diff options
author | Sonic Zhang <sonic.zhang@analog.com> | 2013-05-30 18:37:28 +0800 |
---|---|---|
committer | Steven Miao <realmz6@gmail.com> | 2013-11-15 17:33:42 +0800 |
commit | 54e4ff4d402450af5cec599f1cd9ab34997b3149 (patch) | |
tree | 2b4c53899c774b45fa37dbfc0440e459b2fdc16b /arch/blackfin/mach-bf548 | |
parent | 036c5df1839f709ed2018d4cd3bed1934eb26b83 (diff) | |
download | op-kernel-dev-54e4ff4d402450af5cec599f1cd9ab34997b3149.zip op-kernel-dev-54e4ff4d402450af5cec599f1cd9ab34997b3149.tar.gz |
blackfin: adi gpio driver and pinctrl driver support
Remove gpio driver for new gpio controller on BF54x and BF60x.
Build the bfin_gpio driver only when other BF5xx processors are selected.
Replace the prefix of some gpio and peripheral functions with adi.
add portmux platform data in machine portmux.h
Signed-off-by: Sonic Zhang <sonic.zhang@analog.com>
Signed-off-by: Steven Miao <realmz6@gmail.com>
Diffstat (limited to 'arch/blackfin/mach-bf548')
-rw-r--r-- | arch/blackfin/mach-bf548/Kconfig | 34 | ||||
-rw-r--r-- | arch/blackfin/mach-bf548/boards/ezkit.c | 495 | ||||
-rw-r--r-- | arch/blackfin/mach-bf548/include/mach/gpio.h | 8 | ||||
-rw-r--r-- | arch/blackfin/mach-bf548/include/mach/irq.h | 2 | ||||
-rw-r--r-- | arch/blackfin/mach-bf548/include/mach/portmux.h | 2 |
5 files changed, 489 insertions, 52 deletions
diff --git a/arch/blackfin/mach-bf548/Kconfig b/arch/blackfin/mach-bf548/Kconfig index 94acb58..334ec7b 100644 --- a/arch/blackfin/mach-bf548/Kconfig +++ b/arch/blackfin/mach-bf548/Kconfig @@ -377,40 +377,6 @@ config IRQ_PINT3 endmenu -comment "Pin Interrupt to Port Assignment" -menu "Assignment" - -config PINTx_REASSIGN - bool "Reprogram PINT Assignment" - default y - help - The interrupt assignment registers controls the pin-to-interrupt - assignment in a byte-wide manner. Each option allows you to select - a set of pins (High/Low Byte) of an specific Port being mapped - to one of the four PIN Interrupts IRQ_PINTx. - - You shouldn't change any of these unless you know exactly what you're doing. - Please consult the Blackfin BF54x Processor Hardware Reference Manual. - -config PINT0_ASSIGN - hex "PINT0_ASSIGN" - depends on PINTx_REASSIGN - default 0x00000101 -config PINT1_ASSIGN - hex "PINT1_ASSIGN" - depends on PINTx_REASSIGN - default 0x01010000 -config PINT2_ASSIGN - hex "PINT2_ASSIGN" - depends on PINTx_REASSIGN - default 0x07000101 -config PINT3_ASSIGN - hex "PINT3_ASSIGN" - depends on PINTx_REASSIGN - default 0x02020303 - -endmenu - endmenu endif diff --git a/arch/blackfin/mach-bf548/boards/ezkit.c b/arch/blackfin/mach-bf548/boards/ezkit.c index 372eb54..984b3f9 100644 --- a/arch/blackfin/mach-bf548/boards/ezkit.c +++ b/arch/blackfin/mach-bf548/boards/ezkit.c @@ -17,6 +17,9 @@ #include <linux/i2c.h> #include <linux/interrupt.h> #include <linux/usb/musb.h> +#include <linux/pinctrl/machine.h> +#include <linux/pinctrl/pinconf-generic.h> +#include <linux/platform_data/pinctrl-adi2.h> #include <asm/bfin5xx_spi.h> #include <asm/dma.h> #include <asm/gpio.h> @@ -1058,6 +1061,411 @@ static const struct ad7877_platform_data bfin_ad7877_ts_info = { }; #endif +#ifdef CONFIG_PINCTRL_ADI2 + +# define ADI_PINT_DEVNAME "adi-gpio-pint" +# define ADI_GPIO_DEVNAME "adi-gpio" +# define ADI_PINCTRL_DEVNAME "pinctrl-adi2" + +static struct platform_device bfin_pinctrl_device = { + .name = ADI_PINCTRL_DEVNAME, + .id = 0, +}; + +static struct resource bfin_pint0_resources[] = { + { + .start = PINT0_MASK_SET, + .end = PINT0_LATCH + 3, + .flags = IORESOURCE_MEM, + }, + { + .start = IRQ_PINT0, + .end = IRQ_PINT0, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct platform_device bfin_pint0_device = { + .name = ADI_PINT_DEVNAME, + .id = 0, + .num_resources = ARRAY_SIZE(bfin_pint0_resources), + .resource = bfin_pint0_resources, +}; + +static struct resource bfin_pint1_resources[] = { + { + .start = PINT1_MASK_SET, + .end = PINT1_LATCH + 3, + .flags = IORESOURCE_MEM, + }, + { + .start = IRQ_PINT1, + .end = IRQ_PINT1, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct platform_device bfin_pint1_device = { + .name = ADI_PINT_DEVNAME, + .id = 1, + .num_resources = ARRAY_SIZE(bfin_pint1_resources), + .resource = bfin_pint1_resources, +}; + +static struct resource bfin_pint2_resources[] = { + { + .start = PINT2_MASK_SET, + .end = PINT2_LATCH + 3, + .flags = IORESOURCE_MEM, + }, + { + .start = IRQ_PINT2, + .end = IRQ_PINT2, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct platform_device bfin_pint2_device = { + .name = ADI_PINT_DEVNAME, + .id = 2, + .num_resources = ARRAY_SIZE(bfin_pint2_resources), + .resource = bfin_pint2_resources, +}; + +static struct resource bfin_pint3_resources[] = { + { + .start = PINT3_MASK_SET, + .end = PINT3_LATCH + 3, + .flags = IORESOURCE_MEM, + }, + { + .start = IRQ_PINT3, + .end = IRQ_PINT3, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct platform_device bfin_pint3_device = { + .name = ADI_PINT_DEVNAME, + .id = 3, + .num_resources = ARRAY_SIZE(bfin_pint3_resources), + .resource = bfin_pint3_resources, +}; + +static struct resource bfin_gpa_resources[] = { + { + .start = PORTA_FER, + .end = PORTA_MUX + 3, + .flags = IORESOURCE_MEM, + }, + { /* optional */ + .start = IRQ_PA0, + .end = IRQ_PA0, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct adi_pinctrl_gpio_platform_data bfin_gpa_pdata = { + .port_gpio_base = GPIO_PA0, /* Optional */ + .port_pin_base = GPIO_PA0, + .port_width = GPIO_BANKSIZE, + .pint_id = 0, /* PINT0 */ + .pint_assign = true, /* PINT upper 16 bit */ + .pint_map = 0, /* mapping mask in PINT */ +}; + +static struct platform_device bfin_gpa_device = { + .name = ADI_GPIO_DEVNAME, + .id = 0, + .num_resources = ARRAY_SIZE(bfin_gpa_resources), + .resource = bfin_gpa_resources, + .dev = { + .platform_data = &bfin_gpa_pdata, /* Passed to driver */ + }, +}; + +static struct resource bfin_gpb_resources[] = { + { + .start = PORTB_FER, + .end = PORTB_MUX + 3, + .flags = IORESOURCE_MEM, + }, + { + .start = IRQ_PB0, + .end = IRQ_PB0, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct adi_pinctrl_gpio_platform_data bfin_gpb_pdata = { + .port_gpio_base = GPIO_PB0, + .port_pin_base = GPIO_PB0, + .port_width = 15, + .pint_id = 0, + .pint_assign = true, + .pint_map = 1, +}; + +static struct platform_device bfin_gpb_device = { + .name = ADI_GPIO_DEVNAME, + .id = 1, + .num_resources = ARRAY_SIZE(bfin_gpb_resources), + .resource = bfin_gpb_resources, + .dev = { + .platform_data = &bfin_gpb_pdata, /* Passed to driver */ + }, +}; + +static struct resource bfin_gpc_resources[] = { + { + .start = PORTC_FER, + .end = PORTC_MUX + 3, + .flags = IORESOURCE_MEM, + }, + { + .start = IRQ_PC0, + .end = IRQ_PC0, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct adi_pinctrl_gpio_platform_data bfin_gpc_pdata = { + .port_gpio_base = GPIO_PC0, + .port_pin_base = GPIO_PC0, + .port_width = 14, + .pint_id = 2, + .pint_assign = true, + .pint_map = 0, +}; + +static struct platform_device bfin_gpc_device = { + .name = ADI_GPIO_DEVNAME, + .id = 2, + .num_resources = ARRAY_SIZE(bfin_gpc_resources), + .resource = bfin_gpc_resources, + .dev = { + .platform_data = &bfin_gpc_pdata, /* Passed to driver */ + }, +}; + +static struct resource bfin_gpd_resources[] = { + { + .start = PORTD_FER, + .end = PORTD_MUX + 3, + .flags = IORESOURCE_MEM, + }, + { + .start = IRQ_PD0, + .end = IRQ_PD0, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct adi_pinctrl_gpio_platform_data bfin_gpd_pdata = { + .port_gpio_base = GPIO_PD0, + .port_pin_base = GPIO_PD0, + .port_width = GPIO_BANKSIZE, + .pint_id = 2, + .pint_assign = false, + .pint_map = 1, +}; + +static struct platform_device bfin_gpd_device = { + .name = ADI_GPIO_DEVNAME, + .id = 3, + .num_resources = ARRAY_SIZE(bfin_gpd_resources), + .resource = bfin_gpd_resources, + .dev = { + .platform_data = &bfin_gpd_pdata, /* Passed to driver */ + }, +}; + +static struct resource bfin_gpe_resources[] = { + { + .start = PORTE_FER, + .end = PORTE_MUX + 3, + .flags = IORESOURCE_MEM, + }, + { + .start = IRQ_PE0, + .end = IRQ_PE0, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct adi_pinctrl_gpio_platform_data bfin_gpe_pdata = { + .port_gpio_base = GPIO_PE0, + .port_pin_base = GPIO_PE0, + .port_width = GPIO_BANKSIZE, + .pint_id = 3, + .pint_assign = true, + .pint_map = 2, +}; + +static struct platform_device bfin_gpe_device = { + .name = ADI_GPIO_DEVNAME, + .id = 4, + .num_resources = ARRAY_SIZE(bfin_gpe_resources), + .resource = bfin_gpe_resources, + .dev = { + .platform_data = &bfin_gpe_pdata, /* Passed to driver */ + }, +}; + +static struct resource bfin_gpf_resources[] = { + { + .start = PORTF_FER, + .end = PORTF_MUX + 3, + .flags = IORESOURCE_MEM, + }, + { + .start = IRQ_PF0, + .end = IRQ_PF0, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct adi_pinctrl_gpio_platform_data bfin_gpf_pdata = { + .port_gpio_base = GPIO_PF0, + .port_pin_base = GPIO_PF0, + .port_width = GPIO_BANKSIZE, + .pint_id = 3, + .pint_assign = false, + .pint_map = 3, +}; + +static struct platform_device bfin_gpf_device = { + .name = ADI_GPIO_DEVNAME, + .id = 5, + .num_resources = ARRAY_SIZE(bfin_gpf_resources), + .resource = bfin_gpf_resources, + .dev = { + .platform_data = &bfin_gpf_pdata, /* Passed to driver */ + }, +}; + +static struct resource bfin_gpg_resources[] = { + { + .start = PORTG_FER, + .end = PORTG_MUX + 3, + .flags = IORESOURCE_MEM, + }, + { + .start = IRQ_PG0, + .end = IRQ_PG0, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct adi_pinctrl_gpio_platform_data bfin_gpg_pdata = { + .port_gpio_base = GPIO_PG0, + .port_pin_base = GPIO_PG0, + .port_width = GPIO_BANKSIZE, + .pint_id = -1, +}; + +static struct platform_device bfin_gpg_device = { + .name = ADI_GPIO_DEVNAME, + .id = 6, + .num_resources = ARRAY_SIZE(bfin_gpg_resources), + .resource = bfin_gpg_resources, + .dev = { + .platform_data = &bfin_gpg_pdata, /* Passed to driver */ + }, +}; + +static struct resource bfin_gph_resources[] = { + { + .start = PORTH_FER, + .end = PORTH_MUX + 3, + .flags = IORESOURCE_MEM, + }, + { + .start = IRQ_PH0, + .end = IRQ_PH0, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct adi_pinctrl_gpio_platform_data bfin_gph_pdata = { + .port_gpio_base = GPIO_PH0, + .port_pin_base = GPIO_PH0, + .port_width = 14, + .pint_id = -1, +}; + +static struct platform_device bfin_gph_device = { + .name = ADI_GPIO_DEVNAME, + .id = 7, + .num_resources = ARRAY_SIZE(bfin_gph_resources), + .resource = bfin_gph_resources, + .dev = { + .platform_data = &bfin_gph_pdata, /* Passed to driver */ + }, +}; + +static struct resource bfin_gpi_resources[] = { + { + .start = PORTI_FER, + .end = PORTI_MUX + 3, + .flags = IORESOURCE_MEM, + }, + { + .start = IRQ_PI0, + .end = IRQ_PI0, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct adi_pinctrl_gpio_platform_data bfin_gpi_pdata = { + .port_gpio_base = GPIO_PI0, + .port_pin_base = GPIO_PI0, + .port_width = GPIO_BANKSIZE, + .pint_id = -1, +}; + +static struct platform_device bfin_gpi_device = { + .name = ADI_GPIO_DEVNAME, + .id = 8, + .num_resources = ARRAY_SIZE(bfin_gpi_resources), + .resource = bfin_gpi_resources, + .dev = { + .platform_data = &bfin_gpi_pdata, /* Passed to driver */ + }, +}; + +static struct resource bfin_gpj_resources[] = { + { + .start = PORTJ_FER, + .end = PORTJ_MUX + 3, + .flags = IORESOURCE_MEM, + }, + { + .start = IRQ_PJ0, + .end = IRQ_PJ0, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct adi_pinctrl_gpio_platform_data bfin_gpj_pdata = { + .port_gpio_base = GPIO_PJ0, + .port_pin_base = GPIO_PJ0, + .port_width = 14, + .pint_id = -1, +}; + +static struct