summaryrefslogtreecommitdiffstats
path: root/arch/m68k/include/asm/entry.h
diff options
context:
space:
mode:
authorGreg Ungerer <gerg@uclinux.org>2011-06-22 13:50:44 +1000
committerGreg Ungerer <gerg@uclinux.org>2011-10-18 14:22:25 +1000
commit61619b12078dc8b85a3d4cbfa16f650daa341bd1 (patch)
treee1971eca6707ddc7fad852a6c7e29a3ad8766aee /arch/m68k/include/asm/entry.h
parent0a01b310fe6319d88690bd5a329c9e6a82ce7011 (diff)
downloadop-kernel-dev-61619b12078dc8b85a3d4cbfa16f650daa341bd1.zip
op-kernel-dev-61619b12078dc8b85a3d4cbfa16f650daa341bd1.tar.gz
m68k: merge mmu and non-mmu include/asm/entry.h files
The changes in the mmu version of entry.h (entry_mm.h) and the non-mmu version (entry_no.h) are not about the presence or use of an MMU at all. The main changes are to support the ColdFire processors. The code for trap entry and exit for all types of 68k processor outside coldfire is the same. So merge the files back to a single entry.h and share the common 68k entry/exit code. Some changes are required for the non-mmu entry handlers to adopt the differing macros for system call and interrupt entry, but this is quite strait forward. The changes for the ColdFire remove a couple of instructions for the separate a7 register case, and are no worse for the older single a7 register case. Signed-off-by: Greg Ungerer <gerg@uclinux.org>
Diffstat (limited to 'arch/m68k/include/asm/entry.h')
-rw-r--r--arch/m68k/include/asm/entry.h255
1 files changed, 252 insertions, 3 deletions
diff --git a/arch/m68k/include/asm/entry.h b/arch/m68k/include/asm/entry.h
index 876eec6..c3c5a86 100644
--- a/arch/m68k/include/asm/entry.h
+++ b/arch/m68k/include/asm/entry.h
@@ -1,5 +1,254 @@
-#ifdef __uClinux__
-#include "entry_no.h"
+#ifndef __M68K_ENTRY_H
+#define __M68K_ENTRY_H
+
+#include <asm/setup.h>
+#include <asm/page.h>
+#ifdef __ASSEMBLY__
+#include <asm/thread_info.h>
+#endif
+
+/*
+ * Stack layout in 'ret_from_exception':
+ *
+ * This allows access to the syscall arguments in registers d1-d5
+ *
+ * 0(sp) - d1
+ * 4(sp) - d2
+ * 8(sp) - d3
+ * C(sp) - d4
+ * 10(sp) - d5
+ * 14(sp) - a0
+ * 18(sp) - a1
+ * 1C(sp) - a2
+ * 20(sp) - d0
+ * 24(sp) - orig_d0
+ * 28(sp) - stack adjustment
+ * 2C(sp) - [ sr ] [ format & vector ]
+ * 2E(sp) - [ pc-hiword ] [ sr ]
+ * 30(sp) - [ pc-loword ] [ pc-hiword ]
+ * 32(sp) - [ format & vector ] [ pc-loword ]
+ * ^^^^^^^^^^^^^^^^^ ^^^^^^^^^^^^^^^^^
+ * M68K COLDFIRE
+ */
+
+/* the following macro is used when enabling interrupts */
+#if defined(MACH_ATARI_ONLY)
+ /* block out HSYNC on the atari */
+#define ALLOWINT (~0x400)
+#define MAX_NOINT_IPL 3
#else
-#include "entry_mm.h"
+ /* portable version */
+#define ALLOWINT (~0x700)
+#define MAX_NOINT_IPL 0
+#endif /* machine compilation types */
+
+#ifdef __ASSEMBLY__
+/*
+ * This defines the normal kernel pt-regs layout.
