Linux-2.6.12-rc2v2.6.12-rc2

Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in the meantime it's about
3.2GB when imported into git - space that would just make the early
git days unnecessarily complicated, when we don't have a lot of good
infrastructure for it.

Let it rip!

5 files changed, 2244 insertions, 0 deletions

diff --git a/arch/m32r/m32700ut/defconfig.m32700ut.smp b/arch/m32r/m32700ut/defconfig.m32700ut.smp
new file mode 100644
index 0000000..1c00218
--- /dev/null
+++ b/arch/m32r/m32700ut/defconfig.m32700ut.smp
@@ -0,0 +1,750 @@
+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.11-rc4
+# Wed Feb 16 21:10:50 2005
+#
+CONFIG_M32R=y
+# CONFIG_UID16 is not set
+CONFIG_GENERIC_ISA_DMA=y
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_GENERIC_IRQ_PROBE=y
+
+#
+# Code maturity level options
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_CLEAN_COMPILE=y
+CONFIG_LOCK_KERNEL=y
+
+#
+# General setup
+#
+CONFIG_LOCALVERSION=""
+CONFIG_SWAP=y
+CONFIG_SYSVIPC=y
+# CONFIG_POSIX_MQUEUE is not set
+CONFIG_BSD_PROCESS_ACCT=y
+# CONFIG_BSD_PROCESS_ACCT_V3 is not set
+CONFIG_SYSCTL=y
+# CONFIG_AUDIT is not set
+CONFIG_LOG_BUF_SHIFT=15
+CONFIG_HOTPLUG=y
+CONFIG_KOBJECT_UEVENT=y
+CONFIG_IKCONFIG=y
+# CONFIG_IKCONFIG_PROC is not set
+CONFIG_EMBEDDED=y
+# CONFIG_KALLSYMS is not set
+# CONFIG_FUTEX is not set
+# CONFIG_EPOLL is not set
+# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
+CONFIG_SHMEM=y
+CONFIG_CC_ALIGN_FUNCTIONS=0
+CONFIG_CC_ALIGN_LABELS=0
+CONFIG_CC_ALIGN_LOOPS=0
+CONFIG_CC_ALIGN_JUMPS=0
+# CONFIG_TINY_SHMEM is not set
+
+#
+# Loadable module support
+#
+CONFIG_MODULES=y
+CONFIG_MODULE_UNLOAD=y
+# CONFIG_MODULE_FORCE_UNLOAD is not set
+CONFIG_OBSOLETE_MODPARM=y
+# CONFIG_MODVERSIONS is not set
+# CONFIG_MODULE_SRCVERSION_ALL is not set
+CONFIG_KMOD=y
+CONFIG_STOP_MACHINE=y
+
+#
+# Processor type and features
+#
+# CONFIG_PLAT_MAPPI is not set
+# CONFIG_PLAT_USRV is not set
+CONFIG_PLAT_M32700UT=y
+# CONFIG_PLAT_OPSPUT is not set
+# CONFIG_PLAT_OAKS32R is not set
+# CONFIG_PLAT_MAPPI2 is not set
+CONFIG_CHIP_M32700=y
+# CONFIG_CHIP_M32102 is not set
+# CONFIG_CHIP_VDEC2 is not set
+# CONFIG_CHIP_OPSP is not set
+CONFIG_MMU=y
+CONFIG_TLB_ENTRIES=32
+CONFIG_ISA_M32R2=y
+CONFIG_ISA_DSP_LEVEL2=y
+CONFIG_ISA_DUAL_ISSUE=y
+CONFIG_BUS_CLOCK=50000000
+CONFIG_TIMER_DIVIDE=128
+# CONFIG_CPU_LITTLE_ENDIAN is not set
+CONFIG_MEMORY_START=0x08000000
+CONFIG_MEMORY_SIZE=0x01000000
+CONFIG_NOHIGHMEM=y
+# CONFIG_DISCONTIGMEM is not set
+CONFIG_RWSEM_GENERIC_SPINLOCK=y
+# CONFIG_RWSEM_XCHGADD_ALGORITHM is not set
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_PREEMPT=y
+# CONFIG_HAVE_DEC_LOCK is not set
+CONFIG_SMP=y
+CONFIG_CHIP_M32700_TS1=y
+CONFIG_NR_CPUS=2
+# CONFIG_NUMA is not set
+
+#
+# Bus options (PCI, PCMCIA, EISA, MCA, ISA)
+#
+# CONFIG_PCI is not set
+# CONFIG_ISA is not set
+
+#
+# PCCARD (PCMCIA/CardBus) support
+#
+CONFIG_PCCARD=y
+# CONFIG_PCMCIA_DEBUG is not set
+CONFIG_PCMCIA=y
+
+#
+# PC-card bridges
+#
+# CONFIG_TCIC is not set
+# CONFIG_M32R_PCC is not set
+CONFIG_M32R_CFC=y
+CONFIG_M32R_CFC_NUM=1
+
+#
+# PCI Hotplug Support
+#
+
+#
+# Executable file formats
+#
+CONFIG_BINFMT_ELF=y
+# CONFIG_BINFMT_MISC is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_STANDALONE=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+# CONFIG_FW_LOADER is not set
+
+#
+# Memory Technology Devices (MTD)
+#
+# CONFIG_MTD is not set
+
+#
+# Parallel port support
+#
+# CONFIG_PARPORT is not set
+
+#
+# Plug and Play support
+#
+
+#
+# Block devices
+#
+# CONFIG_BLK_DEV_FD is not set
+# CONFIG_BLK_DEV_COW_COMMON is not set
+CONFIG_BLK_DEV_LOOP=y
+# CONFIG_BLK_DEV_CRYPTOLOOP is not set
+CONFIG_BLK_DEV_NBD=y
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_COUNT=16
+CONFIG_BLK_DEV_RAM_SIZE=4096
+# CONFIG_BLK_DEV_INITRD is not set
+CONFIG_INITRAMFS_SOURCE=""
+# CONFIG_CDROM_PKTCDVD is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+# CONFIG_IOSCHED_AS is not set
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+# CONFIG_ATA_OVER_ETH is not set
+
+#
+# ATA/ATAPI/MFM/RLL support
+#
+CONFIG_IDE=y
+CONFIG_BLK_DEV_IDE=y
+
+#
+# Please see Documentation/ide.txt for help/info on IDE drives
+#
+# CONFIG_BLK_DEV_IDE_SATA is not set
+CONFIG_BLK_DEV_IDEDISK=y
+# CONFIG_IDEDISK_MULTI_MODE is not set
+CONFIG_BLK_DEV_IDECS=y
+CONFIG_BLK_DEV_IDECD=m
+# CONFIG_BLK_DEV_IDETAPE is not set
+# CONFIG_BLK_DEV_IDEFLOPPY is not set
+# CONFIG_BLK_DEV_IDESCSI is not set
+# CONFIG_IDE_TASK_IOCTL is not set
+
+#
+# IDE chipset support/bugfixes
+#
+CONFIG_IDE_GENERIC=y
+# CONFIG_IDE_ARM is not set
+# CONFIG_BLK_DEV_IDEDMA is not set
+# CONFIG_IDEDMA_AUTO is not set
+# CONFIG_BLK_DEV_HD is not set
+
+#
+# SCSI device support
+#
+CONFIG_SCSI=m
+CONFIG_SCSI_PROC_FS=y
+
+#
+# SCSI support type (disk, tape, CD-ROM)
+#
+CONFIG_BLK_DEV_SD=m
+# CONFIG_CHR_DEV_ST is not set
+# CONFIG_CHR_DEV_OSST is not set
+CONFIG_BLK_DEV_SR=m
+# CONFIG_BLK_DEV_SR_VENDOR is not set
+CONFIG_CHR_DEV_SG=m
+
+#
+# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
+#
+CONFIG_SCSI_MULTI_LUN=y
+# CONFIG_SCSI_CONSTANTS is not set
+# CONFIG_SCSI_LOGGING is not set
+
+#
+# SCSI Transport Attributes
+#
+# CONFIG_SCSI_SPI_ATTRS is not set
+# CONFIG_SCSI_FC_ATTRS is not set
+# CONFIG_SCSI_ISCSI_ATTRS is not set
+
+#
+# SCSI low-level drivers
+#
+# CONFIG_SCSI_SATA is not set
+# CONFIG_SCSI_DEBUG is not set
+
+#
+# PCMCIA SCSI adapter support
+#
+# CONFIG_PCMCIA_AHA152X is not set
+# CONFIG_PCMCIA_FDOMAIN is not set
+# CONFIG_PCMCIA_NINJA_SCSI is not set
+# CONFIG_PCMCIA_QLOGIC is not set
+# CONFIG_PCMCIA_SYM53C500 is not set
+
+#
+# Multi-device support (RAID and LVM)
+#
+# CONFIG_MD is not set
+
+#
+# Fusion MPT device support
+#
+
+#
+# IEEE 1394 (FireWire) support
+#
+
+#
+# I2O device support
+#
+
+#
+# Networking support
+#
+CONFIG_NET=y
+
+#
+# Networking options
+#
+CONFIG_PACKET=y
+# CONFIG_PACKET_MMAP is not set
