Merge commit '683b6c6f82a60fabf47012581c2cfbf1b037ab95' into stable/for-linus-3.15

This merge of the irq-core-for-linus branch broke the ARM build when
Xen is enabled.

Conflicts:
	drivers/xen/events/events_base.c

43 files changed, 258 insertions, 686 deletions

diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index e254198..1594945 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -1578,6 +1578,7 @@ config BL_SWITCHER_DUMMY_IF
 
 choice
 	prompt "Memory split"
+	depends on MMU
 	default VMSPLIT_3G
 	help
 	  Select the desired split between kernel and user memory.
@@ -1595,6 +1596,7 @@ endchoice
 
 config PAGE_OFFSET
 	hex
+	default PHYS_OFFSET if !MMU
 	default 0x40000000 if VMSPLIT_1G
 	default 0x80000000 if VMSPLIT_2G
 	default 0xC0000000
@@ -1903,6 +1905,7 @@ config XEN
 	depends on ARM && AEABI && OF
 	depends on CPU_V7 && !CPU_V6
 	depends on !GENERIC_ATOMIC64
+	depends on MMU
 	select ARM_PSCI
 	select SWIOTLB_XEN
 	select ARCH_DMA_ADDR_T_64BIT
diff --git a/arch/arm/boot/compressed/.gitignore b/arch/arm/boot/compressed/.gitignore
index 47279aa..0714e03 100644
--- a/arch/arm/boot/compressed/.gitignore
+++ b/arch/arm/boot/compressed/.gitignore
@@ -1,4 +1,5 @@
 ashldi3.S
+bswapsdi2.S
 font.c
 lib1funcs.S
 hyp-stub.S
diff --git a/arch/arm/boot/dts/bcm11351.dtsi b/arch/arm/boot/dts/bcm11351.dtsi
index e491b82..792fde1 100644
--- a/arch/arm/boot/dts/bcm11351.dtsi
+++ b/arch/arm/boot/dts/bcm11351.dtsi
@@ -147,7 +147,7 @@
 	};
 
 	pinctrl@35004800 {
-		compatible = "brcm,capri-pinctrl";
+		compatible = "brcm,bcm11351-pinctrl";
 		reg = <0x35004800 0x430>;
 	};
 
diff --git a/arch/arm/boot/dts/keystone-clocks.dtsi b/arch/arm/boot/dts/keystone-clocks.dtsi
index 2363593..ef58d1c 100644
--- a/arch/arm/boot/dts/keystone-clocks.dtsi
+++ b/arch/arm/boot/dts/keystone-clocks.dtsi
@@ -612,7 +612,7 @@ clocks {
 		compatible = "ti,keystone,psc-clock";
 		clocks = <&chipclk13>;
 		clock-output-names = "vcp-3";
-		reg = <0x0235000a8 0xb00>, <0x02350060 0x400>;
+		reg = <0x023500a8 0xb00>, <0x02350060 0x400>;
 		reg-names = "control", "domain";
 		domain-id = <24>;
 	};
diff --git a/arch/arm/boot/dts/omap3-gta04.dts b/arch/arm/boot/dts/omap3-gta04.dts
index c551e4a..d3b253b 100644
--- a/arch/arm/boot/dts/omap3-gta04.dts
+++ b/arch/arm/boot/dts/omap3-gta04.dts
@@ -13,7 +13,7 @@
 
 / {
 	model = "OMAP3 GTA04";
-	compatible = "ti,omap3-gta04", "ti,omap3";
+	compatible = "ti,omap3-gta04", "ti,omap36xx", "ti,omap3";
 
 	cpus {
 		cpu@0 {
diff --git a/arch/arm/boot/dts/omap3-igep0020.dts b/arch/arm/boot/dts/omap3-igep0020.dts
index 25a2b5f..f2779ac 100644
--- a/arch/arm/boot/dts/omap3-igep0020.dts
+++ b/arch/arm/boot/dts/omap3-igep0020.dts
@@ -14,7 +14,7 @@
 
 / {
 	model = "IGEPv2 (TI OMAP AM/DM37x)";
-	compatible = "isee,omap3-igep0020", "ti,omap3";
+	compatible = "isee,omap3-igep0020", "ti,omap36xx", "ti,omap3";
 
 	leds {
 		pinctrl-names = "default";
diff --git a/arch/arm/boot/dts/omap3-igep0030.dts b/arch/arm/boot/dts/omap3-igep0030.dts
index 145c58c..2793749 100644
--- a/arch/arm/boot/dts/omap3-igep0030.dts
+++ b/arch/arm/boot/dts/omap3-igep0030.dts
@@ -13,7 +13,7 @@
 
 / {
 	model = "IGEP COM MODULE (TI OMAP AM/DM37x)";
-	compatible = "isee,omap3-igep0030", "ti,omap3";
+	compatible = "isee,omap3-igep0030", "ti,omap36xx", "ti,omap3";
 
 	leds {
 		pinctrl-names = "default";
diff --git a/arch/arm/boot/dts/sama5d36.dtsi b/arch/arm/boot/dts/sama5d36.dtsi
index 6c31c26..db58cad 100644
--- a/arch/arm/boot/dts/sama5d36.dtsi
+++ b/arch/arm/boot/dts/sama5d36.dtsi
@@ -8,8 +8,8 @@
  */
 #include "sama5d3.dtsi"
 #include "sama5d3_can.dtsi"
-#include "sama5d3_emac.dtsi"
 #include "sama5d3_gmac.dtsi"
+#include "sama5d3_emac.dtsi"
 #include "sama5d3_lcd.dtsi"
 #include "sama5d3_mci2.dtsi"
 #include "sama5d3_tcb1.dtsi"
diff --git a/arch/arm/boot/dts/sun4i-a10.dtsi b/arch/arm/boot/dts/sun4i-a10.dtsi
index 10666ca..249b6e0 100644
--- a/arch/arm/boot/dts/sun4i-a10.dtsi
+++ b/arch/arm/boot/dts/sun4i-a10.dtsi
@@ -331,7 +331,7 @@
 		};
 
 		intc: interrupt-controller@01c20400 {
-			compatible = "allwinner,sun4i-ic";
+			compatible = "allwinner,sun4i-a10-ic";
 			reg = <0x01c20400 0x400>;
 			interrupt-controller;
 			#interrupt-cells = <1>;
@@ -403,7 +403,7 @@
 		};
 
 		timer@01c20c00 {
-			compatible = "allwinner,sun4i-timer";
+			compatible = "allwinner,sun4i-a10-timer";
 			reg = <0x01c20c00 0x90>;
 			interrupts = <22>;
 			clocks = <&osc24M>;
@@ -426,7 +426,7 @@
 		};
 
 		rtp: rtp@01c25000 {
-			compatible = "allwinner,sun4i-ts";
+			compatible = "allwinner,sun4i-a10-ts";
 			reg = <0x01c25000 0x100>;
 			interrupts = <29>;
 		};
diff --git a/arch/arm/boot/dts/sun5i-a10s.dtsi b/arch/arm/boot/dts/sun5i-a10s.dtsi
index 6496159..ddb2545 100644
--- a/arch/arm/boot/dts/sun5i-a10s.dtsi
+++ b/arch/arm/boot/dts/sun5i-a10s.dtsi
@@ -294,7 +294,7 @@
 		};
 
 		intc: interrupt-controller@01c20400 {
-			compatible = "allwinner,sun4i-ic";
+			compatible = "allwinner,sun4i-a10-ic";
 			reg = <0x01c20400 0x400>;
 			interrupt-controller;
 			#interrupt-cells = <1>;
@@ -366,7 +366,7 @@
 		};
 
 		timer@01c20c00 {
-			compatible = "allwinner,sun4i-timer";
+			compatible = "allwinner,sun4i-a10-timer";
 			reg = <0x01c20c00 0x90>;
 			interrupts = <22>;
 			clocks = <&osc24M>;
@@ -383,7 +383,7 @@
 		};
 
 		rtp: rtp@01c25000 {
-			compatible = "allwinner,sun4i-ts";
+			compatible = "allwinner,sun4i-a10-ts";
 			reg = <0x01c25000 0x100>;
 			interrupts = <29>;
 		};
diff --git a/arch/arm/boot/dts/sun5i-a13.dtsi b/arch/arm/boot/dts/sun5i-a13.dtsi
index 320335a..b373c74 100644
--- a/arch/arm/boot/dts/sun5i-a13.dtsi
+++ b/arch/arm/boot/dts/sun5i-a13.dtsi
@@ -275,7 +275,7 @@
 		ranges;
 
 		intc: interrupt-controller@01c20400 {
-			compatible = "allwinner,sun4i-ic";
+			compatible = "allwinner,sun4i-a10-ic";
 			reg = <0x01c20400 0x400>;
 			interrupt-controller;
 			#interrupt-cells = <1>;
@@ -329,7 +329,7 @@
 		};
 
 		timer@01c20c00 {
-			compatible = "allwinner,sun4i-timer";
+			compatible = "allwinner,sun4i-a10-timer";
 			reg = <0x01c20c00 0x90>;
 			interrupts = <22>;
 			clocks = <&osc24M>;
@@ -346,7 +346,7 @@
 		};
 
 		rtp: rtp@01c25000 {
-			compatible = "allwinner,sun4i-ts";
+			compatible = "allwinner,sun4i-a10-ts";
 			reg = <0x01c25000 0x100>;
 			interrupts = <29>;
 		};
diff --git a/arch/arm/boot/dts/sun6i-a31.dtsi b/arch/arm/boot/dts/sun6i-a31.dtsi
index 5256ad9..38d43fe 100644
--- a/arch/arm/boot/dts/sun6i-a31.dtsi
+++ b/arch/arm/boot/dts/sun6i-a31.dtsi
@@ -190,6 +190,14 @@
 		#size-cells = <1>;
 		ranges;
 
