m68knommu: remove obsolete 68360 support

Remove the obsolete Motorola/Freescale 68360 SoC support. It has been
bit rotting for many years with little active use in mainlne. There has
been no serial driver support for many years, so it is largely not
useful in its current state.

Signed-off-by: Greg Ungerer <gerg@uclinux.org>

1 files changed, 0 insertions, 169 deletions

diff --git a/arch/m68k/68360/config.c b/arch/m68k/68360/config.c
deleted file mode 100644
index b65fe4e..0000000
--- a/arch/m68k/68360/config.c
+++ /dev/null
@@ -1,169 +0,0 @@
-/*
- *  config.c - non-mmu 68360 platform initialization code
- *
- *  Copyright (c) 2000 Michael Leslie <mleslie@lineo.com>
- *  Copyright (C) 1993 Hamish Macdonald
- *  Copyright (C) 1999 D. Jeff Dionne <jeff@uclinux.org>
- *
- * This file is subject to the terms and conditions of the GNU General Public
- * License.  See the file COPYING in the main directory of this archive
- * for more details.
- */
-
-#include <stdarg.h>
-#include <linux/init.h>
-#include <linux/types.h>
-#include <linux/kernel.h>
-#include <linux/mm.h>
-#include <linux/interrupt.h>
-#include <linux/irq.h>
-
-#include <asm/setup.h>
-#include <asm/pgtable.h>
-#include <asm/machdep.h>
-#include <asm/m68360.h>
-
-#ifdef CONFIG_UCQUICC
-#include <asm/bootstd.h>
-#endif
-
-extern void m360_cpm_reset(void);
-
-// Mask to select if the PLL prescaler is enabled.
-#define MCU_PREEN   ((unsigned short)(0x0001 << 13))
-
-#if defined(CONFIG_UCQUICC)
-#define OSCILLATOR  (unsigned long int)33000000
-#endif
-
-static irq_handler_t timer_interrupt;
-unsigned long int system_clock;
-
-extern QUICC *pquicc;
-
-/* TODO  DON"T Hard Code this */
-/* calculate properly using the right PLL and prescaller */
-// unsigned int system_clock = 33000000l;
-extern unsigned long int system_clock; //In kernel setup.c
-
-
-static irqreturn_t hw_tick(int irq, void *dummy)
-{
-  /* Reset Timer1 */
-  /* TSTAT &= 0; */
-
-  pquicc->timer_ter1 = 0x0002; /* clear timer event */
-
-  return timer_interrupt(irq, dummy);
-}
-
-static struct irqaction m68360_timer_irq = {
-	.name	 = "timer",
-	.flags	 = IRQF_TIMER,
-	.handler = hw_tick,
-};
-
-void hw_timer_init(irq_handler_t handler)
-{
-  unsigned char prescaler;
-  unsigned short tgcr_save;
-
-#if 0
-  /* Restart mode, Enable int, 32KHz, Enable timer */
-  TCTL = TCTL_OM | TCTL_IRQEN | TCTL_CLKSOURCE_32KHZ | TCTL_TEN;
-  /* Set prescaler (Divide 32KHz by 32)*/
-  TPRER = 31;
-  /* Set compare register  32Khz / 32 / 10 = 100 */
-  TCMP = 10;                                                              
-
-  request_irq(IRQ_MACHSPEC | 1, timer_routine, 0, "timer", NULL);
-#endif
-
-  /* General purpose quicc timers: MC68360UM p7-20 */
-
-  /* Set up timer 1 (in [1..4]) to do 100Hz */
-  tgcr_save = pquicc->timer_tgcr & 0xfff0;
-  pquicc->timer_tgcr  = tgcr_save; /* stop and reset timer 1 */
-  /* pquicc->timer_tgcr |= 0x4444; */ /* halt timers when FREEZE (ie bdm freeze) */
-
-  prescaler = 8;
-  pquicc->timer_tmr1 = 0x001a | /* or=1, frr=1, iclk=01b */
-                           (unsigned short)((prescaler - 1) << 8);
-    
-  pquicc->timer_tcn1 = 0x0000; /* initial count */
-  /* calculate interval for 100Hz based on the _system_clock: */
-  pquicc->timer_trr1 = (system_clock/ prescaler) / HZ; /* reference count */
-
-  pquicc->timer_ter1 = 0x0003; /* clear timer events */
-
-  timer_interrupt = handler;
-
-  /* enable timer 1 interrupt in CIMR */
-  setup_irq(CPMVEC_TIMER1, &m68360_timer_irq);
-
-  /* Start timer 1: */
-  tgcr_save = (pquicc->timer_tgcr & 0xfff0) | 0x0001;
-  pquicc->timer_tgcr  = tgcr_save;
-}
-
-void BSP_reset (void)
-{
-  local_irq_disable();
-  asm volatile (
-    "moveal #_start, %a0;\n"
-    "moveb #0, 0xFFFFF300;\n"
-    "moveal 0(%a0), %sp;\n"
-    "moveal 4(%a0), %a0;\n"
-    "jmp (%a0);\n"
-    );
-}
-
-unsigned char *scc1_hwaddr;
-static int errno;
-
-#if defined (CONFIG_UCQUICC)
-_bsc0(char *, getserialnum)
-_bsc1(unsigned char *, gethwaddr, int, a)
-_bsc1(char *, getbenv, char *, a)
-#endif
-
-
-void __init config_BSP(char *command, int len)
-{
-  unsigned char *p;
-
-  m360_cpm_reset();
-
-  /* Calculate the real system clock value. */
-  {
-     unsigned int local_pllcr = (unsigned int)(pquicc->sim_pllcr);
-     if( local_pllcr & MCU_PREEN ) // If the prescaler is dividing by 128
-     {
-         int mf = (int)(pquicc->sim_pllcr & 0x0fff);
-         system_clock = (OSCILLATOR / 128) * (mf + 1);
-     }
-     else
-     {
-         int mf = (int)(pquicc->sim_pllcr & 0x0fff);
-         system_clock = (OSCILLATOR) * (mf + 1);
-     }
-  }
-
-  printk(KERN_INFO "\n68360 QUICC support (C) 2000 Lineo Inc.\n");
-
-#if defined(CONFIG_UCQUICC) && 0
-  printk(KERN_INFO "uCquicc serial string [%s]\n",getserialnum());
-  p = scc1_hwaddr = gethwaddr(0);
-  printk(KERN_INFO "uCquicc hwaddr %pM\n", p);
-
-  p = getbenv("APPEND");
-  if (p)
-    strcpy(p,command);
-  else
-    command[0] = 0;
-#else
-  scc1_hwaddr = "\00\01\02\03\04\05";
-#endif
- 
-  mach_reset = BSP_reset;
-}