summaryrefslogtreecommitdiffstats
path: root/arch/mips/tx4938
diff options
context:
space:
mode:
authorAtsushi Nemoto <anemo@mba.ocn.ne.jp>2007-10-25 01:34:09 +0900
committerRalf Baechle <ralf@linux-mips.org>2007-10-29 19:35:35 +0000
commit229f773ef4ee852ad7bfbe8e1238a2c35b2baa6f (patch)
tree44d9dd3f2be845140024883db13ab879b4ce1f2e /arch/mips/tx4938
parent22df3f53e33d55335e1ef43d4e6ead54b379b3a2 (diff)
downloadop-kernel-dev-229f773ef4ee852ad7bfbe8e1238a2c35b2baa6f.zip
op-kernel-dev-229f773ef4ee852ad7bfbe8e1238a2c35b2baa6f.tar.gz
[MIPS] txx9tmr clockevent/clocksource driver
Convert jmr3927_clock_event_device to more generic txx9tmr_clock_event_device which supports one-shot mode. The txx9tmr_clock_event_device can be used for TX49 too if the cp0 timer interrupt was not available. Convert jmr3927_hpt_read to txx9_clocksource driver which does not depends jiffies anymore. The txx9_clocksource itself can be used for TX49, but normally TX49 uses higher precision clocksource_mips. Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Diffstat (limited to 'arch/mips/tx4938')
-rw-r--r--arch/mips/tx4938/toshiba_rbtx4938/setup.c19
1 files changed, 7 insertions, 12 deletions
diff --git a/arch/mips/tx4938/toshiba_rbtx4938/setup.c b/arch/mips/tx4938/toshiba_rbtx4938/setup.c
index ceecaf4..4a81523 100644
--- a/arch/mips/tx4938/toshiba_rbtx4938/setup.c
+++ b/arch/mips/tx4938/toshiba_rbtx4938/setup.c
@@ -26,6 +26,7 @@
#include <asm/reboot.h>
#include <asm/irq.h>
#include <asm/time.h>
+#include <asm/txx9tmr.h>
#include <asm/uaccess.h>
#include <asm/io.h>
#include <asm/bootinfo.h>
@@ -773,15 +774,8 @@ void __init tx4938_board_setup(void)
}
/* TMR */
- /* disable all timers */
- for (i = 0; i < TX4938_NR_TMR; i++) {
- tx4938_tmrptr(i)->tcr = 0x00000020;
- tx4938_tmrptr(i)->tisr = 0;
- tx4938_tmrptr(i)->cpra = 0xffffffff;
- tx4938_tmrptr(i)->itmr = 0;
- tx4938_tmrptr(i)->ccdr = 0;
- tx4938_tmrptr(i)->pgmr = 0;
- }
+ for (i = 0; i < TX4938_NR_TMR; i++)
+ txx9_tmr_init(TX4938_TMR_REG(i) & 0xfffffffffULL);
/* enable DMA */
TX4938_WR64(0xff1fb150, TX4938_DMA_MCR_MSTEN);
@@ -852,12 +846,13 @@ void tx4938_report_pcic_status(void)
#endif /* CONFIG_PCI */
-/* We use onchip r4k counter or TMR timer as our system wide timer
- * interrupt running at 100HZ. */
-
void __init plat_time_init(void)
{
mips_hpt_frequency = txx9_cpu_clock / 2;
+ if (tx4938_ccfgptr->ccfg & TX4938_CCFG_TINTDIS)
+ txx9_clockevent_init(TX4938_TMR_REG(0) & 0xfffffffffULL,
+ TXX9_IRQ_BASE + TX4938_IR_TMR(0),
+ txx9_gbus_clock / 2);
}
void __init toshiba_rbtx4938_setup(void)
OpenPOWER on IntegriCloud