Merge branch 'for-linus' of git://git.linaro.org/people/rmk/linux-arm

Pull ARM updates from Russell King: "Included in this series are: 1. BE8 (modern big endian) changes for ARM from Ben Dooks 2. big.Little support from Nicolas Pitre and Dave Martin 3. support for LPAE systems with all system memory above 4GB 4. Perf updates from Will Deacon 5. Additional prefetching and other performance improvements from Will. 6. Neon-optimised AES implementation fro Ard. 7. A number of smaller fixes scattered around the place. There is a rather horrid merge conflict in tools/perf - I was never notified of the conflict because it originally occurred between Will's tree and other stuff. Consequently I have a resolution which Will forwarded me, which I'll forward on immediately after sending this mail. The other notable thing is I'm expecting some build breakage in the crypto stuff on ARM only with Ard's AES patches. These were merged into a stable git branch which others had already pulled, so there's little I can do about this. The problem is caused because these patches have a dependency on some code in the crypto git tree - I tried requesting a branch I can pull to resolve these, and all I got each time from the crypto people was "we'll revert our patches then" which would only make things worse since I still don't have the dependent patches. I've no idea what's going on there or how to resolve that, and since I can't split these patches from the rest of this pull request, I'm rather stuck with pushing this as-is or reverting Ard's patches. Since it should "come out in the wash" I've left them in - the only build problems they seem to cause at the moment are with randconfigs, and since it's a new feature anyway. However, if by -rc1 the dependencies aren't in, I think it'd be best to revert Ard's patches" I resolved the perf conflict roughly as per the patch sent by Russell, but there may be some differences. Any errors are likely mine. Let's see how the crypto issues work out.. * 'for-linus' of git://git.linaro.org/people/rmk/linux-arm: (110 commits) ARM: 7868/1: arm/arm64: remove atomic_clear_mask() in "include/asm/atomic.h" ARM: 7867/1: include: asm: use 'int' instead of 'unsigned long' for 'oldval' in atomic_cmpxchg(). ARM: 7866/1: include: asm: use 'long long' instead of 'u64' within atomic.h ARM: 7871/1: amba: Extend number of IRQS ARM: 7887/1: Don't smp_cross_call() on UP devices in arch_irq_work_raise() ARM: 7872/1: Support arch_irq_work_raise() via self IPIs ARM: 7880/1: Clear the IT state independent of the Thumb-2 mode ARM: 7878/1: nommu: Implement dummy early_paging_init() ARM: 7876/1: clear Thumb-2 IT state on exception handling ARM: 7874/2: bL_switcher: Remove cpu_hotplug_driver_{lock,unlock}() ARM: footbridge: fix build warnings for netwinder ARM: 7873/1: vfp: clear vfp_current_hw_state for dying cpu ARM: fix misplaced arch_virt_to_idmap() ARM: 7848/1: mcpm: Implement cpu_kill() to synchronise on powerdown ARM: 7847/1: mcpm: Factor out logical-to-physical CPU translation ARM: 7869/1: remove unused XSCALE_PMU Kconfig param ARM: 7864/1: Handle 64-bit memory in case of 32-bit phys_addr_t ARM: 7863/1: Let arm_add_memory() always use 64-bit arguments ARM: 7862/1: pcpu: replace __get_cpu_var_uses ARM: 7861/1: cacheflush: consolidate single-CPU ARMv7 cache disabling code ...
author: Linus Torvalds <torvalds@linux-foundation.org> 2013-11-14 08:51:29 +0900
committer: Linus Torvalds <torvalds@linux-foundation.org> 2013-11-14 08:51:29 +0900
commit: f47671e2d861a2093179cd64dda22016664b2015 (patch)
tree: f77cb8e7d875f442e2cf0bdc8fbe478ec8ff8181 /arch/arm
parent: 8ceafbfa91ffbdbb2afaea5c24ccb519ffb8b587 (diff)
parent: 42cbe8271ca6562b4ad4b2e6a9895084b16eef5e (diff)
download: op-kernel-dev-f47671e2d861a2093179cd64dda22016664b2015.zip
op-kernel-dev-f47671e2d861a2093179cd64dda22016664b2015.tar.gz
100 files changed, 7617 insertions, 547 deletions
diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index acb8070..603d661 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -5,6 +5,7 @@ config ARM
 	select ARCH_HAS_ATOMIC64_DEC_IF_POSITIVE
 	select ARCH_HAS_TICK_BROADCAST if GENERIC_CLOCKEVENTS_BROADCAST
 	select ARCH_HAVE_CUSTOM_GPIO_H
+	select ARCH_USE_CMPXCHG_LOCKREF
 	select ARCH_WANT_IPC_PARSE_VERSION
 	select BUILDTIME_EXTABLE_SORT if MMU
 	select CLONE_BACKWARDS
@@ -51,6 +52,8 @@ config ARM
 	select HAVE_MOD_ARCH_SPECIFIC if ARM_UNWIND
 	select HAVE_OPROFILE if (HAVE_PERF_EVENTS)
 	select HAVE_PERF_EVENTS
+	select HAVE_PERF_REGS
+	select HAVE_PERF_USER_STACK_DUMP
 	select HAVE_REGS_AND_STACK_ACCESS_API
 	select HAVE_SYSCALL_TRACEPOINTS
 	select HAVE_UID16
@@ -481,6 +484,7 @@ config ARCH_IXP4XX
 	bool "IXP4xx-based"
 	depends on MMU
 	select ARCH_HAS_DMA_SET_COHERENT_MASK
+	select ARCH_SUPPORTS_BIG_ENDIAN
 	select ARCH_REQUIRE_GPIOLIB
 	select CLKSRC_MMIO
 	select CPU_XSCALE
@@ -688,7 +692,6 @@ config ARCH_SA1100
 	select GENERIC_CLOCKEVENTS
 	select HAVE_IDE
 	select ISA
-	select NEED_MACH_GPIO_H
 	select NEED_MACH_MEMORY_H
 	select SPARSE_IRQ
 	help
@@ -1064,11 +1067,6 @@ config IWMMXT
 	  Enable support for iWMMXt context switching at run time if
 	  running on a CPU that supports it.
 
-config XSCALE_PMU
-	bool
-	depends on CPU_XSCALE
-	default y
-
 config MULTI_IRQ_HANDLER
 	bool
 	help
@@ -1516,6 +1514,32 @@ config MCPM
 	  for (multi-)cluster based systems, such as big.LITTLE based
 	  systems.
 
+config BIG_LITTLE
+	bool "big.LITTLE support (Experimental)"
+	depends on CPU_V7 && SMP
+	select MCPM
+	help
+	  This option enables support selections for the big.LITTLE
+	  system architecture.
+
+config BL_SWITCHER
+	bool "big.LITTLE switcher support"
+	depends on BIG_LITTLE && MCPM && HOTPLUG_CPU
+	select CPU_PM
+	select ARM_CPU_SUSPEND
+	help
+	  The big.LITTLE "switcher" provides the core functionality to
+	  transparently handle transition between a cluster of A15's
+	  and a cluster of A7's in a big.LITTLE system.
+
+config BL_SWITCHER_DUMMY_IF
+	tristate "Simple big.LITTLE switcher user interface"
+	depends on BL_SWITCHER && DEBUG_KERNEL
+	help
+	  This is a simple and dummy char dev interface to control
+	  the big.LITTLE switcher core code.  It is meant for
+	  debugging purposes only.
+
 choice
 	prompt "Memory split"
 	default VMSPLIT_3G
diff --git a/arch/arm/Kconfig.debug b/arch/arm/Kconfig.debug
index d597c6b..5765abf 100644
--- a/arch/arm/Kconfig.debug
+++ b/arch/arm/Kconfig.debug
@@ -318,6 +318,7 @@ choice
 	config DEBUG_MSM_UART1
 		bool "Kernel low-level debugging messages via MSM UART1"
 		depends on ARCH_MSM7X00A || ARCH_MSM7X30 || ARCH_QSD8X50
+		select DEBUG_MSM_UART
 		help
 		  Say Y here if you want the debug print routines to direct
 		  their output to the first serial port on MSM devices.
@@ -325,6 +326,7 @@ choice
 	config DEBUG_MSM_UART2
 		bool "Kernel low-level debugging messages via MSM UART2"
 		depends on ARCH_MSM7X00A || ARCH_MSM7X30 || ARCH_QSD8X50
+		select DEBUG_MSM_UART
 		help
 		  Say Y here if you want the debug print routines to direct
 		  their output to the second serial port on MSM devices.
@@ -332,6 +334,7 @@ choice
 	config DEBUG_MSM_UART3
 		bool "Kernel low-level debugging messages via MSM UART3"
 		depends on ARCH_MSM7X00A || ARCH_MSM7X30 || ARCH_QSD8X50
+		select DEBUG_MSM_UART
 		help
 		  Say Y here if you want the debug print routines to direct
 		  their output to the third serial port on MSM devices.
@@ -340,6 +343,7 @@ choice
 		bool "Kernel low-level debugging messages via MSM 8660 UART"
 		depends on ARCH_MSM8X60
 		select MSM_HAS_DEBUG_UART_HS
+		select DEBUG_MSM_UART
 		help
 		  Say Y here if you want the debug print routines to direct
 		  their output to the serial port on MSM 8660 devices.
@@ -348,10 +352,20 @@ choice
 		bool "Kernel low-level debugging messages via MSM 8960 UART"
 		depends on ARCH_MSM8960
 		select MSM_HAS_DEBUG_UART_HS
+		select DEBUG_MSM_UART
 		help
 		  Say Y here if you want the debug print routines to direct
 		  their output to the serial port on MSM 8960 devices.
 
+	config DEBUG_MSM8974_UART
+		bool "Kernel low-level debugging messages via MSM 8974 UART"
+		depends on ARCH_MSM8974
+		select MSM_HAS_DEBUG_UART_HS
+		select DEBUG_MSM_UART
+		help
+		  Say Y here if you want the debug print routines to direct
+		  their output to the serial port on MSM 8974 devices.
+
 	config DEBUG_MVEBU_UART
 		bool "Kernel low-level debugging messages via MVEBU UART (old bootloaders)"
 		depends on ARCH_MVEBU
@@ -841,6 +855,20 @@ choice
 		  options; the platform specific options are deprecated
 		  and will be soon removed.
 
+	config DEBUG_LL_UART_EFM32
+		bool "Kernel low-level debugging via efm32 UART"
+		depends on ARCH_EFM32
+		help
+		  Say Y here if you want the debug print routines to direct
+		  their output to an UART or USART port on efm32 based
+		  machines. Use the following addresses for DEBUG_UART_PHYS:
+
+		    0x4000c000 | USART0
+		    0x4000c400 | USART1
+		    0x4000c800 | USART2
+		    0x4000e000 | UART0
+		    0x4000e400 | UART1
+
 	config DEBUG_LL_UART_PL01X
 		bool "Kernel low-level debugging via ARM Ltd PL01x Primecell UART"
 		help
@@ -887,11 +915,16 @@ config DEBUG_STI_UART
 	bool
 	depends on ARCH_STI
 
+config DEBUG_MSM_UART
+	bool
+	depends on ARCH_MSM
+
 config DEBUG_LL_INCLUDE
 	string
 	default "debug/8250.S" if DEBUG_LL_UART_8250 || DEBUG_UART_8250
 	default "debug/pl01x.S" if DEBUG_LL_UART_PL01X || DEBUG_UART_PL01X
 	default "debug/exynos.S" if DEBUG_EXYNOS_UART
+	default "debug/efm32.S" if DEBUG_LL_UART_EFM32
 	default "debug/icedcc.S" if DEBUG_ICEDCC
 	default "debug/imx.S" if DEBUG_IMX1_UART || \
 				 DEBUG_IMX25_UART || \
@@ -902,11 +935,7 @@ config DEBUG_LL_INCLUDE
 				 DEBUG_IMX53_UART ||\
 				 DEBUG_IMX6Q_UART || \
 				 DEBUG_IMX6SL_UART
-	default "debug/msm.S" if DEBUG_MSM_UART1 || \
-				 DEBUG_MSM_UART2 || \
-				 DEBUG_MSM_UART3 || \
-				 DEBUG_MSM8660_UART || \
-				 DEBUG_MSM8960_UART
+	default "debug/msm.S" if DEBUG_MSM_UART
 	default "debug/omap2plus.S" if DEBUG_OMAP2PLUS_UART
 	default "debug/sirf.S" if DEBUG_SIRFPRIMA2_UART1 || DEBUG_SIRFMARCO_UART1
 	default "debug/sti.S" if DEBUG_STI_UART
@@ -959,6 +988,7 @@ config DEBUG_UART_PHYS
 	default 0x20064000 if DEBUG_RK29_UART1 || DEBUG_RK3X_UART2
 	default 0x20068000 if DEBUG_RK29_UART2 || DEBUG_RK3X_UART3
 	default 0x20201000 if DEBUG_BCM2835
+	default 0x4000e400 if DEBUG_LL_UART_EFM32
 	default 0x40090000 if ARCH_LPC32XX
 	default 0x40100000 if DEBUG_PXA_UART1
 	default 0x42000000 if ARCH_GEMINI
@@ -989,6 +1019,7 @@ config DEBUG_UART_PHYS
 	default 0xfff36000 if DEBUG_HIGHBANK_UART
 	default 0xfffff700 if ARCH_IOP33X
 	depends on DEBUG_LL_UART_8250 || DEBUG_LL_UART_PL01X || \
+		DEBUG_LL_UART_EFM32 || \
 		DEBUG_UART_8250 || DEBUG_UART_PL01X
 
 config DEBUG_UART_VIRT
diff --git a/arch/arm/Makefile b/arch/arm/Makefile
index 8b66713..c99b108 100644
--- a/arch/arm/Makefile
+++ b/arch/arm/Makefile
@@ -16,6 +16,7 @@ LDFLAGS		:=
 LDFLAGS_vmlinux	:=-p --no-undefined -X
 ifeq ($(CONFIG_CPU_ENDIAN_BE8),y)
 LDFLAGS_vmlinux	+= --be8
+LDFLAGS_MODULE	+= --be8
 endif
 
