Merge branch 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus

Pull MIPS updates from Ralf Baechle:

 - More work on DT support for various platforms

 - Various fixes that were to late to make it straight into 3.9

 - Improved platform support, in particular the Netlogic XLR and
   BCM63xx, and the SEAD3 and Malta eval boards.

 - Support for several Ralink SOC families.

 - Complete support for the microMIPS ASE which basically reencodes the
   existing MIPS32/MIPS64 ISA to use non-constant size instructions.

 - Some fallout from LTO work which remove old cruft and will generally
   make the MIPS kernel easier to maintain and resistant to compiler
   optimization, even in absence of LTO.

 - KVM support.  While MIPS has announced hardware virtualization
   extensions this KVM extension uses trap and emulate mode for
   virtualization of MIPS32.  More KVM work to add support for VZ
   hardware virtualizaiton extensions and MIPS64 will probably already
   be merged for 3.11.

Most of this has been sitting in -next for a long time.  All defconfigs
have been build or run time tested except three for which fixes are being
sent by other maintainers.

Semantic conflict with kvm updates done as per Ralf

* 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus: (118 commits)
  MIPS: Add new GIC clockevent driver.
  MIPS: Formatting clean-ups for clocksources.
  MIPS: Refactor GIC clocksource code.
  MIPS: Move 'gic_frequency' to common location.
  MIPS: Move 'gic_present' to common location.
  MIPS: MIPS16e: Add unaligned access support.
  MIPS: MIPS16e: Support handling of delay slots.
  MIPS: MIPS16e: Add instruction formats.
  MIPS: microMIPS: Optimise 'strnlen' core library function.
  MIPS: microMIPS: Optimise 'strlen' core library function.
  MIPS: microMIPS: Optimise 'strncpy' core library function.
  MIPS: microMIPS: Optimise 'memset' core library function.
  MIPS: microMIPS: Add configuration option for microMIPS kernel.
  MIPS: microMIPS: Disable LL/SC and fix linker bug.
  MIPS: microMIPS: Add vdso support.
  MIPS: microMIPS: Add unaligned access support.
  MIPS: microMIPS: Support handling of delay slots.
  MIPS: microMIPS: Add support for exception handling.
  MIPS: microMIPS: Floating point support.
  MIPS: microMIPS: Fix macro naming in micro-assembler.
  ...

20 files changed, 1019 insertions, 66 deletions

diff --git a/arch/mips/ralink/Kconfig b/arch/mips/ralink/Kconfig
index a0b0197..026e823 100644
--- a/arch/mips/ralink/Kconfig
+++ b/arch/mips/ralink/Kconfig
@@ -6,12 +6,23 @@ choice
 	help
 	  Select Ralink MIPS SoC type.
 
+	config SOC_RT288X
+		bool "RT288x"
+
 	config SOC_RT305X
 		bool "RT305x"
 		select USB_ARCH_HAS_HCD
 		select USB_ARCH_HAS_OHCI
 		select USB_ARCH_HAS_EHCI
 
+	config SOC_RT3883
+		bool "RT3883"
+		select USB_ARCH_HAS_OHCI
+		select USB_ARCH_HAS_EHCI
+
+	config SOC_MT7620
+		bool "MT7620"
+
 endchoice
 
 choice
@@ -23,10 +34,22 @@ choice
 	config DTB_RT_NONE
 		bool "None"
 
+	config DTB_RT2880_EVAL
+		bool "RT2880 eval kit"
+		depends on SOC_RT288X
+
 	config DTB_RT305X_EVAL
 		bool "RT305x eval kit"
 		depends on SOC_RT305X
 
+	config DTB_RT3883_EVAL
+		bool "RT3883 eval kit"
+		depends on SOC_RT3883
+
+	config DTB_MT7620A_EVAL
+		bool "MT7620A eval kit"
+		depends on SOC_MT7620
+
 endchoice
 
 endif
diff --git a/arch/mips/ralink/Makefile b/arch/mips/ralink/Makefile
index 939757f..38cf1a8 100644
--- a/arch/mips/ralink/Makefile
+++ b/arch/mips/ralink/Makefile
@@ -8,7 +8,10 @@
 
 obj-y := prom.o of.o reset.o clk.o irq.o
 
+obj-$(CONFIG_SOC_RT288X) += rt288x.o
 obj-$(CONFIG_SOC_RT305X) += rt305x.o
+obj-$(CONFIG_SOC_RT3883) += rt3883.o
+obj-$(CONFIG_SOC_MT7620) += mt7620.o
 
 obj-$(CONFIG_EARLY_PRINTK) += early_printk.o
 
diff --git a/arch/mips/ralink/Platform b/arch/mips/ralink/Platform
index 6babd65..cda4b66 100644
--- a/arch/mips/ralink/Platform
+++ b/arch/mips/ralink/Platform
@@ -5,6 +5,24 @@ core-$(CONFIG_RALINK)		+= arch/mips/ralink/
 cflags-$(CONFIG_RALINK)		+= -I$(srctree)/arch/mips/include/asm/mach-ralink
 
 #
+# Ralink RT288x
+#
+load-$(CONFIG_SOC_RT288X)	+= 0xffffffff88000000
+cflags-$(CONFIG_SOC_RT288X)	+= -I$(srctree)/arch/mips/include/asm/mach-ralink/rt288x
+
+#
 # Ralink RT305x
 #
 load-$(CONFIG_SOC_RT305X)	+= 0xffffffff80000000
+cflags-$(CONFIG_SOC_RT305X)	+= -I$(srctree)/arch/mips/include/asm/mach-ralink/rt305x
+
+#
+# Ralink RT3883
+#
+load-$(CONFIG_SOC_RT3883)	+= 0xffffffff80000000
+cflags-$(CONFIG_SOC_RT3883)	+= -I$(srctree)/arch/mips/include/asm/mach-ralink/rt3883
+
+#
+# Ralink MT7620
+#
+load-$(CONFIG_SOC_MT7620)	+= 0xffffffff80000000
diff --git a/arch/mips/ralink/common.h b/arch/mips/ralink/common.h
index 3009903..83144c3f 100644
--- a/arch/mips/ralink/common.h
+++ b/arch/mips/ralink/common.h
@@ -22,13 +22,22 @@ struct ralink_pinmux {
 	struct ralink_pinmux_grp *mode;
 	struct ralink_pinmux_grp *uart;
 	int uart_shift;
+	u32 uart_mask;
 	void (*wdt_reset)(void);
+	struct ralink_pinmux_grp *pci;
+	int pci_shift;
+	u32 pci_mask;
 };
-extern struct ralink_pinmux gpio_pinmux;
+extern struct ralink_pinmux rt_gpio_pinmux;
 
 struct ralink_soc_info {
 	unsigned char sys_type[RAMIPS_SYS_TYPE_LEN];
 	unsigned char *compatible;
+
+	unsigned long mem_base;
+	unsigned long mem_size;
+	unsigned long mem_size_min;
+	unsigned long mem_size_max;
 };
 extern struct ralink_soc_info soc_info;
 
