Merge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux-2.6

61 files changed, 437 insertions, 361 deletions

diff --git a/arch/arm/boot/compressed/head-xscale.S b/arch/arm/boot/compressed/head-xscale.S
index 67ea99e..dd3fbd6 100644
--- a/arch/arm/boot/compressed/head-xscale.S
+++ b/arch/arm/boot/compressed/head-xscale.S
@@ -33,10 +33,6 @@ __XScale_start:
 		bic	r0, r0, #0x1000		@ clear Icache
 		mcr	p15, 0, r0, c1, c0, 0
 
-#ifdef CONFIG_ARCH_COTULLA_IDP
-		mov	r7, #MACH_TYPE_COTULLA_IDP
-#endif
-
 #ifdef CONFIG_ARCH_IXP2000
 		mov	r1, #-1
 		mov	r0, #0xd6000000
diff --git a/arch/arm/common/dmabounce.c b/arch/arm/common/dmabounce.c
index 52fc6a8..2744673 100644
--- a/arch/arm/common/dmabounce.c
+++ b/arch/arm/common/dmabounce.c
@@ -650,7 +650,8 @@ EXPORT_SYMBOL(dma_map_sg);
 EXPORT_SYMBOL(dma_unmap_sg);
 EXPORT_SYMBOL(dma_sync_single_for_cpu);
 EXPORT_SYMBOL(dma_sync_single_for_device);
-EXPORT_SYMBOL(dma_sync_sg);
+EXPORT_SYMBOL(dma_sync_sg_for_cpu);
+EXPORT_SYMBOL(dma_sync_sg_for_device);
 EXPORT_SYMBOL(dmabounce_register_dev);
 EXPORT_SYMBOL(dmabounce_unregister_dev);
 
diff --git a/arch/arm/common/locomo.c b/arch/arm/common/locomo.c
index ae21755..d973c98 100644
--- a/arch/arm/common/locomo.c
+++ b/arch/arm/common/locomo.c
@@ -321,11 +321,42 @@ static void locomo_gpio_unmask_irq(unsigned int irq)
 	locomo_writel(r, mapbase + LOCOMO_GIE);
 }
 
+static int GPIO_IRQ_rising_edge;
+static int GPIO_IRQ_falling_edge;
+
+static int locomo_gpio_type(unsigned int irq, unsigned int type)
+{
+	unsigned int mask;
+	void __iomem *mapbase = get_irq_chip_data(irq);
+
+	mask = 1 << (irq - LOCOMO_IRQ_GPIO_START);
+
+	if (type == IRQT_PROBE) {
+		if ((GPIO_IRQ_rising_edge | GPIO_IRQ_falling_edge) & mask)
+			return 0;
+		type = __IRQT_RISEDGE | __IRQT_FALEDGE;
+	}
+
+	if (type & __IRQT_RISEDGE)
+		GPIO_IRQ_rising_edge |= mask;
+	else
+		GPIO_IRQ_rising_edge &= ~mask;
+	if (type & __IRQT_FALEDGE)
+		GPIO_IRQ_falling_edge |= mask;
+	else
+		GPIO_IRQ_falling_edge &= ~mask;
+	locomo_writel(GPIO_IRQ_rising_edge, mapbase + LOCOMO_GRIE);
+	locomo_writel(GPIO_IRQ_falling_edge, mapbase + LOCOMO_GFIE);
+
+	return 0;
+}
+
 static struct irq_chip locomo_gpio_chip = {
-	.name	= "LOCOMO-gpio",
-	.ack	= locomo_gpio_ack_irq,
-	.mask	= locomo_gpio_mask_irq,
-	.unmask	= locomo_gpio_unmask_irq,
+	.name	  = "LOCOMO-gpio",
+	.ack	  = locomo_gpio_ack_irq,
+	.mask	  = locomo_gpio_mask_irq,
+	.unmask	  = locomo_gpio_unmask_irq,
+	.set_type = locomo_gpio_type,
 };
 
 static void locomo_lt_handler(unsigned int irq, struct irq_desc *desc)
@@ -450,22 +481,18 @@ static void locomo_setup_irq(struct locomo *lchip)
 	set_irq_chip(IRQ_LOCOMO_KEY_BASE, &locomo_chip);
 	set_irq_chip_data(IRQ_LOCOMO_KEY_BASE, irqbase);
 	set_irq_chained_handler(IRQ_LOCOMO_KEY_BASE, locomo_key_handler);
-	set_irq_flags(IRQ_LOCOMO_KEY_BASE, IRQF_VALID | IRQF_PROBE);
 
 	set_irq_chip(IRQ_LOCOMO_GPIO_BASE, &locomo_chip);
 	set_irq_chip_data(IRQ_LOCOMO_GPIO_BASE, irqbase);
 	set_irq_chained_handler(IRQ_LOCOMO_GPIO_BASE, locomo_gpio_handler);
-	set_irq_flags(IRQ_LOCOMO_GPIO_BASE, IRQF_VALID | IRQF_PROBE);
 
 	set_irq_chip(IRQ_LOCOMO_LT_BASE, &locomo_chip);
 	set_irq_chip_data(IRQ_LOCOMO_LT_BASE, irqbase);
 	set_irq_chained_handler(IRQ_LOCOMO_LT_BASE, locomo_lt_handler);
-	set_irq_flags(IRQ_LOCOMO_LT_BASE, IRQF_VALID | IRQF_PROBE);
 
 	set_irq_chip(IRQ_LOCOMO_SPI_BASE, &locomo_chip);
 	set_irq_chip_data(IRQ_LOCOMO_SPI_BASE, irqbase);
 	set_irq_chained_handler(IRQ_LOCOMO_SPI_BASE, locomo_spi_handler);
-	set_irq_flags(IRQ_LOCOMO_SPI_BASE, IRQF_VALID | IRQF_PROBE);
 
 	/* install handlers for IRQ_LOCOMO_KEY_BASE generated interrupts */
 	set_irq_chip(LOCOMO_IRQ_KEY_START, &locomo_key_chip);
@@ -488,7 +515,7 @@ static void locomo_setup_irq(struct locomo *lchip)
 	set_irq_flags(LOCOMO_IRQ_LT_START, IRQF_VALID | IRQF_PROBE);
 
 	/* install handlers for IRQ_LOCOMO_SPI_BASE generated interrupts */
-	for (irq = LOCOMO_IRQ_SPI_START; irq < LOCOMO_IRQ_SPI_START + 3; irq++) {
+	for (irq = LOCOMO_IRQ_SPI_START; irq < LOCOMO_IRQ_SPI_START + 4; irq++) {
 		set_irq_chip(irq, &locomo_spi_chip);
 		set_irq_chip_data(irq, irqbase);
 		set_irq_handler(irq, handle_edge_irq);
@@ -574,20 +601,20 @@ static int locomo_suspend(struct platform_device *dev, pm_message_t state)
 
 	save->LCM_GPO     = locomo_readl(lchip->base + LOCOMO_GPO);	/* GPIO */
 	locomo_writel(0x00, lchip->base + LOCOMO_GPO);
-	save->LCM_SPICT   = locomo_readl(lchip->base + LOCOMO_SPICT);	/* SPI */
+	save->LCM_SPICT   = locomo_readl(lchip->base + LOCOMO_SPI + LOCOMO_SPICT);	/* SPI */
 	locomo_writel(0x40, lchip->base + LOCOMO_SPICT);
 	save->LCM_GPE     = locomo_readl(lchip->base + LOCOMO_GPE);	/* GPIO */
 	locomo_writel(0x00, lchip->base + LOCOMO_GPE);
 	save->LCM_ASD     = locomo_readl(lchip->base + LOCOMO_ASD);	/* ADSTART */
 	locomo_writel(0x00, lchip->base + LOCOMO_ASD);
-	save->LCM_SPIMD   = locomo_readl(lchip->base + LOCOMO_SPIMD);	/* SPI */
-	locomo_writel(0x3C14, lchip->base + LOCOMO_SPIMD);
+	save->LCM_SPIMD   = locomo_readl(lchip->base + LOCOMO_SPI + LOCOMO_SPIMD);	/* SPI */
+	locomo_writel(0x3C14, lchip->base + LOCOMO_SPI + LOCOMO_SPIMD);
 
 	locomo_writel(0x00, lchip->base + LOCOMO_PAIF);
 	locomo_writel(0x00, lchip->base + LOCOMO_DAC);
 	locomo_writel(0x00, lchip->base + LOCOMO_BACKLIGHT + LOCOMO_TC);
 
-	if ( (locomo_readl(lchip->base + LOCOMO_LED + LOCOMO_LPT0) & 0x88) && (locomo_readl(lchip->base + LOCOMO_LED + LOCOMO_LPT1) & 0x88) )
+	if ((locomo_readl(lchip->base + LOCOMO_LED + LOCOMO_LPT0) & 0x88) && (locomo_readl(lchip->base + LOCOMO_LED + LOCOMO_LPT1) & 0x88))
 		locomo_writel(0x00, lchip->base + LOCOMO_C32K); 	/* CLK32 off */
 	else
 		/* 18MHz already enabled, so no wait */
@@ -616,10 +643,10 @@ static int locomo_resume(struct platform_device *dev)
 	spin_lock_irqsave(&lchip->lock, flags);
 
 	locomo_writel(save->LCM_GPO, lchip->base + LOCOMO_GPO);
-	locomo_writel(save->LCM_SPICT, lchip->base + LOCOMO_SPICT);
+	locomo_writel(save->LCM_SPICT, lchip->base + LOCOMO_SPI + LOCOMO_SPICT);
 	locomo_writel(save->LCM_GPE, lchip->base + LOCOMO_GPE);
 	locomo_writel(save->LCM_ASD, lchip->base + LOCOMO_ASD);
-	locomo_writel(save->LCM_SPIMD, lchip->base + LOCOMO_SPIMD);
+	locomo_writel(save->LCM_SPIMD, lchip->base + LOCOMO_SPI + LOCOMO_SPIMD);
 
 	locomo_writel(0x00, lchip->base + LOCOMO_C32K);
 	locomo_writel(0x90, lchip->base + LOCOMO_TADC);
@@ -688,9 +715,9 @@ __locomo_probe(struct device *me, struct resource *mem, int irq)
 
 	/* GPIO */
 	locomo_writel(0, lchip->base + LOCOMO_GPO);
-	locomo_writel( (LOCOMO_GPIO(2) | LOCOMO_GPIO(3) | LOCOMO_GPIO(13) | LOCOMO_GPIO(14))
+	locomo_writel((LOCOMO_GPIO(1) | LOCOMO_GPIO(2) | LOCOMO_GPIO(13) | LOCOMO_GPIO(14))
 			, lchip->base + LOCOMO_GPE);
-	locomo_writel( (LOCOMO_GPIO(2) | LOCOMO_GPIO(3) | LOCOMO_GPIO(13) | LOCOMO_GPIO(14))
+	locomo_writel((LOCOMO_GPIO(1) | LOCOMO_GPIO(2) | LOCOMO_GPIO(13) | LOCOMO_GPIO(14))
 			, lchip->base + LOCOMO_GPD);
 	locomo_writel(0, lchip->base + LOCOMO_GIE);
 
@@ -833,7 +860,10 @@ void locomo_gpio_set_dir(struct device *dev, unsigned int bits, unsigned int dir
 	spin_lock_irqsave(&lchip->lock, flags);
 
 	r = locomo_readl(lchip->base + LOCOMO_GPD);
-	r &= ~bits;
+	if (dir)
+		r |= bits;
+	else
+		r &= ~bits;
 	locomo_writel(r, lchip->base + LOCOMO_GPD);
 
 	r = locomo_readl(lchip->base + LOCOMO_GPE);
diff --git a/arch/arm/kernel/armksyms.c b/arch/arm/kernel/armksyms.c
index f73d62e..688b7b1 100644
--- a/arch/arm/kernel/armksyms.c
+++ b/arch/arm/kernel/armksyms.c
@@ -179,3 +179,5 @@ EXPORT_SYMBOL(_find_next_zero_bit_be);
 EXPORT_SYMBOL(_find_first_bit_be);
 EXPORT_SYMBOL(_find_next_bit_be);
 #endif
+
+EXPORT_SYMBOL(copy_page);
diff --git a/arch/arm/kernel/arthur.c b/arch/arm/kernel/arthur.c
index 0ee2e98..321c529 100644
--- a/arch/arm/kernel/arthur.c
+++ b/arch/arm/kernel/arthur.c
@@ -90,3 +90,5 @@ static void __exit arthur_exit(void)
 
 module_init(arthur_init);
 module_exit(arthur_exit);
+
+MODULE_LICENSE("GPL");
diff --git a/arch/arm/kernel/init_task.c b/arch/arm/kernel/init_task.c
index bd4ef53..8b8c9d3 100644
--- a/arch/arm/kernel/init_task.c
+++ b/arch/arm/kernel/init_task.c
@@ -13,7 +13,6 @@
 #include <asm/pgtable.h>
 
 static struct fs_struct init_fs = INIT_FS;
-static struct files_struct init_files = INIT_FILES;
 static struct signal_struct init_signals = INIT_SIGNALS(init_signals);
 static struct sighand_struct init_sighand = INIT_SIGHAND(init_sighand);
 struct mm_struct init_mm = INIT_MM(init_mm);
diff --git a/arch/arm/kernel/sys_arm.c b/arch/arm/kernel/sys_arm.c
index 9bd1870..0128687 100644
--- a/arch/arm/kernel/sys_arm.c
+++ b/arch/arm/kernel/sys_arm.c
@@ -34,23 +34,6 @@ extern unsigned long do_mremap(unsigned long addr, unsigned long old_len,
 			       unsigned long new_len, unsigned long flags,
 			       unsigned long new_addr);
 