 OBJCOPYFLAGS	:=-O binary -R .comment -S
diff --git a/arch/arm/boot/compressed/head.S b/arch/arm/boot/compressed/head.S
index 75189f1..066b034 100644
--- a/arch/arm/boot/compressed/head.S
+++ b/arch/arm/boot/compressed/head.S
@@ -135,6 +135,7 @@ start:
 		.word	_edata			@ zImage end address
  THUMB(		.thumb			)
 1:
+ ARM_BE8(	setend	be )			@ go BE8 if compiled for BE8
 		mrs	r9, cpsr
 #ifdef CONFIG_ARM_VIRT_EXT
 		bl	__hyp_stub_install	@ get into SVC mode, reversibly
@@ -699,9 +700,7 @@ __armv4_mmu_cache_on:
 		mrc	p15, 0, r0, c1, c0, 0	@ read control reg
 		orr	r0, r0, #0x5000		@ I-cache enable, RR cache replacement
 		orr	r0, r0, #0x0030
-#ifdef CONFIG_CPU_ENDIAN_BE8
-		orr	r0, r0, #1 << 25	@ big-endian page tables
-#endif
+ ARM_BE8(	orr	r0, r0, #1 << 25 )	@ big-endian page tables
 		bl	__common_mmu_cache_on
 		mov	r0, #0
 		mcr	p15, 0, r0, c8, c7, 0	@ flush I,D TLBs
@@ -728,9 +727,7 @@ __armv7_mmu_cache_on:
 		orr	r0, r0, #1 << 22	@ U (v6 unaligned access model)
 						@ (needed for ARM1176)
 #ifdef CONFIG_MMU
-#ifdef CONFIG_CPU_ENDIAN_BE8
-		orr	r0, r0, #1 << 25	@ big-endian page tables
-#endif
+ ARM_BE8(	orr	r0, r0, #1 << 25 )	@ big-endian page tables
 		mrcne   p15, 0, r6, c2, c0, 2   @ read ttb control reg
 		orrne	r0, r0, #1		@ MMU enabled
 		movne	r1, #0xfffffffd		@ domain 0 = client
diff --git a/arch/arm/common/Makefile b/arch/arm/common/Makefile
index eaa9cf4..4bdc416 100644
--- a/arch/arm/common/Makefile
+++ b/arch/arm/common/Makefile
@@ -16,3 +16,5 @@ obj-$(CONFIG_MCPM)		+= mcpm_head.o mcpm_entry.o mcpm_platsmp.o vlock.o
 AFLAGS_mcpm_head.o		:= -march=armv7-a
 AFLAGS_vlock.o			:= -march=armv7-a
 obj-$(CONFIG_TI_PRIV_EDMA)	+= edma.o
+obj-$(CONFIG_BL_SWITCHER)	+= bL_switcher.o
+obj-$(CONFIG_BL_SWITCHER_DUMMY_IF) += bL_switcher_dummy_if.o
diff --git a/arch/arm/common/bL_switcher.c b/arch/arm/common/bL_switcher.c
new file mode 100644
index 0000000..5774b6e
--- /dev/null
+++ b/arch/arm/common/bL_switcher.c
@@ -0,0 +1,822 @@
+/*
+ * arch/arm/common/bL_switcher.c -- big.LITTLE cluster switcher core driver
+ *
+ * Created by:	Nicolas Pitre, March 2012
+ * Copyright:	(C) 2012-2013  Linaro Limited
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/atomic.h>
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/sched.h>
+#include <linux/interrupt.h>
+#include <linux/cpu_pm.h>
+#include <linux/cpu.h>
+#include <linux/cpumask.h>
+#include <linux/kthread.h>
+#include <linux/wait.h>
+#include <linux/time.h>
+#include <linux/clockchips.h>
+#include <linux/hrtimer.h>
+#include <linux/tick.h>
+#include <linux/notifier.h>
+#include <linux/mm.h>
+#include <linux/mutex.h>
+#include <linux/smp.h>
+#include <linux/spinlock.h>
+#include <linux/string.h>
+#include <linux/sysfs.h>
+#include <linux/irqchip/arm-gic.h>
+#include <linux/moduleparam.h>
+
+#include <asm/smp_plat.h>
+#include <asm/cputype.h>
+#include <asm/suspend.h>
+#include <asm/mcpm.h>
+#include <asm/bL_switcher.h>
+
+#define CREATE_TRACE_POINTS
+#include <trace/events/power_cpu_migrate.h>
+
+
+/*
+ * Use our own MPIDR accessors as the generic ones in asm/cputype.h have
+ * __attribute_const__ and we don't want the compiler to assume any
+ * constness here as the value _does_ change along some code paths.
+ */
+
+static int read_mpidr(void)
+{
+	unsigned int id;
+	asm volatile ("mrc p15, 0, %0, c0, c0, 5" : "=r" (id));
+	return id & MPIDR_HWID_BITMASK;
+}
+
+/*
+ * Get a global nanosecond time stamp for tracing.
+ */
+static s64 get_ns(void)
+{
+	struct timespec ts;
+	getnstimeofday(&ts);
+	return timespec_to_ns(&ts);
+}
+
+/*
+ * bL switcher core code.
+ */
+
+static void bL_do_switch(void *_arg)
+{
+	unsigned ib_mpidr, ib_cpu, ib_cluster;
+	long volatile handshake, **handshake_ptr = _arg;
+
+	pr_debug("%s\n", __func__);
+
+	ib_mpidr = cpu_logical_map(smp_processor_id());
+	ib_cpu = MPIDR_AFFINITY_LEVEL(ib_mpidr, 0);
+	ib_cluster = MPIDR_AFFINITY_LEVEL(ib_mpidr, 1);
+
+	/* Advertise our handshake location */
+	if (handshake_ptr) {
+		handshake = 0;
+		*handshake_ptr = &handshake;
+	} else
+		handshake = -1;
+
+	/*
+	 * Our state has been saved at this point.  Let's release our
+	 * inbound CPU.
+	 */
+	mcpm_set_entry_vector(ib_cpu, ib_cluster, cpu_resume);
+	sev();
+
+	/*
+	 * From this point, we must assume that our counterpart CPU might
+	 * have taken over in its parallel world already, as if execution
+	 * just returned from cpu_suspend().  It is therefore important to
+	 * be very careful not to make any change the other guy is not
+	 * expecting.  This is why we need stack isolation.
+	 *
+	 * Fancy under cover tasks could be performed here.  For now
+	 * we have none.
+	 */
+
+	/*
+	 * Let's wait until our inbound is alive.
+	 */
+	while (!handshake) {
+		wfe();
+		smp_mb();
+	}
+
+	/* Let's put ourself down. */
+	mcpm_cpu_power_down();
+
+	/* should never get here */
+	BUG();
+}
+
+/*
+ * Stack isolation.  To ensure 'current' remains valid, we just use another
+ * piece of our thread's stack space which should be fairly lightly used.
+ * The selected area starts just above the thread_info structure located
+ * at the very bottom of the stack, aligned to a cache line, and indexed
+ * with the cluster number.
+ */
+#define STACK_SIZE 512
+extern void call_with_stack(void (*fn)(void *), void *arg, void *sp);
+static int bL_switchpoint(unsigned long _arg)
+{
+	unsigned int mpidr = read_mpidr();
+	unsigned int clusterid = MPIDR_AFFINITY_LEVEL(mpidr, 1);
+	void *stack = current_thread_info() + 1;
+	stack = PTR_ALIGN(stack, L1_CACHE_BYTES);
+	stack += clusterid * STACK_SIZE + STACK_SIZE;
+	call_with_stack(bL_do_switch, (void *)_arg, stack);
+	BUG();
+}
+
+/*
+ * Generic switcher interface
+ */
+
+static unsigned int bL_gic_id[MAX_CPUS_PER_CLUSTER][MAX_NR_CLUSTERS];
+static int bL_switcher_cpu_pairing[NR_CPUS];
+
+/*
+ * bL_switch_to - Switch to a specific cluster for the current CPU
+ * @new_cluster_id: the ID of the cluster to switch to.
+ *
+ * This function must be called on the CPU to be switched.
+ * Returns 0 on success, else a negative status code.
+ */
+static int bL_switch_to(unsigned int new_cluster_id)
+{
+	unsigned int mpidr, this_cpu, that_cpu;
+	unsigned int ob_mpidr, ob_cpu, ob_cluster, ib_mpidr, ib_cpu, ib_cluster;
+	struct completion inbound_alive;
+	struct tick_device *tdev;
+	enum clock_event_mode tdev_mode;
+	long volatile *handshake_ptr;
+	int ipi_nr, ret;
+
+	this_cpu = smp_processor_id();
+	ob_mpidr = read_mpidr();
+	ob_cpu = MPIDR_AFFINITY_LEVEL(ob_mpidr, 0);
+	ob_cluster = MPIDR_AFFINITY_LEVEL(ob_mpidr, 1);
+	BUG_ON(cpu_logical_map(this_cpu) != ob_mpidr);
+
+	if (new_cluster_id == ob_cluster)
+		return 0;
+
+	that_cpu = bL_switcher_cpu_pairing[this_cpu];
+	ib_mpidr = cpu_logical_map(that_cpu);
+	ib_cpu = MPIDR_AFFINITY_LEVEL(ib_mpidr, 0);
+	ib_cluster = MPIDR_AFFINITY_LEVEL(ib_mpidr, 1);
+
+	pr_debug("before switch: CPU %d MPIDR %#x -> %#x\n",
+		 this_cpu, ob_mpidr, ib_mpidr);
+
+	this_cpu = smp_processor_id();
+
+	/* Close the gate for our entry vectors */
+	mcpm_set_entry_vector(ob_cpu, ob_cluster, NULL);
+	mcpm_set_entry_vector(ib_cpu, ib_cluster, NULL);
+
+	/* Install our "inbound alive" notifier. */
+	init_completion(&inbound_alive);
+	ipi_nr = register_ipi_completion(&inbound_alive, this_cpu);
+	ipi_nr |= ((1 << 16) << bL_gic_id[ob_cpu][ob_cluster]);
+	mcpm_set_early_poke(ib_cpu, ib_cluster, gic_get_sgir_physaddr(), ipi_nr);
+
+	/*
+	 * Let's wake up the inbound CPU now in case it requires some delay
+	 * to come online, but leave it gated in our entry vector code.
+	 */
+	ret = mcpm_cpu_power_up(ib_cpu, ib_cluster);
+	if (ret) {
+		pr_err("%s: mcpm_cpu_power_up() returned %d\n", __func__, ret);
+		return ret;
+	}
+
+	/*
+	 * Raise a SGI on the inbound CPU to make sure it doesn't stall
+	 * in a possible WFI, such as in bL_power_down().
+	 */
+	gic_send_sgi(bL_gic_id[ib_cpu][ib_cluster], 0);
+
+	/*
+	 * Wait for the inbound to come up.  This allows for other
+	 * tasks to be scheduled in the mean time.
+	 */
+	wait_for_completion(&inbound_alive);
+	mcpm_set_early_poke(ib_cpu, ib_cluster, 0, 0);
+
+	/*
+	 * From this point we are entering the switch critical zone
+	 * and can't take any interrupts anymore.
+	 */
+	local_irq_disable();
+	local_fiq_disable();
+	trace_cpu_migrate_begin(get_ns(), ob_mpidr);
+
+	/* redirect GIC's SGIs to our counterpart */
+	gic_migrate_target(bL_gic_id[ib_cpu][ib_cluster]);
+
+	tdev = tick_get_device(this_cpu);
+	if (tdev && !cpumask_equal(tdev->evtdev->cpumask, cpumask_of(this_cpu)))
+		tdev = NULL;
+	if (tdev) {
+		tdev_mode = tdev->evtdev->mode;
+		clockevents_set_mode(tdev->evtdev, CLOCK_EVT_MODE_SHUTDOWN);
+	}
+
+	ret = cpu_pm_enter();
+
+	/* we can not tolerate errors at this point */
+	if (ret)
+		panic("%s: cpu_pm_enter() returned %d\n", __func__, ret);
+
+	/* Swap the physical CPUs in the logical map for this logical CPU. */
+	cpu_logical_map(this_cpu) = ib_mpidr;
+	cpu_logical_map(that_cpu) = ob_mpidr;
+
+	/* Let's do the actual CPU switch. */
+	ret = cpu_suspend((unsigned long)&handshake_ptr, bL_switchpoint);
+	if (ret > 0)
+		panic("%s: cpu_suspend() returned %d\n", __func__, ret);
+
+	/* We are executing on the inbound CPU at this point */
+	mpidr = read_mpidr();
+	pr_debug("after switch: CPU %d MPIDR %#x\n", this_cpu, mpidr);
+	BUG_ON(mpidr != ib_mpidr);
+
+	mcpm_cpu_powered_up();
+
+	ret = cpu_pm_exit();
+
+	if (tdev) {
+		clockevents_set_mode(tdev->evtdev, tdev_mode);
+		clockevents_program_event(tdev->evtdev,
+					  tdev->evtdev->next_event, 1);
+	}
+
+	trace_cpu_migrate_finish(get_ns(), ib_mpidr);
+	local_fiq_enable();
+	local_irq_enable();
+
+	*handshake_ptr = 1;
+	dsb_sev();
+
+	if (ret)
+		pr_err("%s exiting with error %d\n", __func__, ret);
+	return ret;
+}
+
+struct bL_thread {
+	spinlock_t lock;
+	struct task_struct *task;
+	wait_queue_head_t wq;
+	int wanted_cluster;
+	struct completion started;
+	bL_switch_completion_handler completer;
+	void *completer_cookie;
+};
+
+static struct bL_thread bL_threads[NR_CPUS];
+
+static int bL_switcher_thread(void *arg)
+{
+	struct bL_thread *t = arg;
+	struct sched_param param = { .sched_priority = 1 };
+	int cluster;
+	bL_switch_completion_handler completer;
+	void *completer_cookie;
+
+	sched_setscheduler_nocheck(current, SCHED_FIFO, &param);
+	complete(&t->started);
+
+	do {
+		if (signal_pending(current))
+			flush_signals(current);
+		wait_event_interruptible(t->wq,
+				t->wanted_cluster != -1 ||
+				kthread_should_stop());
+
+		spin_lock(&t->lock);
+		cluster = t->wanted_cluster;
+		completer = t->completer;
+		completer_cookie = t->completer_cookie;
+		t->wanted_cluster = -1;
+		t->completer = NULL;
+		spin_unlock(&t->lock);
+
+		if (cluster != -1) {
+			bL_switch_to(cluster);
+
+			if (completer)
+				completer(completer_cookie);
+		}
+	} while (!kthread_should_stop());
+
+	return 0;
+}
+
+static struct task_struct *bL_switcher_thread_create(int cpu, void *arg)
+{
+	struct task_struct *task;
+
+	task = kthread_create_on_node(bL_switcher_thread, arg,
+				      cpu_to_node(cpu), "kswitcher_%d", cpu);
+	if (!IS_ERR(task)) {
+		kthread_bind(task, cpu);
+		wake_up_process(task);
+	} else
+		pr_err("%s failed for CPU %d\n", __func__, cpu);
+	return task;
+}
+
+/*
+ * bL_switch_request_cb - Switch to a specific cluster for the given CPU,
+ *      with completion notification via a callback
+ *
+ * @cpu: the CPU to switch
+ * @new_cluster_id: the ID of the cluster to switch to.
+ * @completer: switch completion callback.  if non-NULL,
+ *	@completer(@completer_cookie) will be called on completion of
+ *	the switch, in non-atomic context.
+ * @completer_cookie: opaque context argument for @completer.
+ *
+ * This function causes a cluster switch on the given CPU by waking up
+ * the appropriate switcher thread.  This function may or may not return
+ * before the switch has occurred.
+ *
+ * If a @completer callback function is supplied, it will be called when
+ * the switch is complete.  This can be used to determine asynchronously
+ * when the switch is complete, regardless of when bL_switch_request()
+ * returns.  When @completer is supplied, no new switch request is permitted
+ * for the affected CPU until after the switch is complete, and @completer
+ * has returned.
+ */
+int bL_switch_request_cb(unsigned int cpu, unsigned int new_cluster_id,
+			 bL_switch_completion_handler completer,
+			 void *completer_cookie)
+{
+	struct bL_thread *t;
+
+	if (cpu >= ARRAY_SIZE(bL_threads)) {
+		pr_err("%s: cpu %d out of bounds\n", __func__, cpu);
+		return -EINVAL;
+	}
+
+	t = &bL_threads[cpu];
+
+	if (IS_ERR(t->task))
+		return PTR_ERR(t->task);
+	if (!t->task)
+		return -ESRCH;
+
+	spin_lock(&t->lock);
+	if (t->completer) {
+		spin_unlock(&t->lock);
+		return -EBUSY;
+	}
+	t->completer = completer;
+	t->completer_cookie = completer_cookie;
+	t->wanted_cluster = new_cluster_id;
+	spin_unlock(&t->lock);
+	wake_up(&t->wq);
+	return 0;
+}
+EXPORT_SYMBOL_GPL(bL_switch_request_cb);
+
+/*
+ * Activation and configuration code.
+ */
+
+static DEFINE_MUTEX(bL_switcher_activation_lock);
+static BLOCKING_NOTIFIER_HEAD(bL_activation_notifier);
+static unsigned int bL_switcher_active;
+static unsigned int bL_switcher_cpu_original_cluster[NR_CPUS];
+static cpumask_t bL_switcher_removed_logical_cpus;
+
+int bL_switcher_register_notifier(struct notifier_block *nb)
+{
+	return blocking_notifier_chain_register(&bL_activation_notifier, nb);
+}
+EXPORT_SYMBOL_GPL(bL_switcher_register_notifier);
+
+int bL_switcher_unregister_notifier(struct notifier_block *nb)
+{
+	return blocking_notifier_chain_unregister(&bL_activation_notifier, nb);
+}
+EXPORT_SYMBOL_GPL(bL_switcher_unregister_notifier);
+
+static int bL_activation_notify(unsigned long val)
+{
+	int ret;
+
+	ret = blocking_notifier_call_chain(&bL_activation_notifier, val, NULL);
+	if (ret & NOTIFY_STOP_MASK)
+		pr_err("%s: notifier chain failed with status 0x%x\n",
+			__func__, ret);
+	return notifier_to_errno(ret);
+}
+
+static void bL_switcher_restore_cpus(void)
+{
+	int i;
+
+	for_each_cpu(i, &bL_switcher_removed_logical_cpus)
+		cpu_up(i);
+}
+
+static int bL_switcher_halve_cpus(void)
+{
+	int i, j, cluster_0, gic_id, ret;
+	unsigned int cpu, cluster, mask;
+	cpumask_t available_cpus;
+
+	/* First pass to validate what we have */
+	mask = 0;
+	for_each_online_cpu(i) {
+		cpu = MPIDR_AFFINITY_LEVEL(cpu_logical_map(i), 0);
+		cluster = MPIDR_AFFINITY_LEVEL(cpu_logical_map(i), 1);
+		if (cluster >= 2) {
+			pr_err("%s: only dual cluster systems are supported\n", __func__);
+			return -EINVAL;
+		}
+		if (WARN_ON(cpu >= MAX_CPUS_PER_CLUSTER))
+			return -EINVAL;
+		mask |= (1 << cluster);
+	}
+	if (mask != 3) {
+		pr_err("%s: no CPU pairing possible\n", __func__);
+		return -EINVAL;
+	}
+
+	/*
+	 * Now let's do the pairing.  We match each CPU with another CPU
+	 * from a different cluster.  To get a uniform scheduling behavior
+	 * without fiddling with CPU topology and compute capacity data,
+	 * we'll use logical CPUs initially belonging to the same cluster.
+	 */
+	memset(bL_switcher_cpu_pairing, -1, sizeof(bL_switcher_cpu_pairing));
+	cpumask_copy(&available_cpus, cpu_online_mask);
+	cluster_0 = -1;
+	for_each_cpu(i, &available_cpus) {
+		int match = -1;
+		cluster = MPIDR_AFFINITY_LEVEL(cpu_logical_map(i), 1);
+		if (cluster_0 == -1)
+			cluster_0 = cluster;
+		if (cluster != cluster_0)
+			continue;
+		cpumask_clear_cpu(i, &available_cpus);
+		for_each_cpu(j, &available_cpus) {
+			cluster = MPIDR_AFFINITY_LEVEL(cpu_logical_map(j), 1);
+			/*
+			 * Let's remember the last match to create "odd"
+			 * pairings on purpose in order for other code not
+			 * to assume any relation between physical and
+			 * logical CPU numbers.
+			 */
+			if (cluster != cluster_0)
+				match = j;
+		}
+		if (match != -1) {
+			bL_switcher_cpu_pairing[i] = match;
+			cpumask_clear_cpu(match, &available_cpus);
+			pr_info("CPU%d paired with CPU%d\n", i, match);
+		}
+	}
+
+	/*
+	 * Now we disable the unwanted CPUs i.e. everything that has no
+	 * pairing information (that includes the pairing counterparts).
+	 */
+	cpumask_clear(&bL_switcher_removed_logical_cpus);
+	for_each_online_cpu(i) {
+		cpu = MPIDR_AFFINITY_LEVEL(cpu_logical_map(i), 0);
+		cluster = MPIDR_AFFINITY_LEVEL(cpu_logical_map(i), 1);
+
+		/* Let's take note of the GIC ID for this CPU */
+		gic_id = gic_get_cpu_id(i);
+		if (gic_id < 0) {
+			pr_err("%s: bad GIC ID for CPU %d\n", __func__, i);
+			bL_switcher_restore_cpus();
+			return -EINVAL;
+		}
+		bL_gic_id[cpu][cluster] = gic_id;
+		pr_info("GIC ID for CPU %u cluster %u is %u\n",
+			cpu, cluster, gic_id);
+
+		if (bL_switcher_cpu_pairing[i] != -1) {
+			bL_switcher_cpu_original_cluster[i] = cluster;
+			continue;
+		}
+
+		ret = cpu_down(i);
+		if (ret) {
+			bL_switcher_restore_cpus();
+			return ret;
+		}
+		cpumask_set_cpu(i, &bL_switcher_removed_logical_cpus);
+	}
+
+	return 0;
+}
+
+/* Determine the logical CPU a given physical CPU is grouped on. */
+int bL_switcher_get_logical_index(u32 mpidr)
+{
+	int cpu;
+
+	if (!bL_switcher_active)
+		return -EUNATCH;
+
+	mpidr &= MPIDR_HWID_BITMASK;
+	for_each_online_cpu(cpu) {
+		int pairing = bL_switcher_cpu_pairing[cpu];
+		if (pairing == -1)
+			continue;
+		if ((mpidr == cpu_logical_map(cpu)) ||
+		    (mpidr == cpu_logical_map(pairing)))
+			return cpu;
+	}
+	return -EINVAL;
+}
+
+static void bL_switcher_trace_trigger_cpu(void *__always_unused info)
+{
+	trace_cpu_migrate_current(get_ns(), read_mpidr());
+}
+
+int bL_switcher_trace_trigger(void)
+{
+	int ret;
+
+	preempt_disable();
+
+	bL_switcher_trace_trigger_cpu(NULL);
+	ret = smp_call_function(bL_switcher_trace_trigger_cpu, NULL, true);
+
+	preempt_enable();
+
+	return ret;
+}
+EXPORT_SYMBOL_GPL(bL_switcher_trace_trigger);
+
+static int bL_switcher_enable(void)
+{
+	int cpu, ret;
+
+	mutex_lock(&bL_switcher_activation_lock);
+	lock_device_hotplug();
+	if (bL_switcher_active) {
+		unlock_device_hotplug();
+		mutex_unlock(&bL_switcher_activation_lock);
+		return 0;
+	}
+
+	pr_info("big.LITTLE switcher initializing\n");
+
+	ret = bL_activation_notify(BL_NOTIFY_PRE_ENABLE);
+	if (ret)
+		goto error;
+
+	ret = bL_switcher_halve_cpus();
+	if (ret)
+		goto error;
+
+	bL_switcher_trace_trigger();
+
+	for_each_online_cpu(cpu) {
+		struct bL_thread *t = &bL_threads[cpu];
+		spin_lock_init(&t->lock);
+		init_waitqueue_head(&t->wq);
+		init_completion(&t->started);
+		t->wanted_cluster = -1;
+		t->task = bL_switcher_thread_create(cpu, t);
+	}
+
+	bL_switcher_active = 1;
+	bL_activation_notify(BL_NOTIFY_POST_ENABLE);
+	pr_info("big.LITTLE switcher initialized\n");
+	goto out;
+
+error:
+	pr_warn("big.LITTLE switcher initialization failed\n");
+	bL_activation_notify(BL_NOTIFY_POST_DISABLE);
+
+out:
+	unlock_device_hotplug();
+	mutex_unlock(&bL_switcher_activation_lock);
+	return ret;
+}
+
+#ifdef CONFIG_SYSFS
+
+static void bL_switcher_disable(void)
+{
+	unsigned int cpu, cluster;
+	struct bL_thread *t;
+	struct task_struct *task;
+
+	mutex_lock(&bL_switcher_activation_lock);
+	lock_device_hotplug();
+
+	if (!bL_switcher_active)
+		goto out;
+
+	if (bL_activation_notify(BL_NOTIFY_PRE_DISABLE) != 0) {
+		bL_activation_notify(BL_NOTIFY_POST_ENABLE);
+		goto out;
+	}
+
+	bL_switcher_active = 0;
+
+	/*
+	 * To deactivate the switcher, we must shut down the switcher
+	 * threads to prevent any other requests from being accepted.
+	 * Then, if the final cluster for given logical CPU is not the
+	 * same as the original one, we'll recreate a switcher thread
+	 * just for the purpose of switching the CPU back without any
+	 * possibility for interference from external requests.
+	 */
+	for_each_online_cpu(cpu) {
+		t = &bL_threads[cpu];
+		task = t->task;
+		t->task = NULL;
+		if (!task || IS_ERR(task))
+			continue;
+		kthread_stop(task);
+		/* no more switch may happen on this CPU at this point */
+		cluster = MPIDR_AFFINITY_LEVEL(cpu_logical_map(cpu), 1);
+		if (cluster == bL_switcher_cpu_original_cluster[cpu])
+			continue;
+		init_completion(&t->started);
+		t->wanted_cluster = bL_switcher_cpu_original_cluster[cpu];
+		task = bL_switcher_thread_create(cpu, t);
+		if (!IS_ERR(task)) {
+			wait_for_completion(&t->started);
+			kthread_stop(task);
+			cluster = MPIDR_AFFINITY_LEVEL(cpu_logical_map(cpu), 1);
+			if (cluster == bL_switcher_cpu_original_cluster[cpu])
+				continue;
+		}
+		/* If execution gets here, we're in trouble. */
+		pr_crit("%s: unable to restore original cluster for CPU %d\n",
+			__func__, cpu);
+		pr_crit("%s: CPU %d can't be restored\n",
+			__func__, bL_switcher_cpu_pairing[cpu]);
+		cpumask_clear_cpu(bL_switcher_cpu_pairing[cpu],
+				  &bL_switcher_removed_logical_cpus);
+	}
+
+	bL_switcher_restore_cpus();
+	bL_switcher_trace_trigger();
+
+	bL_activation_notify(BL_NOTIFY_POST_DISABLE);
+
+out:
+	unlock_device_hotplug();
+	mutex_unlock(&bL_switcher_activation_lock);
+}
+
+static ssize_t bL_switcher_active_show(struct kobject *kobj,
+		struct kobj_attribute *attr, char *buf)
+{
+	return sprintf(buf, "%u\n", bL_switcher_active);
+}
+
+static ssize_t bL_switcher_active_store(struct kobject *kobj,
+		struct kobj_attribute *attr, const char *buf, size_t count)
+{
+	int ret;
+
+	switch (buf[0]) {
+	case '0':
+		bL_switcher_disable();
+		ret = 0;
+		break;
+	case '1':
+		ret = bL_switcher_enable();
+		break;
+	default:
+		ret = -EINVAL;
+	}
+
+	return (ret >= 0) ? count : ret;
+}
+
+static ssize_t bL_switcher_trace_trigger_store(struct kobject *kobj,
+		struct kobj_attribute *attr, const char *buf, size_t count)
+{
+	int ret = bL_switcher_trace_trigger();
+
+	return ret ? ret : count;
+}
+
+static struct kobj_attribute bL_switcher_active_attr =
+	__ATTR(active, 0644, bL_switcher_active_show, bL_switcher_active_store);
+
+static struct kobj_attribute bL_switcher_trace_trigger_attr =
+	__ATTR(trace_trigger, 0200, NULL, bL_switcher_trace_trigger_store);
+
+static struct attribute *bL_switcher_attrs[] = {
+	&bL_switcher_active_attr.attr,
+	&bL_switcher_trace_trigger_attr.attr,
+	NULL,
+};
+
+static struct attribute_group bL_switcher_attr_group = {
+	.attrs = bL_switcher_attrs,
+};
+
+static struct kobject *bL_switcher_kobj;
+
+static int __init bL_switcher_sysfs_init(void)
+{
+	int ret;
+
+	bL_switcher_kobj = kobject_create_and_add("bL_switcher", kernel_kobj);
+	if (!bL_switcher_kobj)
+		return -ENOMEM;
+	ret = sysfs_create_group(bL_switcher_kobj, &bL_switcher_attr_group);
+	if (ret)
+		kobject_put(bL_switcher_kobj);
+	return ret;
+}
+
+#endif  /* CONFIG_SYSFS */
+
+bool bL_switcher_get_enabled(void)
+{
+	mutex_lock(&bL_switcher_activation_lock);
+
+	return bL_switcher_active;
+}
+EXPORT_SYMBOL_GPL(bL_switcher_get_enabled);
+
+void bL_switcher_put_enabled(void)
+{
+	mutex_unlock(&bL_switcher_activation_lock);
+}
+EXPORT_SYMBOL_GPL(bL_switcher_put_enabled);
+
+/*
+ * Veto any CPU hotplug operation on those CPUs we've removed
+ * while the switcher is active.
+ * We're just not ready to deal with that given the trickery involved.
+ */
+static int bL_switcher_hotplug_callback(struct notifier_block *nfb,
+					unsigned long action, void *hcpu)
+{
+	if (bL_switcher_active) {
+		int pairing = bL_switcher_cpu_pairing[(unsigned long)hcpu];
+		switch (action & 0xf) {
+		case CPU_UP_PREPARE:
+		case CPU_DOWN_PREPARE:
+			if (pairing == -1)
+				return NOTIFY_BAD;
+		}
+	}
+	return NOTIFY_DONE;
+}
+
+static bool no_bL_switcher;
+core_param(no_bL_switcher, no_bL_switcher, bool, 0644);
+
+static int __init bL_switcher_init(void)
+{
+	int ret;
+
+	if (MAX_NR_CLUSTERS != 2) {
+		pr_err("%s: only dual cluster systems are supported\n", __func__);
+		return -EINVAL;
+	}
+
+	cpu_notifier(bL_switcher_hotplug_callback, 0);
+
+	if (!no_bL_switcher) {
+		ret = bL_switcher_enable();
+		if (ret)
+			return ret;
+	}
+
+#ifdef CONFIG_SYSFS
+	ret = bL_switcher_sysfs_init();
+	if (ret)
+		pr_err("%s: unable to create sysfs entry\n", __func__);
+#endif
+
+	return 0;
+}
+
+late_initcall(bL_switcher_init);
diff --git a/arch/arm/common/bL_switcher_dummy_if.c b/arch/arm/common/bL_switcher_dummy_if.c
new file mode 100644
index 0000000..3f47f12
--- /dev/null
+++ b/arch/arm/common/bL_switcher_dummy_if.c
@@ -0,0 +1,71 @@
+/*
+ * arch/arm/common/bL_switcher_dummy_if.c -- b.L switcher dummy interface
+ *
+ * Created by:	Nicolas Pitre, November 2012
+ * Copyright:	(C) 2012-2013  Linaro Limited
+ *
+ * Dummy interface to user space for debugging purpose only.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/fs.h>
+#include <linux/miscdevice.h>
+#include <asm/uaccess.h>
+#include <asm/bL_switcher.h>
+
+static ssize_t bL_switcher_write(struct file *file, const char __user *buf,
+			size_t len, loff_t *pos)
+{
+	unsigned char val[3];
+	unsigned int cpu, cluster;
+	int ret;
+
+	pr_debug("%s\n", __func__);
+
+	if (len < 3)
+		return -EINVAL;
+
+	if (copy_from_user(val, buf, 3))
+		return -EFAULT;
+
+	/* format: <cpu#>,<cluster#> */
+	if (val[0] < '0' || val[0] > '9' ||
+	    val[1] != ',' ||
+	    val[2] < '0' || val[2] > '1')
+		return -EINVAL;
+
+	cpu = val[0] - '0';
+	cluster = val[2] - '0';
+	ret = bL_switch_request(cpu, cluster);
+
+	return ret ? : len;
+}
+
+static const struct file_operations bL_switcher_fops = {
+	.write		= bL_switcher_write,
+	.owner	= THIS_MODULE,
+};
+
+static struct miscdevice bL_switcher_device = {
+	MISC_DYNAMIC_MINOR,
+	"b.L_switcher",
+	&bL_switcher_fops
+};
+
+static int __init bL_switcher_dummy_if_init(void)
+{
+	return misc_register(&bL_switcher_device);
+}
+
+static void __exit bL_switcher_dummy_if_exit(void)
+{
+	misc_deregister(&bL_switcher_device);
+}
+
+module_init(bL_switcher_dummy_if_init);
+module_exit(bL_switcher_dummy_if_exit);
diff --git a/arch/arm/common/mcpm_entry.c b/arch/arm/common/mcpm_entry.c
index 9902509..26020a0 100644
--- a/arch/arm/common/mcpm_entry.c
+++ b/arch/arm/common/mcpm_entry.c
@@ -27,6 +27,18 @@ void mcpm_set_entry_vector(unsigned cpu, unsigned cluster, void *ptr)
 	sync_cache_w(&mcpm_entry_vectors[cluster][cpu]);
 }
 
