avr32: remove support for AVR32 architecture

This patch drops support for AVR32 architecture from the Linux kernel.

The AVR32 architecture is not keeping up with the development of the
kernel, and since it shares so much of the drivers with Atmel ARM SoC,
it is starting to hinder these drivers to develop swiftly.

Also, all AVR32 AP7 SoC processors are end of lifed from Atmel (now
Microchip).

Finally, the GCC toolchain is stuck at version 4.2.x, and has not
received any patches since the last release from Atmel;
4.2.4-atmel.1.1.3.avr32linux.1. When building kernel v4.10, this
toolchain is no longer able to properly link the network stack.

Haavard and I have came to the conclusion that we feel keeping AVR32 on
life support offers more obstacles for Atmel ARMs, than it gives joy to
AVR32 users. I also suspect there are very few AVR32 users left today,
if anybody at all.

Signed-off-by: Hans-Christian Noren Egtvedt <egtvedt@samfundet.no>
Signed-off-by: Håvard Skinnemoen <hskinnemoen@gmail.com>
Signed-off-by: Nicolas Ferre <nicolas.ferre@microchip.com>
Acked-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Acked-by: Boris Brezillon <boris.brezillon@free-electrons.com>

1 files changed, 0 insertions, 382 deletions

diff --git a/arch/avr32/boards/atngw100/mrmt.c b/arch/avr32/boards/atngw100/mrmt.c
deleted file mode 100644
index 99b0a79..0000000
--- a/arch/avr32/boards/atngw100/mrmt.c
+++ /dev/null
@@ -1,382 +0,0 @@
-/*
- * Board-specific setup code for Remote Media Terminal 1 (RMT1)
- * add-on board for the ATNGW100 Network Gateway
- *
- * Copyright (C) 2008 Mediama Technologies
- * Based on ATNGW100 Network Gateway (Copyright (C) Atmel)
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-#include <linux/gpio.h>
-#include <linux/init.h>
-#include <linux/irq.h>
-#include <linux/linkage.h>
-#include <linux/platform_device.h>
-#include <linux/types.h>
-#include <linux/fb.h>
-#include <linux/leds.h>
-#include <linux/pwm.h>
-#include <linux/leds_pwm.h>
-#include <linux/input.h>
-#include <linux/gpio_keys.h>
-#include <linux/spi/spi.h>
-#include <linux/spi/ads7846.h>
-
-#include <video/atmel_lcdc.h>
-#include <sound/atmel-ac97c.h>
-
-#include <asm/delay.h>
-#include <asm/io.h>
-#include <asm/setup.h>
-
-#include <mach/at32ap700x.h>
-#include <mach/board.h>
-#include <mach/init.h>
-#include <mach/portmux.h>
-
-/* Define board-specifoic GPIO assignments */
-#define PIN_LCD_BL	GPIO_PIN_PA(28)
-#define PWM_CH_BL	0	/* Must match with GPIO pin definition */
-#define PIN_LCD_DISP	GPIO_PIN_PA(31)
-#define	PIN_AC97_RST_N	GPIO_PIN_PA(30)
-#define PB_EXTINT_BASE	25
-#define TS_IRQ		0
-#define PIN_TS_EXTINT	GPIO_PIN_PB(PB_EXTINT_BASE+TS_IRQ)
-#define PIN_PB_LEFT	GPIO_PIN_PB(11)
-#define PIN_PB_RIGHT	GPIO_PIN_PB(12)
-#define PIN_PWR_SW_N	GPIO_PIN_PB(14)
-#define PIN_PWR_ON	GPIO_PIN_PB(13)
-#define PIN_ZB_RST_N	GPIO_PIN_PA(21)
-#define PIN_BT_RST	GPIO_PIN_PA(22)
-#define PIN_LED_SYS	GPIO_PIN_PA(16)
-#define PIN_LED_A	GPIO_PIN_PA(19)