diff --git a/arch/mips/ralink/dts/Makefile b/arch/mips/ralink/dts/Makefile
index 1a69fb3..18194fa 100644
--- a/arch/mips/ralink/dts/Makefile
+++ b/arch/mips/ralink/dts/Makefile
@@ -1 +1,4 @@
+obj-$(CONFIG_DTB_RT2880_EVAL) := rt2880_eval.dtb.o
 obj-$(CONFIG_DTB_RT305X_EVAL) := rt3052_eval.dtb.o
+obj-$(CONFIG_DTB_RT3883_EVAL) := rt3883_eval.dtb.o
+obj-$(CONFIG_DTB_MT7620A_EVAL) := mt7620a_eval.dtb.o
diff --git a/arch/mips/ralink/dts/mt7620a.dtsi b/arch/mips/ralink/dts/mt7620a.dtsi
new file mode 100644
index 0000000..08bf24f
--- /dev/null
+++ b/arch/mips/ralink/dts/mt7620a.dtsi
@@ -0,0 +1,58 @@
+/ {
+	#address-cells = <1>;
+	#size-cells = <1>;
+	compatible = "ralink,mtk7620a-soc";
+
+	cpus {
+		cpu@0 {
+			compatible = "mips,mips24KEc";
+		};
+	};
+
+	cpuintc: cpuintc@0 {
+		#address-cells = <0>;
+		#interrupt-cells = <1>;
+		interrupt-controller;
+		compatible = "mti,cpu-interrupt-controller";
+	};
+
+	palmbus@10000000 {
+		compatible = "palmbus";
+		reg = <0x10000000 0x200000>;
+                ranges = <0x0 0x10000000 0x1FFFFF>;
+
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		sysc@0 {
+			compatible = "ralink,mt7620a-sysc";
+			reg = <0x0 0x100>;
+		};
+
+		intc: intc@200 {
+			compatible = "ralink,mt7620a-intc", "ralink,rt2880-intc";
+			reg = <0x200 0x100>;
+
+			interrupt-controller;
+			#interrupt-cells = <1>;
+
+			interrupt-parent = <&cpuintc>;
+			interrupts = <2>;
+		};
+
+		memc@300 {
+			compatible = "ralink,mt7620a-memc", "ralink,rt3050-memc";
+			reg = <0x300 0x100>;
+		};
+
+		uartlite@c00 {
+			compatible = "ralink,mt7620a-uart", "ralink,rt2880-uart", "ns16550a";
+			reg = <0xc00 0x100>;
+
+			interrupt-parent = <&intc>;
+			interrupts = <12>;
+
+			reg-shift = <2>;
+		};
+	};
+};
diff --git a/arch/mips/ralink/dts/mt7620a_eval.dts b/arch/mips/ralink/dts/mt7620a_eval.dts
new file mode 100644
index 0000000..35eb874
--- /dev/null
+++ b/arch/mips/ralink/dts/mt7620a_eval.dts
@@ -0,0 +1,16 @@
+/dts-v1/;
+
+/include/ "mt7620a.dtsi"
+
+/ {
+	compatible = "ralink,mt7620a-eval-board", "ralink,mt7620a-soc";
+	model = "Ralink MT7620A evaluation board";
+
+	memory@0 {
+		reg = <0x0 0x2000000>;
+	};
+
+	chosen {
+		bootargs = "console=ttyS0,57600";
+	};
+};
diff --git a/arch/mips/ralink/dts/rt2880.dtsi b/arch/mips/ralink/dts/rt2880.dtsi
new file mode 100644
index 0000000..182afde
--- /dev/null
+++ b/arch/mips/ralink/dts/rt2880.dtsi
@@ -0,0 +1,58 @@
+/ {
+	#address-cells = <1>;
+	#size-cells = <1>;
+	compatible = "ralink,rt2880-soc";
+
+	cpus {
+		cpu@0 {
+			compatible = "mips,mips4KEc";
+		};
+	};
+
+	cpuintc: cpuintc@0 {
+		#address-cells = <0>;
+		#interrupt-cells = <1>;
+		interrupt-controller;
+		compatible = "mti,cpu-interrupt-controller";
+	};
+
+	palmbus@300000 {
+		compatible = "palmbus";
+		reg = <0x300000 0x200000>;
+                ranges = <0x0 0x300000 0x1FFFFF>;
+
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		sysc@0 {
+			compatible = "ralink,rt2880-sysc";
+			reg = <0x0 0x100>;
+		};
+
+		intc: intc@200 {
+			compatible = "ralink,rt2880-intc";
+			reg = <0x200 0x100>;
+
+			interrupt-controller;
+			#interrupt-cells = <1>;
+
+			interrupt-parent = <&cpuintc>;
+			interrupts = <2>;
+		};
+
+		memc@300 {
+			compatible = "ralink,rt2880-memc";
+			reg = <0x300 0x100>;
+		};
+
+		uartlite@c00 {
+			compatible = "ralink,rt2880-uart", "ns16550a";
+			reg = <0xc00 0x100>;
+
+			interrupt-parent = <&intc>;
+			interrupts = <8>;
+
+			reg-shift = <2>;
+		};
+	};
+};
diff --git a/arch/mips/ralink/dts/rt2880_eval.dts b/arch/mips/ralink/dts/rt2880_eval.dts
new file mode 100644
index 0000000..322d700
--- /dev/null
+++ b/arch/mips/ralink/dts/rt2880_eval.dts
@@ -0,0 +1,46 @@
+/dts-v1/;
+
+/include/ "rt2880.dtsi"
+
+/ {
+	compatible = "ralink,rt2880-eval-board", "ralink,rt2880-soc";
+	model = "Ralink RT2880 evaluation board";
+
+	memory@0 {
+		reg = <0x8000000 0x2000000>;
+	};
+
+	chosen {
+		bootargs = "console=ttyS0,57600";
+	};
+
+	cfi@1f000000 {
+		compatible = "cfi-flash";
+		reg = <0x1f000000 0x400000>;
+
+		bank-width = <2>;
+		device-width = <2>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		partition@0 {
+			label = "uboot";
+			reg = <0x0 0x30000>;
+			read-only;
+		};
+		partition@30000 {
+			label = "uboot-env";
+			reg = <0x30000 0x10000>;
+			read-only;
+		};
+		partition@40000 {
+			label = "calibration";
+			reg = <0x40000 0x10000>;
+			read-only;
+		};
+		partition@50000 {
+			label = "linux";
+			reg = <0x50000 0x3b0000>;
+		};
+	};
+};
diff --git a/arch/mips/ralink/dts/rt3050.dtsi b/arch/mips/ralink/dts/rt3050.dtsi
index 069d066..ef7da1e 100644
--- a/arch/mips/ralink/dts/rt3050.dtsi
+++ b/arch/mips/ralink/dts/rt3050.dtsi
@@ -1,7 +1,7 @@
 / {
 	#address-cells = <1>;
 	#size-cells = <1>;
-	compatible = "ralink,rt3050-soc", "ralink,rt3052-soc";
+	compatible = "ralink,rt3050-soc", "ralink,rt3052-soc", "ralink,rt3350-soc";
 
 	cpus {
 		cpu@0 {
@@ -9,10 +9,6 @@
 		};
 	};
 
