Input: bfin_rotary - move platform header to linux/platform_data

The platform data definition of the rotary driver should be generic for all
architectures.

Signed-off-by: Sonic Zhang <sonic.zhang@analog.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>

5 files changed, 4 insertions, 120 deletions

diff --git a/arch/blackfin/include/asm/bfin_rotary.h b/arch/blackfin/include/asm/bfin_rotary.h
deleted file mode 100644
index 8895a75..0000000
--- a/arch/blackfin/include/asm/bfin_rotary.h
+++ /dev/null
@@ -1,116 +0,0 @@
-/*
- * board initialization should put one of these structures into platform_data
- * and place the bfin-rotary onto platform_bus named "bfin-rotary".
- *
- * Copyright 2008-2010 Analog Devices Inc.
- *
- * Licensed under the GPL-2 or later.
- */
-
-#ifndef _BFIN_ROTARY_H
-#define _BFIN_ROTARY_H
-
-/* mode bitmasks */
-#define ROT_QUAD_ENC	CNTMODE_QUADENC	/* quadrature/grey code encoder mode */
-#define ROT_BIN_ENC	CNTMODE_BINENC	/* binary encoder mode */
-#define ROT_UD_CNT	CNTMODE_UDCNT	/* rotary counter mode */
-#define ROT_DIR_CNT	CNTMODE_DIRCNT	/* direction counter mode */
-
-#define ROT_DEBE	DEBE		/* Debounce Enable */
-
-#define ROT_CDGINV	CDGINV		/* CDG Pin Polarity Invert */
-#define ROT_CUDINV	CUDINV		/* CUD Pin Polarity Invert */
-#define ROT_CZMINV	CZMINV		/* CZM Pin Polarity Invert */
-
-struct bfin_rotary_platform_data {
-	/* set rotary UP KEY_### or BTN_### in case you prefer
-	 * bfin-rotary to send EV_KEY otherwise set 0
-	 */
-	unsigned int rotary_up_key;
-	/* set rotary DOWN KEY_### or BTN_### in case you prefer
-	 * bfin-rotary to send EV_KEY otherwise set 0
-	 */
-	unsigned int rotary_down_key;
-	/* set rotary BUTTON KEY_### or BTN_### */
-	unsigned int rotary_button_key;
-	/* set rotary Relative Axis REL_### in case you prefer
-	 * bfin-rotary to send EV_REL otherwise set 0
-	 */
-	unsigned int rotary_rel_code;
-	unsigned short debounce;	/* 0..17 */
-	unsigned short mode;
-	unsigned short pm_wakeup;
-};
-
-/* CNT_CONFIG bitmasks */
-#define CNTE		(1 << 0)	/* Counter Enable */
-#define DEBE		(1 << 1)	/* Debounce Enable */
-#define CDGINV		(1 << 4)	/* CDG Pin Polarity Invert */
-#define CUDINV		(1 << 5)	/* CUD Pin Polarity Invert */
-#define CZMINV		(1 << 6)	/* CZM Pin Polarity Invert */
-#define CNTMODE_SHIFT	8
-#define CNTMODE		(0x7 << CNTMODE_SHIFT)	/* Counter Operating Mode */
-#define ZMZC		(1 << 1)	/* CZM Zeroes Counter Enable */
-#define BNDMODE_SHIFT	12
-#define BNDMODE		(0x3 << BNDMODE_SHIFT)	/* Boundary register Mode */
-#define INPDIS		(1 << 15)	/* CUG and CDG Input Disable */
-
-#define CNTMODE_QUADENC	(0 << CNTMODE_SHIFT)	/* quadrature encoder mode */
-#define CNTMODE_BINENC	(1 << CNTMODE_SHIFT)	/* binary encoder mode */
-#define CNTMODE_UDCNT	(2 << CNTMODE_SHIFT)	/* up/down counter mode */
-#define CNTMODE_DIRCNT	(4 << CNTMODE_SHIFT)	/* direction counter mode */
-#define CNTMODE_DIRTMR	(5 << CNTMODE_SHIFT)	/* direction timer mode */
-
-#define BNDMODE_COMP	(0 << BNDMODE_SHIFT)	/* boundary compare mode */
-#define BNDMODE_ZERO	(1 << BNDMODE_SHIFT)	/* boundary compare and zero mode */
-#define BNDMODE_CAPT	(2 << BNDMODE_SHIFT)	/* boundary capture mode */
-#define BNDMODE_AEXT	(3 << BNDMODE_SHIFT)	/* boundary auto-extend mode */
-
-/* CNT_IMASK bitmasks */
-#define ICIE		(1 << 0)	/* Illegal Gray/Binary Code Interrupt Enable */
-#define UCIE		(1 << 1)	/* Up count Interrupt Enable */
-#define DCIE		(1 << 2)	/* Down count Interrupt Enable */
-#define MINCIE		(1 << 3)	/* Min Count Interrupt Enable */
-#define MAXCIE		(1 << 4)	/* Max Count Interrupt Enable */
-#define COV31IE		(1 << 5)	/* Bit 31 Overflow Interrupt Enable */
-#define COV15IE		(1 << 6)	/* Bit 15 Overflow Interrupt Enable */
-#define CZEROIE		(1 << 7)	/* Count to Zero Interrupt Enable */
-#define CZMIE		(1 << 8)	/* CZM Pin Interrupt Enable */
-#define CZMEIE		(1 << 9)	/* CZM Error Interrupt Enable */
-#define CZMZIE		(1 << 10)	/* CZM Zeroes Counter Interrupt Enable */
-
-/* CNT_STATUS bitmasks */
-#define ICII		(1 << 0)	/* Illegal Gray/Binary Code Interrupt Identifier */
-#define UCII		(1 << 1)	/* Up count Interrupt Identifier */
-#define DCII		(1 << 2)	/* Down count Interrupt Identifier */
-#define MINCII		(1 << 3)	/* Min Count Interrupt Identifier */
-#define MAXCII		(1 << 4)	/* Max Count Interrupt Identifier */
-#define COV31II		(1 << 5)	/* Bit 31 Overflow Interrupt Identifier */
-#define COV15II		(1 << 6)	/* Bit 15 Overflow Interrupt Identifier */
-#define CZEROII		(1 << 7)	/* Count to Zero Interrupt Identifier */
-#define CZMII		(1 << 8)	/* CZM Pin Interrupt Identifier */
-#define CZMEII		(1 << 9)	/* CZM Error Interrupt Identifier */
-#define CZMZII		(1 << 10)	/* CZM Zeroes Counter Interrupt Identifier */
-
-/* CNT_COMMAND bitmasks */
-#define W1LCNT		0xf		/* Load Counter Register */
-#define W1LMIN		0xf0		/* Load Min Register */
-#define W1LMAX		0xf00		/* Load Max Register */
-#define W1ZMONCE	(1 << 12)	/* Enable CZM Clear Counter Once */
-
-#define W1LCNT_ZERO	(1 << 0)	/* write 1 to load CNT_COUNTER with zero */
-#define W1LCNT_MIN	(1 << 2)	/* write 1 to load CNT_COUNTER from CNT_MIN */
-#define W1LCNT_MAX	(1 << 3)	/* write 1 to load CNT_COUNTER from CNT_MAX */
-
-#define W1LMIN_ZERO	(1 << 4)	/* write 1 to load CNT_MIN with zero */
-#define W1LMIN_CNT	(1 << 5)	/* write 1 to load CNT_MIN from CNT_COUNTER */
-#define W1LMIN_MAX	(1 << 7)	/* write 1 to load CNT_MIN from CNT_MAX */
-
-#define W1LMAX_ZERO	(1 << 8)	/* write 1 to load CNT_MAX with zero */
-#define W1LMAX_CNT	(1 << 9)	/* write 1 to load CNT_MAX from CNT_COUNTER */
-#define W1LMAX_MIN	(1 << 10)	/* write 1 to load CNT_MAX from CNT_MIN */
-
-/* CNT_DEBOUNCE bitmasks */
-#define DPRESCALE	0xf		/* Load Counter Register */
-
-#endif
diff --git a/arch/blackfin/mach-bf527/boards/ad7160eval.c b/arch/blackfin/mach-bf527/boards/ad7160eval.c
index 9501bd8..beb011b 100644
--- a/arch/blackfin/mach-bf527/boards/ad7160eval.c
+++ b/arch/blackfin/mach-bf527/boards/ad7160eval.c
@@ -666,7 +666,7 @@ static struct platform_device bfin_sport1_uart_device = {
 #endif
 