+# CONFIG_NETLINK_DEV is not set
+CONFIG_UNIX=y
+# CONFIG_NET_KEY is not set
+CONFIG_INET=y
+# CONFIG_IP_MULTICAST is not set
+# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_PNP=y
+CONFIG_IP_PNP_DHCP=y
+# CONFIG_IP_PNP_BOOTP is not set
+# CONFIG_IP_PNP_RARP is not set
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+# CONFIG_ARPD is not set
+# CONFIG_SYN_COOKIES is not set
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_TUNNEL is not set
+CONFIG_IP_TCPDIAG=y
+# CONFIG_IP_TCPDIAG_IPV6 is not set
+# CONFIG_IPV6 is not set
+# CONFIG_NETFILTER is not set
+
+#
+# SCTP Configuration (EXPERIMENTAL)
+#
+# CONFIG_IP_SCTP is not set
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_NET_DIVERT is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+
+#
+# QoS and/or fair queueing
+#
+# CONFIG_NET_SCHED is not set
+# CONFIG_NET_CLS_ROUTE is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+CONFIG_NETDEVICES=y
+# CONFIG_DUMMY is not set
+# CONFIG_BONDING is not set
+# CONFIG_EQUALIZER is not set
+# CONFIG_TUN is not set
+
+#
+# Ethernet (10 or 100Mbit)
+#
+CONFIG_NET_ETHERNET=y
+CONFIG_MII=y
+CONFIG_SMC91X=y
+# CONFIG_NE2000 is not set
+
+#
+# Ethernet (1000 Mbit)
+#
+
+#
+# Ethernet (10000 Mbit)
+#
+
+#
+# Token Ring devices
+#
+
+#
+# Wireless LAN (non-hamradio)
+#
+# CONFIG_NET_RADIO is not set
+
+#
+# PCMCIA network device support
+#
+# CONFIG_NET_PCMCIA is not set
+
+#
+# Wan interfaces
+#
+# CONFIG_WAN is not set
+# CONFIG_PPP is not set
+# CONFIG_SLIP is not set
+# CONFIG_SHAPER is not set
+# CONFIG_NETCONSOLE is not set
+
+#
+# ISDN subsystem
+#
+# CONFIG_ISDN is not set
+
+#
+# Telephony Support
+#
+# CONFIG_PHONE is not set
+
+#
+# Input device support
+#
+CONFIG_INPUT=y
+
+#
+# Userland interfaces
+#
+# CONFIG_INPUT_MOUSEDEV is not set
+# CONFIG_INPUT_JOYDEV is not set
+# CONFIG_INPUT_TSDEV is not set
+# CONFIG_INPUT_EVDEV is not set
+# CONFIG_INPUT_EVBUG is not set
+
+#
+# Input I/O drivers
+#
+# CONFIG_GAMEPORT is not set
+CONFIG_SOUND_GAMEPORT=y
+CONFIG_SERIO=y
+# CONFIG_SERIO_I8042 is not set
+CONFIG_SERIO_SERPORT=y
+# CONFIG_SERIO_CT82C710 is not set
+# CONFIG_SERIO_LIBPS2 is not set
+# CONFIG_SERIO_RAW is not set
+
+#
+# Input Device Drivers
+#
+# CONFIG_INPUT_KEYBOARD is not set
+# CONFIG_INPUT_MOUSE is not set
+# CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TOUCHSCREEN is not set
+# CONFIG_INPUT_MISC is not set
+
+#
+# Character devices
+#
+CONFIG_VT=y
+CONFIG_VT_CONSOLE=y
+CONFIG_HW_CONSOLE=y
+# CONFIG_SERIAL_NONSTANDARD is not set
+
+#
+# Serial drivers
+#
+# CONFIG_SERIAL_8250 is not set
+
+#
+# Non-8250 serial port support
+#
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+CONFIG_SERIAL_M32R_SIO=y
+CONFIG_SERIAL_M32R_SIO_CONSOLE=y
+CONFIG_SERIAL_M32R_PLDSIO=y
+CONFIG_UNIX98_PTYS=y
+CONFIG_LEGACY_PTYS=y
+CONFIG_LEGACY_PTY_COUNT=256
+
+#
+# IPMI
+#
+# CONFIG_IPMI_HANDLER is not set
+
+#
+# Watchdog Cards
+#
+# CONFIG_WATCHDOG is not set
+# CONFIG_RTC is not set
+# CONFIG_GEN_RTC is not set
+CONFIG_DS1302=y
+# CONFIG_DTLK is not set
+# CONFIG_R3964 is not set
+
+#
+# Ftape, the floppy tape device driver
+#
+# CONFIG_DRM is not set
+
+#
+# PCMCIA character devices
+#
+# CONFIG_SYNCLINK_CS is not set
+# CONFIG_RAW_DRIVER is not set
+
+#
+# I2C support
+#
+# CONFIG_I2C is not set
+
+#
+# Dallas's 1-wire bus
+#
+# CONFIG_W1 is not set
+
+#
+# Misc devices
+#
+
+#
+# Multimedia devices
+#
+CONFIG_VIDEO_DEV=y
+
+#
+# Video For Linux
+#
+
+#
+# Video Adapters
+#
+# CONFIG_VIDEO_CPIA is not set
+CONFIG_VIDEO_M32R_AR=y
+CONFIG_VIDEO_M32R_AR_M64278=y
+
+#
+# Radio Adapters
+#
+# CONFIG_RADIO_MAESTRO is not set
+
+#
+# Digital Video Broadcasting Devices
+#
+# CONFIG_DVB is not set
+
+#
+# Graphics support
+#
+CONFIG_FB=y
+# CONFIG_FB_MODE_HELPERS is not set
+# CONFIG_FB_TILEBLITTING is not set
+# CONFIG_FB_VIRTUAL is not set
+
+#
+# Console display driver support
+#
+# CONFIG_VGA_CONSOLE is not set
+CONFIG_DUMMY_CONSOLE=y
+CONFIG_FRAMEBUFFER_CONSOLE=y
+# CONFIG_FONTS is not set
+CONFIG_FONT_8x8=y
+CONFIG_FONT_8x16=y
+
+#
+# Logo configuration
+#
+CONFIG_LOGO=y
+CONFIG_LOGO_LINUX_MONO=y
+CONFIG_LOGO_LINUX_VGA16=y
+CONFIG_LOGO_LINUX_CLUT224=y
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+
+#
+# Sound
+#
+# CONFIG_SOUND is not set
+
+#
+# USB support
+#
+# CONFIG_USB_ARCH_HAS_HCD is not set
+# CONFIG_USB_ARCH_HAS_OHCI is not set
+
+#
+# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' may also be needed; see USB_STORAGE Help for more information
+#
+
+#
+# USB Gadget Support
+#
+# CONFIG_USB_GADGET is not set
+
+#
+# MMC/SD Card support
+#
+# CONFIG_MMC is not set
+
+#
+# InfiniBand support
+#
+# CONFIG_INFINIBAND is not set
+
+#
+# File systems
+#
+CONFIG_EXT2_FS=y
+# CONFIG_EXT2_FS_XATTR is not set
+CONFIG_EXT3_FS=m
+CONFIG_EXT3_FS_XATTR=y
+# CONFIG_EXT3_FS_POSIX_ACL is not set
+# CONFIG_EXT3_FS_SECURITY is not set
+CONFIG_JBD=m
+CONFIG_JBD_DEBUG=y
+CONFIG_FS_MBCACHE=y
+CONFIG_REISERFS_FS=m
+# CONFIG_REISERFS_CHECK is not set
+# CONFIG_REISERFS_PROC_INFO is not set
+# CONFIG_REISERFS_FS_XATTR is not set
+# CONFIG_JFS_FS is not set
+
+#
+# XFS support
+#
+# CONFIG_XFS_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_ROMFS_FS is not set
+# CONFIG_QUOTA is not set
+CONFIG_DNOTIFY=y
+# CONFIG_AUTOFS_FS is not set
+# CONFIG_AUTOFS4_FS is not set
+
+#
+# CD-ROM/DVD Filesystems
+#
+CONFIG_ISO9660_FS=m
+CONFIG_JOLIET=y
+# CONFIG_ZISOFS is not set
+CONFIG_UDF_FS=m
+CONFIG_UDF_NLS=y
+
+#
+# DOS/FAT/NT Filesystems
+#
+CONFIG_FAT_FS=m
+CONFIG_MSDOS_FS=m
+CONFIG_VFAT_FS=m
+CONFIG_FAT_DEFAULT_CODEPAGE=437
+CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
+# CONFIG_NTFS_FS is not set
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+CONFIG_PROC_KCORE=y
+CONFIG_SYSFS=y
+CONFIG_DEVFS_FS=y
+CONFIG_DEVFS_MOUNT=y
+# CONFIG_DEVFS_DEBUG is not set
+# CONFIG_DEVPTS_FS_XATTR is not set
+CONFIG_TMPFS=y
+# CONFIG_TMPFS_XATTR is not set
+# CONFIG_HUGETLB_PAGE is not set
