Merge branch 'master' into for-next

Fast-forwarded to current state of Linus' tree as there are patches to be
applied for files that didn't exist on the old branch.

5 files changed, 29 insertions, 46 deletions

diff --git a/arch/blackfin/mach-bf548/include/mach/anomaly.h b/arch/blackfin/mach-bf548/include/mach/anomaly.h
index 4070079..ffd0537 100644
--- a/arch/blackfin/mach-bf548/include/mach/anomaly.h
+++ b/arch/blackfin/mach-bf548/include/mach/anomaly.h
@@ -81,7 +81,11 @@
 /* PLL Status Register Is Inaccurate */
 #define ANOMALY_05000351 (__SILICON_REVISION__ < 1)
 /* bfrom_SysControl() Firmware Function Performs Improper System Reset */
-#define ANOMALY_05000353 (__SILICON_REVISION__ < 2)
+/*
+ * Note: anomaly sheet says this is fixed with bf54x-0.2+, but testing
+ *       shows that the fix itself does not cover all cases.
+ */
+#define ANOMALY_05000353 (1)
 /* Regulator Programming Blocked when Hibernate Wakeup Source Remains Active */
 #define ANOMALY_05000355 (__SILICON_REVISION__ < 1)
 /* System Stalled During A Core Access To AMC While A Core Access To NFC FIFO Is Required */
diff --git a/arch/blackfin/mach-bf548/include/mach/defBF544.h b/arch/blackfin/mach-bf548/include/mach/defBF544.h
index 642468c..bcccab3 100644
--- a/arch/blackfin/mach-bf548/include/mach/defBF544.h
+++ b/arch/blackfin/mach-bf548/include/mach/defBF544.h
@@ -657,22 +657,4 @@
 
 /* Bit masks for EPPI0 are obtained from common base header for EPPIx (EPPI1 and EPPI2) */
 
-/* Bit masks for HMDMAx_CONTROL */
-
-#define                   HMDMAEN  0x1        /* Handshake MDMA Enable */
-#define                       REP  0x2        /* Handshake MDMA Request Polarity */
-#define                       UTE  0x8        /* Urgency Threshold Enable */
-#define                       OIE  0x10       /* Overflow Interrupt Enable */
-#define                      BDIE  0x20       /* Block Done Interrupt Enable */
-#define                      MBDI  0x40       /* Mask Block Done Interrupt */
-#define                       DRQ  0x300      /* Handshake MDMA Request Type */
-#define                       RBC  0x1000     /* Force Reload of BCOUNT */
-#define                        PS  0x2000     /* Pin Status */
-#define                        OI  0x4000     /* Overflow Interrupt Generated */
-#define                       BDI  0x8000     /* Block Done Interrupt Generated */
-
-/* ******************************************* */
-/*     MULTI BIT MACRO ENUMERATIONS            */
-/* ******************************************* */
-
 #endif /* _DEF_BF544_H */
diff --git a/arch/blackfin/mach-bf548/include/mach/defBF547.h b/arch/blackfin/mach-bf548/include/mach/defBF547.h
index 2f3337c..1cbba11 100644
--- a/arch/blackfin/mach-bf548/include/mach/defBF547.h
+++ b/arch/blackfin/mach-bf548/include/mach/defBF547.h
@@ -1063,23 +1063,4 @@
 
 #define             DMA_COUNT_LOW  0xffff     /* Lower 16-bits of byte count of DMA transfer for DMA master channel */
 
-/* Bit masks for HMDMAx_CONTROL */
-
-#define                   HMDMAEN  0x1        /* Handshake MDMA Enable */
-#define                       REP  0x2        /* Handshake MDMA Request Polarity */
-#define                       UTE  0x8        /* Urgency Threshold Enable */
-#define                       OIE  0x10       /* Overflow Interrupt Enable */
-#define                      BDIE  0x20       /* Block Done Interrupt Enable */
-#define                      MBDI  0x40       /* Mask Block Done Interrupt */
-#define                       DRQ  0x300      /* Handshake MDMA Request Type */
-#define                       RBC  0x1000     /* Force Reload of BCOUNT */
-#define                        PS  0x2000     /* Pin Status */
-#define                        OI  0x4000     /* Overflow Interrupt Generated */
-#define                       BDI  0x8000     /* Block Done Interrupt Generated */
-
-/* ******************************************* */
-/*     MULTI BIT MACRO ENUMERATIONS            */
-/* ******************************************* */
-
-
 #endif /* _DEF_BF547_H */
diff --git a/arch/blackfin/mach-bf548/include/mach/dma.h b/arch/blackfin/mach-bf548/include/mach/dma.h
index a30d242..1a1091b 100644
--- a/arch/blackfin/mach-bf548/include/mach/dma.h
+++ b/arch/blackfin/mach-bf548/include/mach/dma.h
@@ -27,17 +27,37 @@
 #define CH_PIXC_OVERLAY		16
 #define CH_PIXC_OUTPUT		17
 #define CH_SPORT2_RX		18
-#define CH_UART2_RX		18
 #define CH_SPORT2_TX		19
-#define CH_UART2_TX		19
 #define CH_SPORT3_RX		20
-#define CH_UART3_RX		20
 #define CH_SPORT3_TX		21
-#define CH_UART3_TX		21
 #define CH_SDH			22
 #define CH_NFC			22
 #define CH_SPI2			23
 
