MIPS: PowerTV: Remove support code.

Nobody seems to care about this platform anymore and my attempts to find
somebody willing to provide some tlc for PowerTV have failed so far.

So let's nuke the bloody thing.

Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Patchwork: https://patchwork.linux-mips.org/patch/5910/

1 files changed, 0 insertions, 404 deletions

diff --git a/arch/mips/powertv/powertv-usb.c b/arch/mips/powertv/powertv-usb.c
deleted file mode 100644
index d845eac..0000000
--- a/arch/mips/powertv/powertv-usb.c
+++ /dev/null
@@ -1,404 +0,0 @@
-/*
- *				powertv-usb.c
- *
- * Description:	 ASIC-specific USB device setup and shutdown
- *
- * Copyright (C) 2005-2009 Scientific-Atlanta, Inc.
- * Copyright (C) 2009 Cisco Systems, Inc.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
- *
- * Author:	 Ken Eppinett
- *		 David Schleef <ds@schleef.org>
- *
- * NOTE: The bootloader allocates persistent memory at an address which is
- * 16 MiB below the end of the highest address in KSEG0. All fixed
- * address memory reservations must avoid this region.
- */
-
-#include <linux/kernel.h>
-#include <linux/export.h>
-#include <linux/ioport.h>
-#include <linux/platform_device.h>
-#include <asm/mach-powertv/asic.h>
-#include <asm/mach-powertv/interrupts.h>
-
-/* misc_clk_ctl1 values */
-#define MCC1_30MHZ_POWERUP_SELECT	(1 << 14)
-#define MCC1_DIV9			(1 << 13)
-#define MCC1_ETHMIPS_POWERUP_SELECT	(1 << 11)
-#define MCC1_USB_POWERUP_SELECT		(1 << 1)
-#define MCC1_CLOCK108_POWERUP_SELECT	(1 << 0)
-
-/* Possible values for clock select */
-#define MCC1_USB_CLOCK_HIGH_Z		(0 << 4)
-#define MCC1_USB_CLOCK_48MHZ		(1 << 4)
-#define MCC1_USB_CLOCK_24MHZ		(2 << 4)
-#define MCC1_USB_CLOCK_6MHZ		(3 << 4)
-
-#define MCC1_CONFIG	(MCC1_30MHZ_POWERUP_SELECT |		\
-			 MCC1_DIV9 |				\
-			 MCC1_ETHMIPS_POWERUP_SELECT |		\
-			 MCC1_USB_POWERUP_SELECT |		\
-			 MCC1_CLOCK108_POWERUP_SELECT)
-
-/* misc_clk_ctl2 values */
-#define MCC2_GMII_GCLK_TO_PAD		(1 << 31)
-#define MCC2_ETHER125_0_CLOCK_SELECT	(1 << 29)
-#define MCC2_RMII_0_CLOCK_SELECT	(1 << 28)
-#define MCC2_GMII_TX0_CLOCK_SELECT	(1 << 27)
-#define MCC2_GMII_RX0_CLOCK_SELECT	(1 << 26)
-#define MCC2_ETHER125_1_CLOCK_SELECT	(1 << 24)
-#define MCC2_RMII_1_CLOCK_SELECT	(1 << 23)
-#define MCC2_GMII_TX1_CLOCK_SELECT	(1 << 22)
-#define MCC2_GMII_RX1_CLOCK_SELECT	(1 << 21)
-#define MCC2_ETHER125_2_CLOCK_SELECT	(1 << 19)
-#define MCC2_RMII_2_CLOCK_SELECT	(1 << 18)
-#define MCC2_GMII_TX2_CLOCK_SELECT	(1 << 17)
-#define MCC2_GMII_RX2_CLOCK_SELECT	(1 << 16)
-
-#define ETHER_CLK_CONFIG	(MCC2_GMII_GCLK_TO_PAD |	\
-				 MCC2_ETHER125_0_CLOCK_SELECT | \
-				 MCC2_RMII_0_CLOCK_SELECT |	\
-				 MCC2_GMII_TX0_CLOCK_SELECT |	\
-				 MCC2_GMII_RX0_CLOCK_SELECT |	\
-				 MCC2_ETHER125_1_CLOCK_SELECT | \
-				 MCC2_RMII_1_CLOCK_SELECT |	\
-				 MCC2_GMII_TX1_CLOCK_SELECT |	\
-				 MCC2_GMII_RX1_CLOCK_SELECT |	\
-				 MCC2_ETHER125_2_CLOCK_SELECT | \