-/*
- * sys_pipe() is the normal C calling standard for creating
- * a pipe. It's not the way unix traditionally does this, though.
- */
-asmlinkage int sys_pipe(unsigned long __user *fildes)
-{
-	int fd[2];
-	int error;
-
-	error = do_pipe(fd);
-	if (!error) {
-		if (copy_to_user(fildes, fd, 2*sizeof(int)))
-			error = -EFAULT;
-	}
-	return error;
-}
-
 /* common code for old and new mmaps */
 inline long do_mmap2(
 	unsigned long addr, unsigned long len,
diff --git a/arch/arm/mach-at91/at91sam9261_devices.c b/arch/arm/mach-at91/at91sam9261_devices.c
index 6b9e423..247e8e7 100644
--- a/arch/arm/mach-at91/at91sam9261_devices.c
+++ b/arch/arm/mach-at91/at91sam9261_devices.c
@@ -544,10 +544,10 @@ void __init at91_add_device_lcdc(struct atmel_lcdfb_info *data)
 		struct resource *fb_res = &lcdc_resources[2];
 		size_t fb_len = fb_res->end - fb_res->start + 1;
 
-		fb = ioremap_writecombine(fb_res->start, fb_len);
+		fb = ioremap(fb_res->start, fb_len);
 		if (fb) {
 			memset(fb, 0, fb_len);
-			iounmap(fb, fb_len);
+			iounmap(fb);
 		}
 	}
 	lcdc_data = *data;
diff --git a/arch/arm/mach-at91/at91sam9rl_devices.c b/arch/arm/mach-at91/at91sam9rl_devices.c
index b21f333..9945cd2 100644
--- a/arch/arm/mach-at91/at91sam9rl_devices.c
+++ b/arch/arm/mach-at91/at91sam9rl_devices.c
@@ -332,13 +332,6 @@ static struct resource lcdc_resources[] = {
 		.end	= AT91SAM9RL_ID_LCDC,
 		.flags	= IORESOURCE_IRQ,
 	},
-#if defined(CONFIG_FB_INTSRAM)
-	[2] = {
-		.start	= AT91SAM9RL_SRAM_BASE,
-		.end	= AT91SAM9RL_SRAM_BASE + AT91SAM9RL_SRAM_SIZE - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-#endif
 };
 
 static struct platform_device at91_lcdc_device = {
@@ -381,20 +374,6 @@ void __init at91_add_device_lcdc(struct atmel_lcdfb_info *data)
 	at91_set_B_periph(AT91_PIN_PC24, 0);	/* LCDD22 */
 	at91_set_B_periph(AT91_PIN_PC25, 0);	/* LCDD23 */
 
-#ifdef CONFIG_FB_INTSRAM
-	{
-		void __iomem *fb;
-		struct resource *fb_res = &lcdc_resources[2];
-		size_t fb_len = fb_res->end - fb_res->start + 1;
-
-		fb = ioremap_writecombine(fb_res->start, fb_len);
-		if (fb) {
-			memset(fb, 0, fb_len);
-			iounmap(fb, fb_len);
-		}
-	}
-#endif
-
 	lcdc_data = *data;
 	platform_device_register(&at91_lcdc_device);
 }
diff --git a/arch/arm/mach-at91/at91x40.c b/arch/arm/mach-at91/at91x40.c
index 1de121f..f446477 100644
--- a/arch/arm/mach-at91/at91x40.c
+++ b/arch/arm/mach-at91/at91x40.c
@@ -16,16 +16,32 @@
 #include <asm/mach/arch.h>
 #include <asm/arch/at91x40.h>
 #include <asm/arch/at91_st.h>
+#include <asm/arch/timex.h>
 #include "generic.h"
 
 /*
- * This is used in the gpio code, stub locally.
+ * Export the clock functions for the AT91X40. Some external code common
+ * to all AT91 family parts relys on this, like the gpio and serial support.
  */
 int clk_enable(struct clk *clk)
 {
 	return 0;
 }
 
+void clk_disable(struct clk *clk)
+{
+}
+
+unsigned long clk_get_rate(struct clk *clk)
+{
+	return AT91X40_MASTER_CLOCK;
+}
+
+struct clk *clk_get(struct device *dev, const char *id)
+{
+	return NULL;
+}
+
 void __init at91x40_initialize(unsigned long main_clock)
 {
 	at91_extern_irq = (1 << AT91X40_ID_IRQ0) | (1 << AT91X40_ID_IRQ1)
diff --git a/arch/arm/mach-ep93xx/core.c b/arch/arm/mach-ep93xx/core.c
index 8bc1872..1d7bca6 100644
--- a/arch/arm/mach-ep93xx/core.c
+++ b/arch/arm/mach-ep93xx/core.c
@@ -280,7 +280,7 @@ static int ep93xx_gpio_irq_type(unsigned int irq, unsigned int type)
 	const int port = gpio >> 3;
 	const int port_mask = 1 << (gpio & 7);
 
-	gpio_direction_output(gpio, gpio_get_value(gpio));
+	gpio_direction_input(gpio);
 
 	switch (type) {
 	case IRQT_RISING:
diff --git a/arch/arm/mach-integrator/impd1.c b/arch/arm/mach-integrator/impd1.c
index 92d79fb..62e653a 100644
--- a/arch/arm/mach-integrator/impd1.c
+++ b/arch/arm/mach-integrator/impd1.c
@@ -369,7 +369,8 @@ static int impd1_probe(struct lm_device *dev)
 
 	lm_set_drvdata(dev, impd1);
 
-	printk("IM-PD1 found at 0x%08lx\n", dev->resource.start);
+	printk("IM-PD1 found at 0x%08lx\n",
+		(unsigned long)dev->resource.start);
 
 	for (i = 0; i < ARRAY_SIZE(impd1->vcos); i++) {
 		impd1->vcos[i].owner = THIS_MODULE,
diff --git a/arch/arm/mach-integrator/pci_v3.c b/arch/arm/mach-integrator/pci_v3.c
index d55fa4e..c07f497 100644
--- a/arch/arm/mach-integrator/pci_v3.c
+++ b/arch/arm/mach-integrator/pci_v3.c
@@ -405,7 +405,6 @@ v3_pci_fault(unsigned long addr, unsigned int fsr, struct pt_regs *regs)
 		addr, fsr, pc, instr, __raw_readl(SC_LBFADDR), __raw_readl(SC_LBFCODE) & 255,
 		v3_readb(V3_LB_ISTAT));
 	printk(KERN_DEBUG "%s", buf);
-	printascii(buf);
 #endif
 
 	v3_writeb(V3_LB_ISTAT, 0);
@@ -447,6 +446,7 @@ static irqreturn_t v3_irq(int dummy, void *devid)
 	unsigned long pc = instruction_pointer(regs);
 	unsigned long instr = *(unsigned long *)pc;
 	char buf[128];
+	extern void printascii(const char *);
 
 	sprintf(buf, "V3 int %d: pc=0x%08lx [%08lx] LBFADDR=%08x LBFCODE=%02x "
 		"ISTAT=%02x\n", IRQ_AP_V3INT, pc, instr,
diff --git a/arch/arm/mach-ns9xxx/irq.c b/arch/arm/mach-ns9xxx/irq.c
index 36e5835..ca85d24 100644
--- a/arch/arm/mach-ns9xxx/irq.c
+++ b/arch/arm/mach-ns9xxx/irq.c
@@ -62,7 +62,7 @@ static struct irq_chip ns9xxx_chip = {
 #if 0
 #define handle_irq handle_level_irq
 #else
-void handle_prio_irq(unsigned int irq, struct irq_desc *desc)
+static void handle_prio_irq(unsigned int irq, struct irq_desc *desc)
 {
 	unsigned int cpu = smp_processor_id();
 	struct irqaction *action;
@@ -70,27 +70,35 @@ void handle_prio_irq(unsigned int irq, struct irq_desc *desc)
 
 	spin_lock(&desc->lock);
 
-	if (unlikely(desc->status & IRQ_INPROGRESS))
-		goto out_unlock;
+	BUG_ON(desc->status & IRQ_INPROGRESS);
 
 	desc->status &= ~(IRQ_REPLAY | IRQ_WAITING);
 	kstat_cpu(cpu).irqs[irq]++;
 
 	action = desc->action;
 	if (unlikely(!action || (desc->status & IRQ_DISABLED)))
-		goto out_unlock;
+		goto out_mask;
 
 	desc->status |= IRQ_INPROGRESS;
 	spin_unlock(&desc->lock);
 
 	action_ret = handle_IRQ_event(irq, action);
 
+	/* XXX: There is no direct way to access noirqdebug, so check
+	 * unconditionally for spurious irqs...
+	 * Maybe this function should go to kernel/irq/chip.c? */
+	note_interrupt(irq, desc, action_ret);
+
 	spin_lock(&desc->lock);
 	desc->status &= ~IRQ_INPROGRESS;
-	if (!(desc->status & IRQ_DISABLED) && desc->chip->ack)
-		desc->chip->ack(irq);
 
-out_unlock:
+	if (desc->status & IRQ_DISABLED)
+out_mask:
+		desc->chip->mask(irq);
+
+	/* ack unconditionally to unmask lower prio irqs */
+	desc->chip->ack(irq);
+
 	spin_unlock(&desc->lock);
 }
 #define handle_irq handle_prio_irq
diff --git a/arch/arm/mach-omap1/board-palmte.c b/arch/arm/mach-omap1/board-palmte.c
index ca1a4bf..a4d2012 100644
--- a/arch/arm/mach-omap1/board-palmte.c
+++ b/arch/arm/mach-omap1/board-palmte.c
@@ -24,7 +24,6 @@
 #include <linux/mtd/mtd.h>
 #include <linux/mtd/partitions.h>
 #include <linux/spi/spi.h>
-#include <linux/spi/tsc2102.h>
 #include <linux/interrupt.h>
 #include <linux/apm-emulation.h>
 
@@ -63,7 +62,7 @@ static const int palmte_keymap[] = {
 	KEY(1, 1, KEY_DOWN),
 	KEY(1, 2, KEY_UP),
 	KEY(1, 3, KEY_RIGHT),
-	KEY(1, 4, KEY_CENTER),
+	KEY(1, 4, KEY_ENTER),
 	0,
 };
 
@@ -315,14 +314,6 @@ static void palmte_get_power_status(struct apm_power_info *info, int *battery)
 #define palmte_get_power_status	NULL
 #endif
 
-static struct tsc2102_config palmte_tsc2102_config = {
-	.use_internal	= 0,
-	.monitor	= TSC_BAT1 | TSC_AUX | TSC_TEMP,
-	.temp_at25c	= { 2200, 2615 },
-	.apm_report	= palmte_get_power_status,
-	.alsa_config	= &palmte_alsa_config,
-};
-
 static struct omap_board_config_kernel palmte_config[] __initdata = {
 	{ OMAP_TAG_USB,		&palmte_usb_config },
 	{ OMAP_TAG_MMC,		&palmte_mmc_config },
@@ -336,7 +327,6 @@ static struct spi_board_info palmte_spi_info[] __initdata = {
 		.bus_num	= 2,	/* uWire (officially) */
 		.chip_select	= 0,	/* As opposed to 3 */
 		.irq		= OMAP_GPIO_IRQ(PALMTE_PINTDAV_GPIO),
-		.platform_data	= &palmte_tsc2102_config,
 		.max_speed_hz	= 8000000,
 	},
 };
diff --git a/arch/arm/mach-omap1/board-palmz71.c b/arch/arm/mach-omap1/board-palmz71.c
index 1565107..e020c27 100644
--- a/arch/arm/mach-omap1/board-palmz71.c
+++ b/arch/arm/mach-omap1/board-palmz71.c
@@ -65,7 +65,7 @@ static int palmz71_keymap[] = {
 	KEY(1, 1, KEY_DOWN),
 	KEY(1, 2, KEY_UP),
 	KEY(1, 3, KEY_RIGHT),
-	KEY(1, 4, KEY_CENTER),
+	KEY(1, 4, KEY_ENTER),
 	KEY(2, 0, KEY_CAMERA),
 	0,
 };
diff --git a/arch/arm/mach-omap2/board-2430sdp.c b/arch/arm/mach-omap2/board-2430sdp.c
index 1c12d7c..1682eb7 100644
--- a/arch/arm/mach-omap2/board-2430sdp.c
+++ b/arch/arm/mach-omap2/board-2430sdp.c
@@ -208,6 +208,7 @@ static void __init omap_2430sdp_init(void)
 
 static void __init omap_2430sdp_map_io(void)
 {
+	omap2_set_globals_243x();
 	omap2_map_common_io();
 }
 
diff --git a/arch/arm/mach-omap2/board-apollon.c b/arch/arm/mach-omap2/board-apollon.c
index a1e1e67..620fa0f 100644
--- a/arch/arm/mach-omap2/board-apollon.c
+++ b/arch/arm/mach-omap2/board-apollon.c
@@ -394,6 +394,7 @@ static void __init omap_apollon_init(void)
 
 static void __init omap_apollon_map_io(void)
 {
+	omap2_set_globals_242x();
 	omap2_map_common_io();
 }
 