+CONFIG_RAMFS=y
+
+#
+# Miscellaneous filesystems
+#
+# CONFIG_ADFS_FS is not set
+# CONFIG_AFFS_FS is not set
+# CONFIG_HFS_FS is not set
+# CONFIG_HFSPLUS_FS is not set
+# CONFIG_BEFS_FS is not set
+# CONFIG_BFS_FS is not set
+# CONFIG_EFS_FS is not set
+# CONFIG_CRAMFS is not set
+# CONFIG_VXFS_FS is not set
+# CONFIG_HPFS_FS is not set
+# CONFIG_QNX4FS_FS is not set
+# CONFIG_SYSV_FS is not set
+# CONFIG_UFS_FS is not set
+
+#
+# Network File Systems
+#
+CONFIG_NFS_FS=y
+CONFIG_NFS_V3=y
+# CONFIG_NFS_V4 is not set
+# CONFIG_NFS_DIRECTIO is not set
+# CONFIG_NFSD is not set
+CONFIG_ROOT_NFS=y
+CONFIG_LOCKD=y
+CONFIG_LOCKD_V4=y
+CONFIG_SUNRPC=y
+# CONFIG_RPCSEC_GSS_KRB5 is not set
+# CONFIG_RPCSEC_GSS_SPKM3 is not set
+# CONFIG_SMB_FS is not set
+# CONFIG_CIFS is not set
+# CONFIG_NCP_FS is not set
+# CONFIG_CODA_FS is not set
+# CONFIG_AFS_FS is not set
+
+#
+# Partition Types
+#
+# CONFIG_PARTITION_ADVANCED is not set
+CONFIG_MSDOS_PARTITION=y
+
+#
+# Native Language Support
+#
+CONFIG_NLS=y
+CONFIG_NLS_DEFAULT="iso8859-1"
+# CONFIG_NLS_CODEPAGE_437 is not set
+# CONFIG_NLS_CODEPAGE_737 is not set
+# CONFIG_NLS_CODEPAGE_775 is not set
+# CONFIG_NLS_CODEPAGE_850 is not set
+# CONFIG_NLS_CODEPAGE_852 is not set
+# CONFIG_NLS_CODEPAGE_855 is not set
+# CONFIG_NLS_CODEPAGE_857 is not set
+# CONFIG_NLS_CODEPAGE_860 is not set
+# CONFIG_NLS_CODEPAGE_861 is not set
+# CONFIG_NLS_CODEPAGE_862 is not set
+# CONFIG_NLS_CODEPAGE_863 is not set
+# CONFIG_NLS_CODEPAGE_864 is not set
+# CONFIG_NLS_CODEPAGE_865 is not set
+# CONFIG_NLS_CODEPAGE_866 is not set
+# CONFIG_NLS_CODEPAGE_869 is not set
+# CONFIG_NLS_CODEPAGE_936 is not set
+# CONFIG_NLS_CODEPAGE_950 is not set
+# CONFIG_NLS_CODEPAGE_932 is not set
+# CONFIG_NLS_CODEPAGE_949 is not set
+# CONFIG_NLS_CODEPAGE_874 is not set
+# CONFIG_NLS_ISO8859_8 is not set
+# CONFIG_NLS_CODEPAGE_1250 is not set
+# CONFIG_NLS_CODEPAGE_1251 is not set
+# CONFIG_NLS_ASCII is not set
+# CONFIG_NLS_ISO8859_1 is not set
+# CONFIG_NLS_ISO8859_2 is not set
+# CONFIG_NLS_ISO8859_3 is not set
+# CONFIG_NLS_ISO8859_4 is not set
+# CONFIG_NLS_ISO8859_5 is not set
+# CONFIG_NLS_ISO8859_6 is not set
+# CONFIG_NLS_ISO8859_7 is not set
+# CONFIG_NLS_ISO8859_9 is not set
+# CONFIG_NLS_ISO8859_13 is not set
+# CONFIG_NLS_ISO8859_14 is not set
+# CONFIG_NLS_ISO8859_15 is not set
+# CONFIG_NLS_KOI8_R is not set
+# CONFIG_NLS_KOI8_U is not set
+# CONFIG_NLS_UTF8 is not set
+
+#
+# Profiling support
+#
+# CONFIG_PROFILING is not set
+
+#
+# Kernel hacking
+#
+# CONFIG_DEBUG_KERNEL is not set
+CONFIG_DEBUG_PREEMPT=y
+# CONFIG_DEBUG_BUGVERBOSE is not set
+# CONFIG_FRAME_POINTER is not set
+
+#
+# Security options
+#
+# CONFIG_KEYS is not set
+# CONFIG_SECURITY is not set
+
+#
+# Cryptographic options
+#
+# CONFIG_CRYPTO is not set
+
+#
+# Hardware crypto devices
+#
+
+#
+# Library routines
+#
+# CONFIG_CRC_CCITT is not set
+CONFIG_CRC32=y
+# CONFIG_LIBCRC32C is not set
diff --git a/arch/m32r/m32700ut/defconfig.m32700ut.up b/arch/m32r/m32700ut/defconfig.m32700ut.up
new file mode 100644
index 0000000..805357f
--- /dev/null
+++ b/arch/m32r/m32700ut/defconfig.m32700ut.up
@@ -0,0 +1,747 @@
+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.11-rc4
+# Wed Feb 16 21:10:54 2005
+#
+CONFIG_M32R=y
+# CONFIG_UID16 is not set
+CONFIG_GENERIC_ISA_DMA=y
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_GENERIC_IRQ_PROBE=y
+
+#
+# Code maturity level options
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_CLEAN_COMPILE=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_LOCK_KERNEL=y
+
+#
+# General setup
+#
+CONFIG_LOCALVERSION=""
+CONFIG_SWAP=y
+CONFIG_SYSVIPC=y
+# CONFIG_POSIX_MQUEUE is not set
+CONFIG_BSD_PROCESS_ACCT=y
+# CONFIG_BSD_PROCESS_ACCT_V3 is not set
+CONFIG_SYSCTL=y
+# CONFIG_AUDIT is not set
+CONFIG_LOG_BUF_SHIFT=14
+CONFIG_HOTPLUG=y
+CONFIG_KOBJECT_UEVENT=y
+CONFIG_IKCONFIG=y
+# CONFIG_IKCONFIG_PROC is not set
+CONFIG_EMBEDDED=y
+# CONFIG_KALLSYMS is not set
+# CONFIG_FUTEX is not set
+# CONFIG_EPOLL is not set
+# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
+CONFIG_SHMEM=y
+CONFIG_CC_ALIGN_FUNCTIONS=0
+CONFIG_CC_ALIGN_LABELS=0
+CONFIG_CC_ALIGN_LOOPS=0
+CONFIG_CC_ALIGN_JUMPS=0
+# CONFIG_TINY_SHMEM is not set
+
+#
+# Loadable module support
+#
+CONFIG_MODULES=y
+CONFIG_MODULE_UNLOAD=y
+# CONFIG_MODULE_FORCE_UNLOAD is not set
+CONFIG_OBSOLETE_MODPARM=y
+# CONFIG_MODVERSIONS is not set
+# CONFIG_MODULE_SRCVERSION_ALL is not set
+CONFIG_KMOD=y
+
+#
+# Processor type and features
+#
+# CONFIG_PLAT_MAPPI is not set
+# CONFIG_PLAT_USRV is not set
+CONFIG_PLAT_M32700UT=y
+# CONFIG_PLAT_OPSPUT is not set
+# CONFIG_PLAT_OAKS32R is not set
+# CONFIG_PLAT_MAPPI2 is not set
+CONFIG_CHIP_M32700=y
+# CONFIG_CHIP_M32102 is not set
+# CONFIG_CHIP_VDEC2 is not set
+# CONFIG_CHIP_OPSP is not set
+CONFIG_MMU=y
+CONFIG_TLB_ENTRIES=32
+CONFIG_ISA_M32R2=y
+CONFIG_ISA_DSP_LEVEL2=y
+CONFIG_ISA_DUAL_ISSUE=y
+CONFIG_BUS_CLOCK=50000000
+CONFIG_TIMER_DIVIDE=128
+# CONFIG_CPU_LITTLE_ENDIAN is not set
+CONFIG_MEMORY_START=0x08000000
+CONFIG_MEMORY_SIZE=0x01000000
+CONFIG_NOHIGHMEM=y
+# CONFIG_DISCONTIGMEM is not set
+CONFIG_RWSEM_GENERIC_SPINLOCK=y
+# CONFIG_RWSEM_XCHGADD_ALGORITHM is not set
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_PREEMPT=y
+# CONFIG_HAVE_DEC_LOCK is not set
+# CONFIG_SMP is not set
+
+#
+# Bus options (PCI, PCMCIA, EISA, MCA, ISA)
+#
+# CONFIG_PCI is not set
+# CONFIG_ISA is not set
+
+#
+# PCCARD (PCMCIA/CardBus) support
+#
+CONFIG_PCCARD=y
+# CONFIG_PCMCIA_DEBUG is not set
+CONFIG_PCMCIA=y
+
+#
+# PC-card bridges
+#
+# CONFIG_TCIC is not set
+# CONFIG_M32R_PCC is not set
+CONFIG_M32R_CFC=y
+CONFIG_M32R_CFC_NUM=1
+
+#
+# PCI Hotplug Support
+#
+
+#
+# Executable file formats
+#
+CONFIG_BINFMT_ELF=y
+# CONFIG_BINFMT_MISC is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_STANDALONE=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+# CONFIG_FW_LOADER is not set
