summaryrefslogtreecommitdiffstats
path: root/arch/mips/sni
diff options
context:
space:
mode:
authorRalf Baechle <ralf@linux-mips.org>2006-04-03 17:56:36 +0100
committerRalf Baechle <ralf@linux-mips.org>2006-04-19 04:14:21 +0200
commite4ac58afdfac792c0583af30dbd9eae53e24c78b (patch)
tree7517bef2c515fc630e4d3d238867b91cde96f558 /arch/mips/sni
parentd35d473c25d43d7db3e5e18b66d558d2a631cca8 (diff)
downloadop-kernel-dev-e4ac58afdfac792c0583af30dbd9eae53e24c78b.zip
op-kernel-dev-e4ac58afdfac792c0583af30dbd9eae53e24c78b.tar.gz
[MIPS] Rewrite all the assembler interrupt handlers to C.
Saves like 1,600 lines of code, is way easier to debug, compilers frequently do a better job than the cut and paste type of handlers many boards had. And finally having all the stuff done in a single place also means alot of bug potencial for the MT ASE is gone. The only surviving handler in assembler is the DECstation one; I hope Maciej will rewrite it. Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Diffstat (limited to 'arch/mips/sni')
-rw-r--r--arch/mips/sni/Makefile2
-rw-r--r--arch/mips/sni/int-handler.S106
-rw-r--r--arch/mips/sni/irq.c37
3 files changed, 28 insertions, 117 deletions
diff --git a/arch/mips/sni/Makefile b/arch/mips/sni/Makefile
index 1e5676e..9c7eaa5 100644
--- a/arch/mips/sni/Makefile
+++ b/arch/mips/sni/Makefile
@@ -2,6 +2,6 @@
# Makefile for the SNI specific part of the kernel
#
-obj-y += int-handler.o irq.o pcimt_scache.o reset.o setup.o
+obj-y += irq.o pcimt_scache.o reset.o setup.o
EXTRA_AFLAGS := $(CFLAGS)
diff --git a/arch/mips/sni/int-handler.S b/arch/mips/sni/int-handler.S
deleted file mode 100644
index 2cdc09f..0000000
--- a/arch/mips/sni/int-handler.S
+++ /dev/null
@@ -1,106 +0,0 @@
-/*
- * SNI RM200 PCI specific interrupt handler code.
- *
- * Copyright (C) 1994, 95, 96, 97, 98, 1999, 2000, 01 by Ralf Baechle
- */
-#include <asm/asm.h>
-#include <asm/mipsregs.h>
-#include <asm/regdef.h>
-#include <asm/sni.h>
-#include <asm/stackframe.h>
-
-/*
- * The PCI ASIC has the nasty property that it may delay writes if it is busy.
- * As a consequence from writes that have not graduated when we exit from the
- * interrupt handler we might catch a spurious interrupt. To avoid this we
- * force the PCI ASIC to graduate all writes by executing a read from the
- * PCI bus.
- */
- .set noreorder
- .set noat
- .align 5
- NESTED(sni_rm200_pci_handle_int, PT_SIZE, sp)
- SAVE_ALL
- CLI
- .set at
-
- /* Blinken light ... */
- lb t0, led_cache
- addiu t0, 1
- sb t0, led_cache
- sb t0, PCIMT_CSLED # write only register
- .data
-led_cache: .byte 0
- .text
-
- mfc0 t0, CP0_STATUS
- mfc0 t1, CP0_CAUSE
- and t0, t1
-
- andi t1, t0, 0x0800 # hardware interrupt 1
- bnez t1, _hwint1
- andi t1, t0, 0x4000 # hardware interrupt 4
- bnez t1, _hwint4
- andi t1, t0, 0x2000 # hardware interrupt 3
- bnez t1, _hwint3
- andi t1, t0, 0x1000 # hardware interrupt 2
- bnez t1, _hwint2
- andi t1, t0, 0x8000 # hardware interrupt 5
- bnez t1, _hwint5
- andi t1, t0, 0x0400 # hardware interrupt 0
- bnez t1, _hwint0
- nop
-
- j restore_all # spurious interrupt
- nop
-
- ##############################################################################
-
-/* hwint0 should deal with MP agent, ASIC PCI, EISA NMI and debug
- button interrupts. */
-_hwint0: jal pciasic_hwint0
- move a0, sp
- j ret_from_irq
- nop
-
-/*
- * hwint 1 deals with EISA and SCSI interrupts
- */
-_hwint1: jal pciasic_hwint1
- move a0, sp
- j ret_from_irq
- nop
-
-
-/*
- * This interrupt was used for the com1 console on the first prototypes;
- * it's unsed otherwise
- */
-_hwint2: jal pciasic_hwint2
- move a0, sp
- j ret_from_irq
- nop
-
-/*
- * hwint 3 are the PCI interrupts A - D
- */
-_hwint3: jal pciasic_hwint3
- move a0, sp
- j ret_from_irq
- nop
-
-/*
- * hwint 4 is used for only the onboard PCnet 32.
