[Blackfin] arch: Functional power management support: Add support for cpu frequency scaling

Signed-off-by: Michael Hennerich <michael.hennerich@analog.com>
Signed-off-by: Bryan Wu <cooloney@kernel.org>

2 files changed, 31 insertions, 18 deletions

diff --git a/arch/blackfin/kernel/time-ts.c b/arch/blackfin/kernel/time-ts.c
index 1ce8cb1..4482c47 100644
--- a/arch/blackfin/kernel/time-ts.c
+++ b/arch/blackfin/kernel/time-ts.c
@@ -16,11 +16,35 @@
 #include <linux/irq.h>
 #include <linux/clocksource.h>
 #include <linux/clockchips.h>
+#include <linux/cpufreq.h>
 
 #include <asm/blackfin.h>
+#include <asm/time.h>
 
 #ifdef CONFIG_CYCLES_CLOCKSOURCE
 
+/* Accelerators for sched_clock()
+ * convert from cycles(64bits) => nanoseconds (64bits)
+ *  basic equation:
+ *		ns = cycles / (freq / ns_per_sec)
+ *		ns = cycles * (ns_per_sec / freq)
+ *		ns = cycles * (10^9 / (cpu_khz * 10^3))
+ *		ns = cycles * (10^6 / cpu_khz)
+ *
+ *	Then we use scaling math (suggested by george@mvista.com) to get:
+ *		ns = cycles * (10^6 * SC / cpu_khz) / SC
+ *		ns = cycles * cyc2ns_scale / SC
+ *
+ *	And since SC is a constant power of two, we can convert the div
+ *  into a shift.
+ *
+ *  We can use khz divisor instead of mhz to keep a better precision, since
+ *  cyc2ns_scale is limited to 10^6 * 2^10, which fits in 32 bits.
+ *  (mathieu.desnoyers@polymtl.ca)
+ *
+ *			-johnstul@us.ibm.com "math is hard, lets go shopping!"
+ */
+
 static unsigned long cyc2ns_scale;
 #define CYC2NS_SCALE_FACTOR 10 /* 2^10, carefully chosen */
 
@@ -82,8 +106,9 @@ static void bfin_timer_set_mode(enum clock_event_mode mode,
 {
 	switch (mode) {
 	case CLOCK_EVT_MODE_PERIODIC: {
-		unsigned long tcount = ((get_cclk() / (HZ * 1)) - 1);
+		unsigned long tcount = ((get_cclk() / (HZ * TIME_SCALE)) - 1);
 		bfin_write_TCNTL(TMPWR);
+		bfin_write_TSCALE(TIME_SCALE - 1);
 		CSYNC();
 		bfin_write_TPERIOD(tcount);
 		bfin_write_TCOUNT(tcount);
@@ -92,6 +117,7 @@ static void bfin_timer_set_mode(enum clock_event_mode mode,
 		break;
 	}
 	case CLOCK_EVT_MODE_ONESHOT:
+		bfin_write_TSCALE(0);
 		bfin_write_TCOUNT(0);
 		bfin_write_TCNTL(TMPWR | TMREN);
 		CSYNC();
@@ -115,7 +141,7 @@ static void __init bfin_timer_init(void)
 	/*
 	 * the TSCALE prescaler counter.
 	 */
-	bfin_write_TSCALE(0);
+	bfin_write_TSCALE(TIME_SCALE - 1);
 	bfin_write_TPERIOD(0);
 	bfin_write_TCOUNT(0);
 
diff --git a/arch/blackfin/kernel/time.c b/arch/blackfin/kernel/time.c
index 715b394..eb23523 100644
--- a/arch/blackfin/kernel/time.c
+++ b/arch/blackfin/kernel/time.c
@@ -6,9 +6,10 @@
  * Created:
  * Description:  This file contains the bfin-specific time handling details.
  *               Most of the stuff is located in the machine specific files.
+ *		 FIXME: (This file is subject for removal)
  *
  * Modified:
- *               Copyright 2004-2006 Analog Devices Inc.
+ *               Copyright 2004-2008 Analog Devices Inc.
  *
  * Bugs:         Enter bugs at http://blackfin.uclinux.org/
  *
@@ -35,6 +36,7 @@
 #include <linux/irq.h>
 
 #include <asm/blackfin.h>
+#include <asm/time.h>
 
 /* This is an NTP setting */
 #define	TICK_SIZE (tick_nsec / 1000)
@@ -47,21 +49,6 @@ static struct irqaction bfin_timer_irq = {
 	.flags = IRQF_DISABLED
 };
 
-/*
- * The way that the Blackfin core timer works is:
- *  - CCLK is divided by a programmable 8-bit pre-scaler (TSCALE)
- *  - Every time TSCALE ticks, a 32bit is counted down (TCOUNT)
- *
- * If you take the fastest clock (1ns, or 1GHz to make the math work easier)
- *    10ms is 10,000,000 clock ticks, which fits easy into a 32-bit counter
- *    (32 bit counter is 4,294,967,296ns or 4.2 seconds) so, we don't need
- *    to use TSCALE, and program it to zero (which is pass CCLK through).
- *    If you feel like using it, try to keep HZ * TIMESCALE to some
- *    value that divides easy (like power of 2).
- */
-
-#define TIME_SCALE 1
-
 static void
 time_sched_init(irq_handler_t timer_routine)
 {