Merge branch 'upstream' of git://ftp.linux-mips.org/pub/scm/upstream-linus

* 'upstream' of git://ftp.linux-mips.org/pub/scm/upstream-linus: (33 commits)
  [MIPS] Add missing backslashes to macro definitions.
  [MIPS] Death list of board support to be removed after 2.6.18.
  [MIPS] Remove BSD and Sys V compat data types.
  [MIPS] ioc3.h: Uses u8, so include <linux/types.h>.
  [MIPS] 74K: Assume it will also have an AR bit in config7
  [MIPS] Treat CPUs with AR bit as physically indexed.
  [MIPS] Oprofile: Support VSMP on 34K.
  [MIPS] MIPS32/MIPS64 S-cache fix and cleanup
  [MIPS] excite: PCI makefile needs to use += if it wants a chance to work.
  [MIPS] excite: plat_setup -> plat_mem_setup.
  [MIPS] au1xxx: export dbdma functions
  [MIPS] au1xxx: dbdma, no sleeping under spin_lock
  [MIPS] au1xxx: fix PSC_SMBTXRX_RSR.
  [MIPS] Early printk for IP27.
  [MIPS] Fix handling of 0 length I & D caches.
  [MIPS] Typo fixes.
  [MIPS] MIPS32/MIPS64 secondary cache management
  [MIPS] Fix FIXADDR_TOP for TX39/TX49.
  [MIPS] Remove first timer interrupt setup in wrppmc_timer_setup()
  [MIPS] Fix configuration of R2 CPU features and multithreading.
  ...

8 files changed, 17 insertions, 222 deletions

diff --git a/arch/mips/gt64120/common/Makefile b/arch/mips/gt64120/common/Makefile
index eba5051..1ef676e 100644
--- a/arch/mips/gt64120/common/Makefile
+++ b/arch/mips/gt64120/common/Makefile
@@ -3,4 +3,3 @@
 #
 