-#define PIN_LED_B	GPIO_PIN_PE(19)
-
-#ifdef CONFIG_BOARD_MRMT_LCD_LQ043T3DX0X
-/* Sharp LQ043T3DX0x (or compatible) panel */
-static struct fb_videomode __initdata lcd_fb_modes[] = {
-	{
-		.name		= "480x272 @ 59.94Hz",
-		.refresh	= 59.94,
-		.xres		= 480,		.yres		= 272,
-		.pixclock	= KHZ2PICOS(9000),
-
-		.left_margin	= 2,		.right_margin	= 2,
-		.upper_margin	= 3,		.lower_margin	= 9,
-		.hsync_len	= 41,		.vsync_len	= 1,
-
-		.sync		= 0,
-		.vmode		= FB_VMODE_NONINTERLACED,
-	},
-};
-
-static struct fb_monspecs __initdata lcd_fb_default_monspecs = {
-	.manufacturer		= "SHA",
-	.monitor		= "LQ043T3DX02",
-	.modedb			= lcd_fb_modes,
-	.modedb_len		= ARRAY_SIZE(lcd_fb_modes),
-	.hfmin			= 14915,
-	.hfmax			= 17638,
-	.vfmin			= 53,
-	.vfmax			= 61,
-	.dclkmax		= 9260000,
-};
-
-static struct atmel_lcdfb_pdata __initdata rmt_lcdc_data = {
-	.default_bpp		= 24,
-	.default_dmacon		= ATMEL_LCDC_DMAEN | ATMEL_LCDC_DMA2DEN,
-	.default_lcdcon2	= (ATMEL_LCDC_DISTYPE_TFT
-				   | ATMEL_LCDC_CLKMOD_ALWAYSACTIVE
-				   | ATMEL_LCDC_INVCLK_NORMAL
-				   | ATMEL_LCDC_MEMOR_BIG),
-	.lcd_wiring_mode	= ATMEL_LCDC_WIRING_RGB,
-	.default_monspecs	= &lcd_fb_default_monspecs,
-	.guard_time		= 2,
-};
-#endif
-
-#ifdef CONFIG_BOARD_MRMT_LCD_KWH043GM08
-/* Sharp KWH043GM08-Fxx (or compatible) panel */
-static struct fb_videomode __initdata lcd_fb_modes[] = {
-	{
-		.name		= "480x272 @ 59.94Hz",
-		.refresh	= 59.94,
-		.xres		= 480,		.yres		= 272,
-		.pixclock	= KHZ2PICOS(9000),
-
-		.left_margin	= 2,		.right_margin	= 2,
-		.upper_margin	= 3,		.lower_margin	= 9,
-		.hsync_len	= 41,		.vsync_len	= 1,
-
-		.sync		= 0,
-		.vmode		= FB_VMODE_NONINTERLACED,
-	},
-};
-
-static struct fb_monspecs __initdata lcd_fb_default_monspecs = {
-	.manufacturer		= "FOR",
-	.monitor		= "KWH043GM08",
-	.modedb			= lcd_fb_modes,
-	.modedb_len		= ARRAY_SIZE(lcd_fb_modes),
-	.hfmin			= 14915,
-	.hfmax			= 17638,
-	.vfmin			= 53,
-	.vfmax			= 61,
-	.dclkmax		= 9260000,
-};
-
-static struct atmel_lcdfb_pdata __initdata rmt_lcdc_data = {
-	.default_bpp		= 24,
-	.default_dmacon		= ATMEL_LCDC_DMAEN | ATMEL_LCDC_DMA2DEN,
-	.default_lcdcon2	= (ATMEL_LCDC_DISTYPE_TFT
-				   | ATMEL_LCDC_CLKMOD_ALWAYSACTIVE
-				   | ATMEL_LCDC_INVCLK_INVERTED
-				   | ATMEL_LCDC_MEMOR_BIG),
-	.lcd_wiring_mode	= ATMEL_LCDC_WIRING_RGB,
-	.default_monspecs	= &lcd_fb_default_monspecs,
-	.guard_time		= 2,
-};
-#endif
-
-#ifdef CONFIG_BOARD_MRMT_AC97
-static struct ac97c_platform_data __initdata ac97c0_data = {
-	.reset_pin		= PIN_AC97_RST_N,
-};
-#endif
-
-#ifdef CONFIG_BOARD_MRMT_UCB1400_TS
-/* NOTE: IRQ assignment relies on kernel module parameter */
-static struct platform_device rmt_ts_device = {
-	.name	= "ucb1400_ts",
-	.id	= -1,
-};
-#endif
-
-#ifdef CONFIG_BOARD_MRMT_BL_PWM
-/* PWM LEDs: LCD Backlight, etc */
-static struct pwm_lookup pwm_lookup[] = {
-	PWM_LOOKUP("at91sam9rl-pwm", PWM_CH_BL, "leds_pwm", "ds1",
-		   5000, PWM_POLARITY_INVERSED),
-};
-
-static struct led_pwm pwm_leds[] = {
-	{
-		.name = "backlight",
