Merge tag 'cris-for-4.1' of git://git.kernel.org/pub/scm/linux/kernel/git/jesper/cris

Pull arch/cris updates from Jesper Nilsson:
 "Some much needed love for the CRIS-port.

  There's a bunch of changes this time, giving the CRISv32 port a bit of
  modern makeover with device-tree, irq domain and gpiolib support, and
  more switchover to generic frameworks.

  Some small fixes and removal of the theoretical SMP support brings up
  the rear"

* tag 'cris-for-4.1' of git://git.kernel.org/pub/scm/linux/kernel/git/jesper/cris:
  cris: fix integer overflow in ELF_ET_DYN_BASE
  CRISv32: use GENERIC_SCHED_CLOCK
  CRISv32: use MMIO clocksource
  CRISv32: use generic clockevents
  CRIS: use generic headers via Kbuild
  CRIS: use generic cmpxchg.h
  CRIS: use generic atomic.h
  CRIS: use generic atomic bitops
  CRISv10: remove redundant macros from system.h
  CRIS: remove SMP code
  CRISv32: don't enable irqs in INIT_THREAD
  CRISv32: handle multiple signals
  CRISv32: prevent bogus restarts on sigreturn
  CRISv32: don't attempt syscall restart on irq exit
  Add binding documentation for CRIS
  CRIS: add Axis 88 board device tree
  CRISv32: add device tree support
  CRISv32: add irq domains support
  CRIS: enable GPIOLIB

12 files changed, 136 insertions, 575 deletions

diff --git a/arch/cris/arch-v32/kernel/Makefile b/arch/cris/arch-v32/kernel/Makefile
index 4035835..d9fc617 100644
--- a/arch/cris/arch-v32/kernel/Makefile
+++ b/arch/cris/arch-v32/kernel/Makefile
@@ -9,7 +9,6 @@ obj-y   := entry.o traps.o irq.o debugport.o \
 	   process.o ptrace.o setup.o signal.o traps.o time.o \
 	   cache.o cacheflush.o
 
-obj-$(CONFIG_SMP) += smp.o
 obj-$(CONFIG_ETRAX_KGDB) += kgdb.o kgdb_asm.o
 obj-$(CONFIG_ETRAX_FAST_TIMER) += fasttimer.o
 obj-$(CONFIG_MODULES)    += crisksyms.o
diff --git a/arch/cris/arch-v32/kernel/entry.S b/arch/cris/arch-v32/kernel/entry.S
index 2f19ac6..026a0b2 100644
--- a/arch/cris/arch-v32/kernel/entry.S
+++ b/arch/cris/arch-v32/kernel/entry.S
@@ -99,6 +99,8 @@ ret_from_kernel_thread:
 
 	.type	ret_from_intr,@function
 ret_from_intr:
+	moveq	0, $r9			; not a syscall
+
 	;; Check for resched if preemptive kernel, or if we're going back to
 	;; user-mode. This test matches the user_regs(regs) macro. Don't simply
 	;; test CCS since that doesn't necessarily reflect what mode we'll
@@ -145,7 +147,7 @@ system_call:
 	;; Stack-frame similar to the irq heads, which is reversed in
 	;; ret_from_sys_call.
 
-	sub.d	92, $sp		; Skip EXS and EDA.
+	sub.d	92, $sp		; Skip EDA.
 	movem	$r13, [$sp]
 	move.d	$sp, $r8
 	addq	14*4, $r8
@@ -156,8 +158,9 @@ system_call:
 	move	$ccs, $r4
 	move	$srp, $r5
 	move	$erp, $r6
+	move.d	$r9, $r7	; Store syscall number in EXS
 	subq	4, $sp
-	movem	$r6, [$r8]
+	movem	$r7, [$r8]
 	ei			; Enable interrupts while processing syscalls.
 	move.d	$r10, [$sp]
 
@@ -278,43 +281,14 @@ _syscall_exit_work:
 	.type	_work_pending,@function
 _work_pending:
 	addoq	+TI_flags, $r0, $acr
-	move.d	[$acr], $r10
-	btstq	TIF_NEED_RESCHED, $r10	; Need resched?
-	bpl	_work_notifysig		; No, must be signal/notify.
-	nop
-	.size	_work_pending, . - _work_pending
-
-	.type	_work_resched,@function
-_work_resched:
-	move.d	$r9, $r1		; Preserve R9.
-	jsr	schedule
-	nop
-	move.d	$r1, $r9
-	di
-
-	addoq	+TI_flags, $r0, $acr
-	move.d	[$acr], $r1
-	and.d	_TIF_WORK_MASK, $r1	; Ignore sycall trace counter.
-	beq	_Rexit
-	nop
-	btstq	TIF_NEED_RESCHED, $r1
-	bmi	_work_resched		; current->work.need_resched.
-	nop
-	.size	_work_resched, . - _work_resched
-
-	.type	_work_notifysig,@function
-_work_notifysig:
-	;; Deal with pending signals and notify-resume requests.
-
-	addoq	+TI_flags, $r0, $acr
 	move.d	[$acr], $r12		; The thread_info_flags parameter.
 	move.d	$sp, $r11		; The regs param.
-	jsr	do_notify_resume
-	move.d	$r9, $r10		; do_notify_resume syscall/irq param.
+	jsr	do_work_pending
+	move.d	$r9, $r10		; The syscall/irq param.
 
