m68knommu: remove obsolete 68360 support

Remove the obsolete Motorola/Freescale 68360 SoC support. It has been
bit rotting for many years with little active use in mainlne. There has
been no serial driver support for many years, so it is largely not
useful in its current state.

Signed-off-by: Greg Ungerer <gerg@uclinux.org>

1 files changed, 0 insertions, 413 deletions

diff --git a/arch/m68k/68360/head-rom.S b/arch/m68k/68360/head-rom.S
deleted file mode 100644
index b3a7e40..0000000
--- a/arch/m68k/68360/head-rom.S
+++ /dev/null
@@ -1,413 +0,0 @@
-/*
- * head-rom.S - startup code for Motorola 68360
- *
- * Copyright (C) SED Systems, a Division of Calian Ltd.
- * Based on: arch/m68knommu/platform/68328/pilot/crt0_rom.S
- * Based on: arch/m68knommu/platform/68360/uCquicc/crt0_rom.S, 2.0.38.1.pre7
- *           uClinux Kernel
- * Copyright (C) Michael Leslie <mleslie@lineo.com>
- * Based on: arch/m68knommu/platform/68EZ328/ucsimm/crt0_rom.S
- * Copyright (C) 1998  D. Jeff Dionne <jeff@uclinux.org>,
- *
- */
-
-.global _stext
-.global __bss_start
-.global _start
-
-.global _rambase
-.global _ramvec
-.global _ramstart
-.global _ramend
-
-.global _quicc_base
-.global _periph_base
-
-#define	RAMEND                      (CONFIG_RAMBASE + CONFIG_RAMSIZE)
-
-#define REGB                        0x1000
-#define PEPAR                       (_dprbase + REGB + 0x0016)
-#define GMR                         (_dprbase + REGB + 0x0040)
-#define OR0                         (_dprbase + REGB + 0x0054)
-#define BR0                         (_dprbase + REGB + 0x0050)
-
-#define OR1                         (_dprbase + REGB + 0x0064)
-#define BR1                         (_dprbase + REGB + 0x0060)
-
-#define OR2                         (_dprbase + REGB + 0x0074)
-#define BR2                         (_dprbase + REGB + 0x0070)
-
-#define OR3                         (_dprbase + REGB + 0x0084)
-#define BR3                         (_dprbase + REGB + 0x0080)
-
-#define OR4                         (_dprbase + REGB + 0x0094)
-#define BR4                         (_dprbase + REGB + 0x0090)
-
-#define OR5                         (_dprbase + REGB + 0x00A4)
-#define BR5                         (_dprbase + REGB + 0x00A0)
-
-#define OR6                         (_dprbase + REGB + 0x00b4)
-#define BR6                         (_dprbase + REGB + 0x00b0)
-
-#define OR7                         (_dprbase + REGB + 0x00c4)
-#define BR7                         (_dprbase + REGB + 0x00c0)
-
-#define MCR                         (_dprbase + REGB + 0x0000)
-#define AVR                         (_dprbase + REGB + 0x0008)
-
-#define SYPCR                       (_dprbase + REGB + 0x0022)
-
-#define PLLCR                       (_dprbase + REGB + 0x0010)
-#define CLKOCR                      (_dprbase + REGB + 0x000C)
-#define CDVCR                       (_dprbase + REGB + 0x0014)
-
-#define BKAR                        (_dprbase + REGB + 0x0030)
-#define BKCR                        (_dprbase + REGB + 0x0034)
-#define SWIV                        (_dprbase + REGB + 0x0023)
-#define PICR                        (_dprbase + REGB + 0x0026)
-#define PITR                        (_dprbase + REGB + 0x002A)
-
-/* Define for all memory configuration */
-#define MCU_SIM_GMR                 0x00000000
-#define SIM_OR_MASK                 0x0fffffff
-
-/* Defines for chip select zero - the flash */
-#define SIM_OR0_MASK                0x20000000
-#define SIM_BR0_MASK                0x00000001
-
-/* Defines for chip select one - the RAM */
-#define SIM_OR1_MASK                0x10000000
-#define SIM_BR1_MASK                0x00000001
-
-#define MCU_SIM_MBAR_ADRS           0x0003ff00
-#define MCU_SIM_MBAR_BA_MASK        0xfffff000
-#define MCU_SIM_MBAR_AS_MASK        0x00000001
-
-#define MCU_SIM_PEPAR               0x00B4
-    
-#define MCU_DISABLE_INTRPTS         0x2700
-#define MCU_SIM_AVR                 0x00
-    
-#define MCU_SIM_MCR                 0x00005cff
-
-#define MCU_SIM_CLKOCR              0x00
-#define MCU_SIM_PLLCR               0x8000
-#define MCU_SIM_CDVCR               0x0000
-
-#define MCU_SIM_SYPCR               0x0000
-#define MCU_SIM_SWIV                0x00
-#define MCU_SIM_PICR                0x0000
-#define MCU_SIM_PITR                0x0000
-
-
-#include <asm/m68360_regs.h>
-
-	
-/*
- * By the time this RAM specific code begins to execute, DPRAM
- * and DRAM should already be mapped and accessible.
