summaryrefslogtreecommitdiffstats
path: root/arch/m68k/platform/coldfire/intc-simr.c
diff options
context:
space:
mode:
authorSteven King <sfking@fdwdc.com>2012-06-06 14:28:31 -0700
committerGreg Ungerer <gerg@uclinux.org>2012-07-16 09:59:21 +1000
commitbea8bcb12da09bd35cdada395d0d0db1aee2ba4c (patch)
tree0a62830f7538f8ab83c75fa4c445643adc258350 /arch/m68k/platform/coldfire/intc-simr.c
parentbdee4e26ba6568118f2376ebcfdeef3b7f527bce (diff)
downloadop-kernel-dev-bea8bcb12da09bd35cdada395d0d0db1aee2ba4c.zip
op-kernel-dev-bea8bcb12da09bd35cdada395d0d0db1aee2ba4c.tar.gz
m68knommu: Add support for the Coldfire m5441x.
Add support for the Coldfire 5441x (54410/54415/54416/54417/54418). Currently we only support noMMU mode. It requires the PIT patch posted previously as it uses the PIT instead of the dma timer as a clock source so we can get all that GENERIC_CLOCKEVENTS goodness. It also adds some simple clk definitions and very simple minded power management. The gpio code is tweeked and some additional devices are added to devices.c. The Makefile uses -mv4e as apparently, the only difference a v4m (m5441x) and a v4e is the later has a FPU, which I don't think should matter to us in the kernel. Signed-off-by: Steven King <sfking@fdwdc.com> Signed-off-by: Greg Ungerer <gerg@uclinux.org>
Diffstat (limited to 'arch/m68k/platform/coldfire/intc-simr.c')
-rw-r--r--arch/m68k/platform/coldfire/intc-simr.c26
1 files changed, 18 insertions, 8 deletions
diff --git a/arch/m68k/platform/coldfire/intc-simr.c b/arch/m68k/platform/coldfire/intc-simr.c
index 650d52e..7cf2c15 100644
--- a/arch/m68k/platform/coldfire/intc-simr.c
+++ b/arch/m68k/platform/coldfire/intc-simr.c
@@ -59,16 +59,18 @@ static unsigned int inline irq2ebit(unsigned int irq)
#endif
/*
- * There maybe one or two interrupt control units, each has 64
- * interrupts. If there is no second unit then MCFINTC1_* defines
- * will be 0 (and code for them optimized away).
+ * There maybe one, two or three interrupt control units, each has 64
+ * interrupts. If there is no second or third unit then MCFINTC1_* or
+ * MCFINTC2_* defines will be 0 (and code for them optimized away).
*/
static void intc_irq_mask(struct irq_data *d)
{
unsigned int irq = d->irq - MCFINT_VECBASE;
- if (MCFINTC1_SIMR && (irq > 64))
+ if (MCFINTC2_SIMR && (irq > 128))
+ __raw_writeb(irq - 128, MCFINTC2_SIMR);
+ else if (MCFINTC1_SIMR && (irq > 64))
__raw_writeb(irq - 64, MCFINTC1_SIMR);
else
__raw_writeb(irq, MCFINTC0_SIMR);
@@ -78,7 +80,9 @@ static void intc_irq_unmask(struct irq_data *d)
{
unsigned int irq = d->irq - MCFINT_VECBASE;
- if (MCFINTC1_CIMR && (irq > 64))
+ if (MCFINTC2_CIMR && (irq > 128))
+ __raw_writeb(irq - 128, MCFINTC2_CIMR);
+ else if (MCFINTC1_CIMR && (irq > 64))
__raw_writeb(irq - 64, MCFINTC1_CIMR);
else
__raw_writeb(irq, MCFINTC0_CIMR);
@@ -99,9 +103,11 @@ static unsigned int intc_irq_startup(struct irq_data *d)
unsigned int ebit = irq2ebit(irq);
u8 v;
+#if defined(MCFEPORT_EPDDR)
/* Set EPORT line as input */
v = __raw_readb(MCFEPORT_EPDDR);
__raw_writeb(v & ~(0x1 << ebit), MCFEPORT_EPDDR);
+#endif
/* Set EPORT line as interrupt source */
v = __raw_readb(MCFEPORT_EPIER);
@@ -109,12 +115,13 @@ static unsigned int intc_irq_startup(struct irq_data *d)
}
irq -= MCFINT_VECBASE;
- if (MCFINTC1_ICR0 && (irq > 64))
+ if (MCFINTC2_ICR0 && (irq > 128))
+ __raw_writeb(5, MCFINTC2_ICR0 + irq - 128);
+ else if (MCFINTC1_ICR0 && (irq > 64))
__raw_writeb(5, MCFINTC1_ICR0 + irq - 64);
else
__raw_writeb(5, MCFINTC0_ICR0 + irq);
-
intc_irq_unmask(d);
return 0;
}
@@ -175,8 +182,11 @@ void __init init_IRQ(void)
__raw_writeb(0xff, MCFINTC0_SIMR);
if (MCFINTC1_SIMR)
__raw_writeb(0xff, MCFINTC1_SIMR);
+ if (MCFINTC2_SIMR)
+ __raw_writeb(0xff, MCFINTC2_SIMR);
- eirq = MCFINT_VECBASE + 64 + (MCFINTC1_ICR0 ? 64 : 0);
+ eirq = MCFINT_VECBASE + 64 + (MCFINTC1_ICR0 ? 64 : 0) +
+ (MCFINTC2_ICR0 ? 64 : 0);
for (irq = MCFINT_VECBASE; (irq < eirq); irq++) {
if ((irq >= EINT1) && (irq <= EINT7))
irq_set_chip(irq, &intc_irq_chip_edge_port);
OpenPOWER on IntegriCloud