+extern unsigned long mcpm_entry_early_pokes[MAX_NR_CLUSTERS][MAX_CPUS_PER_CLUSTER][2];
+
+void mcpm_set_early_poke(unsigned cpu, unsigned cluster,
+			 unsigned long poke_phys_addr, unsigned long poke_val)
+{
+	unsigned long *poke = &mcpm_entry_early_pokes[cluster][cpu][0];
+	poke[0] = poke_phys_addr;
+	poke[1] = poke_val;
+	__cpuc_flush_dcache_area((void *)poke, 8);
+	outer_clean_range(__pa(poke), __pa(poke + 2));
+}
+
 static const struct mcpm_platform_ops *platform_ops;
 
 int __init mcpm_platform_register(const struct mcpm_platform_ops *ops)
@@ -90,6 +102,21 @@ void mcpm_cpu_power_down(void)
 	BUG();
 }
 
+int mcpm_cpu_power_down_finish(unsigned int cpu, unsigned int cluster)
+{
+	int ret;
+
+	if (WARN_ON_ONCE(!platform_ops || !platform_ops->power_down_finish))
+		return -EUNATCH;
+
+	ret = platform_ops->power_down_finish(cpu, cluster);
+	if (ret)
+		pr_warn("%s: cpu %u, cluster %u failed to power down (%d)\n",
+			__func__, cpu, cluster, ret);
+
+	return ret;
+}
+
 void mcpm_cpu_suspend(u64 expected_residency)
 {
 	phys_reset_t phys_reset;
diff --git a/arch/arm/common/mcpm_head.S b/arch/arm/common/mcpm_head.S
index 39c96df..e02db4b 100644
--- a/arch/arm/common/mcpm_head.S
+++ b/arch/arm/common/mcpm_head.S
@@ -15,6 +15,7 @@
 
 #include <linux/linkage.h>
 #include <asm/mcpm.h>
+#include <asm/assembler.h>
 
 #include "vlock.h"
 
@@ -47,6 +48,7 @@
 
 ENTRY(mcpm_entry_point)
 
+ ARM_BE8(setend        be)
  THUMB(	adr	r12, BSYM(1f)	)
  THUMB(	bx	r12		)
  THUMB(	.thumb			)
@@ -71,12 +73,19 @@ ENTRY(mcpm_entry_point)
 	 * position independent way.
 	 */
 	adr	r5, 3f
-	ldmia	r5, {r6, r7, r8, r11}
+	ldmia	r5, {r0, r6, r7, r8, r11}
+	add	r0, r5, r0			@ r0 = mcpm_entry_early_pokes
 	add	r6, r5, r6			@ r6 = mcpm_entry_vectors
 	ldr	r7, [r5, r7]			@ r7 = mcpm_power_up_setup_phys
 	add	r8, r5, r8			@ r8 = mcpm_sync
 	add	r11, r5, r11			@ r11 = first_man_locks
 
+	@ Perform an early poke, if any
+	add	r0, r0, r4, lsl #3
+	ldmia	r0, {r0, r1}
+	teq	r0, #0
+	strne	r1, [r0]
+
 	mov	r0, #MCPM_SYNC_CLUSTER_SIZE
 	mla	r8, r0, r10, r8			@ r8 = sync cluster base
 
@@ -195,7 +204,8 @@ mcpm_entry_gated:
 
 	.align	2
 
-3:	.word	mcpm_entry_vectors - .
+3:	.word	mcpm_entry_early_pokes - .
+	.word	mcpm_entry_vectors - 3b
 	.word	mcpm_power_up_setup_phys - 3b
 	.word	mcpm_sync - 3b
 	.word	first_man_locks - 3b
@@ -214,6 +224,10 @@ first_man_locks:
 ENTRY(mcpm_entry_vectors)
 	.space	4 * MAX_NR_CLUSTERS * MAX_CPUS_PER_CLUSTER
 
+	.type	mcpm_entry_early_pokes, #object
+ENTRY(mcpm_entry_early_pokes)
+	.space	8 * MAX_NR_CLUSTERS * MAX_CPUS_PER_CLUSTER
+
 	.type	mcpm_power_up_setup_phys, #object
 ENTRY(mcpm_power_up_setup_phys)
 	.space  4		@ set by mcpm_sync_init()
diff --git a/arch/arm/common/mcpm_platsmp.c b/arch/arm/common/mcpm_platsmp.c
index 1bc34c7..177251a 100644
--- a/arch/arm/common/mcpm_platsmp.c
+++ b/arch/arm/common/mcpm_platsmp.c
@@ -19,14 +19,23 @@
 #include <asm/smp.h>
 #include <asm/smp_plat.h>
 
+static void cpu_to_pcpu(unsigned int cpu,
+			unsigned int *pcpu, unsigned int *pcluster)
+{
+	unsigned int mpidr;
+
+	mpidr = cpu_logical_map(cpu);
+	*pcpu = MPIDR_AFFINITY_LEVEL(mpidr, 0);
+	*pcluster = MPIDR_AFFINITY_LEVEL(mpidr, 1);
+}
+
 static int mcpm_boot_secondary(unsigned int cpu, struct task_struct *idle)
 {
-	unsigned int mpidr, pcpu, pcluster, ret;
+	unsigned int pcpu, pcluster, ret;
 	extern void secondary_startup(void);
 
-	mpidr = cpu_logical_map(cpu);
-	pcpu = MPIDR_AFFINITY_LEVEL(mpidr, 0);
-	pcluster = MPIDR_AFFINITY_LEVEL(mpidr, 1);
+	cpu_to_pcpu(cpu, &pcpu, &pcluster);
+
 	pr_debug("%s: logical CPU %d is physical CPU %d cluster %d\n",
 		 __func__, cpu, pcpu, pcluster);
 
@@ -47,6 +56,15 @@ static void mcpm_secondary_init(unsigned int cpu)
 
 #ifdef CONFIG_HOTPLUG_CPU
 
+static int mcpm_cpu_kill(unsigned int cpu)
+{
+	unsigned int pcpu, pcluster;
+
+	cpu_to_pcpu(cpu, &pcpu, &pcluster);
+
+	return !mcpm_cpu_power_down_finish(pcpu, pcluster);
+}
+
 static int mcpm_cpu_disable(unsigned int cpu)
 {
 	/*
@@ -73,6 +91,7 @@ static struct smp_operations __initdata mcpm_smp_ops = {
 	.smp_boot_secondary	= mcpm_boot_secondary,
 	.smp_secondary_init	= mcpm_secondary_init,
 #ifdef CONFIG_HOTPLUG_CPU
+	.cpu_kill		= mcpm_cpu_kill,
 	.cpu_disable		= mcpm_cpu_disable,
 	.cpu_die		= mcpm_cpu_die,
 #endif
diff --git a/arch/arm/common/timer-sp.c b/arch/arm/common/timer-sp.c
index e901d0f..ce922d0 100644
--- a/arch/arm/common/timer-sp.c
+++ b/arch/arm/common/timer-sp.c
@@ -175,7 +175,7 @@ static struct clock_event_device sp804_clockevent = {
 
 static struct irqaction sp804_timer_irq = {
 	.name		= "timer",
-	.flags		= IRQF_DISABLED | IRQF_TIMER | IRQF_IRQPOLL,
+	.flags		= IRQF_TIMER | IRQF_IRQPOLL,
 	.handler	= sp804_timer_interrupt,
 	.dev_id		= &sp804_clockevent,
 };
diff --git a/arch/arm/configs/h3600_defconfig b/arch/arm/configs/h3600_defconfig
index 317960f..0142ec3 100644
--- a/arch/arm/configs/h3600_defconfig
+++ b/arch/arm/configs/h3600_defconfig
@@ -1,5 +1,6 @@
-CONFIG_EXPERIMENTAL=y
 CONFIG_SYSVIPC=y
+CONFIG_NO_HZ_IDLE=y
+CONFIG_HIGH_RES_TIMERS=y
 CONFIG_LOG_BUF_SHIFT=14
 CONFIG_BLK_DEV_INITRD=y
 CONFIG_MODULES=y
@@ -11,11 +12,11 @@ CONFIG_ARCH_SA1100=y
 CONFIG_SA1100_H3600=y
 CONFIG_PCCARD=y
 CONFIG_PCMCIA_SA1100=y
+CONFIG_PREEMPT=y
 CONFIG_ZBOOT_ROM_TEXT=0x0
 CONFIG_ZBOOT_ROM_BSS=0x0
 # CONFIG_CPU_FREQ_STAT is not set
 CONFIG_FPE_NWFPE=y
-CONFIG_PM=y
 CONFIG_NET=y
 CONFIG_UNIX=y
 CONFIG_INET=y
@@ -24,13 +25,10 @@ CONFIG_IRDA=m
 CONFIG_IRLAN=m
 CONFIG_IRNET=m
 CONFIG_IRCOMM=m
-CONFIG_SA1100_FIR=m
 # CONFIG_WIRELESS is not set
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
 CONFIG_MTD=y
-CONFIG_MTD_PARTITIONS=y
 CONFIG_MTD_REDBOOT_PARTS=y
-CONFIG_MTD_CHAR=y
 CONFIG_MTD_BLOCK=y
 CONFIG_MTD_CFI=y
 CONFIG_MTD_CFI_ADV_OPTIONS=y
@@ -41,19 +39,15 @@ CONFIG_MTD_SA1100=y
 CONFIG_BLK_DEV_LOOP=m
 CONFIG_BLK_DEV_RAM=y
 CONFIG_BLK_DEV_RAM_SIZE=8192
-# CONFIG_MISC_DEVICES is not set
 CONFIG_IDE=y
 CONFIG_BLK_DEV_IDECS=y
 CONFIG_NETDEVICES=y
-# CONFIG_NETDEV_1000 is not set
-# CONFIG_NETDEV_10000 is not set
-# CONFIG_WLAN is not set
-CONFIG_NET_PCMCIA=y
 CONFIG_PCMCIA_PCNET=y
 CONFIG_PPP=m
-CONFIG_PPP_ASYNC=m
-CONFIG_PPP_DEFLATE=m
 CONFIG_PPP_BSDCOMP=m
+CONFIG_PPP_DEFLATE=m
+CONFIG_PPP_ASYNC=m
+# CONFIG_WLAN is not set
 # CONFIG_KEYBOARD_ATKBD is not set
 CONFIG_KEYBOARD_GPIO=y
 # CONFIG_INPUT_MOUSE is not set
@@ -64,8 +58,6 @@ CONFIG_SERIAL_SA1100_CONSOLE=y
 # CONFIG_HWMON is not set
 CONFIG_FB=y
 CONFIG_FB_SA1100=y
-# CONFIG_VGA_CONSOLE is not set
-# CONFIG_HID_SUPPORT is not set
 # CONFIG_USB_SUPPORT is not set
 CONFIG_EXT2_FS=y
 CONFIG_MSDOS_FS=m
@@ -74,6 +66,4 @@ CONFIG_JFFS2_FS=y
 CONFIG_CRAMFS=m
 CONFIG_NFS_FS=y
 CONFIG_NFSD=m
-CONFIG_SMB_FS=m
 CONFIG_NLS=y
-# CONFIG_RCU_CPU_STALL_DETECTOR is not set
diff --git a/arch/arm/crypto/.gitignore b/arch/arm/crypto/.gitignore
new file mode 100644
index 0000000..6231d36
--- /dev/null
+++ b/arch/arm/crypto/.gitignore
@@ -0,0 +1 @@
+aesbs-core.S
diff --git a/arch/arm/crypto/Makefile b/arch/arm/crypto/Makefile
index a2c8385..81cda39 100644
--- a/arch/arm/crypto/Makefile
+++ b/arch/arm/crypto/Makefile
@@ -3,7 +3,17 @@
 #
 
 obj-$(CONFIG_CRYPTO_AES_ARM) += aes-arm.o
+obj-$(CONFIG_CRYPTO_AES_ARM_BS) += aes-arm-bs.o
 obj-$(CONFIG_CRYPTO_SHA1_ARM) += sha1-arm.o
 
-aes-arm-y  := aes-armv4.o aes_glue.o
-sha1-arm-y := sha1-armv4-large.o sha1_glue.o
+aes-arm-y	:= aes-armv4.o aes_glue.o
+aes-arm-bs-y	:= aesbs-core.o aesbs-glue.o
+sha1-arm-y	:= sha1-armv4-large.o sha1_glue.o
+
+quiet_cmd_perl = PERL    $@
+      cmd_perl = $(PERL) $(<) > $(@)
+
+$(src)/aesbs-core.S_shipped: $(src)/bsaes-armv7.pl
+	$(call cmd,perl)
+
+.PRECIOUS: $(obj)/aesbs-core.S
diff --git a/arch/arm/crypto/aes_glue.c b/arch/arm/crypto/aes_glue.c
index 59f7877..3003fa1 100644
--- a/arch/arm/crypto/aes_glue.c
+++ b/arch/arm/crypto/aes_glue.c
@@ -6,22 +6,12 @@
 #include <linux/crypto.h>
 #include <crypto/aes.h>
 
-#define AES_MAXNR 14
+#include "aes_glue.h"
 
