MIPS: Move headfiles to new location below arch/mips/include

Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

9 files changed, 1689 insertions, 0 deletions

diff --git a/arch/mips/include/asm/pmc-sierra/msp71xx/gpio.h b/arch/mips/include/asm/pmc-sierra/msp71xx/gpio.h
new file mode 100644
index 0000000..ebdbab9
--- /dev/null
+++ b/arch/mips/include/asm/pmc-sierra/msp71xx/gpio.h
@@ -0,0 +1,46 @@
+/*
+ * include/asm-mips/pmc-sierra/msp71xx/gpio.h
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * @author Patrick Glass <patrickglass@gmail.com>
+ */
+
+#ifndef __PMC_MSP71XX_GPIO_H
+#define __PMC_MSP71XX_GPIO_H
+
+/* Max number of gpio's is 28 on chip plus 3 banks of I2C IO Expanders */
+#define ARCH_NR_GPIOS (28 + (3 * 8))
+
+/* new generic GPIO API - see Documentation/gpio.txt */
+#include <asm-generic/gpio.h>
+
+#define gpio_get_value	__gpio_get_value
+#define gpio_set_value	__gpio_set_value
+#define gpio_cansleep	__gpio_cansleep
+
+/* Setup calls for the gpio and gpio extended */
+extern void msp71xx_init_gpio(void);
+extern void msp71xx_init_gpio_extended(void);
+extern int msp71xx_set_output_drive(unsigned gpio, int value);
+
+/* Custom output drive functionss */
+static inline int gpio_set_output_drive(unsigned gpio, int value)
+{
+	return msp71xx_set_output_drive(gpio, value);
+}
+
+/* IRQ's are not supported for gpio lines */
+static inline int gpio_to_irq(unsigned gpio)
+{
+	return -EINVAL;
+}
+
+static inline int irq_to_gpio(unsigned irq)
+{
+	return -EINVAL;
+}
+
+#endif /* __PMC_MSP71XX_GPIO_H */
diff --git a/arch/mips/include/asm/pmc-sierra/msp71xx/msp_cic_int.h b/arch/mips/include/asm/pmc-sierra/msp71xx/msp_cic_int.h
new file mode 100644
index 0000000..c84bcf9
--- /dev/null
+++ b/arch/mips/include/asm/pmc-sierra/msp71xx/msp_cic_int.h
@@ -0,0 +1,151 @@
+/*
+ * Defines for the MSP interrupt controller.
+ *
+ * Copyright (C) 1999 MIPS Technologies, Inc.  All rights reserved.
+ * Author: Carsten Langgaard, carstenl@mips.com
+ *
+ * ########################################################################
+ *
+ *  This program is free software; you can distribute it and/or modify it
+ *  under the terms of the GNU General Public License (Version 2) as
+ *  published by the Free Software Foundation.
+ *
+ *  This program is distributed in the hope it will be useful, but WITHOUT
+ *  ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ *  FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
+ *  for more details.
+ *
+ *  You should have received a copy of the GNU General Public License along
+ *  with this program; if not, write to the Free Software Foundation, Inc.,
+ *  59 Temple Place - Suite 330, Boston MA 02111-1307, USA.
+ *
+ * ########################################################################
+ */
+
+#ifndef _MSP_CIC_INT_H
+#define _MSP_CIC_INT_H
+
+/*
+ * The PMC-Sierra CIC interrupts are all centrally managed by the
+ * CIC sub-system.
+ * We attempt to keep the interrupt numbers as consistent as possible
+ * across all of the MSP devices, but some differences will creep in ...
+ * The interrupts which are directly forwarded to the MIPS core interrupts
+ * are assigned interrupts in the range 0-7, interrupts cascaded through
+ * the CIC are assigned interrupts 8-39.  The cascade occurs on C_IRQ4
+ * (MSP_INT_CIC).  Currently we don't really distinguish between VPE1
+ * and VPE0 (or thread contexts for that matter).  Will have to fix.
+ * The PER interrupts are assigned interrupts in the range 40-71.
+*/
+
+
+/*
+ * IRQs directly forwarded to the CPU
+ */
+#define MSP_MIPS_INTBASE	0
+#define MSP_INT_SW0		0	/* IRQ for swint0,       C_SW0  */
+#define MSP_INT_SW1		1	/* IRQ for swint1,       C_SW1  */
+#define MSP_INT_MAC0		2	/* IRQ for MAC 0,        C_IRQ0 */
+#define MSP_INT_MAC1		3	/* IRQ for MAC 1,        C_IRQ1 */
+#define MSP_INT_USB		4	/* IRQ for USB,          C_IRQ2 */
+#define MSP_INT_SAR		5	/* IRQ for ADSL2+ SAR,   C_IRQ3 */
+#define MSP_INT_CIC		6	/* IRQ for CIC block,    C_IRQ4 */
+#define MSP_INT_SEC		7	/* IRQ for Sec engine,   C_IRQ5 */
+
+/*
+ * IRQs cascaded on CPU interrupt 4 (CAUSE bit 12, C_IRQ4)
+ * These defines should be tied to the register definitions for the CIC
+ * interrupt routine.  For now, just use hard-coded values.
+ */
+#define MSP_CIC_INTBASE		(MSP_MIPS_INTBASE + 8)
+#define MSP_INT_EXT0		(MSP_CIC_INTBASE + 0)
+					/* External interrupt 0         */
+#define MSP_INT_EXT1		(MSP_CIC_INTBASE + 1)
+					/* External interrupt 1         */
+#define MSP_INT_EXT2		(MSP_CIC_INTBASE + 2)
+					/* External interrupt 2         */
+#define MSP_INT_EXT3		(MSP_CIC_INTBASE + 3)
+					/* External interrupt 3         */
+#define MSP_INT_CPUIF		(MSP_CIC_INTBASE + 4)
+					/* CPU interface interrupt      */
+#define MSP_INT_EXT4		(MSP_CIC_INTBASE + 5)
+					/* External interrupt 4         */
+#define MSP_INT_CIC_USB		(MSP_CIC_INTBASE + 6)
+					/* Cascaded IRQ for USB         */
+#define MSP_INT_MBOX		(MSP_CIC_INTBASE + 7)
+					/* Sec engine mailbox IRQ       */
+#define MSP_INT_EXT5		(MSP_CIC_INTBASE + 8)
+					/* External interrupt 5         */
+#define MSP_INT_TDM		(MSP_CIC_INTBASE + 9)
+					/* TDM interrupt                */
+#define MSP_INT_CIC_MAC0	(MSP_CIC_INTBASE + 10)
+					/* Cascaded IRQ for MAC 0       */
+#define MSP_INT_CIC_MAC1	(MSP_CIC_INTBASE + 11)
+					/* Cascaded IRQ for MAC 1       */
+#define MSP_INT_CIC_SEC		(MSP_CIC_INTBASE + 12)
+					/* Cascaded IRQ for sec engine  */
+#define	MSP_INT_PER		(MSP_CIC_INTBASE + 13)
+					/* Peripheral interrupt         */
+#define	MSP_INT_TIMER0		(MSP_CIC_INTBASE + 14)
+					/* SLP timer 0                  */
+#define	MSP_INT_TIMER1		(MSP_CIC_INTBASE + 15)
+					/* SLP timer 1                  */
+#define	MSP_INT_TIMER2		(MSP_CIC_INTBASE + 16)
+					/* SLP timer 2                  */
+#define	MSP_INT_VPE0_TIMER	(MSP_CIC_INTBASE + 17)
+					/* VPE0 MIPS timer              */
+#define MSP_INT_BLKCP		(MSP_CIC_INTBASE + 18)
+					/* Block Copy                   */
+#define MSP_INT_UART0		(MSP_CIC_INTBASE + 19)
+					/* UART 0                       */
+#define MSP_INT_PCI		(MSP_CIC_INTBASE + 20)
+					/* PCI subsystem                */
+#define MSP_INT_EXT6		(MSP_CIC_INTBASE + 21)
+					/* External interrupt 5         */
+#define MSP_INT_PCI_MSI		(MSP_CIC_INTBASE + 22)
+					/* PCI Message Signal           */
+#define MSP_INT_CIC_SAR		(MSP_CIC_INTBASE + 23)
+					/* Cascaded ADSL2+ SAR IRQ      */
+#define MSP_INT_DSL		(MSP_CIC_INTBASE + 24)
+					/* ADSL2+ IRQ                   */
+#define MSP_INT_CIC_ERR		(MSP_CIC_INTBASE + 25)
+					/* SLP error condition          */
+#define MSP_INT_VPE1_TIMER	(MSP_CIC_INTBASE + 26)
+					/* VPE1 MIPS timer              */
+#define MSP_INT_VPE0_PC		(MSP_CIC_INTBASE + 27)
+					/* VPE0 Performance counter     */
+#define MSP_INT_VPE1_PC		(MSP_CIC_INTBASE + 28)
+					/* VPE1 Performance counter     */
+#define MSP_INT_EXT7		(MSP_CIC_INTBASE + 29)
+					/* External interrupt 5         */
+#define MSP_INT_VPE0_SW		(MSP_CIC_INTBASE + 30)
+					/* VPE0 Software interrupt      */
+#define MSP_INT_VPE1_SW		(MSP_CIC_INTBASE + 31)
+					/* VPE0 Software interrupt      */
+
+/*
+ * IRQs cascaded on CIC PER interrupt (MSP_INT_PER)
+ */
+#define MSP_PER_INTBASE		(MSP_CIC_INTBASE + 32)
+/* Reserved					   0-1                  */
+#define MSP_INT_UART1		(MSP_PER_INTBASE + 2)
+					/* UART 1                       */
+/* Reserved					   3-5                  */
+#define MSP_INT_2WIRE		(MSP_PER_INTBASE + 6)
+					/* 2-wire                       */
+#define MSP_INT_TM0		(MSP_PER_INTBASE + 7)
+					/* Peripheral timer block out 0 */
+#define MSP_INT_TM1		(MSP_PER_INTBASE + 8)
+					/* Peripheral timer block out 1 */
+/* Reserved					   9                    */
+#define MSP_INT_SPRX		(MSP_PER_INTBASE + 10)
+					/* SPI RX complete              */
+#define MSP_INT_SPTX		(MSP_PER_INTBASE + 11)
+					/* SPI TX complete              */
+#define MSP_INT_GPIO		(MSP_PER_INTBASE + 12)
+					/* GPIO                         */
+#define MSP_INT_PER_ERR		(MSP_PER_INTBASE + 13)
+					/* Peripheral error             */
+/* Reserved					   14-31                */
+
+#endif /* !_MSP_CIC_INT_H */
diff --git a/arch/mips/include/asm/pmc-sierra/msp71xx/msp_int.h b/arch/mips/include/asm/pmc-sierra/msp71xx/msp_int.h
new file mode 100644
index 0000000..1d9f054
--- /dev/null
+++ b/arch/mips/include/asm/pmc-sierra/msp71xx/msp_int.h
@@ -0,0 +1,43 @@
+/*
+ * Defines for the MSP interrupt handlers.
