TXx9: Add TX4938 ATA support (v3)

Add a helper routine to register tx4938ide driver and use it on
RBTX4938 board.

Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp>
Acked-by: Ralf Baechle <ralf@linux-mips.org>
Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>

1 files changed, 47 insertions, 0 deletions

diff --git a/arch/mips/txx9/generic/setup_tx4938.c b/arch/mips/txx9/generic/setup_tx4938.c
index af724e5..25819ff 100644
--- a/arch/mips/txx9/generic/setup_tx4938.c
+++ b/arch/mips/txx9/generic/setup_tx4938.c
@@ -16,6 +16,7 @@
 #include <linux/param.h>
 #include <linux/ptrace.h>
 #include <linux/mtd/physmap.h>
+#include <linux/platform_device.h>
 #include <asm/reboot.h>
 #include <asm/traps.h>
 #include <asm/txx9irq.h>
@@ -335,6 +336,52 @@ void __init tx4938_mtd_init(int ch)
 	txx9_physmap_flash_init(ch, start, size, &pdata);
 }
 
+void __init tx4938_ata_init(unsigned int irq, unsigned int shift, int tune)
+{
+	struct platform_device *pdev;
+	struct resource res[] = {
+		{
+			/* .start and .end are filled in later */
+			.flags = IORESOURCE_MEM,
+		}, {
+			.start = irq,
+			.flags = IORESOURCE_IRQ,
+		},
+	};
+	struct tx4938ide_platform_info pdata = {
+		.ioport_shift = shift,
+		/*
+		 * The IDE driver should not change bus timings if other ISA
+		 * devices existed.
+		 */
+		.gbus_clock = tune ? txx9_gbus_clock : 0,
+	};
+	u64 ebccr;
+	int i;
+
+	if ((__raw_readq(&tx4938_ccfgptr->pcfg) &
+	     (TX4938_PCFG_ATA_SEL | TX4938_PCFG_NDF_SEL))
+	    != TX4938_PCFG_ATA_SEL)
+		return;
+	for (i = 0; i < 8; i++) {
+		/* check EBCCRn.ISA, EBCCRn.BSZ, EBCCRn.ME */
+		ebccr = __raw_readq(&tx4938_ebuscptr->cr[i]);
+		if ((ebccr & 0x00f00008) == 0x00e00008)
+			break;
+	}
+	if (i == 8)
+		return;
+	pdata.ebus_ch = i;
+	res[0].start = ((ebccr >> 48) << 20) + 0x10000;
+	res[0].end = res[0].start + 0x20000 - 1;
+	pdev = platform_device_alloc("tx4938ide", -1);
+	if (!pdev ||
+	    platform_device_add_resources(pdev, res, ARRAY_SIZE(res)) ||
+	    platform_device_add_data(pdev, &pdata, sizeof(pdata)) ||
+	    platform_device_add(pdev))
+		platform_device_put(pdev);
+}
+
 static void __init tx4938_stop_unused_modules(void)
 {
 	__u64 pcfg, rst = 0, ckd = 0;