+
+#
+# Memory Technology Devices (MTD)
+#
+# CONFIG_MTD is not set
+
+#
+# Parallel port support
+#
+# CONFIG_PARPORT is not set
+
+#
+# Plug and Play support
+#
+
+#
+# Block devices
+#
+# CONFIG_BLK_DEV_FD is not set
+# CONFIG_BLK_DEV_COW_COMMON is not set
+CONFIG_BLK_DEV_LOOP=y
+# CONFIG_BLK_DEV_CRYPTOLOOP is not set
+CONFIG_BLK_DEV_NBD=y
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_COUNT=16
+CONFIG_BLK_DEV_RAM_SIZE=4096
+# CONFIG_BLK_DEV_INITRD is not set
+CONFIG_INITRAMFS_SOURCE=""
+# CONFIG_CDROM_PKTCDVD is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+# CONFIG_IOSCHED_AS is not set
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+# CONFIG_ATA_OVER_ETH is not set
+
+#
+# ATA/ATAPI/MFM/RLL support
+#
+CONFIG_IDE=y
+CONFIG_BLK_DEV_IDE=y
+
+#
+# Please see Documentation/ide.txt for help/info on IDE drives
+#
+# CONFIG_BLK_DEV_IDE_SATA is not set
+CONFIG_BLK_DEV_IDEDISK=y
+# CONFIG_IDEDISK_MULTI_MODE is not set
+CONFIG_BLK_DEV_IDECS=y
+CONFIG_BLK_DEV_IDECD=m
+# CONFIG_BLK_DEV_IDETAPE is not set
+# CONFIG_BLK_DEV_IDEFLOPPY is not set
+# CONFIG_BLK_DEV_IDESCSI is not set
+# CONFIG_IDE_TASK_IOCTL is not set
+
+#
+# IDE chipset support/bugfixes
+#
+CONFIG_IDE_GENERIC=y
+# CONFIG_IDE_ARM is not set
+# CONFIG_BLK_DEV_IDEDMA is not set
+# CONFIG_IDEDMA_AUTO is not set
+# CONFIG_BLK_DEV_HD is not set
+
+#
+# SCSI device support
+#
+CONFIG_SCSI=m
+CONFIG_SCSI_PROC_FS=y
+
+#
+# SCSI support type (disk, tape, CD-ROM)
+#
+CONFIG_BLK_DEV_SD=m
+# CONFIG_CHR_DEV_ST is not set
+# CONFIG_CHR_DEV_OSST is not set
+CONFIG_BLK_DEV_SR=m
+# CONFIG_BLK_DEV_SR_VENDOR is not set
+CONFIG_CHR_DEV_SG=m
+
+#
+# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
+#
+CONFIG_SCSI_MULTI_LUN=y
+# CONFIG_SCSI_CONSTANTS is not set
+# CONFIG_SCSI_LOGGING is not set
+
+#
+# SCSI Transport Attributes
+#
+# CONFIG_SCSI_SPI_ATTRS is not set
+# CONFIG_SCSI_FC_ATTRS is not set
+# CONFIG_SCSI_ISCSI_ATTRS is not set
+
+#
+# SCSI low-level drivers
+#
+# CONFIG_SCSI_SATA is not set
+# CONFIG_SCSI_DEBUG is not set
+
+#
+# PCMCIA SCSI adapter support
+#
+# CONFIG_PCMCIA_AHA152X is not set
+# CONFIG_PCMCIA_FDOMAIN is not set
+# CONFIG_PCMCIA_NINJA_SCSI is not set
+# CONFIG_PCMCIA_QLOGIC is not set
+# CONFIG_PCMCIA_SYM53C500 is not set
+
+#
+# Multi-device support (RAID and LVM)
+#
+# CONFIG_MD is not set
+
+#
+# Fusion MPT device support
+#
+
+#
+# IEEE 1394 (FireWire) support
+#
+
+#
+# I2O device support
+#
+
+#
+# Networking support
+#
+CONFIG_NET=y
+
+#
+# Networking options
+#
+CONFIG_PACKET=y
+# CONFIG_PACKET_MMAP is not set
+# CONFIG_NETLINK_DEV is not set
+CONFIG_UNIX=y
+# CONFIG_NET_KEY is not set
+CONFIG_INET=y
+# CONFIG_IP_MULTICAST is not set
+# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_PNP=y
+CONFIG_IP_PNP_DHCP=y
+# CONFIG_IP_PNP_BOOTP is not set
+# CONFIG_IP_PNP_RARP is not set
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+# CONFIG_ARPD is not set
+# CONFIG_SYN_COOKIES is not set
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_TUNNEL is not set
+CONFIG_IP_TCPDIAG=y
+# CONFIG_IP_TCPDIAG_IPV6 is not set
+# CONFIG_IPV6 is not set
+# CONFIG_NETFILTER is not set
+
+#
+# SCTP Configuration (EXPERIMENTAL)
+#
+# CONFIG_IP_SCTP is not set
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_NET_DIVERT is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+
+#
+# QoS and/or fair queueing
+#
+# CONFIG_NET_SCHED is not set
+# CONFIG_NET_CLS_ROUTE is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+CONFIG_NETDEVICES=y
+# CONFIG_DUMMY is not set
+# CONFIG_BONDING is not set
+# CONFIG_EQUALIZER is not set
+# CONFIG_TUN is not set
+
+#
+# Ethernet (10 or 100Mbit)
+#
+CONFIG_NET_ETHERNET=y
+CONFIG_MII=y
+CONFIG_SMC91X=y
+# CONFIG_NE2000 is not set
+
+#
+# Ethernet (1000 Mbit)
+#
+
+#
+# Ethernet (10000 Mbit)
+#
+
+#
+# Token Ring devices
+#
+
+#
+# Wireless LAN (non-hamradio)
+#
+# CONFIG_NET_RADIO is not set
+
+#
+# PCMCIA network device support
+#
+# CONFIG_NET_PCMCIA is not set
+
+#
+# Wan interfaces
+#
+# CONFIG_WAN is not set
+# CONFIG_PPP is not set
+# CONFIG_SLIP is not set
+# CONFIG_SHAPER is not set
+# CONFIG_NETCONSOLE is not set
+
+#
+# ISDN subsystem
+#
+# CONFIG_ISDN is not set
+
+#
+# Telephony Support
+#
+# CONFIG_PHONE is not set
+
+#
+# Input device support
+#
+CONFIG_INPUT=y
+
+#
+# Userland interfaces
+#
+# CONFIG_INPUT_MOUSEDEV is not set
+# CONFIG_INPUT_JOYDEV is not set
+# CONFIG_INPUT_TSDEV is not set
+# CONFIG_INPUT_EVDEV is not set
+# CONFIG_INPUT_EVBUG is not set
+
+#
+# Input I/O drivers
+#
+# CONFIG_GAMEPORT is not set
+CONFIG_SOUND_GAMEPORT=y
+CONFIG_SERIO=y
+# CONFIG_SERIO_I8042 is not set
+CONFIG_SERIO_SERPORT=y
+# CONFIG_SERIO_CT82C710 is not set
+# CONFIG_SERIO_LIBPS2 is not set
+# CONFIG_SERIO_RAW is not set
+
+#
+# Input Device Drivers
+#
+# CONFIG_INPUT_KEYBOARD is not set
+# CONFIG_INPUT_MOUSE is not set
+# CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TOUCHSCREEN is not set
+# CONFIG_INPUT_MISC is not set
+
+#
+# Character devices
+#
+CONFIG_VT=y
+CONFIG_VT_CONSOLE=y
+CONFIG_HW_CONSOLE=y
+# CONFIG_SERIAL_NONSTANDARD is not set
+
+#
+# Serial drivers
+#
+# CONFIG_SERIAL_8250 is not set
+
+#
+# Non-8250 serial port support
+#
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+CONFIG_SERIAL_M32R_SIO=y
+CONFIG_SERIAL_M32R_SIO_CONSOLE=y
+CONFIG_SERIAL_M32R_PLDSIO=y
+CONFIG_UNIX98_PTYS=y
+CONFIG_LEGACY_PTYS=y
+CONFIG_LEGACY_PTY_COUNT=256
+
+#
+# IPMI
+#
+# CONFIG_IPMI_HANDLER is not set
+
+#
+# Watchdog Cards
+#
+# CONFIG_WATCHDOG is not set
+# CONFIG_RTC is not set
+# CONFIG_GEN_RTC is not set
+CONFIG_DS1302=y
+# CONFIG_DTLK is not set
+# CONFIG_R3964 is not set
+
+#
+# Ftape, the floppy tape device driver
+#
+# CONFIG_DRM is not set
+
+#
+# PCMCIA character devices
+#
+# CONFIG_SYNCLINK_CS is not set
+# CONFIG_RAW_DRIVER is not set
+
+#
+# I2C support
+#
+# CONFIG_I2C is not set
+
+#
+# Dallas's 1-wire bus
+#
+# CONFIG_W1 is not set