-		.max_brightness = 255,
-	},
-};
-
-static struct led_pwm_platform_data pwm_data = {
-	.num_leds       = ARRAY_SIZE(pwm_leds),
-	.leds           = pwm_leds,
-};
-
-static struct platform_device leds_pwm = {
-	.name   = "leds_pwm",
-	.id     = -1,
-	.dev    = {
-		.platform_data = &pwm_data,
-	},
-};
-#endif
-
-#ifdef CONFIG_BOARD_MRMT_ADS7846_TS
-static int ads7846_pendown_state(void)
-{
-	return !gpio_get_value( PIN_TS_EXTINT );	/* PENIRQ.*/
-}
-
-static struct ads7846_platform_data ads_info = {
-	.model				= 7846,
-	.keep_vref_on			= 0,	/* Use external VREF pin */
-	.vref_delay_usecs		= 0,
-	.vref_mv			= 3300,	/* VREF = 3.3V */
-	.settle_delay_usecs		= 800,
-	.penirq_recheck_delay_usecs	= 800,
-	.x_plate_ohms			= 750,
-	.y_plate_ohms			= 300,
-	.pressure_max			= 4096,
-	.debounce_max			= 1,
-	.debounce_rep			= 0,
-	.debounce_tol			= (~0),
-	.get_pendown_state		= ads7846_pendown_state,
-	.filter				= NULL,
-	.filter_init			= NULL,
-};
-
-static struct spi_board_info spi01_board_info[] __initdata = {
-	{
-		.modalias	= "ads7846",
-		.max_speed_hz	= 31250*26,
-		.bus_num	= 0,
-		.chip_select	= 1,
-		.platform_data	= &ads_info,
-		.irq		= AT32_EXTINT(TS_IRQ),
-	},
-};
-#endif
-
-/* GPIO Keys: left, right, power, etc */
-static const struct gpio_keys_button rmt_gpio_keys_buttons[] = {
-	[0] = {
-		.type		= EV_KEY,
-		.code		= KEY_POWER,
-		.gpio		= PIN_PWR_SW_N,
-		.active_low	= 1,
-		.desc		= "power button",
-	},
-	[1] = {
-		.type		= EV_KEY,
-		.code		= KEY_LEFT,
-		.gpio		= PIN_PB_LEFT,
-		.active_low	= 1,
-		.desc		= "left button",
-	},
-	[2] = {
-		.type		= EV_KEY,
-		.code		= KEY_RIGHT,
-		.gpio		= PIN_PB_RIGHT,
-		.active_low	= 1,
-		.desc		= "right button",
-	},
-};
-
-static const struct gpio_keys_platform_data rmt_gpio_keys_data = {
-	.nbuttons =	ARRAY_SIZE(rmt_gpio_keys_buttons),
-	.buttons =	(void *) rmt_gpio_keys_buttons,
-};
-
-static struct platform_device rmt_gpio_keys = {
-	.name =		"gpio-keys",
-	.id =		-1,
-	.dev = {
-		.platform_data = (void *) &rmt_gpio_keys_data,
-	}
-};
-
-#ifdef CONFIG_BOARD_MRMT_RTC_I2C
-static struct i2c_board_info __initdata mrmt1_i2c_rtc = {
-	I2C_BOARD_INFO("s35390a", 0x30),
-	.irq		= 0,
-};
-#endif
-
-static void mrmt_power_off(void)
-{
-	/* PWR_ON=0 will force power off */
-	gpio_set_value( PIN_PWR_ON, 0 );
-}
-
-static int __init mrmt1_init(void)
-{
-	gpio_set_value( PIN_PWR_ON, 1 );	/* Ensure PWR_ON is enabled */
-
-	pm_power_off = mrmt_power_off;
-
-	/* Setup USARTS (other than console) */
-	at32_map_usart(2, 1, 0);	/* USART 2: /dev/ttyS1, RMT1:DB9M */
-	at32_map_usart(3, 2, ATMEL_USART_RTS | ATMEL_USART_CTS);
-			/* USART 3: /dev/ttyS2, RMT1:Wireless, w/ RTS/CTS */
-	at32_add_device_usart(1);
-	at32_add_device_usart(2);
-
-	/* Select GPIO Key pins */
-	at32_select_gpio( PIN_PWR_SW_N, AT32_GPIOF_DEGLITCH);
-	at32_select_gpio( PIN_PB_LEFT, AT32_GPIOF_DEGLITCH);
-	at32_select_gpio( PIN_PB_RIGHT, AT32_GPIOF_DEGLITCH);
-	platform_device_register(&rmt_gpio_keys);
-
-#ifdef CONFIG_BOARD_MRMT_RTC_I2C