-typedef struct {
-	unsigned int rd_key[4 *(AES_MAXNR + 1)];
-	int rounds;
-} AES_KEY;
-
-struct AES_CTX {
-	AES_KEY enc_key;
-	AES_KEY dec_key;
-};
-
-asmlinkage void AES_encrypt(const u8 *in, u8 *out, AES_KEY *ctx);
-asmlinkage void AES_decrypt(const u8 *in, u8 *out, AES_KEY *ctx);
-asmlinkage int private_AES_set_decrypt_key(const unsigned char *userKey, const int bits, AES_KEY *key);
-asmlinkage int private_AES_set_encrypt_key(const unsigned char *userKey, const int bits, AES_KEY *key);
+EXPORT_SYMBOL(AES_encrypt);
+EXPORT_SYMBOL(AES_decrypt);
+EXPORT_SYMBOL(private_AES_set_encrypt_key);
+EXPORT_SYMBOL(private_AES_set_decrypt_key);
 
 static void aes_encrypt(struct crypto_tfm *tfm, u8 *dst, const u8 *src)
 {
@@ -81,7 +71,7 @@ static struct crypto_alg aes_alg = {
 		.cipher	= {
 			.cia_min_keysize	= AES_MIN_KEY_SIZE,
 			.cia_max_keysize	= AES_MAX_KEY_SIZE,
-			.cia_setkey			= aes_set_key,
+			.cia_setkey		= aes_set_key,
 			.cia_encrypt		= aes_encrypt,
 			.cia_decrypt		= aes_decrypt
 		}
diff --git a/arch/arm/crypto/aes_glue.h b/arch/arm/crypto/aes_glue.h
new file mode 100644
index 0000000..cca3e51
--- /dev/null
+++ b/arch/arm/crypto/aes_glue.h
@@ -0,0 +1,19 @@
+
+#define AES_MAXNR 14
+
+struct AES_KEY {
+	unsigned int rd_key[4 * (AES_MAXNR + 1)];
+	int rounds;
+};
+
+struct AES_CTX {
+	struct AES_KEY enc_key;
+	struct AES_KEY dec_key;
+};
+
+asmlinkage void AES_encrypt(const u8 *in, u8 *out, struct AES_KEY *ctx);
+asmlinkage void AES_decrypt(const u8 *in, u8 *out, struct AES_KEY *ctx);
+asmlinkage int private_AES_set_decrypt_key(const unsigned char *userKey,
+					   const int bits, struct AES_KEY *key);
+asmlinkage int private_AES_set_encrypt_key(const unsigned char *userKey,
+					   const int bits, struct AES_KEY *key);
diff --git a/arch/arm/crypto/aesbs-core.S_shipped b/arch/arm/crypto/aesbs-core.S_shipped
new file mode 100644
index 0000000..64205d4
--- /dev/null
+++ b/arch/arm/crypto/aesbs-core.S_shipped
@@ -0,0 +1,2544 @@
+
+@ ====================================================================
+@ Written by Andy Polyakov <appro@openssl.org> for the OpenSSL
+@ project. The module is, however, dual licensed under OpenSSL and
+@ CRYPTOGAMS licenses depending on where you obtain it. For further
+@ details see http://www.openssl.org/~appro/cryptogams/.
+@
+@ Specific modes and adaptation for Linux kernel by Ard Biesheuvel
+@ <ard.biesheuvel@linaro.org>. Permission to use under GPL terms is
+@ granted.
+@ ====================================================================
+
+@ Bit-sliced AES for ARM NEON
+@
+@ February 2012.
+@
+@ This implementation is direct adaptation of bsaes-x86_64 module for
+@ ARM NEON. Except that this module is endian-neutral [in sense that
+@ it can be compiled for either endianness] by courtesy of vld1.8's
+@ neutrality. Initial version doesn't implement interface to OpenSSL,
+@ only low-level primitives and unsupported entry points, just enough
+@ to collect performance results, which for Cortex-A8 core are:
+@
+@ encrypt	19.5 cycles per byte processed with 128-bit key
+@ decrypt	22.1 cycles per byte processed with 128-bit key
+@ key conv.	440  cycles per 128-bit key/0.18 of 8x block
+@
+@ Snapdragon S4 encrypts byte in 17.6 cycles and decrypts in 19.7,
+@ which is [much] worse than anticipated (for further details see
+@ http://www.openssl.org/~appro/Snapdragon-S4.html).
+@
+@ Cortex-A15 manages in 14.2/16.1 cycles [when integer-only code
+@ manages in 20.0 cycles].
+@
+@ When comparing to x86_64 results keep in mind that NEON unit is
+@ [mostly] single-issue and thus can't [fully] benefit from
+@ instruction-level parallelism. And when comparing to aes-armv4
+@ results keep in mind key schedule conversion overhead (see
+@ bsaes-x86_64.pl for further details)...
+@
+@						<appro@openssl.org>
+
+@ April-August 2013
+@
+@ Add CBC, CTR and XTS subroutines, adapt for kernel use.
+@
+@					<ard.biesheuvel@linaro.org>
+
+#ifndef __KERNEL__
+# include "arm_arch.h"
+
+# define VFP_ABI_PUSH	vstmdb	sp!,{d8-d15}
+# define VFP_ABI_POP	vldmia	sp!,{d8-d15}
+# define VFP_ABI_FRAME	0x40
+#else
+# define VFP_ABI_PUSH
+# define VFP_ABI_POP
+# define VFP_ABI_FRAME	0
+# define BSAES_ASM_EXTENDED_KEY
+# define XTS_CHAIN_TWEAK
+# define __ARM_ARCH__ __LINUX_ARM_ARCH__
+#endif
+
+#ifdef __thumb__
+# define adrl adr
+#endif
+
+#if __ARM_ARCH__>=7
+.text
+.syntax	unified 	@ ARMv7-capable assembler is expected to handle this
+#ifdef __thumb2__
+.thumb
+#else
+.code   32
+#endif
+
+.fpu	neon
+
+.type	_bsaes_decrypt8,%function
+.align	4
+_bsaes_decrypt8:
+	adr	r6,_bsaes_decrypt8
+	vldmia	r4!, {q9}		@ round 0 key
+	add	r6,r6,#.LM0ISR-_bsaes_decrypt8
+
+	vldmia	r6!, {q8}		@ .LM0ISR
+	veor	q10, q0, q9	@ xor with round0 key
+	veor	q11, q1, q9
+	 vtbl.8	d0, {q10}, d16
+	 vtbl.8	d1, {q10}, d17
+	veor	q12, q2, q9
+	 vtbl.8	d2, {q11}, d16
+	 vtbl.8	d3, {q11}, d17
+	veor	q13, q3, q9
+	 vtbl.8	d4, {q12}, d16
+	 vtbl.8	d5, {q12}, d17
+	veor	q14, q4, q9
+	 vtbl.8	d6, {q13}, d16
+	 vtbl.8	d7, {q13}, d17
+	veor	q15, q5, q9
+	 vtbl.8	d8, {q14}, d16
+	 vtbl.8	d9, {q14}, d17
+	veor	q10, q6, q9
+	 vtbl.8	d10, {q15}, d16
+	 vtbl.8	d11, {q15}, d17
+	veor	q11, q7, q9
+	 vtbl.8	d12, {q10}, d16
+	 vtbl.8	d13, {q10}, d17
+	 vtbl.8	d14, {q11}, d16
+	 vtbl.8	d15, {q11}, d17
+	vmov.i8	q8,#0x55			@ compose .LBS0
+	vmov.i8	q9,#0x33			@ compose .LBS1
+	vshr.u64	q10, q6, #1
+	 vshr.u64	q11, q4, #1
+	veor		q10, q10, q7
+	 veor		q11, q11, q5
+	vand		q10, q10, q8
+	 vand		q11, q11, q8
+	veor		q7, q7, q10
+	vshl.u64	q10, q10, #1
+	 veor		q5, q5, q11
+	 vshl.u64	q11, q11, #1
+	veor		q6, q6, q10
+	 veor		q4, q4, q11
+	vshr.u64	q10, q2, #1
+	 vshr.u64	q11, q0, #1
+	veor		q10, q10, q3
+	 veor		q11, q11, q1
+	vand		q10, q10, q8
+	 vand		q11, q11, q8
+	veor		q3, q3, q10
+	vshl.u64	q10, q10, #1
+	 veor		q1, q1, q11
+	 vshl.u64	q11, q11, #1
+	veor		q2, q2, q10
+	 veor		q0, q0, q11
+	vmov.i8	q8,#0x0f			@ compose .LBS2
+	vshr.u64	q10, q5, #2
+	 vshr.u64	q11, q4, #2
+	veor		q10, q10, q7
+	 veor		q11, q11, q6
+	vand		q10, q10, q9
+	 vand		q11, q11, q9
+	veor		q7, q7, q10
+	vshl.u64	q10, q10, #2
+	 veor		q6, q6, q11
+	 vshl.u64	q11, q11, #2
+	veor		q5, q5, q10
+	 veor		q4, q4, q11
+	vshr.u64	q10, q1, #2
+	 vshr.u64	q11, q0, #2
+	veor		q10, q10, q3
+	 veor		q11, q11, q2
+	vand		q10, q10, q9
+	 vand		q11, q11, q9
+	veor		q3, q3, q10
+	vshl.u64	q10, q10, #2
+	 veor		q2, q2, q11
+	 vshl.u64	q11, q11, #2
+	veor		q1, q1, q10
+	 veor		q0, q0, q11
+	vshr.u64	q10, q3, #4
+	 vshr.u64	q11, q2, #4
+	veor		q10, q10, q7
+	 veor		q11, q11, q6
+	vand		q10, q10, q8
+	 vand		q11, q11, q8
+	veor		q7, q7, q10
+	vshl.u64	q10, q10, #4
+	 veor		q6, q6, q11
+	 vshl.u64	q11, q11, #4
+	veor		q3, q3, q10
+	 veor		q2, q2, q11
+	vshr.u64	q10, q1, #4
+	 vshr.u64	q11, q0, #4
+	veor		q10, q10, q5
+	 veor		q11, q11, q4
+	vand		q10, q10, q8
+	 vand		q11, q11, q8
+	veor		q5, q5, q10
+	vshl.u64	q10, q10, #4
+	 veor		q4, q4, q11
+	 vshl.u64	q11, q11, #4
+	veor		q1, q1, q10
+	 veor		q0, q0, q11
+	sub	r5,r5,#1
+	b	.Ldec_sbox
+.align	4
+.Ldec_loop:
+	vldmia	r4!, {q8-q11}
+	veor	q8, q8, q0
+	veor	q9, q9, q1
+	vtbl.8	d0, {q8}, d24
+	vtbl.8	d1, {q8}, d25
+	vldmia	r4!, {q8}
+	veor	q10, q10, q2
+	vtbl.8	d2, {q9}, d24
+	vtbl.8	d3, {q9}, d25
+	vldmia	r4!, {q9}
+	veor	q11, q11, q3
+	vtbl.8	d4, {q10}, d24
+	vtbl.8	d5, {q10}, d25
+	vldmia	r4!, {q10}
+	vtbl.8	d6, {q11}, d24
+	vtbl.8	d7, {q11}, d25
+	vldmia	r4!, {q11}
+	veor	q8, q8, q4
+	veor	q9, q9, q5
+	vtbl.8	d8, {q8}, d24
+	vtbl.8	d9, {q8}, d25
+	veor	q10, q10, q6
+	vtbl.8	d10, {q9}, d24
+	vtbl.8	d11, {q9}, d25
+	veor	q11, q11, q7
+	vtbl.8	d12, {q10}, d24
+	vtbl.8	d13, {q10}, d25
+	vtbl.8	d14, {q11}, d24
+	vtbl.8	d15, {q11}, d25
+.Ldec_sbox:
+	 veor	q1, q1, q4
+	veor	q3, q3, q4
+
+	veor	q4, q4, q7
+	 veor	q1, q1, q6
+	veor	q2, q2, q7
+	veor	q6, q6, q4
+
+	veor	q0, q0, q1
+	veor	q2, q2, q5
+	 veor	q7, q7, q6
+	veor	q3, q3, q0
+	veor	q5, q5, q0
+	veor	q1, q1, q3
+	veor	q11, q3, q0
+	veor	q10, q7, q4
+	veor	q9, q1, q6
+	veor	q13, q4, q0
+	 vmov	q8, q10
+	veor	q12, q5, q2
+
+	vorr	q10, q10, q9
+	veor	q15, q11, q8
+	vand	q14, q11, q12
+	vorr	q11, q11, q12
+	veor	q12, q12, q9
+	vand	q8, q8, q9
+	veor	q9, q6, q2
+	vand	q15, q15, q12
+	vand	q13, q13, q9
+	veor	q9, q3, q7
+	veor	q12, q1, q5
+	veor	q11, q11, q13
+	veor	q10, q10, q13
+	vand	q13, q9, q12
+	vorr	q9, q9, q12
+	veor	q11, q11, q15
+	veor	q8, q8, q13
+	veor	q10, q10, q14
+	veor	q9, q9, q15
+	veor	q8, q8, q14
+	vand	q12, q4, q6
+	veor	q9, q9, q14
+	vand	q13, q0, q2
+	vand	q14, q7, q1
+	vorr	q15, q3, q5
+	veor	q11, q11, q12
+	veor	q9, q9, q14
+	veor	q8, q8, q15
+	veor	q10, q10, q13
+
+	@ Inv_GF16 	0, 	1, 	2, 	3, s0, s1, s2, s3
+
+	@ new smaller inversion
+
+	vand	q14, q11, q9
+	vmov	q12, q8
+
+	veor	q13, q10, q14
+	veor	q15, q8, q14
+	veor	q14, q8, q14	@ q14=q15
+
+	vbsl	q13, q9, q8
+	vbsl	q15, q11, q10
+	veor	q11, q11, q10
+
+	vbsl	q12, q13, q14
+	vbsl	q8, q14, q13
+
+	vand	q14, q12, q15
+	veor	q9, q9, q8
+
+	veor	q14, q14, q11
+	veor	q12, q5, q2
+	veor	q8, q1, q6
+	veor 	q10, q15, q14
+	vand	q10, q10, q5
+	veor	q5, q5, q1
+	vand	q11, q1, q15
+	vand	q5, q5, q14
+	veor	q1, q11, q10
+	veor	q5, q5, q11
+	veor	q15, q15, q13
+	veor	q14, q14, q9
+	veor	q11, q15, q14
+	 veor 	q10, q13, q9
+	vand	q11, q11, q12
+	 vand	q10, q10, q2
+	veor	q12, q12, q8
+	 veor	q2, q2, q6
+	vand	q8, q8, q15
+	 vand	q6, q6, q13
+	vand	q12, q12, q14
+	 vand	q2, q2, q9
+	veor	q8, q8, q12
+	 veor	q2, q2, q6
+	veor	q12, q12, q11
+	 veor	q6, q6, q10
+	veor	q5, q5, q12
+	veor	q2, q2, q12
+	veor	q1, q1, q8
+	veor	q6, q6, q8
+
+	veor	q12, q3, q0
+	veor	q8, q7, q4
+	veor	q11, q15, q14
+	 veor 	q10, q13, q9
+	vand	q11, q11, q12
+	 vand	q10, q10, q0
+	veor	q12, q12, q8
+	 veor	q0, q0, q4
+	vand	q8, q8, q15
+	 vand	q4, q4, q13
+	vand	q12, q12, q14
+	 vand	q0, q0, q9
+	veor	q8, q8, q12
+	 veor	q0, q0, q4
+	veor	q12, q12, q11
+	 veor	q4, q4, q10
+	veor	q15, q15, q13
+	veor	q14, q14, q9
+	veor 	q10, q15, q14
+	vand	q10, q10, q3
+	veor	q3, q3, q7
+	vand	q11, q7, q15
+	vand	q3, q3, q14
+	veor	q7, q11, q10
+	veor	q3, q3, q11
+	veor	q3, q3, q12
+	veor	q0, q0, q12
+	veor	q7, q7, q8
+	veor	q4, q4, q8
+	veor	q1, q1, q7
+	veor	q6, q6, q5
+
+	veor	q4, q4, q1
+	veor	q2, q2, q7
+	veor	q5, q5, q7
+	veor	q4, q4, q2
+	 veor 	q7, q7, q0
+	veor	q4, q4, q5
+	 veor	q3, q3, q6
+	 veor	q6, q6, q1
+	veor	q3, q3, q4
+
+	veor	q4, q4, q0
+	veor	q7, q7, q3
+	subs	r5,r5,#1
+	bcc	.Ldec_done
+	@ multiplication by 0x05-0x00-0x04-0x00
+	vext.8	q8, q0, q0, #8
+	vext.8	q14, q3, q3, #8
+	vext.8	q15, q5, q5, #8
+	veor	q8, q8, q0
+	vext.8	q9, q1, q1, #8
+	veor	q14, q14, q3
+	vext.8	q10, q6, q6, #8
+	veor	q15, q15, q5
+	vext.8	q11, q4, q4, #8
+	veor	q9, q9, q1
+	vext.8	q12, q2, q2, #8
+	veor	q10, q10, q6
+	vext.8	q13, q7, q7, #8
+	veor	q11, q11, q4
+	veor	q12, q12, q2
+	veor	q13, q13, q7
+
+	 veor	q0, q0, q14
+	 veor	q1, q1, q14
+	 veor	q6, q6, q8
+	 veor	q2, q2, q10
+	 veor	q4, q4, q9
+	 veor	q1, q1, q15
+	 veor	q6, q6, q15
+	 veor	q2, q2, q14
+	 veor	q7, q7, q11
+	 veor	q4, q4, q14
+	 veor	q3, q3, q12
+	 veor	q2, q2, q15
+	 veor	q7, q7, q15
+	 veor	q5, q5, q13
+	vext.8	q8, q0, q0, #12	@ x0 <<< 32
+	vext.8	q9, q1, q1, #12
+	 veor	q0, q0, q8		@ x0 ^ (x0 <<< 32)
+	vext.8	q10, q6, q6, #12
+	 veor	q1, q1, q9
+	vext.8	q11, q4, q4, #12
+	 veor	q6, q6, q10
+	vext.8	q12, q2, q2, #12
+	 veor	q4, q4, q11
+	vext.8	q13, q7, q7, #12
+	 veor	q2, q2, q12
+	vext.8	q14, q3, q3, #12
+	 veor	q7, q7, q13
+	vext.8	q15, q5, q5, #12
+	 veor	q3, q3, q14
+
+	veor	q9, q9, q0
+	 veor	q5, q5, q15
+	 vext.8	q0, q0, q0, #8		@ (x0 ^ (x0 <<< 32)) <<< 64)
+	veor	q10, q10, q1
+	veor	q8, q8, q5
+	veor	q9, q9, q5
+	 vext.8	q1, q1, q1, #8
+	veor	q13, q13, q2
+	 veor	q0, q0, q8
+	veor	q14, q14, q7
+	 veor	q1, q1, q9
+	 vext.8	q8, q2, q2, #8
+	veor	q12, q12, q4
+	 vext.8	q9, q7, q7, #8
+	veor	q15, q15, q3
+	 vext.8	q2, q4, q4, #8
+	veor	q11, q11, q6
+	 vext.8	q7, q5, q5, #8
+	veor	q12, q12, q5
+	 vext.8	q4, q3, q3, #8
+	veor	q11, q11, q5
+	 vext.8	q3, q6, q6, #8
+	veor	q5, q9, q13
+	veor	q11, q11, q2
+	veor	q7, q7, q15
+	veor	q6, q4, q14
+	veor	q4, q8, q12
+	veor	q2, q3, q10
+	vmov	q3, q11
+	 @ vmov	q5, q9
+	vldmia	r6, {q12}		@ .LISR
+	ite	eq				@ Thumb2 thing, sanity check in ARM
+	addeq	r6,r6,#0x10
+	bne	.Ldec_loop
+	vldmia	r6, {q12}		@ .LISRM0
+	b	.Ldec_loop