+		nmi_intc: interrupt-controller@01f00c0c {
+			compatible = "allwinner,sun6i-a31-sc-nmi";
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			reg = <0x01f00c0c 0x38>;
+			interrupts = <0 32 4>;
+		};
+
 		pio: pinctrl@01c20800 {
 			compatible = "allwinner,sun6i-a31-pinctrl";
 			reg = <0x01c20800 0x400>;
@@ -231,7 +239,7 @@
 		};
 
 		timer@01c20c00 {
-			compatible = "allwinner,sun4i-timer";
+			compatible = "allwinner,sun4i-a10-timer";
 			reg = <0x01c20c00 0xa0>;
 			interrupts = <0 18 4>,
 				     <0 19 4>,
diff --git a/arch/arm/boot/dts/sun7i-a20.dtsi b/arch/arm/boot/dts/sun7i-a20.dtsi
index 9ff0948..cadcf2f 100644
--- a/arch/arm/boot/dts/sun7i-a20.dtsi
+++ b/arch/arm/boot/dts/sun7i-a20.dtsi
@@ -339,6 +339,14 @@
 		#size-cells = <1>;
 		ranges;
 
+		nmi_intc: interrupt-controller@01c00030 {
+			compatible = "allwinner,sun7i-a20-sc-nmi";
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			reg = <0x01c00030 0x0c>;
+			interrupts = <0 0 4>;
+		};
+
 		emac: ethernet@01c0b000 {
 			compatible = "allwinner,sun4i-a10-emac";
 			reg = <0x01c0b000 0x1000>;
@@ -435,7 +443,7 @@
 		};
 
 		timer@01c20c00 {
-			compatible = "allwinner,sun4i-timer";
+			compatible = "allwinner,sun4i-a10-timer";
 			reg = <0x01c20c00 0x90>;
 			interrupts = <0 22 4>,
 				     <0 23 4>,
@@ -454,7 +462,7 @@
 		rtc: rtc@01c20d00 {
 			compatible = "allwinner,sun7i-a20-rtc";
 			reg = <0x01c20d00 0x20>;
-			interrupts = <0 24 1>;
+			interrupts = <0 24 4>;
 		};
 
 		sid: eeprom@01c23800 {
@@ -463,7 +471,7 @@
 		};
 
 		rtp: rtp@01c25000 {
-			compatible = "allwinner,sun4i-ts";
+			compatible = "allwinner,sun4i-a10-ts";
 			reg = <0x01c25000 0x100>;
 			interrupts = <0 29 4>;
 		};
@@ -596,10 +604,10 @@
 		hstimer@01c60000 {
 			compatible = "allwinner,sun7i-a20-hstimer";
 			reg = <0x01c60000 0x1000>;
-			interrupts = <0 81 1>,
-				     <0 82 1>,
-				     <0 83 1>,
-				     <0 84 1>;
+			interrupts = <0 81 4>,
+				     <0 82 4>,
+				     <0 83 4>,
+				     <0 84 4>;
 			clocks = <&ahb_gates 28>;
 		};
 
diff --git a/arch/arm/boot/dts/zynq-7000.dtsi b/arch/arm/boot/dts/zynq-7000.dtsi
index 8b67b19..789d0ba 100644
--- a/arch/arm/boot/dts/zynq-7000.dtsi
+++ b/arch/arm/boot/dts/zynq-7000.dtsi
@@ -24,6 +24,12 @@
 			device_type = "cpu";
 			reg = <0>;
 			clocks = <&clkc 3>;
+			operating-points = <
+				/* kHz    uV */
+				666667  1000000
+				333334  1000000
+				222223  1000000
+			>;
 		};
 
 		cpu@1 {
diff --git a/arch/arm/configs/tegra_defconfig b/arch/arm/configs/tegra_defconfig
index 00fe9e9..27d69b5 100644
--- a/arch/arm/configs/tegra_defconfig
+++ b/arch/arm/configs/tegra_defconfig
@@ -204,7 +204,10 @@ CONFIG_MMC_BLOCK_MINORS=16
 CONFIG_MMC_SDHCI=y
 CONFIG_MMC_SDHCI_PLTFM=y
 CONFIG_MMC_SDHCI_TEGRA=y
+CONFIG_NEW_LEDS=y
+CONFIG_LEDS_CLASS=y
 CONFIG_LEDS_GPIO=y
+CONFIG_LEDS_TRIGGERS=y
 CONFIG_LEDS_TRIGGER_TIMER=y
 CONFIG_LEDS_TRIGGER_ONESHOT=y
 CONFIG_LEDS_TRIGGER_HEARTBEAT=y
diff --git a/arch/arm/include/asm/Kbuild b/arch/arm/include/asm/Kbuild
index 3278afe..23e728e 100644
--- a/arch/arm/include/asm/Kbuild
+++ b/arch/arm/include/asm/Kbuild
@@ -7,16 +7,19 @@ generic-y += current.h
 generic-y += emergency-restart.h
 generic-y += errno.h
 generic-y += exec.h
+generic-y += hash.h
 generic-y += ioctl.h
 generic-y += ipcbuf.h
 generic-y += irq_regs.h
 generic-y += kdebug.h
 generic-y += local.h
 generic-y += local64.h
+generic-y += mcs_spinlock.h
 generic-y += msgbuf.h
 generic-y += param.h
 generic-y += parport.h
 generic-y += poll.h
+generic-y += preempt.h
 generic-y += resource.h
 generic-y += sections.h
 generic-y += segment.h
@@ -33,5 +36,3 @@ generic-y += termios.h
 generic-y += timex.h
 generic-y += trace_clock.h
 generic-y += unaligned.h
-generic-y += preempt.h
-generic-y += hash.h
diff --git a/arch/arm/include/asm/memory.h b/arch/arm/include/asm/memory.h
index 8756e4b..4afb376 100644
--- a/arch/arm/include/asm/memory.h
+++ b/arch/arm/include/asm/memory.h
@@ -30,14 +30,15 @@
  */
 #define UL(x) _AC(x, UL)
 
+/* PAGE_OFFSET - the virtual address of the start of the kernel image */
+#define PAGE_OFFSET		UL(CONFIG_PAGE_OFFSET)
+
 #ifdef CONFIG_MMU
 
 /*
- * PAGE_OFFSET - the virtual address of the start of the kernel image
  * TASK_SIZE - the maximum size of a user space task.
  * TASK_UNMAPPED_BASE - the lower boundary of the mmap VM area
  */
-#define PAGE_OFFSET		UL(CONFIG_PAGE_OFFSET)
 #define TASK_SIZE		(UL(CONFIG_PAGE_OFFSET) - UL(SZ_16M))
 #define TASK_UNMAPPED_BASE	ALIGN(TASK_SIZE / 3, SZ_16M)
 
@@ -104,10 +105,6 @@
 #define END_MEM     		(UL(CONFIG_DRAM_BASE) + CONFIG_DRAM_SIZE)
 #endif
 
-#ifndef PAGE_OFFSET
-#define PAGE_OFFSET		PLAT_PHYS_OFFSET
-#endif
-
 /*
  * The module can be at any place in ram in nommu mode.
  */
diff --git a/arch/arm/include/asm/topology.h b/arch/arm/include/asm/topology.h
index 58b8b84..2fe85ff 100644
--- a/arch/arm/include/asm/topology.h
+++ b/arch/arm/include/asm/topology.h
@@ -20,9 +20,6 @@ extern struct cputopo_arm cpu_topology[NR_CPUS];
 #define topology_core_cpumask(cpu)	(&cpu_topology[cpu].core_sibling)
 #define topology_thread_cpumask(cpu)	(&cpu_topology[cpu].thread_sibling)
 
-#define mc_capable()	(cpu_topology[0].socket_id != -1)
-#define smt_capable()	(cpu_topology[0].thread_id != -1)
-
 void init_cpu_topology(void);
 void store_cpu_topology(unsigned int cpuid);
 const struct cpumask *cpu_coregroup_mask(int cpu);
diff --git a/arch/arm/kernel/head-common.S b/arch/arm/kernel/head-common.S
index 47cd974..c96ecac 100644
--- a/arch/arm/kernel/head-common.S
+++ b/arch/arm/kernel/head-common.S
@@ -177,6 +177,18 @@ __lookup_processor_type_data:
 	.long	__proc_info_end
 	.size	__lookup_processor_type_data, . - __lookup_processor_type_data
 
+__error_lpae:
+#ifdef CONFIG_DEBUG_LL
+	adr	r0, str_lpae
+	bl 	printascii
+	b	__error
+str_lpae: .asciz "\nError: Kernel with LPAE support, but CPU does not support LPAE.\n"
+#else
+	b	__error
+#endif
+	.align
+ENDPROC(__error_lpae)
+
 __error_p:
 #ifdef CONFIG_DEBUG_LL
 	adr	r0, str_p1
diff --git a/arch/arm/kernel/head.S b/arch/arm/kernel/head.S
index 914616e..f5f381d 100644
--- a/arch/arm/kernel/head.S
+++ b/arch/arm/kernel/head.S
@@ -102,7 +102,7 @@ ENTRY(stext)
 	and	r3, r3, #0xf			@ extract VMSA support
 	cmp	r3, #5				@ long-descriptor translation table format?
  THUMB( it	lo )				@ force fixup-able long branch encoding
-	blo	__error_p			@ only classic page table format
+	blo	__error_lpae			@ only classic page table format
 #endif
 
 #ifndef CONFIG_XIP_KERNEL
diff --git a/arch/arm/kernel/process.c b/arch/arm/kernel/process.c
index 92f7b15..adabeab 100644
--- a/arch/arm/kernel/process.c
+++ b/arch/arm/kernel/process.c
@@ -30,7 +30,6 @@
 #include <linux/uaccess.h>
 #include <linux/random.h>
 #include <linux/hw_breakpoint.h>
-#include <linux/cpuidle.h>
 #include <linux/leds.h>
 #include <linux/reboot.h>
 
@@ -133,7 +132,11 @@ EXPORT_SYMBOL_GPL(arm_pm_restart);
 
 void (*arm_pm_idle)(void);
 
-static void default_idle(void)
+/*
+ * Called from the core idle loop.
+ */
+
+void arch_cpu_idle(void)
 {
 	if (arm_pm_idle)
 		arm_pm_idle();
@@ -168,15 +171,6 @@ void arch_cpu_idle_dead(void)
 #endif
 