 obj-y	 		+= time.o
-obj-$(CONFIG_PCI)	+= pci.o
diff --git a/arch/mips/gt64120/common/pci.c b/arch/mips/gt64120/common/pci.c
deleted file mode 100644
index e9e5419..0000000
--- a/arch/mips/gt64120/common/pci.c
+++ /dev/null
@@ -1,147 +0,0 @@
-/*
- * BRIEF MODULE DESCRIPTION
- * Galileo Evaluation Boards PCI support.
- *
- * The general-purpose functions to read/write and configure the GT64120A's
- * PCI registers (function names start with pci0 or pci1) are either direct
- * copies of functions written by Galileo Technology, or are modifications
- * of their functions to work with Linux 2.4 vs Linux 2.2.  These functions
- * are Copyright - Galileo Technology.
- *
- * Other functions are derived from other MIPS PCI implementations, or were
- * written by RidgeRun, Inc,  Copyright (C) 2000 RidgeRun, Inc.
- *   glonnon@ridgerun.com, skranz@ridgerun.com, stevej@ridgerun.com
- *
- *  This program is free software; you can redistribute  it and/or modify it
- *  under  the terms of  the GNU General  Public License as published by the
- *  Free Software Foundation;  either version 2 of the  License, or (at your
- *  option) any later version.
- *
- *  THIS  SOFTWARE  IS PROVIDED   ``AS  IS'' AND   ANY  EXPRESS OR IMPLIED
- *  WARRANTIES,   INCLUDING, BUT NOT  LIMITED  TO, THE IMPLIED WARRANTIES OF
- *  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN
- *  NO  EVENT  SHALL   THE AUTHOR  BE    LIABLE FOR ANY   DIRECT, INDIRECT,
- *  INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
- *  NOT LIMITED   TO, PROCUREMENT OF  SUBSTITUTE GOODS  OR SERVICES; LOSS OF
- *  USE, DATA,  OR PROFITS; OR  BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
- *  ANY THEORY OF LIABILITY, WHETHER IN  CONTRACT, STRICT LIABILITY, OR TORT
- *  (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
- *  THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *
- *  You should have received a copy of the  GNU General Public License along
- *  with this program; if not, write  to the Free Software Foundation, Inc.,
- *  675 Mass Ave, Cambridge, MA 02139, USA.
- */
-#include <linux/init.h>
-#include <linux/types.h>
-#include <linux/pci.h>
-#include <linux/kernel.h>
-#include <asm/gt64120.h>
-
-#define SELF 0
-
-/*
- * pciXReadConfigReg  - Read from a PCI configuration register
- *                    - Make sure the GT is configured as a master before
- *                      reading from another device on the PCI.
- *                   - The function takes care of Big/Little endian conversion.
- * INPUTS:   regOffset: The register offset as it apears in the GT spec (or PCI
- *                        spec)
- *           pciDevNum: The device number needs to be addressed.
- * RETURNS: data , if the data == 0xffffffff check the master abort bit in the
- *                 cause register to make sure the data is valid
- *
- *  Configuration Address 0xCF8:
- *
- *       31 30    24 23  16 15  11 10     8 7      2  0     <=bit Number
- *  |congif|Reserved|  Bus |Device|Function|Register|00|
- *  |Enable|        |Number|Number| Number | Number |  |    <=field Name
- *
- */
-static unsigned int pci0ReadConfigReg(int offset, struct pci_dev *device)
-{
-	unsigned int DataForRegCf8;
-	unsigned int data;
-
-	DataForRegCf8 = ((PCI_SLOT(device->devfn) << 11) |
-			 (PCI_FUNC(device->devfn) << 8) |
-			 (offset & ~0x3)) | 0x80000000;
-	GT_WRITE(GT_PCI0_CFGADDR_OFS, DataForRegCf8);
-
-	/*
-	 * The casual observer might wonder why the READ is duplicated here,
-	 * rather than immediately following the WRITE, and just have the swap
-	 * in the "if".  That's because there is a latency problem with trying
-	 * to read immediately after setting up the address register.  The "if"
-	 * check gives enough time for the address to stabilize, so the READ
-	 * can work.
-	 */
-	if (PCI_SLOT(device->devfn) == SELF)	/* This board */
-		return GT_READ(GT_PCI0_CFGDATA_OFS);
-	else		/* PCI is little endian so swap the Data. */
-		return __GT_READ(GT_PCI0_CFGDATA_OFS);
-}
-
-/*
- * pciXWriteConfigReg - Write to a PCI configuration register
- *                    - Make sure the GT is configured as a master before
- *                      writingto another device on the PCI.
- *                    - The function takes care of Big/Little endian conversion.
- * Inputs:   unsigned int regOffset: The register offset as it apears in the
- *           GT spec
- *                   (or any other PCI device spec)
- *           pciDevNum: The device number needs to be addressed.
- *
- *  Configuration Address 0xCF8:
- *
- *       31 30    24 23  16 15  11 10     8 7      2  0     <=bit Number
- *  |congif|Reserved|  Bus |Device|Function|Register|00|
- *  |Enable|        |Number|Number| Number | Number |  |    <=field Name
- *
- */
-static void pci0WriteConfigReg(unsigned int offset,
-			       struct pci_dev *device, unsigned int data)
-{
-	unsigned int DataForRegCf8;
-
-	DataForRegCf8 = ((PCI_SLOT(device->devfn) << 11) |
-			 (PCI_FUNC(device->devfn) << 8) |
-			 (offset & ~0x3)) | 0x80000000;
-	GT_WRITE(GT_PCI0_CFGADDR_OFS, DataForRegCf8);
-
-	if (PCI_SLOT(device->devfn) == SELF) 	/* This board */
-		GT_WRITE(GT_PCI0_CFGDATA_OFS, data);
-	else 			/* configuration Transaction over the pci. */
-		__GT_WRITE(GT_PCI0_CFGDATA_OFS, data);
-}
-
-extern struct pci_ops gt64120_pci_ops;
-
-void __init pcibios_init(void)
-{
-	u32 tmp;
-	struct pci_dev controller;
-
-	controller.devfn = SELF;
-
-	tmp = GT_READ(GT_PCI0_CMD_OFS);		/* Huh??? -- Ralf  */
-	tmp = GT_READ(GT_PCI0_BARE_OFS);
-
-	/*
-	 * You have to enable bus mastering to configure any other
-	 * card on the bus.
-	 */
-	tmp = pci0ReadConfigReg(PCI_COMMAND, &controller);
-	tmp |= PCI_COMMAND_MEMORY | PCI_COMMAND_MASTER | PCI_COMMAND_SERR;
-	pci0WriteConfigReg(PCI_COMMAND, &controller, tmp);
-
-	/*
-	 *  Reset PCI I/O and PCI MEM values to ones supported by EVM.
-	 */
-	ioport_resource.start	= GT_PCI_IO_BASE;
-	ioport_resource.end	= GT_PCI_IO_BASE + GT_PCI_IO_SIZE - 1;
-	iomem_resource.start	= GT_PCI_MEM_BASE;
-	iomem_resource.end	= GT_PCI_MEM_BASE + GT_PCI_MEM_SIZE - 1;
-
-	pci_scan_bus(0, &gt64120_pci_ops, NULL);
-}
diff --git a/arch/mips/gt64120/momenco_ocelot/setup.c b/arch/mips/gt64120/momenco_ocelot/setup.c
index 1193a22..9804642 100644
--- a/arch/mips/gt64120/momenco_ocelot/setup.c
+++ b/arch/mips/gt64120/momenco_ocelot/setup.c
@@ -164,8 +164,8 @@ void __init plat_mem_setup(void)
 	pm_power_off = momenco_ocelot_power_off;
 