 	ba _Rexit
 	nop
-	.size	_work_notifysig, . - _work_notifysig
+	.size	_work_pending, . - _work_pending
 
 	;; We get here as a sidetrack when we've entered a syscall with the
 	;; trace-bit set. We need to call do_syscall_trace and then continue
diff --git a/arch/cris/arch-v32/kernel/head.S b/arch/cris/arch-v32/kernel/head.S
index 51e3416..74a66e0 100644
--- a/arch/cris/arch-v32/kernel/head.S
+++ b/arch/cris/arch-v32/kernel/head.S
@@ -52,11 +52,6 @@ tstart:
 
 	GIO_INIT
 
-#ifdef CONFIG_SMP
-secondary_cpu_entry: /* Entry point for secondary CPUs */
-	di
-#endif
-
 	;; Setup and enable the MMU. Use same configuration for both the data
 	;; and the instruction MMU.
 	;;
@@ -164,33 +159,6 @@ secondary_cpu_entry: /* Entry point for secondary CPUs */
 	nop
 	nop
 
-#ifdef CONFIG_SMP
-	;; Read CPU ID
-	move    0, $srs
-	nop
-	nop
-	nop
-	move    $s12, $r0
-	cmpq    0, $r0
-	beq	master_cpu
-	nop
-slave_cpu:
-	; Time to boot-up. Get stack location provided by master CPU.
-	move.d  smp_init_current_idle_thread, $r1
-	move.d  [$r1], $sp
-	add.d	8192, $sp
-	move.d	ebp_start, $r0	; Defined in linker-script.
-	move	$r0, $ebp
-	jsr	smp_callin
-	nop
-master_cpu:
-	/* Set up entry point for secondary CPUs. The boot ROM has set up
-	 * EBP at start of internal memory. The CPU will get there
-	 * later when we issue an IPI to them... */
-	move.d MEM_INTMEM_START + IPI_INTR_VECT * 4, $r0
-	move.d secondary_cpu_entry, $r1
-	move.d $r1, [$r0]
-#endif
 	; Check if starting from DRAM (network->RAM boot or unpacked
 	; compressed kernel), or directly from flash.
 	lapcq	., $r0
diff --git a/arch/cris/arch-v32/kernel/irq.c b/arch/cris/arch-v32/kernel/irq.c
index 25437ae..6a881e0 100644
--- a/arch/cris/arch-v32/kernel/irq.c
+++ b/arch/cris/arch-v32/kernel/irq.c
@@ -10,6 +10,8 @@
 #include <linux/errno.h>
 #include <linux/init.h>
 #include <linux/profile.h>
+#include <linux/of.h>
+#include <linux/of_irq.h>
 #include <linux/proc_fs.h>
 #include <linux/seq_file.h>
 #include <linux/threads.h>
@@ -56,9 +58,6 @@ struct cris_irq_allocation irq_allocations[NR_REAL_IRQS] =
 static unsigned long irq_regs[NR_CPUS] =
 {
   regi_irq,
-#ifdef CONFIG_SMP
-  regi_irq2,
-#endif
 };
 
 #if NR_REAL_IRQS > 32
@@ -431,6 +430,19 @@ crisv32_do_multiple(struct pt_regs* regs)
 	irq_exit();
 }
 
+static int crisv32_irq_map(struct irq_domain *h, unsigned int virq,
+			   irq_hw_number_t hw_irq_num)
+{
+	irq_set_chip_and_handler(virq, &crisv32_irq_type, handle_simple_irq);
+
+	return 0;
+}
+
+static struct irq_domain_ops crisv32_irq_ops = {
+	.map	= crisv32_irq_map,
+	.xlate	= irq_domain_xlate_onecell,
+};
+
 /*
  * This is called by start_kernel. It fixes the IRQ masks and setup the
  * interrupt vector table to point to bad_interrupt pointers.
@@ -441,6 +453,8 @@ init_IRQ(void)
 	int i;
 	int j;
 	reg_intr_vect_rw_mask vect_mask = {0};
+	struct device_node *np;
+	struct irq_domain *domain;
 
 	/* Clear all interrupts masks. */
 	for (i = 0; i < NBR_REGS; i++)
@@ -449,10 +463,15 @@ init_IRQ(void)
 	for (i = 0; i < 256; i++)
 		etrax_irv->v[i] = weird_irq;
 