-				 MCC2_RMII_2_CLOCK_SELECT |	\
-				 MCC2_GMII_TX2_CLOCK_SELECT |	\
-				 MCC2_GMII_RX2_CLOCK_SELECT)
-
-/* misc_clk_ctl2 definitions for Gaia */
-#define FSX4A_REF_SELECT		(1 << 16)
-#define FSX4B_REF_SELECT		(1 << 17)
-#define FSX4C_REF_SELECT		(1 << 18)
-#define DDR_PLL_REF_SELECT		(1 << 19)
-#define MIPS_PLL_REF_SELECT		(1 << 20)
-
-/* Definitions for the QAM frequency select register FS432X4A4_QAM_CTL */
-#define QAM_FS_SDIV_SHIFT		29
-#define QAM_FS_MD_SHIFT			24
-#define QAM_FS_MD_MASK			0x1f	/* Cut down to 5 bits */
-#define QAM_FS_PE_SHIFT			8
-
-#define QAM_FS_DISABLE_DIVIDE_BY_3		(1 << 5)
-#define QAM_FS_ENABLE_PROGRAM			(1 << 4)
-#define QAM_FS_ENABLE_OUTPUT			(1 << 3)
-#define QAM_FS_SELECT_TEST_BYPASS		(1 << 2)
-#define QAM_FS_DISABLE_DIGITAL_STANDBY		(1 << 1)
-#define QAM_FS_CHOOSE_FS			(1 << 0)
-
-/* Definitions for fs432x4a_ctl register */
-#define QAM_FS_NSDIV_54MHZ			(1 << 2)
-
-/* Definitions for bcm1_usb2_ctl register */
-#define BCM1_USB2_CTL_BISTOK				(1 << 11)
-#define BCM1_USB2_CTL_PORT2_SHIFT_JK			(1 << 7)
-#define BCM1_USB2_CTL_PORT1_SHIFT_JK			(1 << 6)
-#define BCM1_USB2_CTL_PORT2_FAST_EDGE			(1 << 5)
-#define BCM1_USB2_CTL_PORT1_FAST_EDGE			(1 << 4)
-#define BCM1_USB2_CTL_EHCI_PRT_PWR_ACTIVE_HIGH		(1 << 1)
-#define BCM1_USB2_CTL_APP_PRT_OVRCUR_IN_ACTIVE_HIGH	(1 << 0)
-
-/* Definitions for crt_spare register */
-#define CRT_SPARE_PORT2_SHIFT_JK			(1 << 21)
-#define CRT_SPARE_PORT1_SHIFT_JK			(1 << 20)
-#define CRT_SPARE_PORT2_FAST_EDGE			(1 << 19)
-#define CRT_SPARE_PORT1_FAST_EDGE			(1 << 18)
-#define CRT_SPARE_DIVIDE_BY_9_FROM_432			(1 << 17)
-#define CRT_SPARE_USB_DIVIDE_BY_9			(1 << 16)
-
-/* Definitions for usb2_stbus_obc register */
-#define USB_STBUS_OBC_STORE32_LOAD32			0x3
-
-/* Definitions for usb2_stbus_mess_size register */
-#define USB2_STBUS_MESS_SIZE_2				0x1	/* 2 packets */
-
-/* Definitions for usb2_stbus_chunk_size register */
-#define USB2_STBUS_CHUNK_SIZE_2				0x1	/* 2 packets */
-
-/* Definitions for usb2_strap register */
-#define USB2_STRAP_HFREQ_SELECT				0x1
-
-/*
- * USB Host Resource Definition
- */
-
-static struct resource ehci_resources[] = {
-	{
-		.parent = &asic_resource,
-		.start	= 0,
-		.end	= 0xff,
-		.flags	= IORESOURCE_MEM,
-	},
-	{
-		.start	= irq_usbehci,
-		.end	= irq_usbehci,
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-static u64 ehci_dmamask = 0xffffffffULL;
-
-static struct platform_device ehci_device = {
-	.name = "powertv-ehci",
-	.id = 0,
-	.num_resources = 2,
-	.resource = ehci_resources,
-	.dev = {
-		.dma_mask = &ehci_dmamask,
-		.coherent_dma_mask = 0xffffffff,
-	},
-};
-
-static struct resource ohci_resources[] = {
-	{
-		.parent = &asic_resource,
-		.start	= 0,
-		.end	= 0xff,
-		.flags	= IORESOURCE_MEM,
-	},
-	{
-		.start	= irq_usbohci,
-		.end	= irq_usbohci,
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-static u64 ohci_dmamask = 0xffffffffULL;
-
