Merge branch 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus

Pull MIPS updates from Ralf Baechle:
 "This is the main pull request for MIPS for Linux 4.1.  Most
  noteworthy:

   - Add more Octeon-optimized crypto functions
   - Octeon crypto preemption and locking fixes
   - Little endian support for Octeon
   - Use correct CSR to soft reset Octeons
   - Support LEDs on the Octeon-based DSR-1000N
   - Fix PCI interrupt mapping for the Octeon-based DSR-1000N
   - Mark prom_free_prom_memory() as __init for a number of systems
   - Support for Imagination's Pistachio SOC.  This includes arch and
     CLK bits.  I'd like to merge pinctrl bits later
   - Improve parallelism of csum_partial for certain pipelines
   - Organize DTB files in subdirs like other architectures
   - Implement read_sched_clock for all MIPS platforms other than
     Octeon
   - Massive series of 38 fixes and cleanups for the FPU emulator /
     kernel
   - Further FPU remulator work to support new features.  This sits on a
     separate branch which also has been pulled into the 4.1 KVM branch
   - Clean up and fixes for the SEAD3 eval board; remove unused file
   - Various updates for Netlogic platforms
   - A number of small updates for Loongson 3 platforms
   - Increase the memory limit for ATH79 platforms to 256MB
   - A fair number of fixes and updates for BCM47xx platforms
   - Finish the implementation of XPA support
   - MIPS FDC support.  No, not floppy controller but Fast Debug Channel :)
   - Detect the R16000 used in SGI legacy platforms
   - Fix Kconfig dependencies for the SSB bus support"

* 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus: (265 commits)
  MIPS: Makefile: Fix MIPS ASE detection code
  MIPS: asm: elf: Set O32 default FPU flags
  MIPS: BCM47XX: Fix detecting Microsoft MN-700 & Asus WL500G
  MIPS: Kconfig: Disable SMP/CPS for 64-bit
  MIPS: Hibernate: flush TLB entries earlier
  MIPS: smp-cps: cpu_set FPU mask if FPU present
  MIPS: lose_fpu(): Disable FPU when MSA enabled
  MIPS: ralink: add missing symbol for RALINK_ILL_ACC
  MIPS: ralink: Fix bad config symbol in PCI makefile.
  SSB: fix Kconfig dependencies
  MIPS: Malta: Detect and fix bad memsize values
  Revert "MIPS: Avoid pipeline stalls on some MIPS32R2 cores."
  MIPS: Octeon: Delete override of cpu_has_mips_r2_exec_hazard.
  MIPS: Fix cpu_has_mips_r2_exec_hazard.
  MIPS: kernel: entry.S: Set correct ISA level for mips_ihb
  MIPS: asm: spinlock: Fix addiu instruction for R10000_LLSC_WAR case
  MIPS: r4kcache: Use correct base register for MIPS R6 cache flushes
  MIPS: Kconfig: Fix typo for the r2-to-r6 emulator kernel parameter
  MIPS: unaligned: Fix regular load/store instruction emulation for EVA
  MIPS: unaligned: Surround load/store macros in do {} while statements
  ...

1 files changed, 98 insertions, 18 deletions

diff --git a/arch/mips/Kconfig b/arch/mips/Kconfig
index a326c4c..2198837 100644
--- a/arch/mips/Kconfig
+++ b/arch/mips/Kconfig
@@ -43,6 +43,7 @@ config MIPS
 	select GENERIC_SMP_IDLE_THREAD
 	select BUILDTIME_EXTABLE_SORT
 	select GENERIC_CLOCKEVENTS
+	select GENERIC_SCHED_CLOCK if !CAVIUM_OCTEON_SOC
 	select GENERIC_CMOS_UPDATE
 	select HAVE_MOD_ARCH_SPECIFIC
 	select VIRT_TO_BUS
@@ -55,6 +56,8 @@ config MIPS
 	select ARCH_HAS_TICK_BROADCAST if GENERIC_CLOCKEVENTS_BROADCAST
 	select ARCH_BINFMT_ELF_STATE
 	select SYSCTL_EXCEPTION_TRACE
+	select HAVE_VIRT_CPU_ACCOUNTING_GEN
+	select HAVE_IRQ_TIME_ACCOUNTING
 
 menu "Machine selection"
 
@@ -131,8 +134,8 @@ config ATH79
 	help
 	  Support for the Atheros AR71XX/AR724X/AR913X SoCs.
 
