MIPS: Move headfiles to new location below arch/mips/include

Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

1 files changed, 589 insertions, 0 deletions

diff --git a/arch/mips/include/asm/io.h b/arch/mips/include/asm/io.h
new file mode 100644
index 0000000..501a40b
--- /dev/null
+++ b/arch/mips/include/asm/io.h
@@ -0,0 +1,589 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 1994, 1995 Waldorf GmbH
+ * Copyright (C) 1994 - 2000, 06 Ralf Baechle
+ * Copyright (C) 1999, 2000 Silicon Graphics, Inc.
+ * Copyright (C) 2004, 2005  MIPS Technologies, Inc.  All rights reserved.
+ *	Author:	Maciej W. Rozycki <macro@mips.com>
+ */
+#ifndef _ASM_IO_H
+#define _ASM_IO_H
+
+#include <linux/compiler.h>
+#include <linux/kernel.h>
+#include <linux/types.h>
+
+#include <asm/addrspace.h>
+#include <asm/byteorder.h>
+#include <asm/cpu.h>
+#include <asm/cpu-features.h>
+#include <asm-generic/iomap.h>
+#include <asm/page.h>
+#include <asm/pgtable-bits.h>
+#include <asm/processor.h>
+#include <asm/string.h>
+
+#include <ioremap.h>
+#include <mangle-port.h>
+
+/*
+ * Slowdown I/O port space accesses for antique hardware.
+ */
+#undef CONF_SLOWDOWN_IO
+
+/*
+ * Raw operations are never swapped in software.  OTOH values that raw
+ * operations are working on may or may not have been swapped by the bus
+ * hardware.  An example use would be for flash memory that's used for
+ * execute in place.
+ */
+# define __raw_ioswabb(a, x)	(x)
+# define __raw_ioswabw(a, x)	(x)
+# define __raw_ioswabl(a, x)	(x)
+# define __raw_ioswabq(a, x)	(x)
+# define ____raw_ioswabq(a, x)	(x)
+
+/* ioswab[bwlq], __mem_ioswab[bwlq] are defined in mangle-port.h */
+
+#define IO_SPACE_LIMIT 0xffff
+
+/*
+ * On MIPS I/O ports are memory mapped, so we access them using normal
+ * load/store instructions. mips_io_port_base is the virtual address to
+ * which all ports are being mapped.  For sake of efficiency some code
+ * assumes that this is an address that can be loaded with a single lui
+ * instruction, so the lower 16 bits must be zero.  Should be true on
+ * on any sane architecture; generic code does not use this assumption.
+ */
+extern const unsigned long mips_io_port_base;
+
+/*
+ * Gcc will generate code to load the value of mips_io_port_base after each
+ * function call which may be fairly wasteful in some cases.  So we don't
+ * play quite by the book.  We tell gcc mips_io_port_base is a long variable
+ * which solves the code generation issue.  Now we need to violate the
+ * aliasing rules a little to make initialization possible and finally we
+ * will need the barrier() to fight side effects of the aliasing chat.
+ * This trickery will eventually collapse under gcc's optimizer.  Oh well.
+ */
+static inline void set_io_port_base(unsigned long base)
+{
+	* (unsigned long *) &mips_io_port_base = base;
+	barrier();
+}
+
+/*
+ * Thanks to James van Artsdalen for a better timing-fix than
+ * the two short jumps: using outb's to a nonexistent port seems
+ * to guarantee better timings even on fast machines.
+ *
+ * On the other hand, I'd like to be sure of a non-existent port:
+ * I feel a bit unsafe about using 0x80 (should be safe, though)
+ *
+ *		Linus
+ *
+ */
+
+#define __SLOW_DOWN_IO \
+	__asm__ __volatile__( \
+		"sb\t$0,0x80(%0)" \
+		: : "r" (mips_io_port_base));
+
+#ifdef CONF_SLOWDOWN_IO
+#ifdef REALLY_SLOW_IO
+#define SLOW_DOWN_IO { __SLOW_DOWN_IO; __SLOW_DOWN_IO; __SLOW_DOWN_IO; __SLOW_DOWN_IO; }
+#else
+#define SLOW_DOWN_IO __SLOW_DOWN_IO
+#endif
+#else
+#define SLOW_DOWN_IO
+#endif
+
+/*
+ *     virt_to_phys    -       map virtual addresses to physical
+ *     @address: address to remap
+ *
+ *     The returned physical address is the physical (CPU) mapping for
+ *     the memory address given. It is only valid to use this function on
+ *     addresses directly mapped or allocated via kmalloc.