diff --git a/arch/arm/mach-omap2/board-generic.c b/arch/arm/mach-omap2/board-generic.c
index 9093815..df8be08 100644
--- a/arch/arm/mach-omap2/board-generic.c
+++ b/arch/arm/mach-omap2/board-generic.c
@@ -65,6 +65,7 @@ static void __init omap_generic_init(void)
 
 static void __init omap_generic_map_io(void)
 {
+	omap2_set_globals_242x(); /* should be 242x, 243x, or 343x */
 	omap2_map_common_io();
 }
 
diff --git a/arch/arm/mach-omap2/board-h4.c b/arch/arm/mach-omap2/board-h4.c
index d1915f9..0d28f68 100644
--- a/arch/arm/mach-omap2/board-h4.c
+++ b/arch/arm/mach-omap2/board-h4.c
@@ -420,6 +420,7 @@ static void __init omap_h4_init(void)
 
 static void __init omap_h4_map_io(void)
 {
+	omap2_set_globals_242x();
 	omap2_map_common_io();
 }
 
diff --git a/arch/arm/mach-omap2/clock.c b/arch/arm/mach-omap2/clock.c
index b57ffb5..ab9fc57 100644
--- a/arch/arm/mach-omap2/clock.c
+++ b/arch/arm/mach-omap2/clock.c
@@ -205,7 +205,9 @@ static void omap2_clk_wait_ready(struct clk *clk)
 	/* REVISIT: What are the appropriate exclusions for 34XX? */
 	/* OMAP3: ignore DSS-mod clocks */
 	if (cpu_is_omap34xx() &&
-	    (((u32)reg & ~0xff) == (u32)OMAP_CM_REGADDR(OMAP3430_DSS_MOD, 0)))
+	    (((u32)reg & ~0xff) == (u32)OMAP_CM_REGADDR(OMAP3430_DSS_MOD, 0) ||
+	     ((((u32)reg & ~0xff) == (u32)OMAP_CM_REGADDR(CORE_MOD, 0)) &&
+	     clk->enable_bit == OMAP3430_EN_SSI_SHIFT)))
 		return;
 
 	/* Check if both functional and interface clocks
diff --git a/arch/arm/mach-omap2/clock34xx.h b/arch/arm/mach-omap2/clock34xx.h
index cf4644a..c9c5972 100644
--- a/arch/arm/mach-omap2/clock34xx.h
+++ b/arch/arm/mach-omap2/clock34xx.h
@@ -836,7 +836,8 @@ static struct clk dpll5_m2_ck = {
 	.clksel_reg	= OMAP_CM_REGADDR(PLL_MOD, OMAP3430ES2_CM_CLKSEL5),
 	.clksel_mask	= OMAP3430ES2_DIV_120M_MASK,
 	.clksel		= div16_dpll5_clksel,
-	.flags		= CLOCK_IN_OMAP3430ES2 | RATE_PROPAGATES,
+	.flags		= CLOCK_IN_OMAP3430ES2 | RATE_PROPAGATES |
+				PARENT_CONTROLS_CLOCK,
 	.recalc		= &omap2_clksel_recalc,
 };
 
@@ -1046,12 +1047,13 @@ static struct clk iva2_ck = {
 	.name		= "iva2_ck",
 	.parent		= &dpll2_m2_ck,
 	.init		= &omap2_init_clksel_parent,
+	.enable_reg	= OMAP_CM_REGADDR(OMAP3430_IVA2_MOD, CM_FCLKEN),
+	.enable_bit	= OMAP3430_CM_FCLKEN_IVA2_EN_IVA2_SHIFT,
 	.clksel_reg	= OMAP_CM_REGADDR(OMAP3430_IVA2_MOD,
 					  OMAP3430_CM_IDLEST_PLL),
 	.clksel_mask	= OMAP3430_ST_IVA2_CLK_MASK,
 	.clksel		= iva2_clksel,
-	.flags		= CLOCK_IN_OMAP343X | RATE_PROPAGATES |
-				PARENT_CONTROLS_CLOCK,
+	.flags		= CLOCK_IN_OMAP343X | RATE_PROPAGATES,
 	.recalc		= &omap2_clksel_recalc,
 };
 
@@ -1836,7 +1838,8 @@ static struct clk omapctrl_ick = {
 static struct clk ssi_l4_ick = {
 	.name		= "ssi_l4_ick",
 	.parent		= &l4_ick,
-	.flags		= CLOCK_IN_OMAP343X | RATE_PROPAGATES,
+	.flags		= CLOCK_IN_OMAP343X | RATE_PROPAGATES |
+				PARENT_CONTROLS_CLOCK,
 	.recalc		= &followparent_recalc,
 };
 
@@ -2344,7 +2347,7 @@ static struct clk gpio6_fck = {
 	.name		= "gpio6_fck",
 	.parent		= &per_32k_alwon_fck,
 	.enable_reg	= OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_FCLKEN),
-	.enable_bit	= OMAP3430_EN_GPT6_SHIFT,
+	.enable_bit	= OMAP3430_EN_GPIO6_SHIFT,
 	.flags		= CLOCK_IN_OMAP343X,
 	.recalc		= &followparent_recalc,
 };
@@ -2353,7 +2356,7 @@ static struct clk gpio5_fck = {
 	.name		= "gpio5_fck",
 	.parent		= &per_32k_alwon_fck,
 	.enable_reg	= OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_FCLKEN),
-	.enable_bit	= OMAP3430_EN_GPT5_SHIFT,
+	.enable_bit	= OMAP3430_EN_GPIO5_SHIFT,
 	.flags		= CLOCK_IN_OMAP343X,
 	.recalc		= &followparent_recalc,
 };
@@ -2362,7 +2365,7 @@ static struct clk gpio4_fck = {
 	.name		= "gpio4_fck",
 	.parent		= &per_32k_alwon_fck,
 	.enable_reg	= OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_FCLKEN),
-	.enable_bit	= OMAP3430_EN_GPT4_SHIFT,
+	.enable_bit	= OMAP3430_EN_GPIO4_SHIFT,
 	.flags		= CLOCK_IN_OMAP343X,
 	.recalc		= &followparent_recalc,
 };
@@ -2371,7 +2374,7 @@ static struct clk gpio3_fck = {
 	.name		= "gpio3_fck",
 	.parent		= &per_32k_alwon_fck,
 	.enable_reg	= OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_FCLKEN),
-	.enable_bit	= OMAP3430_EN_GPT3_SHIFT,
+	.enable_bit	= OMAP3430_EN_GPIO3_SHIFT,
 	.flags		= CLOCK_IN_OMAP343X,
 	.recalc		= &followparent_recalc,
 };
@@ -2380,7 +2383,7 @@ static struct clk gpio2_fck = {
 	.name		= "gpio2_fck",
 	.parent		= &per_32k_alwon_fck,
 	.enable_reg	= OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_FCLKEN),
-	.enable_bit	= OMAP3430_EN_GPT2_SHIFT,
+	.enable_bit	= OMAP3430_EN_GPIO2_SHIFT,
 	.flags		= CLOCK_IN_OMAP343X,
 	.recalc		= &followparent_recalc,
 };
diff --git a/arch/arm/mach-omap2/cm-regbits-34xx.h b/arch/arm/mach-omap2/cm-regbits-34xx.h
index 9249129..3c38395 100644
--- a/arch/arm/mach-omap2/cm-regbits-34xx.h
+++ b/arch/arm/mach-omap2/cm-regbits-34xx.h
@@ -56,6 +56,7 @@
 
 /* CM_FCLKEN_IVA2 */
 #define OMAP3430_CM_FCLKEN_IVA2_EN_IVA2			(1 << 0)
+#define OMAP3430_CM_FCLKEN_IVA2_EN_IVA2_SHIFT		0
 
 /* CM_CLKEN_PLL_IVA2 */
 #define OMAP3430_IVA2_DPLL_RAMPTIME_SHIFT		8
diff --git a/arch/arm/mach-omap2/gpmc.c b/arch/arm/mach-omap2/gpmc.c
index 02cede2..dbf68dc 100644
--- a/arch/arm/mach-omap2/gpmc.c
+++ b/arch/arm/mach-omap2/gpmc.c
@@ -42,7 +42,7 @@
 #define GPMC_STATUS		0x54
 #define GPMC_PREFETCH_CONFIG1	0x1e0
 #define GPMC_PREFETCH_CONFIG2	0x1e4
-#define GPMC_PREFETCH_CONTROL	0x1e8
+#define GPMC_PREFETCH_CONTROL	0x1ec
 #define GPMC_PREFETCH_STATUS	0x1f0
 #define GPMC_ECC_CONFIG		0x1f4
 #define GPMC_ECC_CONTROL	0x1f8
diff --git a/arch/arm/mach-omap2/mailbox.c b/arch/arm/mach-omap2/mailbox.c
index b03cd06..4799561 100644
--- a/arch/arm/mach-omap2/mailbox.c
+++ b/arch/arm/mach-omap2/mailbox.c
@@ -70,6 +70,9 @@ struct omap_mbox2_priv {
 
 static struct clk *mbox_ick_handle;
 
+static void omap2_mbox_enable_irq(struct omap_mbox *mbox,
+				  omap_mbox_type_t irq);
+
 static inline unsigned int mbox_read_reg(unsigned int reg)
 {
 	return __raw_readl(mbox_base + reg);
@@ -81,7 +84,7 @@ static inline void mbox_write_reg(unsigned int val, unsigned int reg)
 }
 
 /* Mailbox H/W preparations */
-static inline int omap2_mbox_startup(struct omap_mbox *mbox)
+static int omap2_mbox_startup(struct omap_mbox *mbox)
 {
 	unsigned int l;
 
@@ -97,38 +100,40 @@ static inline int omap2_mbox_startup(struct omap_mbox *mbox)
 	l |= 0x00000011;
 	mbox_write_reg(l, MAILBOX_SYSCONFIG);
 
+	omap2_mbox_enable_irq(mbox, IRQ_RX);
+
 	return 0;
 }
 
-static inline void omap2_mbox_shutdown(struct omap_mbox *mbox)
+static void omap2_mbox_shutdown(struct omap_mbox *mbox)
 {
 	clk_disable(mbox_ick_handle);
 	clk_put(mbox_ick_handle);
 }
 
 /* Mailbox FIFO handle functions */
-static inline mbox_msg_t omap2_mbox_fifo_read(struct omap_mbox *mbox)
+static mbox_msg_t omap2_mbox_fifo_read(struct omap_mbox *mbox)
 {
 	struct omap_mbox2_fifo *fifo =
 		&((struct omap_mbox2_priv *)mbox->priv)->rx_fifo;
 	return (mbox_msg_t) mbox_read_reg(fifo->msg);
 }
 
-static inline void omap2_mbox_fifo_write(struct omap_mbox *mbox, mbox_msg_t msg)
+static void omap2_mbox_fifo_write(struct omap_mbox *mbox, mbox_msg_t msg)
 {
 	struct omap_mbox2_fifo *fifo =
 		&((struct omap_mbox2_priv *)mbox->priv)->tx_fifo;
 	mbox_write_reg(msg, fifo->msg);
 }
 
-static inline int omap2_mbox_fifo_empty(struct omap_mbox *mbox)
+static int omap2_mbox_fifo_empty(struct omap_mbox *mbox)
 {
 	struct omap_mbox2_fifo *fifo =
 		&((struct omap_mbox2_priv *)mbox->priv)->rx_fifo;
 	return (mbox_read_reg(fifo->msg_stat) == 0);
 }
 
-static inline int omap2_mbox_fifo_full(struct omap_mbox *mbox)
+static int omap2_mbox_fifo_full(struct omap_mbox *mbox)
 {
 	struct omap_mbox2_fifo *fifo =
 		&((struct omap_mbox2_priv *)mbox->priv)->tx_fifo;
@@ -136,7 +141,7 @@ static inline int omap2_mbox_fifo_full(struct omap_mbox *mbox)
 }
 
 /* Mailbox IRQ handle functions */
-static inline void omap2_mbox_enable_irq(struct omap_mbox *mbox,
+static void omap2_mbox_enable_irq(struct omap_mbox *mbox,
 		omap_mbox_type_t irq)
 {
 	struct omap_mbox2_priv *p = (struct omap_mbox2_priv *)mbox->priv;
@@ -147,7 +152,7 @@ static inline void omap2_mbox_enable_irq(struct omap_mbox *mbox,
 	mbox_write_reg(l, p->irqenable);
 }
 
-static inline void omap2_mbox_disable_irq(struct omap_mbox *mbox,
+static void omap2_mbox_disable_irq(struct omap_mbox *mbox,
 		omap_mbox_type_t irq)
 {
 	struct omap_mbox2_priv *p = (struct omap_mbox2_priv *)mbox->priv;
@@ -158,7 +163,7 @@ static inline void omap2_mbox_disable_irq(struct omap_mbox *mbox,
 	mbox_write_reg(l, p->irqenable);
 }
 
-static inline void omap2_mbox_ack_irq(struct omap_mbox *mbox,
+static void omap2_mbox_ack_irq(struct omap_mbox *mbox,
 		omap_mbox_type_t irq)
 {
 	struct omap_mbox2_priv *p = (struct omap_mbox2_priv *)mbox->priv;
@@ -167,7 +172,7 @@ static inline void omap2_mbox_ack_irq(struct omap_mbox *mbox,
 	mbox_write_reg(bit, p->irqstatus);
 }
 