+ *
+ * Copyright (C) 2005, PMC-Sierra, Inc.  All rights reserved.
+ * Author: Andrew Hughes, Andrew_Hughes@pmc-sierra.com
+ *
+ * ########################################################################
+ *
+ *  This program is free software; you can distribute it and/or modify it
+ *  under the terms of the GNU General Public License (Version 2) as
+ *  published by the Free Software Foundation.
+ *
+ *  This program is distributed in the hope it will be useful, but WITHOUT
+ *  ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ *  FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
+ *  for more details.
+ *
+ *  You should have received a copy of the GNU General Public License along
+ *  with this program; if not, write to the Free Software Foundation, Inc.,
+ *  59 Temple Place - Suite 330, Boston MA 02111-1307, USA.
+ *
+ * ########################################################################
+ */
+
+#ifndef _MSP_INT_H
+#define _MSP_INT_H
+
+/*
+ * The PMC-Sierra MSP product line has at least two different interrupt
+ * controllers, the SLP register based scheme and the CIC interrupt
+ * controller block mechanism.  This file distinguishes between them
+ * so that devices see a uniform interface.
+ */
+
+#if defined(CONFIG_IRQ_MSP_SLP)
+	#include "msp_slp_int.h"
+#elif defined(CONFIG_IRQ_MSP_CIC)
+	#include "msp_cic_int.h"
+#else
+	#error "What sort of interrupt controller does *your* MSP have?"
+#endif
+
+#endif /* !_MSP_INT_H */
diff --git a/arch/mips/include/asm/pmc-sierra/msp71xx/msp_pci.h b/arch/mips/include/asm/pmc-sierra/msp71xx/msp_pci.h
new file mode 100644
index 0000000..4156069
--- /dev/null
+++ b/arch/mips/include/asm/pmc-sierra/msp71xx/msp_pci.h
@@ -0,0 +1,205 @@
+/*
+ * Copyright (c) 2000-2006 PMC-Sierra INC.
+ *
+ *     This program is free software; you can redistribute it
+ *     and/or modify it under the terms of the GNU General
+ *     Public License as published by the Free Software
+ *     Foundation; either version 2 of the License, or (at your
+ *     option) any later version.
+ *
+ *     This program is distributed in the hope that it will be
+ *     useful, but WITHOUT ANY WARRANTY; without even the implied
+ *     warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR
+ *     PURPOSE.  See the GNU General Public License for more
+ *     details.
+ *
+ *     You should have received a copy of the GNU General Public
+ *     License along with this program; if not, write to the Free
+ *     Software Foundation, Inc., 675 Mass Ave, Cambridge, MA
+ *     02139, USA.
+ *
+ * PMC-SIERRA INC. DISCLAIMS ANY LIABILITY OF ANY KIND
+ * FOR ANY DAMAGES WHATSOEVER RESULTING FROM THE USE OF THIS
+ * SOFTWARE.
+ */
+
+#ifndef _MSP_PCI_H_
+#define _MSP_PCI_H_
+
+#define MSP_HAS_PCI(ID)	(((u32)(ID) <= 0x4236) && ((u32)(ID) >= 0x4220))
+
+/*
+ * It is convenient to program the OATRAN register so that
+ * Athena virtual address space and PCI address space are
+ * the same. This is not a requirement, just a convenience.
+ *
+ * The only hard restrictions on the value of OATRAN is that
+ * OATRAN must not be programmed to allow translated memory
+ * addresses to fall within the lowest 512MB of
+ * PCI address space. This region is hardcoded
+ * for use as Athena PCI Host Controller target
+ * access memory space to the Athena's SDRAM.
+ *
+ * Note that OATRAN applies only to memory accesses, not
+ * to I/O accesses.
+ *
+ * To program OATRAN to make Athena virtual address space
+ * and PCI address space have the same values, OATRAN
+ * is to be programmed to 0xB8000000. The top seven
+ * bits of the value mimic the seven bits clipped off
+ * by the PCI Host controller.
+ *
+ * With OATRAN at the said value, when the CPU does
+ * an access to its virtual address at, say 0xB900_5000,
+ * the address appearing on the PCI bus will be
+ * 0xB900_5000.
+ *    - Michael Penner
+ */
+#define MSP_PCI_OATRAN		0xB8000000UL
+
+#define MSP_PCI_SPACE_BASE	(MSP_PCI_OATRAN + 0x1002000UL)
+#define MSP_PCI_SPACE_SIZE	(0x3000000UL - 0x2000)
+#define MSP_PCI_SPACE_END \
+		(MSP_PCI_SPACE_BASE + MSP_PCI_SPACE_SIZE - 1)
+#define MSP_PCI_IOSPACE_BASE	(MSP_PCI_OATRAN + 0x1001000UL)
+#define MSP_PCI_IOSPACE_SIZE	0x1000
+#define MSP_PCI_IOSPACE_END  \
+		(MSP_PCI_IOSPACE_BASE + MSP_PCI_IOSPACE_SIZE - 1)
+
+/* IRQ for PCI status interrupts */
+#define PCI_STAT_IRQ	20
+
+#define QFLUSH_REG_1	0xB7F40000
+
+typedef volatile unsigned int pcireg;
+typedef void * volatile ppcireg;
+
+struct pci_block_copy
+{
+    pcireg   unused1; /* +0x00 */
+    pcireg   unused2; /* +0x04 */
+    ppcireg  unused3; /* +0x08 */
+    ppcireg  unused4; /* +0x0C */
+    pcireg   unused5; /* +0x10 */
+    pcireg   unused6; /* +0x14 */
+    pcireg   unused7; /* +0x18 */
+    ppcireg  unused8; /* +0x1C */
+    ppcireg  unused9; /* +0x20 */
+    pcireg   unusedA; /* +0x24 */
+    ppcireg  unusedB; /* +0x28 */
+    ppcireg  unusedC; /* +0x2C */
+};
+
+enum
+{
+    config_device_vendor,  /* 0 */
+    config_status_command, /* 1 */
+    config_class_revision, /* 2 */
+    config_BIST_header_latency_cache, /* 3 */
+    config_BAR0,           /* 4 */
+    config_BAR1,           /* 5 */
+    config_BAR2,           /* 6 */
+    config_not_used7,      /* 7 */
+    config_not_used8,      /* 8 */
+    config_not_used9,      /* 9 */
+    config_CIS,            /* 10 */
+    config_subsystem,      /* 11 */
+    config_not_used12,     /* 12 */
+    config_capabilities,   /* 13 */
+    config_not_used14,     /* 14 */
+    config_lat_grant_irq,  /* 15 */
+    config_message_control,/* 16 */
+    config_message_addr,   /* 17 */
+    config_message_data,   /* 18 */
+    config_VPD_addr,       /* 19 */
+    config_VPD_data,       /* 20 */
+    config_maxregs         /* 21 - number of registers */
+};
+
+struct msp_pci_regs
+{
+    pcireg hop_unused_00; /* +0x00 */
+    pcireg hop_unused_04; /* +0x04 */
+    pcireg hop_unused_08; /* +0x08 */
+    pcireg hop_unused_0C; /* +0x0C */
+    pcireg hop_unused_10; /* +0x10 */
+    pcireg hop_unused_14; /* +0x14 */
+    pcireg hop_unused_18; /* +0x18 */
+    pcireg hop_unused_1C; /* +0x1C */
+    pcireg hop_unused_20; /* +0x20 */
+    pcireg hop_unused_24; /* +0x24 */
+    pcireg hop_unused_28; /* +0x28 */
+    pcireg hop_unused_2C; /* +0x2C */
+    pcireg hop_unused_30; /* +0x30 */
+    pcireg hop_unused_34; /* +0x34 */
+    pcireg if_control;    /* +0x38 */
+    pcireg oatran;        /* +0x3C */
+    pcireg reset_ctl;     /* +0x40 */
+    pcireg config_addr;   /* +0x44 */
+    pcireg hop_unused_48; /* +0x48 */
+    pcireg msg_signaled_int_status; /* +0x4C */
+    pcireg msg_signaled_int_mask;   /* +0x50 */
+    pcireg if_status;     /* +0x54 */
+    pcireg if_mask;       /* +0x58 */
+    pcireg hop_unused_5C; /* +0x5C */
+    pcireg hop_unused_60; /* +0x60 */
+    pcireg hop_unused_64; /* +0x64 */
+    pcireg hop_unused_68; /* +0x68 */
+    pcireg hop_unused_6C; /* +0x6C */
+    pcireg hop_unused_70; /* +0x70 */
+
+    struct pci_block_copy pci_bc[2] __attribute__((aligned(64)));
+
+    pcireg error_hdr1; /* +0xE0 */
+    pcireg error_hdr2; /* +0xE4 */
+
+    pcireg config[config_maxregs] __attribute__((aligned(256)));
+
+};
+
+#define BPCI_CFGADDR_BUSNUM_SHF 16
+#define BPCI_CFGADDR_FUNCTNUM_SHF 8
+#define BPCI_CFGADDR_REGNUM_SHF 2
+#define BPCI_CFGADDR_ENABLE (1<<31)
+
+#define BPCI_IFCONTROL_RTO (1<<20) /* Retry timeout */
+#define BPCI_IFCONTROL_HCE (1<<16) /* Host configuration enable */
+#define BPCI_IFCONTROL_CTO_SHF 12  /* Shift count for CTO bits */
+#define BPCI_IFCONTROL_SE  (1<<5)  /* Enable exceptions on errors */
+#define BPCI_IFCONTROL_BIST (1<<4) /* Use BIST in per. mode */
+#define BPCI_IFCONTROL_CAP (1<<3)  /* Enable capabilities */
+#define BPCI_IFCONTROL_MMC_SHF 0   /* Shift count for MMC bits */
+
+#define BPCI_IFSTATUS_MGT  (1<<8)  /* Master Grant timeout */
+#define BPCI_IFSTATUS_MTT  (1<<9)  /* Master TRDY timeout */
+#define BPCI_IFSTATUS_MRT  (1<<10) /* Master retry timeout */
+#define BPCI_IFSTATUS_BC0F (1<<13) /* Block copy 0 fault */
+#define BPCI_IFSTATUS_BC1F (1<<14) /* Block copy 1 fault */
+#define BPCI_IFSTATUS_PCIU (1<<15) /* PCI unable to respond */
+#define BPCI_IFSTATUS_BSIZ (1<<16) /* PCI access with illegal size */
+#define BPCI_IFSTATUS_BADD (1<<17) /* PCI access with illegal addr */
+#define BPCI_IFSTATUS_RTO  (1<<18) /* Retry time out */
+#define BPCI_IFSTATUS_SER  (1<<19) /* System error */
+#define BPCI_IFSTATUS_PER  (1<<20) /* Parity error */
+#define BPCI_IFSTATUS_LCA  (1<<21) /* Local CPU abort */
+#define BPCI_IFSTATUS_MEM  (1<<22) /* Memory prot. violation */
+#define BPCI_IFSTATUS_ARB  (1<<23) /* Arbiter timed out */
+#define BPCI_IFSTATUS_STA  (1<<27) /* Signaled target abort */
+#define BPCI_IFSTATUS_TA   (1<<28) /* Target abort */
+#define BPCI_IFSTATUS_MA   (1<<29) /* Master abort */
+#define BPCI_IFSTATUS_PEI  (1<<30) /* Parity error as initiator */
+#define BPCI_IFSTATUS_PET  (1<<31) /* Parity error as target */
+
+#define BPCI_RESETCTL_PR (1<<0)    /* True if reset asserted */
+#define BPCI_RESETCTL_RT (1<<4)    /* Release time */
+#define BPCI_RESETCTL_CT (1<<8)    /* Config time */
+#define BPCI_RESETCTL_PE (1<<12)   /* PCI enabled */
+#define BPCI_RESETCTL_HM (1<<13)   /* PCI host mode */
+#define BPCI_RESETCTL_RI (1<<14)   /* PCI reset in */
+
+extern struct msp_pci_regs msp_pci_regs
+			__attribute__((section(".register")));
+extern unsigned long msp_pci_config_space
+			__attribute__((section(".register")));
+
+#endif /* !_MSP_PCI_H_ */
diff --git a/arch/mips/include/asm/pmc-sierra/msp71xx/msp_prom.h b/arch/mips/include/asm/pmc-sierra/msp71xx/msp_prom.h
new file mode 100644
index 0000000..14ca7dc
--- /dev/null
+++ b/arch/mips/include/asm/pmc-sierra/msp71xx/msp_prom.h
@@ -0,0 +1,176 @@
+/*
+ * MIPS boards bootprom interface for the Linux kernel.