+ *
+ *     This function does not give bus mappings for DMA transfers. In
+ *     almost all conceivable cases a device driver should not be using
+ *     this function
+ */
+static inline unsigned long virt_to_phys(volatile const void *address)
+{
+	return (unsigned long)address - PAGE_OFFSET + PHYS_OFFSET;
+}
+
+/*
+ *     phys_to_virt    -       map physical address to virtual
+ *     @address: address to remap
+ *
+ *     The returned virtual address is a current CPU mapping for
+ *     the memory address given. It is only valid to use this function on
+ *     addresses that have a kernel mapping
+ *
+ *     This function does not handle bus mappings for DMA transfers. In
+ *     almost all conceivable cases a device driver should not be using
+ *     this function
+ */
+static inline void * phys_to_virt(unsigned long address)
+{
+	return (void *)(address + PAGE_OFFSET - PHYS_OFFSET);
+}
+
+/*
+ * ISA I/O bus memory addresses are 1:1 with the physical address.
+ */
+static inline unsigned long isa_virt_to_bus(volatile void * address)
+{
+	return (unsigned long)address - PAGE_OFFSET;
+}
+
+static inline void * isa_bus_to_virt(unsigned long address)
+{
+	return (void *)(address + PAGE_OFFSET);
+}
+
+#define isa_page_to_bus page_to_phys
+
+/*
+ * However PCI ones are not necessarily 1:1 and therefore these interfaces
+ * are forbidden in portable PCI drivers.
+ *
+ * Allow them for x86 for legacy drivers, though.
+ */
+#define virt_to_bus virt_to_phys
+#define bus_to_virt phys_to_virt
+
+/*
+ * Change "struct page" to physical address.
+ */
+#define page_to_phys(page)	((dma_addr_t)page_to_pfn(page) << PAGE_SHIFT)
+
+extern void __iomem * __ioremap(phys_t offset, phys_t size, unsigned long flags);
+extern void __iounmap(const volatile void __iomem *addr);
+
+static inline void __iomem * __ioremap_mode(phys_t offset, unsigned long size,
+	unsigned long flags)
+{
+	void __iomem *addr = plat_ioremap(offset, size, flags);
+
+	if (addr)
+		return addr;
+
+#define __IS_LOW512(addr) (!((phys_t)(addr) & (phys_t) ~0x1fffffffULL))
+
+	if (cpu_has_64bit_addresses) {
+		u64 base = UNCAC_BASE;
+
+		/*
+		 * R10000 supports a 2 bit uncached attribute therefore
+		 * UNCAC_BASE may not equal IO_BASE.
+		 */
+		if (flags == _CACHE_UNCACHED)
+			base = (u64) IO_BASE;
+		return (void __iomem *) (unsigned long) (base + offset);
+	} else if (__builtin_constant_p(offset) &&
+		   __builtin_constant_p(size) && __builtin_constant_p(flags)) {
+		phys_t phys_addr, last_addr;
+
+		phys_addr = fixup_bigphys_addr(offset, size);
+
+		/* Don't allow wraparound or zero size. */
+		last_addr = phys_addr + size - 1;
+		if (!size || last_addr < phys_addr)
+			return NULL;
+
+		/*
+		 * Map uncached objects in the low 512MB of address
+		 * space using KSEG1.
+		 */
+		if (__IS_LOW512(phys_addr) && __IS_LOW512(last_addr) &&
+		    flags == _CACHE_UNCACHED)
+			return (void __iomem *)
+				(unsigned long)CKSEG1ADDR(phys_addr);
+	}
+
+	return __ioremap(offset, size, flags);
+
+#undef __IS_LOW512
+}
+
+/*
+ * ioremap     -   map bus memory into CPU space
+ * @offset:    bus address of the memory
+ * @size:      size of the resource to map
+ *
+ * ioremap performs a platform specific sequence of operations to
+ * make bus memory CPU accessible via the readb/readw/readl/writeb/
+ * writew/writel functions and the other mmio helpers. The returned
+ * address is not guaranteed to be usable directly as a virtual
+ * address.
+ */
+#define ioremap(offset, size)						\
+	__ioremap_mode((offset), (size), _CACHE_UNCACHED)
+
+/*
+ * ioremap_nocache     -   map bus memory into CPU space
+ * @offset:    bus address of the memory
+ * @size:      size of the resource to map
+ *
+ * ioremap_nocache performs a platform specific sequence of operations to
+ * make bus memory CPU accessible via the readb/readw/readl/writeb/
+ * writew/writel functions and the other mmio helpers. The returned
+ * address is not guaranteed to be usable directly as a virtual
+ * address.