- */
-
-	.text
-_start:
-_stext:
-	nop
-	ori.w	#MCU_DISABLE_INTRPTS, %sr	/* disable interrupts: */
-	/* We should not need to setup the boot stack the reset should do it. */
-	movea.l	#RAMEND, %sp		/* set up stack at the end of DRAM:*/
-
-
-set_mbar_register:
-	moveq.l	#0x07, %d1			/* Setup MBAR */
-	movec	%d1, %dfc
-
-	lea.l	MCU_SIM_MBAR_ADRS, %a0
-	move.l	#_dprbase, %d0
-	andi.l	#MCU_SIM_MBAR_BA_MASK, %d0
-	ori.l	#MCU_SIM_MBAR_AS_MASK, %d0
-	moves.l	%d0, %a0@
-
-	moveq.l	#0x05, %d1
-	movec.l	%d1, %dfc
-
-	/* Now we can begin to access registers in DPRAM */
-
-set_sim_mcr:
-	/* Set Module Configuration Register */
-	move.l	#MCU_SIM_MCR, MCR
-
-	/* to do:	Determine cause of reset */
-
-	/*
-	 *	configure system clock MC68360 p. 6-40
-	 *	(value +1)*osc/128 = system clock
-	 *                    or
-	 *	(value + 1)*osc = system clock
-	 *	You do not need to divide the oscillator by 128 unless you want to.
-	 */
-set_sim_clock:
-	move.w	#MCU_SIM_PLLCR, PLLCR
-	move.b	#MCU_SIM_CLKOCR, CLKOCR
-	move.w	#MCU_SIM_CDVCR, CDVCR
-
-	/* Wait for the PLL to settle */
-	move.w	#16384, %d0
-pll_settle_wait:
-	subi.w	#1, %d0
-	bne	pll_settle_wait
-
-	/* Setup the system protection register, and watchdog timer register */
-	move.b	#MCU_SIM_SWIV, SWIV
-	move.w	#MCU_SIM_PICR, PICR
-	move.w	#MCU_SIM_PITR, PITR
-	move.w	#MCU_SIM_SYPCR, SYPCR
-
-	/* Clear DPRAM - system + parameter */
-	movea.l	#_dprbase, %a0
-	movea.l	#_dprbase+0x2000, %a1
-
-	/* Copy 0 to %a0 until %a0 == %a1 */
-clear_dpram:
-	movel	#0, %a0@+
-	cmpal	%a0, %a1
-	bhi	clear_dpram
-
-configure_memory_controller:    
-	/* Set up Global Memory Register (GMR) */
-	move.l	#MCU_SIM_GMR, %d0
-	move.l	%d0, GMR
-
-configure_chip_select_0:
-	move.l	#0x00400000, %d0
-	subq.l	#0x01, %d0
-	eori.l	#SIM_OR_MASK, %d0
-	ori.l	#SIM_OR0_MASK, %d0
-	move.l	%d0, OR0
-
-	move.l	#__rom_start, %d0
-	ori.l	#SIM_BR0_MASK, %d0
-	move.l	%d0, BR0
-
-	move.l	#0x0, BR1
-	move.l	#0x0, BR2
-	move.l	#0x0, BR3
-	move.l	#0x0, BR4
-	move.l	#0x0, BR5
-	move.l	#0x0, BR6
-	move.l	#0x0, BR7
-
-	move.w	#MCU_SIM_PEPAR, PEPAR 
-
-	/* point to vector table: */
-	move.l	#_romvec, %a0
-	move.l	#_ramvec, %a1
-copy_vectors:
-	move.l	%a0@, %d0
-	move.l	%d0, %a1@
-	move.l	%a0@, %a1@
-	addq.l	#0x04, %a0
-	addq.l	#0x04, %a1
-	cmp.l	#_start, %a0
-	blt	copy_vectors
-
-	move.l	#_ramvec, %a1
-	movec	%a1, %vbr
-
-
-	/* Copy data segment from ROM to RAM */
-	moveal	#_etext, %a0
-	moveal	#_sdata, %a1
-	moveal	#_edata, %a2
-
-	/* Copy %a0 to %a1 until %a1 == %a2 */
-LD1:
-	move.l	%a0@, %d0
-	addq.l	#0x04, %a0
-	move.l	%d0, %a1@
-	addq.l	#0x04, %a1
-	cmp.l	#_edata, %a1
-	blt	LD1
-
-	moveal	#__bss_start, %a0
-	moveal	#__bss_stop, %a1
-
-	/* Copy 0 to %a0 until %a0 == %a1 */
-L1:
-	movel	#0, %a0@+
-	cmpal	%a0, %a1
-	bhi	L1
-
-load_quicc:
-	move.l	#_dprbase, _quicc_base
-
-store_ram_size:
-	/* Set ram size information */
-	move.l	#_sdata, _rambase
-	move.l	#__bss_stop, _ramstart
-	move.l	#RAMEND, %d0
-	sub.l	#0x1000, %d0			/* Reserve 4K for stack space.*/
-	move.l	%d0, _ramend			/* Different from RAMEND.*/
-
-	pea	0
-	pea	env
-	pea	%sp@(4)
-	pea	0
-
-	lea	init_thread_union, %a2
-	lea	0x2000(%a2), %sp
-
-lp:
-	jsr	start_kernel
-
-_exit:
-	jmp	_exit
-
-
-	.data
-	.align 4
-env:
-	.long	0
-_quicc_base:
-	.long	0
-_periph_base:
-	.long	0
-_ramvec:
-	.long   0