 /*
- * Called from the core idle loop.
- */
-void arch_cpu_idle(void)
-{
-	if (cpuidle_idle_call())
-		default_idle();
-}
-
-/*
  * Called by kexec, immediately prior to machine_kexec().
  *
  * This must completely disable all secondary CPUs; simply causing those CPUs
diff --git a/arch/arm/kvm/arm.c b/arch/arm/kvm/arm.c
index 1d8248e..bd18bb8 100644
--- a/arch/arm/kvm/arm.c
+++ b/arch/arm/kvm/arm.c
@@ -878,7 +878,8 @@ static int hyp_init_cpu_pm_notifier(struct notifier_block *self,
 				    unsigned long cmd,
 				    void *v)
 {
-	if (cmd == CPU_PM_EXIT) {
+	if (cmd == CPU_PM_EXIT &&
+	    __hyp_get_vectors() == hyp_default_vectors) {
 		cpu_init_hyp_mode(NULL);
 		return NOTIFY_OK;
 	}
diff --git a/arch/arm/kvm/interrupts.S b/arch/arm/kvm/interrupts.S
index ddc1553..0d68d40 100644
--- a/arch/arm/kvm/interrupts.S
+++ b/arch/arm/kvm/interrupts.S
@@ -220,6 +220,10 @@ after_vfp_restore:
  * in Hyp mode (see init_hyp_mode in arch/arm/kvm/arm.c).  Return values are
  * passed in r0 and r1.
  *
+ * A function pointer with a value of 0xffffffff has a special meaning,
+ * and is used to implement __hyp_get_vectors in the same way as in
+ * arch/arm/kernel/hyp_stub.S.
+ *
  * The calling convention follows the standard AAPCS:
  *   r0 - r3: caller save
  *   r12:     caller save
@@ -363,6 +367,11 @@ hyp_hvc:
 host_switch_to_hyp:
 	pop	{r0, r1, r2}
 
+	/* Check for __hyp_get_vectors */
+	cmp	r0, #-1
+	mrceq	p15, 4, r0, c12, c0, 0	@ get HVBAR
+	beq	1f
+
 	push	{lr}
 	mrs	lr, SPSR
 	push	{lr}
@@ -378,7 +387,7 @@ THUMB(	orr	lr, #1)
 	pop	{lr}
 	msr	SPSR_csxf, lr
 	pop	{lr}
-	eret
+1:	eret
 
 guest_trap:
 	load_vcpu			@ Load VCPU pointer to r0
diff --git a/arch/arm/mach-davinci/da850.c b/arch/arm/mach-davinci/da850.c
index 2ab0043..85399c9 100644
--- a/arch/arm/mach-davinci/da850.c
+++ b/arch/arm/mach-davinci/da850.c
@@ -472,7 +472,7 @@ static struct clk_lookup da850_clks[] = {
 	CLK("spi_davinci.0",	NULL,		&spi0_clk),
 	CLK("spi_davinci.1",	NULL,		&spi1_clk),
 	CLK("vpif",		NULL,		&vpif_clk),
-	CLK("ahci",		NULL,		&sata_clk),
+	CLK("ahci_da850",		NULL,		&sata_clk),
 	CLK("davinci-rproc.0",	NULL,		&dsp_clk),
 	CLK("ehrpwm",		"fck",		&ehrpwm_clk),
 	CLK("ehrpwm",		"tbclk",	&ehrpwm_tbclk),
diff --git a/arch/arm/mach-davinci/devices-da8xx.c b/arch/arm/mach-davinci/devices-da8xx.c
index 0486cdf..56ea41d 100644
--- a/arch/arm/mach-davinci/devices-da8xx.c
+++ b/arch/arm/mach-davinci/devices-da8xx.c
@@ -1020,7 +1020,6 @@ int __init da8xx_register_spi_bus(int instance, unsigned num_chipselect)
 }
 
 #ifdef CONFIG_ARCH_DAVINCI_DA850
-
 static struct resource da850_sata_resources[] = {
 	{
 		.start	= DA850_SATA_BASE,
@@ -1028,103 +1027,22 @@ static struct resource da850_sata_resources[] = {
 		.flags	= IORESOURCE_MEM,
 	},
 	{
+		.start	= DA8XX_SYSCFG1_BASE + DA8XX_PWRDN_REG,
+		.end	= DA8XX_SYSCFG1_BASE + DA8XX_PWRDN_REG + 0x3,
+		.flags	= IORESOURCE_MEM,
+	},
+	{
 		.start	= IRQ_DA850_SATAINT,
 		.flags	= IORESOURCE_IRQ,
 	},
 };
 
-/* SATA PHY Control Register offset from AHCI base */
-#define SATA_P0PHYCR_REG	0x178
-
-#define SATA_PHY_MPY(x)		((x) << 0)
-#define SATA_PHY_LOS(x)		((x) << 6)
-#define SATA_PHY_RXCDR(x)	((x) << 10)
-#define SATA_PHY_RXEQ(x)	((x) << 13)
-#define SATA_PHY_TXSWING(x)	((x) << 19)
-#define SATA_PHY_ENPLL(x)	((x) << 31)
-
-static struct clk *da850_sata_clk;
-static unsigned long da850_sata_refclkpn;
-
-/* Supported DA850 SATA crystal frequencies */
-#define KHZ_TO_HZ(freq) ((freq) * 1000)
-static unsigned long da850_sata_xtal[] = {
-	KHZ_TO_HZ(300000),
-	KHZ_TO_HZ(250000),
-	0,			/* Reserved */
-	KHZ_TO_HZ(187500),
-	KHZ_TO_HZ(150000),
-	KHZ_TO_HZ(125000),
-	KHZ_TO_HZ(120000),
-	KHZ_TO_HZ(100000),
-	KHZ_TO_HZ(75000),
-	KHZ_TO_HZ(60000),
-};
-
-static int da850_sata_init(struct device *dev, void __iomem *addr)
-{
-	int i, ret;
-	unsigned int val;
-
-	da850_sata_clk = clk_get(dev, NULL);
-	if (IS_ERR(da850_sata_clk))
-		return PTR_ERR(da850_sata_clk);
-
-	ret = clk_prepare_enable(da850_sata_clk);
-	if (ret)
-		goto err0;
-
-	/* Enable SATA clock receiver */
-	val = __raw_readl(DA8XX_SYSCFG1_VIRT(DA8XX_PWRDN_REG));
-	val &= ~BIT(0);
-	__raw_writel(val, DA8XX_SYSCFG1_VIRT(DA8XX_PWRDN_REG));
-
-	/* Get the multiplier needed for 1.5GHz PLL output */
-	for (i = 0; i < ARRAY_SIZE(da850_sata_xtal); i++)
-		if (da850_sata_xtal[i] == da850_sata_refclkpn)
-			break;
-
-	if (i == ARRAY_SIZE(da850_sata_xtal)) {
-		ret = -EINVAL;
-		goto err1;
-	}
-
-	val = SATA_PHY_MPY(i + 1) |
-		SATA_PHY_LOS(1) |
-		SATA_PHY_RXCDR(4) |
-		SATA_PHY_RXEQ(1) |
-		SATA_PHY_TXSWING(3) |
-		SATA_PHY_ENPLL(1);
-
-	__raw_writel(val, addr + SATA_P0PHYCR_REG);
-
-	return 0;
-
-err1:
-	clk_disable_unprepare(da850_sata_clk);
-err0:
-	clk_put(da850_sata_clk);
-	return ret;
-}
-
-static void da850_sata_exit(struct device *dev)
-{
-	clk_disable_unprepare(da850_sata_clk);
-	clk_put(da850_sata_clk);
-}
-
-static struct ahci_platform_data da850_sata_pdata = {
-	.init	= da850_sata_init,
-	.exit	= da850_sata_exit,
-};
-
 static u64 da850_sata_dmamask = DMA_BIT_MASK(32);
 
 static struct platform_device da850_sata_device = {
-	.name	= "ahci",
+	.name	= "ahci_da850",
 	.id	= -1,
 	.dev	= {
-		.platform_data		= &da850_sata_pdata,
 		.dma_mask		= &da850_sata_dmamask,
 		.coherent_dma_mask	= DMA_BIT_MASK(32),
 	},
@@ -1134,9 +1052,8 @@ static struct platform_device da850_sata_device = {
 
 int __init da850_register_sata(unsigned long refclkpn)
 {
-	da850_sata_refclkpn = refclkpn;
-	if (!da850_sata_refclkpn)
-		return -EINVAL;
+	/* please see comment in drivers/ata/ahci_da850.c */
+	BUG_ON(refclkpn != 100 * 1000 * 1000);
 
 	return platform_device_register(&da850_sata_device);
 }
diff --git a/arch/arm/mach-imx/pm-imx6q.c b/arch/arm/mach-imx/pm-imx6q.c
index 7a9b985..29e3fe6 100644
--- a/arch/arm/mach-imx/pm-imx6q.c
+++ b/arch/arm/mach-imx/pm-imx6q.c
@@ -120,7 +120,7 @@ static void imx6q_enable_wb(bool enable)
 
 int imx6q_set_lpm(enum mxc_cpu_pwr_mode mode)
 {
-	struct irq_desc *iomuxc_irq_desc;
+	struct irq_data *iomuxc_irq_data = irq_get_irq_data(32);
 	u32 val = readl_relaxed(ccm_base + CLPCR);
 
 	val &= ~BM_CLPCR_LPM;
@@ -167,10 +167,9 @@ int imx6q_set_lpm(enum mxc_cpu_pwr_mode mode)
 	 * 3) Software should mask IRQ #32 right after CCM Low-Power mode
 	 *    is set (set bits 0-1 of CCM_CLPCR).
 	 */
-	iomuxc_irq_desc = irq_to_desc(32);
-	imx_gpc_irq_unmask(&iomuxc_irq_desc->irq_data);
+	imx_gpc_irq_unmask(iomuxc_irq_data);
 	writel_relaxed(val, ccm_base + CLPCR);
-	imx_gpc_irq_mask(&iomuxc_irq_desc->irq_data);
+	imx_gpc_irq_mask(iomuxc_irq_data);
 
 	return 0;
 }
diff --git a/arch/arm/mach-mmp/pm-mmp2.c b/arch/arm/mach-mmp/pm-mmp2.c
index 461a191..43b1a51 100644
--- a/arch/arm/mach-mmp/pm-mmp2.c
+++ b/arch/arm/mach-mmp/pm-mmp2.c
@@ -27,22 +27,8 @@
 
 int mmp2_set_wake(struct irq_data *d, unsigned int on)
 {
-	int irq = d->irq;
-	struct irq_desc *desc = irq_to_desc(irq);
 	unsigned long data = 0;
-
-	if (unlikely(irq >= nr_irqs)) {
-		pr_err("IRQ nubmers are out of boundary!\n");
-		return -EINVAL;
-	}
-
-	if (on) {
-		if (desc->action)
-			desc->action->flags |= IRQF_NO_SUSPEND;
-	} else {
-		if (desc->action)
-			desc->action->flags &= ~IRQF_NO_SUSPEND;
-	}
+	int irq = d->irq;
 