+ *
+ * This version of ioremap ensures that the memory is marked uncachable
+ * on the CPU as well as honouring existing caching rules from things like
+ * the PCI bus. Note that there are other caches and buffers on many
+ * busses. In paticular driver authors should read up on PCI writes
+ *
+ * It's useful if some control registers are in such an area and
+ * write combining or read caching is not desirable:
+ */
+#define ioremap_nocache(offset, size)					\
+	__ioremap_mode((offset), (size), _CACHE_UNCACHED)
+
+/*
+ * ioremap_cachable -   map bus memory into CPU space
+ * @offset:         bus address of the memory
+ * @size:           size of the resource to map
+ *
+ * ioremap_nocache performs a platform specific sequence of operations to
+ * make bus memory CPU accessible via the readb/readw/readl/writeb/
+ * writew/writel functions and the other mmio helpers. The returned
+ * address is not guaranteed to be usable directly as a virtual
+ * address.
+ *
+ * This version of ioremap ensures that the memory is marked cachable by
+ * the CPU.  Also enables full write-combining.  Useful for some
+ * memory-like regions on I/O busses.
+ */
+#define ioremap_cachable(offset, size)					\
+	__ioremap_mode((offset), (size), _page_cachable_default)
+
+/*
+ * These two are MIPS specific ioremap variant.  ioremap_cacheable_cow
+ * requests a cachable mapping, ioremap_uncached_accelerated requests a
+ * mapping using the uncached accelerated mode which isn't supported on
+ * all processors.
+ */
+#define ioremap_cacheable_cow(offset, size)				\
+	__ioremap_mode((offset), (size), _CACHE_CACHABLE_COW)
+#define ioremap_uncached_accelerated(offset, size)			\
+	__ioremap_mode((offset), (size), _CACHE_UNCACHED_ACCELERATED)
+
+static inline void iounmap(const volatile void __iomem *addr)
+{
+	if (plat_iounmap(addr))
+		return;
+
+#define __IS_KSEG1(addr) (((unsigned long)(addr) & ~0x1fffffffUL) == CKSEG1)
+
+	if (cpu_has_64bit_addresses ||
+	    (__builtin_constant_p(addr) && __IS_KSEG1(addr)))
+		return;
+
+	__iounmap(addr);
+
+#undef __IS_KSEG1
+}
+
+#define __BUILD_MEMORY_SINGLE(pfx, bwlq, type, irq)			\
+									\
+static inline void pfx##write##bwlq(type val,				\
+				    volatile void __iomem *mem)		\
+{									\
+	volatile type *__mem;						\
+	type __val;							\
+									\
+	__mem = (void *)__swizzle_addr_##bwlq((unsigned long)(mem));	\
+									\
+	__val = pfx##ioswab##bwlq(__mem, val);				\
+									\
+	if (sizeof(type) != sizeof(u64) || sizeof(u64) == sizeof(long))	\
+		*__mem = __val;						\
+	else if (cpu_has_64bits) {					\
+		unsigned long __flags;					\
+		type __tmp;						\
+									\
+		if (irq)						\
+			local_irq_save(__flags);			\
+		__asm__ __volatile__(					\
+			".set	mips3"		"\t\t# __writeq""\n\t"	\
+			"dsll32	%L0, %L0, 0"			"\n\t"	\
+			"dsrl32	%L0, %L0, 0"			"\n\t"	\
+			"dsll32	%M0, %M0, 0"			"\n\t"	\
+			"or	%L0, %L0, %M0"			"\n\t"	\
+			"sd	%L0, %2"			"\n\t"	\
+			".set	mips0"				"\n"	\
+			: "=r" (__tmp)					\
+			: "0" (__val), "m" (*__mem));			\
+		if (irq)						\
+			local_irq_restore(__flags);			\
+	} else								\
+		BUG();							\
+}									\
+									\
+static inline type pfx##read##bwlq(const volatile void __iomem *mem)	\
+{									\
+	volatile type *__mem;						\
+	type __val;							\
+									\
+	__mem = (void *)__swizzle_addr_##bwlq((unsigned long)(mem));	\
+									\
+	if (sizeof(type) != sizeof(u64) || sizeof(u64) == sizeof(long))	\
+		__val = *__mem;						\
+	else if (cpu_has_64bits) {					\
+		unsigned long __flags;					\
+									\
+		if (irq)						\
