Merge git://git.infradead.org/mtd-2.6

* git://git.infradead.org/mtd-2.6: (57 commits)
  [MTD] [NAND] subpage read feature as a way to increase performance. 
  CPUFREQ: S3C24XX NAND driver frequency scaling support.
  [MTD][NAND] au1550nd: remove unused variable
  [MTD] jedec_probe: Fix SST 16-bit chip detection
  [MTD][MTDPART] Fix a division by zero bug
  [MTD][MTDPART] Cleanup and document the erase region handling
  [MTD][MTDPART] Handle most checkpatch findings
  [MTD][MTDPART] Seperate main loop from per-partition code in add_mtd_partition
  [MTD] physmap: resume already suspended chips on failure to suspend
  [MTD] physmap: Fix suspend/resume/shutdown bugs.
  [MTD] [NOR] Fix -ETIMEO errors in CFI driver
  [MTD] [NAND] fsl_elbc_nand: fix section mismatch with CONFIG_MTD_OF_PARTS=y
  [JFFS2] Use .unlocked_ioctl
  [MTD] Fix const assignment in the MTD command line partitioning driver
  [MTD] [NOR] gen_probe: No debug message when debugging is disabled
  [MTD] [NAND] remove __PPC__ hardcoded address from DiskOnChip drivers
  [MTD] [MAPS] Remove the bast-flash driver.
  [MTD] [NAND] fsl_elbc_nand: ecclayout cleanups
  [MTD] [NAND] fsl_elbc_nand: implement support for flash-based BBT
  [MTD] [NAND] fsl_elbc_nand: fix OOB workability for large page NAND chips
  ...

5 files changed, 134 insertions, 3 deletions

diff --git a/arch/avr32/boards/atstk1000/Kconfig b/arch/avr32/boards/atstk1000/Kconfig
index af90b00..8dc4821 100644
--- a/arch/avr32/boards/atstk1000/Kconfig
+++ b/arch/avr32/boards/atstk1000/Kconfig
@@ -18,6 +18,10 @@ config BOARD_ATSTK1004
 	bool "ATSTK1004"
 	select CPU_AT32AP7002
 
+config BOARD_ATSTK1006
+	bool "ATSTK1006"
+	select CPU_AT32AP7000
+
 endchoice
 
 
diff --git a/arch/avr32/boards/atstk1000/Makefile b/arch/avr32/boards/atstk1000/Makefile
index beead86..edecee0 100644
--- a/arch/avr32/boards/atstk1000/Makefile
+++ b/arch/avr32/boards/atstk1000/Makefile
@@ -2,3 +2,4 @@ obj-y				+= setup.o flash.o
 obj-$(CONFIG_BOARD_ATSTK1002)	+= atstk1002.o
 obj-$(CONFIG_BOARD_ATSTK1003)	+= atstk1003.o
 obj-$(CONFIG_BOARD_ATSTK1004)	+= atstk1004.o
+obj-$(CONFIG_BOARD_ATSTK1006)	+= atstk1002.o
diff --git a/arch/avr32/boards/atstk1000/atstk1002.c b/arch/avr32/boards/atstk1000/atstk1002.c
index e11659b..14dc5a1 100644
--- a/arch/avr32/boards/atstk1000/atstk1002.c
+++ b/arch/avr32/boards/atstk1000/atstk1002.c
@@ -1,7 +1,7 @@
 /*
- * ATSTK1002 daughterboard-specific init code
+ * ATSTK1002/ATSTK1006 daughterboard-specific init code
  *
- * Copyright (C) 2005-2006 Atmel Corporation
+ * Copyright (C) 2005-2007 Atmel Corporation
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License version 2 as
@@ -35,6 +35,74 @@ unsigned long at32_board_osc_rates[3] = {
 	[2] = 12000000,	/* 12 MHz on osc1 */
 };
 