+.align	4
+.Ldec_done:
+	vmov.i8	q8,#0x55			@ compose .LBS0
+	vmov.i8	q9,#0x33			@ compose .LBS1
+	vshr.u64	q10, q3, #1
+	 vshr.u64	q11, q2, #1
+	veor		q10, q10, q5
+	 veor		q11, q11, q7
+	vand		q10, q10, q8
+	 vand		q11, q11, q8
+	veor		q5, q5, q10
+	vshl.u64	q10, q10, #1
+	 veor		q7, q7, q11
+	 vshl.u64	q11, q11, #1
+	veor		q3, q3, q10
+	 veor		q2, q2, q11
+	vshr.u64	q10, q6, #1
+	 vshr.u64	q11, q0, #1
+	veor		q10, q10, q4
+	 veor		q11, q11, q1
+	vand		q10, q10, q8
+	 vand		q11, q11, q8
+	veor		q4, q4, q10
+	vshl.u64	q10, q10, #1
+	 veor		q1, q1, q11
+	 vshl.u64	q11, q11, #1
+	veor		q6, q6, q10
+	 veor		q0, q0, q11
+	vmov.i8	q8,#0x0f			@ compose .LBS2
+	vshr.u64	q10, q7, #2
+	 vshr.u64	q11, q2, #2
+	veor		q10, q10, q5
+	 veor		q11, q11, q3
+	vand		q10, q10, q9
+	 vand		q11, q11, q9
+	veor		q5, q5, q10
+	vshl.u64	q10, q10, #2
+	 veor		q3, q3, q11
+	 vshl.u64	q11, q11, #2
+	veor		q7, q7, q10
+	 veor		q2, q2, q11
+	vshr.u64	q10, q1, #2
+	 vshr.u64	q11, q0, #2
+	veor		q10, q10, q4
+	 veor		q11, q11, q6
+	vand		q10, q10, q9
+	 vand		q11, q11, q9
+	veor		q4, q4, q10
+	vshl.u64	q10, q10, #2
+	 veor		q6, q6, q11
+	 vshl.u64	q11, q11, #2
+	veor		q1, q1, q10
+	 veor		q0, q0, q11
+	vshr.u64	q10, q4, #4
+	 vshr.u64	q11, q6, #4
+	veor		q10, q10, q5
+	 veor		q11, q11, q3
+	vand		q10, q10, q8
+	 vand		q11, q11, q8
+	veor		q5, q5, q10
+	vshl.u64	q10, q10, #4
+	 veor		q3, q3, q11
+	 vshl.u64	q11, q11, #4
+	veor		q4, q4, q10
+	 veor		q6, q6, q11
+	vshr.u64	q10, q1, #4
+	 vshr.u64	q11, q0, #4
+	veor		q10, q10, q7
+	 veor		q11, q11, q2
+	vand		q10, q10, q8
+	 vand		q11, q11, q8
+	veor		q7, q7, q10
+	vshl.u64	q10, q10, #4
+	 veor		q2, q2, q11
+	 vshl.u64	q11, q11, #4
+	veor		q1, q1, q10
+	 veor		q0, q0, q11
+	vldmia	r4, {q8}			@ last round key
+	veor	q6, q6, q8
+	veor	q4, q4, q8
+	veor	q2, q2, q8
+	veor	q7, q7, q8
+	veor	q3, q3, q8
+	veor	q5, q5, q8
+	veor	q0, q0, q8
+	veor	q1, q1, q8
+	bx	lr
+.size	_bsaes_decrypt8,.-_bsaes_decrypt8
+
+.type	_bsaes_const,%object
+.align	6
+_bsaes_const:
+.LM0ISR:	@ InvShiftRows constants
+	.quad	0x0a0e0206070b0f03, 0x0004080c0d010509
+.LISR:
+	.quad	0x0504070602010003, 0x0f0e0d0c080b0a09
+.LISRM0:
+	.quad	0x01040b0e0205080f, 0x0306090c00070a0d
+.LM0SR:		@ ShiftRows constants
+	.quad	0x0a0e02060f03070b, 0x0004080c05090d01
+.LSR:
+	.quad	0x0504070600030201, 0x0f0e0d0c0a09080b
+.LSRM0:
+	.quad	0x0304090e00050a0f, 0x01060b0c0207080d
+.LM0:
+	.quad	0x02060a0e03070b0f, 0x0004080c0105090d
+.LREVM0SR:
+	.quad	0x090d01050c000408, 0x03070b0f060a0e02
+.asciz	"Bit-sliced AES for NEON, CRYPTOGAMS by <appro@openssl.org>"
+.align	6
+.size	_bsaes_const,.-_bsaes_const
+
+.type	_bsaes_encrypt8,%function
+.align	4
+_bsaes_encrypt8:
+	adr	r6,_bsaes_encrypt8
+	vldmia	r4!, {q9}		@ round 0 key
+	sub	r6,r6,#_bsaes_encrypt8-.LM0SR
+
+	vldmia	r6!, {q8}		@ .LM0SR
+_bsaes_encrypt8_alt:
+	veor	q10, q0, q9	@ xor with round0 key
+	veor	q11, q1, q9
+	 vtbl.8	d0, {q10}, d16
+	 vtbl.8	d1, {q10}, d17
+	veor	q12, q2, q9
+	 vtbl.8	d2, {q11}, d16
+	 vtbl.8	d3, {q11}, d17
+	veor	q13, q3, q9
+	 vtbl.8	d4, {q12}, d16
+	 vtbl.8	d5, {q12}, d17
+	veor	q14, q4, q9
+	 vtbl.8	d6, {q13}, d16
+	 vtbl.8	d7, {q13}, d17
+	veor	q15, q5, q9
+	 vtbl.8	d8, {q14}, d16
+	 vtbl.8	d9, {q14}, d17
+	veor	q10, q6, q9
+	 vtbl.8	d10, {q15}, d16
+	 vtbl.8	d11, {q15}, d17
+	veor	q11, q7, q9
+	 vtbl.8	d12, {q10}, d16
+	 vtbl.8	d13, {q10}, d17
+	 vtbl.8	d14, {q11}, d16
+	 vtbl.8	d15, {q11}, d17
+_bsaes_encrypt8_bitslice:
+	vmov.i8	q8,#0x55			@ compose .LBS0
+	vmov.i8	q9,#0x33			@ compose .LBS1
+	vshr.u64	q10, q6, #1
+	 vshr.u64	q11, q4, #1
+	veor		q10, q10, q7
+	 veor		q11, q11, q5
+	vand		q10, q10, q8
+	 vand		q11, q11, q8
+	veor		q7, q7, q10
+	vshl.u64	q10, q10, #1
+	 veor		q5, q5, q11
+	 vshl.u64	q11, q11, #1
+	veor		q6, q6, q10
+	 veor		q4, q4, q11
+	vshr.u64	q10, q2, #1
+	 vshr.u64	q11, q0, #1
+	veor		q10, q10, q3
+	 veor		q11, q11, q1
+	vand		q10, q10, q8
+	 vand		q11, q11, q8
+	veor		q3, q3, q10
+	vshl.u64	q10, q10, #1
+	 veor		q1, q1, q11
+	 vshl.u64	q11, q11, #1
+	veor		q2, q2, q10
+	 veor		q0, q0, q11
+	vmov.i8	q8,#0x0f			@ compose .LBS2
+	vshr.u64	q10, q5, #2
+	 vshr.u64	q11, q4, #2
+	veor		q10, q10, q7
+	 veor		q11, q11, q6
+	vand		q10, q10, q9
+	 vand		q11, q11, q9
+	veor		q7, q7, q10
+	vshl.u64	q10, q10, #2
+	 veor		q6, q6, q11
+	 vshl.u64	q11, q11, #2
+	veor		q5, q5, q10
+	 veor		q4, q4, q11
+	vshr.u64	q10, q1, #2
+	 vshr.u64	q11, q0, #2
+	veor		q10, q10, q3
+	 veor		q11, q11, q2
+	vand		q10, q10, q9
+	 vand		q11, q11, q9
+	veor		q3, q3, q10
+	vshl.u64	q10, q10, #2
+	 veor		q2, q2, q11
+	 vshl.u64	q11, q11, #2
+	veor		q1, q1, q10
+	 veor		q0, q0, q11
+	vshr.u64	q10, q3, #4
+	 vshr.u64	q11, q2, #4
+	veor		q10, q10, q7
+	 veor		q11, q11, q6
+	vand		q10, q10, q8
+	 vand		q11, q11, q8
+	veor		q7, q7, q10
+	vshl.u64	q10, q10, #4
+	 veor		q6, q6, q11
+	 vshl.u64	q11, q11, #4
+	veor		q3, q3, q10
+	 veor		q2, q2, q11
+	vshr.u64	q10, q1, #4
+	 vshr.u64	q11, q0, #4
+	veor		q10, q10, q5
+	 veor		q11, q11, q4
+	vand		q10, q10, q8
+	 vand		q11, q11, q8
+	veor		q5, q5, q10
+	vshl.u64	q10, q10, #4
+	 veor		q4, q4, q11
+	 vshl.u64	q11, q11, #4
+	veor		q1, q1, q10
+	 veor		q0, q0, q11
+	sub	r5,r5,#1
+	b	.Lenc_sbox
+.align	4
+.Lenc_loop:
+	vldmia	r4!, {q8-q11}
+	veor	q8, q8, q0
+	veor	q9, q9, q1
+	vtbl.8	d0, {q8}, d24
+	vtbl.8	d1, {q8}, d25
+	vldmia	r4!, {q8}
+	veor	q10, q10, q2
+	vtbl.8	d2, {q9}, d24
+	vtbl.8	d3, {q9}, d25
+	vldmia	r4!, {q9}
+	veor	q11, q11, q3
+	vtbl.8	d4, {q10}, d24
+	vtbl.8	d5, {q10}, d25
+	vldmia	r4!, {q10}
+	vtbl.8	d6, {q11}, d24
+	vtbl.8	d7, {q11}, d25
+	vldmia	r4!, {q11}
+	veor	q8, q8, q4
+	veor	q9, q9, q5
+	vtbl.8	d8, {q8}, d24
+	vtbl.8	d9, {q8}, d25
+	veor	q10, q10, q6
+	vtbl.8	d10, {q9}, d24
+	vtbl.8	d11, {q9}, d25
+	veor	q11, q11, q7
+	vtbl.8	d12, {q10}, d24
+	vtbl.8	d13, {q10}, d25
+	vtbl.8	d14, {q11}, d24
+	vtbl.8	d15, {q11}, d25
+.Lenc_sbox:
+	veor	q2, q2, q1
+	veor	q5, q5, q6
+	veor	q3, q3, q0
+	veor	q6, q6, q2
+	veor	q5, q5, q0
+
+	veor	q6, q6, q3
+	veor	q3, q3, q7
+	veor	q7, q7, q5
+	veor	q3, q3, q4
+	veor	q4, q4, q5
+
+	veor	q2, q2, q7
+	veor	q3, q3, q1
+	veor	q1, q1, q5
+	veor	q11, q7, q4
+	veor	q10, q1, q2
+	veor	q9, q5, q3
+	veor	q13, q2, q4
+	 vmov	q8, q10
+	veor	q12, q6, q0
+
+	vorr	q10, q10, q9
+	veor	q15, q11, q8
+	vand	q14, q11, q12
+	vorr	q11, q11, q12
+	veor	q12, q12, q9
+	vand	q8, q8, q9
+	veor	q9, q3, q0
+	vand	q15, q15, q12
+	vand	q13, q13, q9
+	veor	q9, q7, q1
+	veor	q12, q5, q6
+	veor	q11, q11, q13
+	veor	q10, q10, q13
+	vand	q13, q9, q12
+	vorr	q9, q9, q12
+	veor	q11, q11, q15
+	veor	q8, q8, q13
+	veor	q10, q10, q14
+	veor	q9, q9, q15
+	veor	q8, q8, q14
+	vand	q12, q2, q3
+	veor	q9, q9, q14
+	vand	q13, q4, q0
+	vand	q14, q1, q5
+	vorr	q15, q7, q6
+	veor	q11, q11, q12
+	veor	q9, q9, q14
+	veor	q8, q8, q15
+	veor	q10, q10, q13
+
+	@ Inv_GF16 	0, 	1, 	2, 	3, s0, s1, s2, s3
+
+	@ new smaller inversion
+
+	vand	q14, q11, q9
+	vmov	q12, q8
+
+	veor	q13, q10, q14
+	veor	q15, q8, q14
+	veor	q14, q8, q14	@ q14=q15
+
+	vbsl	q13, q9, q8
+	vbsl	q15, q11, q10
+	veor	q11, q11, q10
+
+	vbsl	q12, q13, q14
+	vbsl	q8, q14, q13
+
+	vand	q14, q12, q15
+	veor	q9, q9, q8
+
+	veor	q14, q14, q11
+	veor	q12, q6, q0
+	veor	q8, q5, q3
+	veor 	q10, q15, q14
+	vand	q10, q10, q6
+	veor	q6, q6, q5
+	vand	q11, q5, q15
+	vand	q6, q6, q14
+	veor	q5, q11, q10
+	veor	q6, q6, q11
+	veor	q15, q15, q13
+	veor	q14, q14, q9
+	veor	q11, q15, q14
+	 veor 	q10, q13, q9
+	vand	q11, q11, q12
+	 vand	q10, q10, q0
+	veor	q12, q12, q8
+	 veor	q0, q0, q3
+	vand	q8, q8, q15
+	 vand	q3, q3, q13
+	vand	q12, q12, q14
+	 vand	q0, q0, q9
+	veor	q8, q8, q12
+	 veor	q0, q0, q3
+	veor	q12, q12, q11
+	 veor	q3, q3, q10
+	veor	q6, q6, q12
+	veor	q0, q0, q12
+	veor	q5, q5, q8
+	veor	q3, q3, q8
+
+	veor	q12, q7, q4
+	veor	q8, q1, q2
+	veor	q11, q15, q14
+	 veor 	q10, q13, q9
+	vand	q11, q11, q12
+	 vand	q10, q10, q4
+	veor	q12, q12, q8
+	 veor	q4, q4, q2
+	vand	q8, q8, q15
+	 vand	q2, q2, q13
+	vand	q12, q12, q14
+	 vand	q4, q4, q9
+	veor	q8, q8, q12
+	 veor	q4, q4, q2
+	veor	q12, q12, q11
+	 veor	q2, q2, q10
+	veor	q15, q15, q13
+	veor	q14, q14, q9
+	veor 	q10, q15, q14
+	vand	q10, q10, q7
+	veor	q7, q7, q1
+	vand	q11, q1, q15
+	vand	q7, q7, q14
+	veor	q1, q11, q10
+	veor	q7, q7, q11
+	veor	q7, q7, q12
+	veor	q4, q4, q12
+	veor	q1, q1, q8
+	veor	q2, q2, q8
+	veor	q7, q7, q0
+	veor	q1, q1, q6
+	veor	q6, q6, q0
+	veor	q4, q4, q7
+	veor	q0, q0, q1
+
+	veor	q1, q1, q5
+	veor	q5, q5, q2
+	veor	q2, q2, q3
+	veor	q3, q3, q5
+	veor	q4, q4, q5
+
+	veor	q6, q6, q3
+	subs	r5,r5,#1
+	bcc	.Lenc_done
+	vext.8	q8, q0, q0, #12	@ x0 <<< 32
+	vext.8	q9, q1, q1, #12
+	 veor	q0, q0, q8		@ x0 ^ (x0 <<< 32)
+	vext.8	q10, q4, q4, #12
+	 veor	q1, q1, q9
+	vext.8	q11, q6, q6, #12
+	 veor	q4, q4, q10
+	vext.8	q12, q3, q3, #12
+	 veor	q6, q6, q11
+	vext.8	q13, q7, q7, #12
+	 veor	q3, q3, q12
+	vext.8	q14, q2, q2, #12
+	 veor	q7, q7, q13
+	vext.8	q15, q5, q5, #12
+	 veor	q2, q2, q14
+
+	veor	q9, q9, q0
+	 veor	q5, q5, q15
+	 vext.8	q0, q0, q0, #8		@ (x0 ^ (x0 <<< 32)) <<< 64)
+	veor	q10, q10, q1
+	veor	q8, q8, q5
+	veor	q9, q9, q5
+	 vext.8	q1, q1, q1, #8
+	veor	q13, q13, q3
+	 veor	q0, q0, q8
+	veor	q14, q14, q7
+	 veor	q1, q1, q9
+	 vext.8	q8, q3, q3, #8
+	veor	q12, q12, q6
+	 vext.8	q9, q7, q7, #8
+	veor	q15, q15, q2
+	 vext.8	q3, q6, q6, #8
+	veor	q11, q11, q4
+	 vext.8	q7, q5, q5, #8
+	veor	q12, q12, q5
+	 vext.8	q6, q2, q2, #8
+	veor	q11, q11, q5
+	 vext.8	q2, q4, q4, #8
+	veor	q5, q9, q13
+	veor	q4, q8, q12
+	veor	q3, q3, q11
+	veor	q7, q7, q15
+	veor	q6, q6, q14
+	 @ vmov	q4, q8
+	veor	q2, q2, q10
+	 @ vmov	q5, q9
+	vldmia	r6, {q12}		@ .LSR
+	ite	eq				@ Thumb2 thing, samity check in ARM
+	addeq	r6,r6,#0x10
+	bne	.Lenc_loop
+	vldmia	r6, {q12}		@ .LSRM0
+	b	.Lenc_loop
+.align	4
+.Lenc_done:
+	vmov.i8	q8,#0x55			@ compose .LBS0
+	vmov.i8	q9,#0x33			@ compose .LBS1
+	vshr.u64	q10, q2, #1
+	 vshr.u64	q11, q3, #1
+	veor		q10, q10, q5
+	 veor		q11, q11, q7
+	vand		q10, q10, q8
+	 vand		q11, q11, q8
+	veor		q5, q5, q10
+	vshl.u64	q10, q10, #1
+	 veor		q7, q7, q11
+	 vshl.u64	q11, q11, #1
+	veor		q2, q2, q10
+	 veor		q3, q3, q11
+	vshr.u64	q10, q4, #1
+	 vshr.u64	q11, q0, #1
+	veor		q10, q10, q6
+	 veor		q11, q11, q1
+	vand		q10, q10, q8
+	 vand		q11, q11, q8
+	veor		q6, q6, q10
+	vshl.u64	q10, q10, #1
+	 veor		q1, q1, q11
+	 vshl.u64	q11, q11, #1
+	veor		q4, q4, q10
+	 veor		q0, q0, q11
+	vmov.i8	q8,#0x0f			@ compose .LBS2
+	vshr.u64	q10, q7, #2
+	 vshr.u64	q11, q3, #2
+	veor		q10, q10, q5
+	 veor		q11, q11, q2
+	vand		q10, q10, q9
+	 vand		q11, q11, q9
+	veor		q5, q5, q10
+	vshl.u64	q10, q10, #2
+	 veor		q2, q2, q11
+	 vshl.u64	q11, q11, #2
+	veor		q7, q7, q10
+	 veor		q3, q3, q11
+	vshr.u64	q10, q1, #2
+	 vshr.u64	q11, q0, #2
+	veor		q10, q10, q6
+	 veor		q11, q11, q4
+	vand		q10, q10, q9
+	 vand		q11, q11, q9
+	veor		q6, q6, q10
+	vshl.u64	q10, q10, #2
+	 veor		q4, q4, q11
+	 vshl.u64	q11, q11, #2
+	veor		q1, q1, q10
+	 veor		q0, q0, q11
+	vshr.u64	q10, q6, #4
+	 vshr.u64	q11, q4, #4
+	veor		q10, q10, q5
+	 veor		q11, q11, q2
+	vand		q10, q10, q8
+	 vand		q11, q11, q8
+	veor		q5, q5, q10
+	vshl.u64	q10, q10, #4
+	 veor		q2, q2, q11
+	 vshl.u64	q11, q11, #4
+	veor		q6, q6, q10
+	 veor		q4, q4, q11
+	vshr.u64	q10, q1, #4
+	 vshr.u64	q11, q0, #4
+	veor		q10, q10, q7
+	 veor		q11, q11, q3
+	vand		q10, q10, q8
+	 vand		q11, q11, q8
+	veor		q7, q7, q10
+	vshl.u64	q10, q10, #4
+	 veor		q3, q3, q11
+	 vshl.u64	q11, q11, #4
+	veor		q1, q1, q10
+	 veor		q0, q0, q11
+	vldmia	r4, {q8}			@ last round key
+	veor	q4, q4, q8
+	veor	q6, q6, q8
+	veor	q3, q3, q8
+	veor	q7, q7, q8
+	veor	q2, q2, q8
+	veor	q5, q5, q8
+	veor	q0, q0, q8
+	veor	q1, q1, q8
+	bx	lr
+.size	_bsaes_encrypt8,.-_bsaes_encrypt8
+.type	_bsaes_key_convert,%function
+.align	4
+_bsaes_key_convert:
+	adr	r6,_bsaes_key_convert
+	vld1.8	{q7},  [r4]!		@ load round 0 key
+	sub	r6,r6,#_bsaes_key_convert-.LM0
+	vld1.8	{q15}, [r4]!		@ load round 1 key
+
+	vmov.i8	q8,  #0x01			@ bit masks
+	vmov.i8	q9,  #0x02
+	vmov.i8	q10, #0x04
+	vmov.i8	q11, #0x08
+	vmov.i8	q12, #0x10
+	vmov.i8	q13, #0x20
+	vldmia	r6, {q14}		@ .LM0
+
+#ifdef __ARMEL__
+	vrev32.8	q7,  q7
+	vrev32.8	q15, q15
+#endif
+	sub	r5,r5,#1
+	vstmia	r12!, {q7}		@ save round 0 key
+	b	.Lkey_loop
+
+.align	4
+.Lkey_loop:
+	vtbl.8	d14,{q15},d28
