i386: move mach-default

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

3 files changed, 6 insertions, 191 deletions

diff --git a/arch/i386/Makefile b/arch/i386/Makefile
index cbdc14f..223c5e2 100644
--- a/arch/i386/Makefile
+++ b/arch/i386/Makefile
@@ -61,7 +61,7 @@ AFLAGS += $(call as-instr,.cfi_startproc\n.cfi_signal_frame\n.cfi_endproc,-DCONF
 CFLAGS += $(cflags-y)
 
 # Default subarch .c files
-mcore-y  := arch/i386/mach-default
+mcore-y  := arch/x86/mach-default
 
 # Voyager subarch support
 mflags-$(CONFIG_X86_VOYAGER)	:= -Iinclude/asm-i386/mach-voyager
@@ -73,24 +73,24 @@ mcore-$(CONFIG_X86_VISWS)	:= arch/x86/mach-visws
 
 # NUMAQ subarch support
 mflags-$(CONFIG_X86_NUMAQ)	:= -Iinclude/asm-i386/mach-numaq
-mcore-$(CONFIG_X86_NUMAQ)	:= arch/i386/mach-default
+mcore-$(CONFIG_X86_NUMAQ)	:= arch/x86/mach-default
 
 # BIGSMP subarch support
 mflags-$(CONFIG_X86_BIGSMP)	:= -Iinclude/asm-i386/mach-bigsmp
-mcore-$(CONFIG_X86_BIGSMP)	:= arch/i386/mach-default
+mcore-$(CONFIG_X86_BIGSMP)	:= arch/x86/mach-default
 
 #Summit subarch support
 mflags-$(CONFIG_X86_SUMMIT) := -Iinclude/asm-i386/mach-summit
-mcore-$(CONFIG_X86_SUMMIT)  := arch/i386/mach-default
+mcore-$(CONFIG_X86_SUMMIT)  := arch/x86/mach-default
 
 # generic subarchitecture
 mflags-$(CONFIG_X86_GENERICARCH) := -Iinclude/asm-i386/mach-generic
-mcore-$(CONFIG_X86_GENERICARCH) := arch/i386/mach-default
+mcore-$(CONFIG_X86_GENERICARCH) := arch/x86/mach-default
 core-$(CONFIG_X86_GENERICARCH) += arch/x86/mach-generic/
 
 # ES7000 subarch support
 mflags-$(CONFIG_X86_ES7000)	:= -Iinclude/asm-i386/mach-es7000
-mcore-$(CONFIG_X86_ES7000)	:= arch/i386/mach-default
+mcore-$(CONFIG_X86_ES7000)	:= arch/x86/mach-default
 core-$(CONFIG_X86_ES7000)	:= arch/i386/mach-es7000/
 