+ *
+ * regs a3-a6 and d6-d7 are preserved by C code
+ * the kernel doesn't mess with usp unless it needs to
+ */
+#define SWITCH_STACK_SIZE (6*4+4) /* includes return address */
+
+#ifdef CONFIG_COLDFIRE
+#ifdef CONFIG_COLDFIRE_SW_A7
+/*
+ * This is made a little more tricky on older ColdFires. There is no
+ * separate supervisor and user stack pointers. Need to artificially
+ * construct a usp in software... When doing this we need to disable
+ * interrupts, otherwise bad things will happen.
+ */
+.globl sw_usp
+.globl sw_ksp
+
+.macro SAVE_ALL_SYS
+ move #0x2700,%sr /* disable intrs */
+ btst #5,%sp@(2) /* from user? */
+ bnes 6f /* no, skip */
+ movel %sp,sw_usp /* save user sp */
+ addql #8,sw_usp /* remove exception */
+ movel sw_ksp,%sp /* kernel sp */
+ subql #8,%sp /* room for exception */
+ clrl %sp@- /* stkadj */
+ movel %d0,%sp@- /* orig d0 */
+ movel %d0,%sp@- /* d0 */
+ lea %sp@(-32),%sp /* space for 8 regs */
+ moveml %d1-%d5/%a0-%a2,%sp@
+ movel sw_usp,%a0 /* get usp */
+ movel %a0@-,%sp@(PT_OFF_PC) /* copy exception program counter */
+ movel %a0@-,%sp@(PT_OFF_FORMATVEC)/*copy exception format/vector/sr */
+ bra 7f
+ 6:
+ clrl %sp@- /* stkadj */
+ movel %d0,%sp@- /* orig d0 */
+ movel %d0,%sp@- /* d0 */
+ lea %sp@(-32),%sp /* space for 8 regs */
+ moveml %d1-%d5/%a0-%a2,%sp@
+ 7:
+.endm
+
+.macro SAVE_ALL_INT
+ SAVE_ALL_SYS
+ moveq #-1,%d0 /* not system call entry */
+ movel %d0,%sp@(PT_OFF_ORIG_D0)
+.endm
+
+.macro RESTORE_USER
+ move #0x2700,%sr /* disable intrs */
+ movel sw_usp,%a0 /* get usp */
+ movel %sp@(PT_OFF_PC),%a0@- /* copy exception program counter */
+ movel %sp@(PT_OFF_FORMATVEC),%a0@-/*copy exception format/vector/sr */
+ moveml %sp@,%d1-%d5/%a0-%a2
+ lea %sp@(32),%sp /* space for 8 regs */
+ movel %sp@+,%d0
+ addql #4,%sp /* orig d0 */
+ addl %sp@+,%sp /* stkadj */
+ addql #8,%sp /* remove exception */
+ movel %sp,sw_ksp /* save ksp */
+ subql #8,sw_usp /* set exception */
+ movel sw_usp,%sp /* restore usp */
+ rte
+.endm
+
+.macro RDUSP
+ movel sw_usp,%a3
+.endm
+
+.macro WRUSP
+ movel %a3,sw_usp
+.endm
+
+#else /* !CONFIG_COLDFIRE_SW_A7 */
+/*
+ * Modern ColdFire parts have separate supervisor and user stack
+ * pointers. Simple load and restore macros for this case.