-	i2c_register_board_info(0, &mrmt1_i2c_rtc, 1);
-#endif
-
-#ifndef CONFIG_BOARD_MRMT_LCD_DISABLE
-	/* User "alternate" LCDC inferface on Port E & D */
-	/* NB: exclude LCDC_CC pin, as NGW100 reserves it for other use */
-	at32_add_device_lcdc(0, &rmt_lcdc_data,
-		fbmem_start, fbmem_size,
-		(ATMEL_LCDC_ALT_24BIT | ATMEL_LCDC_PE_DVAL ) );
-#endif
-
-#ifdef CONFIG_BOARD_MRMT_AC97
-	at32_add_device_ac97c(0, &ac97c0_data, AC97C_BOTH);
-#endif
-
-#ifdef CONFIG_BOARD_MRMT_ADS7846_TS
-	/* Select the Touchscreen interrupt pin mode */
-	at32_select_periph( GPIO_PIOB_BASE, 1 << (PB_EXTINT_BASE+TS_IRQ),
-			GPIO_PERIPH_A, AT32_GPIOF_DEGLITCH);
-	irq_set_irq_type(AT32_EXTINT(TS_IRQ), IRQ_TYPE_EDGE_FALLING);
-	at32_spi_setup_slaves(0,spi01_board_info,ARRAY_SIZE(spi01_board_info));
-	spi_register_board_info(spi01_board_info,ARRAY_SIZE(spi01_board_info));
-#endif
-
-#ifdef CONFIG_BOARD_MRMT_UCB1400_TS
-	/* Select the Touchscreen interrupt pin mode */
-	at32_select_periph( GPIO_PIOB_BASE, 1 << (PB_EXTINT_BASE+TS_IRQ),
-			GPIO_PERIPH_A, AT32_GPIOF_DEGLITCH);
-	platform_device_register(&rmt_ts_device);
-#endif
-
-	at32_select_gpio( PIN_LCD_DISP, AT32_GPIOF_OUTPUT );
-	gpio_request( PIN_LCD_DISP, "LCD_DISP" );
-	gpio_direction_output( PIN_LCD_DISP, 0 );	/* LCD DISP */
-#ifdef CONFIG_BOARD_MRMT_LCD_DISABLE
-	/* Keep Backlight and DISP off */
-	at32_select_gpio( PIN_LCD_BL, AT32_GPIOF_OUTPUT );
-	gpio_request( PIN_LCD_BL, "LCD_BL" );
-	gpio_direction_output( PIN_LCD_BL, 0 );		/* Backlight */
-#else
-	gpio_set_value( PIN_LCD_DISP, 1 );	/* DISP asserted first */
-#ifdef CONFIG_BOARD_MRMT_BL_PWM
-	/* Use PWM for Backlight controls */
-	at32_add_device_pwm(1 << PWM_CH_BL);
-	pwm_add_table(pwm_lookup, ARRAY_SIZE(pwm_lookup));
-	platform_device_register(&leds_pwm);
-#else
-	/* Backlight always on */
-	udelay( 1 );
-	at32_select_gpio( PIN_LCD_BL, AT32_GPIOF_OUTPUT );
-	gpio_request( PIN_LCD_BL, "LCD_BL" );
-	gpio_direction_output( PIN_LCD_BL, 1 );
-#endif
-#endif
-
-	/* Make sure BT and Zigbee modules in reset */
-	at32_select_gpio( PIN_BT_RST, AT32_GPIOF_OUTPUT );
-	gpio_request( PIN_BT_RST, "BT_RST" );
-	gpio_direction_output( PIN_BT_RST, 1 );
-	/* BT Module in Reset */
-
-	at32_select_gpio( PIN_ZB_RST_N, AT32_GPIOF_OUTPUT );
-	gpio_request( PIN_ZB_RST_N, "ZB_RST_N" );
-	gpio_direction_output( PIN_ZB_RST_N, 0 );
-	/* XBee Module in Reset */
-
-#ifdef CONFIG_BOARD_MRMT_WIRELESS_ZB
-	udelay( 1000 );
-	/* Unreset the XBee Module */
-	gpio_set_value( PIN_ZB_RST_N, 1 );
-#endif
-#ifdef CONFIG_BOARD_MRMT_WIRELESS_BT
-	udelay( 1000 );
-	/* Unreset the BT Module */
-	gpio_set_value( PIN_BT_RST, 0 );
-#endif
-
-	return 0;
-}
-arch_initcall(mrmt1_init);
-
-static int __init mrmt1_early_init(void)
-{
-	/* To maintain power-on signal in case boot loader did not already */
-	at32_select_gpio( PIN_PWR_ON, AT32_GPIOF_OUTPUT );
-	gpio_request( PIN_PWR_ON, "PIN_PWR_ON" );
-	gpio_direction_output( PIN_PWR_ON, 1 );
-
-	return 0;
-}
-core_initcall(mrmt1_early_init);