-static inline int omap2_mbox_is_irq(struct omap_mbox *mbox,
+static int omap2_mbox_is_irq(struct omap_mbox *mbox,
 		omap_mbox_type_t irq)
 {
 	struct omap_mbox2_priv *p = (struct omap_mbox2_priv *)mbox->priv;
diff --git a/arch/arm/mach-omap2/prm.h b/arch/arm/mach-omap2/prm.h
index ab7649af..618f811 100644
--- a/arch/arm/mach-omap2/prm.h
+++ b/arch/arm/mach-omap2/prm.h
@@ -30,7 +30,7 @@
 
 /*
  * Architecture-specific global PRM registers
- * Use prm_{read,write}_reg() with these registers.
+ * Use __raw_{read,write}l() with these registers.
  *
  * With a few exceptions, these are the register names beginning with
  * PRCM_* on 24xx, and PRM_* on 34xx.  (The exceptions are the
diff --git a/arch/arm/mach-orion5x/addr-map.c b/arch/arm/mach-orion5x/addr-map.c
index 9608503..e63fb05 100644
--- a/arch/arm/mach-orion5x/addr-map.c
+++ b/arch/arm/mach-orion5x/addr-map.c
@@ -34,11 +34,7 @@
  * Non-CPU Masters address decoding --
  * Unlike the CPU, we setup the access from Orion's master interfaces to DDR
  * banks only (the typical use case).
- * Setup access for each master to DDR is issued by common.c.
- *
- * Note: although orion_setbits() and orion_clrbits() are not atomic
- * no locking is necessary here since code in this file is only called
- * at boot time when there is no concurrency issues.
+ * Setup access for each master to DDR is issued by platform device setup.
  */
 
 /*
@@ -48,10 +44,6 @@
 #define TARGET_DEV_BUS		1
 #define TARGET_PCI		3
 #define TARGET_PCIE		4
-#define ATTR_DDR_CS(n)		(((n) ==0) ? 0xe :	\
-				((n) == 1) ? 0xd :	\
-				((n) == 2) ? 0xb :	\
-				((n) == 3) ? 0x7 : 0xf)
 #define ATTR_PCIE_MEM		0x59
 #define ATTR_PCIE_IO		0x51
 #define ATTR_PCIE_WA		0x79
@@ -61,17 +53,12 @@
 #define ATTR_DEV_CS1		0x1d
 #define ATTR_DEV_CS2		0x1b
 #define ATTR_DEV_BOOT		0xf
-#define WIN_EN			1
 
 /*
  * Helpers to get DDR bank info
  */
-#define DDR_BASE_CS(n)		ORION5X_DDR_REG(0x1500 + ((n) * 8))
-#define DDR_SIZE_CS(n)		ORION5X_DDR_REG(0x1504 + ((n) * 8))
-#define DDR_MAX_CS		4
-#define DDR_REG_TO_SIZE(reg)	(((reg) | 0xffffff) + 1)
-#define DDR_REG_TO_BASE(reg)	((reg) & 0xff000000)
-#define DDR_BANK_EN		1
+#define DDR_BASE_CS(n)		ORION5X_DDR_REG(0x1500 + ((n) << 3))
+#define DDR_SIZE_CS(n)		ORION5X_DDR_REG(0x1504 + ((n) << 3))
 
 /*
  * CPU Address Decode Windows registers
@@ -81,17 +68,6 @@
 #define CPU_WIN_REMAP_LO(n)	ORION5X_BRIDGE_REG(0x008 | ((n) << 4))
 #define CPU_WIN_REMAP_HI(n)	ORION5X_BRIDGE_REG(0x00c | ((n) << 4))
 
-/*
- * Gigabit Ethernet Address Decode Windows registers
- */
-#define ETH_WIN_BASE(win)	ORION5X_ETH_REG(0x200 + ((win) * 8))
-#define ETH_WIN_SIZE(win)	ORION5X_ETH_REG(0x204 + ((win) * 8))
-#define ETH_WIN_REMAP(win)	ORION5X_ETH_REG(0x280 + ((win) * 4))
-#define ETH_WIN_EN		ORION5X_ETH_REG(0x290)
-#define ETH_WIN_PROT		ORION5X_ETH_REG(0x294)
-#define ETH_MAX_WIN		6
-#define ETH_MAX_REMAP_WIN	4
-
 
 struct mbus_dram_target_info orion5x_mbus_dram_info;
 
@@ -202,39 +178,3 @@ void __init orion5x_setup_pcie_wa_win(u32 base, u32 size)
 {
 	setup_cpu_win(7, base, size, TARGET_PCIE, ATTR_PCIE_WA, -1);
 }
-
-void __init orion5x_setup_eth_wins(void)
-{
-	int i;
-
-	/*
-	 * First, disable and clear windows
-	 */
-	for (i = 0; i < ETH_MAX_WIN; i++) {
-		orion5x_write(ETH_WIN_BASE(i), 0);
-		orion5x_write(ETH_WIN_SIZE(i), 0);
-		orion5x_setbits(ETH_WIN_EN, 1 << i);
-		orion5x_clrbits(ETH_WIN_PROT, 0x3 << (i * 2));
-		if (i < ETH_MAX_REMAP_WIN)
-			orion5x_write(ETH_WIN_REMAP(i), 0);
-	}
-
-	/*
-	 * Setup windows for DDR banks.
-	 */
-	for (i = 0; i < DDR_MAX_CS; i++) {
-		u32 base, size;
-		size = orion5x_read(DDR_SIZE_CS(i));
-		base = orion5x_read(DDR_BASE_CS(i));
-		if (size & DDR_BANK_EN) {
-			base = DDR_REG_TO_BASE(base);
-			size = DDR_REG_TO_SIZE(size);
-			orion5x_write(ETH_WIN_SIZE(i), (size-1) & 0xffff0000);
-			orion5x_write(ETH_WIN_BASE(i), (base & 0xffff0000) |
-					(ATTR_DDR_CS(i) << 8) |
-					TARGET_DDR);
-			orion5x_clrbits(ETH_WIN_EN, 1 << i);
-			orion5x_setbits(ETH_WIN_PROT, 0x3 << (i * 2));
-		}
-	}
-}
diff --git a/arch/arm/mach-orion5x/common.c b/arch/arm/mach-orion5x/common.c
index 968deb5..4f13fd0 100644
--- a/arch/arm/mach-orion5x/common.c
+++ b/arch/arm/mach-orion5x/common.c
@@ -190,6 +190,11 @@ static struct platform_device orion5x_ehci1 = {
  * (The Orion and Discovery (MV643xx) families use the same Ethernet driver)
  ****************************************************************************/
 
+struct mv643xx_eth_shared_platform_data orion5x_eth_shared_data = {
+	.dram		= &orion5x_mbus_dram_info,
+	.t_clk		= ORION5X_TCLK,
+};
+
 static struct resource orion5x_eth_shared_resources[] = {
 	{
 		.start	= ORION5X_ETH_PHYS_BASE + 0x2000,
@@ -201,6 +206,9 @@ static struct resource orion5x_eth_shared_resources[] = {
 static struct platform_device orion5x_eth_shared = {
 	.name		= MV643XX_ETH_SHARED_NAME,
 	.id		= 0,
+	.dev		= {
+		.platform_data	= &orion5x_eth_shared_data,
+	},
 	.num_resources	= 1,
 	.resource	= orion5x_eth_shared_resources,
 };
@@ -223,7 +231,9 @@ static struct platform_device orion5x_eth = {
 
 void __init orion5x_eth_init(struct mv643xx_eth_platform_data *eth_data)
 {
+	eth_data->shared = &orion5x_eth_shared;
 	orion5x_eth.dev.platform_data = eth_data;
+
 	platform_device_register(&orion5x_eth_shared);
 	platform_device_register(&orion5x_eth);
 }
@@ -360,7 +370,6 @@ void __init orion5x_init(void)
 	 * Setup Orion address map
 	 */
 	orion5x_setup_cpu_mbus_bridge();
-	orion5x_setup_eth_wins();
 
 	/*
 	 * Register devices.
diff --git a/arch/arm/mach-orion5x/common.h b/arch/arm/mach-orion5x/common.h
index 14adf8d..bd0f05d 100644
--- a/arch/arm/mach-orion5x/common.h
+++ b/arch/arm/mach-orion5x/common.h
@@ -22,7 +22,6 @@ void orion5x_setup_dev0_win(u32 base, u32 size);
 void orion5x_setup_dev1_win(u32 base, u32 size);
 void orion5x_setup_dev2_win(u32 base, u32 size);
 void orion5x_setup_pcie_wa_win(u32 base, u32 size);
-void orion5x_setup_eth_wins(void);
 
 /*
  * Shared code used internally by other Orion core functions.
diff --git a/arch/arm/mach-orion5x/dns323-setup.c b/arch/arm/mach-orion5x/dns323-setup.c
index f9430f5..27ce967 100644
--- a/arch/arm/mach-orion5x/dns323-setup.c
+++ b/arch/arm/mach-orion5x/dns323-setup.c
@@ -58,7 +58,7 @@ static int __init dns323_pci_map_irq(struct pci_dev *dev, u8 slot, u8 pin)
 }
 
 static struct hw_pci dns323_pci __initdata = {
-	.nr_controllers = 1,
+	.nr_controllers = 2,
 	.swizzle	= pci_std_swizzle,
 	.setup		= orion5x_pci_sys_setup,
 	.scan		= orion5x_pci_sys_scan_bus,
diff --git a/arch/arm/mach-orion5x/kurobox_pro-setup.c b/arch/arm/mach-orion5x/kurobox_pro-setup.c
index 8841086..f5074b8 100644
--- a/arch/arm/mach-orion5x/kurobox_pro-setup.c
+++ b/arch/arm/mach-orion5x/kurobox_pro-setup.c
@@ -138,7 +138,7 @@ static int __init kurobox_pro_pci_map_irq(struct pci_dev *dev, u8 slot, u8 pin)
 }
 
 static struct hw_pci kurobox_pro_pci __initdata = {
-	.nr_controllers	= 1,
+	.nr_controllers	= 2,
 	.swizzle	= pci_std_swizzle,
 	.setup		= orion5x_pci_sys_setup,
 	.scan		= orion5x_pci_sys_scan_bus,
diff --git a/arch/arm/mach-pxa/Makefile b/arch/arm/mach-pxa/Makefile
index 6a83085..0e6d05b 100644
--- a/arch/arm/mach-pxa/Makefile
+++ b/arch/arm/mach-pxa/Makefile
@@ -5,6 +5,13 @@
 # Common support (must be linked before board specific support)
 obj-y				+= clock.o devices.o generic.o irq.o dma.o \
 				   time.o gpio.o
+obj-$(CONFIG_PM)		+= pm.o sleep.o standby.o
+obj-$(CONFIG_CPU_FREQ)		+= cpu-pxa.o
+
+# Generic drivers that other drivers may depend upon
+obj-$(CONFIG_PXA_SSP)		+= ssp.o
+
+# SoC-specific code
 obj-$(CONFIG_PXA25x)		+= mfp-pxa2xx.o pxa25x.o
 obj-$(CONFIG_PXA27x)		+= mfp-pxa2xx.o pxa27x.o
 obj-$(CONFIG_PXA3xx)		+= mfp-pxa3xx.o pxa3xx.o smemc.o
@@ -48,11 +55,6 @@ led-$(CONFIG_MACH_TRIZEPS4)	+= leds-trizeps4.o
 
 obj-$(CONFIG_LEDS)		+= $(led-y)
 
-# Misc features
-obj-$(CONFIG_PM)		+= pm.o sleep.o standby.o
-obj-$(CONFIG_CPU_FREQ)		+= cpu-pxa.o
-obj-$(CONFIG_PXA_SSP)		+= ssp.o
-
 ifeq ($(CONFIG_PCI),y)
 obj-$(CONFIG_MACH_ARMCORE) += cm-x270-pci.o
 endif
diff --git a/arch/arm/mach-pxa/cm-x270.c b/arch/arm/mach-pxa/cm-x270.c
index 6d4416a..f5851d1 100644
--- a/arch/arm/mach-pxa/cm-x270.c
+++ b/arch/arm/mach-pxa/cm-x270.c
@@ -59,7 +59,7 @@ static struct resource cmx270_dm9k_resource[] = {
 	[2] = {
 		.start = CMX270_ETHIRQ,
 		.end   = CMX270_ETHIRQ,
-		.flags = IORESOURCE_IRQ,
+		.flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE,
 	}
 };
 
diff --git a/arch/arm/mach-pxa/colibri.c b/arch/arm/mach-pxa/colibri.c
index 43bf5a1..574839d 100644
--- a/arch/arm/mach-pxa/colibri.c
+++ b/arch/arm/mach-pxa/colibri.c
@@ -98,7 +98,7 @@ static struct resource dm9000_resources[] = {
 	[2] = {
 		.start	= COLIBRI_ETH_IRQ,
 		.end	= COLIBRI_ETH_IRQ,
-		.flags	= IORESOURCE_IRQ,
+		.flags	= IORESOURCE_IRQ | IRQF_TRIGGER_RISING,
 	},
 };
 
