summaryrefslogtreecommitdiffstats
path: root/arch/microblaze
diff options
context:
space:
mode:
authorJohn Williams <john.williams@petalogix.com>2009-08-24 13:52:32 +1000
committerMichal Simek <monstr@monstr.eu>2009-12-14 08:45:00 +0100
commit3e78e4e5eaf6a85b8cdcc880bb46c1e4b4b79cc2 (patch)
tree213361bbc1c061969dce5b80735a3b74fb77536a /arch/microblaze
parenta1f55113ca2130f775eeebe799a401619bfd0295 (diff)
downloadop-kernel-dev-3e78e4e5eaf6a85b8cdcc880bb46c1e4b4b79cc2.zip
op-kernel-dev-3e78e4e5eaf6a85b8cdcc880bb46c1e4b4b79cc2.tar.gz
microblaze: Remove the buggy ALLOW_EDIT_AUTO config option
This was intended to allow manual override of CPU settings copied automatically to Kconfig.auto, however it's problematic for several reasons, but mostly: * If the defconfig doesn't have ALLOW_EDIT_AUTO=y, then it's impossible for that defconfig to iverride the values in the kernel source tree. This leads to very strange errors where the kernel is compiled with the wrong CPUFLAGS. Next patch in the series will back out the default in Kconfig.auto to baseline settings, so a kernel built with no default values will at least boot on any hardware, just not make use of additional CPU features. Signed-off-by: John Williams <john.williams@petalogix.com> Signed-off-by: Michal Simek <monstr@monstr.eu>
Diffstat (limited to 'arch/microblaze')
-rw-r--r--arch/microblaze/platform/Kconfig.platform19
-rw-r--r--arch/microblaze/platform/generic/Kconfig.auto17
2 files changed, 8 insertions, 28 deletions
diff --git a/arch/microblaze/platform/Kconfig.platform b/arch/microblaze/platform/Kconfig.platform
index 8e9b475..28e418a 100644
--- a/arch/microblaze/platform/Kconfig.platform
+++ b/arch/microblaze/platform/Kconfig.platform
@@ -59,25 +59,6 @@ config OPT_LIB_ASM
Allows turn on optimalized library function (memcpy and memmove).
Function are written in asm code.
-# This is still a bit broken - disabling for now JW 20070504
-config ALLOW_EDIT_AUTO
- bool "Permit Display/edit of Kconfig.auto platform settings"
- default n
- help
- Allows the editing of auto-generated platform settings from
- the Kconfig.auto file. Obviously this does not change the
- underlying hardware, so be very careful if you go editing
- these settings.
-
- Also, if you enable this, and edit various Kconfig.auto
- settings, YOUR CHANGES WILL BE LOST if you then disable it
- again. You have been warned!
-
- If unsure, say no.
-
-comment "Automatic platform settings from Kconfig.auto"
- depends on ALLOW_EDIT_AUTO
-
if PLATFORM_GENERIC=y
source "arch/microblaze/platform/generic/Kconfig.auto"
endif
diff --git a/arch/microblaze/platform/generic/Kconfig.auto b/arch/microblaze/platform/generic/Kconfig.auto
index fbca22d..1eaa49e 100644
--- a/arch/microblaze/platform/generic/Kconfig.auto
+++ b/arch/microblaze/platform/generic/Kconfig.auto
@@ -21,7 +21,6 @@
# Definitions for MICROBLAZE0
comment "Definitions for MICROBLAZE0"
- depends on ALLOW_EDIT_AUTO
config KERNEL_BASE_ADDR
hex "Physical address where Linux Kernel is"
@@ -30,33 +29,33 @@ config KERNEL_BASE_ADDR
BASE Address for kernel
config XILINX_MICROBLAZE0_FAMILY
- string "Targetted FPGA family" if ALLOW_EDIT_AUTO
+ string "Targetted FPGA family"
default "virtex5"
config XILINX_MICROBLAZE0_USE_MSR_INSTR
- int "USE_MSR_INSTR range (0:1)" if ALLOW_EDIT_AUTO
+ int "USE_MSR_INSTR range (0:1)"
default 1
config XILINX_MICROBLAZE0_USE_PCMP_INSTR
- int "USE_PCMP_INSTR range (0:1)" if ALLOW_EDIT_AUTO
+ int "USE_PCMP_INSTR range (0:1)"
default 1
config XILINX_MICROBLAZE0_USE_BARREL
- int "USE_BARREL range (0:1)" if ALLOW_EDIT_AUTO
+ int "USE_BARREL range (0:1)"
default 1
config XILINX_MICROBLAZE0_USE_DIV
- int "USE_DIV range (0:1)" if ALLOW_EDIT_AUTO
+ int "USE_DIV range (0:1)"
default 1
config XILINX_MICROBLAZE0_USE_HW_MUL
- int "USE_HW_MUL values (0=NONE, 1=MUL32, 2=MUL64)" if ALLOW_EDIT_AUTO
+ int "USE_HW_MUL values (0=NONE, 1=MUL32, 2=MUL64)"
default 2
config XILINX_MICROBLAZE0_USE_FPU
- int "USE_FPU values (0=NONE, 1=BASIC, 2=EXTENDED)" if ALLOW_EDIT_AUTO
+ int "USE_FPU values (0=NONE, 1=BASIC, 2=EXTENDED)"
default 2
config XILINX_MICROBLAZE0_HW_VER
- string "Core version number" if ALLOW_EDIT_AUTO
+ string "Core version number"
default 7.10.d
OpenPOWER on IntegriCloud