 	/* enable wakeup sources */
 	switch (irq) {
diff --git a/arch/arm/mach-mmp/pm-pxa910.c b/arch/arm/mach-mmp/pm-pxa910.c
index 48981ca..04c9daf 100644
--- a/arch/arm/mach-mmp/pm-pxa910.c
+++ b/arch/arm/mach-mmp/pm-pxa910.c
@@ -27,22 +27,8 @@
 
 int pxa910_set_wake(struct irq_data *data, unsigned int on)
 {
-	int irq = data->irq;
-	struct irq_desc *desc = irq_to_desc(data->irq);
 	uint32_t awucrm = 0, apcr = 0;
-
-	if (unlikely(irq >= nr_irqs)) {
-		pr_err("IRQ nubmers are out of boundary!\n");
-		return -EINVAL;
-	}
-
-	if (on) {
-		if (desc->action)
-			desc->action->flags |= IRQF_NO_SUSPEND;
-	} else {
-		if (desc->action)
-			desc->action->flags &= ~IRQF_NO_SUSPEND;
-	}
+	int irq = data->irq;
 
 	/* setting wakeup sources */
 	switch (irq) {
@@ -115,9 +101,11 @@ int pxa910_set_wake(struct irq_data *data, unsigned int on)
 		if (irq >= IRQ_GPIO_START && irq < IRQ_BOARD_START) {
 			awucrm = MPMU_AWUCRM_WAKEUP(2);
 			apcr |= MPMU_APCR_SLPWP2;
-		} else
+		} else {
+			/* FIXME: This should return a proper error code ! */
 			printk(KERN_ERR "Error: no defined wake up source irq: %d\n",
 				irq);
+		}
 	}
 
 	if (on) {
diff --git a/arch/arm/mach-omap1/ams-delta-fiq.c b/arch/arm/mach-omap1/ams-delta-fiq.c
index f12a12a..d1f1209 100644
--- a/arch/arm/mach-omap1/ams-delta-fiq.c
+++ b/arch/arm/mach-omap1/ams-delta-fiq.c
@@ -44,13 +44,10 @@ static unsigned int irq_counter[16];
 
 static irqreturn_t deferred_fiq(int irq, void *dev_id)
 {
-	struct irq_desc *irq_desc;
-	struct irq_chip *irq_chip = NULL;
 	int gpio, irq_num, fiq_count;
+	struct irq_chip *irq_chip;
 
-	irq_desc = irq_to_desc(gpio_to_irq(AMS_DELTA_GPIO_PIN_KEYBRD_CLK));
-	if (irq_desc)
-		irq_chip = irq_desc->irq_data.chip;
+	irq_chip = irq_get_chip(gpio_to_irq(AMS_DELTA_GPIO_PIN_KEYBRD_CLK));
 
 	/*
 	 * For each handled GPIO interrupt, keep calling its interrupt handler
diff --git a/arch/arm/mach-omap2/cclock3xxx_data.c b/arch/arm/mach-omap2/cclock3xxx_data.c
index 3b05aea..11ed915 100644
--- a/arch/arm/mach-omap2/cclock3xxx_data.c
+++ b/arch/arm/mach-omap2/cclock3xxx_data.c
@@ -433,7 +433,9 @@ static const struct clk_ops dpll4_m5x2_ck_ops = {
 	.enable		= &omap2_dflt_clk_enable,
 	.disable	= &omap2_dflt_clk_disable,
 	.is_enabled	= &omap2_dflt_clk_is_enabled,
+	.set_rate	= &omap3_clkoutx2_set_rate,
 	.recalc_rate	= &omap3_clkoutx2_recalc,
+	.round_rate	= &omap3_clkoutx2_round_rate,
 };
 
 static const struct clk_ops dpll4_m5x2_ck_3630_ops = {
diff --git a/arch/arm/mach-omap2/cpuidle44xx.c b/arch/arm/mach-omap2/cpuidle44xx.c
index 4c158c8..01fc710 100644
--- a/arch/arm/mach-omap2/cpuidle44xx.c
+++ b/arch/arm/mach-omap2/cpuidle44xx.c
@@ -23,6 +23,8 @@
 #include "prm.h"
 #include "clockdomain.h"
 
+#define MAX_CPUS	2
+
 /* Machine specific information */
 struct idle_statedata {
 	u32 cpu_state;
@@ -48,11 +50,11 @@ static struct idle_statedata omap4_idle_data[] = {
 	},
 };
 
-static struct powerdomain *mpu_pd, *cpu_pd[NR_CPUS];
-static struct clockdomain *cpu_clkdm[NR_CPUS];
+static struct powerdomain *mpu_pd, *cpu_pd[MAX_CPUS];
+static struct clockdomain *cpu_clkdm[MAX_CPUS];
 
 static atomic_t abort_barrier;
-static bool cpu_done[NR_CPUS];
+static bool cpu_done[MAX_CPUS];
 static struct idle_statedata *state_ptr = &omap4_idle_data[0];
 
 /* Private functions */
diff --git a/arch/arm/mach-omap2/dpll3xxx.c b/arch/arm/mach-omap2/dpll3xxx.c
index 3185ced..3c418ea 100644
--- a/arch/arm/mach-omap2/dpll3xxx.c
+++ b/arch/arm/mach-omap2/dpll3xxx.c
@@ -623,6 +623,32 @@ void omap3_dpll_deny_idle(struct clk_hw_omap *clk)
 
 /* Clock control for DPLL outputs */
 
+/* Find the parent DPLL for the given clkoutx2 clock */
+static struct clk_hw_omap *omap3_find_clkoutx2_dpll(struct clk_hw *hw)
+{
+	struct clk_hw_omap *pclk = NULL;
+	struct clk *parent;
+
+	/* Walk up the parents of clk, looking for a DPLL */
+	do {
+		do {
+			parent = __clk_get_parent(hw->clk);
+			hw = __clk_get_hw(parent);
+		} while (hw && (__clk_get_flags(hw->clk) & CLK_IS_BASIC));
+		if (!hw)
+			break;
+		pclk = to_clk_hw_omap(hw);
+	} while (pclk && !pclk->dpll_data);
+
+	/* clk does not have a DPLL as a parent?  error in the clock data */
+	if (!pclk) {
+		WARN_ON(1);
+		return NULL;
+	}
+
+	return pclk;
+}
+
 /**
  * omap3_clkoutx2_recalc - recalculate DPLL X2 output virtual clock rate
  * @clk: DPLL output struct clk
@@ -637,27 +663,14 @@ unsigned long omap3_clkoutx2_recalc(struct clk_hw *hw,
 	unsigned long rate;
 	u32 v;
 	struct clk_hw_omap *pclk = NULL;
-	struct clk *parent;
 
 	if (!parent_rate)
 		return 0;
 
-	/* Walk up the parents of clk, looking for a DPLL */
-	do {
-		do {
-			parent = __clk_get_parent(hw->clk);
-			hw = __clk_get_hw(parent);
-		} while (hw && (__clk_get_flags(hw->clk) & CLK_IS_BASIC));
-		if (!hw)
-			break;
-		pclk = to_clk_hw_omap(hw);
-	} while (pclk && !pclk->dpll_data);
+	pclk = omap3_find_clkoutx2_dpll(hw);
 
-	/* clk does not have a DPLL as a parent?  error in the clock data */
-	if (!pclk) {
-		WARN_ON(1);
+	if (!pclk)
 		return 0;
-	}
 
 	dd = pclk->dpll_data;
 
@@ -672,6 +685,55 @@ unsigned long omap3_clkoutx2_recalc(struct clk_hw *hw,
 	return rate;
 }
 
+int omap3_clkoutx2_set_rate(struct clk_hw *hw, unsigned long rate,
+					unsigned long parent_rate)
+{
+	return 0;
+}
+
+long omap3_clkoutx2_round_rate(struct clk_hw *hw, unsigned long rate,
+		unsigned long *prate)
+{
+	const struct dpll_data *dd;
+	u32 v;
+	struct clk_hw_omap *pclk = NULL;
+
+	if (!*prate)
+		return 0;
+
+	pclk = omap3_find_clkoutx2_dpll(hw);
+
+	if (!pclk)
+		return 0;
+
+	dd = pclk->dpll_data;
+
+	/* TYPE J does not have a clkoutx2 */
+	if (dd->flags & DPLL_J_TYPE) {
+		*prate = __clk_round_rate(__clk_get_parent(pclk->hw.clk), rate);
+		return *prate;
+	}
+
+	WARN_ON(!dd->enable_mask);
+
+	v = omap2_clk_readl(pclk, dd->control_reg) & dd->enable_mask;
+	v >>= __ffs(dd->enable_mask);
+
+	/* If in bypass, the rate is fixed to the bypass rate*/
+	if (v != OMAP3XXX_EN_DPLL_LOCKED)
+		return *prate;
+
+	if (__clk_get_flags(hw->clk) & CLK_SET_RATE_PARENT) {
+		unsigned long best_parent;
+
+		best_parent = (rate / 2);
+		*prate = __clk_round_rate(__clk_get_parent(hw->clk),
+				best_parent);
+	}
+
+	return *prate * 2;
+}
+
 /* OMAP3/4 non-CORE DPLL clkops */
 const struct clk_hw_omap_ops clkhwops_omap3_dpll = {
 	.allow_idle	= omap3_dpll_allow_idle,
diff --git a/arch/arm/mach-omap2/omap_hwmod.c b/arch/arm/mach-omap2/omap_hwmod.c
index 42d8188..1f33f5d 100644
--- a/arch/arm/mach-omap2/omap_hwmod.c
+++ b/arch/arm/mach-omap2/omap_hwmod.c
@@ -1947,29 +1947,31 @@ static int _ocp_softreset(struct omap_hwmod *oh)
 		goto dis_opt_clks;
 