-_rambase:
-	.long   0
-_ramstart:
-	.long   0
-_ramend:
-	.long   0
-_dprbase:
-	.long	0xffffe000
-
-
-	.text
-
-    /*
-     * These are the exception vectors at boot up, they are copied into RAM
-     * and then overwritten as needed.
-     */
- 
-.section ".data..initvect","awx"
-    .long   RAMEND	/* Reset: Initial Stack Pointer                 - 0.  */
-    .long   _start      /* Reset: Initial Program Counter               - 1.  */
-    .long   buserr      /* Bus Error                                    - 2.  */
-    .long   trap        /* Address Error                                - 3.  */
-    .long   trap        /* Illegal Instruction                          - 4.  */
-    .long   trap        /* Divide by zero                               - 5.  */
-    .long   trap        /* CHK, CHK2 Instructions                       - 6.  */
-    .long   trap        /* TRAPcc, TRAPV Instructions                   - 7.  */
-    .long   trap        /* Privilege Violation                          - 8.  */
-    .long   trap        /* Trace                                        - 9.  */
-    .long   trap        /* Line 1010 Emulator                           - 10. */
-    .long   trap        /* Line 1111 Emualtor                           - 11. */
-    .long   trap        /* Harware Breakpoint                           - 12. */
-    .long   trap        /* (Reserved for Coprocessor Protocol Violation)- 13. */
-    .long   trap        /* Format Error                                 - 14. */
-    .long   trap        /* Uninitialized Interrupt                      - 15. */
-    .long   trap        /* (Unassigned, Reserver)                       - 16. */
-    .long   trap        /* (Unassigned, Reserver)                       - 17. */
-    .long   trap        /* (Unassigned, Reserver)                       - 18. */
-    .long   trap        /* (Unassigned, Reserver)                       - 19. */
-    .long   trap        /* (Unassigned, Reserver)                       - 20. */
-    .long   trap        /* (Unassigned, Reserver)                       - 21. */
-    .long   trap        /* (Unassigned, Reserver)                       - 22. */
-    .long   trap        /* (Unassigned, Reserver)                       - 23. */
-    .long   trap        /* Spurious Interrupt                           - 24. */
-    .long   trap        /* Level 1 Interrupt Autovector                 - 25. */
-    .long   trap        /* Level 2 Interrupt Autovector                 - 26. */
-    .long   trap        /* Level 3 Interrupt Autovector                 - 27. */
-    .long   trap        /* Level 4 Interrupt Autovector                 - 28. */
-    .long   trap        /* Level 5 Interrupt Autovector                 - 29. */
-    .long   trap        /* Level 6 Interrupt Autovector                 - 30. */
-    .long   trap        /* Level 7 Interrupt Autovector                 - 31. */
-    .long   system_call /* Trap Instruction Vectors 0                   - 32. */
-    .long   trap        /* Trap Instruction Vectors 1                   - 33. */
-    .long   trap        /* Trap Instruction Vectors 2                   - 34. */
-    .long   trap        /* Trap Instruction Vectors 3                   - 35. */
-    .long   trap        /* Trap Instruction Vectors 4                   - 36. */