platform_device bfin_gpj_device = { + .name = ADI_GPIO_DEVNAME, + .id = 9, + .num_resources = ARRAY_SIZE(bfin_gpj_resources), + .resource = bfin_gpj_resources, + .dev = { + .platform_data = &bfin_gpj_pdata, /* Passed to driver */ + }, +}; + +#endif + static struct spi_board_info bfin_spi_board_info[] __initdata = { #if defined(CONFIG_MTD_M25P80) \ || defined(CONFIG_MTD_M25P80_MODULE) @@ -1066,7 +1474,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = { .modalias = "m25p80", /* Name of spi_driver for this device */ .max_speed_hz = 25000000, /* max spi clock (SCK) speed in HZ */ .bus_num = 0, /* Framework bus number */ - .chip_select = 1, /* SPI_SSEL1*/ + .chip_select = MAX_CTRL_CS + GPIO_PE4, /* SPI_SSEL1*/ .platform_data = &bfin_spi_flash_data, .controller_data = &spi_flash_chip_info, .mode = SPI_MODE_3, @@ -1078,7 +1486,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = { .modalias = "ad183x", .max_speed_hz = 3125000, /* max spi clock (SCK) speed in HZ */ .bus_num = 1, - .chip_select = 4, + .chip_select = MAX_CTRL_CS + GPIO_PG6, /* SPI_SSEL2 */ }, #endif #if defined(CONFIG_TOUCHSCREEN_AD7877) || defined(CONFIG_TOUCHSCREEN_AD7877_MODULE) @@ -1088,7 +1496,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = { .irq = IRQ_PB4, /* old boards (<=Rev 1.3) use IRQ_PJ11 */ .max_speed_hz = 12500000, /* max spi clock (SCK) speed in HZ */ .bus_num = 0, - .chip_select = 2, + .chip_select = MAX_CTRL_CS + GPIO_PE5, /* SPI_SSEL2 */ }, #endif #if defined(CONFIG_SPI_SPIDEV) || defined(CONFIG_SPI_SPIDEV_MODULE) @@ -1096,7 +1504,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = { .modalias = "spidev", .max_speed_hz = 3125000, /* max spi clock (SCK) speed in HZ */ .bus_num = 0, - .chip_select = 1, + .chip_select = MAX_CTRL_CS + GPIO_PE4, /* SPI_SSEL1 */ }, #endif #if defined(CONFIG_INPUT_ADXL34X_SPI) || defined(CONFIG_INPUT_ADXL34X_SPI_MODULE) @@ -1106,7 +1514,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = { .irq = IRQ_PC5, .max_speed_hz = 5000000, /* max spi clock (SCK) speed in HZ */ .bus_num = 1, - .chip_select = 2, + .chip_select = MAX_CTRL_CS + GPIO_PG6, /* SPI_SSEL2 */ .mode = SPI_MODE_3, }, #endif @@ -1152,7 +1560,7 @@ static struct resource bfin_spi1_resource[] = { /* SPI controller data */ static struct bfin5xx_spi_master bf54x_spi_master_info0 = { - .num_chipselect = 4, + .num_chipselect = MAX_CTRL_CS + MAX_BLACKFIN_GPIOS, .enable_dma = 1, /* master has the ability to do dma transfer */ .pin_req = {P_SPI0_SCK, P_SPI0_MISO, P_SPI0_MOSI, 0}, }; @@ -1168,7 +1576,7 @@ static struct platform_device bf54x_spi_master0 = { }; static struct bfin5xx_spi_master bf54x_spi_master_info1 = { - .num_chipselect = 4, + .num_chipselect = MAX_CTRL_CS + MAX_BLACKFIN_GPIOS, .enable_dma = 1, /* master has the ability to do dma transfer */ .pin_req = {P_SPI1_SCK, P_SPI1_MISO, P_SPI1_MOSI, 0}, }; @@ -1508,6 +1916,23 @@ static struct platform_device