[Blackfin] arch: Fix bug to Enable bf548 to Re-program Clocks while Kernel boots.

Reprogram DDR EBIU register properly for bf548.

Signed-off-by: Sonic Zhang <sonic.zhang@analog.com>
Signed-off-by: Bryan Wu <bryan.wu@analog.com>

2 files changed, 64 insertions, 2 deletions

diff --git a/arch/blackfin/Kconfig b/arch/blackfin/Kconfig
index 5ebcfd2..1364dca 100644
--- a/arch/blackfin/Kconfig
+++ b/arch/blackfin/Kconfig
@@ -317,7 +317,7 @@ config VCO_MULT
 	range 1 64
 	default "22" if BFIN533_EZKIT
 	default "45" if BFIN533_STAMP
-	default "20" if (BFIN537_STAMP || BFIN527_EZKIT)
+	default "20" if (BFIN537_STAMP || BFIN527_EZKIT || BFIN548_EZKIT)
 	default "22" if BFIN533_BLUETECHNIX_CM
 	default "20" if BFIN537_BLUETECHNIX_CM
 	default "20" if BFIN561_BLUETECHNIX_CM
@@ -354,7 +354,7 @@ config SCLK_DIV
 	range 1 15
 	default 5 if BFIN533_EZKIT
 	default 5 if BFIN533_STAMP
-	default 4 if (BFIN537_STAMP || BFIN527_EZKIT)
+	default 4 if (BFIN537_STAMP || BFIN527_EZKIT || BFIN548_EZKIT)
 	default 5 if BFIN533_BLUETECHNIX_CM
 	default 4 if BFIN537_BLUETECHNIX_CM
 	default 4 if BFIN561_BLUETECHNIX_CM
@@ -409,6 +409,7 @@ config MEM_SIZE
 	default  32 if BFIN533_EZKIT
 	default  64 if BFIN527_EZKIT
 	default  64 if BFIN537_STAMP
+	default  64 if BFIN548_EZKIT
 	default  64 if BFIN561_EZKIT
 	default 128 if BFIN533_STAMP
 	default  64 if PNAV10
@@ -416,6 +417,7 @@ config MEM_SIZE
 
 config MEM_ADD_WIDTH
 	int "SDRAM Memory Address Width"
+	depends on (!BF54x)
 	default  9 if BFIN533_EZKIT
 	default  9 if BFIN561_EZKIT
 	default  9 if H8606_HVSISTEMAS
@@ -424,6 +426,19 @@ config MEM_ADD_WIDTH
 	default 11 if BFIN533_STAMP
 	default 10 if PNAV10
 
+
+choice
+	prompt "DDR SDRAM Chip Type"
+	depends on BFIN548_EZKIT
+	default MEM_MT46V32M16_5B
+
+config MEM_MT46V32M16_6T
+        bool "MT46V32M16_6T"
+
+config MEM_MT46V32M16_5B
+        bool "MT46V32M16_5B"
+endchoice
+
 config ENET_FLASH_PIN
 	int "PF port/pin used for flash and ethernet sharing"
 	depends on (BFIN533_STAMP)
diff --git a/arch/blackfin/mach-bf548/head.S b/arch/blackfin/mach-bf548/head.S
index 745662e..74fe258 100644
--- a/arch/blackfin/mach-bf548/head.S
+++ b/arch/blackfin/mach-bf548/head.S
@@ -324,12 +324,25 @@ ENTRY(_start_dma_code)
 	w[p0] = r0.l;
 	ssync;
 
+#if defined(CONFIG_BF54x)
+	P2.H = hi(EBIU_RSTCTL);
+	P2.L = lo(EBIU_RSTCTL);
+	R0 = [P2];
+	BITSET (R0, 3);
+#else
 	P2.H = hi(EBIU_SDGCTL);
 	P2.L = lo(EBIU_SDGCTL);
 	R0 = [P2];
 	BITSET (R0, 24);
+#endif
 	[P2] = R0;
 	SSYNC;
+#if defined(CONFIG_BF54x)
+.LSRR_MODE:
+	R0 = [P2];
+	CC = BITTST(R0, 4);
+	if !CC JUMP .LSRR_MODE;
+#endif
 
 	r0 = CONFIG_VCO_MULT & 63;       /* Load the VCO multiplier         */
 	r0 = r0 << 9;                    /* Shift it over,                  */
@@ -361,6 +374,39 @@ ENTRY(_start_dma_code)
 	w[p0] = r0.l;
 	ssync;
 
+#if defined(CONFIG_BF54x)
+	P2.H = hi(EBIU_RSTCTL);
+	P2.L = lo(EBIU_RSTCTL);
+	R0 = [P2];
+	CC = BITTST(R0, 0);
+	if CC jump .Lskipddrrst;
+	BITSET (R0, 0);
+.Lskipddrrst:
+	BITCLR (R0, 3);
+	[P2] = R0;
+	SSYNC;
+
+	p0.l = lo(EBIU_DDRCTL0);
+	p0.h = hi(EBIU_DDRCTL0);
+	r0.l = lo(mem_DDRCTL0);
+	r0.h = hi(mem_DDRCTL0);
+	[p0] = r0;
+	ssync;
+
+	p0.l = lo(EBIU_DDRCTL1);
+	p0.h = hi(EBIU_DDRCTL1);
+	r0.l = lo(mem_DDRCTL1);
+	r0.h = hi(mem_DDRCTL1);
+	[p0] = r0;
+	ssync;
+
+	p0.l = lo(EBIU_DDRCTL2);
+	p0.h = hi(EBIU_DDRCTL2);
+	r0.l = lo(mem_DDRCTL2);
+	r0.h = hi(mem_DDRCTL2);
+	[p0] = r0;
+	ssync;
+#else
 	p0.l = lo(EBIU_SDRRC);
 	p0.h = hi(EBIU_SDRRC);
 	r0 = mem_SDRRC;
@@ -394,6 +440,7 @@ ENTRY(_start_dma_code)
 	R1 = R1 | R0;
 	[P2] = R1;
 	SSYNC;
+#endif
 
 	p0.h = hi(SIC_IWR0);
 	p0.l = lo(SIC_IWR0);