mips: convert to clocksource_register_hz/khz

This converts the mips clocksources to use clocksource_register_hz/khz

CC: Ralf Baechle <ralf@linux-mips.org>
CC: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: John Stultz <johnstul@us.ibm.com>

7 files changed, 9 insertions, 48 deletions

diff --git a/arch/mips/kernel/cevt-txx9.c b/arch/mips/kernel/cevt-txx9.c
index 0b73773..f0ab92a 100644
--- a/arch/mips/kernel/cevt-txx9.c
+++ b/arch/mips/kernel/cevt-txx9.c
@@ -51,8 +51,7 @@ void __init txx9_clocksource_init(unsigned long baseaddr,
 {
 	struct txx9_tmr_reg __iomem *tmrptr;
 
-	clocksource_set_clock(&txx9_clocksource.cs, TIMER_CLK(imbusclk));
-	clocksource_register(&txx9_clocksource.cs);
+	clocksource_register_hz(&txx9_clocksource.cs, TIMER_CLK(imbusclk));
 
 	tmrptr = ioremap(baseaddr, sizeof(struct txx9_tmr_reg));
 	__raw_writel(TCR_BASE, &tmrptr->tcr);
diff --git a/arch/mips/kernel/csrc-bcm1480.c b/arch/mips/kernel/csrc-bcm1480.c
index 51489f8..f96f99c 100644
--- a/arch/mips/kernel/csrc-bcm1480.c
+++ b/arch/mips/kernel/csrc-bcm1480.c
@@ -49,6 +49,5 @@ void __init sb1480_clocksource_init(void)
 
 	plldiv = G_BCM1480_SYS_PLL_DIV(__raw_readq(IOADDR(A_SCD_SYSTEM_CFG)));
 	zbbus = ((plldiv >> 1) * 50000000) + ((plldiv & 1) * 25000000);
-	clocksource_set_clock(cs, zbbus);
-	clocksource_register(cs);
+	clocksource_register_hz(cs, zbbus);
 }
diff --git a/arch/mips/kernel/csrc-ioasic.c b/arch/mips/kernel/csrc-ioasic.c
index 23da108..46bd7fa 100644
--- a/arch/mips/kernel/csrc-ioasic.c
+++ b/arch/mips/kernel/csrc-ioasic.c
@@ -59,7 +59,5 @@ void __init dec_ioasic_clocksource_init(void)
 	printk(KERN_INFO "I/O ASIC clock frequency %dHz\n", freq);
 
 	clocksource_dec.rating = 200 + freq / 10000000;
-	clocksource_set_clock(&clocksource_dec, freq);
-
-	clocksource_register(&clocksource_dec);
+	clocksource_register_hz(&clocksource_dec, freq);
 }
diff --git a/arch/mips/kernel/csrc-powertv.c b/arch/mips/kernel/csrc-powertv.c
index a27c16c..2e7c523 100644
--- a/arch/mips/kernel/csrc-powertv.c
+++ b/arch/mips/kernel/csrc-powertv.c
@@ -78,9 +78,7 @@ static void __init powertv_c0_hpt_clocksource_init(void)
 
 	clocksource_mips.rating = 200 + mips_hpt_frequency / 10000000;
 
-	clocksource_set_clock(&clocksource_mips, mips_hpt_frequency);
-
-	clocksource_register(&clocksource_mips);
+	clocksource_register_hz(&clocksource_mips, mips_hpt_frequency);
 }
 
