summaryrefslogtreecommitdiffstats
path: root/arch/mips/dec
diff options
context:
space:
mode:
authorMaciej W. Rozycki <macro@linux-mips.org>2015-04-03 23:32:08 +0100
committerRalf Baechle <ralf@linux-mips.org>2015-04-08 01:10:45 +0200
commitf02cf4691e19ab61d4415b2fbfeb64aa8a93757e (patch)
tree0fcde09a376f7fe5984aed2d9908592471156eea /arch/mips/dec
parent7aecd5ca80d1c08f882a5357ddae8c677c7fd1af (diff)
downloadop-kernel-dev-f02cf4691e19ab61d4415b2fbfeb64aa8a93757e.zip
op-kernel-dev-f02cf4691e19ab61d4415b2fbfeb64aa8a93757e.tar.gz
MIPS: DEC: Implement FPU interrupt counter
Implement a cheap way to count FPU interrupts for R2k/R3k DECstation systems. Do this manually in handcoded assembly, rather than calling `kstat_incr_irq_this_cpu' that would require setting up a stack frame and a lot of redirection. This is not going to be a problem because the FPU interrupt is local to the CPU and also there is one CPU only anyway. So at bootstrap determine the address of the correct location within `struct irq_desc', and then only refer to it directly in the interrupt handler. Signed-off-by: Maciej W. Rozycki <macro@linux-mips.org> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/9713/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Diffstat (limited to 'arch/mips/dec')
-rw-r--r--arch/mips/dec/int-handler.S7
-rw-r--r--arch/mips/dec/setup.c16
2 files changed, 19 insertions, 4 deletions
diff --git a/arch/mips/dec/int-handler.S b/arch/mips/dec/int-handler.S
index 41a2fa1..8c6f508 100644
--- a/arch/mips/dec/int-handler.S
+++ b/arch/mips/dec/int-handler.S
@@ -267,8 +267,13 @@ handle_it:
#ifdef CONFIG_32BIT
fpu:
+ lw t0,fpu_kstat_irq
+ nop
+ lw t1,(t0)
+ nop
+ addu t1,1
j handle_fpe_int
- nop
+ sw t1,(t0)
#endif
spurious:
diff --git a/arch/mips/dec/setup.c b/arch/mips/dec/setup.c
index 41bbffd..b4f83dd 100644
--- a/arch/mips/dec/setup.c
+++ b/arch/mips/dec/setup.c
@@ -12,13 +12,15 @@
#include <linux/init.h>
#include <linux/interrupt.h>
#include <linux/ioport.h>
+#include <linux/irq.h>
+#include <linux/irqnr.h>
#include <linux/module.h>
#include <linux/param.h>
+#include <linux/percpu-defs.h>
#include <linux/sched.h>
#include <linux/spinlock.h>
#include <linux/types.h>
#include <linux/pm.h>
-#include <linux/irq.h>
#include <asm/bootinfo.h>
#include <asm/cpu.h>
@@ -98,6 +100,7 @@ int_ptr asic_mask_nr_tbl[DEC_MAX_ASIC_INTS][2] = {
{ { .i = ~0 }, { .p = asic_intr_unimplemented } },
};
int cpu_fpu_mask = DEC_CPU_IRQ_MASK(DEC_CPU_INR_FPU);
+int *fpu_kstat_irq;
static struct irqaction ioirq = {
.handler = no_action,
@@ -755,8 +758,15 @@ void __init arch_init_irq(void)
dec_interrupt[DEC_IRQ_HALT] = -1;
/* Register board interrupts: FPU and cascade. */
- if (dec_interrupt[DEC_IRQ_FPU] >= 0)
- setup_irq(dec_interrupt[DEC_IRQ_FPU], &fpuirq);
+ if (dec_interrupt[DEC_IRQ_FPU] >= 0) {
+ struct irq_desc *desc_fpu;
+ int irq_fpu;
+
+ irq_fpu = dec_interrupt[DEC_IRQ_FPU];
+ setup_irq(irq_fpu, &fpuirq);
+ desc_fpu = irq_to_desc(irq_fpu);
+ fpu_kstat_irq = this_cpu_ptr(desc_fpu->kstat_irqs);
+ }
if (dec_interrupt[DEC_IRQ_CASCADE] >= 0)
setup_irq(dec_interrupt[DEC_IRQ_CASCADE], &ioirq);
OpenPOWER on IntegriCloud