[MIPS] Remove IT8172-based platforms, ITE 8172G and Globespan IVR support.

As per feature-removal-schedule.txt.

Signed-off-by: Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp>
Acked-by: Alan Cox <alan@redhat.com>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

1 files changed, 0 insertions, 352 deletions

diff --git a/arch/mips/ite-boards/generic/it8172_setup.c b/arch/mips/ite-boards/generic/it8172_setup.c
deleted file mode 100644
index 07faf3c..0000000
--- a/arch/mips/ite-boards/generic/it8172_setup.c
+++ /dev/null
@@ -1,352 +0,0 @@
-/*
- * BRIEF MODULE DESCRIPTION
- *	IT8172/QED5231 board setup.
- *
- * Copyright 2000 MontaVista Software Inc.
- * Author: MontaVista Software, Inc.
- *         	ppopov@mvista.com or source@mvista.com
- *
- *  This program is free software; you can redistribute  it and/or modify it
- *  under  the terms of  the GNU General  Public License as published by the
- *  Free Software Foundation;  either version 2 of the  License, or (at your
- *  option) any later version.
- *
- *  THIS  SOFTWARE  IS PROVIDED   ``AS  IS'' AND   ANY  EXPRESS OR IMPLIED
- *  WARRANTIES,   INCLUDING, BUT NOT  LIMITED  TO, THE IMPLIED WARRANTIES OF
- *  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN
- *  NO  EVENT  SHALL   THE AUTHOR  BE    LIABLE FOR ANY   DIRECT, INDIRECT,
- *  INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
- *  NOT LIMITED   TO, PROCUREMENT OF  SUBSTITUTE GOODS  OR SERVICES; LOSS OF
- *  USE, DATA,  OR PROFITS; OR  BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
- *  ANY THEORY OF LIABILITY, WHETHER IN  CONTRACT, STRICT LIABILITY, OR TORT
- *  (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
- *  THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *
- *  You should have received a copy of the  GNU General Public License along
- *  with this program; if not, write  to the Free Software Foundation, Inc.,
- *  675 Mass Ave, Cambridge, MA 02139, USA.
- */
-#include <linux/init.h>
-#include <linux/sched.h>
-#include <linux/ioport.h>
-#include <linux/irq.h>
-#include <linux/serial_reg.h>
-#include <linux/major.h>
-#include <linux/kdev_t.h>
-#include <linux/root_dev.h>
-#include <linux/pm.h>
-
-#include <asm/cpu.h>
-#include <asm/time.h>
-#include <asm/io.h>
-#include <asm/bootinfo.h>
-#include <asm/irq.h>
-#include <asm/mipsregs.h>
-#include <asm/reboot.h>
-#include <asm/traps.h>
-#include <asm/it8172/it8172.h>
-#include <asm/it8712.h>
-
-extern struct resource ioport_resource;
-#ifdef CONFIG_SERIO_I8042
-int init_8712_keyboard(void);
-#endif
-
-extern int SearchIT8712(void);
-extern void InitLPCInterface(void);
-extern char * __init prom_getcmdline(void);
-extern void it8172_restart(char *command);
-extern void it8172_halt(void);
-extern void it8172_power_off(void);
-
-extern void it8172_time_init(void);
-
-#ifdef CONFIG_IT8172_REVC
-struct {
-    struct resource ram;
-    struct resource pci_mem;
-    struct resource pci_io;
-    struct resource flash;
-    struct resource boot;
-} it8172_resources = {
-	{
-		.start	= 0,				/* to be initted */
-		.end	= 0,
-		.name	= "RAM",
-		.flags	= IORESOURCE_MEM
-	}, {
-		.start	= 0x10000000,
-		.end	= 0x13FFFFFF,
-		.name	= "PCI Mem",
-		.flags	= IORESOURCE_MEM
-	}, {
-		.start	= 0x14000000,
-		.end	= 0x17FFFFFF
-		.name	= "PCI I/O",
-	}, {
-		.start	= 0x08000000,
-		.end	= 0x0CFFFFFF
-		.name	= "Flash",
