MIPS: Alchemy: update core interrupt code.

This patch attempts to modernize core Alchemy interrupt handling code.

- add irq_chips for irq controllers instead of irq type,
- add a set_type() hook to change irq trigger type during runtime,
- add a set_wake() hook to control GPIO0..7 based wakeup,
- use linux' IRQF_TRIGGER_ constants instead of homebrew ones,
- enable GENERIC_HARDIRQS_NO__DO_IRQ.
- simplify plat_irq_dispatch
- merge au1xxx_irqmap into irq.c file, the only place where its
  contents are referenced.
- board_init_irq() is now mandatory for every board; use it to register
  the remaining (gpio-based) interrupt sources; update all boards
  accordingly.

Run-tested on Db1200 and other Au1200 based platforms.

Signed-off-by: Manuel Lauss <mano@roarinelk.homelinux.net>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

 delete mode 100644 arch/mips/alchemy/common/au1xxx_irqmap.c

7 files changed, 53 insertions, 39 deletions

diff --git a/arch/mips/alchemy/devboards/db1x00/irqmap.c b/arch/mips/alchemy/devboards/db1x00/irqmap.c
index 94c090e..0b09025 100644
--- a/arch/mips/alchemy/devboards/db1x00/irqmap.c
+++ b/arch/mips/alchemy/devboards/db1x00/irqmap.c
@@ -27,6 +27,7 @@
  */
 
 #include <linux/init.h>
+#include <linux/interrupt.h>
 
 #include <asm/mach-au1x00/au1000.h>
 
@@ -66,21 +67,24 @@ struct au1xxx_irqmap __initdata au1xxx_irq_map[] = {
 
 #ifndef CONFIG_MIPS_MIRAGE
 #ifdef CONFIG_MIPS_DB1550
-	{ AU1000_GPIO_3, INTC_INT_LOW_LEVEL, 0 }, /* PCMCIA Card 0 IRQ# */
-	{ AU1000_GPIO_5, INTC_INT_LOW_LEVEL, 0 }, /* PCMCIA Card 1 IRQ# */
+	{ AU1000_GPIO_3, IRQF_TRIGGER_LOW, 0 }, /* PCMCIA Card 0 IRQ# */
+	{ AU1000_GPIO_5, IRQF_TRIGGER_LOW, 0 }, /* PCMCIA Card 1 IRQ# */
 #else
-	{ AU1000_GPIO_0, INTC_INT_LOW_LEVEL, 0 }, /* PCMCIA Card 0 Fully_Interted# */
-	{ AU1000_GPIO_1, INTC_INT_LOW_LEVEL, 0 }, /* PCMCIA Card 0 STSCHG# */
-	{ AU1000_GPIO_2, INTC_INT_LOW_LEVEL, 0 }, /* PCMCIA Card 0 IRQ# */
+	{ AU1000_GPIO_0, IRQF_TRIGGER_LOW, 0 }, /* PCMCIA Card 0 Fully_Interted# */
+	{ AU1000_GPIO_1, IRQF_TRIGGER_LOW, 0 }, /* PCMCIA Card 0 STSCHG# */
+	{ AU1000_GPIO_2, IRQF_TRIGGER_LOW, 0 }, /* PCMCIA Card 0 IRQ# */
 
-	{ AU1000_GPIO_3, INTC_INT_LOW_LEVEL, 0 }, /* PCMCIA Card 1 Fully_Interted# */
-	{ AU1000_GPIO_4, INTC_INT_LOW_LEVEL, 0 }, /* PCMCIA Card 1 STSCHG# */
-	{ AU1000_GPIO_5, INTC_INT_LOW_LEVEL, 0 }, /* PCMCIA Card 1 IRQ# */
+	{ AU1000_GPIO_3, IRQF_TRIGGER_LOW, 0 }, /* PCMCIA Card 1 Fully_Interted# */
+	{ AU1000_GPIO_4, IRQF_TRIGGER_LOW, 0 }, /* PCMCIA Card 1 STSCHG# */
+	{ AU1000_GPIO_5, IRQF_TRIGGER_LOW, 0 }, /* PCMCIA Card 1 IRQ# */
 #endif
 #else
-	{ AU1000_GPIO_7, INTC_INT_RISE_EDGE, 0 }, /* touchscreen pen down */
+	{ AU1000_GPIO_7, IRQF_TRIGGER_RISING, 0 }, /* touchscreen pen down */
 #endif
 
 };
 
-int __initdata au1xxx_nr_irqs = ARRAY_SIZE(au1xxx_irq_map);
+void __init board_init_irq(void)
+{
+	au1xxx_setup_irqmap(au1xxx_irq_map, ARRAY_SIZE(au1xxx_irq_map));
+}
diff --git a/arch/mips/alchemy/devboards/pb1000/board_setup.c b/arch/mips/alchemy/devboards/pb1000/board_setup.c
index 889c8fd..aed2fde 100644
--- a/arch/mips/alchemy/devboards/pb1000/board_setup.c
+++ b/arch/mips/alchemy/devboards/pb1000/board_setup.c
@@ -32,11 +32,9 @@
 
 
 struct au1xxx_irqmap __initdata au1xxx_irq_map[] = {
-	{ AU1000_GPIO_15, INTC_INT_LOW_LEVEL, 0 },
+	{ AU1000_GPIO_15, IRQF_TRIGGER_LOW, 0 },
 };
 