-static struct platform_device ohci_device = {
-	.name = "powertv-ohci",
-	.id = 0,
-	.num_resources = 2,
-	.resource = ohci_resources,
-	.dev = {
-		.dma_mask = &ohci_dmamask,
-		.coherent_dma_mask = 0xffffffff,
-	},
-};
-
-static unsigned usb_users;
-static DEFINE_SPINLOCK(usb_regs_lock);
-
-/*
- *
- * fs_update - set frequency synthesizer for USB
- * @pe_bits		Phase tap setting
- * @md_bits		Coarse selector bus for algorithm of phase tap
- * @sdiv_bits		Output divider setting
- * @disable_div_by_3	Either QAM_FS_DISABLE_DIVIDE_BY_3 or zero
- * @standby		Either QAM_FS_DISABLE_DIGITAL_STANDBY or zero
- *
- * QAM frequency selection code, which affects the frequency at which USB
- * runs. The frequency is calculated as:
- *			       2^15 * ndiv * Fin
- * Fout = ------------------------------------------------------------
- *	  (sdiv * (ipe * (1 + md/32) - (ipe - 2^15)*(1 + (md + 1)/32)))
- * where:
- * Fin		54 MHz
- * ndiv		QAM_FS_NSDIV_54MHZ ? 8 : 16
- * sdiv		1 << (sdiv_bits + 1)
- * ipe		Same as pe_bits
- * md		A five-bit, two's-complement integer (range [-16, 15]), which
- *		is the lower 5 bits of md_bits.
- */
-static void fs_update(u32 pe_bits, int md_bits, u32 sdiv_bits,
-	u32 disable_div_by_3, u32 standby)
-{
-	u32 val;
-
-	val = ((sdiv_bits << QAM_FS_SDIV_SHIFT) |
-		((md_bits & QAM_FS_MD_MASK) << QAM_FS_MD_SHIFT) |
-		(pe_bits << QAM_FS_PE_SHIFT) |
-		QAM_FS_ENABLE_OUTPUT |
-		standby |
-		disable_div_by_3);
-	asic_write(val, fs432x4b4_usb_ctl);
-	asic_write(val | QAM_FS_ENABLE_PROGRAM, fs432x4b4_usb_ctl);
-	asic_write(val | QAM_FS_ENABLE_PROGRAM | QAM_FS_CHOOSE_FS,
-		fs432x4b4_usb_ctl);
-}
-
-/*
- * usb_eye_configure - for optimizing the shape USB eye waveform
- * @set:	Bits to set in the register
- * @clear:	Bits to clear in the register; each bit with a one will
- *		be set in the register, zero bits will not be modified
- */
-static void usb_eye_configure(u32 set, u32 clear)
-{
-	u32 old;
-
-	old = asic_read(crt_spare);
-	old |= set;
-	old &= ~clear;
-	asic_write(old, crt_spare);
-}
-
-/*
- * platform_configure_usb - usb configuration based on platform type.
- */
-static void platform_configure_usb(void)
-{
-	u32 bcm1_usb2_ctl_value;
-	enum asic_type asic_type;
-	unsigned long flags;
-
-	spin_lock_irqsave(&usb_regs_lock, flags);
-	usb_users++;
-
-	if (usb_users != 1) {
-		spin_unlock_irqrestore(&usb_regs_lock, flags);
-		return;
-	}
-
-	asic_type = platform_get_asic();
-
-	switch (asic_type) {
-	case ASIC_ZEUS:
-		fs_update(0x0000, -15, 0x02, 0, 0);
-		bcm1_usb2_ctl_value = BCM1_USB2_CTL_EHCI_PRT_PWR_ACTIVE_HIGH |
-			BCM1_USB2_CTL_APP_PRT_OVRCUR_IN_ACTIVE_HIGH;
-		break;
-
-	case ASIC_CRONUS:
-	case ASIC_CRONUSLITE:
-		usb_eye_configure(0, CRT_SPARE_USB_DIVIDE_BY_9);
-		fs_update(0x8000, -14, 0x03, QAM_FS_DISABLE_DIVIDE_BY_3,
-			QAM_FS_DISABLE_DIGITAL_STANDBY);
-		bcm1_usb2_ctl_value = BCM1_USB2_CTL_EHCI_PRT_PWR_ACTIVE_HIGH |
-			BCM1_USB2_CTL_APP_PRT_OVRCUR_IN_ACTIVE_HIGH;
