Merge tag 'usb-for-v3.10' of git://git.kernel.org/pub/scm/linux/kernel/git/balbi/usb into usb-next

Felipe writes:

usb: patches for v3.10 merge window

Here is the big Gadget & PHY pull request. Many of us have
been really busy lately getting multiple drivers to a better
position.

Since this pull request is so large, I will divide it in sections
so it's easier to grasp what's included.

- cleanups:
	. UDC drivers no longer touch gadget->dev, that's now udc-core
		responsibility
	. Many more UDC drivers converted to usb_gadget_map/unmap_request()
	. UDC drivers no longer initialize DMA-related fields from gadget's
		device structure
	. UDC drivers don't touch gadget.dev.driver directly
	. UDC drivers don't assign gadget.dev.release directly
	. Removal of some unused DMA_ADDR_INVALID
	. Introduction of CONFIG_USB_PHY
	. All phy drivers have been moved to drivers/usb/phy and renamed to
		a common naming scheme
	. Fix PHY layer so it never returns a NULL pointer, also fix all
		callers to avoid using IS_ERR_OR_NULL()
	. Sparse fixes all over the place
	. drivers/usb/otg/ has been deleted
	. Marvel drivers (mv_udc, ehci-mv, mv_otg and mv_u3d) improved clock
		usage

- new features:
	. UDC core now provides a generic way for tracking and reporting
		UDC's state (not attached, resuming, suspended, addressed,
		default, etc)
	. twl4030-usb learned that it shouldn't be enabled during init
	. Full DT support for DWC3 has been implemented
	. ab8500-usb learned about pinctrl framework
	. nop PHY learned about DeviceTree and regulators
	. DWC3 learned about suspend/resume
	. DWC3 can now be compiled in host-only and gadget-only (as well as
		DRD) configurations
	. UVC now enables streaming endpoint based on negotiated speed
	. isp1301 now implements the PHY API properly
	. configfs-based interface for gadget drivers which will lead to
		the removal of all code which just combines functions together
		to build functional gadget drivers.
	. f_serial and f_obex were converted to new configfs interface while
		maintaining old interface around.

- non-critical fixes:
	. UVC gadget driver got fixes for Endpoint usage and stream calculation
	. ab8500-usb fixed unbalanced clock and regulator API usage
	. twl4030-usb got a fix for when OMAP3 is booted with cable connected
	. fusb300_udc got a fix for DMA usage
	. UVC got fixes for two assertions of the USB Video Class Compliance
		specification revision 1.1
	. build warning issues caused by recent addition of __must_check to
		regulator API

These are all changes which deserve a mention, all other changes are related
to these one or minor spelling fixes and other similar tasks.

Signed-of-by: Felipe Balbi <balbi@ti.com>

6 files changed, 25 insertions, 23 deletions

diff --git a/arch/arm/mach-mmp/aspenite.c b/arch/arm/mach-mmp/aspenite.c
index 9f64d56..76901f4 100644
--- a/arch/arm/mach-mmp/aspenite.c
+++ b/arch/arm/mach-mmp/aspenite.c
@@ -223,13 +223,7 @@ static struct pxa27x_keypad_platform_data aspenite_keypad_info __initdata = {
 };
 
 #if defined(CONFIG_USB_EHCI_MV)
-static char *pxa168_sph_clock_name[] = {
-	[0] = "PXA168-USBCLK",
-};
-
 static struct mv_usb_platform_data pxa168_sph_pdata = {
-	.clknum         = 1,
-	.clkname        = pxa168_sph_clock_name,
 	.mode           = MV_USB_MODE_HOST,
 	.phy_init	= pxa_usb_phy_init,
 	.phy_deinit	= pxa_usb_phy_deinit,
diff --git a/arch/arm/mach-mmp/ttc_dkb.c b/arch/arm/mach-mmp/ttc_dkb.c
index 22a9058..6528a5f 100644
--- a/arch/arm/mach-mmp/ttc_dkb.c
+++ b/arch/arm/mach-mmp/ttc_dkb.c
@@ -162,13 +162,7 @@ static struct i2c_board_info ttc_dkb_i2c_info[] = {
 #ifdef CONFIG_USB_SUPPORT
 #if defined(CONFIG_USB_MV_UDC) || defined(CONFIG_USB_EHCI_MV_U2O)
 