+
+#
+# Misc devices
+#
+
+#
+# Multimedia devices
+#
+CONFIG_VIDEO_DEV=y
+
+#
+# Video For Linux
+#
+
+#
+# Video Adapters
+#
+# CONFIG_VIDEO_CPIA is not set
+CONFIG_VIDEO_M32R_AR=y
+CONFIG_VIDEO_M32R_AR_M64278=y
+
+#
+# Radio Adapters
+#
+# CONFIG_RADIO_MAESTRO is not set
+
+#
+# Digital Video Broadcasting Devices
+#
+# CONFIG_DVB is not set
+
+#
+# Graphics support
+#
+CONFIG_FB=y
+# CONFIG_FB_MODE_HELPERS is not set
+# CONFIG_FB_TILEBLITTING is not set
+# CONFIG_FB_VIRTUAL is not set
+
+#
+# Console display driver support
+#
+# CONFIG_VGA_CONSOLE is not set
+CONFIG_DUMMY_CONSOLE=y
+CONFIG_FRAMEBUFFER_CONSOLE=y
+# CONFIG_FONTS is not set
+CONFIG_FONT_8x8=y
+CONFIG_FONT_8x16=y
+
+#
+# Logo configuration
+#
+CONFIG_LOGO=y
+CONFIG_LOGO_LINUX_MONO=y
+CONFIG_LOGO_LINUX_VGA16=y
+CONFIG_LOGO_LINUX_CLUT224=y
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+
+#
+# Sound
+#
+# CONFIG_SOUND is not set
+
+#
+# USB support
+#
+# CONFIG_USB_ARCH_HAS_HCD is not set
+# CONFIG_USB_ARCH_HAS_OHCI is not set
+
+#
+# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' may also be needed; see USB_STORAGE Help for more information
+#
+
+#
+# USB Gadget Support
+#
+# CONFIG_USB_GADGET is not set
+
+#
+# MMC/SD Card support
+#
+# CONFIG_MMC is not set
+
+#
+# InfiniBand support
+#
+# CONFIG_INFINIBAND is not set
+
+#
+# File systems
+#
+CONFIG_EXT2_FS=y
+# CONFIG_EXT2_FS_XATTR is not set
+CONFIG_EXT3_FS=m
+CONFIG_EXT3_FS_XATTR=y
+# CONFIG_EXT3_FS_POSIX_ACL is not set
+# CONFIG_EXT3_FS_SECURITY is not set
+CONFIG_JBD=m
+CONFIG_JBD_DEBUG=y
+CONFIG_FS_MBCACHE=y
+CONFIG_REISERFS_FS=m
+# CONFIG_REISERFS_CHECK is not set
+# CONFIG_REISERFS_PROC_INFO is not set
+# CONFIG_REISERFS_FS_XATTR is not set
+# CONFIG_JFS_FS is not set
+
+#
+# XFS support
+#
+# CONFIG_XFS_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_ROMFS_FS is not set
+# CONFIG_QUOTA is not set
+CONFIG_DNOTIFY=y
+# CONFIG_AUTOFS_FS is not set
+# CONFIG_AUTOFS4_FS is not set
+
+#
+# CD-ROM/DVD Filesystems
+#
+CONFIG_ISO9660_FS=m
+CONFIG_JOLIET=y
+# CONFIG_ZISOFS is not set
+CONFIG_UDF_FS=m
+CONFIG_UDF_NLS=y
+
+#
+# DOS/FAT/NT Filesystems
+#
+CONFIG_FAT_FS=m
+CONFIG_MSDOS_FS=m
+CONFIG_VFAT_FS=m
+CONFIG_FAT_DEFAULT_CODEPAGE=437
+CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
+# CONFIG_NTFS_FS is not set
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+CONFIG_PROC_KCORE=y
+CONFIG_SYSFS=y
+CONFIG_DEVFS_FS=y
+CONFIG_DEVFS_MOUNT=y
+# CONFIG_DEVFS_DEBUG is not set
+# CONFIG_DEVPTS_FS_XATTR is not set
+CONFIG_TMPFS=y
+# CONFIG_TMPFS_XATTR is not set
+# CONFIG_HUGETLB_PAGE is not set
+CONFIG_RAMFS=y
+
+#
+# Miscellaneous filesystems
+#
+# CONFIG_ADFS_FS is not set
+# CONFIG_AFFS_FS is not set
+# CONFIG_HFS_FS is not set
+# CONFIG_HFSPLUS_FS is not set
+# CONFIG_BEFS_FS is not set
+# CONFIG_BFS_FS is not set
+# CONFIG_EFS_FS is not set
+# CONFIG_CRAMFS is not set
+# CONFIG_VXFS_FS is not set
+# CONFIG_HPFS_FS is not set
+# CONFIG_QNX4FS_FS is not set
+# CONFIG_SYSV_FS is not set
+# CONFIG_UFS_FS is not set
+
+#
+# Network File Systems
+#
+CONFIG_NFS_FS=y
+CONFIG_NFS_V3=y
+# CONFIG_NFS_V4 is not set
+# CONFIG_NFS_DIRECTIO is not set
+# CONFIG_NFSD is not set
+CONFIG_ROOT_NFS=y
+CONFIG_LOCKD=y
+CONFIG_LOCKD_V4=y
+CONFIG_SUNRPC=y
+# CONFIG_RPCSEC_GSS_KRB5 is not set
+# CONFIG_RPCSEC_GSS_SPKM3 is not set
+# CONFIG_SMB_FS is not set
+# CONFIG_CIFS is not set
+# CONFIG_NCP_FS is not set
+# CONFIG_CODA_FS is not set
+# CONFIG_AFS_FS is not set
+
+#
+# Partition Types
+#
+# CONFIG_PARTITION_ADVANCED is not set
+CONFIG_MSDOS_PARTITION=y
+
+#
+# Native Language Support
+#
+CONFIG_NLS=y
+CONFIG_NLS_DEFAULT="iso8859-1"
+# CONFIG_NLS_CODEPAGE_437 is not set
+# CONFIG_NLS_CODEPAGE_737 is not set
+# CONFIG_NLS_CODEPAGE_775 is not set
+# CONFIG_NLS_CODEPAGE_850 is not set
+# CONFIG_NLS_CODEPAGE_852 is not set
+# CONFIG_NLS_CODEPAGE_855 is not set
+# CONFIG_NLS_CODEPAGE_857 is not set
+# CONFIG_NLS_CODEPAGE_860 is not set
+# CONFIG_NLS_CODEPAGE_861 is not set
+# CONFIG_NLS_CODEPAGE_862 is not set
+# CONFIG_NLS_CODEPAGE_863 is not set
+# CONFIG_NLS_CODEPAGE_864 is not set
+# CONFIG_NLS_CODEPAGE_865 is not set
+# CONFIG_NLS_CODEPAGE_866 is not set
+# CONFIG_NLS_CODEPAGE_869 is not set
+# CONFIG_NLS_CODEPAGE_936 is not set
+# CONFIG_NLS_CODEPAGE_950 is not set
+# CONFIG_NLS_CODEPAGE_932 is not set
+# CONFIG_NLS_CODEPAGE_949 is not set
+# CONFIG_NLS_CODEPAGE_874 is not set
+# CONFIG_NLS_ISO8859_8 is not set
+# CONFIG_NLS_CODEPAGE_1250 is not set
+# CONFIG_NLS_CODEPAGE_1251 is not set
+# CONFIG_NLS_ASCII is not set
+# CONFIG_NLS_ISO8859_1 is not set
+# CONFIG_NLS_ISO8859_2 is not set
+# CONFIG_NLS_ISO8859_3 is not set
+# CONFIG_NLS_ISO8859_4 is not set
+# CONFIG_NLS_ISO8859_5 is not set
+# CONFIG_NLS_ISO8859_6 is not set
+# CONFIG_NLS_ISO8859_7 is not set
+# CONFIG_NLS_ISO8859_9 is not set
+# CONFIG_NLS_ISO8859_13 is not set
+# CONFIG_NLS_ISO8859_14 is not set
+# CONFIG_NLS_ISO8859_15 is not set
+# CONFIG_NLS_KOI8_R is not set
+# CONFIG_NLS_KOI8_U is not set
+# CONFIG_NLS_UTF8 is not set
+
+#
+# Profiling support
+#
+# CONFIG_PROFILING is not set
+
+#
+# Kernel hacking
+#
+# CONFIG_DEBUG_KERNEL is not set
+CONFIG_DEBUG_PREEMPT=y
+# CONFIG_DEBUG_BUGVERBOSE is not set
+# CONFIG_FRAME_POINTER is not set
+
+#
+# Security options
+#
+# CONFIG_KEYS is not set
+# CONFIG_SECURITY is not set
+
+#
+# Cryptographic options
+#
+# CONFIG_CRYPTO is not set
+
+#
+# Hardware crypto devices
+#
+
+#
+# Library routines
+#
+# CONFIG_CRC_CCITT is not set
+CONFIG_CRC32=y
+# CONFIG_LIBCRC32C is not set
diff --git a/arch/m32r/m32700ut/dot.gdbinit_200MHz_16MB b/arch/m32r/m32700ut/dot.gdbinit_200MHz_16MB
new file mode 100644
index 0000000..525dab4
--- /dev/null
+++ b/arch/m32r/m32700ut/dot.gdbinit_200MHz_16MB
@@ -0,0 +1,249 @@
+# .gdbinit file
+# $Id: dot.gdbinit_200MHz_16MB,v 1.2 2004/10/20 03:02:27 fujiwara Exp $
+#-----
+# NOTE: this file is generated by a script, "gen_gdbinit.pl".