-	chosen {
-		bootargs = "console=ttyS0,57600 init=/init";
-	};
-
 	cpuintc: cpuintc@0 {
 		#address-cells = <0>;
 		#interrupt-cells = <1>;
@@ -23,7 +19,7 @@
 	palmbus@10000000 {
 		compatible = "palmbus";
 		reg = <0x10000000 0x200000>;
-                ranges = <0x0 0x10000000 0x1FFFFF>;
+		ranges = <0x0 0x10000000 0x1FFFFF>;
 
 		#address-cells = <1>;
 		#size-cells = <1>;
@@ -33,11 +29,6 @@
 			reg = <0x0 0x100>;
 		};
 
-		timer@100 {
-			compatible = "ralink,rt3052-wdt", "ralink,rt2880-wdt";
-			reg = <0x100 0x100>;
-		};
-
 		intc: intc@200 {
 			compatible = "ralink,rt3052-intc", "ralink,rt2880-intc";
 			reg = <0x200 0x100>;
@@ -54,45 +45,6 @@
 			reg = <0x300 0x100>;
 		};
 
-		gpio0: gpio@600 {
-			compatible = "ralink,rt3052-gpio", "ralink,rt2880-gpio";
-			reg = <0x600 0x34>;
-
-			gpio-controller;
-			#gpio-cells = <2>;
-
-			ralink,ngpio = <24>;
-			ralink,regs = [ 00 04 08 0c
-					20 24 28 2c
-					30 34 ];
-		};
-
-		gpio1: gpio@638 {
-			compatible = "ralink,rt3052-gpio", "ralink,rt2880-gpio";
-			reg = <0x638 0x24>;
-
-			gpio-controller;
-			#gpio-cells = <2>;
-
-			ralink,ngpio = <16>;
-			ralink,regs = [ 00 04 08 0c
-					10 14 18 1c
-					20 24 ];
-		};
-
-		gpio2: gpio@660 {
-			compatible = "ralink,rt3052-gpio", "ralink,rt2880-gpio";
-			reg = <0x660 0x24>;
-
-			gpio-controller;
-			#gpio-cells = <2>;
-
-			ralink,ngpio = <12>;
-			ralink,regs = [ 00 04 08 0c
-					10 14 18 1c
-					20 24 ];
-		};
-
 		uartlite@c00 {
 			compatible = "ralink,rt3052-uart", "ralink,rt2880-uart", "ns16550a";
 			reg = <0xc00 0x100>;
diff --git a/arch/mips/ralink/dts/rt3052_eval.dts b/arch/mips/ralink/dts/rt3052_eval.dts
index 148a590..c18c9a8 100644
--- a/arch/mips/ralink/dts/rt3052_eval.dts
+++ b/arch/mips/ralink/dts/rt3052_eval.dts
@@ -1,10 +1,8 @@
 /dts-v1/;
 
-/include/ "rt3050.dtsi"
+#include "rt3050.dtsi"
 
 / {
-	#address-cells = <1>;
-	#size-cells = <1>;
 	compatible = "ralink,rt3052-eval-board", "ralink,rt3052-soc";
 	model = "Ralink RT3052 evaluation board";
 
@@ -12,12 +10,8 @@
 		reg = <0x0 0x2000000>;
 	};
 
-	palmbus@10000000 {
-		sysc@0 {
-			ralink,pinmmux = "uartlite", "spi";
-			ralink,uartmux = "gpio";
-			ralink,wdtmux = <0>;
-		};
+	chosen {
+		bootargs = "console=ttyS0,57600";
 	};
 
 	cfi@1f000000 {
diff --git a/arch/mips/ralink/dts/rt3883.dtsi b/arch/mips/ralink/dts/rt3883.dtsi
new file mode 100644
index 0000000..3b131dd
--- /dev/null
+++ b/arch/mips/ralink/dts/rt3883.dtsi
@@ -0,0 +1,58 @@
+/ {
+	#address-cells = <1>;
+	#size-cells = <1>;
+	compatible = "ralink,rt3883-soc";
+
+	cpus {
+		cpu@0 {
+			compatible = "mips,mips74Kc";
+		};
+	};
+
+	cpuintc: cpuintc@0 {
+		#address-cells = <0>;
+		#interrupt-cells = <1>;
+		interrupt-controller;
+		compatible = "mti,cpu-interrupt-controller";
+	};
+
+	palmbus@10000000 {
+		compatible = "palmbus";
+		reg = <0x10000000 0x200000>;
+		ranges = <0x0 0x10000000 0x1FFFFF>;
+
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		sysc@0 {
+			compatible = "ralink,rt3883-sysc", "ralink,rt3050-sysc";
+			reg = <0x0 0x100>;
+		};
+
+		intc: intc@200 {
+			compatible = "ralink,rt3883-intc", "ralink,rt2880-intc";
+			reg = <0x200 0x100>;
+
+			interrupt-controller;
+			#interrupt-cells = <1>;
+
+			interrupt-parent = <&cpuintc>;
+			interrupts = <2>;
+		};
+
+		memc@300 {
+			compatible = "ralink,rt3883-memc", "ralink,rt3050-memc";
+			reg = <0x300 0x100>;
+		};
+
+		uartlite@c00 {
+			compatible = "ralink,rt3883-uart", "ralink,rt2880-uart", "ns16550a";
+			reg = <0xc00 0x100>;
+
+			interrupt-parent = <&intc>;
+			interrupts = <12>;
+
+			reg-shift = <2>;
+		};
+	};
+};
diff --git a/arch/mips/ralink/dts/rt3883_eval.dts b/arch/mips/ralink/dts/rt3883_eval.dts
new file mode 100644
index 0000000..2fa6b33
--- /dev/null
+++ b/arch/mips/ralink/dts/rt3883_eval.dts
@@ -0,0 +1,16 @@
+/dts-v1/;
+
+/include/ "rt3883.dtsi"
+
+/ {
+	compatible = "ralink,rt3883-eval-board", "ralink,rt3883-soc";
+	model = "Ralink RT3883 evaluation board";
+
+	memory@0 {
+		reg = <0x0 0x2000000>;
+	};
+
+	chosen {
+		bootargs = "console=ttyS0,57600";
+	};
+};
diff --git a/arch/mips/ralink/early_printk.c b/arch/mips/ralink/early_printk.c
index c4ae47e..b46d041 100644
--- a/arch/mips/ralink/early_printk.c
+++ b/arch/mips/ralink/early_printk.c
@@ -11,7 +11,11 @@
 
 #include <asm/addrspace.h>
 
+#ifdef CONFIG_SOC_RT288X
+#define EARLY_UART_BASE         0x300c00
+#else
 #define EARLY_UART_BASE         0x10000c00
+#endif
 