-int __initdata au1xxx_nr_irqs = ARRAY_SIZE(au1xxx_irq_map);
-
 
 const char *get_system_type(void)
 {
@@ -47,6 +45,11 @@ void board_reset(void)
 {
 }
 
+void __init board_init_irq(void)
+{
+	au1xxx_setup_irqmap(au1xxx_irq_map, ARRAY_SIZE(au1xxx_irq_map));
+}
+
 void __init board_setup(void)
 {
 	u32 pin_func, static_cfg0;
diff --git a/arch/mips/alchemy/devboards/pb1100/board_setup.c b/arch/mips/alchemy/devboards/pb1100/board_setup.c
index fbd211e..4df57fa 100644
--- a/arch/mips/alchemy/devboards/pb1100/board_setup.c
+++ b/arch/mips/alchemy/devboards/pb1100/board_setup.c
@@ -25,6 +25,7 @@
 
 #include <linux/init.h>
 #include <linux/delay.h>
+#include <linux/interrupt.h>
 
 #include <asm/mach-au1x00/au1000.h>
 #include <asm/mach-pb1x00/pb1100.h>
@@ -33,14 +34,12 @@
 
 
 struct au1xxx_irqmap __initdata au1xxx_irq_map[] = {
-	{ AU1000_GPIO_9,  INTC_INT_LOW_LEVEL, 0 }, /* PCMCIA Card Fully_Inserted# */
-	{ AU1000_GPIO_10, INTC_INT_LOW_LEVEL, 0 }, /* PCMCIA Card STSCHG# */
-	{ AU1000_GPIO_11, INTC_INT_LOW_LEVEL, 0 }, /* PCMCIA Card IRQ# */
-	{ AU1000_GPIO_13, INTC_INT_LOW_LEVEL, 0 }, /* DC_IRQ# */
+	{ AU1000_GPIO_9,  IRQF_TRIGGER_LOW, 0 }, /* PCMCIA Card Fully_Inserted# */
+	{ AU1000_GPIO_10, IRQF_TRIGGER_LOW, 0 }, /* PCMCIA Card STSCHG# */
+	{ AU1000_GPIO_11, IRQF_TRIGGER_LOW, 0 }, /* PCMCIA Card IRQ# */
+	{ AU1000_GPIO_13, IRQF_TRIGGER_LOW, 0 }, /* DC_IRQ# */
 };
 
-int __initdata au1xxx_nr_irqs = ARRAY_SIZE(au1xxx_irq_map);
-
 
 const char *get_system_type(void)
 {
@@ -53,6 +52,11 @@ void board_reset(void)
 	au_writel(0x00000000, PB1100_RST_VDDI);
 }
 
+void __init board_init_irq(void)
+{
+	au1xxx_setup_irqmap(au1xxx_irq_map, ARRAY_SIZE(au1xxx_irq_map));
+}
+
 void __init board_setup(void)
 {
 	volatile void __iomem *base = (volatile void __iomem *)0xac000000UL;
diff --git a/arch/mips/alchemy/devboards/pb1200/board_setup.c b/arch/mips/alchemy/devboards/pb1200/board_setup.c
index b5585e4..94e6b7e 100644
--- a/arch/mips/alchemy/devboards/pb1200/board_setup.c
+++ b/arch/mips/alchemy/devboards/pb1200/board_setup.c
@@ -30,8 +30,6 @@
 #include <prom.h>
 #include <au1xxx.h>
 
-extern void _board_init_irq(void);
-extern void (*board_init_irq)(void);
 
 const char *get_system_type(void)
 {
@@ -131,9 +129,6 @@ void __init board_setup(void)
 #ifdef CONFIG_MIPS_DB1200
 	printk(KERN_INFO "AMD Alchemy Db1200 Board\n");
 #endif
-
-	/* Setup Pb1200 External Interrupt Controller */
-	board_init_irq = _board_init_irq;
 }
 
 int board_au1200fb_panel(void)
diff --git a/arch/mips/alchemy/devboards/pb1200/irqmap.c b/arch/mips/alchemy/devboards/pb1200/irqmap.c
index 2a505ad..1f92fec 100644
--- a/arch/mips/alchemy/devboards/pb1200/irqmap.c
+++ b/arch/mips/alchemy/devboards/pb1200/irqmap.c
@@ -40,10 +40,9 @@
 
 struct au1xxx_irqmap __initdata au1xxx_irq_map[] = {
 	/* This is external interrupt cascade */
-	{ AU1000_GPIO_7, INTC_INT_LOW_LEVEL, 0 },
+	{ AU1000_GPIO_7, IRQF_TRIGGER_LOW, 0 },
 };
 