-	/* Point all IRQ's to bad handlers. */
+	np = of_find_compatible_node(NULL, NULL, "axis,crisv32-intc");
+	domain = irq_domain_add_legacy(np, NR_IRQS - FIRST_IRQ,
+				       FIRST_IRQ, FIRST_IRQ,
+				       &crisv32_irq_ops, NULL);
+	BUG_ON(!domain);
+	irq_set_default_host(domain);
+	of_node_put(np);
+
 	for (i = FIRST_IRQ, j = 0; j < NR_IRQS; i++, j++) {
-		irq_set_chip_and_handler(j, &crisv32_irq_type,
-					 handle_simple_irq);
 		set_exception_vector(i, interrupt[j]);
 	}
 
diff --git a/arch/cris/arch-v32/kernel/setup.c b/arch/cris/arch-v32/kernel/setup.c
index 81715c6..cd1865d 100644
--- a/arch/cris/arch-v32/kernel/setup.c
+++ b/arch/cris/arch-v32/kernel/setup.c
@@ -63,11 +63,6 @@ int show_cpuinfo(struct seq_file *m, void *v)
 
 	info = &cpinfo[ARRAY_SIZE(cpinfo) - 1];
 
-#ifdef CONFIG_SMP
-	if (!cpu_online(cpu))
-		return 0;
-#endif
-
 	revision = rdvr();
 
 	for (i = 0; i < ARRAY_SIZE(cpinfo); i++) {
diff --git a/arch/cris/arch-v32/kernel/signal.c b/arch/cris/arch-v32/kernel/signal.c
index 0c9ce9e..3a36ae6 100644
--- a/arch/cris/arch-v32/kernel/signal.c
+++ b/arch/cris/arch-v32/kernel/signal.c
@@ -72,6 +72,9 @@ restore_sigcontext(struct pt_regs *regs, struct sigcontext __user *sc)
 	/* Make that the user-mode flag is set. */
 	regs->ccs |= (1 << (U_CCS_BITNR + CCS_SHIFT));
 
+	/* Don't perform syscall restarting */
+	regs->exs = -1;
+
 	/* Restore the old USP. */
 	err |= __get_user(old_usp, &sc->usp);
 	wrusp(old_usp);
@@ -425,6 +428,8 @@ do_signal(int canrestart, struct pt_regs *regs)
 {
 	struct ksignal ksig;
 
