[PATCH] i386: mark cpu init functions as __cpuinit, data as __cpuinitdata

Mark i386-specific cpu init functions as __cpuinit. They are all
only called from arch/i386/common.c:identify_cpu() that already is marked as
__cpuinit. This patch also removes the empty function init_umc().

Signed-off-by: Magnus Damm <magnus@valinux.co.jp>
Signed-off-by: Andi Kleen <ak@suse.de>

1 files changed, 16 insertions, 16 deletions

diff --git a/arch/i386/kernel/cpu/cyrix.c b/arch/i386/kernel/cpu/cyrix.c
index c2a0da9..d34b1bd 100644
--- a/arch/i386/kernel/cpu/cyrix.c
+++ b/arch/i386/kernel/cpu/cyrix.c
@@ -52,25 +52,25 @@ static void __init do_cyrix_devid(unsigned char *dir0, unsigned char *dir1)
  * Actually since bugs.h doesn't even reference this perhaps someone should
  * fix the documentation ???
  */
-static unsigned char Cx86_dir0_msb __initdata = 0;
+static unsigned char Cx86_dir0_msb __cpuinitdata = 0;
 
-static char Cx86_model[][9] __initdata = {
+static char Cx86_model[][9] __cpuinitdata = {
 	"Cx486", "Cx486", "5x86 ", "6x86", "MediaGX ", "6x86MX ",
 	"M II ", "Unknown"
 };
-static char Cx486_name[][5] __initdata = {
+static char Cx486_name[][5] __cpuinitdata = {
 	"SLC", "DLC", "SLC2", "DLC2", "SRx", "DRx",
 	"SRx2", "DRx2"
 };
-static char Cx486S_name[][4] __initdata = {
+static char Cx486S_name[][4] __cpuinitdata = {
 	"S", "S2", "Se", "S2e"
 };
-static char Cx486D_name[][4] __initdata = {
+static char Cx486D_name[][4] __cpuinitdata = {
 	"DX", "DX2", "?", "?", "?", "DX4"
 };
-static char Cx86_cb[] __initdata = "?.5x Core/Bus Clock";
-static char cyrix_model_mult1[] __initdata = "12??43";
-static char cyrix_model_mult2[] __initdata = "12233445";
+static char Cx86_cb[] __cpuinitdata = "?.5x Core/Bus Clock";
+static char cyrix_model_mult1[] __cpuinitdata = "12??43";
+static char cyrix_model_mult2[] __cpuinitdata = "12233445";
 
 /*
  * Reset the slow-loop (SLOP) bit on the 686(L) which is set by some old
@@ -82,7 +82,7 @@ static char cyrix_model_mult2[] __initdata = "12233445";
 
 extern void calibrate_delay(void) __init;
 
-static void __init check_cx686_slop(struct cpuinfo_x86 *c)
+static void __cpuinit check_cx686_slop(struct cpuinfo_x86 *c)
 {
 	unsigned long flags;
 	
@@ -107,7 +107,7 @@ static void __init check_cx686_slop(struct cpuinfo_x86 *c)
 }
 
 
-static void __init set_cx86_reorder(void)
+static void __cpuinit set_cx86_reorder(void)
 {
 	u8 ccr3;
 
@@ -122,7 +122,7 @@ static void __init set_cx86_reorder(void)
 	setCx86(CX86_CCR3, ccr3);
 }
 
-static void __init set_cx86_memwb(void)
+static void __cpuinit set_cx86_memwb(void)
 {
 	u32 cr0;
 
@@ -137,7 +137,7 @@ static void __init set_cx86_memwb(void)
 	setCx86(CX86_CCR2, getCx86(CX86_CCR2) | 0x14 );
 }
 
-static void __init set_cx86_inc(void)
+static void __cpuinit set_cx86_inc(void)
 {
 	unsigned char ccr3;
 
@@ -158,7 +158,7 @@ static void __init set_cx86_inc(void)
  *	Configure later MediaGX and/or Geode processor.
  */
 
-static void __init geode_configure(void)
+static void __cpuinit geode_configure(void)
 {
 	unsigned long flags;
 	u8 ccr3, ccr4;
@@ -184,14 +184,14 @@ static void __init geode_configure(void)
 
 
 #ifdef CONFIG_PCI
-static struct pci_device_id __initdata cyrix_55x0[] = {
+static struct pci_device_id __cpuinitdata cyrix_55x0[] = {
 	{ PCI_DEVICE(PCI_VENDOR_ID_CYRIX, PCI_DEVICE_ID_CYRIX_5510) },
 	{ PCI_DEVICE(PCI_VENDOR_ID_CYRIX, PCI_DEVICE_ID_CYRIX_5520) },
 	{ },
 };
 #endif
 
-static void __init init_cyrix(struct cpuinfo_x86 *c)
+static void __cpuinit init_cyrix(struct cpuinfo_x86 *c)
 {
 	unsigned char dir0, dir0_msn, dir0_lsn, dir1 = 0;
 	char *buf = c->x86_model_id;
@@ -346,7 +346,7 @@ static void __init init_cyrix(struct cpuinfo_x86 *c)
 /*
  * Handle National Semiconductor branded processors
  */
-static void __init init_nsc(struct cpuinfo_x86 *c)
+static void __cpuinit init_nsc(struct cpuinfo_x86 *c)
 {
 	/* There may be GX1 processors in the wild that are branded
 	 * NSC and not Cyrix.