+	vtbl.8	d15,{q15},d29
+	vmov.i8	q6,  #0x40
+	vmov.i8	q15, #0x80
+
+	vtst.8	q0, q7, q8
+	vtst.8	q1, q7, q9
+	vtst.8	q2, q7, q10
+	vtst.8	q3, q7, q11
+	vtst.8	q4, q7, q12
+	vtst.8	q5, q7, q13
+	vtst.8	q6, q7, q6
+	vtst.8	q7, q7, q15
+	vld1.8	{q15}, [r4]!		@ load next round key
+	vmvn	q0, q0		@ "pnot"
+	vmvn	q1, q1
+	vmvn	q5, q5
+	vmvn	q6, q6
+#ifdef __ARMEL__
+	vrev32.8	q15, q15
+#endif
+	subs	r5,r5,#1
+	vstmia	r12!,{q0-q7}		@ write bit-sliced round key
+	bne	.Lkey_loop
+
+	vmov.i8	q7,#0x63			@ compose .L63
+	@ don't save last round key
+	bx	lr
+.size	_bsaes_key_convert,.-_bsaes_key_convert
+.extern AES_cbc_encrypt
+.extern AES_decrypt
+
+.global	bsaes_cbc_encrypt
+.type	bsaes_cbc_encrypt,%function
+.align	5
+bsaes_cbc_encrypt:
+#ifndef	__KERNEL__
+	cmp	r2, #128
+#ifndef	__thumb__
+	blo	AES_cbc_encrypt
+#else
+	bhs	1f
+	b	AES_cbc_encrypt
+1:
+#endif
+#endif
+
+	@ it is up to the caller to make sure we are called with enc == 0
+
+	mov	ip, sp
+	stmdb	sp!, {r4-r10, lr}
+	VFP_ABI_PUSH
+	ldr	r8, [ip]			@ IV is 1st arg on the stack
+	mov	r2, r2, lsr#4		@ len in 16 byte blocks
+	sub	sp, #0x10			@ scratch space to carry over the IV
+	mov	r9, sp				@ save sp
+
+	ldr	r10, [r3, #240]		@ get # of rounds
+#ifndef	BSAES_ASM_EXTENDED_KEY
+	@ allocate the key schedule on the stack
+	sub	r12, sp, r10, lsl#7		@ 128 bytes per inner round key
+	add	r12, #96			@ sifze of bit-slices key schedule
+
+	@ populate the key schedule
+	mov	r4, r3			@ pass key
+	mov	r5, r10			@ pass # of rounds
+	mov	sp, r12				@ sp is sp
+	bl	_bsaes_key_convert
+	vldmia	sp, {q6}
+	vstmia	r12,  {q15}		@ save last round key
+	veor	q7, q7, q6	@ fix up round 0 key
+	vstmia	sp, {q7}
+#else
+	ldr	r12, [r3, #244]
+	eors	r12, #1
+	beq	0f
+
+	@ populate the key schedule
+	str	r12, [r3, #244]
+	mov	r4, r3			@ pass key
+	mov	r5, r10			@ pass # of rounds
+	add	r12, r3, #248			@ pass key schedule
+	bl	_bsaes_key_convert
+	add	r4, r3, #248
+	vldmia	r4, {q6}
+	vstmia	r12, {q15}			@ save last round key
+	veor	q7, q7, q6	@ fix up round 0 key
+	vstmia	r4, {q7}
+
+.align	2
+0:
+#endif
+
+	vld1.8	{q15}, [r8]		@ load IV
+	b	.Lcbc_dec_loop
+
+.align	4
+.Lcbc_dec_loop:
+	subs	r2, r2, #0x8
+	bmi	.Lcbc_dec_loop_finish
+
+	vld1.8	{q0-q1}, [r0]!	@ load input
+	vld1.8	{q2-q3}, [r0]!
+#ifndef	BSAES_ASM_EXTENDED_KEY
+	mov	r4, sp			@ pass the key
+#else
+	add	r4, r3, #248
+#endif
+	vld1.8	{q4-q5}, [r0]!
+	mov	r5, r10
+	vld1.8	{q6-q7}, [r0]
+	sub	r0, r0, #0x60
+	vstmia	r9, {q15}			@ put aside IV
+
+	bl	_bsaes_decrypt8
+
+	vldmia	r9, {q14}			@ reload IV
+	vld1.8	{q8-q9}, [r0]!	@ reload input
+	veor	q0, q0, q14	@ ^= IV
+	vld1.8	{q10-q11}, [r0]!
+	veor	q1, q1, q8
+	veor	q6, q6, q9
+	vld1.8	{q12-q13}, [r0]!
+	veor	q4, q4, q10
+	veor	q2, q2, q11
+	vld1.8	{q14-q15}, [r0]!
+	veor	q7, q7, q12
+	vst1.8	{q0-q1}, [r1]!	@ write output
+	veor	q3, q3, q13
+	vst1.8	{q6}, [r1]!
+	veor	q5, q5, q14
+	vst1.8	{q4}, [r1]!
+	vst1.8	{q2}, [r1]!
+	vst1.8	{q7}, [r1]!
+	vst1.8	{q3}, [r1]!
+	vst1.8	{q5}, [r1]!
+
+	b	.Lcbc_dec_loop
+
+.Lcbc_dec_loop_finish:
+	adds	r2, r2, #8
+	beq	.Lcbc_dec_done
+
+	vld1.8	{q0}, [r0]!		@ load input
+	cmp	r2, #2
+	blo	.Lcbc_dec_one
+	vld1.8	{q1}, [r0]!
+#ifndef	BSAES_ASM_EXTENDED_KEY
+	mov	r4, sp			@ pass the key
+#else
+	add	r4, r3, #248
+#endif
+	mov	r5, r10
+	vstmia	r9, {q15}			@ put aside IV
+	beq	.Lcbc_dec_two
+	vld1.8	{q2}, [r0]!
+	cmp	r2, #4
+	blo	.Lcbc_dec_three
+	vld1.8	{q3}, [r0]!
+	beq	.Lcbc_dec_four
+	vld1.8	{q4}, [r0]!
+	cmp	r2, #6
+	blo	.Lcbc_dec_five
+	vld1.8	{q5}, [r0]!
+	beq	.Lcbc_dec_six
+	vld1.8	{q6}, [r0]!
+	sub	r0, r0, #0x70
+
+	bl	_bsaes_decrypt8
+
+	vldmia	r9, {q14}			@ reload IV
+	vld1.8	{q8-q9}, [r0]!	@ reload input
+	veor	q0, q0, q14	@ ^= IV
+	vld1.8	{q10-q11}, [r0]!
+	veor	q1, q1, q8
+	veor	q6, q6, q9
+	vld1.8	{q12-q13}, [r0]!
+	veor	q4, q4, q10
+	veor	q2, q2, q11
+	vld1.8	{q15}, [r0]!
+	veor	q7, q7, q12
+	vst1.8	{q0-q1}, [r1]!	@ write output
+	veor	q3, q3, q13
+	vst1.8	{q6}, [r1]!
+	vst1.8	{q4}, [r1]!
+	vst1.8	{q2}, [r1]!
+	vst1.8	{q7}, [r1]!
+	vst1.8	{q3}, [r1]!
+	b	.Lcbc_dec_done
+.align	4
+.Lcbc_dec_six:
+	sub	r0, r0, #0x60
+	bl	_bsaes_decrypt8
+	vldmia	r9,{q14}			@ reload IV
+	vld1.8	{q8-q9}, [r0]!	@ reload input
+	veor	q0, q0, q14	@ ^= IV
+	vld1.8	{q10-q11}, [r0]!
+	veor	q1, q1, q8
+	veor	q6, q6, q9
+	vld1.8	{q12}, [r0]!
+	veor	q4, q4, q10
+	veor	q2, q2, q11
+	vld1.8	{q15}, [r0]!
+	veor	q7, q7, q12
+	vst1.8	{q0-q1}, [r1]!	@ write output
+	vst1.8	{q6}, [r1]!
+	vst1.8	{q4}, [r1]!
+	vst1.8	{q2}, [r1]!
+	vst1.8	{q7}, [r1]!
+	b	.Lcbc_dec_done
+.align	4
+.Lcbc_dec_five:
+	sub	r0, r0, #0x50
+	bl	_bsaes_decrypt8
+	vldmia	r9, {q14}			@ reload IV
+	vld1.8	{q8-q9}, [r0]!	@ reload input
+	veor	q0, q0, q14	@ ^= IV
+	vld1.8	{q10-q11}, [r0]!
+	veor	q1, q1, q8
+	veor	q6, q6, q9
+	vld1.8	{q15}, [r0]!
+	veor	q4, q4, q10
+	vst1.8	{q0-q1}, [r1]!	@ write output
+	veor	q2, q2, q11
+	vst1.8	{q6}, [r1]!
+	vst1.8	{q4}, [r1]!
+	vst1.8	{q2}, [r1]!
+	b	.Lcbc_dec_done
+.align	4
+.Lcbc_dec_four:
+	sub	r0, r0, #0x40
+	bl	_bsaes_decrypt8
+	vldmia	r9, {q14}			@ reload IV
+	vld1.8	{q8-q9}, [r0]!	@ reload input
+	veor	q0, q0, q14	@ ^= IV
+	vld1.8	{q10}, [r0]!
+	veor	q1, q1, q8
+	veor	q6, q6, q9
+	vld1.8	{q15}, [r0]!
+	veor	q4, q4, q10
+	vst1.8	{q0-q1}, [r1]!	@ write output
+	vst1.8	{q6}, [r1]!
+	vst1.8	{q4}, [r1]!
+	b	.Lcbc_dec_done
+.align	4
+.Lcbc_dec_three:
+	sub	r0, r0, #0x30
+	bl	_bsaes_decrypt8
+	vldmia	r9, {q14}			@ reload IV
+	vld1.8	{q8-q9}, [r0]!	@ reload input
+	veor	q0, q0, q14	@ ^= IV
+	vld1.8	{q15}, [r0]!
+	veor	q1, q1, q8
+	veor	q6, q6, q9
+	vst1.8	{q0-q1}, [r1]!	@ write output
+	vst1.8	{q6}, [r1]!
+	b	.Lcbc_dec_done
+.align	4
+.Lcbc_dec_two:
+	sub	r0, r0, #0x20
+	bl	_bsaes_decrypt8
+	vldmia	r9, {q14}			@ reload IV
+	vld1.8	{q8}, [r0]!		@ reload input
+	veor	q0, q0, q14	@ ^= IV
+	vld1.8	{q15}, [r0]!		@ reload input
+	veor	q1, q1, q8
+	vst1.8	{q0-q1}, [r1]!	@ write output
+	b	.Lcbc_dec_done
+.align	4
+.Lcbc_dec_one:
+	sub	r0, r0, #0x10
+	mov	r10, r1			@ save original out pointer
+	mov	r1, r9			@ use the iv scratch space as out buffer
+	mov	r2, r3
+	vmov	q4,q15		@ just in case ensure that IV
+	vmov	q5,q0			@ and input are preserved
+	bl	AES_decrypt
+	vld1.8	{q0}, [r9,:64]		@ load result
+	veor	q0, q0, q4	@ ^= IV
+	vmov	q15, q5		@ q5 holds input
+	vst1.8	{q0}, [r10]		@ write output
+
+.Lcbc_dec_done:
+#ifndef	BSAES_ASM_EXTENDED_KEY
+	vmov.i32	q0, #0
+	vmov.i32	q1, #0
+.Lcbc_dec_bzero:				@ wipe key schedule [if any]
+	vstmia		sp!, {q0-q1}
+	cmp		sp, r9
+	bne		.Lcbc_dec_bzero
+#endif
+
+	mov	sp, r9
+	add	sp, #0x10			@ add sp,r9,#0x10 is no good for thumb
+	vst1.8	{q15}, [r8]		@ return IV
+	VFP_ABI_POP
+	ldmia	sp!, {r4-r10, pc}
+.size	bsaes_cbc_encrypt,.-bsaes_cbc_encrypt
+.extern	AES_encrypt
+.global	bsaes_ctr32_encrypt_blocks
+.type	bsaes_ctr32_encrypt_blocks,%function
+.align	5
+bsaes_ctr32_encrypt_blocks:
+	cmp	r2, #8			@ use plain AES for
+	blo	.Lctr_enc_short			@ small sizes
+
+	mov	ip, sp
+	stmdb	sp!, {r4-r10, lr}
+	VFP_ABI_PUSH
+	ldr	r8, [ip]			@ ctr is 1st arg on the stack
+	sub	sp, sp, #0x10			@ scratch space to carry over the ctr
+	mov	r9, sp				@ save sp
+
+	ldr	r10, [r3, #240]		@ get # of rounds
+#ifndef	BSAES_ASM_EXTENDED_KEY
+	@ allocate the key schedule on the stack
+	sub	r12, sp, r10, lsl#7		@ 128 bytes per inner round key
+	add	r12, #96			@ size of bit-sliced key schedule
+
+	@ populate the key schedule
+	mov	r4, r3			@ pass key
+	mov	r5, r10			@ pass # of rounds
+	mov	sp, r12				@ sp is sp
+	bl	_bsaes_key_convert
+	veor	q7,q7,q15	@ fix up last round key
+	vstmia	r12, {q7}			@ save last round key
+
+	vld1.8	{q0}, [r8]		@ load counter
+	add	r8, r6, #.LREVM0SR-.LM0	@ borrow r8
+	vldmia	sp, {q4}		@ load round0 key
+#else
+	ldr	r12, [r3, #244]
+	eors	r12, #1
+	beq	0f
+
+	@ populate the key schedule
+	str	r12, [r3, #244]
+	mov	r4, r3			@ pass key
+	mov	r5, r10			@ pass # of rounds
+	add	r12, r3, #248			@ pass key schedule
+	bl	_bsaes_key_convert
+	veor	q7,q7,q15	@ fix up last round key
+	vstmia	r12, {q7}			@ save last round key
+
+.align	2
+0:	add	r12, r3, #248
+	vld1.8	{q0}, [r8]		@ load counter
+	adrl	r8, .LREVM0SR			@ borrow r8
+	vldmia	r12, {q4}			@ load round0 key
+	sub	sp, #0x10			@ place for adjusted round0 key
+#endif
+
+	vmov.i32	q8,#1		@ compose 1<<96
+	veor		q9,q9,q9
+	vrev32.8	q0,q0
+	vext.8		q8,q9,q8,#4
+	vrev32.8	q4,q4
+	vadd.u32	q9,q8,q8	@ compose 2<<96
+	vstmia	sp, {q4}		@ save adjusted round0 key
+	b	.Lctr_enc_loop
+
+.align	4
+.Lctr_enc_loop:
+	vadd.u32	q10, q8, q9	@ compose 3<<96
+	vadd.u32	q1, q0, q8	@ +1
+	vadd.u32	q2, q0, q9	@ +2
+	vadd.u32	q3, q0, q10	@ +3
+	vadd.u32	q4, q1, q10
+	vadd.u32	q5, q2, q10
+	vadd.u32	q6, q3, q10
+	vadd.u32	q7, q4, q10
+	vadd.u32	q10, q5, q10	@ next counter
+
+	@ Borrow prologue from _bsaes_encrypt8 to use the opportunity
+	@ to flip byte order in 32-bit counter
+
+	vldmia		sp, {q9}		@ load round0 key
+#ifndef	BSAES_ASM_EXTENDED_KEY
+	add		r4, sp, #0x10		@ pass next round key
+#else
+	add		r4, r3, #264
+#endif
+	vldmia		r8, {q8}			@ .LREVM0SR
+	mov		r5, r10			@ pass rounds
+	vstmia		r9, {q10}			@ save next counter
+	sub		r6, r8, #.LREVM0SR-.LSR	@ pass constants
+
+	bl		_bsaes_encrypt8_alt
+
+	subs		r2, r2, #8
+	blo		.Lctr_enc_loop_done
+
+	vld1.8		{q8-q9}, [r0]!	@ load input
+	vld1.8		{q10-q11}, [r0]!
+	veor		q0, q8
+	veor		q1, q9
+	vld1.8		{q12-q13}, [r0]!
+	veor		q4, q10
+	veor		q6, q11
+	vld1.8		{q14-q15}, [r0]!
+	veor		q3, q12
+	vst1.8		{q0-q1}, [r1]!	@ write output
+	veor		q7, q13
+	veor		q2, q14
+	vst1.8		{q4}, [r1]!
+	veor		q5, q15
+	vst1.8		{q6}, [r1]!
+	vmov.i32	q8, #1			@ compose 1<<96
+	vst1.8		{q3}, [r1]!
+	veor		q9, q9, q9
+	vst1.8		{q7}, [r1]!
+	vext.8		q8, q9, q8, #4
+	vst1.8		{q2}, [r1]!
+	vadd.u32	q9,q8,q8		@ compose 2<<96
+	vst1.8		{q5}, [r1]!
+	vldmia		r9, {q0}			@ load counter
+
+	bne		.Lctr_enc_loop
+	b		.Lctr_enc_done
+
+.align	4
+.Lctr_enc_loop_done:
+	add		r2, r2, #8
+	vld1.8		{q8}, [r0]!	@ load input
+	veor		q0, q8
+	vst1.8		{q0}, [r1]!	@ write output
+	cmp		r2, #2
+	blo		.Lctr_enc_done
+	vld1.8		{q9}, [r0]!
+	veor		q1, q9
+	vst1.8		{q1}, [r1]!
+	beq		.Lctr_enc_done
+	vld1.8		{q10}, [r0]!
+	veor		q4, q10
+	vst1.8		{q4}, [r1]!
+	cmp		r2, #4
+	blo		.Lctr_enc_done
+	vld1.8		{q11}, [r0]!
+	veor		q6, q11
+	vst1.8		{q6}, [r1]!
+	beq		.Lctr_enc_done
+	vld1.8		{q12}, [r0]!
+	veor		q3, q12
+	vst1.8		{q3}, [r1]!
+	cmp		r2, #6
+	blo		.Lctr_enc_done
+	vld1.8		{q13}, [r0]!
+	veor		q7, q13
+	vst1.8		{q7}, [r1]!
+	beq		.Lctr_enc_done
+	vld1.8		{q14}, [r0]
+	veor		q2, q14
+	vst1.8		{q2}, [r1]!
+
+.Lctr_enc_done:
+	vmov.i32	q0, #0
+	vmov.i32	q1, #0
+#ifndef	BSAES_ASM_EXTENDED_KEY
+.Lctr_enc_bzero:			@ wipe key schedule [if any]
+	vstmia		sp!, {q0-q1}
+	cmp		sp, r9
+	bne		.Lctr_enc_bzero
+#else
+	vstmia		sp, {q0-q1}
+#endif
+
+	mov	sp, r9
+	add	sp, #0x10		@ add sp,r9,#0x10 is no good for thumb
+	VFP_ABI_POP
+	ldmia	sp!, {r4-r10, pc}	@ return
+
+.align	4
+.Lctr_enc_short:
+	ldr	ip, [sp]		@ ctr pointer is passed on stack
+	stmdb	sp!, {r4-r8, lr}
+
+	mov	r4, r0		@ copy arguments
+	mov	r5, r1
+	mov	r6, r2
+	mov	r7, r3
+	ldr	r8, [ip, #12]		@ load counter LSW
+	vld1.8	{q1}, [ip]		@ load whole counter value
+#ifdef __ARMEL__
+	rev	r8, r8
+#endif
+	sub	sp, sp, #0x10
+	vst1.8	{q1}, [sp,:64]	@ copy counter value
+	sub	sp, sp, #0x10
+
+.Lctr_enc_short_loop:
+	add	r0, sp, #0x10		@ input counter value
+	mov	r1, sp			@ output on the stack
+	mov	r2, r7			@ key
+
+	bl	AES_encrypt
+
+	vld1.8	{q0}, [r4]!	@ load input
+	vld1.8	{q1}, [sp,:64]	@ load encrypted counter
+	add	r8, r8, #1
+#ifdef __ARMEL__
+	rev	r0, r8
+	str	r0, [sp, #0x1c]		@ next counter value
+#else
+	str	r8, [sp, #0x1c]		@ next counter value
+#endif
+	veor	q0,q0,q1
+	vst1.8	{q0}, [r5]!	@ store output
+	subs	r6, r6, #1
+	bne	.Lctr_enc_short_loop
+
+	vmov.i32	q0, #0
+	vmov.i32	q1, #0
+	vstmia		sp!, {q0-q1}
+
+	ldmia	sp!, {r4-r8, pc}
+.size	bsaes_ctr32_encrypt_blocks,.-bsaes_ctr32_encrypt_blocks
+.globl	bsaes_xts_encrypt
+.type	bsaes_xts_encrypt,%function
+.align	4
+bsaes_xts_encrypt:
+	mov	ip, sp
+	stmdb	sp!, {r4-r10, lr}		@ 0x20
+	VFP_ABI_PUSH
+	mov	r6, sp				@ future r3
+
+	mov	r7, r0
+	mov	r8, r1
+	mov	r9, r2
+	mov	r10, r3
+
+	sub	r0, sp, #0x10			@ 0x10
+	bic	r0, #0xf			@ align at 16 bytes
+	mov	sp, r0
+
+#ifdef	XTS_CHAIN_TWEAK
+	ldr	r0, [ip]			@ pointer to input tweak
+#else
+	@ generate initial tweak