+	canrestart = canrestart && ((int)regs->exs >= 0);
+
 	/*
 	 * The common case should go fast, which is why this point is
 	 * reached from kernel-mode. If that's the case, just return
diff --git a/arch/cris/arch-v32/kernel/smp.c b/arch/cris/arch-v32/kernel/smp.c
deleted file mode 100644
index 0698582..0000000
--- a/arch/cris/arch-v32/kernel/smp.c
+++ /dev/null
@@ -1,358 +0,0 @@
-#include <linux/types.h>
-#include <asm/delay.h>
-#include <irq.h>
-#include <hwregs/intr_vect.h>
-#include <hwregs/intr_vect_defs.h>
-#include <asm/tlbflush.h>
-#include <asm/mmu_context.h>
-#include <hwregs/asm/mmu_defs_asm.h>
-#include <hwregs/supp_reg.h>
-#include <linux/atomic.h>
-
-#include <linux/err.h>
-#include <linux/init.h>
-#include <linux/timex.h>
-#include <linux/sched.h>
-#include <linux/kernel.h>
-#include <linux/cpumask.h>
-#include <linux/interrupt.h>
-#include <linux/module.h>
-
-#define IPI_SCHEDULE 1
-#define IPI_CALL 2
-#define IPI_FLUSH_TLB 4
-#define IPI_BOOT 8
-
-#define FLUSH_ALL (void*)0xffffffff
-
-/* Vector of locks used for various atomic operations */
-spinlock_t cris_atomic_locks[] = {
-	[0 ... LOCK_COUNT - 1] = __SPIN_LOCK_UNLOCKED(cris_atomic_locks)
-};
-
-/* CPU masks */
-cpumask_t phys_cpu_present_map = CPU_MASK_NONE;
-EXPORT_SYMBOL(phys_cpu_present_map);
-
-/* Variables used during SMP boot */
-volatile int cpu_now_booting = 0;
-volatile struct thread_info *smp_init_current_idle_thread;
-
-/* Variables used during IPI */
-static DEFINE_SPINLOCK(call_lock);
-static DEFINE_SPINLOCK(tlbstate_lock);
-
-struct call_data_struct {
-	void (*func) (void *info);
-	void *info;
-	int wait;
-};
-
-static struct call_data_struct * call_data;
-
-static struct mm_struct* flush_mm;
-static struct vm_area_struct* flush_vma;
-static unsigned long flush_addr;
-
-/* Mode registers */
-static unsigned long irq_regs[NR_CPUS] = {
-  regi_irq,
-  regi_irq2
-};
-
-static irqreturn_t crisv32_ipi_interrupt(int irq, void *dev_id);
-static int send_ipi(int vector, int wait, cpumask_t cpu_mask);
-static struct irqaction irq_ipi  = {
-	.handler = crisv32_ipi_interrupt,
-	.flags = 0,
-	.name = "ipi",
-};
-
-extern void cris_mmu_init(void);
-extern void cris_timer_init(void);
-
-/* SMP initialization */
-void __init smp_prepare_cpus(unsigned int max_cpus)
-{
-	int i;
-
-	/* From now on we can expect IPIs so set them up */
-	setup_irq(IPI_INTR_VECT, &irq_ipi);
-
-	/* Mark all possible CPUs as present */
-	for (i = 0; i < max_cpus; i++)
-		cpumask_set_cpu(i, &phys_cpu_present_map);
-}
-
-void smp_prepare_boot_cpu(void)
-{
-	/* PGD pointer has moved after per_cpu initialization so
-	 * update the MMU.
-	 */
-  	pgd_t **pgd;
-	pgd = (pgd_t**)&per_cpu(current_pgd, smp_processor_id());
-
-	SUPP_BANK_SEL(1);
-	SUPP_REG_WR(RW_MM_TLB_PGD, pgd);
-	SUPP_BANK_SEL(2);
-	SUPP_REG_WR(RW_MM_TLB_PGD, pgd);
-
-	set_cpu_online(0, true);
-	cpumask_set_cpu(0, &phys_cpu_present_map);
-	set_cpu_possible(0, true);
-}
-
-void __init smp_cpus_done(unsigned int max_cpus)
-{
-}
-
-/* Bring one cpu online.*/
-static int __init
-smp_boot_one_cpu(int cpuid, struct task_struct idle)
-{
-	unsigned timeout;
-	cpumask_t cpu_mask;
-
-	cpumask_clear(&cpu_mask);
-	task_thread_info(idle)->cpu = cpuid;
-
-	/* Information to the CPU that is about to boot */
-	smp_init_current_idle_thread = task_thread_info(idle);
-	cpu_now_booting = cpuid;
-
-	/* Kick it */
-	set_cpu_online(cpuid, true);
-	cpumask_set_cpu(cpuid, &cpu_mask);
-	send_ipi(IPI_BOOT, 0, cpu_mask);
-	set_cpu_online(cpuid, false);
-
-	/* Wait for CPU to come online */
-	for (timeout = 0; timeout < 10000; timeout++) {
-		if(cpu_online(cpuid)) {
-			cpu_now_booting = 0;
-			smp_init_current_idle_thread = NULL;
-			return 0; /* CPU online */
-		}
-		udelay(100);
-		barrier();
-	}
-
-	printk(KERN_CRIT "SMP: CPU:%d is stuck.\n", cpuid);
-	return -1;
-}
-
-/* Secondary CPUs starts using C here. Here we need to setup CPU
- * specific stuff such as the local timer and the MMU. */
-void __init smp_callin(void)
-{
-	int cpu = cpu_now_booting;
-	reg_intr_vect_rw_mask vect_mask = {0};
-
-	/* Initialise the idle task for this CPU */
-	atomic_inc(&init_mm.mm_count);
-	current->active_mm = &init_mm;
-
-	/* Set up MMU */
-	cris_mmu_init();
-	__flush_tlb_all();
-
-	/* Setup local timer. */
-	cris_timer_init();
-
-	/* Enable IRQ and idle */
-	REG_WR(intr_vect, irq_regs[cpu], rw_mask, vect_mask);
-	crisv32_unmask_irq(IPI_INTR_VECT);
-	crisv32_unmask_irq(TIMER0_INTR_VECT);
-	preempt_disable();
-	notify_cpu_starting(cpu);
-	local_irq_enable();
-
-	set_cpu_online(cpu, true);
-	cpu_startup_entry(CPUHP_ONLINE);
-}
-
-/* Stop execution on this CPU.*/
-void stop_this_cpu(void* dummy)
-{
-	local_irq_disable();
-	asm volatile("halt");
-}
-
-/* Other calls */
-void smp_send_stop(void)
-{
-	smp_call_function(stop_this_cpu, NULL, 0);
-}
-
