summaryrefslogtreecommitdiffstats
path: root/arch/mips/bcm63xx
diff options
context:
space:
mode:
authorFlorian Fainelli <florian@openwrt.org>2011-11-16 19:11:12 +0100
committerRalf Baechle <ralf@linux-mips.org>2011-12-07 22:03:04 +0000
commite1c96c8620539f056291fe42f742f331f5d291b1 (patch)
treebcb161d447e8029bf8be300254afbbc9e63af7c6 /arch/mips/bcm63xx
parentd61fcfe2bbb27d4da18c609cf279627ae1b74151 (diff)
downloadop-kernel-dev-e1c96c8620539f056291fe42f742f331f5d291b1.zip
op-kernel-dev-e1c96c8620539f056291fe42f742f331f5d291b1.tar.gz
MIPS: BCM63xx: Remove BCM6345 hacks to read base boot address
Though BCM6345 does not technically have the same MPI register layout than the other SoCs, reading the chip-select registers is done the same way, and particularly for chip-select 0, which is the boot flash. Signed-off-by: Florian Fainelli <florian@openwrt.org> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/3009/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Diffstat (limited to 'arch/mips/bcm63xx')
-rw-r--r--arch/mips/bcm63xx/boards/board_bcm963xx.c21
1 files changed, 6 insertions, 15 deletions
diff --git a/arch/mips/bcm63xx/boards/board_bcm963xx.c b/arch/mips/bcm63xx/boards/board_bcm963xx.c
index 40b223b..ac948c2 100644
--- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
@@ -709,15 +709,9 @@ void __init board_prom_init(void)
char cfe_version[32];
u32 val;
- /* read base address of boot chip select (0)
- * 6345 does not have MPI but boots from standard
- * MIPS Flash address */
- if (BCMCPU_IS_6345())
- val = 0x1fc00000;
- else {
- val = bcm_mpi_readl(MPI_CSBASE_REG(0));
- val &= MPI_CSBASE_BASE_MASK;
- }
+ /* read base address of boot chip select (0) */
+ val = bcm_mpi_readl(MPI_CSBASE_REG(0));
+ val &= MPI_CSBASE_BASE_MASK;
boot_addr = (u8 *)KSEG1ADDR(val);
/* dump cfe version */
@@ -893,12 +887,9 @@ int __init board_register_devices(void)
bcm63xx_dsp_register(&board.dsp);
/* read base address of boot chip select (0) */
- if (BCMCPU_IS_6345())
- val = 0x1fc00000;
- else {
- val = bcm_mpi_readl(MPI_CSBASE_REG(0));
- val &= MPI_CSBASE_BASE_MASK;
- }
+ val = bcm_mpi_readl(MPI_CSBASE_REG(0));
+ val &= MPI_CSBASE_BASE_MASK;
+
mtd_resources[0].start = val;
mtd_resources[0].end = 0x1FFFFFFF;
OpenPOWER on IntegriCloud