@@ -119,7 +119,6 @@ static void __init colibri_init(void)
 	/* DM9000 LAN */
 	pxa_gpio_mode(GPIO78_nCS_2_MD);
 	pxa_gpio_mode(GPIO_DM9000 | GPIO_IN);
-	set_irq_type(COLIBRI_ETH_IRQ, IRQT_FALLING);
 
 	platform_add_devices(colibri_devices, ARRAY_SIZE(colibri_devices));
 }
diff --git a/arch/arm/mach-pxa/corgi.c b/arch/arm/mach-pxa/corgi.c
index 259ca82..b757dd7 100644
--- a/arch/arm/mach-pxa/corgi.c
+++ b/arch/arm/mach-pxa/corgi.c
@@ -493,8 +493,6 @@ static struct platform_device *devices[] __initdata = {
 
 static void corgi_poweroff(void)
 {
-	RCSR = RCSR_HWR | RCSR_WDR | RCSR_SMR | RCSR_GPR;
-
 	if (!machine_is_corgi())
 		/* Green LED off tells the bootloader to halt */
 		reset_scoop_gpio(&corgiscoop_device.dev, CORGI_SCP_LED_GREEN);
@@ -503,8 +501,6 @@ static void corgi_poweroff(void)
 
 static void corgi_restart(char mode)
 {
-	RCSR = RCSR_HWR | RCSR_WDR | RCSR_SMR | RCSR_GPR;
-
 	if (!machine_is_corgi())
 		/* Green LED on tells the bootloader to reboot */
 		set_scoop_gpio(&corgiscoop_device.dev, CORGI_SCP_LED_GREEN);
diff --git a/arch/arm/mach-pxa/cpu-pxa.c b/arch/arm/mach-pxa/cpu-pxa.c
index 4b21479..fb9ba1a 100644
--- a/arch/arm/mach-pxa/cpu-pxa.c
+++ b/arch/arm/mach-pxa/cpu-pxa.c
@@ -49,125 +49,216 @@ MODULE_PARM_DESC(freq_debug, "Set the debug messages to on=1/off=0");
 #define freq_debug  0
 #endif
 
+static unsigned int pxa27x_maxfreq;
+module_param(pxa27x_maxfreq, uint, 0);
+MODULE_PARM_DESC(pxa27x_maxfreq, "Set the pxa27x maxfreq in MHz"
+		 "(typically 624=>pxa270, 416=>pxa271, 520=>pxa272)");
+
 typedef struct {
 	unsigned int khz;
 	unsigned int membus;
 	unsigned int cccr;
 	unsigned int div2;
+	unsigned int cclkcfg;
 } pxa_freqs_t;
 
 /* Define the refresh period in mSec for the SDRAM and the number of rows */
-#define SDRAM_TREF          64      /* standard 64ms SDRAM */
-#define SDRAM_ROWS          4096    /* 64MB=8192 32MB=4096 */
-#define MDREFR_DRI(x)       (((x) * SDRAM_TREF) / (SDRAM_ROWS * 32))
-
-#define CCLKCFG_TURBO       0x1
-#define CCLKCFG_FCS         0x2
-#define PXA25x_MIN_FREQ     99500
-#define PXA25x_MAX_FREQ     398100
-#define MDREFR_DB2_MASK     (MDREFR_K2DB2 | MDREFR_K1DB2)
-#define MDREFR_DRI_MASK     0xFFF
+#define SDRAM_TREF	64	/* standard 64ms SDRAM */
+#define SDRAM_ROWS	4096	/* 64MB=8192 32MB=4096 */
 
+#define CCLKCFG_TURBO		0x1
+#define CCLKCFG_FCS		0x2
+#define CCLKCFG_HALFTURBO	0x4
+#define CCLKCFG_FASTBUS		0x8
+#define MDREFR_DB2_MASK		(MDREFR_K2DB2 | MDREFR_K1DB2)
+#define MDREFR_DRI_MASK		0xFFF
 
+/*
+ * PXA255 definitions
+ */
 /* Use the run mode frequencies for the CPUFREQ_POLICY_PERFORMANCE policy */
+#define CCLKCFG			CCLKCFG_TURBO | CCLKCFG_FCS
+
 static pxa_freqs_t pxa255_run_freqs[] =
 {
-    /* CPU   MEMBUS  CCCR  DIV2*/
-    { 99500,  99500, 0x121, 1}, /* run= 99, turbo= 99, PXbus=50,  SDRAM=50 */
-    {132700, 132700, 0x123, 1}, /* run=133, turbo=133, PXbus=66,  SDRAM=66 */
-    {199100,  99500, 0x141, 0}, /* run=199, turbo=199, PXbus=99,  SDRAM=99 */
-    {265400, 132700, 0x143, 1}, /* run=265, turbo=265, PXbus=133, SDRAM=66 */
-    {331800, 165900, 0x145, 1}, /* run=331, turbo=331, PXbus=166, SDRAM=83 */
-    {398100,  99500, 0x161, 0}, /* run=398, turbo=398, PXbus=196, SDRAM=99 */
-    {0,}
+	/* CPU   MEMBUS  CCCR  DIV2 CCLKCFG	   run  turbo PXbus SDRAM */
+	{ 99500,  99500, 0x121, 1,  CCLKCFG},	/*  99,   99,   50,   50  */
+	{132700, 132700, 0x123, 1,  CCLKCFG},	/* 133,  133,   66,   66  */
+	{199100,  99500, 0x141, 0,  CCLKCFG},	/* 199,  199,   99,   99  */
+	{265400, 132700, 0x143, 1,  CCLKCFG},	/* 265,  265,  133,   66  */
+	{331800, 165900, 0x145, 1,  CCLKCFG},	/* 331,  331,  166,   83  */
+	{398100,  99500, 0x161, 0,  CCLKCFG},	/* 398,  398,  196,   99  */
 };
-#define NUM_RUN_FREQS ARRAY_SIZE(pxa255_run_freqs)
-
-static struct cpufreq_frequency_table pxa255_run_freq_table[NUM_RUN_FREQS+1];
 
 /* Use the turbo mode frequencies for the CPUFREQ_POLICY_POWERSAVE policy */
 static pxa_freqs_t pxa255_turbo_freqs[] =
 {
-    /* CPU   MEMBUS  CCCR  DIV2*/
-    { 99500, 99500,  0x121, 1}, /* run=99,  turbo= 99, PXbus=50, SDRAM=50 */
-    {199100, 99500,  0x221, 0}, /* run=99,  turbo=199, PXbus=50, SDRAM=99 */
-    {298500, 99500,  0x321, 0}, /* run=99,  turbo=287, PXbus=50, SDRAM=99 */
-    {298600, 99500,  0x1c1, 0}, /* run=199, turbo=287, PXbus=99, SDRAM=99 */
-    {398100, 99500,  0x241, 0}, /* run=199, turbo=398, PXbus=99, SDRAM=99 */
-    {0,}
+	/* CPU   MEMBUS  CCCR  DIV2 CCLKCFG	   run  turbo PXbus SDRAM */
+	{ 99500, 99500,  0x121, 1,  CCLKCFG},	/*  99,   99,   50,   50  */
+	{199100, 99500,  0x221, 0,  CCLKCFG},	/*  99,  199,   50,   99  */
+	{298500, 99500,  0x321, 0,  CCLKCFG},	/*  99,  287,   50,   99  */
+	{298600, 99500,  0x1c1, 0,  CCLKCFG},	/* 199,  287,   99,   99  */
+	{398100, 99500,  0x241, 0,  CCLKCFG},	/* 199,  398,   99,   99  */
+};
+
+#define NUM_PXA25x_RUN_FREQS ARRAY_SIZE(pxa255_run_freqs)
+#define NUM_PXA25x_TURBO_FREQS ARRAY_SIZE(pxa255_turbo_freqs)
+
+static struct cpufreq_frequency_table
+	pxa255_run_freq_table[NUM_PXA25x_RUN_FREQS+1];
+static struct cpufreq_frequency_table
+	pxa255_turbo_freq_table[NUM_PXA25x_TURBO_FREQS+1];
+
+/*
+ * PXA270 definitions
+ *
+ * For the PXA27x:
+ * Control variables are A, L, 2N for CCCR; B, HT, T for CLKCFG.
+ *
+ * A = 0 => memory controller clock from table 3-7,
+ * A = 1 => memory controller clock = system bus clock
+ * Run mode frequency	= 13 MHz * L
+ * Turbo mode frequency = 13 MHz * L * N
+ * System bus frequency = 13 MHz * L / (B + 1)
+ *
+ * In CCCR:
+ * A = 1
+ * L = 16	  oscillator to run mode ratio
+ * 2N = 6	  2 * (turbo mode to run mode ratio)
+ *
+ * In CCLKCFG:
+ * B = 1	  Fast bus mode
+ * HT = 0	  Half-Turbo mode
+ * T = 1	  Turbo mode
+ *
+ * For now, just support some of the combinations in table 3-7 of
+ * PXA27x Processor Family Developer's Manual to simplify frequency
+ * change sequences.
+ */
+#define PXA27x_CCCR(A, L, N2) (A << 25 | N2 << 7 | L)
+#define CCLKCFG2(B, HT, T) \
+  (CCLKCFG_FCS | \
+   ((B)  ? CCLKCFG_FASTBUS : 0) | \
+   ((HT) ? CCLKCFG_HALFTURBO : 0) | \
+   ((T)  ? CCLKCFG_TURBO : 0))
+
+static pxa_freqs_t pxa27x_freqs[] = {
+	{104000, 104000, PXA27x_CCCR(1,	 8, 2), 0, CCLKCFG2(1, 0, 1)},
+	{156000, 104000, PXA27x_CCCR(1,	 8, 6), 0, CCLKCFG2(1, 1, 1)},
+	{208000, 208000, PXA27x_CCCR(0, 16, 2), 1, CCLKCFG2(0, 0, 1)},
+	{312000, 208000, PXA27x_CCCR(1, 16, 3), 1, CCLKCFG2(1, 0, 1)},
+	{416000, 208000, PXA27x_CCCR(1, 16, 4), 1, CCLKCFG2(1, 0, 1)},
+	{520000, 208000, PXA27x_CCCR(1, 16, 5), 1, CCLKCFG2(1, 0, 1)},
+	{624000, 208000, PXA27x_CCCR(1, 16, 6), 1, CCLKCFG2(1, 0, 1)}
 };
-#define NUM_TURBO_FREQS ARRAY_SIZE(pxa255_turbo_freqs)
 
-static struct cpufreq_frequency_table pxa255_turbo_freq_table[NUM_TURBO_FREQS+1];
+#define NUM_PXA27x_FREQS ARRAY_SIZE(pxa27x_freqs)
+static struct cpufreq_frequency_table
+	pxa27x_freq_table[NUM_PXA27x_FREQS+1];
 
 extern unsigned get_clk_frequency_khz(int info);
 
+static void find_freq_tables(struct cpufreq_policy *policy,
+			     struct cpufreq_frequency_table **freq_table,
+			     pxa_freqs_t **pxa_freqs)
+{
+	if (cpu_is_pxa25x()) {
+		if (policy->policy == CPUFREQ_POLICY_PERFORMANCE) {
+			*pxa_freqs = pxa255_run_freqs;
+			*freq_table = pxa255_run_freq_table;
+		} else if (policy->policy == CPUFREQ_POLICY_POWERSAVE) {
+			*pxa_freqs = pxa255_turbo_freqs;
+			*freq_table = pxa255_turbo_freq_table;
+		} else {
+			printk("CPU PXA: Unknown policy found. "
+			       "Using CPUFREQ_POLICY_PERFORMANCE\n");
+			*pxa_freqs = pxa255_run_freqs;
+			*freq_table = pxa255_run_freq_table;
+		}
+	}
+	if (cpu_is_pxa27x()) {
+		*pxa_freqs = pxa27x_freqs;
+		*freq_table = pxa27x_freq_table;
+	}
+}
+
+static void pxa27x_guess_max_freq(void)
+{
+	if (!pxa27x_maxfreq) {
+		pxa27x_maxfreq = 416000;
+		printk(KERN_INFO "PXA CPU 27x max frequency not defined "
+		       "(pxa27x_maxfreq), assuming pxa271 with %dkHz maxfreq\n",
+		       pxa27x_maxfreq);
+	} else {
+		pxa27x_maxfreq *= 1000;
+	}
+}
+
+static u32 mdrefr_dri(unsigned int freq)
+{
+	u32 dri = 0;
+
+	if (cpu_is_pxa25x())
+		dri = ((freq * SDRAM_TREF) / (SDRAM_ROWS * 32));
+	if (cpu_is_pxa27x())
+		dri = ((freq * SDRAM_TREF) / (SDRAM_ROWS - 31)) / 32;
+	return dri;
+}
+
 /* find a valid frequency point */
 static int pxa_verify_policy(struct cpufreq_policy *policy)
 {
 	struct cpufreq_frequency_table *pxa_freqs_table;
+	pxa_freqs_t *pxa_freqs;
 	int ret;
 