 	/*
-	 * initrd_start = (ulong)ocelot_initrd_start;
-	 * initrd_end = (ulong)ocelot_initrd_start + (ulong)ocelot_initrd_size;
+	 * initrd_start = (unsigned long)ocelot_initrd_start;
+	 * initrd_end = (unsigned long)ocelot_initrd_start + (ulong)ocelot_initrd_size;
 	 * initrd_below_start_ok = 1;
 	 */
 
diff --git a/arch/mips/gt64120/wrppmc/Makefile b/arch/mips/gt64120/wrppmc/Makefile
index 72606b9..7cf5220 100644
--- a/arch/mips/gt64120/wrppmc/Makefile
+++ b/arch/mips/gt64120/wrppmc/Makefile
@@ -9,6 +9,6 @@
 # Makefile for the Wind River MIPS 4KC PPMC Eval Board
 #
 
-obj-y	+= int-handler.o irq.o reset.o setup.o time.o pci.o
+obj-y += irq.o reset.o setup.o time.o pci.o
 
 EXTRA_AFLAGS := $(CFLAGS)
diff --git a/arch/mips/gt64120/wrppmc/int-handler.S b/arch/mips/gt64120/wrppmc/int-handler.S
deleted file mode 100644
index edee7b3..0000000
--- a/arch/mips/gt64120/wrppmc/int-handler.S
+++ /dev/null
@@ -1,59 +0,0 @@
-/*
- * This file is subject to the terms and conditions of the GNU General Public
- * License.  See the file "COPYING" in the main directory of this archive
- * for more details.
- *
- * Copyright (C) 1995, 1996, 1997, 2003 by Ralf Baechle
- * Copyright (C) Wind River System Inc. Rongkai.Zhan <rongkai.zhan@windriver.com>
- */
-#include <asm/asm.h>
-#include <asm/mipsregs.h>
-#include <asm/addrspace.h>
-#include <asm/regdef.h>
-#include <asm/stackframe.h>
-#include <asm/mach-wrppmc/mach-gt64120.h>
-
-	.align	5
-	.set	noat
-NESTED(handle_IRQ, PT_SIZE, sp)
-	SAVE_ALL
-	CLI				# Important: mark KERNEL mode !
-	.set	at
-
-	mfc0	t0, CP0_CAUSE		# get pending interrupts
-	mfc0	t1, CP0_STATUS		# get enabled interrupts
-	and	t0, t0, t1		# get allowed interrupts
-	andi	t0, t0, 0xFF00
-	beqz	t0, 1f
-	move	a1, sp			# Prepare 'struct pt_regs *regs' pointer
-
-	andi	t1, t0, CAUSEF_IP7	# CPU Compare/Count internal timer
-	bnez	t1, handle_cputimer_irq
-	andi	t1, t0, CAUSEF_IP6	# UART 16550 port
-	bnez	t1, handle_uart_irq
-	andi	t1, t0, CAUSEF_IP3	# PCI INT_A
-	bnez	t1, handle_pci_intA_irq
-
-	/* wrong alarm or masked ... */
-1:	j	spurious_interrupt
-	nop
-END(handle_IRQ)
-
-	.align	5
-handle_cputimer_irq:
-	li	a0, WRPPMC_MIPS_TIMER_IRQ
-	jal	do_IRQ
-	j	ret_from_irq
-
-	.align	5
-handle_uart_irq:
-	li	a0, WRPPMC_UART16550_IRQ
-	jal	do_IRQ
-	j	ret_from_irq
-
-	.align	5
-handle_pci_intA_irq:
-	li	a0, WRPPMC_PCI_INTA_IRQ
-	jal	do_IRQ
-	j	ret_from_irq
-
diff --git a/arch/mips/gt64120/wrppmc/irq.c b/arch/mips/gt64120/wrppmc/irq.c
index 8605687..8d75a43 100644
--- a/arch/mips/gt64120/wrppmc/irq.c
+++ b/arch/mips/gt64120/wrppmc/irq.c
@@ -30,7 +30,19 @@
 #include <asm/irq_cpu.h>
 #include <asm/gt64120.h>
 
