[PATCH] mips: nuke trailing whitespace

Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

6 files changed, 14 insertions, 14 deletions

diff --git a/arch/mips/sgi-ip22/ip22-eisa.c b/arch/mips/sgi-ip22/ip22-eisa.c
index 0ab4abf..fa0e719 100644
--- a/arch/mips/sgi-ip22/ip22-eisa.c
+++ b/arch/mips/sgi-ip22/ip22-eisa.c
@@ -242,7 +242,7 @@ int __init ip22_eisa_init(void)
 	int i, c;
 	char *str;
 	u8 *slot_addr;
-	
+
 	if (!(sgimc->systemid & SGIMC_SYSID_EPRESENT)) {
 		printk(KERN_INFO "EISA: bus not present.\n");
 		return 1;
diff --git a/arch/mips/sgi-ip22/ip22-hpc.c b/arch/mips/sgi-ip22/ip22-hpc.c
index c0afecc..5c00cdd 100644
--- a/arch/mips/sgi-ip22/ip22-hpc.c
+++ b/arch/mips/sgi-ip22/ip22-hpc.c
@@ -49,7 +49,7 @@ void __init sgihpc_init(void)
 		sgint = &sgioc->int3;
 		system_type = "SGI Indy";
 	}
-	
+
 	sgi_ioc_reset = (SGIOC_RESET_PPORT | SGIOC_RESET_KBDMOUSE |
 			 SGIOC_RESET_EISA | SGIOC_RESET_ISDN |
 			 SGIOC_RESET_LC0OFF);
diff --git a/arch/mips/sgi-ip22/ip22-int.c b/arch/mips/sgi-ip22/ip22-int.c
index ea2844d..d16fb43 100644
--- a/arch/mips/sgi-ip22/ip22-int.c
+++ b/arch/mips/sgi-ip22/ip22-int.c
@@ -28,7 +28,7 @@
 /* #define DEBUG_SGINT */
 
 /* So far nothing hangs here */
-#undef USE_LIO3_IRQ 
+#undef USE_LIO3_IRQ
 
 struct sgint_regs *sgint;
 
@@ -272,32 +272,32 @@ void indy_buserror_irq(struct pt_regs *regs)
 	irq_exit();
 }
 
-static struct irqaction local0_cascade = { 
+static struct irqaction local0_cascade = {
 	.handler	= no_action,
 	.flags		= SA_INTERRUPT,
 	.name		= "local0 cascade",
 };
 
-static struct irqaction local1_cascade = { 
+static struct irqaction local1_cascade = {
 	.handler	= no_action,
 	.flags		= SA_INTERRUPT,
 	.name		= "local1 cascade",
 };
 
-static struct irqaction buserr = { 
+static struct irqaction buserr = {
 	.handler	= no_action,
 	.flags		= SA_INTERRUPT,
 	.name		= "Bus Error",
 };
 
-static struct irqaction map0_cascade = { 
+static struct irqaction map0_cascade = {
 	.handler	= no_action,
 	.flags		= SA_INTERRUPT,
 	.name		= "mapable0 cascade",
 };
 
 #ifdef USE_LIO3_IRQ
-static struct irqaction map1_cascade = { 
+static struct irqaction map1_cascade = {
 	.handler	= no_action,
 	.flags		= SA_INTERRUPT,
 	.name		= "mapable1 cascade",
diff --git a/arch/mips/sgi-ip22/ip22-nvram.c b/arch/mips/sgi-ip22/ip22-nvram.c
index de43e86..fd29fd4 100644
--- a/arch/mips/sgi-ip22/ip22-nvram.c
+++ b/arch/mips/sgi-ip22/ip22-nvram.c
@@ -39,7 +39,7 @@
 	*ptr |= EEPROM_CSEL;	\
 	*ptr |= EEPROM_ECLK; })
 
-		
+
 #define eeprom_cs_off(ptr) ({	\
 	*ptr &= ~EEPROM_ECLK;	\
 	*ptr &= ~EEPROM_CSEL;	\
@@ -50,7 +50,7 @@
 /*
  * clock in the nvram command and the register number. For the
  * national semiconductor nv ram chip the op code is 3 bits and
- * the address is 6/8 bits. 
+ * the address is 6/8 bits.
  */
 static inline void eeprom_cmd(volatile unsigned int *ctrl, unsigned cmd,
 			      unsigned reg)
@@ -90,7 +90,7 @@ unsigned short ip22_eeprom_read(volatile unsigned int *ctrl, int reg)
 		if (*ctrl & EEPROM_DATI)
 			res |= 1;
 	}
-		
+
 	eeprom_cs_off(ctrl);
 
 	return res;
@@ -113,7 +113,7 @@ unsigned short ip22_nvram_read(int reg)
 		reg <<= 1;
 		tmp = hpc3c0->bbram[reg++] & 0xff;
 		return (tmp << 8) | (hpc3c0->bbram[reg] & 0xff);
-	}		
+	}
 }
 
 EXPORT_SYMBOL(ip22_nvram_read);
diff --git a/arch/mips/sgi-ip22/ip22-reset.c b/arch/mips/sgi-ip22/ip22-reset.c
index ed5c60a..214ffd2 100644
--- a/arch/mips/sgi-ip22/ip22-reset.c
+++ b/arch/mips/sgi-ip22/ip22-reset.c
@@ -185,7 +185,7 @@ static irqreturn_t panel_int(int irq, void *dev_id, struct pt_regs *regs)
 		add_timer(&debounce_timer);
 	}
 
-	/* Power button was pressed 
+	/* Power button was pressed
 	 * ioc.ps page 22: "The Panel Register is called Power Control by Full
 	 * House. Only lowest 2 bits are used. Guiness uses upper four bits
 	 * for volume control". This is not true, all bits are pulled high
diff --git a/arch/mips/sgi-ip22/ip22-time.c b/arch/mips/sgi-ip22/ip22-time.c
index 173f768..df9b569 100644
--- a/arch/mips/sgi-ip22/ip22-time.c
+++ b/arch/mips/sgi-ip22/ip22-time.c
@@ -126,7 +126,7 @@ static __init void indy_time_init(void)
 	unsigned long r4k_ticks[3];
 	unsigned long r4k_tick;
 
-	/* 
+	/*
 	 * Figure out the r4k offset, the algorithm is very simple and works in
 	 * _all_ cases as long as the 8254 counter register itself works ok (as
 	 * an interrupt driving timer it does not because of bug, this is why