+# (Please type "gen_gdbinit.pl --help" and check the help message).
+# $ Id: gen_gdbinit.pl,v 1.12 2004/07/26 09:56:10 takata Exp $
+#-----
+# target platform: m32700ut
+
+# setting
+set width 0d70
+set radix 0d16
+
+debug_chaos
+
+# clk xin:cpu:bif:bus=25:200:50:50
+define clock_init
+  set *(unsigned long *)0x00ef4008 = 0x00000000
+  set *(unsigned long *)0x00ef4004 = 0
+  shell sleep 0.1
+  # NOTE: Please change the master clock source from PLL-clock to Xin-clock
+  # and switch off PLL, before resetting the clock gear ratio.
+
+  set *(unsigned long *)0x00ef4024 = 2
+  set *(unsigned long *)0x00ef4020 = 2
+  set *(unsigned long *)0x00ef4010 = 0
+  set *(unsigned long *)0x00ef4014 = 0
+  set *(unsigned long *)0x00ef4004 = 3
+  shell sleep 0.1
+  set *(unsigned long *)0x00ef4008 = 0x00000200
+end
+
+# Initialize SDRAM controller
+define sdram_init
+  # SDIR0
+  set *(unsigned long *)0x00ef6008 = 0x00000182
+  # SDIR1
+  set *(unsigned long *)0x00ef600c = 0x00000001
+  # Initialize wait
+  shell sleep 0.1
+  # Ch0-MOD
+  set *(unsigned long *)0x00ef602c = 0x00000020
+  # Ch0-TR
+  set *(unsigned long *)0x00ef6028 = 0x00041302
+  # Ch0-ADR (size:16MB)
+  set *(unsigned long *)0x00ef6020 = 0x08000002
+  # AutoRef On
+  set *(unsigned long *)0x00ef6004 = 0x00010517
+  # Access enable
+  set *(unsigned long *)0x00ef6024 = 0x00000001
+end
+document sdram_init
+  SDRAM controller initialization
+  0x08000000 - 0x08ffffff (16MB)
+end
+
+# Initialize BSEL3 for UT-CFC
+define cfc_init
+  set $sfrbase = 0xa0ef0000
+# too fast
+#  set *(unsigned long *)($sfrbase + 0x5300) = 0x0b0b8000
+#  set *(unsigned long *)($sfrbase + 0x5304) = 0x00102204
+#  set *(unsigned long *)($sfrbase + 0x5300) = 0x1f1f8000
+#  set *(unsigned long *)($sfrbase + 0x5300) = 0x1f1f1fdf
+#  set *(unsigned long *)($sfrbase + 0x5304) = 0x0013220f
+#  set *(unsigned long *)($sfrbase + 0x5304) = 0x0013330f
+end
+document cfc_init
+  CF controller initialization
+end
+
+# MMU enable
+define mmu_enable
+  set $evb=0x88000000
+  set *(unsigned long *)0xffff0024=1
+end
+
+# MMU disable
+define mmu_disable
+  set $evb=0
+  set *(unsigned long *)0xffff0024=0
+end
+
+# Show TLB entries
+define show_tlb_entries
+  set $i = 0
+  set $addr = $arg0
+  set $nr_entries = $arg1
+  use_mon_code
+  while ($i < $nr_entries)
+    set $tlb_tag = *(unsigned long*)$addr
+    set $tlb_data = *(unsigned long*)($addr + 4)
+    printf " [%2d] 0x%08lx : 0x%08lx - 0x%08lx\n", $i, $addr, $tlb_tag, $tlb_data
+    set $i = $i + 1
+    set $addr = $addr + 8
+  end
+  use_debug_dma
+end
+define itlb
+  set $itlb=0xfe000000
+  show_tlb_entries $itlb 0d32
+end
+define dtlb
+  set $dtlb=0xfe000800
+  show_tlb_entries $dtlb 0d32
+end
+
+# Initialize TLB entries
+define init_tlb_entries
+  set $i = 0
+  set $addr = $arg0
+  set $nr_entries = $arg1
+  use_mon_code
+  while ($i < $nr_entries)
+    set *(unsigned long *)($addr + 0x4) = 0
+    set $i = $i + 1
+    set $addr = $addr + 8
+  end
+  use_debug_dma
+end
+define tlb_init
+  set $itlb=0xfe000000
+  init_tlb_entries $itlb 0d32
+  set $dtlb=0xfe000800
+  init_tlb_entries $dtlb 0d32
+end
+
+# Show current task structure
+define show_current
+  set $current = $spi & 0xffffe000
+  printf "$current=0x%08lX\n",$current
+  print *(struct task_struct *)$current
+end
+
+# Show user assigned task structure
+define show_task
+  set  = $arg0 & 0xffffe000
+  printf "$task=0x%08lX\n",$task
+  print *(struct task_struct *)$task
+end
+document show_task
+  Show user assigned task structure
+  arg0 : task structure address
+end
+
+# Show M32R registers
+define show_regs
+  printf " R0[0x%08lX]   R1[0x%08lX]   R2[0x%08lX]   R3[0x%08lX]\n",$r0,$r1,$r2,$r3
+  printf " R4[0x%08lX]   R5[0x%08lX]   R6[0x%08lX]   R7[0x%08lX]\n",$r4,$r5,$r6,$r7
+  printf " R8[0x%08lX]   R9[0x%08lX]  R10[0x%08lX]  R11[0x%08lX]\n",$r8,$r9,$r10,$r11
+  printf "R12[0x%08lX]   FP[0x%08lX]   LR[0x%08lX]   SP[0x%08lX]\n",$r12,$fp,$lr,$sp
+  printf "PSW[0x%08lX]  CBR[0x%08lX]  SPI[0x%08lX]  SPU[0x%08lX]\n",$psw,$cbr,$spi,$spu
+  printf "BPC[0x%08lX]   PC[0x%08lX] ACCL[0x%08lX] ACCH[0x%08lX]\n",$bpc,$pc,$accl,$acch
+  printf "EVB[0x%08lX]\n",$evb
+end
+
+# Setup all
+define setup
+  use_mon_code
+  set *(unsigned int)0xfffffffc=0x60
+  shell sleep 0.1
+  clock_init
+  shell sleep 0.1
+  # SDRAM: 16MB
+  set *(unsigned long *)0x00ef6020 = 0x08000002
+  cfc_init
+  # USB
+  set *(unsigned short *)0xb0301000 = 0x100
+
+  set $evb=0x08000000
+end
+
+# Load modules
+define load_modules
+  use_debug_dma
+  load
+end
+
+# Set kernel parameters
+define set_kernel_parameters
+  set $param = (void*)0x08001000
+  # INITRD_START
+#  set *(unsigned long *)($param + 0x0010) = 0x08300000
+  # INITRD_SIZE
+#  set *(unsigned long *)($param + 0x0014) = 0x00000000
+  # M32R_CPUCLK
+  set *(unsigned long *)($param + 0x0018) = 0d200000000
+  # M32R_BUSCLK
+  set *(unsigned long *)($param + 0x001c) = 0d50000000
+
+  # M32R_TIMER_DIVIDE
+  set *(unsigned long *)($param + 0x0020) = 0d128
+
+  set {char[0x200]}($param + 0x100) = "console=ttyS0,115200n8x console=tty1 root=/dev/nfsroot nfsroot=192.168.0.1:/project/m32r-linux/export/rootfs,rsize=1024,wsize=1024 nfsaddrs=192.168.0.101:192.168.0.1:192.168.0.1:255.255.255.0:mappi001 mem=16M \0"
+end
+
+# Boot
+define boot
+  set_kernel_parameters
+  set $fp = 0
+  set $pc = 0x08002000
+# set *(unsigned char *)0xffffffff = 0x03
+  si
+  c
+end
+
+# Set breakpoints
+define set_breakpoints
+  b *0x08000030
+end
+
+# Restart
+define restart
+  sdireset
+  sdireset
+  set $pc = 0
+  b *0x04001000
+  b *0x08001000
+  b *0x08002000
+  si
+  c
+  tlb_init
+  del
+  setup
+  load_modules
+  boot
+end
+
+define si
+  stepi
+  x/i $pc
+  show_reg
+end
+
+sdireset
+sdireset
+file vmlinux
+target m32rsdi
+set $pc = 0
+b *0x04001000
+b *0x08001000
+b *0x08002000
+c
+tlb_init
+del
+setup
+load_modules
+boot
+
diff --git a/arch/m32r/m32700ut/dot.gdbinit_300MHz_32MB b/arch/m32r/m32700ut/dot.gdbinit_300MHz_32MB
new file mode 100644
index 0000000..aa50365
--- /dev/null
+++ b/arch/m32r/m32700ut/dot.gdbinit_300MHz_32MB
@@ -0,0 +1,249 @@
+# .gdbinit file
+# $Id: dot.gdbinit_300MHz_32MB,v 1.2 2004/10/20 03:02:27 fujiwara Exp $
+#-----
+# NOTE: this file is generated by a script, "gen_gdbinit.pl".