+ *
+ * Copyright (C) 2000 MIPS Technologies, Inc.  All rights reserved.
+ * Author: Carsten Langgaard, carstenl@mips.com
+ *
+ * ########################################################################
+ *
+ *  This program is free software; you can distribute it and/or modify it
+ *  under the terms of the GNU General Public License (Version 2) as
+ *  published by the Free Software Foundation.
+ *
+ *  This program is distributed in the hope it will be useful, but WITHOUT
+ *  ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ *  FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
+ *  for more details.
+ *
+ *  You should have received a copy of the GNU General Public License along
+ *  with this program; if not, write to the Free Software Foundation, Inc.,
+ *  59 Temple Place - Suite 330, Boston MA 02111-1307, USA.
+ *
+ * ########################################################################
+ */
+
+#ifndef _ASM_MSP_PROM_H
+#define _ASM_MSP_PROM_H
+
+#include <linux/types.h>
+
+#define DEVICEID			"deviceid"
+#define FEATURES			"features"
+#define PROM_ENV			"prom_env"
+#define PROM_ENV_FILE			"/proc/"PROM_ENV
+#define PROM_ENV_SIZE			256
+
+#define CPU_DEVID_FAMILY		0x0000ff00
+#define CPU_DEVID_REVISION		0x000000ff
+
+#define FPGA_IS_POLO(revision) \
+		(((revision >= 0xb0) && (revision < 0xd0)))
+#define FPGA_IS_5000(revision) \
+		((revision >= 0x80) && (revision <= 0x90))
+#define	FPGA_IS_ZEUS(revision)		((revision < 0x7f))
+#define FPGA_IS_DUET(revision) \
+		(((revision >= 0xa0) && (revision < 0xb0)))
+#define FPGA_IS_MSP4200(revision)	((revision >= 0xd0))
+#define FPGA_IS_MSP7100(revision)	((revision >= 0xd0))
+
+#define MACHINE_TYPE_POLO		"POLO"
+#define MACHINE_TYPE_DUET		"DUET"
+#define	MACHINE_TYPE_ZEUS		"ZEUS"
+#define MACHINE_TYPE_MSP2000REVB	"MSP2000REVB"
+#define MACHINE_TYPE_MSP5000		"MSP5000"
+#define MACHINE_TYPE_MSP4200		"MSP4200"
+#define MACHINE_TYPE_MSP7120		"MSP7120"
+#define MACHINE_TYPE_MSP7130		"MSP7130"
+#define MACHINE_TYPE_OTHER		"OTHER"
+
+#define MACHINE_TYPE_POLO_FPGA		"POLO-FPGA"
+#define MACHINE_TYPE_DUET_FPGA		"DUET-FPGA"
+#define	MACHINE_TYPE_ZEUS_FPGA		"ZEUS_FPGA"
+#define MACHINE_TYPE_MSP2000REVB_FPGA	"MSP2000REVB-FPGA"
+#define MACHINE_TYPE_MSP5000_FPGA	"MSP5000-FPGA"
+#define MACHINE_TYPE_MSP4200_FPGA	"MSP4200-FPGA"
+#define MACHINE_TYPE_MSP7100_FPGA	"MSP7100-FPGA"
+#define MACHINE_TYPE_OTHER_FPGA		"OTHER-FPGA"
+
+/* Device Family definitions */
+#define FAMILY_FPGA			0x0000
+#define FAMILY_ZEUS			0x1000
+#define FAMILY_POLO			0x2000
+#define FAMILY_DUET			0x4000
+#define FAMILY_TRIAD			0x5000
+#define FAMILY_MSP4200			0x4200
+#define FAMILY_MSP4200_FPGA		0x4f00
+#define FAMILY_MSP7100			0x7100
+#define FAMILY_MSP7100_FPGA		0x7f00
+
+/* Device Type definitions */
+#define TYPE_MSP7120			0x7120
+#define TYPE_MSP7130			0x7130
+
+#define ENET_KEY		'E'
+#define ENETTXD_KEY		'e'
+#define PCI_KEY			'P'
+#define PCIMUX_KEY		'p'
+#define SEC_KEY			'S'
+#define SPAD_KEY		'D'
+#define TDM_KEY			'T'
+#define ZSP_KEY			'Z'
+
+#define FEATURE_NOEXIST		'-'
+#define FEATURE_EXIST		'+'
+
+#define ENET_MII		'M'
+#define ENET_RMII		'R'
+
+#define	ENETTXD_FALLING		'F'
+#define ENETTXD_RISING		'R'
+
+#define PCI_HOST		'H'
+#define PCI_PERIPHERAL		'P'
+
+#define PCIMUX_FULL		'F'
+#define PCIMUX_SINGLE		'S'
+
+#define SEC_DUET		'D'
+#define SEC_POLO		'P'
+#define SEC_SLOW		'S'
+#define SEC_TRIAD		'T'
+
+#define SPAD_POLO		'P'
+
+#define TDM_DUET		'D'	/* DUET TDMs might exist */
+#define TDM_POLO		'P'	/* POLO TDMs might exist */
+#define TDM_TRIAD		'T'	/* TRIAD TDMs might exist */
+
+#define ZSP_DUET		'D'	/* one DUET zsp engine */
+#define ZSP_TRIAD		'T'	/* two TRIAD zsp engines */
+
+extern char *prom_getcmdline(void);
+extern char *prom_getenv(char *name);
+extern void prom_init_cmdline(void);
+extern void prom_meminit(void);
+extern void prom_fixup_mem_map(unsigned long start_mem,
+			       unsigned long end_mem);
+
+#ifdef CONFIG_MTD_PMC_MSP_RAMROOT
+extern bool get_ramroot(void **start, unsigned long *size);
+#endif
+
+extern int get_ethernet_addr(char *ethaddr_name, char *ethernet_addr);
+extern unsigned long get_deviceid(void);
+extern char identify_enet(unsigned long interface_num);
+extern char identify_enetTxD(unsigned long interface_num);
+extern char identify_pci(void);
+extern char identify_sec(void);
+extern char identify_spad(void);
+extern char identify_sec(void);
+extern char identify_tdm(void);
+extern char identify_zsp(void);
+extern unsigned long identify_family(void);
+extern unsigned long identify_revision(void);
+
+/*
+ * The following macro calls prom_printf and puts the format string
+ * into an init section so it can be reclaimed.
+ */
+#define ppfinit(f, x...) \
+	do { \
+		static char _f[] __initdata = KERN_INFO f; \
+		printk(_f, ## x); \
+	} while (0)
+
+/* Memory descriptor management. */
+#define PROM_MAX_PMEMBLOCKS    7	/* 6 used */
+
+enum yamon_memtypes {
+	yamon_dontuse,
+	yamon_prom,
+	yamon_free,
+};
+
+struct prom_pmemblock {
+	unsigned long base; /* Within KSEG0. */
+	unsigned int size;  /* In bytes. */
+	unsigned int type;  /* free or prom memory */
+};
+
+extern int prom_argc;
+extern char **prom_argv;
+extern char **prom_envp;
+extern int *prom_vec;
+extern struct prom_pmemblock *prom_getmdesc(void);
+
+#endif /* !_ASM_MSP_PROM_H */
diff --git a/arch/mips/include/asm/pmc-sierra/msp71xx/msp_regops.h b/arch/mips/include/asm/pmc-sierra/msp71xx/msp_regops.h
new file mode 100644
index 0000000..60a5a38
--- /dev/null
+++ b/arch/mips/include/asm/pmc-sierra/msp71xx/msp_regops.h
@@ -0,0 +1,236 @@
+/*
+ * SMP/VPE-safe functions to access "registers" (see note).
+ *
+ * NOTES:
+* - These macros use ll/sc instructions, so it is your responsibility to
+ * ensure these are available on your platform before including this file.
+ * - The MIPS32 spec states that ll/sc results are undefined for uncached
+ * accesses. This means they can't be used on HW registers accessed
+ * through kseg1. Code which requires these macros for this purpose must
+ * front-end the registers with cached memory "registers" and have a single
+ * thread update the actual HW registers.
+ * - A maximum of 2k of code can be inserted between ll and sc. Every
+ * memory accesses between the instructions will increase the chance of
+ * sc failing and having to loop.
+ * - When using custom_read_reg32/custom_write_reg32 only perform the
+ * necessary logical operations on the register value in between these
+ * two calls. All other logic should be performed before the first call.