-config BCM3384
-	bool "Broadcom BCM3384 based boards"
+config BMIPS_GENERIC
+	bool "Broadcom Generic BMIPS kernel"
 	select BOOT_RAW
 	select NO_EXCEPT_FILL
 	select USE_OF
@@ -140,22 +143,30 @@ config BCM3384
 	select CSRC_R4K
 	select SYNC_R4K
 	select COMMON_CLK
-	select DMA_NONCOHERENT
+	select BCM7038_L1_IRQ
+	select BCM7120_L2_IRQ
+	select BRCMSTB_L2_IRQ
 	select IRQ_CPU
+	select RAW_IRQ_ACCESSORS
+	select DMA_NONCOHERENT
 	select SYS_SUPPORTS_32BIT_KERNEL
+	select SYS_SUPPORTS_LITTLE_ENDIAN
 	select SYS_SUPPORTS_BIG_ENDIAN
 	select SYS_SUPPORTS_HIGHMEM
+	select SYS_HAS_CPU_BMIPS32_3300
+	select SYS_HAS_CPU_BMIPS4350
+	select SYS_HAS_CPU_BMIPS4380
 	select SYS_HAS_CPU_BMIPS5000
 	select SWAP_IO_SPACE
-	select USB_EHCI_BIG_ENDIAN_DESC
-	select USB_EHCI_BIG_ENDIAN_MMIO
-	select USB_OHCI_BIG_ENDIAN_DESC
-	select USB_OHCI_BIG_ENDIAN_MMIO
+	select USB_EHCI_BIG_ENDIAN_DESC if CPU_BIG_ENDIAN
+	select USB_EHCI_BIG_ENDIAN_MMIO if CPU_BIG_ENDIAN
+	select USB_OHCI_BIG_ENDIAN_DESC if CPU_BIG_ENDIAN
+	select USB_OHCI_BIG_ENDIAN_MMIO if CPU_BIG_ENDIAN
 	help
-	  Support for BCM3384 based boards.  BCM3384/BCM33843 is a cable modem
-	  chipset with a Linux application processor that is often used to
-	  provide Samba services, a CUPS print server, and/or advanced routing
-	  features.
+	  Build a generic DT-based kernel image that boots on select
+	  BCM33xx cable modem chips, BCM63xx DSL chips, and BCM7xxx set-top
+	  box chips.  Note that CONFIG_CPU_BIG_ENDIAN/CONFIG_CPU_LITTLE_ENDIAN
+	  must be set appropriately for your board.
 
 config BCM47XX
 	bool "Broadcom BCM47XX based boards"
@@ -352,6 +363,33 @@ config MACH_LOONGSON1
 	  the ICT (Institute of Computing Technology) and the Chinese Academy
 	  of Sciences.
 