+# (Please type "gen_gdbinit.pl --help" and check the help message).
+# $ Id: gen_gdbinit.pl,v 1.12 2004/07/26 09:56:10 takata Exp $
+#-----
+# target platform: m32700ut
+
+# setting
+set width 0d70
+set radix 0d16
+
+debug_chaos
+
+# clk xin:cpu:bif:bus=25:300:75:75
+define clock_init
+  set *(unsigned long *)0x00ef4008 = 0x00000000
+  set *(unsigned long *)0x00ef4004 = 0
+  shell sleep 0.1
+  # NOTE: Please change the master clock source from PLL-clock to Xin-clock
+  # and switch off PLL, before resetting the clock gear ratio.
+
+  set *(unsigned long *)0x00ef4024 = 2
+  set *(unsigned long *)0x00ef4020 = 2
+  set *(unsigned long *)0x00ef4010 = 0
+  set *(unsigned long *)0x00ef4014 = 0
+  set *(unsigned long *)0x00ef4004 = 5
+  shell sleep 0.1
+  set *(unsigned long *)0x00ef4008 = 0x00000200
+end
+
+# Initialize SDRAM controller
+define sdram_init
+  # SDIR0
+  set *(unsigned long *)0x00ef6008 = 0x00000182
+  # SDIR1
+  set *(unsigned long *)0x00ef600c = 0x00000001
+  # Initialize wait
+  shell sleep 0.1
+  # Ch0-MOD
+  set *(unsigned long *)0x00ef602c = 0x00000020
+  # Ch0-TR
+  set *(unsigned long *)0x00ef6028 = 0x00051502
+  # Ch0-ADR (size:32MB)
+  set *(unsigned long *)0x00ef6020 = 0x08000003
+  # AutoRef On
+  set *(unsigned long *)0x00ef6004 = 0x00010e24
+  # Access enable
+  set *(unsigned long *)0x00ef6024 = 0x00000001
+end
+document sdram_init
+  SDRAM controller initialization
+  0x08000000 - 0x09ffffff (32MB)
+end
+
+# Initialize BSEL3 for UT-CFC
+define cfc_init
+  set $sfrbase = 0xa0ef0000
+# too fast
+#  set *(unsigned long *)($sfrbase + 0x5300) = 0x0b0b8000
+#  set *(unsigned long *)($sfrbase + 0x5304) = 0x00102204
+#  set *(unsigned long *)($sfrbase + 0x5300) = 0x1f1f8000
+#  set *(unsigned long *)($sfrbase + 0x5300) = 0x1f1f1fdf
+#  set *(unsigned long *)($sfrbase + 0x5304) = 0x0013220f
+#  set *(unsigned long *)($sfrbase + 0x5304) = 0x0013330f
+end
+document cfc_init
+  CF controller initialization
+end
+
+# MMU enable
+define mmu_enable
+  set $evb=0x88000000
+  set *(unsigned long *)0xffff0024=1
+end
+
+# MMU disable
+define mmu_disable
+  set $evb=0
+  set *(unsigned long *)0xffff0024=0
+end
+
+# Show TLB entries
+define show_tlb_entries
+  set $i = 0
+  set $addr = $arg0
+  set $nr_entries = $arg1
+  use_mon_code
+  while ($i < $nr_entries)
+    set $tlb_tag = *(unsigned long*)$addr
+    set $tlb_data = *(unsigned long*)($addr + 4)
+    printf " [%2d] 0x%08lx : 0x%08lx - 0x%08lx\n", $i, $addr, $tlb_tag, $tlb_data
+    set $i = $i + 1
+    set $addr = $addr + 8
+  end
+  use_debug_dma
+end
+define itlb
+  set $itlb=0xfe000000
+  show_tlb_entries $itlb 0d32
+end
+define dtlb
+  set $dtlb=0xfe000800
+  show_tlb_entries $dtlb 0d32
+end
+
+# Initialize TLB entries
+define init_tlb_entries
+  set $i = 0
+  set $addr = $arg0
+  set $nr_entries = $arg1
+  use_mon_code
+  while ($i < $nr_entries)
+    set *(unsigned long *)($addr + 0x4) = 0
+    set $i = $i + 1
+    set $addr = $addr + 8
+  end
+  use_debug_dma
+end
+define tlb_init
+  set $itlb=0xfe000000
+  init_tlb_entries $itlb 0d32
+  set $dtlb=0xfe000800
+  init_tlb_entries $dtlb 0d32
+end
+
+# Show current task structure
+define show_current
+  set $current = $spi & 0xffffe000
+  printf "$current=0x%08lX\n",$current
+  print *(struct task_struct *)$current
+end
+
+# Show user assigned task structure
+define show_task
+  set  = $arg0 & 0xffffe000
+  printf "$task=0x%08lX\n",$task
+  print *(struct task_struct *)$task
+end
+document show_task
+  Show user assigned task structure
+  arg0 : task structure address
+end
+
+# Show M32R registers
+define show_regs
+  printf " R0[0x%08lX]   R1[0x%08lX]   R2[0x%08lX]   R3[0x%08lX]\n",$r0,$r1,$r2,$r3
+  printf " R4[0x%08lX]   R5[0x%08lX]   R6[0x%08lX]   R7[0x%08lX]\n",$r4,$r5,$r6,$r7
+  printf " R8[0x%08lX]   R9[0x%08lX]  R10[0x%08lX]  R11[0x%08lX]\n",$r8,$r9,$r10,$r11
+  printf "R12[0x%08lX]   FP[0x%08lX]   LR[0x%08lX]   SP[0x%08lX]\n",$r12,$fp,$lr,$sp
+  printf "PSW[0x%08lX]  CBR[0x%08lX]  SPI[0x%08lX]  SPU[0x%08lX]\n",$psw,$cbr,$spi,$spu
+  printf "BPC[0x%08lX]   PC[0x%08lX] ACCL[0x%08lX] ACCH[0x%08lX]\n",$bpc,$pc,$accl,$acch
+  printf "EVB[0x%08lX]\n",$evb
+end
+
+# Setup all
+define setup
+  use_mon_code
+  set *(unsigned int)0xfffffffc=0x60
+  shell sleep 0.1
+  clock_init
+  shell sleep 0.1
+  # SDRAM: 32MB
+  set *(unsigned long *)0x00ef6020 = 0x08000003
+  cfc_init
+  # USB
+  set *(unsigned short *)0xb0301000 = 0x100
+
+  set $evb=0x08000000
+end
+
+# Load modules
+define load_modules
+  use_debug_dma
+  load
+end
+
+# Set kernel parameters
+define set_kernel_parameters
+  set $param = (void*)0x08001000
+  # INITRD_START
+#  set *(unsigned long *)($param + 0x0010) = 0x08300000
+  # INITRD_SIZE
+#  set *(unsigned long *)($param + 0x0014) = 0x00000000
+  # M32R_CPUCLK
+  set *(unsigned long *)($param + 0x0018) = 0d300000000
+  # M32R_BUSCLK
+  set *(unsigned long *)($param + 0x001c) = 0d75000000
+
+  # M32R_TIMER_DIVIDE
+  set *(unsigned long *)($param + 0x0020) = 0d128
+
+  set {char[0x200]}($param + 0x100) = "console=ttyS0,115200n8x console=tty1 root=/dev/nfsroot nfsroot=192.168.0.1:/project/m32r-linux/export/rootfs,rsize=1024,wsize=1024 nfsaddrs=192.168.0.101:192.168.0.1:192.168.0.1:255.255.255.0:mappi001 mem=32M \0"
+end
+
+# Boot
+define boot
+  set_kernel_parameters
+  set $fp = 0
+  set $pc = 0x08002000
+# set *(unsigned char *)0xffffffff = 0x03
+  si
+  c
+end
+
+# Set breakpoints
+define set_breakpoints
+  b *0x08000030
+end
+
+# Restart
+define restart
+  sdireset
+  sdireset
+  set $pc = 0
+  b *0x04001000
+  b *0x08001000
+  b *0x08002000
+  si
+  c
+  tlb_init
+  del
+  setup
+  load_modules
+  boot
+end
+
+define si
+  stepi
+  x/i $pc
+  show_reg
+end
+
+sdireset
+sdireset
+file vmlinux
+target m32rsdi
+set $pc = 0
+b *0x04001000
+b *0x08001000
+b *0x08002000
+c
+tlb_init
+del
+setup
+load_modules
+boot
+
diff --git a/arch/m32r/m32700ut/dot.gdbinit_400MHz_32MB b/arch/m32r/m32700ut/dot.gdbinit_400MHz_32MB
new file mode 100644
index 0000000..adc608a
--- /dev/null
+++ b/arch/m32r/m32700ut/dot.gdbinit_400MHz_32MB
@@ -0,0 +1,249 @@
+# .gdbinit file
+# $Id: dot.gdbinit_400MHz_32MB,v 1.1 2004/10/21 01:41:27 fujiwara Exp $
+#-----
+# NOTE: this file is generated by a script, "gen_gdbinit.pl".