+			local_irq_save(__flags);			\
+		__asm__ __volatile__(					\
+			".set	mips3"		"\t\t# __readq"	"\n\t"	\
+			"ld	%L0, %1"			"\n\t"	\
+			"dsra32	%M0, %L0, 0"			"\n\t"	\
+			"sll	%L0, %L0, 0"			"\n\t"	\
+			".set	mips0"				"\n"	\
+			: "=r" (__val)					\
+			: "m" (*__mem));				\
+		if (irq)						\
+			local_irq_restore(__flags);			\
+	} else {							\
+		__val = 0;						\
+		BUG();							\
+	}								\
+									\
+	return pfx##ioswab##bwlq(__mem, __val);				\
+}
+
+#define __BUILD_IOPORT_SINGLE(pfx, bwlq, type, p, slow)			\
+									\
+static inline void pfx##out##bwlq##p(type val, unsigned long port)	\
+{									\
+	volatile type *__addr;						\
+	type __val;							\
+									\
+	__addr = (void *)__swizzle_addr_##bwlq(mips_io_port_base + port); \
+									\
+	__val = pfx##ioswab##bwlq(__addr, val);				\
+									\
+	/* Really, we want this to be atomic */				\
+	BUILD_BUG_ON(sizeof(type) > sizeof(unsigned long));		\
+									\
+	*__addr = __val;						\
+	slow;								\
+}									\
+									\
+static inline type pfx##in##bwlq##p(unsigned long port)			\
+{									\
+	volatile type *__addr;						\
+	type __val;							\
+									\
+	__addr = (void *)__swizzle_addr_##bwlq(mips_io_port_base + port); \
+									\
+	BUILD_BUG_ON(sizeof(type) > sizeof(unsigned long));		\
+									\
+	__val = *__addr;						\
+	slow;								\
+									\
+	return pfx##ioswab##bwlq(__addr, __val);			\
+}
+
+#define __BUILD_MEMORY_PFX(bus, bwlq, type)				\
+									\
+__BUILD_MEMORY_SINGLE(bus, bwlq, type, 1)
+
+#define BUILDIO_MEM(bwlq, type)						\
+									\
+__BUILD_MEMORY_PFX(__raw_, bwlq, type)					\
+__BUILD_MEMORY_PFX(, bwlq, type)					\
+__BUILD_MEMORY_PFX(__mem_, bwlq, type)					\
+
+BUILDIO_MEM(b, u8)
+BUILDIO_MEM(w, u16)
+BUILDIO_MEM(l, u32)
+BUILDIO_MEM(q, u64)
+
+#define __BUILD_IOPORT_PFX(bus, bwlq, type)				\
+	__BUILD_IOPORT_SINGLE(bus, bwlq, type, ,)			\
+	__BUILD_IOPORT_SINGLE(bus, bwlq, type, _p, SLOW_DOWN_IO)
+
+#define BUILDIO_IOPORT(bwlq, type)					\
+	__BUILD_IOPORT_PFX(, bwlq, type)				\
+	__BUILD_IOPORT_PFX(__mem_, bwlq, type)
+
+BUILDIO_IOPORT(b, u8)
+BUILDIO_IOPORT(w, u16)
+BUILDIO_IOPORT(l, u32)
+#ifdef CONFIG_64BIT
+BUILDIO_IOPORT(q, u64)
+#endif
+
+#define __BUILDIO(bwlq, type)						\
+									\
+__BUILD_MEMORY_SINGLE(____raw_, bwlq, type, 0)
+
+__BUILDIO(q, u64)
+
+#define readb_relaxed			readb
+#define readw_relaxed			readw
+#define readl_relaxed			readl
+#define readq_relaxed			readq
+
+/*
+ * Some code tests for these symbols
+ */
+#define readq				readq
+#define writeq				writeq
+
+#define __BUILD_MEMORY_STRING(bwlq, type)				\
+									\
+static inline void writes##bwlq(volatile void __iomem *mem,		\
+				const void *addr, unsigned int count)	\
+{									\
+	const volatile type *__addr = addr;				\
+									\
+	while (count--) {						\
+		__mem_write##bwlq(*__addr, mem);			\
+		__addr++;						\
+	}								\
+}									\
+									\
+static inline void reads##bwlq(volatile void __iomem *mem, void *addr,	\
+			       unsigned int count)			\
+{									\
+	volatile type *__addr = addr;					\
+									\
+	while (count--) {						\
+		*__addr = __mem_read##bwlq(mem);			\
+		__addr++;						\
+	}								\
+}
+
+#define __BUILD_IOPORT_STRING(bwlq, type)				\
+									\
+static inline void outs##bwlq(unsigned long port, const void *addr,	\
+			      unsigned int count)			\
+{									\
+	const volatile type *__addr = addr;				\
+									\
+	while (count--) {						\
+		__mem_out##bwlq(*__addr, port);				\
+		__addr++;						\
+	}								\
+}									\
+									\
+static inline void ins##bwlq(unsigned long port, void *addr,		\