+  * - There is a bug on the R10000 chips which has a workaround. If you
+ * are affected by this bug, make sure to define the symbol 'R10000_LLSC_WAR'
+ * to be non-zero.  If you are using this header from within linux, you may
+ * include <asm/war.h> before including this file to have this defined
+ * appropriately for you.
+ *
+ * Copyright 2005-2007 PMC-Sierra, Inc.
+ *
+ *  This program is free software; you can redistribute  it and/or modify it
+ *  under  the terms of  the GNU General  Public License as published by the
+ *  Free Software Foundation;  either version 2 of the  License, or (at your
+ *  option) any later version.
+ *
+ *  THIS  SOFTWARE  IS PROVIDED   ``AS  IS'' AND   ANY  EXPRESS OR IMPLIED
+ *  WARRANTIES,   INCLUDING, BUT NOT  LIMITED  TO, THE IMPLIED WARRANTIES OF
+ *  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN NO
+ *  EVENT  SHALL   THE AUTHOR  BE    LIABLE FOR ANY   DIRECT, INDIRECT,
+ *  INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ *  LIMITED   TO, PROCUREMENT OF  SUBSTITUTE GOODS  OR SERVICES; LOSS OF USE,
+ *  DATA,  OR PROFITS; OR  BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+ *  THEORY OF LIABILITY, WHETHER IN  CONTRACT, STRICT LIABILITY, OR TORT
+ *  (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
+ *  THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ *  You should have received a copy of the  GNU General Public License along
+ *  with this program; if not, write  to the Free Software Foundation, Inc., 675
+ *  Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#ifndef __ASM_REGOPS_H__
+#define __ASM_REGOPS_H__
+
+#include <linux/types.h>
+
+#include <asm/war.h>
+
+#ifndef R10000_LLSC_WAR
+#define R10000_LLSC_WAR 0
+#endif
+
+#if R10000_LLSC_WAR == 1
+#define __beqz	"beqzl	"
+#else
+#define __beqz	"beqz	"
+#endif
+
+#ifndef _LINUX_TYPES_H
+typedef unsigned int u32;
+#endif
+
+/*
+ * Sets all the masked bits to the corresponding value bits
+ */
+static inline void set_value_reg32(volatile u32 *const addr,
+					u32 const mask,
+					u32 const value)
+{
+	u32 temp;
+
+	__asm__ __volatile__(
+	"	.set	push				\n"
+	"	.set	mips3				\n"
+	"1:	ll	%0, %1	# set_value_reg32	\n"
+	"	and	%0, %2				\n"
+	"	or	%0, %3				\n"
+	"	sc	%0, %1				\n"
+	"	"__beqz"%0, 1b				\n"
+	"	nop					\n"
+	"	.set	pop				\n"
+	: "=&r" (temp), "=m" (*addr)
+	: "ir" (~mask), "ir" (value), "m" (*addr));
+}
+
+/*
+ * Sets all the masked bits to '1'
+ */
+static inline void set_reg32(volatile u32 *const addr,
+				u32 const mask)
+{
+	u32 temp;
+
+	__asm__ __volatile__(
+	"	.set	push				\n"
+	"	.set	mips3				\n"
+	"1:	ll	%0, %1		# set_reg32	\n"
+	"	or	%0, %2				\n"
+	"	sc	%0, %1				\n"
+	"	"__beqz"%0, 1b				\n"
+	"	nop					\n"
+	"	.set	pop				\n"
+	: "=&r" (temp), "=m" (*addr)
+	: "ir" (mask), "m" (*addr));
+}
+
+/*
+ * Sets all the masked bits to '0'
+ */
+static inline void clear_reg32(volatile u32 *const addr,
+				u32 const mask)
+{
+	u32 temp;
+
+	__asm__ __volatile__(
+	"	.set	push				\n"
+	"	.set	mips3				\n"
+	"1:	ll	%0, %1		# clear_reg32	\n"
+	"	and	%0, %2				\n"
+	"	sc	%0, %1				\n"
+	"	"__beqz"%0, 1b				\n"
+	"	nop					\n"
+	"	.set	pop				\n"
+	: "=&r" (temp), "=m" (*addr)
+	: "ir" (~mask), "m" (*addr));
+}
+
+/*
+ * Toggles all masked bits from '0' to '1' and '1' to '0'
+ */
+static inline void toggle_reg32(volatile u32 *const addr,
+				u32 const mask)
+{
+	u32 temp;
+
+	__asm__ __volatile__(
+	"	.set	push				\n"
+	"	.set	mips3				\n"
+	"1:	ll	%0, %1		# toggle_reg32	\n"
+	"	xor	%0, %2				\n"
+	"	sc	%0, %1				\n"
+	"	"__beqz"%0, 1b				\n"
+	"	nop					\n"
+	"	.set	pop				\n"
+	: "=&r" (temp), "=m" (*addr)
+	: "ir" (mask), "m" (*addr));
+}
+
+/*
+ * Read all masked bits others are returned as '0'
+ */
+static inline u32 read_reg32(volatile u32 *const addr,
+				u32 const mask)
+{
+	u32 temp;
+
+	__asm__ __volatile__(
+	"	.set	push				\n"
+	"	.set	noreorder			\n"
+	"	lw	%0, %1		# read		\n"
+	"	and	%0, %2		# mask		\n"
+	"	.set	pop				\n"
+	: "=&r" (temp)
+	: "m" (*addr), "ir" (mask));
+
+	return temp;
+}
+
+/*
+ * blocking_read_reg32 - Read address with blocking load
+ *
+ * Uncached writes need to be read back to ensure they reach RAM.
+ * The returned value must be 'used' to prevent from becoming a
+ * non-blocking load.
+ */
+static inline u32 blocking_read_reg32(volatile u32 *const addr)
+{
+	u32 temp;
+
+	__asm__ __volatile__(
+	"	.set	push				\n"
+	"	.set	noreorder			\n"
+	"	lw	%0, %1		# read		\n"
+	"	move	%0, %0		# block		\n"
+	"	.set	pop				\n"
+	: "=&r" (temp)
+	: "m" (*addr));
+
+	return temp;
+}
+
+/*
+ * For special strange cases only:
+ *
+ * If you need custom processing within a ll/sc loop, use the following macros
+ * VERY CAREFULLY:
+ *
+ *   u32 tmp;				<-- Define a variable to hold the data
+ *
+ *   custom_read_reg32(address, tmp);	<-- Reads the address and put the value
+ *						in the 'tmp' variable given
+ *
+ *	From here on out, you are (basicly) atomic, so don't do anything too
+ *	fancy!
+ *	Also, this code may loop if the end of this block fails to write
+ *	everything back safely due do the other CPU, so do NOT do anything
+ *	with side-effects!
+ *
+ *   custom_write_reg32(address, tmp);	<-- Writes back 'tmp' safely.
+ */
+#define custom_read_reg32(address, tmp)				\
+	__asm__ __volatile__(					\
+	"	.set	push				\n"	\
+	"	.set	mips3				\n"	\
+	"1:	ll	%0, %1	#custom_read_reg32	\n"	\
+	"	.set	pop				\n"	\
+	: "=r" (tmp), "=m" (*address)				\
+	: "m" (*address))
+
+#define custom_write_reg32(address, tmp)			\
+	__asm__ __volatile__(					\
+	"	.set	push				\n"	\
+	"	.set	mips3				\n"	\
+	"	sc	%0, %1	#custom_write_reg32	\n"	\
+	"	"__beqz"%0, 1b				\n"	\
+	"	nop					\n"	\
+	"	.set	pop				\n"	\
+	: "=&r" (tmp), "=m" (*address)				\
+	: "0" (tmp), "m" (*address))
+
+#endif  /* __ASM_REGOPS_H__ */
diff --git a/arch/mips/include/asm/pmc-sierra/msp71xx/msp_regs.h b/arch/mips/include/asm/pmc-sierra/msp71xx/msp_regs.h
new file mode 100644
index 0000000..603eb73
--- /dev/null
+++ b/arch/mips/include/asm/pmc-sierra/msp71xx/msp_regs.h
@@ -0,0 +1,663 @@
+/*
+ * Defines for the address space, registers and register configuration
+ * (bit masks, access macros etc) for the PMC-Sierra line of MSP products.
+ * This file contains addess maps for all the devices in the line of
+ * products but only has register definitions and configuration masks for
+ * registers which aren't definitely associated with any device.  Things
+ * like clock settings, reset access, the ELB etc.  Individual device
+ * drivers will reference the appropriate XXX_BASE value defined here
+ * and have individual registers offset from that.
+ *
+ * Copyright (C) 2005-2007 PMC-Sierra, Inc.  All rights reserved.
+ * Author: Andrew Hughes, Andrew_Hughes@pmc-sierra.com
+ *
+ * ########################################################################
+ *
+ *  This program is free software; you can distribute it and/or modify it
+ *  under the terms of the GNU General Public License (Version 2) as
+ *  published by the Free Software Foundation.
+ *
+ *  This program is distributed in the hope it will be useful, but WITHOUT
+ *  ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ *  FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
+ *  for more details.
+ *
+ *  You should have received a copy of the GNU General Public License along
+ *  with this program; if not, write to the Free Software Foundation, Inc.,
+ *  59 Temple Place - Suite 330, Boston MA 02111-1307, USA.