 #define UART_REG_RX             0x00
 #define UART_REG_TX             0x04
diff --git a/arch/mips/ralink/irq.c b/arch/mips/ralink/irq.c
index 6d054c5..320b1f1 100644
--- a/arch/mips/ralink/irq.c
+++ b/arch/mips/ralink/irq.c
@@ -31,6 +31,7 @@
 #define INTC_INT_GLOBAL		BIT(31)
 
 #define RALINK_CPU_IRQ_INTC	(MIPS_CPU_IRQ_BASE + 2)
+#define RALINK_CPU_IRQ_PCI	(MIPS_CPU_IRQ_BASE + 4)
 #define RALINK_CPU_IRQ_FE	(MIPS_CPU_IRQ_BASE + 5)
 #define RALINK_CPU_IRQ_WIFI	(MIPS_CPU_IRQ_BASE + 6)
 #define RALINK_CPU_IRQ_COUNTER	(MIPS_CPU_IRQ_BASE + 7)
@@ -104,6 +105,9 @@ asmlinkage void plat_irq_dispatch(void)
 	else if (pending & STATUSF_IP6)
 		do_IRQ(RALINK_CPU_IRQ_WIFI);
 
+	else if (pending & STATUSF_IP4)
+		do_IRQ(RALINK_CPU_IRQ_PCI);
+
 	else if (pending & STATUSF_IP2)
 		do_IRQ(RALINK_CPU_IRQ_INTC);
 
@@ -162,6 +166,7 @@ static int __init intc_of_init(struct device_node *node,
 	irq_set_chained_handler(irq, ralink_intc_irq_handler);
 	irq_set_handler_data(irq, domain);
 
+	/* tell the kernel which irq is used for performance monitoring */
 	cp0_perfcount_irq = irq_create_mapping(domain, 9);
 