-static char *pxa910_usb_clock_name[] = {
-	[0] = "U2OCLK",
-};
-
 static struct mv_usb_platform_data ttc_usb_pdata = {
-	.clknum		= 1,
-	.clkname	= pxa910_usb_clock_name,
 	.vbus		= NULL,
 	.mode		= MV_USB_MODE_OTG,
 	.otg_force_a_bus_req = 1,
diff --git a/arch/arm/mach-shmobile/board-armadillo800eva.c b/arch/arm/mach-shmobile/board-armadillo800eva.c
index f2ec077..ff8b7ba 100644
--- a/arch/arm/mach-shmobile/board-armadillo800eva.c
+++ b/arch/arm/mach-shmobile/board-armadillo800eva.c
@@ -169,7 +169,7 @@ static int usbhsf_get_id(struct platform_device *pdev)
 	return USBHS_GADGET;
 }
 
-static void usbhsf_power_ctrl(struct platform_device *pdev,
+static int usbhsf_power_ctrl(struct platform_device *pdev,
 			      void __iomem *base, int enable)
 {
 	struct usbhsf_private *priv = usbhsf_get_priv(pdev);
@@ -223,6 +223,8 @@ static void usbhsf_power_ctrl(struct platform_device *pdev,
 		clk_disable(priv->pci);		/* usb work around */
 		clk_disable(priv->usb24);	/* usb work around */
 	}
+
+	return 0;
 }
 
 static int usbhsf_get_vbus(struct platform_device *pdev)
@@ -239,7 +241,7 @@ static irqreturn_t usbhsf_interrupt(int irq, void *data)
 	return IRQ_HANDLED;
 }
 
-static void usbhsf_hardware_exit(struct platform_device *pdev)
+static int usbhsf_hardware_exit(struct platform_device *pdev)
 {
 	struct usbhsf_private *priv = usbhsf_get_priv(pdev);
 
@@ -264,6 +266,8 @@ static void usbhsf_hardware_exit(struct platform_device *pdev)
 	priv->usbh_base	= NULL;
 
 	free_irq(IRQ7, pdev);
+
+	return 0;
 }
 
 static int usbhsf_hardware_init(struct platform_device *pdev)
diff --git a/arch/arm/mach-shmobile/board-kzm9g.c b/arch/arm/mach-shmobile/board-kzm9g.c
index 7f3a6b7..a385f57 100644
--- a/arch/arm/mach-shmobile/board-kzm9g.c
+++ b/arch/arm/mach-shmobile/board-kzm9g.c
@@ -155,12 +155,14 @@ static int usbhs_get_vbus(struct platform_device *pdev)
 	return !((1 << 7) & __raw_readw(priv->cr2));
 }
 
-static void usbhs_phy_reset(struct platform_device *pdev)
+static int usbhs_phy_reset(struct platform_device *pdev)
 {
 	struct usbhs_private *priv = usbhs_get_priv(pdev);
 
 	/* init phy */
 	__raw_writew(0x8a0a, priv->cr2);
+
+	return 0;
 }
 
 static int usbhs_get_id(struct platform_device *pdev)
@@ -202,7 +204,7 @@ static int usbhs_hardware_init(struct platform_device *pdev)
 	return 0;
 }
 
-static void usbhs_hardware_exit(struct platform_device *pdev)
+static int usbhs_hardware_exit(struct platform_device *pdev)
 {
 	struct usbhs_private *priv = usbhs_get_priv(pdev);
 
