MIPS: SEAD3: Probe EHCI controller using DT

Probe the SEAD3 EHCI controller using the generic-ehci driver & device
tree rather than platform code, in order to reduce the amount of the
latter.

Now that no devices probed from platform code require interrupts, remove
the retrieval of the IRQ domain & sead3int.h.

Signed-off-by: Paul Burton <paul.burton@imgtec.com>
Cc: Rob Herring <robh+dt@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: linux-mips@linux-mips.org
Cc: devicetree@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Patchwork: https://patchwork.linux-mips.org/patch/14051/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

2 files changed, 14 insertions, 60 deletions

diff --git a/arch/mips/mti-sead3/sead3-dtshim.c b/arch/mips/mti-sead3/sead3-dtshim.c
index 279d8d4..6e32ceb 100644
--- a/arch/mips/mti-sead3/sead3-dtshim.c
+++ b/arch/mips/mti-sead3/sead3-dtshim.c
@@ -24,9 +24,10 @@ static unsigned char fdt_buf[16 << 10] __initdata;
 
 static int remove_gic(void *fdt)
 {
+	const unsigned int cpu_ehci_int = 2;
 	const unsigned int cpu_uart_int = 4;
 	const unsigned int cpu_eth_int = 6;
-	int gic_off, cpu_off, uart_off, eth_off, err;
+	int gic_off, cpu_off, uart_off, eth_off, ehci_off, err;
 	uint32_t cfg, cpu_phandle;
 
 	/* leave the GIC node intact if a GIC is present */
@@ -95,6 +96,18 @@ static int remove_gic(void *fdt)
 		return err;
 	}
 
+	ehci_off = fdt_node_offset_by_compatible(fdt, -1, "mti,sead3-ehci");
+	if (ehci_off < 0) {
+		pr_err("unable to find EHCI DT node: %d\n", ehci_off);
+		return ehci_off;
+	}
+
+	err = fdt_setprop_u32(fdt, ehci_off, "interrupts", cpu_ehci_int);
+	if (err) {
+		pr_err("unable to set EHCI interrupts property: %d\n", err);
+		return err;
+	}
+
 	return 0;
 }
 
diff --git a/arch/mips/mti-sead3/sead3-platform.c b/arch/mips/mti-sead3/sead3-platform.c
index 9f9e914..21047b5 100644
--- a/arch/mips/mti-sead3/sead3-platform.c
+++ b/arch/mips/mti-sead3/sead3-platform.c
@@ -7,16 +7,10 @@
  */
 #include <linux/dma-mapping.h>
 #include <linux/init.h>
-#include <linux/irq.h>
-#include <linux/irqchip/mips-gic.h>
-#include <linux/irqdomain.h>
 #include <linux/leds.h>
 #include <linux/mtd/physmap.h>
-#include <linux/of.h>
 #include <linux/platform_device.h>
 
-#include <asm/mips-boards/sead3int.h>
-
 static struct mtd_partition sead3_mtd_partitions[] = {
 	{
 		.name =		"User FS",
@@ -118,68 +112,15 @@ static struct platform_device sead3_led_device = {
         .id     = -1,
 };
 
-static struct resource ehci_resources[] = {
-	{
-		.start			= 0x1b200000,
-		.end			= 0x1b200fff,
-		.flags			= IORESOURCE_MEM
-	}, {
-		.flags			= IORESOURCE_IRQ
-	}
-};
-
-static u64 sead3_usbdev_dma_mask = DMA_BIT_MASK(32);
-
-static struct platform_device ehci_device = {
-	.name		= "sead3-ehci",
-	.id		= 0,
-	.dev		= {
-		.dma_mask		= &sead3_usbdev_dma_mask,
-		.coherent_dma_mask	= DMA_BIT_MASK(32)
-	},
-	.num_resources	= ARRAY_SIZE(ehci_resources),
-	.resource	= ehci_resources
-};
-
 static struct platform_device *sead3_platform_devices[] __initdata = {
 	&sead3_flash,
 	&pled_device,
 	&fled_device,
 	&sead3_led_device,
-	&ehci_device,
 };
 
 static int __init sead3_platforms_device_init(void)
 {
-	const char *intc_compat;
-	struct device_node *node;
-	struct irq_domain *irqd;
-
-	if (gic_present)
-		intc_compat = "mti,gic";
-	else
-		intc_compat = "mti,cpu-interrupt-controller";
-
-	node = of_find_compatible_node(NULL, NULL, intc_compat);
-	if (!node) {
-		pr_err("unable to find interrupt controller DT node\n");
-		return -ENODEV;
-	}
-
-	irqd = irq_find_host(node);
-	if (!irqd) {
-		pr_err("unable to find interrupt controller IRQ domain\n");
-		return -ENODEV;
-	}
-
-	if (gic_present) {
-		ehci_resources[1].start =
-			irq_create_mapping(irqd, GIC_INT_EHCI);
-	} else {
-		ehci_resources[1].start =
-			irq_create_mapping(irqd, CPU_INT_EHCI);
-	}
-
 	return platform_add_devices(sead3_platform_devices,
 				    ARRAY_SIZE(sead3_platform_devices));
 }