-int setup_profiling_timer(unsigned int multiplier)
-{
-	return -EINVAL;
-}
-
-
-/* cache_decay_ticks is used by the scheduler to decide if a process
- * is "hot" on one CPU. A higher value means a higher penalty to move
- * a process to another CPU. Our cache is rather small so we report
- * 1 tick.
- */
-unsigned long cache_decay_ticks = 1;
-
-int __cpu_up(unsigned int cpu, struct task_struct *tidle)
-{
-	smp_boot_one_cpu(cpu, tidle);
-	return cpu_online(cpu) ? 0 : -ENOSYS;
-}
-
-void smp_send_reschedule(int cpu)
-{
-	cpumask_t cpu_mask;
-	cpumask_clear(&cpu_mask);
-	cpumask_set_cpu(cpu, &cpu_mask);
-	send_ipi(IPI_SCHEDULE, 0, cpu_mask);
-}
-
-/* TLB flushing
- *
- * Flush needs to be done on the local CPU and on any other CPU that
- * may have the same mapping. The mm->cpu_vm_mask is used to keep track
- * of which CPUs that a specific process has been executed on.
- */
-void flush_tlb_common(struct mm_struct* mm, struct vm_area_struct* vma, unsigned long addr)
-{
-	unsigned long flags;
-	cpumask_t cpu_mask;
-
-	spin_lock_irqsave(&tlbstate_lock, flags);
-	cpu_mask = (mm == FLUSH_ALL ? cpu_all_mask : *mm_cpumask(mm));
-	cpumask_clear_cpu(smp_processor_id(), &cpu_mask);
-	flush_mm = mm;
-	flush_vma = vma;
-	flush_addr = addr;
-	send_ipi(IPI_FLUSH_TLB, 1, cpu_mask);
-	spin_unlock_irqrestore(&tlbstate_lock, flags);
-}
-
-void flush_tlb_all(void)
-{
-	__flush_tlb_all();
-	flush_tlb_common(FLUSH_ALL, FLUSH_ALL, 0);
-}
-
-void flush_tlb_mm(struct mm_struct *mm)
-{
-	__flush_tlb_mm(mm);
-	flush_tlb_common(mm, FLUSH_ALL, 0);
-	/* No more mappings in other CPUs */
-	cpumask_clear(mm_cpumask(mm));
-	cpumask_set_cpu(smp_processor_id(), mm_cpumask(mm));
-}
-
-void flush_tlb_page(struct vm_area_struct *vma,
-			   unsigned long addr)
-{
-	__flush_tlb_page(vma, addr);
-	flush_tlb_common(vma->vm_mm, vma, addr);
-}
-
-/* Inter processor interrupts
- *
- * The IPIs are used for:
- *   * Force a schedule on a CPU
- *   * FLush TLB on other CPUs
- *   * Call a function on other CPUs
- */
-
-int send_ipi(int vector, int wait, cpumask_t cpu_mask)
-{
-	int i = 0;
-	reg_intr_vect_rw_ipi ipi = REG_RD(intr_vect, irq_regs[i], rw_ipi);
-	int ret = 0;
-
-	/* Calculate CPUs to send to. */
-	cpumask_and(&cpu_mask, &cpu_mask, cpu_online_mask);
-
-	/* Send the IPI. */
-	for_each_cpu(i, &cpu_mask)
-	{
-		ipi.vector |= vector;
-		REG_WR(intr_vect, irq_regs[i], rw_ipi, ipi);
-	}
-
-	/* Wait for IPI to finish on other CPUS */
-	if (wait) {
-		for_each_cpu(i, &cpu_mask) {
-                        int j;
-                        for (j = 0 ; j < 1000; j++) {
-				ipi = REG_RD(intr_vect, irq_regs[i], rw_ipi);
-				if (!ipi.vector)
-					break;
-				udelay(100);
-			}
-
-			/* Timeout? */
-			if (ipi.vector) {
-				printk("SMP call timeout from %d to %d\n", smp_processor_id(), i);
-				ret = -ETIMEDOUT;
-				dump_stack();
-			}
-		}
-	}
-	return ret;
-}
-
-/*
- * You must not call this function with disabled interrupts or from a
- * hardware interrupt handler or from a bottom half handler.
- */
-int smp_call_function(void (*func)(void *info), void *info, int wait)
-{
-	cpumask_t cpu_mask;
-	struct call_data_struct data;
-	int ret;
-
-	cpumask_setall(&cpu_mask);
-	cpumask_clear_cpu(smp_processor_id(), &cpu_mask);
-
-	WARN_ON(irqs_disabled());
-
-	data.func = func;
-	data.info = info;
-	data.wait = wait;
-
-	spin_lock(&call_lock);
-	call_data = &data;
-	ret = send_ipi(IPI_CALL, wait, cpu_mask);
-	spin_unlock(&call_lock);
-
-	return ret;
-}
-
-irqreturn_t crisv32_ipi_interrupt(int irq, void *dev_id)
-{
-	void (*func) (void *info) = call_data->func;
-	void *info = call_data->info;
-	reg_intr_vect_rw_ipi ipi;
-
-	ipi = REG_RD(intr_vect, irq_regs[smp_processor_id()], rw_ipi);
-
-	if (ipi.vector & IPI_SCHEDULE) {
-		scheduler_ipi();
-	}
-	if (ipi.vector & IPI_CALL) {
-		func(info);
-	}
-	if (ipi.vector & IPI_FLUSH_TLB) {
-		if (flush_mm == FLUSH_ALL)
-			__flush_tlb_all();
-		else if (flush_vma == FLUSH_ALL)
-			__flush_tlb_mm(flush_mm);
-		else
-			__flush_tlb_page(flush_vma, flush_addr);
-	}
-
-	ipi.vector = 0;
-	REG_WR(intr_vect, irq_regs[smp_processor_id()], rw_ipi, ipi);
-
-	return IRQ_HANDLED;
-}
-
diff --git a/arch/cris/arch-v32/kernel/time.c b/arch/cris/arch-v32/kernel/time.c
index c17b01a..4fce9f1 100644
--- a/arch/cris/arch-v32/kernel/time.c
+++ b/arch/cris/arch-v32/kernel/time.c
@@ -8,12 +8,14 @@
 #include <linux/timex.h>
 #include <linux/time.h>
 #include <linux/clocksource.h>
+#include <linux/clockchips.h>
 #include <linux/interrupt.h>
 #include <linux/swap.h>
 #include <linux/sched.h>
 #include <linux/init.h>
 #include <linux/threads.h>
 #include <linux/cpufreq.h>
+#include <linux/sched_clock.h>
 #include <linux/mm.h>
 #include <asm/types.h>
 #include <asm/signal.h>
@@ -36,33 +38,11 @@
 /* Number of 763 counts before watchdog bites */
 #define ETRAX_WD_CNT		((2*ETRAX_WD_HZ)/HZ + 1)
 