- */
-_hwint4: jal pciasic_hwint4
- move a0, sp
- j ret_from_irq
- nop
-
-/* hwint5 is the r4k count / compare interrupt */
-_hwint5: jal pciasic_hwint5
- move a0, sp
- j ret_from_irq
- nop
-
- END(sni_rm200_pci_handle_int)
diff --git a/arch/mips/sni/irq.c b/arch/mips/sni/irq.c
index 952038a..7365b48 100644
--- a/arch/mips/sni/irq.c
+++ b/arch/mips/sni/irq.c
@@ -19,8 +19,6 @@
DEFINE_SPINLOCK(pciasic_lock);
-extern asmlinkage void sni_rm200_pci_handle_int(void);
-
static void enable_pciasic_irq(unsigned int irq)
{
unsigned int mask = 1 << (irq - PCIMT_IRQ_INT2);
@@ -71,20 +69,20 @@ static struct hw_interrupt_type pciasic_irq_type = {
* hwint0 should deal with MP agent, ASIC PCI, EISA NMI and debug
* button interrupts. Later ...
*/
-void pciasic_hwint0(struct pt_regs *regs)
+static void pciasic_hwint0(struct pt_regs *regs)
{
panic("Received int0 but no handler yet ...");
}
/* This interrupt was used for the com1 console on the first prototypes. */
-void pciasic_hwint2(struct pt_regs *regs)
+static void pciasic_hwint2(struct pt_regs *regs)
{
/* I think this shouldn't happen on production machines. */
panic("hwint2 and no handler yet");
}
/* hwint5 is the r4k count / compare interrupt */
-void pciasic_hwint5(struct pt_regs *regs)
+static void pciasic_hwint5(struct pt_regs *regs)
{
panic("hwint5 and no handler yet");
}
@@ -105,7 +103,7 @@ static unsigned int ls1bit8(unsigned int x)
*
* The EISA_INT bit in CSITPEND is high active, all others are low active.
*/
-void pciasic_hwint1(struct pt_regs *regs)
+static void pciasic_hwint1(struct pt_regs *regs)
{
u8 pend = *(volatile char *)PCIMT_CSITPEND;
unsigned long flags;
@@ -135,7 +133,7 @@ void pciasic_hwint1(struct pt_regs *regs)
/*
* hwint 3 should deal with the PCI A - D interrupts,
*/
-void pciasic_hwint3(struct pt_regs *regs)
+static void pciasic_hwint3(struct pt_regs *regs)
{
u8 pend = *(volatile char *)PCIMT_CSITPEND;
int irq;
@@ -150,13 +148,34 @@ void pciasic_hwint3(struct pt_regs *regs)
/*
* hwint 4 is used for only the onboard PCnet 32.
*/
-void pciasic_hwint4(struct pt_regs *regs)
+static void pciasic_hwint4(struct pt_regs *regs)
{
clear_c0_status(IE_IRQ4);
do_IRQ(PCIMT_IRQ_ETHERNET, regs);
set_c0_status(IE_IRQ4);
}
+asmlinkage void plat_irq_dispatch(struct pt_regs *regs)
+{
+ unsigned int pending = read_c0_status() & read_c0_cause();
+ static unsigned char led_cache;
+
+ *(volatile unsigned char *) PCIMT_CSLED = ++led_cache;
+
+ if (pending & 0x0800)
+ pciasic_hwint1(regs);
+ else if (pending & 0x4000)
+ pciasic_hwint4(regs);
+ else if (pending & 0x2000)
+ pciasic_hwint3(regs);
+ else if (pending & 0x1000)
+ pciasic_hwint2(regs);
+ else if (pending & 0x8000)
+ pciasic_hwint5(regs);
+ else if (pending & 0x0400)
+ pciasic_hwint0(regs);
+}
+
void __init init_pciasic(void)
{
unsigned long flags;
@@ -176,8 +195,6 @@ void __init arch_init_irq(void)
{
int i;
- set_except_vector(0, sni_rm200_pci_handle_int);
-
init_i8259_irqs(); /* Integrated i8259 */
init_pciasic();
OpenPOWER on IntegriCloud