@@ -210,6 +212,8 @@ static void usbhs_hardware_exit(struct platform_device *pdev)
 	__raw_writew(USB_PHY_MODE | USB_PHY_INT_CLR, priv->phy);
 
 	free_irq(IRQ15, pdev);
+
+	return 0;
 }
 
 static u32 usbhs_pipe_cfg[] = {
diff --git a/arch/arm/mach-shmobile/board-mackerel.c b/arch/arm/mach-shmobile/board-mackerel.c
index db968a5..979237c 100644
--- a/arch/arm/mach-shmobile/board-mackerel.c
+++ b/arch/arm/mach-shmobile/board-mackerel.c
@@ -596,12 +596,14 @@ static int usbhs_get_vbus(struct platform_device *pdev)
 	return usbhs_is_connected(usbhs_get_priv(pdev));
 }
 
-static void usbhs_phy_reset(struct platform_device *pdev)
+static int usbhs_phy_reset(struct platform_device *pdev)
 {
 	struct usbhs_private *priv = usbhs_get_priv(pdev);
 
 	/* init phy */
 	__raw_writew(0x8a0a, priv->usbcrcaddr);
+
+	return 0;
 }
 
 static int usbhs0_get_id(struct platform_device *pdev)
@@ -628,11 +630,13 @@ static int usbhs0_hardware_init(struct platform_device *pdev)
 	return 0;
 }
 
-static void usbhs0_hardware_exit(struct platform_device *pdev)
+static int usbhs0_hardware_exit(struct platform_device *pdev)
 {
 	struct usbhs_private *priv = usbhs_get_priv(pdev);
 
 	cancel_delayed_work_sync(&priv->work);
+
+	return 0;
 }
 
 static struct usbhs_private usbhs0_private = {
@@ -735,7 +739,7 @@ static int usbhs1_hardware_init(struct platform_device *pdev)
 	return 0;
 }
 
-static void usbhs1_hardware_exit(struct platform_device *pdev)
+static int usbhs1_hardware_exit(struct platform_device *pdev)
 {
 	struct usbhs_private *priv = usbhs_get_priv(pdev);
 
@@ -743,6 +747,8 @@ static void usbhs1_hardware_exit(struct platform_device *pdev)
 	__raw_writew(USB_PHY_MODE | USB_PHY_INT_CLR, priv->usbphyaddr);
 
 	free_irq(IRQ8, pdev);
+
+	return 0;
 }
 
 static int usbhs1_get_id(struct platform_device *pdev)
diff --git a/arch/arm/mach-tegra/Kconfig b/arch/arm/mach-tegra/Kconfig
index d1c4893..dbc653e 100644
--- a/arch/arm/mach-tegra/Kconfig
+++ b/arch/arm/mach-tegra/Kconfig
@@ -18,8 +18,8 @@ config ARCH_TEGRA_2x_SOC
 	select PL310_ERRATA_727915 if CACHE_L2X0
 	select PL310_ERRATA_769419 if CACHE_L2X0
 	select USB_ARCH_HAS_EHCI if USB_SUPPORT
-	select USB_ULPI if USB
-	select USB_ULPI_VIEWPORT if USB_SUPPORT
+	select USB_ULPI if USB_PHY
+	select USB_ULPI_VIEWPORT if USB_PHY
 	help
 	  Support for NVIDIA Tegra AP20 and T20 processors, based on the
 	  ARM CortexA9MP CPU and the ARM PL310 L2 cache controller
@@ -37,8 +37,8 @@ config ARCH_TEGRA_3x_SOC
 	select PINCTRL_TEGRA30
 	select PL310_ERRATA_769419 if CACHE_L2X0
 	select USB_ARCH_HAS_EHCI if USB_SUPPORT
-	select USB_ULPI if USB
-	select USB_ULPI_VIEWPORT if USB_SUPPORT
+	select USB_ULPI if USB_PHY
+	select USB_ULPI_VIEWPORT if USB_PHY
 	help
 	  Support for NVIDIA Tegra T30 processor family, based on the
 	  ARM CortexA9MP CPU and the ARM PL310 L2 cache controller