 	_write_sysconfig(v, oh);
-	ret = _clear_softreset(oh, &v);
-	if (ret)
-		goto dis_opt_clks;
-
-	_write_sysconfig(v, oh);
 
 	if (oh->class->sysc->srst_udelay)
 		udelay(oh->class->sysc->srst_udelay);
 
 	c = _wait_softreset_complete(oh);
-	if (c == MAX_MODULE_SOFTRESET_WAIT)
+	if (c == MAX_MODULE_SOFTRESET_WAIT) {
 		pr_warning("omap_hwmod: %s: softreset failed (waited %d usec)\n",
 			   oh->name, MAX_MODULE_SOFTRESET_WAIT);
-	else
+		ret = -ETIMEDOUT;
+		goto dis_opt_clks;
+	} else {
 		pr_debug("omap_hwmod: %s: softreset in %d usec\n", oh->name, c);
+	}
+
+	ret = _clear_softreset(oh, &v);
+	if (ret)
+		goto dis_opt_clks;
+
+	_write_sysconfig(v, oh);
 
 	/*
 	 * XXX add _HWMOD_STATE_WEDGED for modules that don't come back from
 	 * _wait_target_ready() or _reset()
 	 */
 
-	ret = (c == MAX_MODULE_SOFTRESET_WAIT) ? -ETIMEDOUT : 0;
-
 dis_opt_clks:
 	if (oh->flags & HWMOD_CONTROL_OPT_CLKS_IN_RESET)
 		_disable_optional_clocks(oh);
diff --git a/arch/arm/mach-omap2/omap_hwmod_7xx_data.c b/arch/arm/mach-omap2/omap_hwmod_7xx_data.c
index 18f333c..810c205 100644
--- a/arch/arm/mach-omap2/omap_hwmod_7xx_data.c
+++ b/arch/arm/mach-omap2/omap_hwmod_7xx_data.c
@@ -1365,11 +1365,10 @@ static struct omap_hwmod_class_sysconfig dra7xx_spinlock_sysc = {
 	.rev_offs	= 0x0000,
 	.sysc_offs	= 0x0010,
 	.syss_offs	= 0x0014,
-	.sysc_flags	= (SYSC_HAS_AUTOIDLE | SYSC_HAS_CLOCKACTIVITY |
-			   SYSC_HAS_ENAWAKEUP | SYSC_HAS_SIDLEMODE |
-			   SYSC_HAS_SOFTRESET | SYSS_HAS_RESET_STATUS),
-	.idlemodes	= (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART |
-			   SIDLE_SMART_WKUP),
+	.sysc_flags	= (SYSC_HAS_AUTOIDLE | SYSC_HAS_ENAWAKEUP |
+			   SYSC_HAS_SIDLEMODE | SYSC_HAS_SOFTRESET |
+			   SYSS_HAS_RESET_STATUS),
+	.idlemodes	= (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART),
 	.sysc_fields	= &omap_hwmod_sysc_type1,
 };
 
diff --git a/arch/arm/mach-omap2/pdata-quirks.c b/arch/arm/mach-omap2/pdata-quirks.c
index 3d5b24d..c33e07e 100644
--- a/arch/arm/mach-omap2/pdata-quirks.c
+++ b/arch/arm/mach-omap2/pdata-quirks.c
@@ -22,6 +22,8 @@
 #include "common-board-devices.h"
 #include "dss-common.h"
 #include "control.h"
+#include "omap-secure.h"
+#include "soc.h"
 
 struct pdata_init {
 	const char *compatible;
@@ -169,6 +171,22 @@ static void __init am3517_evm_legacy_init(void)
 	omap_ctrl_writel(v, AM35XX_CONTROL_IP_SW_RESET);
 	omap_ctrl_readl(AM35XX_CONTROL_IP_SW_RESET); /* OCP barrier */
 }
+
+static void __init nokia_n900_legacy_init(void)
+{
+	hsmmc2_internal_input_clk();
+
+	if (omap_type() == OMAP2_DEVICE_TYPE_SEC) {
+		if (IS_ENABLED(CONFIG_ARM_ERRATA_430973)) {
+			pr_info("RX-51: Enabling ARM errata 430973 workaround\n");
+			/* set IBE to 1 */
+			rx51_secure_update_aux_cr(BIT(6), 0);
+		} else {
+			pr_warning("RX-51: Not enabling ARM errata 430973 workaround\n");
+			pr_warning("Thumb binaries may crash randomly without this workaround\n");
+		}
+	}
+}
 #endif /* CONFIG_ARCH_OMAP3 */
 
 #ifdef CONFIG_ARCH_OMAP4
@@ -239,6 +257,7 @@ struct of_dev_auxdata omap_auxdata_lookup[] __initdata = {
 #endif
 #ifdef CONFIG_ARCH_OMAP3
 	OF_DEV_AUXDATA("ti,omap3-padconf", 0x48002030, "48002030.pinmux", &pcs_pdata),
+	OF_DEV_AUXDATA("ti,omap3-padconf", 0x480025a0, "480025a0.pinmux", &pcs_pdata),
 	OF_DEV_AUXDATA("ti,omap3-padconf", 0x48002a00, "48002a00.pinmux", &pcs_pdata),
 	/* Only on am3517 */
 	OF_DEV_AUXDATA("ti,davinci_mdio", 0x5c030000, "davinci_mdio.0", NULL),
@@ -259,7 +278,7 @@ struct of_dev_auxdata omap_auxdata_lookup[] __initdata = {
 static struct pdata_init pdata_quirks[] __initdata = {
 #ifdef CONFIG_ARCH_OMAP3
 	{ "compulab,omap3-sbc-t3730", omap3_sbc_t3730_legacy_init, },
-	{ "nokia,omap3-n900", hsmmc2_internal_input_clk, },
+	{ "nokia,omap3-n900", nokia_n900_legacy_init, },
 	{ "nokia,omap3-n9", hsmmc2_internal_input_clk, },
 	{ "nokia,omap3-n950", hsmmc2_internal_input_clk, },
 	{ "isee,omap3-igep0020", omap3_igep0020_legacy_init, },
diff --git a/arch/arm/mach-omap2/prminst44xx.c b/arch/arm/mach-omap2/prminst44xx.c
index 6334b96..280f3c5 100644
--- a/arch/arm/mach-omap2/prminst44xx.c
+++ b/arch/arm/mach-omap2/prminst44xx.c
@@ -183,11 +183,11 @@ void omap4_prminst_global_warm_sw_reset(void)
 					OMAP4_PRM_RSTCTRL_OFFSET);
 	v |= OMAP4430_RST_GLOBAL_WARM_SW_MASK;
 	omap4_prminst_write_inst_reg(v, OMAP4430_PRM_PARTITION,
-				 OMAP4430_PRM_DEVICE_INST,
+				 dev_inst,
 				 OMAP4_PRM_RSTCTRL_OFFSET);
 
 	/* OCP barrier */
 	v = omap4_prminst_read_inst_reg(OMAP4430_PRM_PARTITION,
-				    OMAP4430_PRM_DEVICE_INST,
+				    dev_inst,
 				    OMAP4_PRM_RSTCTRL_OFFSET);
 }
diff --git a/arch/arm/mach-sa1100/include/mach/collie.h b/arch/arm/mach-sa1100/include/mach/collie.h
index f33679d..50e1d85 100644
--- a/arch/arm/mach-sa1100/include/mach/collie.h
+++ b/arch/arm/mach-sa1100/include/mach/collie.h
@@ -13,6 +13,8 @@
 #ifndef __ASM_ARCH_COLLIE_H
 #define __ASM_ARCH_COLLIE_H
 
+#include "hardware.h" /* Gives GPIO_MAX */
+
 extern void locomolcd_power(int on);
 
 #define COLLIE_SCOOP_GPIO_BASE	(GPIO_MAX + 1)
diff --git a/arch/arm/mach-shmobile/Kconfig b/arch/arm/mach-shmobile/Kconfig
index 05fa505..f6db7dc 100644
--- a/arch/arm/mach-shmobile/Kconfig
+++ b/arch/arm/mach-shmobile/Kconfig
@@ -24,17 +24,21 @@ comment "Renesas ARM SoCs System Type"
 
 config ARCH_EMEV2
 	bool "Emma Mobile EV2"
+	select SYS_SUPPORTS_EM_STI
 
 config ARCH_R7S72100
 	bool "RZ/A1H (R7S72100)"
+	select SYS_SUPPORTS_SH_MTU2
 
 config ARCH_R8A7790
 	bool "R-Car H2 (R8A77900)"
 	select RENESAS_IRQC
+	select SYS_SUPPORTS_SH_CMT
 
 config ARCH_R8A7791
 	bool "R-Car M2 (R8A77910)"
 	select RENESAS_IRQC
+	select SYS_SUPPORTS_SH_CMT
 
 comment "Renesas ARM SoCs Board Type"
 
@@ -68,6 +72,8 @@ config ARCH_SH7372
 	select ARM_CPU_SUSPEND if PM || CPU_IDLE
 	select CPU_V7
 	select SH_CLK_CPG
+	select SYS_SUPPORTS_SH_CMT
+	select SYS_SUPPORTS_SH_TMU
 
 config ARCH_SH73A0
 	bool "SH-Mobile AG5 (R8A73A00)"
@@ -77,6 +83,8 @@ config ARCH_SH73A0
 	select I2C
 	select SH_CLK_CPG
 	select RENESAS_INTC_IRQPIN
+	select SYS_SUPPORTS_SH_CMT
+	select SYS_SUPPORTS_SH_TMU
 
 config ARCH_R8A73A4
 	bool "R-Mobile APE6 (R8A73A40)"
@@ -87,6 +95,8 @@ config ARCH_R8A73A4
 	select RENESAS_IRQC
 	select ARCH_HAS_CPUFREQ
 	select ARCH_HAS_OPP
+	select SYS_SUPPORTS_SH_CMT
+	select SYS_SUPPORTS_SH_TMU
 
 config ARCH_R8A7740
 	bool "R-Mobile A1 (R8A77400)"
@@ -95,6 +105,8 @@ config ARCH_R8A7740
 	select CPU_V7
 	select SH_CLK_CPG
 	select RENESAS_INTC_IRQPIN
+	select SYS_SUPPORTS_SH_CMT
+	select SYS_SUPPORTS_SH_TMU
 