+/*
+ * The ATSTK1006 daughterboard is very similar to the ATSTK1002. Both
+ * have the AT32AP7000 chip on board; the difference is that the
+ * STK1006 has 128 MB SDRAM (the STK1002 uses the 8 MB SDRAM chip on
+ * the STK1000 motherboard) and 256 MB NAND flash (the STK1002 has
+ * none.)
+ *
+ * The RAM difference is handled by the boot loader, so the only
+ * difference we end up handling here is the NAND flash.
+ */
+#ifdef CONFIG_BOARD_ATSTK1006
+#include <linux/mtd/partitions.h>
+#include <asm/arch/smc.h>
+
+static struct smc_timing nand_timing __initdata = {
+	.ncs_read_setup		= 0,
+	.nrd_setup		= 10,
+	.ncs_write_setup	= 0,
+	.nwe_setup		= 10,
+
+	.ncs_read_pulse		= 30,
+	.nrd_pulse		= 15,
+	.ncs_write_pulse	= 30,
+	.nwe_pulse		= 15,
+
+	.read_cycle		= 30,
+	.write_cycle		= 30,
+
+	.ncs_read_recover	= 0,
+	.nrd_recover		= 15,
+	.ncs_write_recover	= 0,
+	/* WE# high -> RE# low min 60 ns */
+	.nwe_recover		= 50,
+};
+
+static struct smc_config nand_config __initdata = {
+	.bus_width		= 1,
+	.nrd_controlled		= 1,
+	.nwe_controlled		= 1,
+	.nwait_mode		= 0,
+	.byte_write		= 0,
+	.tdf_cycles		= 2,
+	.tdf_mode		= 0,
+};
+
+static struct mtd_partition nand_partitions[] = {
+	{
+		.name		= "main",
+		.offset		= 0x00000000,
+		.size		= MTDPART_SIZ_FULL,
+	},
+};
+
+static struct mtd_partition *nand_part_info(int size, int *num_partitions)
+{
+	*num_partitions = ARRAY_SIZE(nand_partitions);
+	return nand_partitions;
+}
+
+struct atmel_nand_data atstk1006_nand_data __initdata = {
+	.cle		= 21,
+	.ale		= 22,
+	.rdy_pin	= GPIO_PIN_PB(30),
+	.enable_pin	= GPIO_PIN_PB(29),
+	.partition_info	= nand_part_info,
+};
+#endif
+
 struct eth_addr {
 	u8 addr[6];
 };
@@ -218,6 +286,12 @@ static int __init atstk1002_init(void)
 
 	at32_add_system_devices();
 
+#ifdef CONFIG_BOARD_ATSTK1006
+	smc_set_timing(&nand_config, &nand_timing);
+	smc_set_configuration(3, &nand_config);
+	at32_add_device_nand(0, &atstk1006_nand_data);
+#endif
+
 #ifdef	CONFIG_BOARD_ATSTK100X_SW2_CUSTOM
 	at32_add_device_usart(1);
 #else
diff --git a/arch/avr32/mach-at32ap/at32ap700x.c b/arch/avr32/mach-at32ap/at32ap700x.c
index 604f44f..351e1b4 100644
--- a/arch/avr32/mach-at32ap/at32ap700x.c
+++ b/arch/avr32/mach-at32ap/at32ap700x.c
@@ -1871,6 +1871,58 @@ fail:
 #endif
 
 /* --------------------------------------------------------------------
+ * NAND Flash / SmartMedia
+ * -------------------------------------------------------------------- */
+static struct resource smc_cs3_resource[] __initdata = {
+	{
+		.start	= 0x0c000000,
+		.end	= 0x0fffffff,
+		.flags	= IORESOURCE_MEM,
+	}, {
+		.start	= 0xfff03c00,
+		.end	= 0xfff03fff,
+		.flags	= IORESOURCE_MEM,
+	},
+};
+
+struct platform_device *__init
+at32_add_device_nand(unsigned int id, struct atmel_nand_data *data)
+{
+	struct platform_device *pdev;
+
+	if (id != 0 || !data)
+		return NULL;
+
+	pdev = platform_device_alloc("atmel_nand", id);
+	if (!pdev)
+		goto fail;
+
+	if (platform_device_add_resources(pdev, smc_cs3_resource,
+				ARRAY_SIZE(smc_cs3_resource)))
+		goto fail;
+
+	if (platform_device_add_data(pdev, data,
+				sizeof(struct atmel_nand_data)))
+		goto fail;
+
+	set_ebi_sfr_bits(HMATRIX_BIT(CS3A));
+	if (data->enable_pin)
+		at32_select_gpio(data->enable_pin,
+				AT32_GPIOF_OUTPUT | AT32_GPIOF_HIGH);
+	if (data->rdy_pin)
+		at32_select_gpio(data->rdy_pin, 0);
+	if (data->det_pin)
+		at32_select_gpio(data->det_pin, 0);
+
+	platform_device_add(pdev);
+	return pdev;
+
+fail:
+	platform_device_put(pdev);
+	return NULL;
+}
+
+/* --------------------------------------------------------------------
  * AC97C
  * -------------------------------------------------------------------- */
 static struct resource atmel_ac97c0_resource[] __initdata = {
diff --git a/arch/avr32/mach-at32ap/hsmc.c b/arch/avr32/mach-at32ap/hsmc.c
index fa427ed..b2d9bc6 100644
--- a/arch/avr32/mach-at32ap/hsmc.c
+++ b/arch/avr32/mach-at32ap/hsmc.c
@@ -278,4 +278,4 @@ static int __init hsmc_init(void)
 {
 	return platform_driver_register(&hsmc_driver);
 }
-arch_initcall(hsmc_init);
+core_initcall(hsmc_init);