+# (Please type "gen_gdbinit.pl --help" and check the help message).
+# $ Id: gen_gdbinit.pl,v 1.12 2004/07/26 09:56:10 takata Exp $
+#-----
+# target platform: m32700ut
+
+# setting
+set width 0d70
+set radix 0d16
+
+debug_chaos
+
+# clk xin:cpu:bif:bus=25:400:100:50
+define clock_init
+  set *(unsigned long *)0x00ef4008 = 0x00000000
+  set *(unsigned long *)0x00ef4004 = 0
+  shell sleep 0.1
+  # NOTE: Please change the master clock source from PLL-clock to Xin-clock
+  # and switch off PLL, before resetting the clock gear ratio.
+
+  set *(unsigned long *)0x00ef4024 = 3
+  set *(unsigned long *)0x00ef4020 = 2
+  set *(unsigned long *)0x00ef4010 = 0
+  set *(unsigned long *)0x00ef4014 = 0
+  set *(unsigned long *)0x00ef4004 = 7
+  shell sleep 0.1
+  set *(unsigned long *)0x00ef4008 = 0x00000200
+end
+
+# Initialize SDRAM controller
+define sdram_init
+  # SDIR0
+  set *(unsigned long *)0x00ef6008 = 0x00000182
+  # SDIR1
+  set *(unsigned long *)0x00ef600c = 0x00000001
+  # Initialize wait
+  shell sleep 0.1
+  # Ch0-MOD
+  set *(unsigned long *)0x00ef602c = 0x00000020
+  # Ch0-TR
+  set *(unsigned long *)0x00ef6028 = 0x00041302
+  # Ch0-ADR (size:32MB)
+  set *(unsigned long *)0x00ef6020 = 0x08000003
+  # AutoRef On
+  set *(unsigned long *)0x00ef6004 = 0x00010517
+  # Access enable
+  set *(unsigned long *)0x00ef6024 = 0x00000001
+end
+document sdram_init
+  SDRAM controller initialization
+  0x08000000 - 0x09ffffff (32MB)
+end
+
+# Initialize BSEL3 for UT-CFC
+define cfc_init
+  set $sfrbase = 0xa0ef0000
+# too fast
+#  set *(unsigned long *)($sfrbase + 0x5300) = 0x0b0b8000
+#  set *(unsigned long *)($sfrbase + 0x5304) = 0x00102204
+#  set *(unsigned long *)($sfrbase + 0x5300) = 0x1f1f8000
+#  set *(unsigned long *)($sfrbase + 0x5300) = 0x1f1f1fdf
+#  set *(unsigned long *)($sfrbase + 0x5304) = 0x0013220f
+#  set *(unsigned long *)($sfrbase + 0x5304) = 0x0013330f
+end
+document cfc_init
+  CF controller initialization
+end
+
+# MMU enable
+define mmu_enable
+  set $evb=0x88000000
+  set *(unsigned long *)0xffff0024=1
+end
+
+# MMU disable
+define mmu_disable
+  set $evb=0
+  set *(unsigned long *)0xffff0024=0
+end
+
+# Show TLB entries
+define show_tlb_entries
+  set $i = 0
+  set $addr = $arg0
+  set $nr_entries = $arg1
+  use_mon_code
+  while ($i < $nr_entries)
+    set $tlb_tag = *(unsigned long*)$addr
+    set $tlb_data = *(unsigned long*)($addr + 4)
+    printf " [%2d] 0x%08lx : 0x%08lx - 0x%08lx\n", $i, $addr, $tlb_tag, $tlb_data
+    set $i = $i + 1
+    set $addr = $addr + 8
+  end
+  use_debug_dma
+end
+define itlb
+  set $itlb=0xfe000000
+  show_tlb_entries $itlb 0d32
+end
+define dtlb
+  set $dtlb=0xfe000800
+  show_tlb_entries $dtlb 0d32
+end
+
+# Initialize TLB entries
+define init_tlb_entries
+  set $i = 0
+  set $addr = $arg0
+  set $nr_entries = $arg1
+  use_mon_code
+  while ($i < $nr_entries)
+    set *(unsigned long *)($addr + 0x4) = 0
+    set $i = $i + 1
+    set $addr = $addr + 8
+  end
+  use_debug_dma
+end
+define tlb_init
+  set $itlb=0xfe000000
+  init_tlb_entries $itlb 0d32
+  set $dtlb=0xfe000800
+  init_tlb_entries $dtlb 0d32
+end
+
+# Show current task structure
+define show_current
+  set $current = $spi & 0xffffe000
+  printf "$current=0x%08lX\n",$current
+  print *(struct task_struct *)$current
+end
+
+# Show user assigned task structure
+define show_task
+  set  = $arg0 & 0xffffe000
+  printf "$task=0x%08lX\n",$task
+  print *(struct task_struct *)$task
+end
+document show_task
+  Show user assigned task structure
+  arg0 : task structure address
+end
+
+# Show M32R registers
+define show_regs
+  printf " R0[0x%08lX]   R1[0x%08lX]   R2[0x%08lX]   R3[0x%08lX]\n",$r0,$r1,$r2,$r3
+  printf " R4[0x%08lX]   R5[0x%08lX]   R6[0x%08lX]   R7[0x%08lX]\n",$r4,$r5,$r6,$r7
+  printf " R8[0x%08lX]   R9[0x%08lX]  R10[0x%08lX]  R11[0x%08lX]\n",$r8,$r9,$r10,$r11
+  printf "R12[0x%08lX]   FP[0x%08lX]   LR[0x%08lX]   SP[0x%08lX]\n",$r12,$fp,$lr,$sp
+  printf "PSW[0x%08lX]  CBR[0x%08lX]  SPI[0x%08lX]  SPU[0x%08lX]\n",$psw,$cbr,$spi,$spu
+  printf "BPC[0x%08lX]   PC[0x%08lX] ACCL[0x%08lX] ACCH[0x%08lX]\n",$bpc,$pc,$accl,$acch
+  printf "EVB[0x%08lX]\n",$evb
+end
+
+# Setup all
+define setup
+  use_mon_code
+  set *(unsigned int)0xfffffffc=0x60
+  shell sleep 0.1
+  clock_init
+  shell sleep 0.1
+  # SDRAM: 32MB
+  set *(unsigned long *)0x00ef6020 = 0x08000003
+  cfc_init
+  # USB
+  set *(unsigned short *)0xb0301000 = 0x100
+
+  set $evb=0x08000000
+end
+
+# Load modules
+define load_modules
+  use_debug_dma
+  load
+end
+
+# Set kernel parameters
+define set_kernel_parameters
+  set $param = (void*)0x08001000
+  # INITRD_START
+#  set *(unsigned long *)($param + 0x0010) = 0x08300000
+  # INITRD_SIZE
+#  set *(unsigned long *)($param + 0x0014) = 0x00000000
+  # M32R_CPUCLK
+  set *(unsigned long *)($param + 0x0018) = 0d400000000
+  # M32R_BUSCLK
+  set *(unsigned long *)($param + 0x001c) = 0d50000000
+
+  # M32R_TIMER_DIVIDE
+  set *(unsigned long *)($param + 0x0020) = 0d128
+
+  set {char[0x200]}($param + 0x100) = "console=ttyS0,115200n8x console=tty1 root=/dev/nfsroot nfsroot=192.168.0.1:/project/m32r-linux/export/rootfs,rsize=1024,wsize=1024 nfsaddrs=192.168.0.101:192.168.0.1:192.168.0.1:255.255.255.0:mappi001 mem=32M \0"
+end
+
+# Boot
+define boot
+  set_kernel_parameters
+  set $fp = 0
+  set $pc = 0x08002000
+# set *(unsigned char *)0xffffffff = 0x03
+  si
+  c
+end
+
+# Set breakpoints
+define set_breakpoints
+  b *0x08000030
+end
+
+# Restart
+define restart
+  sdireset
+  sdireset
+  set $pc = 0
+  b *0x04001000
+  b *0x08001000
+  b *0x08002000
+  si
+  c
+  tlb_init
+  del
+  setup
+  load_modules
+  boot
+end
+
+define si
+  stepi
+  x/i $pc
+  show_reg
+end
+
+sdireset
+sdireset
+file vmlinux
+target m32rsdi
+set $pc = 0
+b *0x04001000
+b *0x08001000
+b *0x08002000
+c
+tlb_init
+del
+setup
+load_modules
+boot
+