summaryrefslogtreecommitdiffstats
path: root/arch/arm
diff options
context:
space:
mode:
authorDirk Behme <dirk.behme@gmail.com>2013-04-22 08:00:34 +0200
committerShawn Guo <shawn.guo@linaro.org>2013-05-12 21:35:29 +0800
commit0e574461c4c915a065dd75c894edb653ce99be9c (patch)
treea34ef4dabc46b6371b764f624b238587e45588fc /arch/arm
parent72cd7447e72a13ce72d760b42ec295430f77300a (diff)
downloadop-kernel-dev-0e574461c4c915a065dd75c894edb653ce99be9c.zip
op-kernel-dev-0e574461c4c915a065dd75c894edb653ce99be9c.tar.gz
ARM i.MX6: correct MLB clock configuration
According to the i.MX6 Dual/Quad technical reference manual (Figure 18-2. Clock Tree - Part 1) the MLB clock is directly feed by the AXI_CLK_ROOT. This is called 'axi' in our code. Note that the clock of the MLB IP block on the i.MX6 is completely independent of the PLL8 (MLB PLL). The MLB PLL isn't responsible for feeding the MLB IP block with a clock. Instead, it's used internally by the MLB module to sync the bus clock in case the MLB 6-pin interface is enabled: MediaLB Control 0 Register, MLB150_MLBC0[5], MLBPEN: 1 MediaLB 6-pin interface enabled. MLB PLL and MLB PHY is enabled in this case. I.e. the PLL8 MLB PLL has to be handled by the MLB driver and isn't needed for clocking the MLB module itself. Signed-off-by: Dirk Behme <dirk.behme@de.bosch.com> CC: Jiada Wang <Jiada_Wang@mentor.com> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
Diffstat (limited to 'arch/arm')
-rw-r--r--arch/arm/mach-imx/clk-imx6q.c2
1 files changed, 1 insertions, 1 deletions
diff --git a/arch/arm/mach-imx/clk-imx6q.c b/arch/arm/mach-imx/clk-imx6q.c
index ca17171..f2e1c62 100644
--- a/arch/arm/mach-imx/clk-imx6q.c
+++ b/arch/arm/mach-imx/clk-imx6q.c
@@ -499,7 +499,7 @@ int __init mx6q_clocks_init(void)
clk[ldb_di1] = imx_clk_gate2("ldb_di1", "ldb_di1_podf", base + 0x74, 14);
clk[ipu2_di1] = imx_clk_gate2("ipu2_di1", "ipu2_di1_sel", base + 0x74, 10);
clk[hsi_tx] = imx_clk_gate2("hsi_tx", "hsi_tx_podf", base + 0x74, 16);
- clk[mlb] = imx_clk_gate2("mlb", "pll8_mlb", base + 0x74, 18);
+ clk[mlb] = imx_clk_gate2("mlb", "axi", base + 0x74, 18);
clk[mmdc_ch0_axi] = imx_clk_gate2("mmdc_ch0_axi", "mmdc_ch0_axi_podf", base + 0x74, 20);
clk[mmdc_ch1_axi] = imx_clk_gate2("mmdc_ch1_axi", "mmdc_ch1_axi_podf", base + 0x74, 22);
clk[ocram] = imx_clk_gate2("ocram", "ahb", base + 0x74, 28);
OpenPOWER on IntegriCloud