-	}, {
-		.start	= 0x1FC00000,
-		.end	= 0x1FFFFFFF
-		.name	= "Boot ROM",
-	}
-};
-#else
-struct {
-    struct resource ram;
-    struct resource pci_mem0;
-    struct resource pci_mem1;
-    struct resource pci_io;
-    struct resource pci_mem2;
-    struct resource pci_mem3;
-    struct resource flash;
-    struct resource boot;
-} it8172_resources = {
-	{
-		.start	= 0,				/* to be initted */
-		.end	= 0,
-		.name	= "RAM",
-		.flags	= IORESOURCE_MEM
-	}, {
-		.start	= 0x0C000000,
-		.end	= 0x0FFFFFFF,
-		.name	= "PCI Mem0",
-		.flags	= IORESOURCE_MEM
-	 }, {
-		.start	= 0x10000000,
-		.end	= 0x13FFFFFF,
-		.name	= "PCI Mem1",
-		.flags	= IORESOURCE_MEM
-	 }, {
-		.start	= 0x14000000,
-		.end	= 0x17FFFFFF
-		.name	= "PCI I/O",
-	}, {
-		.start	= 0x1A000000,
-		.end	= 0x1BFFFFFF,
-		.name	= "PCI Mem2",
-		.flags	= IORESOURCE_MEM
-	}, {
-		.start	= 0x1C000000,
-		.end	= 0x1FBFFFFF,
-		.name	= "PCI Mem3",
-		.flags	= IORESOURCE_MEM
-	}, {
-		.start	= 0x08000000,
-		.end	= 0x0CFFFFFF
-		.name	= "Flash",
-	}, {
-		.start	= 0x1FC00000,
-		.end	= 0x1FFFFFFF
-		.name	= "Boot ROM",
-	}
-};
-#endif
-
-
-void __init it8172_init_ram_resource(unsigned long memsize)
-{
-	it8172_resources.ram.end = memsize;
-}
-
-void __init plat_mem_setup(void)
-{
-	unsigned short dsr;
-	char *argptr;
-
-	argptr = prom_getcmdline();
-#ifdef CONFIG_SERIAL_CONSOLE
-	if ((argptr = strstr(argptr, "console=")) == NULL) {
-		argptr = prom_getcmdline();
-		strcat(argptr, " console=ttyS0,115200");
-	}
-#endif
-
-	clear_c0_status(ST0_FR);
-
-	board_time_init = it8172_time_init;
-
-	_machine_restart = it8172_restart;
-	_machine_halt = it8172_halt;
-	pm_power_off = it8172_power_off;
-
-	/*
-	 * IO/MEM resources.
-	 *
-	 * revisit this area.
-	 */
-	set_io_port_base(KSEG1);
-	ioport_resource.start = it8172_resources.pci_io.start;
-	ioport_resource.end = it8172_resources.pci_io.end;
-#ifdef CONFIG_IT8172_REVC
-	iomem_resource.start = it8172_resources.pci_mem.start;
-	iomem_resource.end = it8172_resources.pci_mem.end;
-#else
-	iomem_resource.start = it8172_resources.pci_mem0.start;
-	iomem_resource.end = it8172_resources.pci_mem3.end;
-#endif
-
-#ifdef CONFIG_BLK_DEV_INITRD
-	ROOT_DEV = Root_RAM0;
-#endif
-
-	/*
-	 * Pull enabled devices out of standby
-	 */
-	IT_IO_READ16(IT_PM_DSR, dsr);
-
-	/*
-	 * Fixme: This breaks when these drivers are modules!!!
-	 */
-#ifdef CONFIG_SOUND_IT8172
-	dsr &= ~IT_PM_DSR_ACSB;
-#else
-	dsr |= IT_PM_DSR_ACSB;
-#endif
-#ifdef CONFIG_BLK_DEV_IT8172
-	dsr &= ~IT_PM_DSR_IDESB;
-#else
-	dsr |= IT_PM_DSR_IDESB;
-#endif
-	IT_IO_WRITE16(IT_PM_DSR, dsr);
-
-	InitLPCInterface();
-
-#ifdef CONFIG_MIPS_ITE8172
-	if (SearchIT8712()) {
-		printk("Found IT8712 Super IO\n");
-		/* enable IT8712 serial port */
-		LPCSetConfig(LDN_SERIAL1, 0x30, 0x01); /* enable */
-		LPCSetConfig(LDN_SERIAL1, 0x23, 0x01); /* clock selection */
-#ifdef CONFIG_SERIO_I8042
-		if (init_8712_keyboard()) {
-			printk("Unable to initialize keyboard\n");
-			LPCSetConfig(LDN_KEYBOARD, 0x30, 0x0); /* disable keyboard */
-		} else {
-			LPCSetConfig(LDN_KEYBOARD, 0x30, 0x1); /* enable keyboard */
-			LPCSetConfig(LDN_KEYBOARD, 0xf0, 0x2);
-			LPCSetConfig(LDN_KEYBOARD, 0x71, 0x3);
-
-			LPCSetConfig(LDN_MOUSE, 0x30, 0x1); /* enable mouse */
-
-			LPCSetConfig(0x4, 0x30, 0x1);
-			LPCSetConfig(0x4, 0xf4, LPCGetConfig(0x4, 0xf4) | 0x80);
-