-	if (policy->policy == CPUFREQ_POLICY_PERFORMANCE) {
-		pxa_freqs_table = pxa255_run_freq_table;
-	} else if (policy->policy == CPUFREQ_POLICY_POWERSAVE) {
-		pxa_freqs_table = pxa255_turbo_freq_table;
-	} else {
-		printk("CPU PXA: Unknown policy found. "
-		       "Using CPUFREQ_POLICY_PERFORMANCE\n");
-		pxa_freqs_table = pxa255_run_freq_table;
-	}
-
+	find_freq_tables(policy, &pxa_freqs_table, &pxa_freqs);
 	ret = cpufreq_frequency_table_verify(policy, pxa_freqs_table);
 
 	if (freq_debug)
 		pr_debug("Verified CPU policy: %dKhz min to %dKhz max\n",
-		       policy->min, policy->max);
+			 policy->min, policy->max);
 
 	return ret;
 }
 
+static unsigned int pxa_cpufreq_get(unsigned int cpu)
+{
+	return get_clk_frequency_khz(0);
+}
+
 static int pxa_set_target(struct cpufreq_policy *policy,
-			   unsigned int target_freq,
-			   unsigned int relation)
+			  unsigned int target_freq,
+			  unsigned int relation)
 {
 	struct cpufreq_frequency_table *pxa_freqs_table;
 	pxa_freqs_t *pxa_freq_settings;
 	struct cpufreq_freqs freqs;
 	unsigned int idx;
 	unsigned long flags;
-	unsigned int unused, preset_mdrefr, postset_mdrefr;
-	void *ramstart = phys_to_virt(0xa0000000);
+	unsigned int new_freq_cpu, new_freq_mem;
+	unsigned int unused, preset_mdrefr, postset_mdrefr, cclkcfg;
 
 	/* Get the current policy */
-	if (policy->policy == CPUFREQ_POLICY_PERFORMANCE) {
-		pxa_freq_settings = pxa255_run_freqs;
-		pxa_freqs_table   = pxa255_run_freq_table;
-	} else if (policy->policy == CPUFREQ_POLICY_POWERSAVE) {
-		pxa_freq_settings = pxa255_turbo_freqs;
-		pxa_freqs_table   = pxa255_turbo_freq_table;
-	} else {
-		printk("CPU PXA: Unknown policy found. "
-		       "Using CPUFREQ_POLICY_PERFORMANCE\n");
-		pxa_freq_settings = pxa255_run_freqs;
-		pxa_freqs_table   = pxa255_run_freq_table;
-	}
+	find_freq_tables(policy, &pxa_freqs_table, &pxa_freq_settings);
 
 	/* Lookup the next frequency */
 	if (cpufreq_frequency_table_target(policy, pxa_freqs_table,
-	                                   target_freq, relation, &idx)) {
+					   target_freq, relation, &idx)) {
 		return -EINVAL;
 	}
 
+	new_freq_cpu = pxa_freq_settings[idx].khz;
+	new_freq_mem = pxa_freq_settings[idx].membus;
 	freqs.old = policy->cur;
-	freqs.new = pxa_freq_settings[idx].khz;
+	freqs.new = new_freq_cpu;
 	freqs.cpu = policy->cpu;
 
 	if (freq_debug)
-		pr_debug(KERN_INFO "Changing CPU frequency to %d Mhz, (SDRAM %d Mhz)\n",
-		       freqs.new / 1000, (pxa_freq_settings[idx].div2) ?
-		       (pxa_freq_settings[idx].membus / 2000) :
-		       (pxa_freq_settings[idx].membus / 1000));
+		pr_debug(KERN_INFO "Changing CPU frequency to %d Mhz, "
+			 "(SDRAM %d Mhz)\n",
+			 freqs.new / 1000, (pxa_freq_settings[idx].div2) ?
+			 (new_freq_mem / 2000) : (new_freq_mem / 1000));
 
 	/*
 	 * Tell everyone what we're about to do...
@@ -177,16 +268,16 @@ static int pxa_set_target(struct cpufreq_policy *policy,
 	cpufreq_notify_transition(&freqs, CPUFREQ_PRECHANGE);
 
 	/* Calculate the next MDREFR.  If we're slowing down the SDRAM clock
-	 * we need to preset the smaller DRI before the change.  If we're speeding
-	 * up we need to set the larger DRI value after the change.
+	 * we need to preset the smaller DRI before the change.	 If we're
+	 * speeding up we need to set the larger DRI value after the change.
 	 */
 	preset_mdrefr = postset_mdrefr = MDREFR;
-	if ((MDREFR & MDREFR_DRI_MASK) > MDREFR_DRI(pxa_freq_settings[idx].membus)) {
-		preset_mdrefr = (preset_mdrefr & ~MDREFR_DRI_MASK) |
-		                MDREFR_DRI(pxa_freq_settings[idx].membus);
+	if ((MDREFR & MDREFR_DRI_MASK) > mdrefr_dri(new_freq_mem)) {
+		preset_mdrefr = (preset_mdrefr & ~MDREFR_DRI_MASK);
+		preset_mdrefr |= mdrefr_dri(new_freq_mem);
 	}
-	postset_mdrefr = (postset_mdrefr & ~MDREFR_DRI_MASK) |
-		            MDREFR_DRI(pxa_freq_settings[idx].membus);
+	postset_mdrefr =
+		(postset_mdrefr & ~MDREFR_DRI_MASK) | mdrefr_dri(new_freq_mem);
 
 	/* If we're dividing the memory clock by two for the SDRAM clock, this
 	 * must be set prior to the change.  Clearing the divide must be done
@@ -201,26 +292,27 @@ static int pxa_set_target(struct cpufreq_policy *policy,
 
 	local_irq_save(flags);
 
-	/* Set new the CCCR */
+	/* Set new the CCCR and prepare CCLKCFG */
 	CCCR = pxa_freq_settings[idx].cccr;
+	cclkcfg = pxa_freq_settings[idx].cclkcfg;
 
 	asm volatile("							\n\
 		ldr	r4, [%1]		/* load MDREFR */	\n\
 		b	2f						\n\
-		.align	5 						\n\
+		.align	5						\n\
 1:									\n\
-		str	%4, [%1]		/* preset the MDREFR */	\n\
+		str	%3, [%1]		/* preset the MDREFR */	\n\
 		mcr	p14, 0, %2, c6, c0, 0	/* set CCLKCFG[FCS] */	\n\
-		str	%5, [%1]		/* postset the MDREFR */ \n\
+		str	%4, [%1]		/* postset the MDREFR */ \n\
 									\n\
 		b	3f						\n\
 2:		b	1b						\n\
 3:		nop							\n\
 	  "
-	  : "=&r" (unused)
-	  : "r" (&MDREFR), "r" (CCLKCFG_TURBO|CCLKCFG_FCS), "r" (ramstart),
-	    "r" (preset_mdrefr), "r" (postset_mdrefr)
-	  : "r4", "r5");
+		     : "=&r" (unused)
+		     : "r" (&MDREFR), "r" (cclkcfg),
+		       "r" (preset_mdrefr), "r" (postset_mdrefr)
+		     : "r4", "r5");
 	local_irq_restore(flags);
 
 	/*
@@ -233,38 +325,57 @@ static int pxa_set_target(struct cpufreq_policy *policy,
 	return 0;
 }
 
-static unsigned int pxa_cpufreq_get(unsigned int cpu)
-{
-	return get_clk_frequency_khz(0);
-}
-
-static int pxa_cpufreq_init(struct cpufreq_policy *policy)
+static __init int pxa_cpufreq_init(struct cpufreq_policy *policy)
 {
 	int i;
+	unsigned int freq;
+
+	/* try to guess pxa27x cpu */
+	if (cpu_is_pxa27x())
+		pxa27x_guess_max_freq();
 
 	/* set default policy and cpuinfo */
 	policy->governor = CPUFREQ_DEFAULT_GOVERNOR;
-	policy->policy = CPUFREQ_POLICY_PERFORMANCE;
-	policy->cpuinfo.max_freq = PXA25x_MAX_FREQ;
-	policy->cpuinfo.min_freq = PXA25x_MIN_FREQ;
+	if (cpu_is_pxa25x())
+		policy->policy = CPUFREQ_POLICY_PERFORMANCE;
 	policy->cpuinfo.transition_latency = 1000; /* FIXME: 1 ms, assumed */
-	policy->cur = get_clk_frequency_khz(0);    /* current freq */
+	policy->cur = get_clk_frequency_khz(0);	   /* current freq */
 	policy->min = policy->max = policy->cur;
 
-	/* Generate the run cpufreq_frequency_table struct */
-	for (i = 0; i < NUM_RUN_FREQS; i++) {
+	/* Generate pxa25x the run cpufreq_frequency_table struct */
+	for (i = 0; i < NUM_PXA25x_RUN_FREQS; i++) {
 		pxa255_run_freq_table[i].frequency = pxa255_run_freqs[i].khz;
 		pxa255_run_freq_table[i].index = i;
 	}
-
 	pxa255_run_freq_table[i].frequency = CPUFREQ_TABLE_END;
-	/* Generate the turbo cpufreq_frequency_table struct */
-	for (i = 0; i < NUM_TURBO_FREQS; i++) {
-		pxa255_turbo_freq_table[i].frequency = pxa255_turbo_freqs[i].khz;
+
+	/* Generate pxa25x the turbo cpufreq_frequency_table struct */
+	for (i = 0; i < NUM_PXA25x_TURBO_FREQS; i++) {
+		pxa255_turbo_freq_table[i].frequency =
+			pxa255_turbo_freqs[i].khz;
 		pxa255_turbo_freq_table[i].index = i;
 	}
 	pxa255_turbo_freq_table[i].frequency = CPUFREQ_TABLE_END;
 
+	/* Generate the pxa27x cpufreq_frequency_table struct */
+	for (i = 0; i < NUM_PXA27x_FREQS; i++) {
+		freq = pxa27x_freqs[i].khz;
+		if (freq > pxa27x_maxfreq)
+			break;
+		pxa27x_freq_table[i].frequency = freq;
+		pxa27x_freq_table[i].index = i;
+	}
+	pxa27x_freq_table[i].frequency = CPUFREQ_TABLE_END;
+
+	/*
+	 * Set the policy's minimum and maximum frequencies from the tables
+	 * just constructed.  This sets cpuinfo.mxx_freq, min and max.
+	 */
+	if (cpu_is_pxa25x())
+		cpufreq_frequency_table_cpuinfo(policy, pxa255_run_freq_table);
+	else if (cpu_is_pxa27x())
+		cpufreq_frequency_table_cpuinfo(policy, pxa27x_freq_table);
+
 	printk(KERN_INFO "PXA CPU frequency change support initialized\n");
 
 	return 0;
@@ -275,26 +386,25 @@ static struct cpufreq_driver pxa_cpufreq_driver = {
 	.target	= pxa_set_target,
 	.init	= pxa_cpufreq_init,
 	.get	= pxa_cpufreq_get,
-	.name	= "PXA25x",
+	.name	= "PXA2xx",
 };
 
 static int __init pxa_cpu_init(void)
 {
 	int ret = -ENODEV;
-	if (cpu_is_pxa25x())
+	if (cpu_is_pxa25x() || cpu_is_pxa27x())
 		ret = cpufreq_register_driver(&pxa_cpufreq_driver);
 	return ret;
 }
 
 static void __exit pxa_cpu_exit(void)
 {
-	if (cpu_is_pxa25x())
-		cpufreq_unregister_driver(&pxa_cpufreq_driver);
+	cpufreq_unregister_driver(&pxa_cpufreq_driver);
 }
 
 
-MODULE_AUTHOR ("Intrinsyc Software Inc.");
-MODULE_DESCRIPTION ("CPU frequency changing driver for the PXA architecture");
+MODULE_AUTHOR("Intrinsyc Software Inc.");
+MODULE_DESCRIPTION("CPU frequency changing driver for the PXA architecture");
 MODULE_LICENSE("GPL");
 module_init(pxa_cpu_init);
 module_exit(pxa_cpu_exit);
diff --git a/arch/arm/mach-pxa/em-x270.c b/arch/arm/mach-pxa/em-x270.c
index edc4f07..9c57700 100644
--- a/arch/arm/mach-pxa/em-x270.c
+++ b/arch/arm/mach-pxa/em-x270.c
@@ -50,7 +50,7 @@ static struct resource em_x270_dm9k_resource[] = {
 	[2] = {
 		.start = EM_X270_ETHIRQ,
 		.end   = EM_X270_ETHIRQ,
-		.flags = IORESOURCE_IRQ,
+		.flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE,
 	}
 };
 
diff --git a/arch/arm/mach-pxa/lubbock.c b/arch/arm/mach-pxa/lubbock.c
index 0993f4d..7b9bdd0 100644
--- a/arch/arm/mach-pxa/lubbock.c
+++ b/arch/arm/mach-pxa/lubbock.c
@@ -396,7 +396,7 @@ static struct pxafb_mach_info sharp_lm8v31 = {
 	.cmap_inverse	= 0,
 	.cmap_static	= 0,
 	.lcd_conn	= LCD_COLOR_DSTN_16BPP | LCD_PCLK_EDGE_FALL |
-			  LCD_AC_BIAS_FREQ(255);
+			  LCD_AC_BIAS_FREQ(255),
 };
 
 #define	MMC_POLL_RATE		msecs_to_jiffies(1000)
diff --git a/arch/arm/mach-pxa/pm.c b/arch/arm/mach-pxa/pm.c
index ec1bbf3..7d4debb 100644
--- a/arch/arm/mach-pxa/pm.c
+++ b/arch/arm/mach-pxa/pm.c
@@ -42,20 +42,17 @@ int pxa_pm_enter(suspend_state_t state)
 	if (state != PM_SUSPEND_STANDBY) {
 		pxa_cpu_pm_fns->save(sleep_save);
 		/* before sleeping, calculate and save a checksum */
-		for (i = 0; i < pxa_cpu_pm_fns->save_size - 1; i++)
+		for (i = 0; i < pxa_cpu_pm_fns->save_count - 1; i++)
 			sleep_save_checksum += sleep_save[i];
 	}
 