-/* Register the continuos readonly timer available in FS and ARTPEC-3.  */
-static cycle_t read_cont_rotime(struct clocksource *cs)
-{
-	return (u32)REG_RD(timer, regi_timer0, r_time);
-}
-
-static struct clocksource cont_rotime = {
-	.name   = "crisv32_rotime",
-	.rating = 300,
-	.read   = read_cont_rotime,
-	.mask   = CLOCKSOURCE_MASK(32),
-	.flags  = CLOCK_SOURCE_IS_CONTINUOUS,
-};
-
-static int __init etrax_init_cont_rotime(void)
-{
-	clocksource_register_khz(&cont_rotime, 100000);
-	return 0;
-}
-arch_initcall(etrax_init_cont_rotime);
+#define CRISV32_TIMER_FREQ	(100000000lu)
 
 unsigned long timer_regs[NR_CPUS] =
 {
 	regi_timer0,
-#ifdef CONFIG_SMP
-	regi_timer2
-#endif
 };
 
 extern int set_rtc_mmss(unsigned long nowtime);
@@ -189,81 +169,104 @@ void handle_watchdog_bite(struct pt_regs *regs)
 #endif
 }
 
-/*
- * timer_interrupt() needs to keep up the real-time clock,
- * as well as call the "xtime_update()" routine every clocktick.
- */
-extern void cris_do_profile(struct pt_regs *regs);
+extern void cris_profile_sample(struct pt_regs *regs);
+static void __iomem *timer_base;
 
-static inline irqreturn_t timer_interrupt(int irq, void *dev_id)
+static void crisv32_clkevt_mode(enum clock_event_mode mode,
+				struct clock_event_device *dev)
 {
-	struct pt_regs *regs = get_irq_regs();
-	int cpu = smp_processor_id();
-	reg_timer_r_masked_intr masked_intr;
-	reg_timer_rw_ack_intr ack_intr = { 0 };
-
-	/* Check if the timer interrupt is for us (a tmr0 int) */
-	masked_intr = REG_RD(timer, timer_regs[cpu], r_masked_intr);
-	if (!masked_intr.tmr0)
-		return IRQ_NONE;
+	reg_timer_rw_tmr0_ctrl ctrl = {
+		.op = regk_timer_hold,
+		.freq = regk_timer_f100,
+	};
 
-	/* Acknowledge the timer irq. */
-	ack_intr.tmr0 = 1;
-	REG_WR(timer, timer_regs[cpu], rw_ack_intr, ack_intr);
+	REG_WR(timer, timer_base, rw_tmr0_ctrl, ctrl);
+}
 
-	/* Reset watchdog otherwise it resets us! */
-	reset_watchdog();
+static int crisv32_clkevt_next_event(unsigned long evt,
+				     struct clock_event_device *dev)
+{
+	reg_timer_rw_tmr0_ctrl ctrl = {
+		.op = regk_timer_ld,
+		.freq = regk_timer_f100,
+	};
+
+	REG_WR(timer, timer_base, rw_tmr0_div, evt);
+	REG_WR(timer, timer_base, rw_tmr0_ctrl, ctrl);
+
+	ctrl.op = regk_timer_run;
+	REG_WR(timer, timer_base, rw_tmr0_ctrl, ctrl);
+
+	return 0;
+}
+
+static irqreturn_t crisv32_timer_interrupt(int irq, void *dev_id)
+{
+	struct clock_event_device *evt = dev_id;
+	reg_timer_rw_tmr0_ctrl ctrl = {
+		.op = regk_timer_hold,
+		.freq = regk_timer_f100,
+	};
+	reg_timer_rw_ack_intr ack = { .tmr0 = 1 };
+	reg_timer_r_masked_intr intr;
+
+	intr = REG_RD(timer, timer_base, r_masked_intr);
+	if (!intr.tmr0)
+		return IRQ_NONE;
 
