summaryrefslogtreecommitdiffstats
path: root/arch/m68k
diff options
context:
space:
mode:
authorGreg Ungerer <gerg@linux-m68k.org>2016-08-23 16:29:43 +1000
committerGreg Ungerer <gerg@linux-m68k.org>2016-09-26 12:02:57 +1000
commitbc065e4784beefdead3e62c31fa5ff7fbb1d7f9e (patch)
treec2631da8353074c2e9a295fe1523ca83cb8e2822 /arch/m68k
parent08895a8b6b06ed2323cd97a36ee40a116b3db8ed (diff)
downloadop-kernel-dev-bc065e4784beefdead3e62c31fa5ff7fbb1d7f9e.zip
op-kernel-dev-bc065e4784beefdead3e62c31fa5ff7fbb1d7f9e.tar.gz
m68knommu: fix early setup to not access variables
The early setup code for the ColdFire 53xx platform accesses variables before the RAM and other system initialization steps may have taken place. Currently it has 2 global variables that will end up in the bss section that are accessed during this early setup. There is a special static RAM stack setup at this time, but not necessarily the RAM where kernel data sections will end up. Even on system setups where RAM is setup by a boot loader the access to the early setup variables is before the BSS section has been initialized. This can potentially corrupt a ram loaded root filesystem that sits in that memory area before it has been moved. These 2 variables are not used at all after being set, and can just be removed. Reported-by: Christian Gieseler <christiangieseler@yahoo.de> Signed-off-by: Greg Ungerer <gerg@linux-m68k.org>
Diffstat (limited to 'arch/m68k')
-rw-r--r--arch/m68k/coldfire/m53xx.c8
1 files changed, 2 insertions, 6 deletions
diff --git a/arch/m68k/coldfire/m53xx.c b/arch/m68k/coldfire/m53xx.c
index 80879a7..2502f63 100644
--- a/arch/m68k/coldfire/m53xx.c
+++ b/arch/m68k/coldfire/m53xx.c
@@ -271,9 +271,6 @@ void __init config_BSP(char *commandp, int size)
#define NAND_FLASH_ADDRESS (0xD0000000)
-int sys_clk_khz = 0;
-int sys_clk_mhz = 0;
-
void wtm_init(void);
void scm_init(void);
void gpio_init(void);
@@ -286,9 +283,8 @@ int get_sys_clock (void);
asmlinkage void __init sysinit(void)
{
- sys_clk_khz = clock_pll(0, 0);
- sys_clk_mhz = sys_clk_khz/1000;
-
+ clock_pll(0, 0);
+
wtm_init();
scm_init();
gpio_init();
OpenPOWER on IntegriCloud