-	/* Clear reset status */
-	RCSR = RCSR_HWR | RCSR_WDR | RCSR_SMR | RCSR_GPR;
-
 	/* *** go zzz *** */
 	pxa_cpu_pm_fns->enter(state);
 	cpu_init();
 
 	if (state != PM_SUSPEND_STANDBY) {
 		/* after sleeping, validate the checksum */
-		for (i = 0; i < pxa_cpu_pm_fns->save_size - 1; i++)
+		for (i = 0; i < pxa_cpu_pm_fns->save_count - 1; i++)
 			checksum += sleep_save[i];
 
 		/* if invalid, display message and wait for a hardware reset */
@@ -101,7 +98,8 @@ static int __init pxa_pm_init(void)
 		return -EINVAL;
 	}
 
-	sleep_save = kmalloc(pxa_cpu_pm_fns->save_size, GFP_KERNEL);
+	sleep_save = kmalloc(pxa_cpu_pm_fns->save_count * sizeof(unsigned long),
+			     GFP_KERNEL);
 	if (!sleep_save) {
 		printk(KERN_ERR "failed to alloc memory for pm save\n");
 		return -ENOMEM;
diff --git a/arch/arm/mach-pxa/poodle.c b/arch/arm/mach-pxa/poodle.c
index ca5ac19..0b30f25 100644
--- a/arch/arm/mach-pxa/poodle.c
+++ b/arch/arm/mach-pxa/poodle.c
@@ -326,13 +326,11 @@ static struct platform_device *devices[] __initdata = {
 
 static void poodle_poweroff(void)
 {
-	RCSR = RCSR_HWR | RCSR_WDR | RCSR_SMR | RCSR_GPR;
 	arm_machine_restart('h');
 }
 
 static void poodle_restart(char mode)
 {
-	RCSR = RCSR_HWR | RCSR_WDR | RCSR_SMR | RCSR_GPR;
 	arm_machine_restart('h');
 }
 
diff --git a/arch/arm/mach-pxa/pxa25x.c b/arch/arm/mach-pxa/pxa25x.c
index d9b5450..e5b417d 100644
--- a/arch/arm/mach-pxa/pxa25x.c
+++ b/arch/arm/mach-pxa/pxa25x.c
@@ -150,9 +150,7 @@ static struct clk pxa25x_clks[] = {
  * More ones like CP and general purpose register values are preserved
  * with the stack pointer in sleep.S.
  */
-enum {	SLEEP_SAVE_START = 0,
-
-	SLEEP_SAVE_PGSR0, SLEEP_SAVE_PGSR1, SLEEP_SAVE_PGSR2,
+enum {	SLEEP_SAVE_PGSR0, SLEEP_SAVE_PGSR1, SLEEP_SAVE_PGSR2,
 
 	SLEEP_SAVE_GAFR0_L, SLEEP_SAVE_GAFR0_U,
 	SLEEP_SAVE_GAFR1_L, SLEEP_SAVE_GAFR1_U,
@@ -162,7 +160,7 @@ enum {	SLEEP_SAVE_START = 0,
 
 	SLEEP_SAVE_CKEN,
 
-	SLEEP_SAVE_SIZE
+	SLEEP_SAVE_COUNT
 };
 
 
@@ -200,6 +198,9 @@ static void pxa25x_cpu_pm_restore(unsigned long *sleep_save)
 
 static void pxa25x_cpu_pm_enter(suspend_state_t state)
 {
+	/* Clear reset status */
+	RCSR = RCSR_HWR | RCSR_WDR | RCSR_SMR | RCSR_GPR;
+
 	switch (state) {
 	case PM_SUSPEND_MEM:
 		/* set resume return address */
@@ -210,7 +211,7 @@ static void pxa25x_cpu_pm_enter(suspend_state_t state)
 }
 
 static struct pxa_cpu_pm_fns pxa25x_cpu_pm_fns = {
-	.save_size	= SLEEP_SAVE_SIZE,
+	.save_count	= SLEEP_SAVE_COUNT,
 	.valid		= suspend_valid_only_mem,
 	.save		= pxa25x_cpu_pm_save,
 	.restore	= pxa25x_cpu_pm_restore,
diff --git a/arch/arm/mach-pxa/pxa27x.c b/arch/arm/mach-pxa/pxa27x.c
index 7a2449d..7e94583 100644
--- a/arch/arm/mach-pxa/pxa27x.c
+++ b/arch/arm/mach-pxa/pxa27x.c
@@ -181,9 +181,7 @@ static struct clk pxa27x_clks[] = {
  * More ones like CP and general purpose register values are preserved
  * with the stack pointer in sleep.S.
  */
-enum {	SLEEP_SAVE_START = 0,
-
-	SLEEP_SAVE_PGSR0, SLEEP_SAVE_PGSR1, SLEEP_SAVE_PGSR2, SLEEP_SAVE_PGSR3,
+enum {	SLEEP_SAVE_PGSR0, SLEEP_SAVE_PGSR1, SLEEP_SAVE_PGSR2, SLEEP_SAVE_PGSR3,
 
 	SLEEP_SAVE_GAFR0_L, SLEEP_SAVE_GAFR0_U,
 	SLEEP_SAVE_GAFR1_L, SLEEP_SAVE_GAFR1_U,
@@ -198,7 +196,7 @@ enum {	SLEEP_SAVE_START = 0,
 	SLEEP_SAVE_PWER, SLEEP_SAVE_PCFR, SLEEP_SAVE_PRER,
 	SLEEP_SAVE_PFER, SLEEP_SAVE_PKWR,
 
-	SLEEP_SAVE_SIZE
+	SLEEP_SAVE_COUNT
 };
 
 void pxa27x_cpu_pm_save(unsigned long *sleep_save)
@@ -251,6 +249,9 @@ void pxa27x_cpu_pm_enter(suspend_state_t state)
 	/* Clear edge-detect status register. */
 	PEDR = 0xDF12FE1B;
 
+	/* Clear reset status */
+	RCSR = RCSR_HWR | RCSR_WDR | RCSR_SMR | RCSR_GPR;
+
 	switch (state) {
 	case PM_SUSPEND_STANDBY:
 		pxa_cpu_standby();
@@ -269,7 +270,7 @@ static int pxa27x_cpu_pm_valid(suspend_state_t state)
 }
 
 static struct pxa_cpu_pm_fns pxa27x_cpu_pm_fns = {
-	.save_size	= SLEEP_SAVE_SIZE,
+	.save_count	= SLEEP_SAVE_COUNT,
 	.save		= pxa27x_cpu_pm_save,
 	.restore	= pxa27x_cpu_pm_restore,
 	.valid		= pxa27x_cpu_pm_valid,
diff --git a/arch/arm/mach-pxa/pxa3xx.c b/arch/arm/mach-pxa/pxa3xx.c
index b6a6f5f..644550b 100644
--- a/arch/arm/mach-pxa/pxa3xx.c
+++ b/arch/arm/mach-pxa/pxa3xx.c
@@ -256,12 +256,11 @@ static unsigned long wakeup_src;
 #define SAVE(x)		sleep_save[SLEEP_SAVE_##x] = x
 #define RESTORE(x)	x = sleep_save[SLEEP_SAVE_##x]
 
-enum {	SLEEP_SAVE_START = 0,
-	SLEEP_SAVE_CKENA,
+enum {	SLEEP_SAVE_CKENA,
 	SLEEP_SAVE_CKENB,
 	SLEEP_SAVE_ACCR,
 
-	SLEEP_SAVE_SIZE,
+	SLEEP_SAVE_COUNT,
 };
 
 static void pxa3xx_cpu_pm_save(unsigned long *sleep_save)
@@ -376,7 +375,7 @@ static int pxa3xx_cpu_pm_valid(suspend_state_t state)
 }
 
 static struct pxa_cpu_pm_fns pxa3xx_cpu_pm_fns = {
-	.save_size	= SLEEP_SAVE_SIZE,
+	.save_count	= SLEEP_SAVE_COUNT,
 	.save		= pxa3xx_cpu_pm_save,
 	.restore	= pxa3xx_cpu_pm_restore,
 	.valid		= pxa3xx_cpu_pm_valid,
diff --git a/arch/arm/mach-pxa/spitz.c b/arch/arm/mach-pxa/spitz.c
index 62a02c3..e7d0fcd 100644
--- a/arch/arm/mach-pxa/spitz.c
+++ b/arch/arm/mach-pxa/spitz.c
@@ -529,8 +529,6 @@ static struct platform_device *devices[] __initdata = {
 
 static void spitz_poweroff(void)
 {
-	RCSR = RCSR_HWR | RCSR_WDR | RCSR_SMR | RCSR_GPR;
-
 	pxa_gpio_mode(SPITZ_GPIO_ON_RESET | GPIO_OUT);
 	GPSR(SPITZ_GPIO_ON_RESET) = GPIO_bit(SPITZ_GPIO_ON_RESET);
 
diff --git a/arch/arm/mach-pxa/spitz_pm.c b/arch/arm/mach-pxa/spitz_pm.c
index 7a7f5f9..23f050f 100644
--- a/arch/arm/mach-pxa/spitz_pm.c
+++ b/arch/arm/mach-pxa/spitz_pm.c
@@ -119,9 +119,6 @@ static void spitz_presuspend(void)
 	/* nRESET_OUT Disable */
 	PSLR |= PSLR_SL_ROD;
 
-	/* Clear reset status */
-	RCSR = RCSR_HWR | RCSR_WDR | RCSR_SMR | RCSR_GPR;
-
 	/* Stop 3.6MHz and drive HIGH to PCMCIA and CS */
 	PCFR = PCFR_GPR_EN | PCFR_OPDE;
 }
diff --git a/arch/arm/mach-pxa/ssp.c b/arch/arm/mach-pxa/ssp.c
index 00af7f2..0bb3198 100644
--- a/arch/arm/mach-pxa/ssp.c
+++ b/arch/arm/mach-pxa/ssp.c
@@ -330,7 +330,7 @@ struct ssp_device *ssp_request(int port, const char *label)
 
 	mutex_unlock(&ssp_lock);
 
-	if (ssp->port_id != port)
+	if (&ssp->node == &ssp_list)
 		return NULL;
 
 	return ssp;
diff --git a/arch/arm/mach-pxa/tosa.c b/arch/arm/mach-pxa/tosa.c
index 6458f6d..ab4a9f5 100644
--- a/arch/arm/mach-pxa/tosa.c
+++ b/arch/arm/mach-pxa/tosa.c
@@ -467,10 +467,8 @@ static struct platform_device *devices[] __initdata = {
 
 static void tosa_poweroff(void)
 {
-	RCSR = RCSR_HWR | RCSR_WDR | RCSR_SMR | RCSR_GPR;
-
-	pxa_gpio_mode(TOSA_GPIO_ON_RESET | GPIO_OUT);
-	GPSR(TOSA_GPIO_ON_RESET) = GPIO_bit(TOSA_GPIO_ON_RESET);
+	gpio_direction_output(TOSA_GPIO_ON_RESET, 0);
+	gpio_set_value(TOSA_GPIO_ON_RESET, 1);
 
 	mdelay(1000);
 	arm_machine_restart('h');
diff --git a/arch/arm/mach-realview/platsmp.c b/arch/arm/mach-realview/platsmp.c
index 3e57428..8e813ed 100644
--- a/arch/arm/mach-realview/platsmp.c
+++ b/arch/arm/mach-realview/platsmp.c
@@ -74,6 +74,8 @@ static DEFINE_SPINLOCK(boot_lock);
 
 void __cpuinit platform_secondary_init(unsigned int cpu)
 {
+	trace_hardirqs_off();
+
 	/*
 	 * the primary core may have used a "cross call" soft interrupt
 	 * to get this processor out of WFI in the BootMonitor - make
diff --git a/arch/arm/mach-s3c2410/mach-bast.c b/arch/arm/mach-s3c2410/mach-bast.c
index 661a235..27f63d5 100644
--- a/arch/arm/mach-s3c2410/mach-bast.c
+++ b/arch/arm/mach-s3c2410/mach-bast.c
@@ -374,7 +374,7 @@ static struct resource bast_dm9k_resource[] = {
 	[2] = {
 		.start = IRQ_DM9000,
 		.end   = IRQ_DM9000,
-		.flags = IORESOURCE_IRQ,
+		.flags = IORESOURCE_IRQ | IRQF_TRIGGER_HIGH,
 	}
 
 };
diff --git a/arch/arm/mach-s3c2410/mach-vr1000.c b/arch/arm/mach-s3c2410/mach-vr1000.c
index c564233..4c4b5c4 100644
--- a/arch/arm/mach-s3c2410/mach-vr1000.c
+++ b/arch/arm/mach-s3c2410/mach-vr1000.c
@@ -263,7 +263,7 @@ static struct resource vr1000_dm9k0_resource[] = {
 	[2] = {
 		.start = IRQ_VR1000_DM9000A,
 		.end   = IRQ_VR1000_DM9000A,
-		.flags = IORESOURCE_IRQ
+		.flags = IORESOURCE_IRQ | IRQF_TRIGGER_HIGH,
 	}
 
 };
@@ -282,7 +282,7 @@ static struct resource vr1000_dm9k1_resource[] = {
 	[2] = {
 		.start = IRQ_VR1000_DM9000N,
 		.end   = IRQ_VR1000_DM9000N,
-		.flags = IORESOURCE_IRQ
+		.flags = IORESOURCE_IRQ | IRQF_TRIGGER_HIGH,
 	}
 };
 
diff --git a/arch/arm/mach-sa1100/collie.c b/arch/arm/mach-sa1100/collie.c
index 6496eb6..2f772a3 100644
--- a/arch/arm/mach-sa1100/collie.c
+++ b/arch/arm/mach-sa1100/collie.c
@@ -225,26 +225,28 @@ static void __init collie_init(void)
 	int ret = 0;
 
