[ARM] mv78xx0: wire up ethernet error interrupt

Wire up the ethernet port's error interrupt so that the
mv643xx_eth driver can sleep for SMI event completion instead of
having to busy-wait for it.

Signed-off-by: Lennert Buytenhek <buytenh@marvell.com>
Signed-off-by: Nicolas Pitre <nico@marvell.com>

5 files changed, 28 insertions, 7 deletions

diff --git a/arch/arm/mach-mv78xx0/common.c b/arch/arm/mach-mv78xx0/common.c
index 953a26c..d56a05e 100644
--- a/arch/arm/mach-mv78xx0/common.c
+++ b/arch/arm/mach-mv78xx0/common.c
@@ -285,6 +285,11 @@ static struct resource mv78xx0_ge00_shared_resources[] = {
 		.start	= GE00_PHYS_BASE + 0x2000,
 		.end	= GE00_PHYS_BASE + 0x3fff,
 		.flags	= IORESOURCE_MEM,
+	}, {
+		.name	= "ge err irq",
+		.start	= IRQ_MV78XX0_GE_ERR,
+		.end	= IRQ_MV78XX0_GE_ERR,
+		.flags	= IORESOURCE_IRQ,
 	},
 };
 
@@ -294,7 +299,7 @@ static struct platform_device mv78xx0_ge00_shared = {
 	.dev		= {
 		.platform_data	= &mv78xx0_ge00_shared_data,
 	},
-	.num_resources	= 1,
+	.num_resources	= ARRAY_SIZE(mv78xx0_ge00_shared_resources),
 	.resource	= mv78xx0_ge00_shared_resources,
 };
 
diff --git a/arch/arm/mach-mv78xx0/include/mach/entry-macro.S b/arch/arm/mach-mv78xx0/include/mach/entry-macro.S
index ed4a46b..fbfb269 100644
--- a/arch/arm/mach-mv78xx0/include/mach/entry-macro.S
+++ b/arch/arm/mach-mv78xx0/include/mach/entry-macro.S
@@ -26,14 +26,22 @@
 	ldr	\tmp, [\base, #IRQ_MASK_LOW_OFF]
 	mov	\irqnr, #31
 	ands	\irqstat, \irqstat, \tmp
+	bne	1001f
 
 	@ if no low interrupts set, check high interrupts
-	ldreq	\irqstat, [\base, #IRQ_CAUSE_HIGH_OFF]
-	ldreq	\tmp, [\base, #IRQ_MASK_HIGH_OFF]
-	moveq	\irqnr, #63
-	andeqs	\irqstat, \irqstat, \tmp
+	ldr	\irqstat, [\base, #IRQ_CAUSE_HIGH_OFF]
+	ldr	\tmp, [\base, #IRQ_MASK_HIGH_OFF]
+	mov	\irqnr, #63
+	ands	\irqstat, \irqstat, \tmp
+	bne	1001f
+
+	@ if no high interrupts set, check error interrupts
+	ldr	\irqstat, [\base, #IRQ_CAUSE_ERR_OFF]
+	ldr	\tmp, [\base, #IRQ_MASK_ERR_OFF]
+	mov	\irqnr, #95
+	ands	\irqstat, \irqstat, \tmp
 
 	@ find first active interrupt source
-	clzne	\irqstat, \irqstat
+1001:	clzne	\irqstat, \irqstat
 	subne	\irqnr, \irqnr, \irqstat
 	.endm
diff --git a/arch/arm/mach-mv78xx0/include/mach/irqs.h b/arch/arm/mach-mv78xx0/include/mach/irqs.h
index 995d7fb..bebc330 100644
--- a/arch/arm/mach-mv78xx0/include/mach/irqs.h
+++ b/arch/arm/mach-mv78xx0/include/mach/irqs.h
@@ -80,9 +80,14 @@
 #define IRQ_MV78XX0_DB_OUT	61
 
 /*
+ * MV78xx0 Error Interrupt Controller
+ */
+#define IRQ_MV78XX0_GE_ERR	70
+
+/*
  * MV78XX0 General Purpose Pins
  */
-#define IRQ_MV78XX0_GPIO_START	64
+#define IRQ_MV78XX0_GPIO_START	96
 #define NR_GPIO_IRQS		GPIO_MAX
 
 #define NR_IRQS			(IRQ_MV78XX0_GPIO_START + NR_GPIO_IRQS)
diff --git a/arch/arm/mach-mv78xx0/include/mach/mv78xx0.h b/arch/arm/mach-mv78xx0/include/mach/mv78xx0.h
index ad66417..ee9c559 100644
--- a/arch/arm/mach-mv78xx0/include/mach/mv78xx0.h
+++ b/arch/arm/mach-mv78xx0/include/mach/mv78xx0.h
@@ -71,8 +71,10 @@
 #define   BRIDGE_INT_TIMER1	0x0004
 #define   BRIDGE_INT_TIMER1_CLR	(~0x0004)
 #define  IRQ_VIRT_BASE		(BRIDGE_VIRT_BASE | 0x0200)
+#define   IRQ_CAUSE_ERR_OFF	0x0000
 #define   IRQ_CAUSE_LOW_OFF	0x0004
 #define   IRQ_CAUSE_HIGH_OFF	0x0008
+#define   IRQ_MASK_ERR_OFF	0x000c
 #define   IRQ_MASK_LOW_OFF	0x0010
 #define   IRQ_MASK_HIGH_OFF	0x0014
 #define  TIMER_VIRT_BASE	(BRIDGE_VIRT_BASE | 0x0300)
diff --git a/arch/arm/mach-mv78xx0/irq.c b/arch/arm/mach-mv78xx0/irq.c
index 28248d3..503e5d1 100644
--- a/arch/arm/mach-mv78xx0/irq.c
+++ b/arch/arm/mach-mv78xx0/irq.c
@@ -19,4 +19,5 @@ void __init mv78xx0_init_irq(void)
 {
 	orion_irq_init(0, (void __iomem *)(IRQ_VIRT_BASE + IRQ_MASK_LOW_OFF));
 	orion_irq_init(32, (void __iomem *)(IRQ_VIRT_BASE + IRQ_MASK_HIGH_OFF));
+	orion_irq_init(64, (void __iomem *)(IRQ_VIRT_BASE + IRQ_MASK_ERR_OFF));
 }