 #if IS_ENABLED(CONFIG_INPUT_BFIN_ROTARY)
-#include <asm/bfin_rotary.h>
+#include <linux/platform_data/bfin_rotary.h>
 
 static struct bfin_rotary_platform_data bfin_rotary_data = {
 	/*.rotary_up_key     = KEY_UP,*/
diff --git a/arch/blackfin/mach-bf527/boards/ezkit.c b/arch/blackfin/mach-bf527/boards/ezkit.c
index d64f565..728cda4 100644
--- a/arch/blackfin/mach-bf527/boards/ezkit.c
+++ b/arch/blackfin/mach-bf527/boards/ezkit.c
@@ -1092,7 +1092,7 @@ static struct platform_device bfin_device_gpiokeys = {
 #endif
 
 #if IS_ENABLED(CONFIG_INPUT_BFIN_ROTARY)
-#include <asm/bfin_rotary.h>
+#include <linux/platform_data/bfin_rotary.h>
 
 static struct bfin_rotary_platform_data bfin_rotary_data = {
 	/*.rotary_up_key     = KEY_UP,*/
diff --git a/arch/blackfin/mach-bf548/boards/ezkit.c b/arch/blackfin/mach-bf548/boards/ezkit.c
index 1fe7ff2..8f70f83 100644
--- a/arch/blackfin/mach-bf548/boards/ezkit.c
+++ b/arch/blackfin/mach-bf548/boards/ezkit.c
@@ -159,7 +159,7 @@ static struct platform_device bf54x_kpad_device = {
 #endif
 
 #if IS_ENABLED(CONFIG_INPUT_BFIN_ROTARY)
-#include <asm/bfin_rotary.h>
+#include <linux/platform_data/bfin_rotary.h>
 
 static struct bfin_rotary_platform_data bfin_rotary_data = {
 	/*.rotary_up_key     = KEY_UP,*/
diff --git a/arch/blackfin/mach-bf609/boards/ezkit.c b/arch/blackfin/mach-bf609/boards/ezkit.c
index e2c0b02..f9dc64d 100644
--- a/arch/blackfin/mach-bf609/boards/ezkit.c
+++ b/arch/blackfin/mach-bf609/boards/ezkit.c
@@ -75,7 +75,7 @@ static struct platform_device bfin_isp1760_device = {
 #endif
 
 #if IS_ENABLED(CONFIG_INPUT_BFIN_ROTARY)
-#include <asm/bfin_rotary.h>
+#include <linux/platform_data/bfin_rotary.h>
 
 static struct bfin_rotary_platform_data bfin_rotary_data = {
 	/*.rotary_up_key     = KEY_UP,*/