+config MACH_PISTACHIO
+	bool "IMG Pistachio SoC based boards"
+	select ARCH_REQUIRE_GPIOLIB
+	select BOOT_ELF32
+	select BOOT_RAW
+	select CEVT_R4K
+	select CLKSRC_MIPS_GIC
+	select COMMON_CLK
+	select CSRC_R4K
+	select DMA_MAYBE_COHERENT
+	select IRQ_CPU
+	select LIBFDT
+	select MFD_SYSCON
+	select MIPS_CPU_SCACHE
+	select MIPS_GIC
+	select PINCTRL
+	select REGULATOR
+	select SYS_HAS_CPU_MIPS32_R2
+	select SYS_SUPPORTS_32BIT_KERNEL
+	select SYS_SUPPORTS_LITTLE_ENDIAN
+	select SYS_SUPPORTS_MIPS_CPS
+	select SYS_SUPPORTS_MULTITHREADING
+	select SYS_SUPPORTS_ZBOOT
+	select USE_OF
+	help
+	  This enables support for the IMG Pistachio SoC platform.
+
 config MIPS_MALTA
 	bool "MIPS Malta board"
 	select ARCH_MAY_HAVE_PC_FDC
@@ -377,6 +415,7 @@ config MIPS_MALTA
 	select SYS_HAS_CPU_MIPS32_R1
 	select SYS_HAS_CPU_MIPS32_R2
 	select SYS_HAS_CPU_MIPS32_R3_5
+	select SYS_HAS_CPU_MIPS32_R5
 	select SYS_HAS_CPU_MIPS32_R6
 	select SYS_HAS_CPU_MIPS64_R1
 	select SYS_HAS_CPU_MIPS64_R2
@@ -386,6 +425,7 @@ config MIPS_MALTA
 	select SYS_SUPPORTS_32BIT_KERNEL
 	select SYS_SUPPORTS_64BIT_KERNEL
 	select SYS_SUPPORTS_BIG_ENDIAN
+	select SYS_SUPPORTS_HIGHMEM
 	select SYS_SUPPORTS_LITTLE_ENDIAN
 	select SYS_SUPPORTS_MICROMIPS
 	select SYS_SUPPORTS_MIPS_CMP
@@ -779,7 +819,8 @@ config CAVIUM_OCTEON_SOC
 	select SYS_SUPPORTS_64BIT_KERNEL
 	select SYS_SUPPORTS_BIG_ENDIAN
 	select EDAC_SUPPORT
-	select SYS_SUPPORTS_HOTPLUG_CPU
+	select SYS_SUPPORTS_LITTLE_ENDIAN
+	select SYS_SUPPORTS_HOTPLUG_CPU if CPU_BIG_ENDIAN
 	select SYS_HAS_EARLY_PRINTK
 	select SYS_HAS_CPU_CAVIUM_OCTEON
 	select SWAP_IO_SPACE
@@ -793,6 +834,7 @@ config CAVIUM_OCTEON_SOC
 	select SYS_SUPPORTS_SMP
 	select NR_CPUS_DEFAULT_16
 	select BUILTIN_DTB
+	select MTD_COMPLEX_MAPPINGS
 	help
 	  This option supports all of the Octeon reference boards from Cavium
 	  Networks. It builds a kernel that dynamically determines the Octeon
@@ -887,6 +929,7 @@ source "arch/mips/ath25/Kconfig"
 source "arch/mips/ath79/Kconfig"
 source "arch/mips/bcm47xx/Kconfig"
 source "arch/mips/bcm63xx/Kconfig"
+source "arch/mips/bmips/Kconfig"
 source "arch/mips/jazz/Kconfig"
 source "arch/mips/jz4740/Kconfig"
 source "arch/mips/lantiq/Kconfig"
@@ -1202,10 +1245,10 @@ config MIPS_L1_CACHE_SHIFT_7
 
 config MIPS_L1_CACHE_SHIFT
 	int
-	default "4" if MIPS_L1_CACHE_SHIFT_4
-	default "5" if MIPS_L1_CACHE_SHIFT_5
-	default "6" if MIPS_L1_CACHE_SHIFT_6
 	default "7" if MIPS_L1_CACHE_SHIFT_7
+	default "6" if MIPS_L1_CACHE_SHIFT_6
+	default "5" if MIPS_L1_CACHE_SHIFT_5
+	default "4" if MIPS_L1_CACHE_SHIFT_4
 	default "5"
 
 config HAVE_STD_PC_SERIAL_PORT
@@ -1572,6 +1615,7 @@ config CPU_XLP
 	select WEAK_REORDERING_BEYOND_LLSC
 	select CPU_HAS_PREFETCH
 	select CPU_MIPSR2
+	select CPU_SUPPORTS_HUGEPAGES
 	help
 	  Netlogic Microsystems XLP processors.
 endchoice
@@ -1596,6 +1640,33 @@ config CPU_MIPS32_3_5_EVA
 	  One of its primary benefits is an increase in the maximum size
 	  of lowmem (up to 3GB). If unsure, say 'N' here.
 