 	return 0;
diff --git a/arch/mips/ralink/mt7620.c b/arch/mips/ralink/mt7620.c
new file mode 100644
index 0000000..0018b1a
--- /dev/null
+++ b/arch/mips/ralink/mt7620.c
@@ -0,0 +1,234 @@
+/*
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published
+ * by the Free Software Foundation.
+ *
+ * Parts of this file are based on Ralink's 2.6.21 BSP
+ *
+ * Copyright (C) 2008-2011 Gabor Juhos <juhosg@openwrt.org>
+ * Copyright (C) 2008 Imre Kaloz <kaloz@openwrt.org>
+ * Copyright (C) 2013 John Crispin <blogic@openwrt.org>
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/module.h>
+
+#include <asm/mipsregs.h>
+#include <asm/mach-ralink/ralink_regs.h>
+#include <asm/mach-ralink/mt7620.h>
+
+#include "common.h"
+
+/* does the board have sdram or ddram */
+static int dram_type;
+
+/* the pll dividers */
+static u32 mt7620_clk_divider[] = { 2, 3, 4, 8 };
+
+static struct ralink_pinmux_grp mode_mux[] = {
+	{
+		.name = "i2c",
+		.mask = MT7620_GPIO_MODE_I2C,
+		.gpio_first = 1,
+		.gpio_last = 2,
+	}, {
+		.name = "spi",
+		.mask = MT7620_GPIO_MODE_SPI,
+		.gpio_first = 3,
+		.gpio_last = 6,
+	}, {
+		.name = "uartlite",
+		.mask = MT7620_GPIO_MODE_UART1,
+		.gpio_first = 15,
+		.gpio_last = 16,
+	}, {
+		.name = "wdt",
+		.mask = MT7620_GPIO_MODE_WDT,
+		.gpio_first = 17,
+		.gpio_last = 17,
+	}, {
+		.name = "mdio",
+		.mask = MT7620_GPIO_MODE_MDIO,
+		.gpio_first = 22,
+		.gpio_last = 23,
+	}, {
+		.name = "rgmii1",
+		.mask = MT7620_GPIO_MODE_RGMII1,
+		.gpio_first = 24,
+		.gpio_last = 35,
+	}, {
+		.name = "spi refclk",
+		.mask = MT7620_GPIO_MODE_SPI_REF_CLK,
+		.gpio_first = 37,
+		.gpio_last = 39,
+	}, {
+		.name = "jtag",
+		.mask = MT7620_GPIO_MODE_JTAG,
+		.gpio_first = 40,
+		.gpio_last = 44,
+	}, {
+		/* shared lines with jtag */
+		.name = "ephy",
+		.mask = MT7620_GPIO_MODE_EPHY,
+		.gpio_first = 40,
+		.gpio_last = 44,
+	}, {
+		.name = "nand",
+		.mask = MT7620_GPIO_MODE_JTAG,
+		.gpio_first = 45,
+		.gpio_last = 59,
+	}, {
+		.name = "rgmii2",
+		.mask = MT7620_GPIO_MODE_RGMII2,
+		.gpio_first = 60,
+		.gpio_last = 71,
+	}, {
+		.name = "wled",
+		.mask = MT7620_GPIO_MODE_WLED,
+		.gpio_first = 72,
+		.gpio_last = 72,
+	}, {0}
+};
+
+static struct ralink_pinmux_grp uart_mux[] = {
+	{
+		.name = "uartf",
+		.mask = MT7620_GPIO_MODE_UARTF,
+		.gpio_first = 7,
+		.gpio_last = 14,
+	}, {
+		.name = "pcm uartf",
+		.mask = MT7620_GPIO_MODE_PCM_UARTF,
+		.gpio_first = 7,
+		.gpio_last = 14,
+	}, {
+		.name = "pcm i2s",
+		.mask = MT7620_GPIO_MODE_PCM_I2S,
+		.gpio_first = 7,
+		.gpio_last = 14,
+	}, {
+		.name = "i2s uartf",
+		.mask = MT7620_GPIO_MODE_I2S_UARTF,
+		.gpio_first = 7,
+		.gpio_last = 14,
+	}, {
+		.name = "pcm gpio",
+		.mask = MT7620_GPIO_MODE_PCM_GPIO,
+		.gpio_first = 11,
+		.gpio_last = 14,
+	}, {
+		.name = "gpio uartf",
+		.mask = MT7620_GPIO_MODE_GPIO_UARTF,
+		.gpio_first = 7,
+		.gpio_last = 10,
+	}, {
+		.name = "gpio i2s",
+		.mask = MT7620_GPIO_MODE_GPIO_I2S,
+		.gpio_first = 7,
+		.gpio_last = 10,
+	}, {
+		.name = "gpio",
+		.mask = MT7620_GPIO_MODE_GPIO,
+	}, {0}
+};
+
+struct ralink_pinmux rt_gpio_pinmux = {
+	.mode = mode_mux,
+	.uart = uart_mux,
+	.uart_shift = MT7620_GPIO_MODE_UART0_SHIFT,
+	.uart_mask = MT7620_GPIO_MODE_UART0_MASK,
+};
+
+void __init ralink_clk_init(void)
+{
+	unsigned long cpu_rate, sys_rate;
+	u32 c0 = rt_sysc_r32(SYSC_REG_CPLL_CONFIG0);
+	u32 c1 = rt_sysc_r32(SYSC_REG_CPLL_CONFIG1);
+	u32 swconfig = (c0 >> CPLL_SW_CONFIG_SHIFT) & CPLL_SW_CONFIG_MASK;
+	u32 cpu_clk = (c1 >> CPLL_CPU_CLK_SHIFT) & CPLL_CPU_CLK_MASK;
+
+	if (cpu_clk) {
+		cpu_rate = 480000000;
+	} else if (!swconfig) {
+		cpu_rate = 600000000;
+	} else {
+		u32 m = (c0 >> CPLL_MULT_RATIO_SHIFT) & CPLL_MULT_RATIO;
+		u32 d = (c0 >> CPLL_DIV_RATIO_SHIFT) & CPLL_DIV_RATIO;
+
+		cpu_rate = ((40 * (m + 24)) / mt7620_clk_divider[d]) * 1000000;
+	}
+
+	if (dram_type == SYSCFG0_DRAM_TYPE_SDRAM)
+		sys_rate = cpu_rate / 4;
+	else
+		sys_rate = cpu_rate / 3;
+
+	ralink_clk_add("cpu", cpu_rate);
+	ralink_clk_add("10000100.timer", 40000000);
+	ralink_clk_add("10000500.uart", 40000000);
+	ralink_clk_add("10000c00.uartlite", 40000000);
+}
+
+void __init ralink_of_remap(void)
+{
+	rt_sysc_membase = plat_of_remap_node("ralink,mt7620a-sysc");
+	rt_memc_membase = plat_of_remap_node("ralink,mt7620a-memc");
+
+	if (!rt_sysc_membase || !rt_memc_membase)
+		panic("Failed to remap core resources");
+}
+
+void prom_soc_init(struct ralink_soc_info *soc_info)
+{
+	void __iomem *sysc = (void __iomem *) KSEG1ADDR(MT7620_SYSC_BASE);
+	unsigned char *name = NULL;
+	u32 n0;
+	u32 n1;
+	u32 rev;
+	u32 cfg0;
+
+	n0 = __raw_readl(sysc + SYSC_REG_CHIP_NAME0);
+	n1 = __raw_readl(sysc + SYSC_REG_CHIP_NAME1);
+
+	if (n0 == MT7620N_CHIP_NAME0 && n1 == MT7620N_CHIP_NAME1) {
+		name = "MT7620N";
+		soc_info->compatible = "ralink,mt7620n-soc";
+	} else if (n0 == MT7620A_CHIP_NAME0 && n1 == MT7620A_CHIP_NAME1) {
+		name = "MT7620A";
+		soc_info->compatible = "ralink,mt7620a-soc";
+	} else {
+		panic("mt7620: unknown SoC, n0:%08x n1:%08x\n", n0, n1);
+	}
+
+	rev = __raw_readl(sysc + SYSC_REG_CHIP_REV);
+
+	snprintf(soc_info->sys_type, RAMIPS_SYS_TYPE_LEN,
+		"Ralink %s ver:%u eco:%u",
+		name,
+		(rev >> CHIP_REV_VER_SHIFT) & CHIP_REV_VER_MASK,
+		(rev & CHIP_REV_ECO_MASK));
+
+	cfg0 = __raw_readl(sysc + SYSC_REG_SYSTEM_CONFIG0);
+	dram_type = (cfg0 >> SYSCFG0_DRAM_TYPE_SHIFT) & SYSCFG0_DRAM_TYPE_MASK;
+
+	switch (dram_type) {
+	case SYSCFG0_DRAM_TYPE_SDRAM:
+		soc_info->mem_size_min = MT7620_SDRAM_SIZE_MIN;
+		soc_info->mem_size_max = MT7620_SDRAM_SIZE_MAX;
+		break;
+
+	case SYSCFG0_DRAM_TYPE_DDR1:
+		soc_info->mem_size_min = MT7620_DDR1_SIZE_MIN;
+		soc_info->mem_size_max = MT7620_DDR1_SIZE_MAX;
+		break;
+
+	case SYSCFG0_DRAM_TYPE_DDR2:
+		soc_info->mem_size_min = MT7620_DDR2_SIZE_MIN;
+		soc_info->mem_size_max = MT7620_DDR2_SIZE_MAX;
+		break;
+	default:
+		BUG();
+	}
+	soc_info->mem_base = MT7620_DRAM_BASE;
+}
diff --git a/arch/mips/ralink/of.c b/arch/mips/ralink/of.c
index 4165e70..fb15695 100644
--- a/arch/mips/ralink/of.c
+++ b/arch/mips/ralink/of.c
@@ -11,6 +11,7 @@
 #include <linux/io.h>
 #include <linux/clk.h>
 #include <linux/init.h>
+#include <linux/sizes.h>
 #include <linux/of_fdt.h>
 #include <linux/kernel.h>
 #include <linux/bootmem.h>
@@ -85,6 +86,14 @@ void __init plat_mem_setup(void)
 	 * parsed resulting in our memory appearing
 	 */
 	__dt_setup_arch(&__dtb_start);
+
+	if (soc_info.mem_size)
+		add_memory_region(soc_info.mem_base, soc_info.mem_size,
+				  BOOT_MEM_RAM);
+	else
+		detect_memory_region(soc_info.mem_base,
+				     soc_info.mem_size_min * SZ_1M,
+				     soc_info.mem_size_max * SZ_1M);
 }
 