 config ARCH_R8A7778
 	bool "R-Car M1A (R8A77781)"
@@ -104,6 +116,7 @@ config ARCH_R8A7778
 	select ARM_GIC
 	select USB_ARCH_HAS_EHCI
 	select USB_ARCH_HAS_OHCI
+	select SYS_SUPPORTS_SH_TMU
 
 config ARCH_R8A7779
 	bool "R-Car H1 (R8A77790)"
@@ -114,6 +127,7 @@ config ARCH_R8A7779
 	select USB_ARCH_HAS_EHCI
 	select USB_ARCH_HAS_OHCI
 	select RENESAS_INTC_IRQPIN
+	select SYS_SUPPORTS_SH_TMU
 
 config ARCH_R8A7790
 	bool "R-Car H2 (R8A77900)"
@@ -123,6 +137,7 @@ config ARCH_R8A7790
 	select MIGHT_HAVE_PCI
 	select SH_CLK_CPG
 	select RENESAS_IRQC
+	select SYS_SUPPORTS_SH_CMT
 
 config ARCH_R8A7791
 	bool "R-Car M2 (R8A77910)"
@@ -132,6 +147,7 @@ config ARCH_R8A7791
 	select MIGHT_HAVE_PCI
 	select SH_CLK_CPG
 	select RENESAS_IRQC
+	select SYS_SUPPORTS_SH_CMT
 
 config ARCH_EMEV2
 	bool "Emma Mobile EV2"
@@ -141,6 +157,7 @@ config ARCH_EMEV2
 	select MIGHT_HAVE_PCI
 	select USE_OF
 	select AUTO_ZRELADDR
+	select SYS_SUPPORTS_EM_STI
 
 config ARCH_R7S72100
 	bool "RZ/A1H (R7S72100)"
@@ -148,6 +165,7 @@ config ARCH_R7S72100
 	select ARM_GIC
 	select CPU_V7
 	select SH_CLK_CPG
+	select SYS_SUPPORTS_SH_MTU2
 
 comment "Renesas ARM SoCs Board Type"
 
@@ -321,24 +339,6 @@ config SHMOBILE_TIMER_HZ
 	  want to select a HZ value such as 128 that can evenly divide RCLK.
 	  A HZ value that does not divide evenly may cause timer drift.
 
-config SH_TIMER_CMT
-	bool "CMT timer driver"
-	default y
-	help
-	  This enables build of the CMT timer driver.
-
-config SH_TIMER_TMU
-	bool "TMU timer driver"
-	default y
-	help
-	  This enables build of the TMU timer driver.
-
-config EM_TIMER_STI
-	bool "STI timer driver"
-	default y
-	help
-	  This enables build of the STI timer driver.
-
 endmenu
 
 endif
diff --git a/arch/arm/mach-u300/Makefile b/arch/arm/mach-u300/Makefile
index 0f362b6..3ec74ac 100644
--- a/arch/arm/mach-u300/Makefile
+++ b/arch/arm/mach-u300/Makefile
@@ -2,7 +2,7 @@
 # Makefile for the linux kernel, U300 machine.
 #
 