bfin_ac97 = { static struct platform_device *ezkit_devices[] __initdata = { &bfin_dpmc, +#if defined(CONFIG_PINCTRL_ADI2) + &bfin_pinctrl_device, + &bfin_pint0_device, + &bfin_pint1_device, + &bfin_pint2_device, + &bfin_pint3_device, + &bfin_gpa_device, + &bfin_gpb_device, + &bfin_gpc_device, + &bfin_gpd_device, + &bfin_gpe_device, + &bfin_gpf_device, + &bfin_gpg_device, + &bfin_gph_device, + &bfin_gpi_device, + &bfin_gpj_device, +#endif #if defined(CONFIG_RTC_DRV_BFIN) || defined(CONFIG_RTC_DRV_BFIN_MODULE) &rtc_device, @@ -1644,10 +2069,66 @@ static struct platform_device *ezkit_devices[] __initdata = { #endif }; +/* Pin control settings */ +static struct pinctrl_map __initdata bfin_pinmux_map[] = { + /* per-device maps */ + PIN_MAP_MUX_GROUP_DEFAULT("bfin-uart.0", "pinctrl-adi2.0", NULL, "uart0"), + PIN_MAP_MUX_GROUP_DEFAULT("bfin-uart.1", "pinctrl-adi2.0", NULL, "uart1"), +#ifdef CONFIG_BFIN_UART1_CTSRTS + PIN_MAP_MUX_GROUP_DEFAULT("bfin-uart.1", "pinctrl-adi2.0", NULL, "uart1_ctsrts"), +#endif + PIN_MAP_MUX_GROUP_DEFAULT("bfin-uart.2", "pinctrl-adi2.0", NULL, "uart2"), + PIN_MAP_MUX_GROUP_DEFAULT("bfin-uart.3", "pinctrl-adi2.0", NULL, "uart3"), +#ifdef CONFIG_BFIN_UART3_CTSRTS + PIN_MAP_MUX_GROUP_DEFAULT("bfin-uart.3", "pinctrl-adi2.0", NULL, "uart3_ctsrts"), +#endif + PIN_MAP_MUX_GROUP_DEFAULT("bfin_sir.0", "pinctrl-adi2.0", NULL, "uart0"), + PIN_MAP_MUX_GROUP_DEFAULT("bfin_sir.1", "pinctrl-adi2.0", NULL, "uart1"), + PIN_MAP_MUX_GROUP_DEFAULT("bfin_sir.2", "pinctrl-adi2.0", NULL, "uart2"), + PIN_MAP_MUX_GROUP_DEFAULT("bfin_sir.3", "pinctrl-adi2.0", NULL, "uart3"), + PIN_MAP_MUX_GROUP_DEFAULT("bfin-sdh.0", "pinctrl-adi2.0", NULL, "rsi0"), + PIN_MAP_MUX_GROUP_DEFAULT("bfin-spi.0", "pinctrl-adi2.0", NULL, "spi0"), + PIN_MAP_MUX_GROUP_DEFAULT("bfin-spi.1", "pinctrl-adi2.0", NULL, "spi1"), + PIN_MAP_MUX_GROUP_DEFAULT("i2c-bfin-twi.0", "pinctrl-adi2.0", NULL, "twi0"), +#if !defined(CONFIG_BF542) /* The BF542 only has 1 TWI */ + PIN_MAP_MUX_GROUP_DEFAULT("i2c-bfin-twi.1", "pinctrl-adi2.0", NULL, "twi1"), +#endif + PIN_MAP_MUX_GROUP_DEFAULT("bfin-rotary", "pinctrl-adi2.0", NULL, "rotary"), + PIN_MAP_MUX_GROUP_DEFAULT("bfin_can.0", "pinctrl-adi2.0", NULL, "can0"), + PIN_MAP_MUX_GROUP_DEFAULT("bfin_can.1", "pinctrl-adi2.0", NULL, "can1"), + PIN_MAP_MUX_GROUP_DEFAULT("bf54x-lq043", "pinctrl-adi2.0", NULL, "ppi0_24b"), + PIN_MAP_MUX_GROUP_DEFAULT("bfin-i2s.0", "pinctrl-adi2.0", NULL, "sport0"), + PIN_MAP_MUX_GROUP_DEFAULT("bfin-tdm.0", "pinctrl-adi2.0", NULL, "sport0"), + PIN_MAP_MUX_GROUP_DEFAULT("bfin-ac97.0", "pinctrl-adi2.0", NULL, "sport0"), + PIN_MAP_MUX_GROUP_DEFAULT("bfin-i2s.1", "pinctrl-adi2.0", NULL, "sport1"), + PIN_MAP_MUX_GROUP_DEFAULT("bfin-tdm.1", "pinctrl-adi2.0", NULL, "sport1"), + PIN_MAP_MUX_GROUP_DEFAULT("bfin-ac97.1", "pinctrl-adi2.0", NULL, "sport1"), + PIN_MAP_MUX_GROUP_DEFAULT("bfin-i2s.2", "pinctrl-adi2.0", NULL, "sport2"), + PIN_MAP_MUX_GROUP_DEFAULT("bfin-tdm.2", "pinctrl-adi2.0", NULL, "sport2"), + PIN_MAP_MUX_GROUP_DEFAULT("bfin-ac97.2", "pinctrl-adi2.0", NULL, "sport2"), + PIN_MAP_MUX_GROUP_DEFAULT("bfin-i2s.3", "pinctrl-adi2.0", NULL, "sport3"), + PIN_MAP_MUX_GROUP_DEFAULT("bfin-tdm.3", "pinctrl-adi2.0", NULL, "sport3"), + PIN_MAP_MUX_GROUP_DEFAULT("bfin-ac97.3", "pinctrl-adi2.0", NULL, "sport3"), + PIN_MAP_MUX_GROUP_DEFAULT("bfin-sport-uart.0", "pinctrl-adi2.0", NULL, "sport0"), + PIN_MAP_MUX_GROUP_DEFAULT("bfin-sport-uart.1", "pinctrl-adi2.0", NULL, "sport1"), + PIN_MAP_MUX_GROUP_DEFAULT("bfin-sport-uart.2", "pinctrl-adi2.0", NULL, "sport2"), + PIN_MAP_MUX_GROUP_DEFAULT("bfin-sport-uart.3", "pinctrl-adi2.0", NULL, "sport3"), + PIN_MAP_MUX_GROUP_DEFAULT("pata-bf54x", "pinctrl-adi2.0", NULL, "atapi"), +#ifdef CONFIG_BF548_ATAPI_ALTERNATIVE_PORT + PIN_MAP_MUX_GROUP_DEFAULT("pata-bf54x", "pinctrl-adi2.0", NULL, "atapi_alter"), +#endif + PIN_MAP_MUX_GROUP_DEFAULT("bf5xx-nand.0", "pinctrl-adi2.0", NULL, "nfc0"), + PIN_MAP_MUX_GROUP_DEFAULT("bf54x-keys", "pinctrl-adi2.0", NULL, "keys_4x4"), +}; + static int __init ezkit_init(void) { printk(KERN_INFO "%s(): registering device resources\n", __func__); + /* Initialize pinmuxing */ + pinctrl_register_mappings(bfin_pinmux_map, + ARRAY_SIZE(bfin_pinmux_map)); + i2c_register_board_info(0, bfin_i2c_board_info0, ARRAY_SIZE(bfin_i2c_board_info0)); #if !defined(CONFIG_BF542) /* The BF542 only has 1 TWI */ diff --git a/arch/blackfin/mach-bf548/include/mach/gpio.h b/arch/blackfin/mach-bf548/include/mach/gpio.h index be9edb2..006da1e 100644 --- a/arch/blackfin/mach-bf548/include/mach/gpio.h +++ b/arch/blackfin/mach-bf548/include/mach/gpio.h @@ -194,14 +194,6 @@ struct gpio_port_t { unsigned int port_mux; }; -struct gpio_port_s { - unsigned short fer; - unsigned short data; - unsigned short dir; - unsigned short inen; - unsigned int mux; -}; - #endif #include <mach-common/ports-a.h> diff --git a/arch/blackfin/mach-bf548/include/mach/irq.h b/arch/blackfin/mach-bf548/include/mach/irq.h index 10dc142..cf7cb72 100644 --- a/arch/blackfin/mach-bf548/include/mach/irq.h +++ b/arch/blackfin/mach-bf548/include/mach/irq.h @@ -433,7 +433,7 @@ #include <linux/types.h> /* - * bfin pint registers layout + * gpio pint registers layout */ struct bfin_pint_regs { u32 mask_set; diff --git a/arch/blackfin/mach-bf548/include/mach/portmux.h b/arch/blackfin/mach-bf548/include/mach/portmux.h index e222462..d9f8632 100644 --- a/arch/blackfin/mach-bf548/include/mach/portmux.h +++ b/arch/blackfin/mach-bf548/include/mach/portmux.h @@ -7,8 +7,6 @@ #ifndef _MACH_PORTMUX_H_ #define _MACH_PORTMUX_H_ -#define MAX_RESOURCES MAX_BLACKFIN_GPIOS - #define P_SPORT2_TFS (P_DEFINED | P_IDENT(GPIO_PA0) | P_FUNCT(0)) #define P_SPORT2_DTSEC (P_DEFINED | P_IDENT(GPIO_PA1) | P_FUNCT(0)) #define P_SPORT2_DTPRI (P_DEFINED | P_IDENT(GPIO_PA2) | P_FUNCT(0)) |