 static int __init plat_of_setup(void)
diff --git a/arch/mips/ralink/rt288x.c b/arch/mips/ralink/rt288x.c
new file mode 100644
index 0000000..f87de1a
--- /dev/null
+++ b/arch/mips/ralink/rt288x.c
@@ -0,0 +1,143 @@
+/*
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published
+ * by the Free Software Foundation.
+ *
+ * Parts of this file are based on Ralink's 2.6.21 BSP
+ *
+ * Copyright (C) 2008-2011 Gabor Juhos <juhosg@openwrt.org>
+ * Copyright (C) 2008 Imre Kaloz <kaloz@openwrt.org>
+ * Copyright (C) 2013 John Crispin <blogic@openwrt.org>
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/module.h>
+
+#include <asm/mipsregs.h>
+#include <asm/mach-ralink/ralink_regs.h>
+#include <asm/mach-ralink/rt288x.h>
+
+#include "common.h"
+
+static struct ralink_pinmux_grp mode_mux[] = {
+	{
+		.name = "i2c",
+		.mask = RT2880_GPIO_MODE_I2C,
+		.gpio_first = 1,
+		.gpio_last = 2,
+	}, {
+		.name = "spi",
+		.mask = RT2880_GPIO_MODE_SPI,
+		.gpio_first = 3,
+		.gpio_last = 6,
+	}, {
+		.name = "uartlite",
+		.mask = RT2880_GPIO_MODE_UART0,
+		.gpio_first = 7,
+		.gpio_last = 14,
+	}, {
+		.name = "jtag",
+		.mask = RT2880_GPIO_MODE_JTAG,
+		.gpio_first = 17,
+		.gpio_last = 21,
+	}, {
+		.name = "mdio",
+		.mask = RT2880_GPIO_MODE_MDIO,
+		.gpio_first = 22,
+		.gpio_last = 23,
+	}, {
+		.name = "sdram",
+		.mask = RT2880_GPIO_MODE_SDRAM,
+		.gpio_first = 24,
+		.gpio_last = 39,
+	}, {
+		.name = "pci",
+		.mask = RT2880_GPIO_MODE_PCI,
+		.gpio_first = 40,
+		.gpio_last = 71,
+	}, {0}
+};
+
+static void rt288x_wdt_reset(void)
+{
+	u32 t;
+
+	/* enable WDT reset output on pin SRAM_CS_N */
+	t = rt_sysc_r32(SYSC_REG_CLKCFG);
+	t |= CLKCFG_SRAM_CS_N_WDT;
+	rt_sysc_w32(t, SYSC_REG_CLKCFG);
+}
+
+struct ralink_pinmux rt_gpio_pinmux = {
+	.mode = mode_mux,
+	.wdt_reset = rt288x_wdt_reset,
+};
+
+void __init ralink_clk_init(void)
+{
+	unsigned long cpu_rate;
+	u32 t = rt_sysc_r32(SYSC_REG_SYSTEM_CONFIG);
+	t = ((t >> SYSTEM_CONFIG_CPUCLK_SHIFT) & SYSTEM_CONFIG_CPUCLK_MASK);
+
+	switch (t) {
+	case SYSTEM_CONFIG_CPUCLK_250:
+		cpu_rate = 250000000;
+		break;
+	case SYSTEM_CONFIG_CPUCLK_266:
+		cpu_rate = 266666667;
+		break;
+	case SYSTEM_CONFIG_CPUCLK_280:
+		cpu_rate = 280000000;
+		break;
+	case SYSTEM_CONFIG_CPUCLK_300:
+		cpu_rate = 300000000;
+		break;
+	}
+
+	ralink_clk_add("cpu", cpu_rate);
+	ralink_clk_add("300100.timer", cpu_rate / 2);
+	ralink_clk_add("300120.watchdog", cpu_rate / 2);
+	ralink_clk_add("300500.uart", cpu_rate / 2);
+	ralink_clk_add("300c00.uartlite", cpu_rate / 2);
+	ralink_clk_add("400000.ethernet", cpu_rate / 2);
+}
+
+void __init ralink_of_remap(void)
+{
+	rt_sysc_membase = plat_of_remap_node("ralink,rt2880-sysc");
+	rt_memc_membase = plat_of_remap_node("ralink,rt2880-memc");
+
+	if (!rt_sysc_membase || !rt_memc_membase)
+		panic("Failed to remap core resources");
+}
+
+void prom_soc_init(struct ralink_soc_info *soc_info)
+{
+	void __iomem *sysc = (void __iomem *) KSEG1ADDR(RT2880_SYSC_BASE);
+	const char *name;
+	u32 n0;
+	u32 n1;
+	u32 id;
+
+	n0 = __raw_readl(sysc + SYSC_REG_CHIP_NAME0);
+	n1 = __raw_readl(sysc + SYSC_REG_CHIP_NAME1);
+	id = __raw_readl(sysc + SYSC_REG_CHIP_ID);
+
+	if (n0 == RT2880_CHIP_NAME0 && n1 == RT2880_CHIP_NAME1) {
+		soc_info->compatible = "ralink,r2880-soc";
+		name = "RT2880";
+	} else {
+		panic("rt288x: unknown SoC, n0:%08x n1:%08x", n0, n1);
+	}
+
+	snprintf(soc_info->sys_type, RAMIPS_SYS_TYPE_LEN,
+		"Ralink %s id:%u rev:%u",
+		name,
+		(id >> CHIP_ID_ID_SHIFT) & CHIP_ID_ID_MASK,
+		(id & CHIP_ID_REV_MASK));
+
+	soc_info->mem_base = RT2880_SDRAM_BASE;
+	soc_info->mem_size_min = RT2880_MEM_SIZE_MIN;
+	soc_info->mem_size_max = RT2880_MEM_SIZE_MAX;
+}
diff --git a/arch/mips/ralink/rt305x.c b/arch/mips/ralink/rt305x.c
index 0a4bbdc..ca7ee3a 100644
--- a/arch/mips/ralink/rt305x.c
+++ b/arch/mips/ralink/rt305x.c
@@ -22,7 +22,7 @@
 
 enum rt305x_soc_type rt305x_soc;
 
-struct ralink_pinmux_grp mode_mux[] = {
+static struct ralink_pinmux_grp mode_mux[] = {
 	{
 		.name = "i2c",
 		.mask = RT305X_GPIO_MODE_I2C,
@@ -61,7 +61,7 @@ struct ralink_pinmux_grp mode_mux[] = {
 	}, {0}
 };
 
-struct ralink_pinmux_grp uart_mux[] = {
+static struct ralink_pinmux_grp uart_mux[] = {
 	{
 		.name = "uartf",
 		.mask = RT305X_GPIO_MODE_UARTF,
@@ -91,19 +91,19 @@ struct ralink_pinmux_grp uart_mux[] = {
 		.name = "gpio uartf",
 		.mask = RT305X_GPIO_MODE_GPIO_UARTF,
 		.gpio_first = RT305X_GPIO_7,
-		.gpio_last = RT305X_GPIO_14,
+		.gpio_last = RT305X_GPIO_10,
 	}, {
 		.name = "gpio i2s",
 		.mask = RT305X_GPIO_MODE_GPIO_I2S,
 		.gpio_first = RT305X_GPIO_7,
-		.gpio_last = RT305X_GPIO_14,
+		.gpio_last = RT305X_GPIO_10,
 	}, {
 		.name = "gpio",
 		.mask = RT305X_GPIO_MODE_GPIO,
 	}, {0}
 };
 
-void rt305x_wdt_reset(void)
+static void rt305x_wdt_reset(void)
 {
 	u32 t;
 
@@ -114,16 +114,53 @@ void rt305x_wdt_reset(void)
 	rt_sysc_w32(t, SYSC_REG_SYSTEM_CONFIG);
 }
 
-struct ralink_pinmux gpio_pinmux = {
+struct ralink_pinmux rt_gpio_pinmux = {
 	.mode = mode_mux,
 	.uart = uart_mux,
 	.uart_shift = RT305X_GPIO_MODE_UART0_SHIFT,
+	.uart_mask = RT305X_GPIO_MODE_UART0_MASK,
 	.wdt_reset = rt305x_wdt_reset,
 };
 