 # Xen paravirtualization support
diff --git a/arch/i386/mach-default/Makefile b/arch/i386/mach-default/Makefile
deleted file mode 100644
index 012fe34..0000000
--- a/arch/i386/mach-default/Makefile
+++ /dev/null
@@ -1,5 +0,0 @@
-#
-# Makefile for the linux kernel.
-#
-
-obj-y				:= setup.o
diff --git a/arch/i386/mach-default/setup.c b/arch/i386/mach-default/setup.c
deleted file mode 100644
index 7f635c7..0000000
--- a/arch/i386/mach-default/setup.c
+++ /dev/null
@@ -1,180 +0,0 @@
-/*
- *	Machine specific setup for generic
- */
-
-#include <linux/smp.h>
-#include <linux/init.h>
-#include <linux/interrupt.h>
-#include <asm/acpi.h>
-#include <asm/arch_hooks.h>
-#include <asm/e820.h>
-#include <asm/setup.h>
-
-#ifdef CONFIG_HOTPLUG_CPU
-#define DEFAULT_SEND_IPI	(1)
-#else
-#define DEFAULT_SEND_IPI	(0)
-#endif
-
-int no_broadcast=DEFAULT_SEND_IPI;
-
-/**
- * pre_intr_init_hook - initialisation prior to setting up interrupt vectors
- *
- * Description:
- *	Perform any necessary interrupt initialisation prior to setting up
- *	the "ordinary" interrupt call gates.  For legacy reasons, the ISA
- *	interrupts should be initialised here if the machine emulates a PC
- *	in any way.
- **/
-void __init pre_intr_init_hook(void)
-{
-	init_ISA_irqs();
-}
-
-/*
- * IRQ2 is cascade interrupt to second interrupt controller
- */
-static struct irqaction irq2 = { no_action, 0, CPU_MASK_NONE, "cascade", NULL, NULL};
-
-/**
- * intr_init_hook - post gate setup interrupt initialisation
- *
- * Description:
- *	Fill in any interrupts that may have been left out by the general
- *	init_IRQ() routine.  interrupts having to do with the machine rather
- *	than the devices on the I/O bus (like APIC interrupts in intel MP
- *	systems) are started here.
- **/
-void __init intr_init_hook(void)
-{
-#ifdef CONFIG_X86_LOCAL_APIC
-	apic_intr_init();
-#endif
-
-	if (!acpi_ioapic)
-		setup_irq(2, &irq2);
-}
-
-/**
- * pre_setup_arch_hook - hook called prior to any setup_arch() execution
- *
- * Description:
- *	generally used to activate any machine specific identification
- *	routines that may be needed before setup_arch() runs.  On VISWS
- *	this is used to get the board revision and type.
- **/
-void __init pre_setup_arch_hook(void)
-{
-}
-
-/**
- * trap_init_hook - initialise system specific traps
- *
- * Description:
- *	Called as the final act of trap_init().  Used in VISWS to initialise
- *	the various board specific APIC traps.
- **/
-void __init trap_init_hook(void)
-{
-}
-
-static struct irqaction irq0  = {
-	.handler = timer_interrupt,
-	.flags = IRQF_DISABLED | IRQF_NOBALANCING | IRQF_IRQPOLL,
-	.mask = CPU_MASK_NONE,
-	.name = "timer"
-};
-
-/**
- * time_init_hook - do any specific initialisations for the system timer.
- *
- * Description:
- *	Must plug the system timer interrupt source at HZ into the IRQ listed
- *	in irq_vectors.h:TIMER_IRQ
- **/
-void __init time_init_hook(void)
-{
-	irq0.mask = cpumask_of_cpu(0);
-	setup_irq(0, &irq0);
-}
-
-#ifdef CONFIG_MCA
-/**
- * mca_nmi_hook - hook into MCA specific NMI chain
- *
- * Description:
- *	The MCA (Microchannel Arcitecture) has an NMI chain for NMI sources
- *	along the MCA bus.  Use this to hook into that chain if you will need
- *	it.
- **/
-void mca_nmi_hook(void)
-{
-	/* If I recall correctly, there's a whole bunch of other things that
-	 * we can do to check for NMI problems, but that's all I know about
-	 * at the moment.
-	 */
-
-	printk("NMI generated from unknown source!\n");
-}
-#endif
-
-static __init int no_ipi_broadcast(char *str)
-{
-	get_option(&str, &no_broadcast);
-	printk ("Using %s mode\n", no_broadcast ? "No IPI Broadcast" :
-											"IPI Broadcast");
-	return 1;
-}
-
-__setup("no_ipi_broadcast", no_ipi_broadcast);
-
-static int __init print_ipi_mode(void)
-{
-	printk ("Using IPI %s mode\n", no_broadcast ? "No-Shortcut" :
-											"Shortcut");
-	return 0;
-}
-
-late_initcall(print_ipi_mode);
-
-/**
- * machine_specific_memory_setup - Hook for machine specific memory setup.
- *
- * Description:
- *	This is included late in kernel/setup.c so that it can make
- *	use of all of the static functions.
- **/
-
-char * __init machine_specific_memory_setup(void)
-{
-	char *who;
-
-
-	who = "BIOS-e820";
-
-	/*
-	 * Try to copy the BIOS-supplied E820-map.
-	 *
-	 * Otherwise fake a memory map; one section from 0k->640k,
-	 * the next section from 1mb->appropriate_mem_k
-	 */
-	sanitize_e820_map(E820_MAP, &E820_MAP_NR);
-	if (copy_e820_map(E820_MAP, E820_MAP_NR) < 0) {
-		unsigned long mem_size;
-
-		/* compare results from other methods and take the greater */
-		if (ALT_MEM_K < EXT_MEM_K) {
-			mem_size = EXT_MEM_K;
-			who = "BIOS-88";
-		} else {
-			mem_size = ALT_MEM_K;
-			who = "BIOS-e801";
-		}
-
-		e820.nr_map = 0;
-		add_memory_region(0, LOWMEMSIZE(), E820_RAM);
-		add_memory_region(HIGH_MEMORY, mem_size << 10, E820_RAM);
-  	}
-	return who;
-}