-obj-y		:= core.o timer.o
+obj-y		:= core.o
 obj-m		:=
 obj-n		:=
 obj-		:=
diff --git a/arch/arm/mach-u300/timer.c b/arch/arm/mach-u300/timer.c
deleted file mode 100644
index fe08fd3..0000000
--- a/arch/arm/mach-u300/timer.c
+++ /dev/null
@@ -1,451 +0,0 @@
-/*
- *
- * arch/arm/mach-u300/timer.c
- *
- *
- * Copyright (C) 2007-2009 ST-Ericsson AB
- * License terms: GNU General Public License (GPL) version 2
- * Timer COH 901 328, runs the OS timer interrupt.
- * Author: Linus Walleij <linus.walleij@stericsson.com>
- */
-#include <linux/interrupt.h>
-#include <linux/time.h>
-#include <linux/timex.h>
-#include <linux/clockchips.h>
-#include <linux/clocksource.h>
-#include <linux/types.h>
-#include <linux/io.h>
-#include <linux/clk.h>
-#include <linux/err.h>
-#include <linux/irq.h>
-#include <linux/delay.h>
-#include <linux/of_address.h>
-#include <linux/of_irq.h>
-#include <linux/sched_clock.h>
-
-/* Generic stuff */
-#include <asm/mach/map.h>
-#include <asm/mach/time.h>
-
-/*
- * APP side special timer registers
- * This timer contains four timers which can fire an interrupt each.
- * OS (operating system) timer @ 32768 Hz
- * DD (device driver) timer @ 1 kHz
- * GP1 (general purpose 1) timer @ 1MHz
- * GP2 (general purpose 2) timer @ 1MHz
- */
-
-/* Reset OS Timer 32bit (-/W) */
-#define U300_TIMER_APP_ROST					(0x0000)
-#define U300_TIMER_APP_ROST_TIMER_RESET				(0x00000000)
-/* Enable OS Timer 32bit (-/W) */
-#define U300_TIMER_APP_EOST					(0x0004)
-#define U300_TIMER_APP_EOST_TIMER_ENABLE			(0x00000000)
-/* Disable OS Timer 32bit (-/W) */
-#define U300_TIMER_APP_DOST					(0x0008)
-#define U300_TIMER_APP_DOST_TIMER_DISABLE			(0x00000000)
-/* OS Timer Mode Register 32bit (-/W) */
-#define U300_TIMER_APP_SOSTM					(0x000c)
-#define U300_TIMER_APP_SOSTM_MODE_CONTINUOUS			(0x00000000)
-#define U300_TIMER_APP_SOSTM_MODE_ONE_SHOT			(0x00000001)
-/* OS Timer Status Register 32bit (R/-) */
-#define U300_TIMER_APP_OSTS					(0x0010)
-#define U300_TIMER_APP_OSTS_TIMER_STATE_MASK			(0x0000000F)
-#define U300_TIMER_APP_OSTS_TIMER_STATE_IDLE			(0x00000001)
-#define U300_TIMER_APP_OSTS_TIMER_STATE_ACTIVE			(0x00000002)
-#define U300_TIMER_APP_OSTS_ENABLE_IND				(0x00000010)
-#define U300_TIMER_APP_OSTS_MODE_MASK				(0x00000020)
-#define U300_TIMER_APP_OSTS_MODE_CONTINUOUS			(0x00000000)
-#define U300_TIMER_APP_OSTS_MODE_ONE_SHOT			(0x00000020)
-#define U300_TIMER_APP_OSTS_IRQ_ENABLED_IND			(0x00000040)
-#define U300_TIMER_APP_OSTS_IRQ_PENDING_IND			(0x00000080)
-/* OS Timer Current Count Register 32bit (R/-) */
-#define U300_TIMER_APP_OSTCC					(0x0014)
-/* OS Timer Terminal Count Register 32bit (R/W) */
-#define U300_TIMER_APP_OSTTC					(0x0018)
-/* OS Timer Interrupt Enable Register 32bit (-/W) */
-#define U300_TIMER_APP_OSTIE					(0x001c)
-#define U300_TIMER_APP_OSTIE_IRQ_DISABLE			(0x00000000)
-#define U300_TIMER_APP_OSTIE_IRQ_ENABLE				(0x00000001)
-/* OS Timer Interrupt Acknowledge Register 32bit (-/W) */
-#define U300_TIMER_APP_OSTIA					(0x0020)
-#define U300_TIMER_APP_OSTIA_IRQ_ACK				(0x00000080)
-
-/* Reset DD Timer 32bit (-/W) */
-#define U300_TIMER_APP_RDDT					(0x0040)
-#define U300_TIMER_APP_RDDT_TIMER_RESET				(0x00000000)
-/* Enable DD Timer 32bit (-/W) */
-#define U300_TIMER_APP_EDDT					(0x0044)
-#define U300_TIMER_APP_EDDT_TIMER_ENABLE			(0x00000000)
-/* Disable DD Timer 32bit (-/W) */
-#define U300_TIMER_APP_DDDT					(0x0048)
-#define U300_TIMER_APP_DDDT_TIMER_DISABLE			(0x00000000)
-/* DD Timer Mode Register 32bit (-/W) */
-#define U300_TIMER_APP_SDDTM					(0x004c)
-#define U300_TIMER_APP_SDDTM_MODE_CONTINUOUS			(0x00000000)
-#define U300_TIMER_APP_SDDTM_MODE_ONE_SHOT			(0x00000001)
-/* DD Timer Status Register 32bit (R/-) */
-#define U300_TIMER_APP_DDTS					(0x0050)
-#define U300_TIMER_APP_DDTS_TIMER_STATE_MASK			(0x0000000F)
-#define U300_TIMER_APP_DDTS_TIMER_STATE_IDLE			(0x00000001)
-#define U300_TIMER_APP_DDTS_TIMER_STATE_ACTIVE			(0x00000002)
-#define U300_TIMER_APP_DDTS_ENABLE_IND				(0x00000010)
-#define U300_TIMER_APP_DDTS_MODE_MASK				(0x00000020)
-#define U300_TIMER_APP_DDTS_MODE_CONTINUOUS			(0x00000000)
-#define U300_TIMER_APP_DDTS_MODE_ONE_SHOT			(0x00000020)
-#define U300_TIMER_APP_DDTS_IRQ_ENABLED_IND			(0x00000040)
-#define U300_TIMER_APP_DDTS_IRQ_PENDING_IND			(0x00000080)
-/* DD Timer Current Count Register 32bit (R/-) */
-#define U300_TIMER_APP_DDTCC					(0x0054)
-/* DD Timer Terminal Count Register 32bit (R/W) */
-#define U300_TIMER_APP_DDTTC					(0x0058)
-/* DD Timer Interrupt Enable Register 32bit (-/W) */
-#define U300_TIMER_APP_DDTIE					(0x005c)
-#define U300_TIMER_APP_DDTIE_IRQ_DISABLE			(0x00000000)
-#define U300_TIMER_APP_DDTIE_IRQ_ENABLE				(0x00000001)
-/* DD Timer Interrupt Acknowledge Register 32bit (-/W) */
-#define U300_TIMER_APP_DDTIA					(0x0060)
-#define U300_TIMER_APP_DDTIA_IRQ_ACK				(0x00000080)
-
-/* Reset GP1 Timer 32bit (-/W) */
-#define U300_TIMER_APP_RGPT1					(0x0080)
-#define U300_TIMER_APP_RGPT1_TIMER_RESET			(0x00000000)
-/* Enable GP1 Timer 32bit (-/W) */
-#define U300_TIMER_APP_EGPT1					(0x0084)
-#define U300_TIMER_APP_EGPT1_TIMER_ENABLE			(0x00000000)
-/* Disable GP1 Timer 32bit (-/W) */
-#define U300_TIMER_APP_DGPT1					(0x0088)
-#define U300_TIMER_APP_DGPT1_TIMER_DISABLE			(0x00000000)
-/* GP1 Timer Mode Register 32bit (-/W) */
-#define U300_TIMER_APP_SGPT1M					(0x008c)
-#define U300_TIMER_APP_SGPT1M_MODE_CONTINUOUS			(0x00000000)
-#define U300_TIMER_APP_SGPT1M_MODE_ONE_SHOT			(0x00000001)
-/* GP1 Timer Status Register 32bit (R/-) */
-#define U300_TIMER_APP_GPT1S					(0x0090)
-#define U300_TIMER_APP_GPT1S_TIMER_STATE_MASK			(0x0000000F)
-#define U300_TIMER_APP_GPT1S_TIMER_STATE_IDLE			(0x00000001)
-#define U300_TIMER_APP_GPT1S_TIMER_STATE_ACTIVE			(0x00000002)
-#define U300_TIMER_APP_GPT1S_ENABLE_IND				(0x00000010)
-#define U300_TIMER_APP_GPT1S_MODE_MASK				(0x00000020)
-#define U300_TIMER_APP_GPT1S_MODE_CONTINUOUS			(0x00000000)
-#define U300_TIMER_APP_GPT1S_MODE_ONE_SHOT			(0x00000020)
-#define U300_TIMER_APP_GPT1S_IRQ_ENABLED_IND			(0x00000040)
-#define U300_TIMER_APP_GPT1S_IRQ_PENDING_IND			(0x00000080)
-/* GP1 Timer Current Count Register 32bit (R/-) */
-#define U300_TIMER_APP_GPT1CC					(0x0094)
-/* GP1 Timer Terminal Count Register 32bit (R/W) */
-#define U300_TIMER_APP_GPT1TC					(0x0098)
-/* GP1 Timer Interrupt Enable Register 32bit (-/W) */
-#define U300_TIMER_APP_GPT1IE					(0x009c)
-#define U300_TIMER_APP_GPT1IE_IRQ_DISABLE			(0x00000000)
-#define U300_TIMER_APP_GPT1IE_IRQ_ENABLE			(0x00000001)
-/* GP1 Timer Interrupt Acknowledge Register 32bit (-/W) */
-#define U300_TIMER_APP_GPT1IA					(0x00a0)
-#define U300_TIMER_APP_GPT1IA_IRQ_ACK				(0x00000080)
-
-/* Reset GP2 Timer 32bit (-/W) */
-#define U300_TIMER_APP_RGPT2					(0x00c0)
-#define U300_TIMER_APP_RGPT2_TIMER_RESET			(0x00000000)
-/* Enable GP2 Timer 32bit (-/W) */
-#define U300_TIMER_APP_EGPT2					(0x00c4)
-#define U300_TIMER_APP_EGPT2_TIMER_ENABLE			(0x00000000)
-/* Disable GP2 Timer 32bit (-/W) */
-#define U300_TIMER_APP_DGPT2					(0x00c8)
-#define U300_TIMER_APP_DGPT2_TIMER_DISABLE			(0x00000000)
-/* GP2 Timer Mode Register 32bit (-/W) */
-#define U300_TIMER_APP_SGPT2M					(0x00cc)
-#define U300_TIMER_APP_SGPT2M_MODE_CONTINUOUS			(0x00000000)
-#define U300_TIMER_APP_SGPT2M_MODE_ONE_SHOT			(0x00000001)
-/* GP2 Timer Status Register 32bit (R/-) */
-#define U300_TIMER_APP_GPT2S					(0x00d0)
-#define U300_TIMER_APP_GPT2S_TIMER_STATE_MASK			(0x0000000F)
-#define U300_TIMER_APP_GPT2S_TIMER_STATE_IDLE			(0x00000001)
-#define U300_TIMER_APP_GPT2S_TIMER_STATE_ACTIVE			(0x00000002)
-#define U300_TIMER_APP_GPT2S_ENABLE_IND				(0x00000010)
-#define U300_TIMER_APP_GPT2S_MODE_MASK				(0x00000020)
-#define U300_TIMER_APP_GPT2S_MODE_CONTINUOUS			(0x00000000)
-#define U300_TIMER_APP_GPT2S_MODE_ONE_SHOT			(0x00000020)
-#define U300_TIMER_APP_GPT2S_IRQ_ENABLED_IND			(0x00000040)
-#define U300_TIMER_APP_GPT2S_IRQ_PENDING_IND			(0x00000080)
-/* GP2 Timer Current Count Register 32bit (R/-) */
-#define U300_TIMER_APP_GPT2CC					(0x00d4)
-/* GP2 Timer Terminal Count Register 32bit (R/W) */
-#define U300_TIMER_APP_GPT2TC					(0x00d8)
-/* GP2 Timer Interrupt Enable Register 32bit (-/W) */
-#define U300_TIMER_APP_GPT2IE					(0x00dc)
-#define U300_TIMER_APP_GPT2IE_IRQ_DISABLE			(0x00000000)
-#define U300_TIMER_APP_GPT2IE_IRQ_ENABLE			(0x00000001)
-/* GP2 Timer Interrupt Acknowledge Register 32bit (-/W) */
-#define U300_TIMER_APP_GPT2IA					(0x00e0)
-#define U300_TIMER_APP_GPT2IA_IRQ_ACK				(0x00000080)
-
-/* Clock request control register - all four timers */
-#define U300_TIMER_APP_CRC					(0x100)
-#define U300_TIMER_APP_CRC_CLOCK_REQUEST_ENABLE			(0x00000001)
-
-static void __iomem *u300_timer_base;
-
-struct u300_clockevent_data {
-	struct clock_event_device cevd;
-	unsigned ticks_per_jiffy;
-};
-
-/*
- * The u300_set_mode() function is always called first, if we
- * have oneshot timer active, the oneshot scheduling function
- * u300_set_next_event() is called immediately after.
- */
-static void u300_set_mode(enum clock_event_mode mode,
-			  struct clock_event_device *evt)
-{
-	struct u300_clockevent_data *cevdata =
-		container_of(evt, struct u300_clockevent_data, cevd);
-
-	switch (mode) {
-	case CLOCK_EVT_MODE_PERIODIC:
-		/* Disable interrupts on GPT1 */
-		writel(U300_TIMER_APP_GPT1IE_IRQ_DISABLE,
-		       u300_timer_base + U300_TIMER_APP_GPT1IE);
-		/* Disable GP1 while we're reprogramming it. */
-		writel(U300_TIMER_APP_DGPT1_TIMER_DISABLE,
-		       u300_timer_base + U300_TIMER_APP_DGPT1);
-		/*
-		 * Set the periodic mode to a certain number of ticks per
-		 * jiffy.
-		 */
-		writel(cevdata->ticks_per_jiffy,
-		       u300_timer_base + U300_TIMER_APP_GPT1TC);