+	ldr	r0, [ip, #4]			@ iv[]
+	mov	r1, sp
+	ldr	r2, [ip, #0]			@ key2
+	bl	AES_encrypt
+	mov	r0,sp				@ pointer to initial tweak
+#endif
+
+	ldr	r1, [r10, #240]		@ get # of rounds
+	mov	r3, r6
+#ifndef	BSAES_ASM_EXTENDED_KEY
+	@ allocate the key schedule on the stack
+	sub	r12, sp, r1, lsl#7		@ 128 bytes per inner round key
+	@ add	r12, #96			@ size of bit-sliced key schedule
+	sub	r12, #48			@ place for tweak[9]
+
+	@ populate the key schedule
+	mov	r4, r10			@ pass key
+	mov	r5, r1			@ pass # of rounds
+	mov	sp, r12
+	add	r12, #0x90			@ pass key schedule
+	bl	_bsaes_key_convert
+	veor	q7, q7, q15	@ fix up last round key
+	vstmia	r12, {q7}			@ save last round key
+#else
+	ldr	r12, [r10, #244]
+	eors	r12, #1
+	beq	0f
+
+	str	r12, [r10, #244]
+	mov	r4, r10			@ pass key
+	mov	r5, r1			@ pass # of rounds
+	add	r12, r10, #248			@ pass key schedule
+	bl	_bsaes_key_convert
+	veor	q7, q7, q15	@ fix up last round key
+	vstmia	r12, {q7}
+
+.align	2
+0:	sub	sp, #0x90			@ place for tweak[9]
+#endif
+
+	vld1.8	{q8}, [r0]			@ initial tweak
+	adr	r2, .Lxts_magic
+
+	subs	r9, #0x80
+	blo	.Lxts_enc_short
+	b	.Lxts_enc_loop
+
+.align	4
+.Lxts_enc_loop:
+	vldmia		r2, {q5}	@ load XTS magic
+	vshr.s64	q6, q8, #63
+	mov		r0, sp
+	vand		q6, q6, q5
+	vadd.u64	q9, q8, q8
+	vst1.64		{q8}, [r0,:128]!
+	vswp		d13,d12
+	vshr.s64	q7, q9, #63
+	veor		q9, q9, q6
+	vand		q7, q7, q5
+	vadd.u64	q10, q9, q9
+	vst1.64		{q9}, [r0,:128]!
+	vswp		d15,d14
+	vshr.s64	q6, q10, #63
+	veor		q10, q10, q7
+	vand		q6, q6, q5
+	vld1.8		{q0}, [r7]!
+	vadd.u64	q11, q10, q10
+	vst1.64		{q10}, [r0,:128]!
+	vswp		d13,d12
+	vshr.s64	q7, q11, #63
+	veor		q11, q11, q6
+	vand		q7, q7, q5
+	vld1.8		{q1}, [r7]!
+	veor		q0, q0, q8
+	vadd.u64	q12, q11, q11
+	vst1.64		{q11}, [r0,:128]!
+	vswp		d15,d14
+	vshr.s64	q6, q12, #63
+	veor		q12, q12, q7
+	vand		q6, q6, q5
+	vld1.8		{q2}, [r7]!
+	veor		q1, q1, q9
+	vadd.u64	q13, q12, q12
+	vst1.64		{q12}, [r0,:128]!
+	vswp		d13,d12
+	vshr.s64	q7, q13, #63
+	veor		q13, q13, q6
+	vand		q7, q7, q5
+	vld1.8		{q3}, [r7]!
+	veor		q2, q2, q10
+	vadd.u64	q14, q13, q13
+	vst1.64		{q13}, [r0,:128]!
+	vswp		d15,d14
+	vshr.s64	q6, q14, #63
+	veor		q14, q14, q7
+	vand		q6, q6, q5
+	vld1.8		{q4}, [r7]!
+	veor		q3, q3, q11
+	vadd.u64	q15, q14, q14
+	vst1.64		{q14}, [r0,:128]!
+	vswp		d13,d12
+	vshr.s64	q7, q15, #63
+	veor		q15, q15, q6
+	vand		q7, q7, q5
+	vld1.8		{q5}, [r7]!
+	veor		q4, q4, q12
+	vadd.u64	q8, q15, q15
+	vst1.64		{q15}, [r0,:128]!
+	vswp		d15,d14
+	veor		q8, q8, q7
+	vst1.64		{q8}, [r0,:128]		@ next round tweak
+
+	vld1.8		{q6-q7}, [r7]!
+	veor		q5, q5, q13
+#ifndef	BSAES_ASM_EXTENDED_KEY
+	add		r4, sp, #0x90			@ pass key schedule
+#else
+	add		r4, r10, #248			@ pass key schedule
+#endif
+	veor		q6, q6, q14
+	mov		r5, r1			@ pass rounds
+	veor		q7, q7, q15
+	mov		r0, sp
+
+	bl		_bsaes_encrypt8
+
+	vld1.64		{q8-q9}, [r0,:128]!
+	vld1.64		{q10-q11}, [r0,:128]!
+	veor		q0, q0, q8
+	vld1.64		{q12-q13}, [r0,:128]!
+	veor		q1, q1, q9
+	veor		q8, q4, q10
+	vst1.8		{q0-q1}, [r8]!
+	veor		q9, q6, q11
+	vld1.64		{q14-q15}, [r0,:128]!
+	veor		q10, q3, q12
+	vst1.8		{q8-q9}, [r8]!
+	veor		q11, q7, q13
+	veor		q12, q2, q14
+	vst1.8		{q10-q11}, [r8]!
+	veor		q13, q5, q15
+	vst1.8		{q12-q13}, [r8]!
+
+	vld1.64		{q8}, [r0,:128]		@ next round tweak
+
+	subs		r9, #0x80
+	bpl		.Lxts_enc_loop
+
+.Lxts_enc_short:
+	adds		r9, #0x70
+	bmi		.Lxts_enc_done
+
+	vldmia		r2, {q5}	@ load XTS magic
+	vshr.s64	q7, q8, #63
+	mov		r0, sp
+	vand		q7, q7, q5
+	vadd.u64	q9, q8, q8
+	vst1.64		{q8}, [r0,:128]!
+	vswp		d15,d14
+	vshr.s64	q6, q9, #63
+	veor		q9, q9, q7
+	vand		q6, q6, q5
+	vadd.u64	q10, q9, q9
+	vst1.64		{q9}, [r0,:128]!
+	vswp		d13,d12
+	vshr.s64	q7, q10, #63
+	veor		q10, q10, q6
+	vand		q7, q7, q5
+	vld1.8		{q0}, [r7]!
+	subs		r9, #0x10
+	bmi		.Lxts_enc_1
+	vadd.u64	q11, q10, q10
+	vst1.64		{q10}, [r0,:128]!
+	vswp		d15,d14
+	vshr.s64	q6, q11, #63
+	veor		q11, q11, q7
+	vand		q6, q6, q5
+	vld1.8		{q1}, [r7]!
+	subs		r9, #0x10
+	bmi		.Lxts_enc_2
+	veor		q0, q0, q8
+	vadd.u64	q12, q11, q11
+	vst1.64		{q11}, [r0,:128]!
+	vswp		d13,d12
+	vshr.s64	q7, q12, #63
+	veor		q12, q12, q6
+	vand		q7, q7, q5
+	vld1.8		{q2}, [r7]!
+	subs		r9, #0x10
+	bmi		.Lxts_enc_3
+	veor		q1, q1, q9
+	vadd.u64	q13, q12, q12
+	vst1.64		{q12}, [r0,:128]!
+	vswp		d15,d14
+	vshr.s64	q6, q13, #63
+	veor		q13, q13, q7
+	vand		q6, q6, q5
+	vld1.8		{q3}, [r7]!
+	subs		r9, #0x10
+	bmi		.Lxts_enc_4
+	veor		q2, q2, q10
+	vadd.u64	q14, q13, q13
+	vst1.64		{q13}, [r0,:128]!
+	vswp		d13,d12
+	vshr.s64	q7, q14, #63
+	veor		q14, q14, q6
+	vand		q7, q7, q5
+	vld1.8		{q4}, [r7]!
+	subs		r9, #0x10
+	bmi		.Lxts_enc_5
+	veor		q3, q3, q11
+	vadd.u64	q15, q14, q14
+	vst1.64		{q14}, [r0,:128]!
+	vswp		d15,d14
+	vshr.s64	q6, q15, #63
+	veor		q15, q15, q7
+	vand		q6, q6, q5
+	vld1.8		{q5}, [r7]!
+	subs		r9, #0x10
+	bmi		.Lxts_enc_6
+	veor		q4, q4, q12
+	sub		r9, #0x10
+	vst1.64		{q15}, [r0,:128]		@ next round tweak
+
+	vld1.8		{q6}, [r7]!
+	veor		q5, q5, q13
+#ifndef	BSAES_ASM_EXTENDED_KEY
+	add		r4, sp, #0x90			@ pass key schedule
+#else
+	add		r4, r10, #248			@ pass key schedule
+#endif
+	veor		q6, q6, q14
+	mov		r5, r1			@ pass rounds
+	mov		r0, sp
+
+	bl		_bsaes_encrypt8
+
+	vld1.64		{q8-q9}, [r0,:128]!
+	vld1.64		{q10-q11}, [r0,:128]!
+	veor		q0, q0, q8
+	vld1.64		{q12-q13}, [r0,:128]!
+	veor		q1, q1, q9
+	veor		q8, q4, q10
+	vst1.8		{q0-q1}, [r8]!
+	veor		q9, q6, q11
+	vld1.64		{q14}, [r0,:128]!
+	veor		q10, q3, q12
+	vst1.8		{q8-q9}, [r8]!
+	veor		q11, q7, q13
+	veor		q12, q2, q14
+	vst1.8		{q10-q11}, [r8]!
+	vst1.8		{q12}, [r8]!
+
+	vld1.64		{q8}, [r0,:128]		@ next round tweak
+	b		.Lxts_enc_done
+.align	4
+.Lxts_enc_6:
+	vst1.64		{q14}, [r0,:128]		@ next round tweak
+
+	veor		q4, q4, q12
+#ifndef	BSAES_ASM_EXTENDED_KEY
+	add		r4, sp, #0x90			@ pass key schedule
+#else
+	add		r4, r10, #248			@ pass key schedule
+#endif
+	veor		q5, q5, q13
+	mov		r5, r1			@ pass rounds
+	mov		r0, sp
+
+	bl		_bsaes_encrypt8
+
+	vld1.64		{q8-q9}, [r0,:128]!
+	vld1.64		{q10-q11}, [r0,:128]!
+	veor		q0, q0, q8
+	vld1.64		{q12-q13}, [r0,:128]!
+	veor		q1, q1, q9
+	veor		q8, q4, q10
+	vst1.8		{q0-q1}, [r8]!
+	veor		q9, q6, q11
+	veor		q10, q3, q12
+	vst1.8		{q8-q9}, [r8]!
+	veor		q11, q7, q13
+	vst1.8		{q10-q11}, [r8]!
+
+	vld1.64		{q8}, [r0,:128]		@ next round tweak
+	b		.Lxts_enc_done
+
+@ put this in range for both ARM and Thumb mode adr instructions
+.align	5
+.Lxts_magic:
+	.quad	1, 0x87
+
+.align	5
+.Lxts_enc_5:
+	vst1.64		{q13}, [r0,:128]		@ next round tweak
+
+	veor		q3, q3, q11
+#ifndef	BSAES_ASM_EXTENDED_KEY
+	add		r4, sp, #0x90			@ pass key schedule
+#else
+	add		r4, r10, #248			@ pass key schedule
+#endif
+	veor		q4, q4, q12
+	mov		r5, r1			@ pass rounds
+	mov		r0, sp
+
+	bl		_bsaes_encrypt8
+
+	vld1.64		{q8-q9}, [r0,:128]!
+	vld1.64		{q10-q11}, [r0,:128]!
+	veor		q0, q0, q8
+	vld1.64		{q12}, [r0,:128]!
+	veor		q1, q1, q9
+	veor		q8, q4, q10
+	vst1.8		{q0-q1}, [r8]!
+	veor		q9, q6, q11
+	veor		q10, q3, q12
+	vst1.8		{q8-q9}, [r8]!
+	vst1.8		{q10}, [r8]!
+
+	vld1.64		{q8}, [r0,:128]		@ next round tweak
+	b		.Lxts_enc_done
+.align	4
+.Lxts_enc_4:
+	vst1.64		{q12}, [r0,:128]		@ next round tweak
+
+	veor		q2, q2, q10
+#ifndef	BSAES_ASM_EXTENDED_KEY
+	add		r4, sp, #0x90			@ pass key schedule
+#else
+	add		r4, r10, #248			@ pass key schedule
+#endif
+	veor		q3, q3, q11
+	mov		r5, r1			@ pass rounds
+	mov		r0, sp
+
+	bl		_bsaes_encrypt8
+
+	vld1.64		{q8-q9}, [r0,:128]!
+	vld1.64		{q10-q11}, [r0,:128]!
+	veor		q0, q0, q8
+	veor		q1, q1, q9
+	veor		q8, q4, q10
+	vst1.8		{q0-q1}, [r8]!
+	veor		q9, q6, q11
+	vst1.8		{q8-q9}, [r8]!
+
+	vld1.64		{q8}, [r0,:128]		@ next round tweak
+	b		.Lxts_enc_done
+.align	4
+.Lxts_enc_3:
+	vst1.64		{q11}, [r0,:128]		@ next round tweak
+
+	veor		q1, q1, q9
+#ifndef	BSAES_ASM_EXTENDED_KEY
+	add		r4, sp, #0x90			@ pass key schedule
+#else
+	add		r4, r10, #248			@ pass key schedule
+#endif
+	veor		q2, q2, q10
+	mov		r5, r1			@ pass rounds
+	mov		r0, sp
+
+	bl		_bsaes_encrypt8
+
+	vld1.64		{q8-q9}, [r0,:128]!
+	vld1.64		{q10}, [r0,:128]!
+	veor		q0, q0, q8
+	veor		q1, q1, q9
+	veor		q8, q4, q10
+	vst1.8		{q0-q1}, [r8]!
+	vst1.8		{q8}, [r8]!
+
+	vld1.64		{q8}, [r0,:128]		@ next round tweak
+	b		.Lxts_enc_done
+.align	4
+.Lxts_enc_2:
+	vst1.64		{q10}, [r0,:128]		@ next round tweak
+
+	veor		q0, q0, q8
+#ifndef	BSAES_ASM_EXTENDED_KEY
+	add		r4, sp, #0x90			@ pass key schedule
+#else
+	add		r4, r10, #248			@ pass key schedule
+#endif
+	veor		q1, q1, q9
+	mov		r5, r1			@ pass rounds
+	mov		r0, sp
+
+	bl		_bsaes_encrypt8
+
+	vld1.64		{q8-q9}, [r0,:128]!
+	veor		q0, q0, q8
+	veor		q1, q1, q9
+	vst1.8		{q0-q1}, [r8]!
+
+	vld1.64		{q8}, [r0,:128]		@ next round tweak
+	b		.Lxts_enc_done
+.align	4
+.Lxts_enc_1:
+	mov		r0, sp
+	veor		q0, q8
+	mov		r1, sp
+	vst1.8		{q0}, [sp,:128]
+	mov		r2, r10
+	mov		r4, r3				@ preserve fp
+
+	bl		AES_encrypt
+
+	vld1.8		{q0}, [sp,:128]
+	veor		q0, q0, q8
+	vst1.8		{q0}, [r8]!
+	mov		r3, r4
+
+	vmov		q8, q9		@ next round tweak
+
+.Lxts_enc_done:
+#ifndef	XTS_CHAIN_TWEAK
+	adds		r9, #0x10
+	beq		.Lxts_enc_ret
+	sub		r6, r8, #0x10
+
+.Lxts_enc_steal:
+	ldrb		r0, [r7], #1
+	ldrb		r1, [r8, #-0x10]
+	strb		r0, [r8, #-0x10]
+	strb		r1, [r8], #1
+
+	subs		r9, #1
+	bhi		.Lxts_enc_steal
+
+	vld1.8		{q0}, [r6]
+	mov		r0, sp
+	veor		q0, q0, q8
+	mov		r1, sp
+	vst1.8		{q0}, [sp,:128]
+	mov		r2, r10
+	mov		r4, r3			@ preserve fp
+
+	bl		AES_encrypt
+
+	vld1.8		{q0}, [sp,:128]
+	veor		q0, q0, q8
+	vst1.8		{q0}, [r6]
+	mov		r3, r4
+#endif
+
+.Lxts_enc_ret:
+	bic		r0, r3, #0xf
+	vmov.i32	q0, #0
+	vmov.i32	q1, #0
+#ifdef	XTS_CHAIN_TWEAK
+	ldr		r1, [r3, #0x20+VFP_ABI_FRAME]	@ chain tweak
+#endif
+.Lxts_enc_bzero:				@ wipe key schedule [if any]
+	vstmia		sp!, {q0-q1}
+	cmp		sp, r0
+	bne		.Lxts_enc_bzero
+
+	mov		sp, r3
+#ifdef	XTS_CHAIN_TWEAK
+	vst1.8		{q8}, [r1]
+#endif
+	VFP_ABI_POP
+	ldmia		sp!, {r4-r10, pc}	@ return
+
+.size	bsaes_xts_encrypt,.-bsaes_xts_encrypt
+
+.globl	bsaes_xts_decrypt
+.type	bsaes_xts_decrypt,%function
+.align	4
+bsaes_xts_decrypt:
+	mov	ip, sp
+	stmdb	sp!, {r4-r10, lr}		@ 0x20
+	VFP_ABI_PUSH
+	mov	r6, sp				@ future r3
+
+	mov	r7, r0
+	mov	r8, r1
+	mov	r9, r2
+	mov	r10, r3
+
+	sub	r0, sp, #0x10			@ 0x10
+	bic	r0, #0xf			@ align at 16 bytes
+	mov	sp, r0
+
+#ifdef	XTS_CHAIN_TWEAK
+	ldr	r0, [ip]			@ pointer to input tweak
+#else
+	@ generate initial tweak
+	ldr	r0, [ip, #4]			@ iv[]
+	mov	r1, sp
+	ldr	r2, [ip, #0]			@ key2
+	bl	AES_encrypt
+	mov	r0, sp				@ pointer to initial tweak
+#endif
+
+	ldr	r1, [r10, #240]		@ get # of rounds
+	mov	r3, r6
+#ifndef	BSAES_ASM_EXTENDED_KEY
+	@ allocate the key schedule on the stack
+	sub	r12, sp, r1, lsl#7		@ 128 bytes per inner round key
+	@ add	r12, #96			@ size of bit-sliced key schedule
+	sub	r12, #48			@ place for tweak[9]
+
+	@ populate the key schedule
+	mov	r4, r10			@ pass key
+	mov	r5, r1			@ pass # of rounds
+	mov	sp, r12
+	add	r12, #0x90			@ pass key schedule
+	bl	_bsaes_key_convert
+	add	r4, sp, #0x90
+	vldmia	r4, {q6}
+	vstmia	r12,  {q15}		@ save last round key
+	veor	q7, q7, q6	@ fix up round 0 key
+	vstmia	r4, {q7}
+#else
+	ldr	r12, [r10, #244]
+	eors	r12, #1
+	beq	0f
+
+	str	r12, [r10, #244]
+	mov	r4, r10			@ pass key
+	mov	r5, r1			@ pass # of rounds
+	add	r12, r10, #248			@ pass key schedule
+	bl	_bsaes_key_convert
+	add	r4, r10, #248
+	vldmia	r4, {q6}
+	vstmia	r12,  {q15}		@ save last round key
+	veor	q7, q7, q6	@ fix up round 0 key
+	vstmia	r4, {q7}
+
+.align	2
+0:	sub	sp, #0x90			@ place for tweak[9]
+#endif
+	vld1.8	{q8}, [r0]			@ initial tweak
+	adr	r2, .Lxts_magic
+
+	tst	r9, #0xf			@ if not multiple of 16
+	it	ne				@ Thumb2 thing, sanity check in ARM
+	subne	r9, #0x10			@ subtract another 16 bytes
+	subs	r9, #0x80
+
+	blo	.Lxts_dec_short
+	b	.Lxts_dec_loop
+
+.align	4
+.Lxts_dec_loop:
+	vldmia		r2, {q5}	@ load XTS magic
+	vshr.s64	q6, q8, #63
+	mov		r0, sp
+	vand		q6, q6, q5
+	vadd.u64	q9, q8, q8
+	vst1.64		{q8}, [r0,:128]!
+	vswp		d13,d12
+	vshr.s64	q7, q9, #63
+	veor		q9, q9, q6
+	vand		q7, q7, q5
+	vadd.u64	q10, q9, q9
+	vst1.64		{q9}, [r0,:128]!
+	vswp		d15,d14
+	vshr.s64	q6, q10, #63
+	veor		q10, q10, q7
+	vand		q6, q6, q5
+	vld1.8		{q0}, [r7]!
+	vadd.u64	q11, q10, q10
+	vst1.64		{q10}, [r0,:128]!
+	vswp		d13,d12
+	vshr.s64	q7, q11, #63
