m68knommu: move the 5249 platform code into the common ColdFire code directory

All these separate directories for each ColdFire CPU SoC varient seems like
overkill. The majority of them only contain a single small config file. Move
these into the common ColdFire code directory.

Signed-off-by: Greg Ungerer <gerg@uclinux.org>

1 files changed, 0 insertions, 118 deletions

diff --git a/arch/m68k/platform/5249/config.c b/arch/m68k/platform/5249/config.c
deleted file mode 100644
index fdfa1ed..0000000
--- a/arch/m68k/platform/5249/config.c
+++ /dev/null
@@ -1,118 +0,0 @@
-/***************************************************************************/
-
-/*
- *	linux/arch/m68knommu/platform/5249/config.c
- *
- *	Copyright (C) 2002, Greg Ungerer (gerg@snapgear.com)
- */
-
-/***************************************************************************/
-
-#include <linux/kernel.h>
-#include <linux/param.h>
-#include <linux/init.h>
-#include <linux/io.h>
-#include <linux/platform_device.h>
-#include <asm/machdep.h>
-#include <asm/coldfire.h>
-#include <asm/mcfsim.h>
-#include <asm/mcfgpio.h>
-
-/***************************************************************************/
-
-struct mcf_gpio_chip mcf_gpio_chips[] = {
-	MCFGPS(GPIO0, 0, 32, MCFSIM2_GPIOENABLE, MCFSIM2_GPIOWRITE, MCFSIM2_GPIOREAD),
-	MCFGPS(GPIO1, 32, 32, MCFSIM2_GPIO1ENABLE, MCFSIM2_GPIO1WRITE, MCFSIM2_GPIO1READ),
-};
-
-unsigned int mcf_gpio_chips_size = ARRAY_SIZE(mcf_gpio_chips);
-
-/***************************************************************************/
-
-#ifdef CONFIG_M5249C3
-
-static struct resource m5249_smc91x_resources[] = {
-	{
-		.start		= 0xe0000300,
-		.end		= 0xe0000300 + 0x100,
-		.flags		= IORESOURCE_MEM,
-	},
-	{
-		.start		= MCFINTC2_GPIOIRQ6,
-		.end		= MCFINTC2_GPIOIRQ6,
-		.flags		= IORESOURCE_IRQ,
-	},
-};
-
-static struct platform_device m5249_smc91x = {
-	.name			= "smc91x",
-	.id			= 0,
-	.num_resources		= ARRAY_SIZE(m5249_smc91x_resources),
-	.resource		= m5249_smc91x_resources,
-};
-
-#endif /* CONFIG_M5249C3 */
-
-static struct platform_device *m5249_devices[] __initdata = {
-#ifdef CONFIG_M5249C3
-	&m5249_smc91x,
-#endif
-};
-
-/***************************************************************************/
-
-#if IS_ENABLED(CONFIG_SPI_COLDFIRE_QSPI)
-
-static void __init m5249_qspi_init(void)
-{
-	/* QSPI irq setup */
-	writeb(MCFSIM_ICR_AUTOVEC | MCFSIM_ICR_LEVEL4 | MCFSIM_ICR_PRI0,
-	       MCF_MBAR + MCFSIM_QSPIICR);
-	mcf_mapirq2imr(MCF_IRQ_QSPI, MCFINTC_QSPI);
-}
-
-#endif /* IS_ENABLED(CONFIG_SPI_COLDFIRE_QSPI) */
-
-/***************************************************************************/
-
-#ifdef CONFIG_M5249C3
-
-static void __init m5249_smc91x_init(void)
-{
-	u32  gpio;
-
-	/* Set the GPIO line as interrupt source for smc91x device */
-	gpio = readl(MCF_MBAR2 + MCFSIM2_GPIOINTENABLE);
-	writel(gpio | 0x40, MCF_MBAR2 + MCFSIM2_GPIOINTENABLE);
-
-	gpio = readl(MCF_MBAR2 + MCFSIM2_INTLEVEL5);
-	writel(gpio | 0x04000000, MCF_MBAR2 + MCFSIM2_INTLEVEL5);
-}
-
-#endif /* CONFIG_M5249C3 */
-
-/***************************************************************************/
-
-void __init config_BSP(char *commandp, int size)
-{
-	mach_sched_init = hw_timer_init;
-
-#ifdef CONFIG_M5249C3
-	m5249_smc91x_init();
-#endif
-#if IS_ENABLED(CONFIG_SPI_COLDFIRE_QSPI)
-	m5249_qspi_init();
-#endif
-}
-
-/***************************************************************************/
-
-static int __init init_BSP(void)
-{
-	platform_add_devices(m5249_devices, ARRAY_SIZE(m5249_devices));
-	return 0;
-}
-
-arch_initcall(init_BSP);
-
-/***************************************************************************/