 /**
@@ -130,43 +128,16 @@ static struct clocksource clocksource_tim_c = {
 /**
  * powertv_tim_c_clocksource_init - set up a clock source for the TIM_C clock
  *
- * The hard part here is coming up with a constant k and shift s such that
- * the 48-bit TIM_C value multiplied by k doesn't overflow and that value,
- * when shifted right by s, yields the corresponding number of nanoseconds.
  * We know that TIM_C counts at 27 MHz/8, so each cycle corresponds to
- * 1 / (27,000,000/8) seconds. Multiply that by a billion and you get the
- * number of nanoseconds. Since the TIM_C value has 48 bits and the math is
- * done in 64 bits, avoiding an overflow means that k must be less than
- * 64 - 48 = 16 bits.
+ * 1 / (27,000,000/8) seconds.
  */
 static void __init powertv_tim_c_clocksource_init(void)
 {
-	int			prescale;
-	unsigned long		dividend;
-	unsigned long		k;
-	int			s;
-	const int		max_k_bits = (64 - 48) - 1;
-	const unsigned long	billion = 1000000000;
 	const unsigned long	counts_per_second = 27000000 / 8;
 
-	prescale = BITS_PER_LONG - ilog2(billion) - 1;
-	dividend = billion << prescale;
-	k = dividend / counts_per_second;
-	s = ilog2(k) - max_k_bits;
-
-	if (s < 0)
-		s = prescale;
-
-	else {
-		k >>= s;
-		s += prescale;
-	}
-
-	clocksource_tim_c.mult = k;
-	clocksource_tim_c.shift = s;
 	clocksource_tim_c.rating = 200;
 
-	clocksource_register(&clocksource_tim_c);
+	clocksource_register_hz(&clocksource_tim_c, counts_per_second);
 	tim_c = (struct tim_c *) asic_reg_addr(tim_ch);
 }
 
diff --git a/arch/mips/kernel/csrc-r4k.c b/arch/mips/kernel/csrc-r4k.c
index e95a3cd..decd1fa 100644
--- a/arch/mips/kernel/csrc-r4k.c
+++ b/arch/mips/kernel/csrc-r4k.c
@@ -30,9 +30,7 @@ int __init init_r4k_clocksource(void)
 	/* Calculate a somewhat reasonable rating value */
 	clocksource_mips.rating = 200 + mips_hpt_frequency / 10000000;
 
-	clocksource_set_clock(&clocksource_mips, mips_hpt_frequency);
-
-	clocksource_register(&clocksource_mips);
+	clocksource_register_hz(&clocksource_mips, mips_hpt_frequency);
 
 	return 0;
 }
diff --git a/arch/mips/kernel/csrc-sb1250.c b/arch/mips/kernel/csrc-sb1250.c
index d14d3d1..e9606d9 100644
--- a/arch/mips/kernel/csrc-sb1250.c
+++ b/arch/mips/kernel/csrc-sb1250.c
@@ -65,6 +65,5 @@ void __init sb1250_clocksource_init(void)
 		     IOADDR(A_SCD_TIMER_REGISTER(SB1250_HPT_NUM,
 						 R_SCD_TIMER_CFG)));
 
-	clocksource_set_clock(cs, V_SCD_TIMER_FREQ);
-	clocksource_register(cs);
+	clocksource_register_hz(cs, V_SCD_TIMER_FREQ);
 }
diff --git a/arch/mips/kernel/i8253.c b/arch/mips/kernel/i8253.c
index 2392a7a2..9fadd17 100644
--- a/arch/mips/kernel/i8253.c
+++ b/arch/mips/kernel/i8253.c
@@ -196,8 +196,6 @@ static struct clocksource clocksource_pit = {
 	.rating = 110,
 	.read	= pit_read,
 	.mask	= CLOCKSOURCE_MASK(32),
-	.mult	= 0,
-	.shift	= 20,
 };
 
 static int __init init_pit_clocksource(void)
@@ -205,7 +203,6 @@ static int __init init_pit_clocksource(void)
 	if (num_possible_cpus() > 1) /* PIT does not scale! */
 		return 0;
 
-	clocksource_pit.mult = clocksource_hz2mult(CLOCK_TICK_RATE, 20);
-	return clocksource_register(&clocksource_pit);
+	return clocksource_register_hz(&clocksource_pit, CLOCK_TICK_RATE);
 }
 arch_initcall(init_pit_clocksource);