+config CPU_MIPS32_R5_FEATURES
+	bool "MIPS32 Release 5 Features"
+	depends on SYS_HAS_CPU_MIPS32_R5
+	depends on CPU_MIPS32_R2
+	help
+	  Choose this option to build a kernel for release 2 or later of the
+	  MIPS32 architecture including features from release 5 such as
+	  support for Extended Physical Addressing (XPA).
+
+config CPU_MIPS32_R5_XPA
+	bool "Extended Physical Addressing (XPA)"
+	depends on CPU_MIPS32_R5_FEATURES
+	depends on !EVA
+	depends on !PAGE_SIZE_4KB
+	depends on SYS_SUPPORTS_HIGHMEM
+	select XPA
+	select HIGHMEM
+	select ARCH_PHYS_ADDR_T_64BIT
+	default n
+	help
+	  Choose this option if you want to enable the Extended Physical
+	  Addressing (XPA) on your MIPS32 core (such as P5600 series). The
+	  benefit is to increase physical addressing equal to or greater
+	  than 40 bits. Note that this has the side effect of turning on
+	  64-bit addressing which in turn makes the PTEs 64-bit in size.
+	  If unsure, say 'N' here.
+
 if CPU_LOONGSON2F
 config CPU_NOP_WORKAROUNDS
 	bool
@@ -1699,6 +1770,9 @@ config SYS_HAS_CPU_MIPS32_R2
 config SYS_HAS_CPU_MIPS32_R3_5
 	bool
 
+config SYS_HAS_CPU_MIPS32_R5
+	bool
+
 config SYS_HAS_CPU_MIPS32_R6
 	bool
 
@@ -1836,6 +1910,9 @@ config CPU_MIPSR6
 config EVA
 	bool
 
+config XPA
+	bool
+
 config SYS_SUPPORTS_32BIT_KERNEL
 	bool
 config SYS_SUPPORTS_64BIT_KERNEL
@@ -2072,7 +2149,7 @@ config MIPSR2_TO_R6_EMULATOR
 	help
 	  Choose this option if you want to run non-R6 MIPS userland code.
 	  Even if you say 'Y' here, the emulator will still be disabled by
-	  default. You can enable it using the 'mipsr2emul' kernel option.
+	  default. You can enable it using the 'mipsr2emu' kernel option.
 	  The only reason this is a build-time option is to save ~14K from the
 	  final kernel image.
 comment "MIPS R2-to-R6 emulator is only available for UP kernels"
@@ -2142,7 +2219,7 @@ config MIPS_CMP
 
 config MIPS_CPS
 	bool "MIPS Coherent Processing System support"
-	depends on SYS_SUPPORTS_MIPS_CPS
+	depends on SYS_SUPPORTS_MIPS_CPS && !64BIT
 	select MIPS_CM
 	select MIPS_CPC
 	select MIPS_CPS_PM if HOTPLUG_CPU
@@ -2348,7 +2425,7 @@ config NODES_SHIFT
 
 config HW_PERF_EVENTS
 	bool "Enable hardware performance counter support for perf events"
-	depends on PERF_EVENTS && OPROFILE=n && (CPU_MIPS32 || CPU_MIPS64 || CPU_R10000 || CPU_SB1 || CPU_CAVIUM_OCTEON || CPU_XLP)
+	depends on PERF_EVENTS && OPROFILE=n && (CPU_MIPS32 || CPU_MIPS64 || CPU_R10000 || CPU_SB1 || CPU_CAVIUM_OCTEON || CPU_XLP || CPU_LOONGSON3)
 	default y
 	help
 	  Enable hardware performance counter support for perf events. If
@@ -2500,6 +2577,9 @@ config HZ
 	default 1000 if HZ_1000
 	default 1024 if HZ_1024
 
+config SCHED_HRTICK
+	def_bool HIGH_RES_TIMERS
+
 source "kernel/Kconfig.preempt"
 
 config KEXEC