-		/*
-		 * Set continuous mode, so the timer keeps triggering
-		 * interrupts.
-		 */
-		writel(U300_TIMER_APP_SGPT1M_MODE_CONTINUOUS,
-		       u300_timer_base + U300_TIMER_APP_SGPT1M);
-		/* Enable timer interrupts */
-		writel(U300_TIMER_APP_GPT1IE_IRQ_ENABLE,
-		       u300_timer_base + U300_TIMER_APP_GPT1IE);
-		/* Then enable the OS timer again */
-		writel(U300_TIMER_APP_EGPT1_TIMER_ENABLE,
-		       u300_timer_base + U300_TIMER_APP_EGPT1);
-		break;
-	case CLOCK_EVT_MODE_ONESHOT:
-		/* Just break; here? */
-		/*
-		 * The actual event will be programmed by the next event hook,
-		 * so we just set a dummy value somewhere at the end of the
-		 * universe here.
-		 */
-		/* Disable interrupts on GPT1 */
-		writel(U300_TIMER_APP_GPT1IE_IRQ_DISABLE,
-		       u300_timer_base + U300_TIMER_APP_GPT1IE);
-		/* Disable GP1 while we're reprogramming it. */
-		writel(U300_TIMER_APP_DGPT1_TIMER_DISABLE,
-		       u300_timer_base + U300_TIMER_APP_DGPT1);
-		/*
-		 * Expire far in the future, u300_set_next_event() will be
-		 * called soon...
-		 */
-		writel(0xFFFFFFFF, u300_timer_base + U300_TIMER_APP_GPT1TC);
-		/* We run one shot per tick here! */
-		writel(U300_TIMER_APP_SGPT1M_MODE_ONE_SHOT,
-		       u300_timer_base + U300_TIMER_APP_SGPT1M);
-		/* Enable interrupts for this timer */
-		writel(U300_TIMER_APP_GPT1IE_IRQ_ENABLE,
-		       u300_timer_base + U300_TIMER_APP_GPT1IE);
-		/* Enable timer */
-		writel(U300_TIMER_APP_EGPT1_TIMER_ENABLE,
-		       u300_timer_base + U300_TIMER_APP_EGPT1);
-		break;
-	case CLOCK_EVT_MODE_UNUSED:
-	case CLOCK_EVT_MODE_SHUTDOWN:
-		/* Disable interrupts on GP1 */
-		writel(U300_TIMER_APP_GPT1IE_IRQ_DISABLE,
-		       u300_timer_base + U300_TIMER_APP_GPT1IE);
-		/* Disable GP1 */
-		writel(U300_TIMER_APP_DGPT1_TIMER_DISABLE,
-		       u300_timer_base + U300_TIMER_APP_DGPT1);
-		break;
-	case CLOCK_EVT_MODE_RESUME:
-		/* Ignore this call */
-		break;
-	}
-}
-
-/*
- * The app timer in one shot mode obviously has to be reprogrammed
- * in EXACTLY this sequence to work properly. Do NOT try to e.g. replace
- * the interrupt disable + timer disable commands with a reset command,
- * it will fail miserably. Apparently (and I found this the hard way)
- * the timer is very sensitive to the instruction order, though you don't
- * get that impression from the data sheet.
- */
-static int u300_set_next_event(unsigned long cycles,
-			       struct clock_event_device *evt)
-
-{
-	/* Disable interrupts on GPT1 */
-	writel(U300_TIMER_APP_GPT1IE_IRQ_DISABLE,
-	       u300_timer_base + U300_TIMER_APP_GPT1IE);
-	/* Disable GP1 while we're reprogramming it. */
-	writel(U300_TIMER_APP_DGPT1_TIMER_DISABLE,
-	       u300_timer_base + U300_TIMER_APP_DGPT1);
-	/* Reset the General Purpose timer 1. */
-	writel(U300_TIMER_APP_RGPT1_TIMER_RESET,
-	       u300_timer_base + U300_TIMER_APP_RGPT1);
-	/* IRQ in n * cycles */
-	writel(cycles, u300_timer_base + U300_TIMER_APP_GPT1TC);
-	/*
-	 * We run one shot per tick here! (This is necessary to reconfigure,
-	 * the timer will tilt if you don't!)
-	 */
-	writel(U300_TIMER_APP_SGPT1M_MODE_ONE_SHOT,
-	       u300_timer_base + U300_TIMER_APP_SGPT1M);
-	/* Enable timer interrupts */
-	writel(U300_TIMER_APP_GPT1IE_IRQ_ENABLE,
-	       u300_timer_base + U300_TIMER_APP_GPT1IE);
-	/* Then enable the OS timer again */
-	writel(U300_TIMER_APP_EGPT1_TIMER_ENABLE,
-	       u300_timer_base + U300_TIMER_APP_EGPT1);
-	return 0;
-}
-
-static struct u300_clockevent_data u300_clockevent_data = {
-	/* Use general purpose timer 1 as clock event */
-	.cevd = {
-		.name		= "GPT1",
-		/* Reasonably fast and accurate clock event */
-		.rating		= 300,
-		.features	= CLOCK_EVT_FEAT_PERIODIC |
-			CLOCK_EVT_FEAT_ONESHOT,
-		.set_next_event	= u300_set_next_event,
-		.set_mode	= u300_set_mode,
-	},
-};
-
-/* Clock event timer interrupt handler */
-static irqreturn_t u300_timer_interrupt(int irq, void *dev_id)
-{
-	struct clock_event_device *evt = &u300_clockevent_data.cevd;
-	/* ACK/Clear timer IRQ for the APP GPT1 Timer */
-
-	writel(U300_TIMER_APP_GPT1IA_IRQ_ACK,
-		u300_timer_base + U300_TIMER_APP_GPT1IA);
-	evt->event_handler(evt);
-	return IRQ_HANDLED;
-}
-
-static struct irqaction u300_timer_irq = {
-	.name		= "U300 Timer Tick",
-	.flags		= IRQF_DISABLED | IRQF_TIMER | IRQF_IRQPOLL,
-	.handler	= u300_timer_interrupt,
-};
-
-/*
- * Override the global weak sched_clock symbol with this
- * local implementation which uses the clocksource to get some
- * better resolution when scheduling the kernel. We accept that
- * this wraps around for now, since it is just a relative time
- * stamp. (Inspired by OMAP implementation.)
- */
-
-static u64 notrace u300_read_sched_clock(void)
-{
-	return readl(u300_timer_base + U300_TIMER_APP_GPT2CC);
-}
-
-static unsigned long u300_read_current_timer(void)
-{
-	return readl(u300_timer_base + U300_TIMER_APP_GPT2CC);
-}
-
-static struct delay_timer u300_delay_timer;
-
-/*
- * This sets up the system timers, clock source and clock event.
- */
-static void __init u300_timer_init_of(struct device_node *np)
-{
-	unsigned int irq;
-	struct clk *clk;
-	unsigned long rate;
-
-	u300_timer_base = of_iomap(np, 0);
-	if (!u300_timer_base)
-		panic("could not ioremap system timer\n");
-
-	/* Get the IRQ for the GP1 timer */
-	irq = irq_of_parse_and_map(np, 2);
-	if (!irq)
-		panic("no IRQ for system timer\n");
-
-	pr_info("U300 GP1 timer @ base: %p, IRQ: %u\n", u300_timer_base, irq);
-
-	/* Clock the interrupt controller */
-	clk = of_clk_get(np, 0);
-	BUG_ON(IS_ERR(clk));
-	clk_prepare_enable(clk);
-	rate = clk_get_rate(clk);
-
-	u300_clockevent_data.ticks_per_jiffy = DIV_ROUND_CLOSEST(rate, HZ);
-
-	sched_clock_register(u300_read_sched_clock, 32, rate);
-
-	u300_delay_timer.read_current_timer = &u300_read_current_timer;
-	u300_delay_timer.freq = rate;
-	register_current_timer_delay(&u300_delay_timer);
-
-	/*
-	 * Disable the "OS" and "DD" timers - these are designed for Symbian!
-	 * Example usage in cnh1601578 cpu subsystem pd_timer_app.c
-	 */
-	writel(U300_TIMER_APP_CRC_CLOCK_REQUEST_ENABLE,
-		u300_timer_base + U300_TIMER_APP_CRC);
-	writel(U300_TIMER_APP_ROST_TIMER_RESET,
-		u300_timer_base + U300_TIMER_APP_ROST);
-	writel(U300_TIMER_APP_DOST_TIMER_DISABLE,
-		u300_timer_base + U300_TIMER_APP_DOST);
-	writel(U300_TIMER_APP_RDDT_TIMER_RESET,
-		u300_timer_base + U300_TIMER_APP_RDDT);
-	writel(U300_TIMER_APP_DDDT_TIMER_DISABLE,
-		u300_timer_base + U300_TIMER_APP_DDDT);
-
-	/* Reset the General Purpose timer 1. */
-	writel(U300_TIMER_APP_RGPT1_TIMER_RESET,
-		u300_timer_base + U300_TIMER_APP_RGPT1);
-
-	/* Set up the IRQ handler */
-	setup_irq(irq, &u300_timer_irq);
-
-	/* Reset the General Purpose timer 2 */
-	writel(U300_TIMER_APP_RGPT2_TIMER_RESET,
-		u300_timer_base + U300_TIMER_APP_RGPT2);
-	/* Set this timer to run around forever */
-	writel(0xFFFFFFFFU, u300_timer_base + U300_TIMER_APP_GPT2TC);
-	/* Set continuous mode so it wraps around */
-	writel(U300_TIMER_APP_SGPT2M_MODE_CONTINUOUS,
-	       u300_timer_base + U300_TIMER_APP_SGPT2M);
-	/* Disable timer interrupts */
-	writel(U300_TIMER_APP_GPT2IE_IRQ_DISABLE,
-		u300_timer_base + U300_TIMER_APP_GPT2IE);
-	/* Then enable the GP2 timer to use as a free running us counter */
-	writel(U300_TIMER_APP_EGPT2_TIMER_ENABLE,
-		u300_timer_base + U300_TIMER_APP_EGPT2);
-
-	/* Use general purpose timer 2 as clock source */
-	if (clocksource_mmio_init(u300_timer_base + U300_TIMER_APP_GPT2CC,
-			"GPT2", rate, 300, 32, clocksource_mmio_readl_up))
-		pr_err("timer: failed to initialize U300 clock source\n");
-
-	/* Configure and register the clockevent */
-	clockevents_config_and_register(&u300_clockevent_data.cevd, rate,
-					1, 0xffffffff);
-
-	/*
-	 * TODO: init and register the rest of the timers too, they can be
-	 * used by hrtimers!
-	 */
-}
-
-CLOCKSOURCE_OF_DECLARE(u300_timer, "stericsson,u300-apptimer",
-		       u300_timer_init_of);
diff --git a/arch/arm/mach-zynq/Kconfig b/arch/arm/mach-zynq/Kconfig
index 6b04260..f03e75b 100644
--- a/arch/arm/mach-zynq/Kconfig
+++ b/arch/arm/mach-zynq/Kconfig
@@ -2,6 +2,8 @@ config ARCH_ZYNQ
 	bool "Xilinx Zynq ARM Cortex A9 Platform" if ARCH_MULTI_V7
 	select ARM_AMBA
 	select ARM_GIC
+	select ARCH_HAS_CPUFREQ
+	select ARCH_HAS_OPP
 	select COMMON_CLK
 	select CPU_V7
 	select GENERIC_CLOCKEVENTS
@@ -13,6 +15,6 @@ config ARCH_ZYNQ
 	select HAVE_SMP
 	select SPARSE_IRQ
 	select CADENCE_TTC_TIMER
-	select ARM_GLOBAL_TIMER
+	select ARM_GLOBAL_TIMER if !CPU_FREQ
 	help
 	  Support for Xilinx Zynq ARM Cortex A9 Platform
diff --git a/arch/arm/mach-zynq/common.c b/arch/arm/mach-zynq/common.c
index 8c09a83..a39be8e 100644
--- a/arch/arm/mach-zynq/common.c
+++ b/arch/arm/mach-zynq/common.c
@@ -64,6 +64,8 @@ static struct platform_device zynq_cpuidle_device = {
  */
 static void __init zynq_init_machine(void)
 {
+	struct platform_device_info devinfo = { .name = "cpufreq-cpu0", };
+
 	/*
 	 * 64KB way size, 8-way associativity, parity disabled
 	 */
@@ -72,6 +74,7 @@ static void __init zynq_init_machine(void)
 	of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL);
 
 	platform_device_register(&zynq_cpuidle_device);
+	platform_device_register_full(&devinfo);
 }
 
 static void __init zynq_timer_init(void)
diff --git a/arch/arm/mm/dump.c b/arch/arm/mm/dump.c
index 2b3a564..ef69152 100644
--- a/arch/arm/mm/dump.c
+++ b/arch/arm/mm/dump.c
@@ -264,6 +264,9 @@ static void walk_pmd(struct pg_state *st, pud_t *pud, unsigned long start)
 			note_page(st, addr, 3, pmd_val(*pmd));
 		else
 			walk_pte(st, pmd, addr);
+
+		if (SECTION_SIZE < PMD_SIZE && pmd_large(pmd[1]))
+			note_page(st, addr + SECTION_SIZE, 3, pmd_val(pmd[1]));
 	}
 }