-extern asmlinkage void handle_IRQ(void);
+asmlinkage void plat_irq_dispatch(struct pt_regs *regs)
+{
+	unsigned int pending = read_c0_status() & read_c0_cause();
+
+	if (pending & STATUSF_IP7)
+		do_IRQ(WRPPMC_MIPS_TIMER_IRQ, regs);	/* CPU Compare/Count internal timer */
+	else if (pending & STATUSF_IP6)
+		do_IRQ(WRPPMC_UART16550_IRQ, regs);	/* UART 16550 port */
+	else if (pending & STATUSF_IP3)
+		do_IRQ(WRPPMC_PCI_INTA_IRQ, regs);	/* PCI INT_A */
+	else
+		spurious_interrupt(regs);
+}
 
 /**
  * Initialize GT64120 Interrupt Controller
@@ -50,12 +62,6 @@ void gt64120_init_pic(void)
 
 void __init arch_init_irq(void)
 {
-	/* enable all CPU interrupt bits. */
-	set_c0_status(ST0_IM);	/* IE bit is still 0 */
-
-	/* Install MIPS Interrupt Trap Vector */
-	set_except_vector(0, handle_IRQ);
-
 	/* IRQ 0 - 7 are for MIPS common irq_cpu controller */
 	mips_cpu_irq_init(0);
 
diff --git a/arch/mips/gt64120/wrppmc/setup.c b/arch/mips/gt64120/wrppmc/setup.c
index 20c591e..2db6375 100644
--- a/arch/mips/gt64120/wrppmc/setup.c
+++ b/arch/mips/gt64120/wrppmc/setup.c
@@ -125,7 +125,7 @@ static void wrppmc_setup_serial(void)
 }
 #endif
 
-void __init plat_setup(void)
+void __init plat_mem_setup(void)
 {
 	extern void wrppmc_time_init(void);
 	extern void wrppmc_timer_setup(struct irqaction *);
diff --git a/arch/mips/gt64120/wrppmc/time.c b/arch/mips/gt64120/wrppmc/time.c
index 175d22a..6c24a82 100644
--- a/arch/mips/gt64120/wrppmc/time.c
+++ b/arch/mips/gt64120/wrppmc/time.c
@@ -31,10 +31,6 @@ void __init wrppmc_timer_setup(struct irqaction *irq)
 {
 	/* Install ISR for timer interrupt */
 	setup_irq(WRPPMC_MIPS_TIMER_IRQ, irq);
-
-	/* to generate the first timer interrupt */
-	write_c0_compare(mips_hpt_frequency/HZ);
-	write_c0_count(0);
 }
 
 /*