 	/* cpu initialize */
-	GAFR = ( GPIO_SSP_TXD | \
-		 GPIO_SSP_SCLK | GPIO_SSP_SFRM | GPIO_SSP_CLK | GPIO_TIC_ACK | \
-		 GPIO_32_768kHz );
-
-	GPDR = ( GPIO_LDD8 | GPIO_LDD9 | GPIO_LDD10 | GPIO_LDD11 | GPIO_LDD12 | \
-		 GPIO_LDD13 | GPIO_LDD14 | GPIO_LDD15 | GPIO_SSP_TXD | \
-		 GPIO_SSP_SCLK | GPIO_SSP_SFRM | GPIO_SDLC_SCLK | \
-		 GPIO_SDLC_AAF | GPIO_UART_SCLK1 | GPIO_32_768kHz );
-	GPLR = GPIO_GPIO18;
-
-	// PPC pin setting
-	PPDR = ( PPC_LDD0 | PPC_LDD1 | PPC_LDD2 | PPC_LDD3 | PPC_LDD4 | PPC_LDD5 | \
-		 PPC_LDD6 | PPC_LDD7 | PPC_L_PCLK | PPC_L_LCLK | PPC_L_FCLK | PPC_L_BIAS | \
-	 	 PPC_TXD1 | PPC_TXD2 | PPC_RXD2 | PPC_TXD3 | PPC_TXD4 | PPC_SCLK | PPC_SFRM );
-
-	PSDR = ( PPC_RXD1 | PPC_RXD2 | PPC_RXD3 | PPC_RXD4 );
-
-	GAFR |= GPIO_32_768kHz;
-	GPDR |= GPIO_32_768kHz;
-	TUCR  = TUCR_32_768kHz;
+	GAFR = GPIO_SSP_TXD | GPIO_SSP_SCLK | GPIO_SSP_SFRM | GPIO_SSP_CLK |
+		GPIO_MCP_CLK | GPIO_32_768kHz;
+
+	GPDR = GPIO_LDD8 | GPIO_LDD9 | GPIO_LDD10 | GPIO_LDD11 | GPIO_LDD12 |
+		GPIO_LDD13 | GPIO_LDD14 | GPIO_LDD15 | GPIO_SSP_TXD |
+		GPIO_SSP_SCLK | GPIO_SSP_SFRM | GPIO_SDLC_SCLK |
+		COLLIE_GPIO_UCB1x00_RESET | COLLIE_GPIO_nMIC_ON |
+		COLLIE_GPIO_nREMOCON_ON | GPIO_32_768kHz;
+
+	PPDR = PPC_LDD0 | PPC_LDD1 | PPC_LDD2 | PPC_LDD3 | PPC_LDD4 | PPC_LDD5 |
+		PPC_LDD6 | PPC_LDD7 | PPC_L_PCLK | PPC_L_LCLK | PPC_L_FCLK | PPC_L_BIAS |
+		PPC_TXD1 | PPC_TXD2 | PPC_TXD3 | PPC_TXD4 | PPC_SCLK | PPC_SFRM;
+
+	PWER = COLLIE_GPIO_AC_IN | COLLIE_GPIO_CO | COLLIE_GPIO_ON_KEY |
+		COLLIE_GPIO_WAKEUP | COLLIE_GPIO_nREMOCON_INT | PWER_RTC;
+
+	PGSR = COLLIE_GPIO_nREMOCON_ON;
+
+	PSDR = PPC_RXD1 | PPC_RXD2 | PPC_RXD3 | PPC_RXD4;
+
+	PCFR = PCFR_OPDE;
+
 
 	platform_scoop_config = &collie_pcmcia_config;
 
diff --git a/arch/arm/mach-sa1100/pm.c b/arch/arm/mach-sa1100/pm.c
index 246c573..1693d44 100644
--- a/arch/arm/mach-sa1100/pm.c
+++ b/arch/arm/mach-sa1100/pm.c
@@ -43,20 +43,18 @@ extern void sa1100_cpu_resume(void);
  * More ones like CP and general purpose register values are preserved
  * on the stack and then the stack pointer is stored last in sleep.S.
  */
-enum {	SLEEP_SAVE_SP = 0,
-
-	SLEEP_SAVE_GPDR, SLEEP_SAVE_GAFR,
+enum {	SLEEP_SAVE_GPDR, SLEEP_SAVE_GAFR,
 	SLEEP_SAVE_PPDR, SLEEP_SAVE_PPSR, SLEEP_SAVE_PPAR, SLEEP_SAVE_PSDR,
 
 	SLEEP_SAVE_Ser1SDCR0,
 
-	SLEEP_SAVE_SIZE
+	SLEEP_SAVE_COUNT
 };
 
 
 static int sa11x0_pm_enter(suspend_state_t state)
 {
-	unsigned long gpio, sleep_save[SLEEP_SAVE_SIZE];
+	unsigned long gpio, sleep_save[SLEEP_SAVE_COUNT];
 
 	gpio = GPLR;
 
diff --git a/arch/arm/mm/proc-arm925.S b/arch/arm/mm/proc-arm925.S
index 065087a..d045812 100644
--- a/arch/arm/mm/proc-arm925.S
+++ b/arch/arm/mm/proc-arm925.S
@@ -332,7 +332,7 @@ ENTRY(arm925_dma_flush_range)
 #ifndef CONFIG_CPU_DCACHE_WRITETHROUGH
 	mcr	p15, 0, r0, c7, c14, 1		@ clean+invalidate D entry
 #else
-	mcr	p15, 0, r0, c7, c10, 1		@ clean D entry
+	mcr	p15, 0, r0, c7, c6, 1		@ invalidate D entry
 #endif
 	add	r0, r0, #CACHE_DLINESIZE
 	cmp	r0, r1
diff --git a/arch/arm/mm/proc-arm926.S b/arch/arm/mm/proc-arm926.S
index 997db84..4cd3316 100644
--- a/arch/arm/mm/proc-arm926.S
+++ b/arch/arm/mm/proc-arm926.S
@@ -295,7 +295,7 @@ ENTRY(arm926_dma_flush_range)
 #ifndef CONFIG_CPU_DCACHE_WRITETHROUGH
 	mcr	p15, 0, r0, c7, c14, 1		@ clean+invalidate D entry
 #else
-	mcr	p15, 0, r0, c7, c10, 1		@ clean D entry
+	mcr	p15, 0, r0, c7, c6, 1		@ invalidate D entry
 #endif
 	add	r0, r0, #CACHE_DLINESIZE
 	cmp	r0, r1
diff --git a/arch/arm/mm/proc-arm940.S b/arch/arm/mm/proc-arm940.S
index 44ead90..1a3d63d 100644
--- a/arch/arm/mm/proc-arm940.S
+++ b/arch/arm/mm/proc-arm940.S
@@ -222,7 +222,7 @@ ENTRY(arm940_dma_flush_range)
 #ifndef CONFIG_CPU_DCACHE_WRITETHROUGH
 	mcr	p15, 0, r3, c7, c14, 2		@ clean/flush D entry
 #else
-	mcr	p15, 0, r3, c7, c10, 2		@ clean D entry
+	mcr	p15, 0, r3, c7, c6, 2		@ invalidate D entry
 #endif
 	subs	r3, r3, #1 << 26
 	bcs	2b				@ entries 63 to 0
diff --git a/arch/arm/mm/proc-arm946.S b/arch/arm/mm/proc-arm946.S
index 2218b0c..82d579a 100644
--- a/arch/arm/mm/proc-arm946.S
+++ b/arch/arm/mm/proc-arm946.S
@@ -265,7 +265,7 @@ ENTRY(arm946_dma_flush_range)
 #ifndef CONFIG_CPU_DCACHE_WRITETHROUGH
 	mcr	p15, 0, r0, c7, c14, 1		@ clean+invalidate D entry
 #else
-	mcr	p15, 0, r0, c7, c10, 1		@ clean D entry
+	mcr	p15, 0, r0, c7, c6, 1		@ invalidate D entry
 #endif
 	add	r0, r0, #CACHE_DLINESIZE
 	cmp	r0, r1
diff --git a/arch/arm/plat-omap/clock.c b/arch/arm/plat-omap/clock.c
index 72d34a2..2db5580 100644
--- a/arch/arm/plat-omap/clock.c
+++ b/arch/arm/plat-omap/clock.c
@@ -21,6 +21,7 @@
 #include <linux/clk.h>
 #include <linux/mutex.h>
 #include <linux/platform_device.h>
+#include <linux/cpufreq.h>
 
 #include <asm/io.h>
 
@@ -134,9 +135,17 @@ void clk_disable(struct clk *clk)
 		return;
 
 	spin_lock_irqsave(&clockfw_lock, flags);
-	BUG_ON(clk->usecount == 0);
+	if (clk->usecount == 0) {
+		printk(KERN_ERR "Trying disable clock %s with 0 usecount\n",
+		       clk->name);
+		WARN_ON(1);
+		goto out;
+	}
+
 	if (arch_clock->clk_disable)
 		arch_clock->clk_disable(clk);
+
+out:
 	spin_unlock_irqrestore(&clockfw_lock, flags);
 }
 EXPORT_SYMBOL(clk_disable);
diff --git a/arch/arm/plat-omap/dma.c b/arch/arm/plat-omap/dma.c
index 79374068..39c637b 100644
--- a/arch/arm/plat-omap/dma.c
+++ b/arch/arm/plat-omap/dma.c
@@ -501,8 +501,6 @@ static inline void omap_enable_channel_irq(int lch)
 
 	/* Enable some nice interrupts. */
 	OMAP_DMA_CICR_REG(lch) = dma_chan[lch].enabled_irqs;
-
-	dma_chan[lch].flags |= OMAP_DMA_ACTIVE;
 }
 
 static void omap_disable_channel_irq(int lch)
@@ -604,6 +602,7 @@ int omap_request_dma(int dev_id, const char *dev_name,
 	chan->data = data;
 #ifndef CONFIG_ARCH_OMAP1
 	chan->chain_id = -1;
+	chan->next_linked_ch = -1;
 #endif
 	chan->enabled_irqs = OMAP_DMA_DROP_IRQ | OMAP_DMA_BLOCK_IRQ;
 
@@ -1087,7 +1086,6 @@ int omap_request_dma_chain(int dev_id, const char *dev_name,
 			printk(KERN_ERR "omap_dma: Request failed %d\n", err);
 			return err;
 		}
-		dma_chan[channels[i]].next_linked_ch = -1;
 		dma_chan[channels[i]].prev_linked_ch = -1;
 		dma_chan[channels[i]].state = DMA_CH_NOTSTARTED;
 
diff --git a/arch/arm/plat-omap/mailbox.c b/arch/arm/plat-omap/mailbox.c
index 1945ddf..6f33f58 100644
--- a/arch/arm/plat-omap/mailbox.c
+++ b/arch/arm/plat-omap/mailbox.c
@@ -355,7 +355,6 @@ static int omap_mbox_init(struct omap_mbox *mbox)
 			"failed to register mailbox interrupt:%d\n", ret);
 		goto fail_request_irq;
 	}
-	enable_mbox_irq(mbox, IRQ_RX);
 
 	mq = mbox_queue_alloc(mbox, mbox_txq_fn, mbox_tx_work);
 	if (!mq) {
diff --git a/arch/arm/plat-s3c24xx/clock.c b/arch/arm/plat-s3c24xx/clock.c
index d84167f..3ac8d8d 100644
--- a/arch/arm/plat-s3c24xx/clock.c
+++ b/arch/arm/plat-s3c24xx/clock.c
@@ -411,7 +411,7 @@ static int s3c24xx_clkout_setparent(struct clk *clk, struct clk *parent)
 
 	clk->parent = parent;
 
-	if (clk == &s3c24xx_dclk0)
+	if (clk == &s3c24xx_clkout0)
 		mask = S3C2410_MISCCR_CLK0_MASK;
 	else {
 		source <<= 4;
@@ -437,7 +437,7 @@ struct clk s3c24xx_dclk0 = {
 struct clk s3c24xx_dclk1 = {
 	.name		= "dclk1",
 	.id		= -1,
-	.ctrlbit	= S3C2410_DCLKCON_DCLK0EN,
+	.ctrlbit	= S3C2410_DCLKCON_DCLK1EN,
 	.enable		= s3c24xx_dclk_enable,
 	.set_parent	= s3c24xx_dclk_setparent,
 	.set_rate	= s3c24xx_set_dclk_rate,
diff --git a/arch/arm/plat-s3c24xx/s3c244x.c b/arch/arm/plat-s3c24xx/s3c244x.c
index f197bb3..2f01af5 100644
--- a/arch/arm/plat-s3c24xx/s3c244x.c
+++ b/arch/arm/plat-s3c24xx/s3c244x.c
@@ -65,6 +65,7 @@ void __init s3c244x_map_io(struct map_desc *mach_desc, int size)
 
 	/* rename any peripherals used differing from the s3c2410 */
 
+	s3c_device_sdi.name  = "s3c2440-sdi";
 	s3c_device_i2c.name  = "s3c2440-i2c";
 	s3c_device_nand.name = "s3c2440-nand";
 	s3c_device_usbgadget.name = "s3c2440-usbgadget";