summaryrefslogtreecommitdiffstats
path: root/arch/m68knommu/Kconfig
diff options
context:
space:
mode:
authorGreg Ungerer <gerg@snapgear.com>2006-06-28 16:39:19 +1000
committerLinus Torvalds <torvalds@g5.osdl.org>2006-06-28 15:03:47 -0700
commitc750a012da6bc11ca4e49a5e170b417c4b344ffc (patch)
tree836ec4d8780a5f648208f44c90fe87b588f92eae /arch/m68knommu/Kconfig
parent3448ff8967a00067cbc3b6ebe9a3741b4e72f6d0 (diff)
downloadop-kernel-dev-c750a012da6bc11ca4e49a5e170b417c4b344ffc.zip
op-kernel-dev-c750a012da6bc11ca4e49a5e170b417c4b344ffc.tar.gz
[PATCH] m68knommu: configuration options for ROM region
Use Kconfig options to setup the optional ROM region used on some platforms. We used to define this in the linker script on a per board basis. The configure options are more flexible and clean up the linker script a lot. Signed-off-by: Greg Ungerer <gerg@uclinux.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Diffstat (limited to 'arch/m68knommu/Kconfig')
-rw-r--r--arch/m68knommu/Kconfig53
1 files changed, 53 insertions, 0 deletions
diff --git a/arch/m68knommu/Kconfig b/arch/m68knommu/Kconfig
index 8b6e723..e767f2d 100644
--- a/arch/m68knommu/Kconfig
+++ b/arch/m68knommu/Kconfig
@@ -540,6 +540,59 @@ config RAM32BIT
endchoice
+comment "ROM configuration"
+
+config ROM
+ bool "Specify ROM linker regions"
+ default n
+ help
+ Define a ROM region for the linker script. This creates a kernel
+ that can be stored in flash, with possibly the text, and data
+ regions being copied out to RAM at startup.
+
+config ROMBASE
+ hex "Address of the base of ROM device"
+ default "0"
+ depends on ROM
+ help
+ Define the address that the ROM region starts at. Some platforms
+ use this to set their chip select region accordingly for the boot
+ device.
+
+config ROMVEC
+ hex "Address of the base of the ROM vectors"
+ default "0"
+ depends on ROM
+ help
+ This is almost always the same as the base of the ROM. Since on all
+ 68000 type varients the vectors are at the base of the boot device
+ on system startup.
+
+config ROMVECSIZE
+ hex "Size of ROM vector region (in bytes)"
+ default "0x400"
+ depends on ROM
+ help
+ Define the size of the vector region in ROM. For most 68000
+ varients this would be 0x400 bytes in size. Set to 0 if you do
+ not want a vector region at the start of the ROM.
+
+config ROMSTART
+ hex "Address of the base of system image in ROM"
+ default "0x400"
+ depends on ROM
+ help
+ Define the start address of the system image in ROM. Commonly this
+ is strait after the ROM vectors.
+
+config ROMSIZE
+ hex "Size of the ROM device"
+ default "0x100000"
+ depends on ROM
+ help
+ Size of the ROM device. On some platforms this is used to setup
+ the chip select that controls the boot ROM device.
+
choice
prompt "Kernel executes from"
---help---
OpenPOWER on IntegriCloud