-int __initdata au1xxx_nr_irqs = ARRAY_SIZE(au1xxx_irq_map);
 
 /*
  * Support for External interrupts on the Pb1200 Development platform.
@@ -121,10 +120,12 @@ static struct irq_chip external_irq_type = {
 	.unmask   = pb1200_enable_irq,
 };
 
-void _board_init_irq(void)
+void __init board_init_irq(void)
 {
 	unsigned int irq;
 
+	au1xxx_setup_irqmap(au1xxx_irq_map, ARRAY_SIZE(au1xxx_irq_map));
+
 #ifdef CONFIG_MIPS_PB1200
 	/* We have a problem with CPLD rev 3. */
 	if (((bcsr->whoami & BCSR_WHOAMI_CPLD) >> 4) <= 3) {
diff --git a/arch/mips/alchemy/devboards/pb1500/board_setup.c b/arch/mips/alchemy/devboards/pb1500/board_setup.c
index dcb36a6..fed3b09 100644
--- a/arch/mips/alchemy/devboards/pb1500/board_setup.c
+++ b/arch/mips/alchemy/devboards/pb1500/board_setup.c
@@ -25,6 +25,7 @@
 
 #include <linux/init.h>
 #include <linux/delay.h>
+#include <linux/interrupt.h>
 
 #include <asm/mach-au1x00/au1000.h>
 #include <asm/mach-pb1x00/pb1500.h>
@@ -38,15 +39,13 @@ char irq_tab_alchemy[][5] __initdata = {
 };
 
 struct au1xxx_irqmap __initdata au1xxx_irq_map[] = {
-	{ AU1500_GPIO_204, INTC_INT_HIGH_LEVEL, 0 },
-	{ AU1500_GPIO_201, INTC_INT_LOW_LEVEL, 0 },
-	{ AU1500_GPIO_202, INTC_INT_LOW_LEVEL, 0 },
-	{ AU1500_GPIO_203, INTC_INT_LOW_LEVEL, 0 },
-	{ AU1500_GPIO_205, INTC_INT_LOW_LEVEL, 0 },
+	{ AU1500_GPIO_204, IRQF_TRIGGER_HIGH, 0 },
+	{ AU1500_GPIO_201, IRQF_TRIGGER_LOW, 0 },
+	{ AU1500_GPIO_202, IRQF_TRIGGER_LOW, 0 },
+	{ AU1500_GPIO_203, IRQF_TRIGGER_LOW, 0 },
+	{ AU1500_GPIO_205, IRQF_TRIGGER_LOW, 0 },
 };
 
-int __initdata au1xxx_nr_irqs = ARRAY_SIZE(au1xxx_irq_map);
-
 
 const char *get_system_type(void)
 {
@@ -59,6 +58,11 @@ void board_reset(void)
 	au_writel(0x00000000, PB1500_RST_VDDI);
 }
 
+void __init board_init_irq(void)
+{
+	au1xxx_setup_irqmap(au1xxx_irq_map, ARRAY_SIZE(au1xxx_irq_map));
+}
+
 void __init board_setup(void)
 {
 	u32 pin_func;
diff --git a/arch/mips/alchemy/devboards/pb1550/board_setup.c b/arch/mips/alchemy/devboards/pb1550/board_setup.c
index f462652..b6e9e7d 100644
--- a/arch/mips/alchemy/devboards/pb1550/board_setup.c
+++ b/arch/mips/alchemy/devboards/pb1550/board_setup.c
@@ -28,6 +28,7 @@
  */
 
 #include <linux/init.h>
+#include <linux/interrupt.h>
 
 #include <asm/mach-au1x00/au1000.h>
 #include <asm/mach-pb1x00/pb1550.h>
@@ -41,13 +42,10 @@ char irq_tab_alchemy[][5] __initdata = {
 };
 
 struct au1xxx_irqmap __initdata au1xxx_irq_map[] = {
-	{ AU1000_GPIO_0, INTC_INT_LOW_LEVEL, 0 },
-	{ AU1000_GPIO_1, INTC_INT_LOW_LEVEL, 0 },
+	{ AU1000_GPIO_0, IRQF_TRIGGER_LOW, 0 },
+	{ AU1000_GPIO_1, IRQF_TRIGGER_LOW, 0 },
 };
 
-int __initdata au1xxx_nr_irqs = ARRAY_SIZE(au1xxx_irq_map);
-
-
 const char *get_system_type(void)
 {
 	return "Alchemy Pb1550";
@@ -59,6 +57,11 @@ void board_reset(void)
 	au_writew(au_readw(0xAF00001C) & ~BCSR_SYSTEM_RESET, 0xAF00001C);
 }
 
+void __init board_init_irq(void)
+{
+	au1xxx_setup_irqmap(au1xxx_irq_map, ARRAY_SIZE(au1xxx_irq_map));
+}
+
 void __init board_setup(void)
 {
 	u32 pin_func;