+static unsigned long rt5350_get_mem_size(void)
+{
+	void __iomem *sysc = (void __iomem *) KSEG1ADDR(RT305X_SYSC_BASE);
+	unsigned long ret;
+	u32 t;
+
+	t = __raw_readl(sysc + SYSC_REG_SYSTEM_CONFIG);
+	t = (t >> RT5350_SYSCFG0_DRAM_SIZE_SHIFT) &
+		RT5350_SYSCFG0_DRAM_SIZE_MASK;
+
+	switch (t) {
+	case RT5350_SYSCFG0_DRAM_SIZE_2M:
+		ret = 2;
+		break;
+	case RT5350_SYSCFG0_DRAM_SIZE_8M:
+		ret = 8;
+		break;
+	case RT5350_SYSCFG0_DRAM_SIZE_16M:
+		ret = 16;
+		break;
+	case RT5350_SYSCFG0_DRAM_SIZE_32M:
+		ret = 32;
+		break;
+	case RT5350_SYSCFG0_DRAM_SIZE_64M:
+		ret = 64;
+		break;
+	default:
+		panic("rt5350: invalid DRAM size: %u", t);
+		break;
+	}
+
+	return ret;
+}
+
 void __init ralink_clk_init(void)
 {
 	unsigned long cpu_rate, sys_rate, wdt_rate, uart_rate;
+	unsigned long wmac_rate = 40000000;
+
 	u32 t = rt_sysc_r32(SYSC_REG_SYSTEM_CONFIG);
 
 	if (soc_is_rt305x() || soc_is_rt3350()) {
@@ -176,11 +213,21 @@ void __init ralink_clk_init(void)
 		BUG();
 	}
 
+	if (soc_is_rt3352() || soc_is_rt5350()) {
+		u32 val = rt_sysc_r32(RT3352_SYSC_REG_SYSCFG0);
+
+		if (!(val & RT3352_CLKCFG0_XTAL_SEL))
+			wmac_rate = 20000000;
+	}
+
 	ralink_clk_add("cpu", cpu_rate);
 	ralink_clk_add("10000b00.spi", sys_rate);
 	ralink_clk_add("10000100.timer", wdt_rate);
+	ralink_clk_add("10000120.watchdog", wdt_rate);
 	ralink_clk_add("10000500.uart", uart_rate);
 	ralink_clk_add("10000c00.uartlite", uart_rate);
+	ralink_clk_add("10100000.ethernet", sys_rate);
+	ralink_clk_add("10180000.wmac", wmac_rate);
 }
 