+ *
+ * ########################################################################
+ */
+
+#include <asm/addrspace.h>
+#include <linux/types.h>
+
+#ifndef _ASM_MSP_REGS_H
+#define _ASM_MSP_REGS_H
+
+/*
+ ########################################################################
+ #  Address space and device base definitions                           #
+ ########################################################################
+ */
+
+/*
+ ***************************************************************************
+ * System Logic and Peripherals (ELB, UART0, etc) device address space     *
+ ***************************************************************************
+ */
+#define MSP_SLP_BASE		0x1c000000
+					/* System Logic and Peripherals */
+#define MSP_RST_BASE		(MSP_SLP_BASE + 0x10)
+					/* System reset register base	*/
+#define MSP_RST_SIZE		0x0C	/* System reset register space	*/
+
+#define MSP_WTIMER_BASE		(MSP_SLP_BASE + 0x04C)
+					/* watchdog timer base          */
+#define MSP_ITIMER_BASE		(MSP_SLP_BASE + 0x054)
+					/* internal timer base          */
+#define MSP_UART0_BASE		(MSP_SLP_BASE + 0x100)
+					/* UART0 controller base        */
+#define MSP_BCPY_CTRL_BASE	(MSP_SLP_BASE + 0x120)
+					/* Block Copy controller base   */
+#define MSP_BCPY_DESC_BASE	(MSP_SLP_BASE + 0x160)
+					/* Block Copy descriptor base   */
+
+/*
+ ***************************************************************************
+ * PCI address space                                                       *
+ ***************************************************************************
+ */
+#define MSP_PCI_BASE		0x19000000
+
+/*
+ ***************************************************************************
+ * MSbus device address space                                              *
+ ***************************************************************************
+ */
+#define MSP_MSB_BASE		0x18000000
+					/* MSbus address start          */
+#define MSP_PER_BASE		(MSP_MSB_BASE + 0x400000)
+					/* Peripheral device registers  */
+#define MSP_MAC0_BASE		(MSP_MSB_BASE + 0x600000)
+					/* MAC A device registers       */
+#define MSP_MAC1_BASE		(MSP_MSB_BASE + 0x700000)
+					/* MAC B device registers       */
+#define MSP_MAC_SIZE		0xE0	/* MAC register space		*/
+
+#define MSP_SEC_BASE		(MSP_MSB_BASE + 0x800000)
+					/* Security Engine registers    */
+#define MSP_MAC2_BASE		(MSP_MSB_BASE + 0x900000)
+					/* MAC C device registers       */
+#define MSP_ADSL2_BASE		(MSP_MSB_BASE + 0xA80000)
+					/* ADSL2 device registers       */
+#define MSP_USB_BASE		(MSP_MSB_BASE + 0xB40000)
+					/* USB device registers         */
+#define MSP_USB_BASE_START	(MSP_MSB_BASE + 0xB40100)
+					/* USB device registers         */
+#define MSP_USB_BASE_END	(MSP_MSB_BASE + 0xB401FF)
+					/* USB device registers         */
+#define MSP_CPUIF_BASE		(MSP_MSB_BASE + 0xC00000)
+					/* CPU interface registers      */
+
+/* Devices within the MSbus peripheral block */
+#define MSP_UART1_BASE		(MSP_PER_BASE + 0x030)
+					/* UART1 controller base        */
+#define MSP_SPI_BASE		(MSP_PER_BASE + 0x058)
+					/* SPI/MPI control registers    */
+#define MSP_TWI_BASE		(MSP_PER_BASE + 0x090)
+					/* Two-wire control registers   */
+#define MSP_PTIMER_BASE		(MSP_PER_BASE + 0x0F0)
+					/* Programmable timer control   */
+
+/*
+ ***************************************************************************
+ * Physical Memory configuration address space                             *
+ ***************************************************************************
+ */
+#define MSP_MEM_CFG_BASE	0x17f00000
+
+#define MSP_MEM_INDIRECT_CTL_10	0x10
+
+/*
+ * Notes:
+ *  1) The SPI registers are split into two blocks, one offset from the
+ *     MSP_SPI_BASE by 0x00 and the other offset from the MSP_SPI_BASE by
+ *     0x68.  The SPI driver definitions for the register must be aware
+ *     of this.
+ *  2) The block copy engine register are divided into two regions, one
+ *     for the control/configuration of the engine proper and one for the
+ *     values of the descriptors used in the copy process.  These have
+ *     different base defines (CTRL_BASE vs DESC_BASE)
+ *  3) These constants are for physical addresses which means that they
+ *     work correctly with "ioremap" and friends.  This means that device
+ *     drivers will need to remap these addresses using ioremap and perhaps
+ *     the readw/writew macros.  Or they could use the regptr() macro
+ *     defined below, but the readw/writew calls are the correct thing.
+ *  4) The UARTs have an additional status register offset from the base
+ *     address.  This register isn't used in the standard 8250 driver but
+ *     may be used in other software.  Consult the hardware datasheet for
+ *     offset details.
+ *  5) For some unknown reason the security engine (MSP_SEC_BASE) registers
+ *     start at an offset of 0x84 from the base address but the block of
+ *     registers before this is reserved for the security engine.  The
+ *     driver will have to be aware of this but it makes the register
+ *     definitions line up better with the documentation.
+ */
+
+/*
+ ########################################################################
+ #  System register definitions.  Not associated with a specific device #
+ ########################################################################
+ */
+
+/*
+ * This macro maps the physical register number into uncached space
+ * and (for C code) casts it into a u32 pointer so it can be dereferenced
+ * Normally these would be accessed with ioremap and readX/writeX, but
+ * these are convenient for a lot of internal kernel code.
+ */
+#ifdef __ASSEMBLER__
+	#define regptr(addr) (KSEG1ADDR(addr))
+#else
+	#define regptr(addr) ((volatile u32 *const)(KSEG1ADDR(addr)))
+#endif
+
+/*
+ ***************************************************************************
+ * System Logic and Peripherals (RESET, ELB, etc) registers                *
+ ***************************************************************************
+ */
+
+/* System Control register definitions */
+#define	DEV_ID_REG	regptr(MSP_SLP_BASE + 0x00)
+					/* Device-ID                 RO */
+#define	FWR_ID_REG	regptr(MSP_SLP_BASE + 0x04)
+					/* Firmware-ID Register      RW */
+#define	SYS_ID_REG0	regptr(MSP_SLP_BASE + 0x08)
+					/* System-ID Register-0      RW */
+#define	SYS_ID_REG1	regptr(MSP_SLP_BASE + 0x0C)
+					/* System-ID Register-1      RW */
+
+/* System Reset register definitions */
+#define	RST_STS_REG	regptr(MSP_SLP_BASE + 0x10)
+					/* System Reset Status       RO */
+#define	RST_SET_REG	regptr(MSP_SLP_BASE + 0x14)
+					/* System Set Reset          WO */
+#define	RST_CLR_REG	regptr(MSP_SLP_BASE + 0x18)
+					/* System Clear Reset        WO */
+
+/* System Clock Registers */
+#define PCI_SLP_REG	regptr(MSP_SLP_BASE + 0x1C)
+					/* PCI clock generator       RW */
+#define URT_SLP_REG	regptr(MSP_SLP_BASE + 0x20)
+					/* UART clock generator      RW */
+/* reserved		      (MSP_SLP_BASE + 0x24)                     */
+/* reserved		      (MSP_SLP_BASE + 0x28)                     */
+#define PLL1_SLP_REG	regptr(MSP_SLP_BASE + 0x2C)
+					/* PLL1 clock generator      RW */
+#define PLL0_SLP_REG	regptr(MSP_SLP_BASE + 0x30)
+					/* PLL0 clock generator      RW */
+#define MIPS_SLP_REG	regptr(MSP_SLP_BASE + 0x34)
+					/* MIPS clock generator      RW */
+#define	VE_SLP_REG	regptr(MSP_SLP_BASE + 0x38)
+					/* Voice Eng clock generator RW */
+/* reserved		      (MSP_SLP_BASE + 0x3C)                     */
+#define MSB_SLP_REG	regptr(MSP_SLP_BASE + 0x40)
+					/* MS-Bus clock generator    RW */
+#define SMAC_SLP_REG	regptr(MSP_SLP_BASE + 0x44)
+					/* Sec & MAC clock generator RW */
+#define PERF_SLP_REG	regptr(MSP_SLP_BASE + 0x48)
+					/* Per & TDM clock generator RW */
+
+/* Interrupt Controller Registers */
+#define SLP_INT_STS_REG regptr(MSP_SLP_BASE + 0x70)
+					/* Interrupt status register RW */
+#define SLP_INT_MSK_REG regptr(MSP_SLP_BASE + 0x74)
+					/* Interrupt enable/mask     RW */
+#define SE_MBOX_REG	regptr(MSP_SLP_BASE + 0x78)
+					/* Security Engine mailbox   RW */
+#define VE_MBOX_REG	regptr(MSP_SLP_BASE + 0x7C)
+					/* Voice Engine mailbox      RW */
+
+/* ELB Controller Registers */
+#define CS0_CNFG_REG	regptr(MSP_SLP_BASE + 0x80)
+					/* ELB CS0 Configuration Reg    */
+#define CS0_ADDR_REG	regptr(MSP_SLP_BASE + 0x84)
+					/* ELB CS0 Base Address Reg     */
+#define CS0_MASK_REG	regptr(MSP_SLP_BASE + 0x88)
+					/* ELB CS0 Mask Register        */
+#define CS0_ACCESS_REG	regptr(MSP_SLP_BASE + 0x8C)
+					/* ELB CS0 access register      */
+
+#define CS1_CNFG_REG	regptr(MSP_SLP_BASE + 0x90)
+					/* ELB CS1 Configuration Reg    */
+#define CS1_ADDR_REG	regptr(MSP_SLP_BASE + 0x94)
+					/* ELB CS1 Base Address Reg     */
+#define CS1_MASK_REG	regptr(MSP_SLP_BASE + 0x98)
+					/* ELB CS1 Mask Register        */
+#define CS1_ACCESS_REG	regptr(MSP_SLP_BASE + 0x9C)
+					/* ELB CS1 access register      */
+
+#define CS2_CNFG_REG	regptr(MSP_SLP_BASE + 0xA0)
+					/* ELB CS2 Configuration Reg    */
+#define CS2_ADDR_REG	regptr(MSP_SLP_BASE + 0xA4)
+					/* ELB CS2 Base Address Reg     */
+#define CS2_MASK_REG	regptr(MSP_SLP_BASE + 0xA8)
