because in this case the CP0 Count register is only read while the timer interrupt has already been raised, while high-resolution counter references happen at random times. Additionally some systems apparently have issues with the timer interrupt line being routed externally and not following the usual CP0 Count/Compare semantics. In this case we don't want to use the R4k clock event. We've meant to address the erratum and the timer interrupt routing issue in time_init, however the commit referred to above broke our solution. What we currently have is we enable the R4k clock source if the R4k clock event initialization has succeeded (the timer is present and has no timer interrupt routing issue) or there is no CP0 Count register read erratum. Which gives the following boolean matrix: clock event | count erratum => clock source ------------+---------------+-------------- 0 | 0 | 1 (OK) 0 | 1 | 0 (bug!) -> no interference, could use 1 | 0 | 1 (OK) 1 | 1 | 1 (bug!) -> can't use, interference What we want instead is to enable the R4k clock source if there is no CP0 Count register read erratum (obviously) or the R4k clock event initialization has *failed* -- because in the latter case we won't be using the timer interrupt anyway, so we don't care about any interference CP0 Count reads might cause with the interrupt. This corresponds to the following boolean matrix: clock event | count erratum => clock source ------------+---------------+-------------- 0 | 0 | 1 0 | 1 | 1 1 | 0 | 1 1 | 1 | 0 This is implemented here, effectively reverting the problematic commit, and a short explanation is given next to code modified so that the rationale is known to future readers and confusion is prevented from happening here again. It is worth noting that mips_clockevent_init returns 0 upon success while cpu_has_mfc0_count_bug returns 0 upon failure. This is because the former function returns an error code while the latter returns a boolean value. To signify the difference I have therefore chosen to compare the result of the former call explicitly against 0. Signed-off-by: Maciej W. Rozycki <macro@linux-mips.org> Signed-off-by: Ralf Baechle <ralf@linux-mips.org> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/5799/
Diffstat (limited to 'arch/mips')
-rw-r--r--arch/mips/kernel/time.c10
1 files changed, 9 insertions, 1 deletions
diff --git a/arch/mips/kernel/time.c b/arch/mips/kernel/time.c
index 9d686bf..364d26a 100644
--- a/arch/mips/kernel/time.c
+++ b/arch/mips/kernel/time.c
@@ -121,6 +121,14 @@ void __init time_init(void)
{
plat_time_init();
- if (!mips_clockevent_init() || !cpu_has_mfc0_count_bug())
+ /*
+ * The use of the R4k timer as a clock event takes precedence;
+ * if reading the Count register might interfere with the timer
+ * interrupt, then we don't use the timer as a clock source.
+ * We may still use the timer as a clock source though if the
+ * timer interrupt isn't reliable; the interference doesn't
+ * matter then, because we don't use the interrupt.
+ */
+ if (mips_clockevent_init() != 0 || !cpu_has_mfc0_count_bug())
init_mips_clocksource();
}
OpenPOWER on IntegriCloud