+ */
+.macro SAVE_ALL_SYS
+ move #0x2700,%sr /* disable intrs */
+ clrl %sp@- /* stkadj */
+ movel %d0,%sp@- /* orig d0 */
+ movel %d0,%sp@- /* d0 */
+ lea %sp@(-32),%sp /* space for 8 regs */
+ moveml %d1-%d5/%a0-%a2,%sp@
+.endm
+
+.macro SAVE_ALL_INT
+ move #0x2700,%sr /* disable intrs */
+ clrl %sp@- /* stkadj */
+ pea -1:w /* orig d0 */
+ movel %d0,%sp@- /* d0 */
+ lea %sp@(-32),%sp /* space for 8 regs */
+ moveml %d1-%d5/%a0-%a2,%sp@
+.endm
+
+.macro RESTORE_USER
+ moveml %sp@,%d1-%d5/%a0-%a2
+ lea %sp@(32),%sp /* space for 8 regs */
+ movel %sp@+,%d0
+ addql #4,%sp /* orig d0 */
+ addl %sp@+,%sp /* stkadj */
+ rte
+.endm
+
+.macro RDUSP
+ /*move %usp,%a3*/
+ .word 0x4e6b
+.endm
+
+.macro WRUSP
+ /*move %a3,%usp*/
+ .word 0x4e63
+.endm
+
+#endif /* !CONFIG_COLDFIRE_SW_A7 */
+
+.macro SAVE_SWITCH_STACK
+ lea %sp@(-24),%sp /* 6 regs */
+ moveml %a3-%a6/%d6-%d7,%sp@
+.endm
+
+.macro RESTORE_SWITCH_STACK
+ moveml %sp@,%a3-%a6/%d6-%d7
+ lea %sp@(24),%sp /* 6 regs */
+.endm
+
+#else /* !CONFIG_COLDFIRE */
+
+/*
+ * All other types of m68k parts (68000, 680x0, CPU32) have the same
+ * entry and exit code.
+ */
+
+/*
+ * a -1 in the orig_d0 field signifies
+ * that the stack frame is NOT for syscall
+ */
+.macro SAVE_ALL_INT
+ clrl %sp@- /* stk_adj */
+ pea -1:w /* orig d0 */
+ movel %d0,%sp@- /* d0 */
+ moveml %d1-%d5/%a0-%a2,%sp@-
+.endm
+
+.macro SAVE_ALL_SYS
+ clrl %sp@- /* stk_adj */
+ movel %d0,%sp@- /* orig d0 */
+ movel %d0,%sp@- /* d0 */
+ moveml %d1-%d5/%a0-%a2,%sp@-
+.endm
+
+.macro RESTORE_ALL
+ moveml %sp@+,%a0-%a2/%d1-%d5
+ movel %sp@+,%d0
+ addql #4,%sp /* orig d0 */
+ addl %sp@+,%sp /* stk adj */
+ rte
+.endm
+
+
+.macro SAVE_SWITCH_STACK
+ moveml %a3-%a6/%d6-%d7,%sp@-
+.endm
+
+.macro RESTORE_SWITCH_STACK
+ moveml %sp@+,%a3-%a6/%d6-%d7
+.endm
+
+#endif /* !CONFIG_COLDFIRE */
+
+/*
+ * Register %a2 is reserved and set to current task on MMU enabled systems.
+ * Non-MMU systems do not reserve %a2 in this way, and this definition is
+ * not used for them.
+ */
+#define curptr a2
+
+#define GET_CURRENT(tmp) get_current tmp
+.macro get_current reg=%d0
+ movel %sp,\reg
+ andw #-THREAD_SIZE,\reg
+ movel \reg,%curptr
+ movel %curptr@,%curptr
+.endm
+
+#else /* C source */
+
+#define STR(X) STR1(X)
+#define STR1(X) #X
+
+#define SAVE_ALL_INT \
+ "clrl %%sp@-;" /* stk_adj */ \
+ "pea -1:w;" /* orig d0 = -1 */ \
+ "movel %%d0,%%sp@-;" /* d0 */ \
+ "moveml %%d1-%%d5/%%a0-%%a2,%%sp@-"
+
+#define GET_CURRENT(tmp) \
+ "movel %%sp,"#tmp"\n\t" \
+ "andw #-"STR(THREAD_SIZE)","#tmp"\n\t" \
+ "movel "#tmp",%%a2\n\t" \
+ "movel %%a2@,%%a2"
+
#endif
+
+#endif /* __M68K_ENTRY_H */
OpenPOWER on IntegriCloud