+			     unsigned int count)			\
+{									\
+	volatile type *__addr = addr;					\
+									\
+	while (count--) {						\
+		*__addr = __mem_in##bwlq(port);				\
+		__addr++;						\
+	}								\
+}
+
+#define BUILDSTRING(bwlq, type)						\
+									\
+__BUILD_MEMORY_STRING(bwlq, type)					\
+__BUILD_IOPORT_STRING(bwlq, type)
+
+BUILDSTRING(b, u8)
+BUILDSTRING(w, u16)
+BUILDSTRING(l, u32)
+#ifdef CONFIG_64BIT
+BUILDSTRING(q, u64)
+#endif
+
+
+/* Depends on MIPS II instruction set */
+#define mmiowb() asm volatile ("sync" ::: "memory")
+
+static inline void memset_io(volatile void __iomem *addr, unsigned char val, int count)
+{
+	memset((void __force *) addr, val, count);
+}
+static inline void memcpy_fromio(void *dst, const volatile void __iomem *src, int count)
+{
+	memcpy(dst, (void __force *) src, count);
+}
+static inline void memcpy_toio(volatile void __iomem *dst, const void *src, int count)
+{
+	memcpy((void __force *) dst, src, count);
+}
+
+/*
+ * The caches on some architectures aren't dma-coherent and have need to
+ * handle this in software.  There are three types of operations that
+ * can be applied to dma buffers.
+ *
+ *  - dma_cache_wback_inv(start, size) makes caches and coherent by
+ *    writing the content of the caches back to memory, if necessary.
+ *    The function also invalidates the affected part of the caches as
+ *    necessary before DMA transfers from outside to memory.
+ *  - dma_cache_wback(start, size) makes caches and coherent by
+ *    writing the content of the caches back to memory, if necessary.
+ *    The function also invalidates the affected part of the caches as
+ *    necessary before DMA transfers from outside to memory.
+ *  - dma_cache_inv(start, size) invalidates the affected parts of the
+ *    caches.  Dirty lines of the caches may be written back or simply
+ *    be discarded.  This operation is necessary before dma operations
+ *    to the memory.
+ *
+ * This API used to be exported; it now is for arch code internal use only.
+ */
+#ifdef CONFIG_DMA_NONCOHERENT
+
+extern void (*_dma_cache_wback_inv)(unsigned long start, unsigned long size);
+extern void (*_dma_cache_wback)(unsigned long start, unsigned long size);
+extern void (*_dma_cache_inv)(unsigned long start, unsigned long size);
+
+#define dma_cache_wback_inv(start, size)	_dma_cache_wback_inv(start, size)
+#define dma_cache_wback(start, size)		_dma_cache_wback(start, size)
+#define dma_cache_inv(start, size)		_dma_cache_inv(start, size)
+
+#else /* Sane hardware */
+
+#define dma_cache_wback_inv(start,size)	\
+	do { (void) (start); (void) (size); } while (0)
+#define dma_cache_wback(start,size)	\
+	do { (void) (start); (void) (size); } while (0)
+#define dma_cache_inv(start,size)	\
+	do { (void) (start); (void) (size); } while (0)
+
+#endif /* CONFIG_DMA_NONCOHERENT */
+
+/*
+ * Read a 32-bit register that requires a 64-bit read cycle on the bus.
+ * Avoid interrupt mucking, just adjust the address for 4-byte access.
+ * Assume the addresses are 8-byte aligned.
+ */
+#ifdef __MIPSEB__
+#define __CSR_32_ADJUST 4
+#else
+#define __CSR_32_ADJUST 0
+#endif
+
+#define csr_out32(v, a) (*(volatile u32 *)((unsigned long)(a) + __CSR_32_ADJUST) = (v))
+#define csr_in32(a)    (*(volatile u32 *)((unsigned long)(a) + __CSR_32_ADJUST))
+
+/*
+ * Convert a physical pointer to a virtual kernel pointer for /dev/mem
+ * access
+ */
+#define xlate_dev_mem_ptr(p)	__va(p)
+
+/*
+ * Convert a virtual cached pointer to an uncached pointer
+ */
+#define xlate_dev_kmem_ptr(p)	p
+
+#endif /* _ASM_IO_H */