-	/* Update statistics. */
-	update_process_times(user_mode(regs));
+	REG_WR(timer, timer_base, rw_tmr0_ctrl, ctrl);
+	REG_WR(timer, timer_base, rw_ack_intr, ack);
 
-	cris_do_profile(regs); /* Save profiling information */
+	reset_watchdog();
+#ifdef CONFIG_SYSTEM_PROFILER
+	cris_profile_sample(get_irq_regs());
+#endif
 
-	/* The master CPU is responsible for the time keeping. */
-	if (cpu != 0)
-		return IRQ_HANDLED;
+	evt->event_handler(evt);
 
-	/* Call the real timer interrupt handler */
-	xtime_update(1);
 	return IRQ_HANDLED;
 }
 
+static struct clock_event_device crisv32_clockevent = {
+	.name = "crisv32-timer",
+	.rating = 300,
+	.features = CLOCK_EVT_FEAT_ONESHOT,
+	.set_mode = crisv32_clkevt_mode,
+	.set_next_event = crisv32_clkevt_next_event,
+};
+
 /* Timer is IRQF_SHARED so drivers can add stuff to the timer irq chain. */
 static struct irqaction irq_timer = {
-	.handler = timer_interrupt,
-	.flags = IRQF_SHARED,
-	.name = "timer"
+	.handler = crisv32_timer_interrupt,
+	.flags = IRQF_TIMER | IRQF_SHARED,
+	.name = "crisv32-timer",
+	.dev_id = &crisv32_clockevent,
 };
 
-void __init cris_timer_init(void)
+static u64 notrace crisv32_timer_sched_clock(void)
 {
-	int cpu = smp_processor_id();
-	reg_timer_rw_tmr0_ctrl tmr0_ctrl = { 0 };
-	reg_timer_rw_tmr0_div tmr0_div = TIMER0_DIV;
-	reg_timer_rw_intr_mask timer_intr_mask;
+	return REG_RD(timer, timer_base, r_time);
+}
 
-	/* Setup the etrax timers.
-	 * Base frequency is 100MHz, divider 1000000 -> 100 HZ
-	 * We use timer0, so timer1 is free.
-	 * The trig timer is used by the fasttimer API if enabled.
-	 */
+static void __init crisv32_timer_init(void)
+{
+	reg_timer_rw_intr_mask timer_intr_mask;
+	reg_timer_rw_tmr0_ctrl ctrl = {
+		.op = regk_timer_hold,
+		.freq = regk_timer_f100,
+	};
 
-	tmr0_ctrl.op = regk_timer_ld;
-	tmr0_ctrl.freq = regk_timer_f100;
-	REG_WR(timer, timer_regs[cpu], rw_tmr0_div, tmr0_div);
-	REG_WR(timer, timer_regs[cpu], rw_tmr0_ctrl, tmr0_ctrl); /* Load */
-	tmr0_ctrl.op = regk_timer_run;
-	REG_WR(timer, timer_regs[cpu], rw_tmr0_ctrl, tmr0_ctrl); /* Start */
+	REG_WR(timer, timer_base, rw_tmr0_ctrl, ctrl);
 
-	/* Enable the timer irq. */
-	timer_intr_mask = REG_RD(timer, timer_regs[cpu], rw_intr_mask);
+	timer_intr_mask = REG_RD(timer, timer_base, rw_intr_mask);
 	timer_intr_mask.tmr0 = 1;
-	REG_WR(timer, timer_regs[cpu], rw_intr_mask, timer_intr_mask);
+	REG_WR(timer, timer_base, rw_intr_mask, timer_intr_mask);
 }
 
 void __init time_init(void)
 {
-	reg_intr_vect_rw_mask intr_mask;
+	int irq;
+	int ret;
 
 	/* Probe for the RTC and read it if it exists.
 	 * Before the RTC can be probed the loops_per_usec variable needs
@@ -273,17 +276,28 @@ void __init time_init(void)
 	 */
 	loops_per_usec = 50;
 