+					/* ELB CS2 Mask Register        */
+#define CS2_ACCESS_REG	regptr(MSP_SLP_BASE + 0xAC)
+					/* ELB CS2 access register      */
+
+#define CS3_CNFG_REG	regptr(MSP_SLP_BASE + 0xB0)
+					/* ELB CS3 Configuration Reg    */
+#define CS3_ADDR_REG	regptr(MSP_SLP_BASE + 0xB4)
+					/* ELB CS3 Base Address Reg     */
+#define CS3_MASK_REG	regptr(MSP_SLP_BASE + 0xB8)
+					/* ELB CS3 Mask Register        */
+#define CS3_ACCESS_REG	regptr(MSP_SLP_BASE + 0xBC)
+					/* ELB CS3 access register      */
+
+#define CS4_CNFG_REG	regptr(MSP_SLP_BASE + 0xC0)
+					/* ELB CS4 Configuration Reg    */
+#define CS4_ADDR_REG	regptr(MSP_SLP_BASE + 0xC4)
+					/* ELB CS4 Base Address Reg     */
+#define CS4_MASK_REG	regptr(MSP_SLP_BASE + 0xC8)
+					/* ELB CS4 Mask Register        */
+#define CS4_ACCESS_REG	regptr(MSP_SLP_BASE + 0xCC)
+					/* ELB CS4 access register      */
+
+#define CS5_CNFG_REG	regptr(MSP_SLP_BASE + 0xD0)
+					/* ELB CS5 Configuration Reg    */
+#define CS5_ADDR_REG	regptr(MSP_SLP_BASE + 0xD4)
+					/* ELB CS5 Base Address Reg     */
+#define CS5_MASK_REG	regptr(MSP_SLP_BASE + 0xD8)
+					/* ELB CS5 Mask Register        */
+#define CS5_ACCESS_REG	regptr(MSP_SLP_BASE + 0xDC)
+					/* ELB CS5 access register      */
+
+/* reserved			       0xE0 - 0xE8                      */
+#define ELB_1PC_EN_REG	regptr(MSP_SLP_BASE + 0xEC)
+					/* ELB single PC card detect    */
+
+/* reserved			       0xF0 - 0xF8                      */
+#define ELB_CLK_CFG_REG	regptr(MSP_SLP_BASE + 0xFC)
+					/* SDRAM read/ELB timing Reg    */
+
+/* Extended UART status registers */
+#define UART0_STATUS_REG	regptr(MSP_UART0_BASE + 0x0c0)
+					/* UART Status Register 0       */
+#define UART1_STATUS_REG	regptr(MSP_UART1_BASE + 0x170)
+					/* UART Status Register 1       */
+
+/* Performance monitoring registers */
+#define PERF_MON_CTRL_REG	regptr(MSP_SLP_BASE + 0x140)
+					/* Performance monitor control  */
+#define PERF_MON_CLR_REG	regptr(MSP_SLP_BASE + 0x144)
+					/* Performance monitor clear    */
+#define PERF_MON_CNTH_REG	regptr(MSP_SLP_BASE + 0x148)
+					/* Perf monitor counter high    */
+#define PERF_MON_CNTL_REG	regptr(MSP_SLP_BASE + 0x14C)
+					/* Perf monitor counter low     */
+
+/* System control registers */
+#define SYS_CTRL_REG		regptr(MSP_SLP_BASE + 0x150)
+					/* System control register      */
+#define SYS_ERR1_REG		regptr(MSP_SLP_BASE + 0x154)
+					/* System Error status 1        */
+#define SYS_ERR2_REG		regptr(MSP_SLP_BASE + 0x158)
+					/* System Error status 2        */
+#define SYS_INT_CFG_REG		regptr(MSP_SLP_BASE + 0x15C)
+					/* System Interrupt config      */
+
+/* Voice Engine Memory configuration */
+#define VE_MEM_REG		regptr(MSP_SLP_BASE + 0x17C)
+					/* Voice engine memory config   */
+
+/* CPU/SLP Error Status registers */
+#define CPU_ERR1_REG		regptr(MSP_SLP_BASE + 0x180)
+					/* CPU/SLP Error status 1       */
+#define CPU_ERR2_REG		regptr(MSP_SLP_BASE + 0x184)
+					/* CPU/SLP Error status 1       */
+
+#define EXTENDED_GPIO_REG	regptr(MSP_SLP_BASE + 0x188)
+					/* Extended GPIO register       */
+
+/* System Error registers */
+#define SLP_ERR_STS_REG		regptr(MSP_SLP_BASE + 0x190)
+					/* Int status for SLP errors    */
+#define SLP_ERR_MSK_REG		regptr(MSP_SLP_BASE + 0x194)
+					/* Int mask for SLP errors      */
+#define SLP_ELB_ERST_REG	regptr(MSP_SLP_BASE + 0x198)
+					/* External ELB reset           */
+#define SLP_BOOT_STS_REG	regptr(MSP_SLP_BASE + 0x19C)
+					/* Boot Status                  */
+
+/* Extended ELB addressing */
+#define CS0_EXT_ADDR_REG	regptr(MSP_SLP_BASE + 0x1A0)
+					/* CS0 Extended address         */
+#define CS1_EXT_ADDR_REG	regptr(MSP_SLP_BASE + 0x1A4)
+					/* CS1 Extended address         */
+#define CS2_EXT_ADDR_REG	regptr(MSP_SLP_BASE + 0x1A8)
+					/* CS2 Extended address         */
+#define CS3_EXT_ADDR_REG	regptr(MSP_SLP_BASE + 0x1AC)
+					/* CS3 Extended address         */
+/* reserved					      0x1B0             */
+#define CS5_EXT_ADDR_REG	regptr(MSP_SLP_BASE + 0x1B4)
+					/* CS5 Extended address         */
+
+/* PLL Adjustment registers */
+#define PLL_LOCK_REG		regptr(MSP_SLP_BASE + 0x200)
+					/* PLL0 lock status             */
+#define PLL_ARST_REG		regptr(MSP_SLP_BASE + 0x204)
+					/* PLL Analog reset status      */
+#define PLL0_ADJ_REG		regptr(MSP_SLP_BASE + 0x208)
+					/* PLL0 Adjustment value        */
+#define PLL1_ADJ_REG		regptr(MSP_SLP_BASE + 0x20C)
+					/* PLL1 Adjustment value        */
+
+/*
+ ***************************************************************************
+ * Peripheral Register definitions                                         *
+ ***************************************************************************
+ */
+
+/* Peripheral status */
+#define PER_CTRL_REG		regptr(MSP_PER_BASE + 0x50)
+					/* Peripheral control register  */
+#define PER_STS_REG		regptr(MSP_PER_BASE + 0x54)
+					/* Peripheral status register   */
+
+/* SPI/MPI Registers */
+#define SMPI_TX_SZ_REG		regptr(MSP_PER_BASE + 0x58)
+					/* SPI/MPI Tx Size register     */
+#define SMPI_RX_SZ_REG		regptr(MSP_PER_BASE + 0x5C)
+					/* SPI/MPI Rx Size register     */
+#define SMPI_CTL_REG		regptr(MSP_PER_BASE + 0x60)
+					/* SPI/MPI Control register     */
+#define SMPI_MS_REG		regptr(MSP_PER_BASE + 0x64)
+					/* SPI/MPI Chip Select reg      */
+#define SMPI_CORE_DATA_REG	regptr(MSP_PER_BASE + 0xC0)
+					/* SPI/MPI Core Data reg        */
+#define SMPI_CORE_CTRL_REG	regptr(MSP_PER_BASE + 0xC4)
+					/* SPI/MPI Core Control reg     */
+#define SMPI_CORE_STAT_REG	regptr(MSP_PER_BASE + 0xC8)
+					/* SPI/MPI Core Status reg      */
+#define SMPI_CORE_SSEL_REG	regptr(MSP_PER_BASE + 0xCC)
+					/* SPI/MPI Core Ssel reg        */
+#define SMPI_FIFO_REG		regptr(MSP_PER_BASE + 0xD0)
+					/* SPI/MPI Data FIFO reg        */
+
+/* Peripheral Block Error Registers           */
+#define PER_ERR_STS_REG		regptr(MSP_PER_BASE + 0x70)
+					/* Error Bit Status Register    */
+#define PER_ERR_MSK_REG		regptr(MSP_PER_BASE + 0x74)
+					/* Error Bit Mask Register      */
+#define PER_HDR1_REG		regptr(MSP_PER_BASE + 0x78)
+					/* Error Header 1 Register      */
+#define PER_HDR2_REG		regptr(MSP_PER_BASE + 0x7C)
+					/* Error Header 2 Register      */
+
+/* Peripheral Block Interrupt Registers       */
+#define PER_INT_STS_REG		regptr(MSP_PER_BASE + 0x80)
+					/* Interrupt status register    */
+#define PER_INT_MSK_REG		regptr(MSP_PER_BASE + 0x84)
+					/* Interrupt Mask Register      */
+#define GPIO_INT_STS_REG	regptr(MSP_PER_BASE + 0x88)
+					/* GPIO interrupt status reg    */
+#define GPIO_INT_MSK_REG	regptr(MSP_PER_BASE + 0x8C)
+					/* GPIO interrupt MASK Reg      */
+
+/* POLO GPIO registers                        */
+#define POLO_GPIO_DAT1_REG	regptr(MSP_PER_BASE + 0x0E0)
+					/* Polo GPIO[8:0]  data reg     */
+#define POLO_GPIO_CFG1_REG	regptr(MSP_PER_BASE + 0x0E4)
+					/* Polo GPIO[7:0]  config reg   */
+#define POLO_GPIO_CFG2_REG	regptr(MSP_PER_BASE + 0x0E8)
+					/* Polo GPIO[15:8] config reg   */
+#define POLO_GPIO_OD1_REG	regptr(MSP_PER_BASE + 0x0EC)
+					/* Polo GPIO[31:0] output drive */
+#define POLO_GPIO_CFG3_REG	regptr(MSP_PER_BASE + 0x170)
+					/* Polo GPIO[23:16] config reg  */
+#define POLO_GPIO_DAT2_REG	regptr(MSP_PER_BASE + 0x174)
+					/* Polo GPIO[15:9]  data reg    */
+#define POLO_GPIO_DAT3_REG	regptr(MSP_PER_BASE + 0x178)
+					/* Polo GPIO[23:16]  data reg   */
+#define POLO_GPIO_DAT4_REG	regptr(MSP_PER_BASE + 0x17C)
+					/* Polo GPIO[31:24]  data reg   */
+#define POLO_GPIO_DAT5_REG	regptr(MSP_PER_BASE + 0x180)
+					/* Polo GPIO[39:32]  data reg   */
+#define POLO_GPIO_DAT6_REG	regptr(MSP_PER_BASE + 0x184)
+					/* Polo GPIO[47:40]  data reg   */
+#define POLO_GPIO_DAT7_REG	regptr(MSP_PER_BASE + 0x188)
+					/* Polo GPIO[54:48]  data reg   */
+#define POLO_GPIO_CFG4_REG	regptr(MSP_PER_BASE + 0x18C)
+					/* Polo GPIO[31:24] config reg  */
+#define POLO_GPIO_CFG5_REG	regptr(MSP_PER_BASE + 0x190)
+					/* Polo GPIO[39:32] config reg  */
+#define POLO_GPIO_CFG6_REG	regptr(MSP_PER_BASE + 0x194)
+					/* Polo GPIO[47:40] config reg  */
+#define POLO_GPIO_CFG7_REG	regptr(MSP_PER_BASE + 0x198)
+					/* Polo GPIO[54:48] config reg  */
+#define POLO_GPIO_OD2_REG	regptr(MSP_PER_BASE + 0x19C)
+					/* Polo GPIO[54:32] output drive */
+
+/* Generic GPIO registers                     */
+#define GPIO_DATA1_REG		regptr(MSP_PER_BASE + 0x170)
+					/* GPIO[1:0] data register      */
+#define GPIO_DATA2_REG		regptr(MSP_PER_BASE + 0x174)
+					/* GPIO[5:2] data register      */
+#define GPIO_DATA3_REG		regptr(MSP_PER_BASE + 0x178)
+					/* GPIO[9:6] data register      */
+#define GPIO_DATA4_REG		regptr(MSP_PER_BASE + 0x17C)
+					/* GPIO[15:10] data register    */
+#define GPIO_CFG1_REG		regptr(MSP_PER_BASE + 0x180)
+					/* GPIO[1:0] config register    */
+#define GPIO_CFG2_REG		regptr(MSP_PER_BASE + 0x184)
+					/* GPIO[5:2] config register    */
+#define GPIO_CFG3_REG		regptr(MSP_PER_BASE + 0x188)
+					/* GPIO[9:6] config register    */
+#define GPIO_CFG4_REG		regptr(MSP_PER_BASE + 0x18C)
+					/* GPIO[15:10] config register  */
+#define GPIO_OD_REG		regptr(MSP_PER_BASE + 0x190)
+					/* GPIO[15:0] output drive      */
+
+/*
+ ***************************************************************************