-			if ((LPCGetConfig(LDN_KEYBOARD, 0x30) == 0) ||
-					(LPCGetConfig(LDN_MOUSE, 0x30) == 0))
-				printk("Error: keyboard or mouse not enabled\n");
-
-		}
-#endif
-	}
-	else {
-		printk("IT8712 Super IO not found\n");
-	}
-#endif
-
-#ifdef CONFIG_IT8172_CIR
-	{
-		unsigned long data;
-		//printk("Enabling CIR0\n");
-		IT_IO_READ16(IT_PM_DSR, data);
-		data &= ~IT_PM_DSR_CIR0SB;
-		IT_IO_WRITE16(IT_PM_DSR, data);
-		//printk("DSR register: %x\n", (unsigned)IT_IO_READ16(IT_PM_DSR, data));
-	}
-#endif
-#ifdef CONFIG_IT8172_SCR0
-	{
-		unsigned i;
-		/* Enable Smart Card Reader 0 */
-		/* First power it up */
-		IT_IO_READ16(IT_PM_DSR, i);
-		i &= ~IT_PM_DSR_SCR0SB;
-		IT_IO_WRITE16(IT_PM_DSR, i);
-		/* Then initialize its registers */
-		outb(( IT_SCR_SFR_GATE_UART_OFF     << IT_SCR_SFR_GATE_UART_BIT
-		      |IT_SCR_SFR_FET_CHARGE_213_US << IT_SCR_SFR_FET_CHARGE_BIT
-		      |IT_SCR_SFR_CARD_FREQ_3_5_MHZ << IT_SCR_SFR_CARD_FREQ_BIT
-		      |IT_SCR_SFR_FET_ACTIVE_INVERT << IT_SCR_SFR_FET_ACTIVE_BIT
-		      |IT_SCR_SFR_ENABLE_ON         << IT_SCR_SFR_ENABLE_BIT),
-		     IT8172_PCI_IO_BASE + IT_SCR0_BASE + IT_SCR_SFR);
-		outb(IT_SCR_SCDR_RESET_MODE_ASYNC << IT_SCR_SCDR_RESET_MODE_BIT,
-		     IT8172_PCI_IO_BASE + IT_SCR0_BASE + IT_SCR_SCDR);
-	}
-#endif /* CONFIG_IT8172_SCR0 */
-#ifdef CONFIG_IT8172_SCR1
-	{
-		unsigned i;
-		/* Enable Smart Card Reader 1 */
-		/* First power it up */
-		IT_IO_READ16(IT_PM_DSR, i);
-		i &= ~IT_PM_DSR_SCR1SB;
-		IT_IO_WRITE16(IT_PM_DSR, i);
-		/* Then initialize its registers */
-		outb(( IT_SCR_SFR_GATE_UART_OFF     << IT_SCR_SFR_GATE_UART_BIT
-		      |IT_SCR_SFR_FET_CHARGE_213_US << IT_SCR_SFR_FET_CHARGE_BIT
-		      |IT_SCR_SFR_CARD_FREQ_3_5_MHZ << IT_SCR_SFR_CARD_FREQ_BIT
-		      |IT_SCR_SFR_FET_ACTIVE_INVERT << IT_SCR_SFR_FET_ACTIVE_BIT
-		      |IT_SCR_SFR_ENABLE_ON         << IT_SCR_SFR_ENABLE_BIT),
-		     IT8172_PCI_IO_BASE + IT_SCR1_BASE + IT_SCR_SFR);
-		outb(IT_SCR_SCDR_RESET_MODE_ASYNC << IT_SCR_SCDR_RESET_MODE_BIT,
-		     IT8172_PCI_IO_BASE + IT_SCR1_BASE + IT_SCR_SCDR);
-	}
-#endif /* CONFIG_IT8172_SCR1 */
-}
-
-#ifdef CONFIG_SERIO_I8042
-/*
- * According to the ITE Special BIOS Note for waking up the
- * keyboard controller...
- */
-static int init_8712_keyboard(void)
-{
-	unsigned int cmd_port = 0x14000064;
-	unsigned int data_port = 0x14000060;
-	                         ^^^^^^^^^^^
-	Somebody here doesn't grok the concept of io ports.
-
-	unsigned char data;
-	int i;
-
-	outb(0xaa, cmd_port); /* send self-test cmd */
-	i = 0;
-	while (!(inb(cmd_port) & 0x1)) { /* wait output buffer full */
-		i++;
-		if (i > 0xffffff)
-			return 1;
-	}
-
-	data = inb(data_port);
-	outb(0xcb, cmd_port); /* set ps2 mode */
-	while (inb(cmd_port) & 0x2) { /* wait while input buffer full */
-		i++;
-		if (i > 0xffffff)
-			return 1;
-	}
-	outb(0x01, data_port);
-	while (inb(cmd_port) & 0x2) { /* wait while input buffer full */
-		i++;
-		if (i > 0xffffff)
-			return 1;
-	}
-
-	outb(0x60, cmd_port); /* write 8042 command byte */
-	while (inb(cmd_port) & 0x2) { /* wait while input buffer full */
-		i++;
-		if (i > 0xffffff)
-			return 1;
-	}
-	outb(0x45, data_port); /* at interface, keyboard enabled, system flag */
-	while (inb(cmd_port) & 0x2) { /* wait while input buffer full */
-		i++;
-		if (i > 0xffffff)
-			return 1;
-	}
-
-	outb(0xae, cmd_port); /* enable interface */
-	return 0;
-}
-#endif