-	/* Start CPU local timer. */
-	cris_timer_init();
+	irq = TIMER0_INTR_VECT;
+	timer_base = (void __iomem *) regi_timer0;
+
+	crisv32_timer_init();
+
+	sched_clock_register(crisv32_timer_sched_clock, 32,
+			     CRISV32_TIMER_FREQ);
+
+	clocksource_mmio_init(timer_base + REG_RD_ADDR_timer_r_time,
+			      "crisv32-timer", CRISV32_TIMER_FREQ,
+			      300, 32, clocksource_mmio_readl_up);
+
+	crisv32_clockevent.cpumask = cpu_possible_mask;
+	crisv32_clockevent.irq = irq;
 
-	/* Enable the timer irq in global config. */
-	intr_mask = REG_RD_VECT(intr_vect, regi_irq, rw_mask, 1);
-	intr_mask.timer0 = 1;
-	REG_WR_VECT(intr_vect, regi_irq, rw_mask, 1, intr_mask);
+	ret = setup_irq(irq, &irq_timer);
+	if (ret)
+		pr_warn("failed to setup irq %d\n", irq);
 
-	/* Now actually register the timer irq handler that calls
-	 * timer_interrupt(). */
-	setup_irq(TIMER0_INTR_VECT, &irq_timer);
+	clockevents_config_and_register(&crisv32_clockevent,
+					CRISV32_TIMER_FREQ,
+					2, 0xffffffff);
 
 	/* Enable watchdog if we should use one. */
 
diff --git a/arch/cris/arch-v32/lib/Makefile b/arch/cris/arch-v32/lib/Makefile
index dd296b9..e91cf02 100644
--- a/arch/cris/arch-v32/lib/Makefile
+++ b/arch/cris/arch-v32/lib/Makefile
@@ -3,5 +3,5 @@
 #
 
 lib-y  = checksum.o checksumcopy.o string.o usercopy.o memset.o \
-	csumcpfruser.o spinlock.o delay.o strcmp.o
+	csumcpfruser.o delay.o strcmp.o
 
diff --git a/arch/cris/arch-v32/lib/spinlock.S b/arch/cris/arch-v32/lib/spinlock.S
deleted file mode 100644
index fe610b9..0000000
--- a/arch/cris/arch-v32/lib/spinlock.S
+++ /dev/null
@@ -1,40 +0,0 @@
-;; Core of the spinlock implementation
-;;
-;; Copyright (C) 2004 Axis Communications AB.
-;;
-;; Author: Mikael Starvik
-
-
-	.global cris_spin_lock
-	.type   cris_spin_lock,@function
-	.global cris_spin_trylock
-	.type   cris_spin_trylock,@function
-
-	.text
-
-cris_spin_lock:
-	clearf	p
-1:	test.b	[$r10]
-	beq	1b
-	clearf	p
-	ax
-	clear.b [$r10]
-	bcs     1b
-	clearf	p
-	ret
-	nop
-
-	.size   cris_spin_lock, . - cris_spin_lock
-
-cris_spin_trylock:
-	clearf	p
-1:	move.b	[$r10], $r11
-	ax
-	clear.b [$r10]
-        bcs	1b
-        clearf	p
-	ret
-	movu.b	$r11,$r10
-
-	.size   cris_spin_trylock, . - cris_spin_trylock
-
diff --git a/arch/cris/arch-v32/mm/init.c b/arch/cris/arch-v32/mm/init.c
index 3deca52..f5438ca 100644
--- a/arch/cris/arch-v32/mm/init.c
+++ b/arch/cris/arch-v32/mm/init.c
@@ -40,17 +40,6 @@ void __init cris_mmu_init(void)
 	 */
 	per_cpu(current_pgd, smp_processor_id()) = init_mm.pgd;
 
-#ifdef CONFIG_SMP
-	{
-		pgd_t **pgd;
-		pgd = (pgd_t**)&per_cpu(current_pgd, smp_processor_id());
-		SUPP_BANK_SEL(1);
-		SUPP_REG_WR(RW_MM_TLB_PGD, pgd);
-		SUPP_BANK_SEL(2);
-		SUPP_REG_WR(RW_MM_TLB_PGD, pgd);
-	}
-#endif
-
 	/* Initialise the TLB. Function found in tlb.c. */
 	tlb_init();
 
diff --git a/arch/cris/arch-v32/mm/mmu.S b/arch/cris/arch-v32/mm/mmu.S
index 72727c1..c098104 100644
--- a/arch/cris/arch-v32/mm/mmu.S
+++ b/arch/cris/arch-v32/mm/mmu.S
@@ -115,11 +115,7 @@
 	move.d	$r0, [$r1]	; last_refill_cause = rw_mm_cause
 
 3:	; Probably not in a loop, continue normal processing
-#ifdef CONFIG_SMP
-	move    $s7, $acr	; PGD
-#else
 	move.d  current_pgd, $acr ; PGD
-#endif
 	; Look up PMD in PGD
 	lsrq	24, $r0	; Get PMD index into PGD (bit 24-31)
 	move.d  [$acr], $acr	; PGD for the current process