+ * CPU Interface register definitions                                      *
+ ***************************************************************************
+ */
+#define PCI_FLUSH_REG		regptr(MSP_CPUIF_BASE + 0x00)
+					/* PCI-SDRAM queue flush trigger */
+#define OCP_ERR1_REG		regptr(MSP_CPUIF_BASE + 0x04)
+					/* OCP Error Attribute 1        */
+#define OCP_ERR2_REG		regptr(MSP_CPUIF_BASE + 0x08)
+					/* OCP Error Attribute 2        */
+#define OCP_STS_REG		regptr(MSP_CPUIF_BASE + 0x0C)
+					/* OCP Error Status             */
+#define CPUIF_PM_REG		regptr(MSP_CPUIF_BASE + 0x10)
+					/* CPU policy configuration     */
+#define CPUIF_CFG_REG		regptr(MSP_CPUIF_BASE + 0x10)
+					/* Misc configuration options   */
+
+/* Central Interrupt Controller Registers */
+#define MSP_CIC_BASE		(MSP_CPUIF_BASE + 0x8000)
+					/* Central Interrupt registers  */
+#define CIC_EXT_CFG_REG		regptr(MSP_CIC_BASE + 0x00)
+					/* External interrupt config    */
+#define CIC_STS_REG		regptr(MSP_CIC_BASE + 0x04)
+					/* CIC Interrupt Status         */
+#define CIC_VPE0_MSK_REG	regptr(MSP_CIC_BASE + 0x08)
+					/* VPE0 Interrupt Mask          */
+#define CIC_VPE1_MSK_REG	regptr(MSP_CIC_BASE + 0x0C)
+					/* VPE1 Interrupt Mask          */
+#define CIC_TC0_MSK_REG		regptr(MSP_CIC_BASE + 0x10)
+					/* Thread Context 0 Int Mask    */
+#define CIC_TC1_MSK_REG		regptr(MSP_CIC_BASE + 0x14)
+					/* Thread Context 1 Int Mask    */
+#define CIC_TC2_MSK_REG		regptr(MSP_CIC_BASE + 0x18)
+					/* Thread Context 2 Int Mask    */
+#define CIC_TC3_MSK_REG		regptr(MSP_CIC_BASE + 0x18)
+					/* Thread Context 3 Int Mask    */
+#define CIC_TC4_MSK_REG		regptr(MSP_CIC_BASE + 0x18)
+					/* Thread Context 4 Int Mask    */
+#define CIC_PCIMSI_STS_REG	regptr(MSP_CIC_BASE + 0x18)
+#define CIC_PCIMSI_MSK_REG	regptr(MSP_CIC_BASE + 0x18)
+#define CIC_PCIFLSH_REG		regptr(MSP_CIC_BASE + 0x18)
+#define CIC_VPE0_SWINT_REG	regptr(MSP_CIC_BASE + 0x08)
+
+
+/*
+ ***************************************************************************
+ * Memory controller registers                                             *
+ ***************************************************************************
+ */
+#define MEM_CFG1_REG		regptr(MSP_MEM_CFG_BASE + 0x00)
+#define MEM_SS_ADDR		regptr(MSP_MEM_CFG_BASE + 0x00)
+#define MEM_SS_DATA		regptr(MSP_MEM_CFG_BASE + 0x04)
+#define MEM_SS_WRITE		regptr(MSP_MEM_CFG_BASE + 0x08)
+
+/*
+ ***************************************************************************
+ * PCI controller registers                                                *
+ ***************************************************************************
+ */
+#define PCI_BASE_REG		regptr(MSP_PCI_BASE + 0x00)
+#define PCI_CONFIG_SPACE_REG	regptr(MSP_PCI_BASE + 0x800)
+#define PCI_JTAG_DEVID_REG	regptr(MSP_SLP_BASE + 0x13c)
+
+/*
+ ########################################################################
+ #  Register content & macro definitions                                #
+ ########################################################################
+ */
+
+/*
+ ***************************************************************************
+ * DEV_ID defines                                                          *
+ ***************************************************************************
+ */
+#define DEV_ID_PCI_DIS		(1 << 26)       /* Set if PCI disabled */
+#define DEV_ID_PCI_HOST		(1 << 20)       /* Set if PCI host */
+#define DEV_ID_SINGLE_PC	(1 << 19)       /* Set if single PC Card */
+#define DEV_ID_FAMILY		(0xff << 8)     /* family ID code */
+#define POLO_ZEUS_SUB_FAMILY	(0x7  << 16)    /* sub family for Polo/Zeus */
+
+#define MSPFPGA_ID		(0x00  << 8)    /* you are on your own here */
+#define MSP5000_ID		(0x50  << 8)
+#define MSP4F00_ID		(0x4f  << 8)    /* FPGA version of MSP4200 */
+#define MSP4E00_ID		(0x4f  << 8)    /* FPGA version of MSP7120 */
+#define MSP4200_ID		(0x42  << 8)
+#define MSP4000_ID		(0x40  << 8)
+#define MSP2XXX_ID		(0x20  << 8)
+#define MSPZEUS_ID		(0x10  << 8)
+
+#define MSP2004_SUB_ID		(0x0   << 16)
+#define MSP2005_SUB_ID		(0x1   << 16)
+#define MSP2006_SUB_ID		(0x1   << 16)
+#define MSP2007_SUB_ID		(0x2   << 16)
+#define MSP2010_SUB_ID		(0x3   << 16)
+#define MSP2015_SUB_ID		(0x4   << 16)
+#define MSP2020_SUB_ID		(0x5   << 16)
+#define MSP2100_SUB_ID		(0x6   << 16)
+
+/*
+ ***************************************************************************
+ * RESET defines                                                           *
+ ***************************************************************************
+ */
+#define MSP_GR_RST		(0x01 << 0)     /* Global reset bit     */
+#define MSP_MR_RST		(0x01 << 1)     /* MIPS reset bit       */
+#define MSP_PD_RST		(0x01 << 2)     /* PVC DMA reset bit    */
+#define MSP_PP_RST		(0x01 << 3)     /* PVC reset bit        */
+/* reserved                                                             */
+#define MSP_EA_RST		(0x01 << 6)     /* Mac A reset bit      */
+#define MSP_EB_RST		(0x01 << 7)     /* Mac B reset bit      */
+#define MSP_SE_RST		(0x01 << 8)     /* Security Eng reset bit */
+#define MSP_PB_RST		(0x01 << 9)     /* Per block reset bit  */
+#define MSP_EC_RST		(0x01 << 10)    /* Mac C reset bit      */
+#define MSP_TW_RST		(0x01 << 11)    /* TWI reset bit        */
+#define MSP_SPI_RST		(0x01 << 12)    /* SPI/MPI reset bit    */
+#define MSP_U1_RST		(0x01 << 13)    /* UART1 reset bit      */
+#define MSP_U0_RST		(0x01 << 14)    /* UART0 reset bit      */
+
+/*
+ ***************************************************************************
+ * UART defines                                                            *
+ ***************************************************************************
+ */
+#define MSP_BASE_BAUD		25000000
+#define MSP_UART_REG_LEN	0x20
+
+/*
+ ***************************************************************************
+ * ELB defines                                                             *
+ ***************************************************************************
+ */
+#define PCCARD_32		0x02    /* Set if is PCCARD 32 (Cardbus) */
+#define SINGLE_PCCARD		0x01    /* Set to enable single PC card */
+
+/*
+ ***************************************************************************
+ * CIC defines                                                             *
+ ***************************************************************************
+ */
+
+/* CIC_EXT_CFG_REG */
+#define EXT_INT_POL(eirq)			(1 << (eirq + 8))
+#define EXT_INT_EDGE(eirq)			(1 << eirq)
+
+#define CIC_EXT_SET_TRIGGER_LEVEL(reg, eirq)	(reg &= ~EXT_INT_EDGE(eirq))
+#define CIC_EXT_SET_TRIGGER_EDGE(reg, eirq)	(reg |= EXT_INT_EDGE(eirq))
+#define CIC_EXT_SET_ACTIVE_HI(reg, eirq)	(reg |= EXT_INT_POL(eirq))
+#define CIC_EXT_SET_ACTIVE_LO(reg, eirq)	(reg &= ~EXT_INT_POL(eirq))
+#define CIC_EXT_SET_ACTIVE_RISING		CIC_EXT_SET_ACTIVE_HI
+#define CIC_EXT_SET_ACTIVE_FALLING		CIC_EXT_SET_ACTIVE_LO
+
+#define CIC_EXT_IS_TRIGGER_LEVEL(reg, eirq) \
+				((reg & EXT_INT_EDGE(eirq)) == 0)
+#define CIC_EXT_IS_TRIGGER_EDGE(reg, eirq)	(reg & EXT_INT_EDGE(eirq))
+#define CIC_EXT_IS_ACTIVE_HI(reg, eirq)		(reg & EXT_INT_POL(eirq))
+#define CIC_EXT_IS_ACTIVE_LO(reg, eirq) \
+				((reg & EXT_INT_POL(eirq)) == 0)
+#define CIC_EXT_IS_ACTIVE_RISING		CIC_EXT_IS_ACTIVE_HI
+#define CIC_EXT_IS_ACTIVE_FALLING		CIC_EXT_IS_ACTIVE_LO
+
+/*
+ ***************************************************************************
+ * Memory Controller defines                                               *
+ ***************************************************************************
+ */
+
+/* Indirect memory controller registers */
+#define DDRC_CFG(n)		(n)
+#define DDRC_DEBUG(n)		(0x04 + n)
+#define DDRC_CTL(n)		(0x40 + n)
+
+/* Macro to perform DDRC indirect write */
+#define DDRC_INDIRECT_WRITE(reg, mask, value) \
+({ \
+	*MEM_SS_ADDR = (((mask) & 0xf) << 8) | ((reg) & 0xff); \
+	*MEM_SS_DATA = (value); \
+	*MEM_SS_WRITE = 1; \
+})
+
+/*
+ ***************************************************************************
+ * SPI/MPI Mode                                                            *
+ ***************************************************************************
+ */
+#define SPI_MPI_RX_BUSY		0x00008000	/* SPI/MPI Receive Busy */
+#define SPI_MPI_FIFO_EMPTY	0x00004000	/* SPI/MPI Fifo Empty   */
+#define SPI_MPI_TX_BUSY		0x00002000	/* SPI/MPI Transmit Busy */
+#define SPI_MPI_FIFO_FULL	0x00001000	/* SPI/MPU FIFO full    */
+
+/*
+ ***************************************************************************
+ * SPI/MPI Control Register                                                *
+ ***************************************************************************
+ */
+#define SPI_MPI_RX_START	0x00000004	/* Start receive command */
+#define SPI_MPI_FLUSH_Q		0x00000002	/* Flush SPI/MPI Queue */
+#define SPI_MPI_TX_START	0x00000001	/* Start Transmit Command */
+
+#endif /* !_ASM_MSP_REGS_H */
diff --git a/arch/mips/include/asm/pmc-sierra/msp71xx/msp_slp_int.h b/arch/mips/include/asm/pmc-sierra/msp71xx/msp_slp_int.h
new file mode 100644
index 0000000..96d4c8c
--- /dev/null
+++ b/arch/mips/include/asm/pmc-sierra/msp71xx/msp_slp_int.h
@@ -0,0 +1,141 @@
+/*
+ * Defines for the MSP interrupt controller.