 void __init ralink_of_remap(void)
@@ -239,4 +286,15 @@ void prom_soc_init(struct ralink_soc_info *soc_info)
 		name,
 		(id >> CHIP_ID_ID_SHIFT) & CHIP_ID_ID_MASK,
 		(id & CHIP_ID_REV_MASK));
+
+	soc_info->mem_base = RT305X_SDRAM_BASE;
+	if (soc_is_rt5350()) {
+		soc_info->mem_size = rt5350_get_mem_size();
+	} else if (soc_is_rt305x() || soc_is_rt3350()) {
+		soc_info->mem_size_min = RT305X_MEM_SIZE_MIN;
+		soc_info->mem_size_max = RT305X_MEM_SIZE_MAX;
+	} else if (soc_is_rt3352()) {
+		soc_info->mem_size_min = RT3352_MEM_SIZE_MIN;
+		soc_info->mem_size_max = RT3352_MEM_SIZE_MAX;
+	}
 }
diff --git a/arch/mips/ralink/rt3883.c b/arch/mips/ralink/rt3883.c
new file mode 100644
index 0000000..b474ac2
--- /dev/null
+++ b/arch/mips/ralink/rt3883.c
@@ -0,0 +1,246 @@
+/*
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published
+ * by the Free Software Foundation.
+ *
+ * Parts of this file are based on Ralink's 2.6.21 BSP
+ *
+ * Copyright (C) 2008 Imre Kaloz <kaloz@openwrt.org>
+ * Copyright (C) 2008-2011 Gabor Juhos <juhosg@openwrt.org>
+ * Copyright (C) 2013 John Crispin <blogic@openwrt.org>
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/module.h>
+
+#include <asm/mipsregs.h>
+#include <asm/mach-ralink/ralink_regs.h>
+#include <asm/mach-ralink/rt3883.h>
+
+#include "common.h"
+
+static struct ralink_pinmux_grp mode_mux[] = {
+	{
+		.name = "i2c",
+		.mask = RT3883_GPIO_MODE_I2C,
+		.gpio_first = RT3883_GPIO_I2C_SD,
+		.gpio_last = RT3883_GPIO_I2C_SCLK,
+	}, {
+		.name = "spi",
+		.mask = RT3883_GPIO_MODE_SPI,
+		.gpio_first = RT3883_GPIO_SPI_CS0,
+		.gpio_last = RT3883_GPIO_SPI_MISO,
+	}, {
+		.name = "uartlite",
+		.mask = RT3883_GPIO_MODE_UART1,
+		.gpio_first = RT3883_GPIO_UART1_TXD,
+		.gpio_last = RT3883_GPIO_UART1_RXD,
+	}, {
+		.name = "jtag",
+		.mask = RT3883_GPIO_MODE_JTAG,
+		.gpio_first = RT3883_GPIO_JTAG_TDO,
+		.gpio_last = RT3883_GPIO_JTAG_TCLK,
+	}, {
+		.name = "mdio",
+		.mask = RT3883_GPIO_MODE_MDIO,
+		.gpio_first = RT3883_GPIO_MDIO_MDC,
+		.gpio_last = RT3883_GPIO_MDIO_MDIO,
+	}, {
+		.name = "ge1",
+		.mask = RT3883_GPIO_MODE_GE1,
+		.gpio_first = RT3883_GPIO_GE1_TXD0,
+		.gpio_last = RT3883_GPIO_GE1_RXCLK,
+	}, {
+		.name = "ge2",
+		.mask = RT3883_GPIO_MODE_GE2,
+		.gpio_first = RT3883_GPIO_GE2_TXD0,
+		.gpio_last = RT3883_GPIO_GE2_RXCLK,
+	}, {
+		.name = "pci",
+		.mask = RT3883_GPIO_MODE_PCI,
+		.gpio_first = RT3883_GPIO_PCI_AD0,
+		.gpio_last = RT3883_GPIO_PCI_AD31,
+	}, {
+		.name = "lna a",
+		.mask = RT3883_GPIO_MODE_LNA_A,
+		.gpio_first = RT3883_GPIO_LNA_PE_A0,
+		.gpio_last = RT3883_GPIO_LNA_PE_A2,
+	}, {
+		.name = "lna g",
+		.mask = RT3883_GPIO_MODE_LNA_G,
+		.gpio_first = RT3883_GPIO_LNA_PE_G0,
+		.gpio_last = RT3883_GPIO_LNA_PE_G2,
+	}, {0}
+};
+
+static struct ralink_pinmux_grp uart_mux[] = {
+	{
+		.name = "uartf",
+		.mask = RT3883_GPIO_MODE_UARTF,
+		.gpio_first = RT3883_GPIO_7,
+		.gpio_last = RT3883_GPIO_14,
+	}, {
+		.name = "pcm uartf",
+		.mask = RT3883_GPIO_MODE_PCM_UARTF,
+		.gpio_first = RT3883_GPIO_7,
+		.gpio_last = RT3883_GPIO_14,
+	}, {
+		.name = "pcm i2s",
+		.mask = RT3883_GPIO_MODE_PCM_I2S,
+		.gpio_first = RT3883_GPIO_7,
+		.gpio_last = RT3883_GPIO_14,
+	}, {
+		.name = "i2s uartf",
+		.mask = RT3883_GPIO_MODE_I2S_UARTF,
+		.gpio_first = RT3883_GPIO_7,
+		.gpio_last = RT3883_GPIO_14,
+	}, {
+		.name = "pcm gpio",
+		.mask = RT3883_GPIO_MODE_PCM_GPIO,
+		.gpio_first = RT3883_GPIO_11,
+		.gpio_last = RT3883_GPIO_14,
+	}, {
+		.name = "gpio uartf",
+		.mask = RT3883_GPIO_MODE_GPIO_UARTF,
+		.gpio_first = RT3883_GPIO_7,
+		.gpio_last = RT3883_GPIO_10,
+	}, {
+		.name = "gpio i2s",
+		.mask = RT3883_GPIO_MODE_GPIO_I2S,
+		.gpio_first = RT3883_GPIO_7,
+		.gpio_last = RT3883_GPIO_10,
+	}, {
+		.name = "gpio",
+		.mask = RT3883_GPIO_MODE_GPIO,
+	}, {0}
+};
+
+static struct ralink_pinmux_grp pci_mux[] = {
+	{
+		.name = "pci-dev",
+		.mask = 0,
+		.gpio_first = RT3883_GPIO_PCI_AD0,
+		.gpio_last = RT3883_GPIO_PCI_AD31,
+	}, {
+		.name = "pci-host2",
+		.mask = 1,
+		.gpio_first = RT3883_GPIO_PCI_AD0,
+		.gpio_last = RT3883_GPIO_PCI_AD31,
+	}, {
+		.name = "pci-host1",
+		.mask = 2,
+		.gpio_first = RT3883_GPIO_PCI_AD0,
+		.gpio_last = RT3883_GPIO_PCI_AD31,
+	}, {
+		.name = "pci-fnc",
+		.mask = 3,
+		.gpio_first = RT3883_GPIO_PCI_AD0,
+		.gpio_last = RT3883_GPIO_PCI_AD31,
+	}, {
+		.name = "pci-gpio",
+		.mask = 7,
+		.gpio_first = RT3883_GPIO_PCI_AD0,
+		.gpio_last = RT3883_GPIO_PCI_AD31,
+	}, {0}
+};
+
+static void rt3883_wdt_reset(void)
+{
+	u32 t;
+
+	/* enable WDT reset output on GPIO 2 */
+	t = rt_sysc_r32(RT3883_SYSC_REG_SYSCFG1);
+	t |= RT3883_SYSCFG1_GPIO2_AS_WDT_OUT;
+	rt_sysc_w32(t, RT3883_SYSC_REG_SYSCFG1);
+}
+
+struct ralink_pinmux rt_gpio_pinmux = {
+	.mode = mode_mux,
+	.uart = uart_mux,
+	.uart_shift = RT3883_GPIO_MODE_UART0_SHIFT,
+	.uart_mask = RT3883_GPIO_MODE_UART0_MASK,
+	.wdt_reset = rt3883_wdt_reset,
+	.pci = pci_mux,
+	.pci_shift = RT3883_GPIO_MODE_PCI_SHIFT,
+	.pci_mask = RT3883_GPIO_MODE_PCI_MASK,
+};
+
+void __init ralink_clk_init(void)
+{
+	unsigned long cpu_rate, sys_rate;
+	u32 syscfg0;
+	u32 clksel;
+	u32 ddr2;
+
+	syscfg0 = rt_sysc_r32(RT3883_SYSC_REG_SYSCFG0);
+	clksel = ((syscfg0 >> RT3883_SYSCFG0_CPUCLK_SHIFT) &
+		RT3883_SYSCFG0_CPUCLK_MASK);
+	ddr2 = syscfg0 & RT3883_SYSCFG0_DRAM_TYPE_DDR2;
+
+	switch (clksel) {
+	case RT3883_SYSCFG0_CPUCLK_250:
+		cpu_rate = 250000000;
+		sys_rate = (ddr2) ? 125000000 : 83000000;
+		break;
+	case RT3883_SYSCFG0_CPUCLK_384:
+		cpu_rate = 384000000;
+		sys_rate = (ddr2) ? 128000000 : 96000000;
+		break;
+	case RT3883_SYSCFG0_CPUCLK_480:
+		cpu_rate = 480000000;
+		sys_rate = (ddr2) ? 160000000 : 120000000;
+		break;
+	case RT3883_SYSCFG0_CPUCLK_500:
+		cpu_rate = 500000000;
+		sys_rate = (ddr2) ? 166000000 : 125000000;
+		break;
+	}
+
+	ralink_clk_add("cpu", cpu_rate);
+	ralink_clk_add("10000100.timer", sys_rate);
+	ralink_clk_add("10000120.watchdog", sys_rate);
+	ralink_clk_add("10000500.uart", 40000000);
+	ralink_clk_add("10000b00.spi", sys_rate);
+	ralink_clk_add("10000c00.uartlite", 40000000);
+	ralink_clk_add("10100000.ethernet", sys_rate);
+}
+
+void __init ralink_of_remap(void)
+{
+	rt_sysc_membase = plat_of_remap_node("ralink,rt3883-sysc");
+	rt_memc_membase = plat_of_remap_node("ralink,rt3883-memc");
+
+	if (!rt_sysc_membase || !rt_memc_membase)
+		panic("Failed to remap core resources");
+}
+
+void prom_soc_init(struct ralink_soc_info *soc_info)
+{
+	void __iomem *sysc = (void __iomem *) KSEG1ADDR(RT3883_SYSC_BASE);
+	const char *name;
+	u32 n0;
+	u32 n1;
+	u32 id;
+
+	n0 = __raw_readl(sysc + RT3883_SYSC_REG_CHIPID0_3);
+	n1 = __raw_readl(sysc + RT3883_SYSC_REG_CHIPID4_7);
+	id = __raw_readl(sysc + RT3883_SYSC_REG_REVID);
+
+	if (n0 == RT3883_CHIP_NAME0 && n1 == RT3883_CHIP_NAME1) {
+		soc_info->compatible = "ralink,rt3883-soc";
+		name = "RT3883";
+	} else {
+		panic("rt3883: unknown SoC, n0:%08x n1:%08x", n0, n1);
+	}
+
+	snprintf(soc_info->sys_type, RAMIPS_SYS_TYPE_LEN,
+		"Ralink %s ver:%u eco:%u",
+		name,
+		(id >> RT3883_REVID_VER_ID_SHIFT) & RT3883_REVID_VER_ID_MASK,
+		(id & RT3883_REVID_ECO_ID_MASK));
+
+	soc_info->mem_base = RT3883_SDRAM_BASE;
+	soc_info->mem_size_min = RT3883_MEM_SIZE_MIN;
+	soc_info->mem_size_max = RT3883_MEM_SIZE_MAX;
+}