-		break;
-
-	case ASIC_CALLIOPE:
-		fs_update(0x0000, -15, 0x02, QAM_FS_DISABLE_DIVIDE_BY_3,
-			QAM_FS_DISABLE_DIGITAL_STANDBY);
-
-		switch (platform_get_family()) {
-		case FAMILY_1500VZE:
-			break;
-
-		case FAMILY_1500VZF:
-			usb_eye_configure(CRT_SPARE_PORT2_SHIFT_JK |
-				CRT_SPARE_PORT1_SHIFT_JK |
-				CRT_SPARE_PORT2_FAST_EDGE |
-				CRT_SPARE_PORT1_FAST_EDGE, 0);
-			break;
-
-		default:
-			usb_eye_configure(CRT_SPARE_PORT2_SHIFT_JK |
-				CRT_SPARE_PORT1_SHIFT_JK, 0);
-			break;
-		}
-
-		bcm1_usb2_ctl_value = BCM1_USB2_CTL_BISTOK |
-			BCM1_USB2_CTL_EHCI_PRT_PWR_ACTIVE_HIGH |
-			BCM1_USB2_CTL_APP_PRT_OVRCUR_IN_ACTIVE_HIGH;
-		break;
-
-	case ASIC_GAIA:
-		fs_update(0x8000, -14, 0x03, QAM_FS_DISABLE_DIVIDE_BY_3,
-			QAM_FS_DISABLE_DIGITAL_STANDBY);
-		bcm1_usb2_ctl_value = BCM1_USB2_CTL_BISTOK |
-			BCM1_USB2_CTL_EHCI_PRT_PWR_ACTIVE_HIGH |
-			BCM1_USB2_CTL_APP_PRT_OVRCUR_IN_ACTIVE_HIGH;
-		break;
-
-	default:
-		pr_err("Unknown ASIC type: %d\n", asic_type);
-		bcm1_usb2_ctl_value = 0;
-		break;
-	}
-
-	/* turn on USB power */
-	asic_write(0, usb2_strap);
-	/* Enable all OHCI interrupts */
-	asic_write(bcm1_usb2_ctl_value, usb2_control);
-	/* usb2_stbus_obc store32/load32 */
-	asic_write(USB_STBUS_OBC_STORE32_LOAD32, usb2_stbus_obc);
-	/* usb2_stbus_mess_size 2 packets */
-	asic_write(USB2_STBUS_MESS_SIZE_2, usb2_stbus_mess_size);
-	/* usb2_stbus_chunk_size 2 packets */
-	asic_write(USB2_STBUS_CHUNK_SIZE_2, usb2_stbus_chunk_size);
-	spin_unlock_irqrestore(&usb_regs_lock, flags);
-}
-
-static void platform_unconfigure_usb(void)
-{
-	unsigned long flags;
-
-	spin_lock_irqsave(&usb_regs_lock, flags);
-	usb_users--;
-	if (usb_users == 0)
-		asic_write(USB2_STRAP_HFREQ_SELECT, usb2_strap);
-	spin_unlock_irqrestore(&usb_regs_lock, flags);
-}
-
-/*
- * Set up the USB EHCI interface
- */
-void platform_configure_usb_ehci()
-{
-	platform_configure_usb();
-}
-EXPORT_SYMBOL(platform_configure_usb_ehci);
-
-/*
- * Set up the USB OHCI interface
- */
-void platform_configure_usb_ohci()
-{
-	platform_configure_usb();
-}
-EXPORT_SYMBOL(platform_configure_usb_ohci);
-
-/*
- * Shut the USB EHCI interface down
- */
-void platform_unconfigure_usb_ehci()
-{
-	platform_unconfigure_usb();
-}
-EXPORT_SYMBOL(platform_unconfigure_usb_ehci);
-
-/*
- * Shut the USB OHCI interface down
- */
-void platform_unconfigure_usb_ohci()
-{
-	platform_unconfigure_usb();
-}
-EXPORT_SYMBOL(platform_unconfigure_usb_ohci);
-
-/**
- * platform_devices_init - sets up USB device resourse.
- */
-int __init platform_usb_devices_init(struct platform_device **ehci_dev,
-	struct platform_device **ohci_dev)
-{
-	*ehci_dev = &ehci_device;
-	ehci_resources[0].start = asic_reg_phys_addr(ehci_hcapbase);
-	ehci_resources[0].end += ehci_resources[0].start;
-
-	*ohci_dev = &ohci_device;
-	ohci_resources[0].start = asic_reg_phys_addr(ohci_hc_revision);
-	ohci_resources[0].end += ohci_resources[0].start;
-
-	return 0;
-}