+#if defined(CONFIG_UART2_DMA_RX_ON_DMA13)
+#define CH_UART2_RX		13
+#define IRQ_UART2_RX		BFIN_IRQ(37)	/* UART2 RX USE EPP1 (DMA13) Interrupt */
+#define CH_UART2_TX		14
+#define IRQ_UART2_TX		BFIN_IRQ(38)	/* UART2 RX USE EPP1 (DMA14) Interrupt */
+#else						/* Default USE SPORT2's DMA Channel */
+#define CH_UART2_RX		18
+#define IRQ_UART2_RX		BFIN_IRQ(33)	/* UART2 RX (DMA18) Interrupt */
+#define CH_UART2_TX		19
+#define IRQ_UART2_TX		BFIN_IRQ(34)	/* UART2 TX (DMA19) Interrupt */
+#endif
+
+#if defined(CONFIG_UART3_DMA_RX_ON_DMA15)
+#define CH_UART3_RX		15
+#define IRQ_UART3_RX		BFIN_IRQ(64)	/* UART3 RX USE PIXC IN0 (DMA15) Interrupt */
+#define CH_UART3_TX		16
+#define IRQ_UART3_TX		BFIN_IRQ(65)	/* UART3 TX USE PIXC IN1 (DMA16) Interrupt */
+#else						/* Default USE SPORT3's DMA Channel */
+#define CH_UART3_RX		20
+#define IRQ_UART3_RX		BFIN_IRQ(35)	/* UART3 RX (DMA20) Interrupt */
+#define CH_UART3_TX		21
+#define IRQ_UART3_TX		BFIN_IRQ(36)	/* UART3 TX (DMA21) Interrupt */
+#endif
+
 #define CH_MEM_STREAM0_DEST	24
 #define CH_MEM_STREAM0_SRC	25
 #define CH_MEM_STREAM1_DEST	26
diff --git a/arch/blackfin/mach-bf548/include/mach/irq.h b/arch/blackfin/mach-bf548/include/mach/irq.h
index 99fd1b2..7f87787 100644
--- a/arch/blackfin/mach-bf548/include/mach/irq.h
+++ b/arch/blackfin/mach-bf548/include/mach/irq.h
@@ -74,13 +74,9 @@ Events         (highest priority)  EMU         0
 #define IRQ_UART2_ERROR		BFIN_IRQ(31)	/* UART2 Status (Error) Interrupt */
 #define IRQ_CAN0_ERROR		BFIN_IRQ(32)	/* CAN0 Status (Error) Interrupt */
 #define IRQ_SPORT2_RX		BFIN_IRQ(33)	/* SPORT2 RX (DMA18) Interrupt */
-#define IRQ_UART2_RX		BFIN_IRQ(33)	/* UART2 RX (DMA18) Interrupt */
 #define IRQ_SPORT2_TX		BFIN_IRQ(34)	/* SPORT2 TX (DMA19) Interrupt */
-#define IRQ_UART2_TX		BFIN_IRQ(34)	/* UART2 TX (DMA19) Interrupt */
 #define IRQ_SPORT3_RX		BFIN_IRQ(35)	/* SPORT3 RX (DMA20) Interrupt */
-#define IRQ_UART3_RX		BFIN_IRQ(35)	/* UART3 RX (DMA20) Interrupt */
 #define IRQ_SPORT3_TX		BFIN_IRQ(36)	/* SPORT3 TX (DMA21) Interrupt */
-#define IRQ_UART3_TX		BFIN_IRQ(36)	/* UART3 TX (DMA21) Interrupt */
 #define IRQ_EPPI1		BFIN_IRQ(37)	/* EPP1 (DMA13) Interrupt */
 #define IRQ_EPPI2		BFIN_IRQ(38)	/* EPP2 (DMA14) Interrupt */
 #define IRQ_SPI1		BFIN_IRQ(39)	/* SPI1 (DMA5) Interrupt */