MIPS: Fix FCSR Cause bit handling for correct SIGFPE issue

Sanitize FCSR Cause bit handling, following a trail of past attempts:

* commit 4249548454f7 ("MIPS: ptrace: Fix FP context restoration FCSR
regression"),

* commit 443c44032a54 ("MIPS: Always clear FCSR cause bits after
emulation"),

* commit 64bedffe4968 ("MIPS: Clear [MSA]FPE CSR.Cause after
notify_die()"),

* commit b1442d39fac2 ("MIPS: Prevent user from setting FCSR cause
bits"),

* commit b54d2901517d ("Properly handle branch delay slots in connection
with signals.").

Specifically do not mask these bits out in ptrace(2) processing and send
a SIGFPE signal instead whenever a matching pair of an FCSR Cause and
Enable bit is seen as execution of an affected context is about to
resume.  Only then clear Cause bits, and even then do not clear any bits
that are set but masked with the respective Enable bits.  Adjust Cause
bit clearing throughout code likewise, except within the FPU emulator
proper where they are set according to IEEE 754 exceptions raised as the
operation emulated executed.  Do so so that any IEEE 754 exceptions
subject to their default handling are recorded like with operations
executed by FPU hardware.

Signed-off-by: Maciej W. Rozycki <macro@imgtec.com>
Cc: Paul Burton <paul.burton@imgtec.com>
Cc: James Hogan <james.hogan@imgtec.com>
Cc: linux-mips@linux-mips.org
Cc: linux-kernel@vger.kernel.org
Patchwork: https://patchwork.linux-mips.org/patch/14460/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

1 files changed, 39 insertions, 33 deletions

diff --git a/arch/mips/kernel/traps.c b/arch/mips/kernel/traps.c
index b9a910b..3905003 100644
--- a/arch/mips/kernel/traps.c
+++ b/arch/mips/kernel/traps.c
@@ -708,6 +708,32 @@ asmlinkage void do_ov(struct pt_regs *regs)
 	exception_exit(prev_state);
 }
 
+/*
+ * Send SIGFPE according to FCSR Cause bits, which must have already
+ * been masked against Enable bits.  This is impotant as Inexact can
+ * happen together with Overflow or Underflow, and `ptrace' can set
+ * any bits.
+ */
+void force_fcr31_sig(unsigned long fcr31, void __user *fault_addr,
+		     struct task_struct *tsk)
+{
+	struct siginfo si = { .si_addr = fault_addr, .si_signo = SIGFPE };
+
+	if (fcr31 & FPU_CSR_INV_X)
+		si.si_code = FPE_FLTINV;
+	else if (fcr31 & FPU_CSR_DIV_X)
+		si.si_code = FPE_FLTDIV;
+	else if (fcr31 & FPU_CSR_OVF_X)
+		si.si_code = FPE_FLTOVF;
+	else if (fcr31 & FPU_CSR_UDF_X)
+		si.si_code = FPE_FLTUND;
+	else if (fcr31 & FPU_CSR_INE_X)
+		si.si_code = FPE_FLTRES;
+	else
+		si.si_code = __SI_FAULT;
+	force_sig_info(SIGFPE, &si, tsk);
+}
+
 int process_fpemu_return(int sig, void __user *fault_addr, unsigned long fcr31)
 {
 	struct siginfo si = { 0 };
@@ -718,27 +744,7 @@ int process_fpemu_return(int sig, void __user *fault_addr, unsigned long fcr31)
 		return 0;
 