-    .long   trap        /* Trap Instruction Vectors 5                   - 37. */
-    .long   trap        /* Trap Instruction Vectors 6                   - 38. */
-    .long   trap        /* Trap Instruction Vectors 7                   - 39. */
-    .long   trap        /* Trap Instruction Vectors 8                   - 40. */
-    .long   trap        /* Trap Instruction Vectors 9                   - 41. */
-    .long   trap        /* Trap Instruction Vectors 10                  - 42. */
-    .long   trap        /* Trap Instruction Vectors 11                  - 43. */
-    .long   trap        /* Trap Instruction Vectors 12                  - 44. */
-    .long   trap        /* Trap Instruction Vectors 13                  - 45. */
-    .long   trap        /* Trap Instruction Vectors 14                  - 46. */
-    .long   trap        /* Trap Instruction Vectors 15                  - 47. */
-    .long   0           /* (Reserved for Coprocessor)                   - 48. */
-    .long   0           /* (Reserved for Coprocessor)                   - 49. */
-    .long   0           /* (Reserved for Coprocessor)                   - 50. */
-    .long   0           /* (Reserved for Coprocessor)                   - 51. */
-    .long   0           /* (Reserved for Coprocessor)                   - 52. */
-    .long   0           /* (Reserved for Coprocessor)                   - 53. */
-    .long   0           /* (Reserved for Coprocessor)                   - 54. */
-    .long   0           /* (Reserved for Coprocessor)                   - 55. */
-    .long   0           /* (Reserved for Coprocessor)                   - 56. */
-    .long   0           /* (Reserved for Coprocessor)                   - 57. */
-    .long   0           /* (Reserved for Coprocessor)                   - 58. */
-    .long   0           /* (Unassigned, Reserved)                       - 59. */
-    .long   0           /* (Unassigned, Reserved)                       - 60. */
-    .long   0           /* (Unassigned, Reserved)                       - 61. */
-    .long   0           /* (Unassigned, Reserved)                       - 62. */
-    .long   0           /* (Unassigned, Reserved)                       - 63. */
-    /*                  The assignment of these vectors to the CPM is         */
-    /*                  dependent on the configuration of the CPM vba         */
-    /*                          fields.                                       */
-    .long   0           /* (User-Defined Vectors 1) CPM Error           - 64. */
-    .long   0           /* (User-Defined Vectors 2) CPM Parallel IO PC11- 65. */
-    .long   0           /* (User-Defined Vectors 3) CPM Parallel IO PC10- 66. */
-    .long   0           /* (User-Defined Vectors 4) CPM SMC2 / PIP      - 67. */
-    .long   0           /* (User-Defined Vectors 5) CPM SMC1            - 68. */
-    .long   0           /* (User-Defined Vectors 6) CPM SPI             - 69. */
-    .long   0           /* (User-Defined Vectors 7) CPM Parallel IO PC9 - 70. */
-    .long   0           /* (User-Defined Vectors 8) CPM Timer 4         - 71. */
-    .long   0           /* (User-Defined Vectors 9) CPM Reserved        - 72. */
-    .long   0           /* (User-Defined Vectors 10) CPM Parallel IO PC8- 73. */
