USB: Add EHCI support for MX27 and MX31 based boards

The Freescale MX27 and MX31 SoCs have a EHCI controller onboard.
The controller is capable of USB on the go. This patch adds
a driver to support all three of them.

Users have to pass details about serial interface configuration in the
platform data.

The USB OTG core used here is the ARC core, so the driver should
be renamed and probably be merged with ehci-fsl.c eventually.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Signed-off-by: Daniel Mack <daniel@caiaq.de>
Cc: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

3 files changed, 130 insertions, 0 deletions

diff --git a/arch/arm/plat-mxc/Makefile b/arch/arm/plat-mxc/Makefile
index 4cbca9d..996cbac 100644
--- a/arch/arm/plat-mxc/Makefile
+++ b/arch/arm/plat-mxc/Makefile
@@ -9,6 +9,7 @@ obj-$(CONFIG_ARCH_MX1) += iomux-mx1-mx2.o dma-mx1-mx2.o
 obj-$(CONFIG_ARCH_MX2) += iomux-mx1-mx2.o dma-mx1-mx2.o
 obj-$(CONFIG_ARCH_MXC_IOMUX_V3) += iomux-v3.o
 obj-$(CONFIG_MXC_PWM)  += pwm.o
+obj-$(CONFIG_USB_EHCI_MXC) += ehci.o
 obj-$(CONFIG_MXC_ULPI) += ulpi.o
 obj-$(CONFIG_ARCH_MXC_AUDMUX_V1) += audmux-v1.o
 obj-$(CONFIG_ARCH_MXC_AUDMUX_V2) += audmux-v2.o
diff --git a/arch/arm/plat-mxc/ehci.c b/arch/arm/plat-mxc/ehci.c
new file mode 100644
index 0000000..41599be
--- /dev/null
+++ b/arch/arm/plat-mxc/ehci.c
@@ -0,0 +1,92 @@
+/*
+ * Copyright (c) 2009 Daniel Mack <daniel@caiaq.de>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY
+ * or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
+ * for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software Foundation,
+ * Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#include <linux/platform_device.h>
+#include <linux/io.h>
+
+#include <mach/hardware.h>
+#include <mach/mxc_ehci.h>
+
+#define USBCTRL_OTGBASE_OFFSET	0x600
+
+#define MX31_OTG_SIC_SHIFT	29
+#define MX31_OTG_SIC_MASK	(0xf << MX31_OTG_SIC_SHIFT)
+#define MX31_OTG_PM_BIT		(1 << 24)
+
+#define MX31_H2_SIC_SHIFT	21
+#define MX31_H2_SIC_MASK	(0xf << MX31_H2_SIC_SHIFT)
+#define MX31_H2_PM_BIT		(1 << 16)
+#define MX31_H2_DT_BIT		(1 << 5)
+
+#define MX31_H1_SIC_SHIFT	13
+#define MX31_H1_SIC_MASK	(0xf << MX31_H1_SIC_SHIFT)
+#define MX31_H1_PM_BIT		(1 << 8)
+#define MX31_H1_DT_BIT		(1 << 4)
+
+int mxc_set_usbcontrol(int port, unsigned int flags)
+{
+	unsigned int v;
+
+	if (cpu_is_mx31()) {
+		v = readl(IO_ADDRESS(MX31_OTG_BASE_ADDR +
+				     USBCTRL_OTGBASE_OFFSET));
+
+		switch (port) {
+		case 0:	/* OTG port */
+			v &= ~(MX31_OTG_SIC_MASK | MX31_OTG_PM_BIT);
+			v |= (flags & MXC_EHCI_INTERFACE_MASK)
+					<< MX31_OTG_SIC_SHIFT;
+			if (flags & MXC_EHCI_POWER_PINS_ENABLED)
+				v |= MX31_OTG_PM_BIT;
+
+			break;
+		case 1: /* H1 port */
+			v &= ~(MX31_H1_SIC_MASK | MX31_H1_PM_BIT);
+			v |= (flags & MXC_EHCI_INTERFACE_MASK)
+						<< MX31_H1_SIC_SHIFT;
+			if (flags & MXC_EHCI_POWER_PINS_ENABLED)
+				v |= MX31_H1_PM_BIT;
+
+			if (!(flags & MXC_EHCI_TTL_ENABLED))
+				v |= MX31_H1_DT_BIT;
+
+			break;
+		case 2:	/* H2 port */
+			v &= ~(MX31_H2_SIC_MASK | MX31_H2_PM_BIT);
+			v |= (flags & MXC_EHCI_INTERFACE_MASK)
+						<< MX31_H2_SIC_SHIFT;
+			if (!(flags & MXC_EHCI_POWER_PINS_ENABLED))
+				v |= MX31_H2_PM_BIT;
+
+			if (!(flags & MXC_EHCI_TTL_ENABLED))
+				v |= MX31_H2_DT_BIT;
+
+			break;
+		}
+
+		writel(v, IO_ADDRESS(MX31_OTG_BASE_ADDR +
+				     USBCTRL_OTGBASE_OFFSET));
+		return 0;
+	}
+
+	printk(KERN_WARNING
+		"%s() unable to setup USBCONTROL for this CPU\n", __func__);
+	return -EINVAL;
+}
+EXPORT_SYMBOL(mxc_set_usbcontrol);
+
diff --git a/arch/arm/plat-mxc/include/mach/mxc_ehci.h b/arch/arm/plat-mxc/include/mach/mxc_ehci.h
new file mode 100644
index 0000000..8f79623
--- /dev/null
+++ b/arch/arm/plat-mxc/include/mach/mxc_ehci.h
@@ -0,0 +1,37 @@
+#ifndef __INCLUDE_ASM_ARCH_MXC_EHCI_H
+#define __INCLUDE_ASM_ARCH_MXC_EHCI_H
+
+/* values for portsc field */
+#define MXC_EHCI_PHY_LOW_POWER_SUSPEND	(1 << 23)
+#define MXC_EHCI_FORCE_FS		(1 << 24)
+#define MXC_EHCI_UTMI_8BIT		(0 << 28)
+#define MXC_EHCI_UTMI_16BIT		(1 << 28)
+#define MXC_EHCI_SERIAL			(1 << 29)
+#define MXC_EHCI_MODE_UTMI		(0 << 30)
+#define MXC_EHCI_MODE_PHILIPS		(1 << 30)
+#define MXC_EHCI_MODE_ULPI		(2 << 30)
+#define MXC_EHCI_MODE_SERIAL		(3 << 30)
+
+/* values for flags field */
+#define MXC_EHCI_INTERFACE_DIFF_UNI	(0 << 0)
+#define MXC_EHCI_INTERFACE_DIFF_BI	(1 << 0)
+#define MXC_EHCI_INTERFACE_SINGLE_UNI	(2 << 0)
+#define MXC_EHCI_INTERFACE_SINGLE_BI	(3 << 0)
+#define MXC_EHCI_INTERFACE_MASK		(0xf)
+
+#define MXC_EHCI_POWER_PINS_ENABLED	(1 << 5)
+#define MXC_EHCI_TTL_ENABLED		(1 << 6)
+
+struct mxc_usbh_platform_data {
+	int (*init)(struct platform_device *pdev);
+	int (*exit)(struct platform_device *pdev);
+
+	unsigned int		 portsc;
+	unsigned int		 flags;
+	struct otg_transceiver	*otg;
+};
+
+int mxc_set_usbcontrol(int port, unsigned int flags);
+
+#endif /* __INCLUDE_ASM_ARCH_MXC_EHCI_H */
+