 	case SIGFPE:
-		si.si_addr = fault_addr;
-		si.si_signo = sig;
-		/*
-		 * Inexact can happen together with Overflow or Underflow.
-		 * Respect the mask to deliver the correct exception.
-		 */
-		fcr31 &= (fcr31 & FPU_CSR_ALL_E) <<
-			 (ffs(FPU_CSR_ALL_X) - ffs(FPU_CSR_ALL_E));
-		if (fcr31 & FPU_CSR_INV_X)
-			si.si_code = FPE_FLTINV;
-		else if (fcr31 & FPU_CSR_DIV_X)
-			si.si_code = FPE_FLTDIV;
-		else if (fcr31 & FPU_CSR_OVF_X)
-			si.si_code = FPE_FLTOVF;
-		else if (fcr31 & FPU_CSR_UDF_X)
-			si.si_code = FPE_FLTUND;
-		else if (fcr31 & FPU_CSR_INE_X)
-			si.si_code = FPE_FLTRES;
-		else
-			si.si_code = __SI_FAULT;
-		force_sig_info(sig, &si, current);
+		force_fcr31_sig(fcr31, fault_addr, current);
 		return 1;
 
 	case SIGBUS:
@@ -802,13 +808,13 @@ static int simulate_fp(struct pt_regs *regs, unsigned int opcode,
 	/* Run the emulator */
 	sig = fpu_emulator_cop1Handler(regs, &current->thread.fpu, 1,
 				       &fault_addr);
-	fcr31 = current->thread.fpu.fcr31;
 
 	/*
-	 * We can't allow the emulated instruction to leave any of
-	 * the cause bits set in $fcr31.
+	 * We can't allow the emulated instruction to leave any
+	 * enabled Cause bits set in $fcr31.
 	 */
-	current->thread.fpu.fcr31 &= ~FPU_CSR_ALL_X;
+	fcr31 = mask_fcr31_x(current->thread.fpu.fcr31);
+	current->thread.fpu.fcr31 &= ~fcr31;
 
 	/* Restore the hardware register state */
 	own_fpu(1);
@@ -834,7 +840,7 @@ asmlinkage void do_fpe(struct pt_regs *regs, unsigned long fcr31)
 		goto out;
 
 	/* Clear FCSR.Cause before enabling interrupts */
-	write_32bit_cp1_register(CP1_STATUS, fcr31 & ~FPU_CSR_ALL_X);
+	write_32bit_cp1_register(CP1_STATUS, fcr31 & ~mask_fcr31_x(fcr31));
 	local_irq_enable();
 
 	die_if_kernel("FP exception in kernel code", regs);
@@ -856,13 +862,13 @@ asmlinkage void do_fpe(struct pt_regs *regs, unsigned long fcr31)
 		/* Run the emulator */
 		sig = fpu_emulator_cop1Handler(regs, &current->thread.fpu, 1,
 					       &fault_addr);
-		fcr31 = current->thread.fpu.fcr31;
 
 		/*
-		 * We can't allow the emulated instruction to leave any of
-		 * the cause bits set in $fcr31.
+		 * We can't allow the emulated instruction to leave any
+		 * enabled Cause bits set in $fcr31.
 		 */
-		current->thread.fpu.fcr31 &= ~FPU_CSR_ALL_X;
+		fcr31 = mask_fcr31_x(current->thread.fpu.fcr31);
+		current->thread.fpu.fcr31 &= ~fcr31;
 
 		/* Restore the hardware register state */
 		own_fpu(1);	/* Using the FPU again.	 */
@@ -1427,13 +1433,13 @@ asmlinkage void do_cpu(struct pt_regs *regs)
 
 		sig = fpu_emulator_cop1Handler(regs, &current->thread.fpu, 0,
 					       &fault_addr);
-		fcr31 = current->thread.fpu.fcr31;
 
 		/*
 		 * We can't allow the emulated instruction to leave
-		 * any of the cause bits set in $fcr31.
+		 * any enabled Cause bits set in $fcr31.
 		 */
-		current->thread.fpu.fcr31 &= ~FPU_CSR_ALL_X;
+		fcr31 = mask_fcr31_x(current->thread.fpu.fcr31);
+		current->thread.fpu.fcr31 &= ~fcr31;
 
 		/* Send a signal if required.  */
 		if (!process_fpemu_return(sig, fault_addr, fcr31) && !err)