-    .long   0           /* (User-Defined Vectors 11) CPM Parallel IO PC7- 74. */
-    .long   0           /* (User-Defined Vectors 12) CPM Parallel IO PC6- 75. */
-    .long   0           /* (User-Defined Vectors 13) CPM Timer 3        - 76. */
-    .long   0           /* (User-Defined Vectors 14) CPM Reserved       - 77. */
-    .long   0           /* (User-Defined Vectors 15) CPM Parallel IO PC5- 78. */
-    .long   0           /* (User-Defined Vectors 16) CPM Parallel IO PC4- 79. */
-    .long   0           /* (User-Defined Vectors 17) CPM Reserved       - 80. */
-    .long   0           /* (User-Defined Vectors 18) CPM RISC Timer Tbl - 81. */
-    .long   0           /* (User-Defined Vectors 19) CPM Timer 2        - 82. */
-    .long   0           /* (User-Defined Vectors 21) CPM Reserved       - 83. */
-    .long   0           /* (User-Defined Vectors 22) CPM IDMA2          - 84. */
-    .long   0           /* (User-Defined Vectors 23) CPM IDMA1          - 85. */
-    .long   0           /* (User-Defined Vectors 24) CPM SDMA Bus Err   - 86. */
-    .long   0           /* (User-Defined Vectors 25) CPM Parallel IO PC3- 87. */
-    .long   0           /* (User-Defined Vectors 26) CPM Parallel IO PC2- 88. */
-    .long   0           /* (User-Defined Vectors 27) CPM Timer 1        - 89. */
-    .long   0           /* (User-Defined Vectors 28) CPM Parallel IO PC1- 90. */
-    .long   0           /* (User-Defined Vectors 29) CPM SCC 4          - 91. */
-    .long   0           /* (User-Defined Vectors 30) CPM SCC 3          - 92. */
-    .long   0           /* (User-Defined Vectors 31) CPM SCC 2          - 93. */
-    .long   0           /* (User-Defined Vectors 32) CPM SCC 1          - 94. */
-    .long   0           /* (User-Defined Vectors 33) CPM Parallel IO PC0- 95. */
-    /*                  I don't think anything uses the vectors after here.   */
-    .long   0           /* (User-Defined Vectors 34)                    - 96. */
-    .long   0,0,0,0,0               /* (User-Defined Vectors 35  -  39). */
-    .long   0,0,0,0,0,0,0,0,0,0     /* (User-Defined Vectors 40  -  49). */
-    .long   0,0,0,0,0,0,0,0,0,0     /* (User-Defined Vectors 50  -  59). */
-    .long   0,0,0,0,0,0,0,0,0,0     /* (User-Defined Vectors 60  -  69). */
-    .long   0,0,0,0,0,0,0,0,0,0     /* (User-Defined Vectors 70  -  79). */
-    .long   0,0,0,0,0,0,0,0,0,0     /* (User-Defined Vectors 80  -  89). */
-    .long   0,0,0,0,0,0,0,0,0,0     /* (User-Defined Vectors 90  -  99). */
-    .long   0,0,0,0,0,0,0,0,0,0     /* (User-Defined Vectors 100 - 109). */
-    .long   0,0,0,0,0,0,0,0,0,0     /* (User-Defined Vectors 110 - 119). */
-    .long   0,0,0,0,0,0,0,0,0,0     /* (User-Defined Vectors 120 - 129). */
-    .long   0,0,0,0,0,0,0,0,0,0     /* (User-Defined Vectors 130 - 139). */
-    .long   0,0,0,0,0,0,0,0,0,0     /* (User-Defined Vectors 140 - 149). */
-    .long   0,0,0,0,0,0,0,0,0,0     /* (User-Defined Vectors 150 - 159). */
-    .long   0,0,0,0,0,0,0,0,0,0     /* (User-Defined Vectors 160 - 169). */
-    .long   0,0,0,0,0,0,0,0,0,0     /* (User-Defined Vectors 170 - 179). */
-    .long   0,0,0,0,0,0,0,0,0,0     /* (User-Defined Vectors 180 - 189). */
-    .long   0,0,0                   /* (User-Defined Vectors 190 - 192). */
-.text
-ignore: rte