+ *
+ * Copyright (C) 1999 MIPS Technologies, Inc.  All rights reserved.
+ * Author: Carsten Langgaard, carstenl@mips.com
+ *
+ * ########################################################################
+ *
+ *  This program is free software; you can distribute it and/or modify it
+ *  under the terms of the GNU General Public License (Version 2) as
+ *  published by the Free Software Foundation.
+ *
+ *  This program is distributed in the hope it will be useful, but WITHOUT
+ *  ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ *  FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
+ *  for more details.
+ *
+ *  You should have received a copy of the GNU General Public License along
+ *  with this program; if not, write to the Free Software Foundation, Inc.,
+ *  59 Temple Place - Suite 330, Boston MA 02111-1307, USA.
+ *
+ * ########################################################################
+ */
+
+#ifndef _MSP_SLP_INT_H
+#define _MSP_SLP_INT_H
+
+/*
+ * The PMC-Sierra SLP interrupts are arranged in a 3 level cascaded
+ * hierarchical system.  The first level are the direct MIPS interrupts
+ * and are assigned the interrupt range 0-7.  The second level is the SLM
+ * interrupt controller and is assigned the range 8-39.  The third level
+ * comprises the Peripherial block, the PCI block, the PCI MSI block and
+ * the SLP.  The PCI interrupts and the SLP errors are handled by the
+ * relevant subsystems so the core interrupt code needs only concern
+ * itself with the Peripheral block.  These are assigned interrupts in
+ * the range 40-71.
+ */
+
+/*
+ * IRQs directly connected to CPU
+ */
+#define MSP_MIPS_INTBASE	0
+#define MSP_INT_SW0		0  /* IRQ for swint0,         C_SW0  */
+#define MSP_INT_SW1		1  /* IRQ for swint1,         C_SW1  */
+#define MSP_INT_MAC0 		2  /* IRQ for MAC 0,          C_IRQ0 */
+#define MSP_INT_MAC1		3  /* IRQ for MAC 1,          C_IRQ1 */
+#define MSP_INT_C_IRQ2		4  /* Wired off,              C_IRQ2 */
+#define MSP_INT_VE		5  /* IRQ for Voice Engine,   C_IRQ3 */
+#define MSP_INT_SLP		6  /* IRQ for SLM block,      C_IRQ4 */
+#define MSP_INT_TIMER		7  /* IRQ for the MIPS timer, C_IRQ5 */
+
+/*
+ * IRQs cascaded on CPU interrupt 4 (CAUSE bit 12, C_IRQ4)
+ * These defines should be tied to the register definition for the SLM
+ * interrupt routine.  For now, just use hard-coded values.
+ */
+#define MSP_SLP_INTBASE		(MSP_MIPS_INTBASE + 8)
+#define MSP_INT_EXT0		(MSP_SLP_INTBASE + 0)
+					/* External interrupt 0         */
+#define MSP_INT_EXT1		(MSP_SLP_INTBASE + 1)
+					/* External interrupt 1         */
+#define MSP_INT_EXT2		(MSP_SLP_INTBASE + 2)
+					/* External interrupt 2         */
+#define MSP_INT_EXT3		(MSP_SLP_INTBASE + 3)
+					/* External interrupt 3         */
+/* Reserved					   4-7                  */
+
+/*
+ *************************************************************************
+ * DANGER/DANGER/DANGER/DANGER/DANGER/DANGER/DANGER/DANGER/DANGER/DANGER *
+ * Some MSP produces have this interrupt labelled as Voice and some are  *
+ * SEC mbox ...                                                          *
+ *************************************************************************
+ */
+#define MSP_INT_SLP_VE		(MSP_SLP_INTBASE + 8)
+					/* Cascaded IRQ for Voice Engine*/
+#define MSP_INT_SLP_TDM		(MSP_SLP_INTBASE + 9)
+					/* TDM interrupt                */
+#define MSP_INT_SLP_MAC0	(MSP_SLP_INTBASE + 10)
+					/* Cascaded IRQ for MAC 0       */
+#define MSP_INT_SLP_MAC1	(MSP_SLP_INTBASE + 11)
+					/* Cascaded IRQ for MAC 1       */
+#define MSP_INT_SEC		(MSP_SLP_INTBASE + 12)
+					/* IRQ for security engine      */
+#define	MSP_INT_PER		(MSP_SLP_INTBASE + 13)
+					/* Peripheral interrupt         */
+#define	MSP_INT_TIMER0		(MSP_SLP_INTBASE + 14)
+					/* SLP timer 0                  */
+#define	MSP_INT_TIMER1		(MSP_SLP_INTBASE + 15)
+					/* SLP timer 1                  */
+#define	MSP_INT_TIMER2		(MSP_SLP_INTBASE + 16)
+					/* SLP timer 2                  */
+#define	MSP_INT_SLP_TIMER	(MSP_SLP_INTBASE + 17)
+					/* Cascaded MIPS timer          */
+#define MSP_INT_BLKCP		(MSP_SLP_INTBASE + 18)
+					/* Block Copy                   */
+#define MSP_INT_UART0		(MSP_SLP_INTBASE + 19)
+					/* UART 0                       */
+#define MSP_INT_PCI		(MSP_SLP_INTBASE + 20)
+					/* PCI subsystem                */
+#define MSP_INT_PCI_DBELL	(MSP_SLP_INTBASE + 21)
+					/* PCI doorbell                 */
+#define MSP_INT_PCI_MSI		(MSP_SLP_INTBASE + 22)
+					/* PCI Message Signal           */
+#define MSP_INT_PCI_BC0		(MSP_SLP_INTBASE + 23)
+					/* PCI Block Copy 0             */
+#define MSP_INT_PCI_BC1		(MSP_SLP_INTBASE + 24)
+					/* PCI Block Copy 1             */
+#define MSP_INT_SLP_ERR		(MSP_SLP_INTBASE + 25)
+					/* SLP error condition          */
+#define MSP_INT_MAC2		(MSP_SLP_INTBASE + 26)
+					/* IRQ for MAC2                 */
+/* Reserved					   26-31                */
+
+/*
+ * IRQs cascaded on SLP PER interrupt (MSP_INT_PER)
+ */
+#define MSP_PER_INTBASE		(MSP_SLP_INTBASE + 32)
+/* Reserved					   0-1                  */
+#define MSP_INT_UART1		(MSP_PER_INTBASE + 2)
+					/* UART 1                       */
+/* Reserved					   3-5                  */
+#define MSP_INT_2WIRE		(MSP_PER_INTBASE + 6)
+					/* 2-wire                       */
+#define MSP_INT_TM0		(MSP_PER_INTBASE + 7)
+					/* Peripheral timer block out 0 */
+#define MSP_INT_TM1		(MSP_PER_INTBASE + 8)
+					/* Peripheral timer block out 1 */
+/* Reserved					   9                    */
+#define MSP_INT_SPRX		(MSP_PER_INTBASE + 10)
+					/* SPI RX complete              */
+#define MSP_INT_SPTX		(MSP_PER_INTBASE + 11)
+					/* SPI TX complete              */
+#define MSP_INT_GPIO		(MSP_PER_INTBASE + 12)
+					/* GPIO                         */
+#define MSP_INT_PER_ERR		(MSP_PER_INTBASE + 13)
+					/* Peripheral error             */
+/* Reserved					   14-31                */
+
+#endif /* !_MSP_SLP_INT_H */
diff --git a/arch/mips/include/asm/pmc-sierra/msp71xx/war.h b/arch/mips/include/asm/pmc-sierra/msp71xx/war.h
new file mode 100644
index 0000000..0bf48fc
--- /dev/null
+++ b/arch/mips/include/asm/pmc-sierra/msp71xx/war.h
@@ -0,0 +1,28 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 2002, 2004, 2007 by Ralf Baechle <ralf@linux-mips.org>
+ */
+#ifndef __ASM_MIPS_PMC_SIERRA_WAR_H
+#define __ASM_MIPS_PMC_SIERRA_WAR_H
+
+#define R4600_V1_INDEX_ICACHEOP_WAR	0
+#define R4600_V1_HIT_CACHEOP_WAR	0
+#define R4600_V2_HIT_CACHEOP_WAR	0
+#define R5432_CP0_INTERRUPT_WAR		0
+#define BCM1250_M3_WAR			0
+#define SIBYTE_1956_WAR			0
+#define MIPS4K_ICACHE_REFILL_WAR	0
+#define MIPS_CACHE_SYNC_WAR		0
+#define TX49XX_ICACHE_INDEX_INV_WAR	0
+#define RM9000_CDEX_SMP_WAR		0
+#define ICACHE_REFILLS_WORKAROUND_WAR	0
+#define R10000_LLSC_WAR			0
+#if defined(CONFIG_PMC_MSP7120_EVAL) || defined(CONFIG_PMC_MSP7120_GW) || \
+	defined(CONFIG_PMC_MSP7120_FPGA)
+#define MIPS34K_MISSED_ITLB_WAR         1
+#endif
+
+#endif /* __ASM_MIPS_PMC_SIERRA_WAR_H */