+	veor		q11, q11, q6
+	vand		q7, q7, q5
+	vld1.8		{q1}, [r7]!
+	veor		q0, q0, q8
+	vadd.u64	q12, q11, q11
+	vst1.64		{q11}, [r0,:128]!
+	vswp		d15,d14
+	vshr.s64	q6, q12, #63
+	veor		q12, q12, q7
+	vand		q6, q6, q5
+	vld1.8		{q2}, [r7]!
+	veor		q1, q1, q9
+	vadd.u64	q13, q12, q12
+	vst1.64		{q12}, [r0,:128]!
+	vswp		d13,d12
+	vshr.s64	q7, q13, #63
+	veor		q13, q13, q6
+	vand		q7, q7, q5
+	vld1.8		{q3}, [r7]!
+	veor		q2, q2, q10
+	vadd.u64	q14, q13, q13
+	vst1.64		{q13}, [r0,:128]!
+	vswp		d15,d14
+	vshr.s64	q6, q14, #63
+	veor		q14, q14, q7
+	vand		q6, q6, q5
+	vld1.8		{q4}, [r7]!
+	veor		q3, q3, q11
+	vadd.u64	q15, q14, q14
+	vst1.64		{q14}, [r0,:128]!
+	vswp		d13,d12
+	vshr.s64	q7, q15, #63
+	veor		q15, q15, q6
+	vand		q7, q7, q5
+	vld1.8		{q5}, [r7]!
+	veor		q4, q4, q12
+	vadd.u64	q8, q15, q15
+	vst1.64		{q15}, [r0,:128]!
+	vswp		d15,d14
+	veor		q8, q8, q7
+	vst1.64		{q8}, [r0,:128]		@ next round tweak
+
+	vld1.8		{q6-q7}, [r7]!
+	veor		q5, q5, q13
+#ifndef	BSAES_ASM_EXTENDED_KEY
+	add		r4, sp, #0x90			@ pass key schedule
+#else
+	add		r4, r10, #248			@ pass key schedule
+#endif
+	veor		q6, q6, q14
+	mov		r5, r1			@ pass rounds
+	veor		q7, q7, q15
+	mov		r0, sp
+
+	bl		_bsaes_decrypt8
+
+	vld1.64		{q8-q9}, [r0,:128]!
+	vld1.64		{q10-q11}, [r0,:128]!
+	veor		q0, q0, q8
+	vld1.64		{q12-q13}, [r0,:128]!
+	veor		q1, q1, q9
+	veor		q8, q6, q10
+	vst1.8		{q0-q1}, [r8]!
+	veor		q9, q4, q11
+	vld1.64		{q14-q15}, [r0,:128]!
+	veor		q10, q2, q12
+	vst1.8		{q8-q9}, [r8]!
+	veor		q11, q7, q13
+	veor		q12, q3, q14
+	vst1.8		{q10-q11}, [r8]!
+	veor		q13, q5, q15
+	vst1.8		{q12-q13}, [r8]!
+
+	vld1.64		{q8}, [r0,:128]		@ next round tweak
+
+	subs		r9, #0x80
+	bpl		.Lxts_dec_loop
+
+.Lxts_dec_short:
+	adds		r9, #0x70
+	bmi		.Lxts_dec_done
+
+	vldmia		r2, {q5}	@ load XTS magic
+	vshr.s64	q7, q8, #63
+	mov		r0, sp
+	vand		q7, q7, q5
+	vadd.u64	q9, q8, q8
+	vst1.64		{q8}, [r0,:128]!
+	vswp		d15,d14
+	vshr.s64	q6, q9, #63
+	veor		q9, q9, q7
+	vand		q6, q6, q5
+	vadd.u64	q10, q9, q9
+	vst1.64		{q9}, [r0,:128]!
+	vswp		d13,d12
+	vshr.s64	q7, q10, #63
+	veor		q10, q10, q6
+	vand		q7, q7, q5
+	vld1.8		{q0}, [r7]!
+	subs		r9, #0x10
+	bmi		.Lxts_dec_1
+	vadd.u64	q11, q10, q10
+	vst1.64		{q10}, [r0,:128]!
+	vswp		d15,d14
+	vshr.s64	q6, q11, #63
+	veor		q11, q11, q7
+	vand		q6, q6, q5
+	vld1.8		{q1}, [r7]!
+	subs		r9, #0x10
+	bmi		.Lxts_dec_2
+	veor		q0, q0, q8
+	vadd.u64	q12, q11, q11
+	vst1.64		{q11}, [r0,:128]!
+	vswp		d13,d12
+	vshr.s64	q7, q12, #63
+	veor		q12, q12, q6
+	vand		q7, q7, q5
+	vld1.8		{q2}, [r7]!
+	subs		r9, #0x10
+	bmi		.Lxts_dec_3
+	veor		q1, q1, q9
+	vadd.u64	q13, q12, q12
+	vst1.64		{q12}, [r0,:128]!
+	vswp		d15,d14
+	vshr.s64	q6, q13, #63
+	veor		q13, q13, q7
+	vand		q6, q6, q5
+	vld1.8		{q3}, [r7]!
+	subs		r9, #0x10
+	bmi		.Lxts_dec_4
+	veor		q2, q2, q10
+	vadd.u64	q14, q13, q13
+	vst1.64		{q13}, [r0,:128]!
+	vswp		d13,d12
+	vshr.s64	q7, q14, #63
+	veor		q14, q14, q6
+	vand		q7, q7, q5
+	vld1.8		{q4}, [r7]!
+	subs		r9, #0x10
+	bmi		.Lxts_dec_5
+	veor		q3, q3, q11
+	vadd.u64	q15, q14, q14
+	vst1.64		{q14}, [r0,:128]!
+	vswp		d15,d14
+	vshr.s64	q6, q15, #63
+	veor		q15, q15, q7
+	vand		q6, q6, q5
+	vld1.8		{q5}, [r7]!
+	subs		r9, #0x10
+	bmi		.Lxts_dec_6
+	veor		q4, q4, q12
+	sub		r9, #0x10
+	vst1.64		{q15}, [r0,:128]		@ next round tweak
+
+	vld1.8		{q6}, [r7]!
+	veor		q5, q5, q13
+#ifndef	BSAES_ASM_EXTENDED_KEY
+	add		r4, sp, #0x90			@ pass key schedule
+#else
+	add		r4, r10, #248			@ pass key schedule
+#endif
+	veor		q6, q6, q14
+	mov		r5, r1			@ pass rounds
+	mov		r0, sp
+
+	bl		_bsaes_decrypt8
+
+	vld1.64		{q8-q9}, [r0,:128]!
+	vld1.64		{q10-q11}, [r0,:128]!
+	veor		q0, q0, q8
+	vld1.64		{q12-q13}, [r0,:128]!
+	veor		q1, q1, q9
+	veor		q8, q6, q10
+	vst1.8		{q0-q1}, [r8]!
+	veor		q9, q4, q11
+	vld1.64		{q14}, [r0,:128]!
+	veor		q10, q2, q12
+	vst1.8		{q8-q9}, [r8]!
+	veor		q11, q7, q13
+	veor		q12, q3, q14
+	vst1.8		{q10-q11}, [r8]!
+	vst1.8		{q12}, [r8]!
+
+	vld1.64		{q8}, [r0,:128]		@ next round tweak
+	b		.Lxts_dec_done
+.align	4
+.Lxts_dec_6:
+	vst1.64		{q14}, [r0,:128]		@ next round tweak
+
+	veor		q4, q4, q12
+#ifndef	BSAES_ASM_EXTENDED_KEY
+	add		r4, sp, #0x90			@ pass key schedule
+#else
+	add		r4, r10, #248			@ pass key schedule
+#endif
+	veor		q5, q5, q13
+	mov		r5, r1			@ pass rounds
+	mov		r0, sp
+
+	bl		_bsaes_decrypt8
+
+	vld1.64		{q8-q9}, [r0,:128]!
+	vld1.64		{q10-q11}, [r0,:128]!
+	veor		q0, q0, q8
+	vld1.64		{q12-q13}, [r0,:128]!
+	veor		q1, q1, q9
+	veor		q8, q6, q10
+	vst1.8		{q0-q1}, [r8]!
+	veor		q9, q4, q11
+	veor		q10, q2, q12
+	vst1.8		{q8-q9}, [r8]!
+	veor		q11, q7, q13
+	vst1.8		{q10-q11}, [r8]!
+
+	vld1.64		{q8}, [r0,:128]		@ next round tweak
+	b		.Lxts_dec_done
+.align	4
+.Lxts_dec_5:
+	vst1.64		{q13}, [r0,:128]		@ next round tweak
+
+	veor		q3, q3, q11
+#ifndef	BSAES_ASM_EXTENDED_KEY
+	add		r4, sp, #0x90			@ pass key schedule
+#else
+	add		r4, r10, #248			@ pass key schedule
+#endif
+	veor		q4, q4, q12
+	mov		r5, r1			@ pass rounds
+	mov		r0, sp
+
+	bl		_bsaes_decrypt8
+
+	vld1.64		{q8-q9}, [r0,:128]!
+	vld1.64		{q10-q11}, [r0,:128]!
+	veor		q0, q0, q8
+	vld1.64		{q12}, [r0,:128]!
+	veor		q1, q1, q9
+	veor		q8, q6, q10
+	vst1.8		{q0-q1}, [r8]!
+	veor		q9, q4, q11
+	veor		q10, q2, q12
+	vst1.8		{q8-q9}, [r8]!
+	vst1.8		{q10}, [r8]!
+
+	vld1.64		{q8}, [r0,:128]		@ next round tweak
+	b		.Lxts_dec_done
+.align	4
+.Lxts_dec_4:
+	vst1.64		{q12}, [r0,:128]		@ next round tweak
+
+	veor		q2, q2, q10
+#ifndef	BSAES_ASM_EXTENDED_KEY
+	add		r4, sp, #0x90			@ pass key schedule
+#else
+	add		r4, r10, #248			@ pass key schedule
+#endif
+	veor		q3, q3, q11
+	mov		r5, r1			@ pass rounds
+	mov		r0, sp
+
+	bl		_bsaes_decrypt8
+
+	vld1.64		{q8-q9}, [r0,:128]!
+	vld1.64		{q10-q11}, [r0,:128]!
+	veor		q0, q0, q8
+	veor		q1, q1, q9
+	veor		q8, q6, q10
+	vst1.8		{q0-q1}, [r8]!
+	veor		q9, q4, q11
+	vst1.8		{q8-q9}, [r8]!
+
+	vld1.64		{q8}, [r0,:128]		@ next round tweak
+	b		.Lxts_dec_done
+.align	4
+.Lxts_dec_3:
+	vst1.64		{q11}, [r0,:128]		@ next round tweak
+
+	veor		q1, q1, q9
+#ifndef	BSAES_ASM_EXTENDED_KEY
+	add		r4, sp, #0x90			@ pass key schedule
+#else
+	add		r4, r10, #248			@ pass key schedule
+#endif
+	veor		q2, q2, q10
+	mov		r5, r1			@ pass rounds
+	mov		r0, sp
+
+	bl		_bsaes_decrypt8
+
+	vld1.64		{q8-q9}, [r0,:128]!
+	vld1.64		{q10}, [r0,:128]!
+	veor		q0, q0, q8
+	veor		q1, q1, q9
+	veor		q8, q6, q10
+	vst1.8		{q0-q1}, [r8]!
+	vst1.8		{q8}, [r8]!
+
+	vld1.64		{q8}, [r0,:128]		@ next round tweak
+	b		.Lxts_dec_done
+.align	4
+.Lxts_dec_2:
+	vst1.64		{q10}, [r0,:128]		@ next round tweak
+
+	veor		q0, q0, q8
+#ifndef	BSAES_ASM_EXTENDED_KEY
+	add		r4, sp, #0x90			@ pass key schedule
+#else
+	add		r4, r10, #248			@ pass key schedule
+#endif
+	veor		q1, q1, q9
+	mov		r5, r1			@ pass rounds
+	mov		r0, sp
+
+	bl		_bsaes_decrypt8
+
+	vld1.64		{q8-q9}, [r0,:128]!
+	veor		q0, q0, q8
+	veor		q1, q1, q9
+	vst1.8		{q0-q1}, [r8]!
+
+	vld1.64		{q8}, [r0,:128]		@ next round tweak
+	b		.Lxts_dec_done
+.align	4
+.Lxts_dec_1:
+	mov		r0, sp
+	veor		q0, q8
+	mov		r1, sp
+	vst1.8		{q0}, [sp,:128]
+	mov		r2, r10
+	mov		r4, r3				@ preserve fp
+	mov		r5, r2			@ preserve magic
+
+	bl		AES_decrypt
+
+	vld1.8		{q0}, [sp,:128]
+	veor		q0, q0, q8
+	vst1.8		{q0}, [r8]!
+	mov		r3, r4
+	mov		r2, r5
+
+	vmov		q8, q9		@ next round tweak
+
+.Lxts_dec_done:
+#ifndef	XTS_CHAIN_TWEAK
+	adds		r9, #0x10
+	beq		.Lxts_dec_ret
+
+	@ calculate one round of extra tweak for the stolen ciphertext
+	vldmia		r2, {q5}
+	vshr.s64	q6, q8, #63
+	vand		q6, q6, q5
+	vadd.u64	q9, q8, q8
+	vswp		d13,d12
+	veor		q9, q9, q6
+
+	@ perform the final decryption with the last tweak value
+	vld1.8		{q0}, [r7]!
+	mov		r0, sp
+	veor		q0, q0, q9
+	mov		r1, sp
+	vst1.8		{q0}, [sp,:128]
+	mov		r2, r10
+	mov		r4, r3			@ preserve fp
+
+	bl		AES_decrypt
+
+	vld1.8		{q0}, [sp,:128]
+	veor		q0, q0, q9
+	vst1.8		{q0}, [r8]
+
+	mov		r6, r8
+.Lxts_dec_steal:
+	ldrb		r1, [r8]
+	ldrb		r0, [r7], #1
+	strb		r1, [r8, #0x10]
+	strb		r0, [r8], #1
+
+	subs		r9, #1
+	bhi		.Lxts_dec_steal
+
+	vld1.8		{q0}, [r6]
+	mov		r0, sp
+	veor		q0, q8
+	mov		r1, sp
+	vst1.8		{q0}, [sp,:128]
+	mov		r2, r10
+
+	bl		AES_decrypt
+
+	vld1.8		{q0}, [sp,:128]
+	veor		q0, q0, q8
+	vst1.8		{q0}, [r6]
+	mov		r3, r4
+#endif
+
+.Lxts_dec_ret:
+	bic		r0, r3, #0xf
+	vmov.i32	q0, #0
+	vmov.i32	q1, #0
+#ifdef	XTS_CHAIN_TWEAK
+	ldr		r1, [r3, #0x20+VFP_ABI_FRAME]	@ chain tweak
+#endif
+.Lxts_dec_bzero:				@ wipe key schedule [if any]
+	vstmia		sp!, {q0-q1}
+	cmp		sp, r0
+	bne		.Lxts_dec_bzero
+
+	mov		sp, r3
+#ifdef	XTS_CHAIN_TWEAK
+	vst1.8		{q8}, [r1]
+#endif
+	VFP_ABI_POP
+	ldmia		sp!, {r4-r10, pc}	@ return
+
+.size	bsaes_xts_decrypt,.-bsaes_xts_decrypt
+#endif
diff --git a/arch/arm/crypto/aesbs-glue.c b/arch/arm/crypto/aesbs-glue.c
new file mode 100644
index 0000000..4522366
--- /dev/null
+++ b/arch/arm/crypto/aesbs-glue.c
@@ -0,0 +1,434 @@
+/*
+ * linux/arch/arm/crypto/aesbs-glue.c - glue code for NEON bit sliced AES
+ *
+ * Copyright (C) 2013 Linaro Ltd <ard.biesheuvel@linaro.org>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <asm/neon.h>
+#include <crypto/aes.h>
+#include <crypto/ablk_helper.h>
+#include <crypto/algapi.h>
+#include <linux/module.h>
+
+#include "aes_glue.h"
+
+#define BIT_SLICED_KEY_MAXSIZE	(128 * (AES_MAXNR - 1) + 2 * AES_BLOCK_SIZE)
+
+struct BS_KEY {
+	struct AES_KEY	rk;
+	int		converted;
+	u8 __aligned(8)	bs[BIT_SLICED_KEY_MAXSIZE];
+} __aligned(8);
+
+asmlinkage void bsaes_enc_key_convert(u8 out[], struct AES_KEY const *in);
+asmlinkage void bsaes_dec_key_convert(u8 out[], struct AES_KEY const *in);
+
+asmlinkage void bsaes_cbc_encrypt(u8 const in[], u8 out[], u32 bytes,
+				  struct BS_KEY *key, u8 iv[]);
+
+asmlinkage void bsaes_ctr32_encrypt_blocks(u8 const in[], u8 out[], u32 blocks,
+					   struct BS_KEY *key, u8 const iv[]);
+
+asmlinkage void bsaes_xts_encrypt(u8 const in[], u8 out[], u32 bytes,
+				  struct BS_KEY *key, u8 tweak[]);
+
+asmlinkage void bsaes_xts_decrypt(u8 const in[], u8 out[], u32 bytes,
+				  struct BS_KEY *key, u8 tweak[]);
+
+struct aesbs_cbc_ctx {
+	struct AES_KEY	enc;
+	struct BS_KEY	dec;
+};
+
+struct aesbs_ctr_ctx {
+	struct BS_KEY	enc;
+};
+
+struct aesbs_xts_ctx {
+	struct BS_KEY	enc;
+	struct BS_KEY	dec;
+	struct AES_KEY	twkey;
+};
+
+static int aesbs_cbc_set_key(struct crypto_tfm *tfm, const u8 *in_key,
+			     unsigned int key_len)
+{
+	struct aesbs_cbc_ctx *ctx = crypto_tfm_ctx(tfm);
+	int bits = key_len * 8;
+
+	if (private_AES_set_encrypt_key(in_key, bits, &ctx->enc)) {
+		tfm->crt_flags |= CRYPTO_TFM_RES_BAD_KEY_LEN;
+		return -EINVAL;
+	}
+	ctx->dec.rk = ctx->enc;
+	private_AES_set_decrypt_key(in_key, bits, &ctx->dec.rk);
+	ctx->dec.converted = 0;
+	return 0;
+}
+
+static int aesbs_ctr_set_key(struct crypto_tfm *tfm, const u8 *in_key,
+			     unsigned int key_len)
+{
+	struct aesbs_ctr_ctx *ctx = crypto_tfm_ctx(tfm);
+	int bits = key_len * 8;
+
+	if (private_AES_set_encrypt_key(in_key, bits, &ctx->enc.rk)) {
+		tfm->crt_flags |= CRYPTO_TFM_RES_BAD_KEY_LEN;
+		return -EINVAL;
+	}
+	ctx->enc.converted = 0;
+	return 0;
+}
+
+static int aesbs_xts_set_key(struct crypto_tfm *tfm, const u8 *in_key,
+			     unsigned int key_len)
+{
+	struct aesbs_xts_ctx *ctx = crypto_tfm_ctx(tfm);
+	int bits = key_len * 4;
+
+	if (private_AES_set_encrypt_key(in_key, bits, &ctx->enc.rk)) {
+		tfm->crt_flags |= CRYPTO_TFM_RES_BAD_KEY_LEN;
+		return -EINVAL;
+	}
+	ctx->dec.rk = ctx->enc.rk;
+	private_AES_set_decrypt_key(in_key, bits, &ctx->dec.rk);
+	private_AES_set_encrypt_key(in_key + key_len / 2, bits, &ctx->twkey);
+	ctx->enc.converted = ctx->dec.converted = 0;
+	return 0;
+}
+
+static int aesbs_cbc_encrypt(struct blkcipher_desc *desc,
+			     struct scatterlist *dst,
+			     struct scatterlist *src, unsigned int nbytes)
+{
+	struct aesbs_cbc_ctx *ctx = crypto_blkcipher_ctx(desc->tfm);
+	struct blkcipher_walk walk;
+	int err;
+
+	blkcipher_walk_init(&walk, dst, src, nbytes);
+	err = blkcipher_walk_virt(desc, &walk);
+
+	while (walk.nbytes) {
+		u32 blocks = walk.nbytes / AES_BLOCK_SIZE;
+		u8 *src = walk.src.virt.addr;
+
+		if (walk.dst.virt.addr == walk.src.virt.addr) {
+			u8 *iv = walk.iv;
+
+			do {
+				crypto_xor(src, iv, AES_BLOCK_SIZE);
+				AES_encrypt(src, src, &ctx->enc);
+				iv = src;
+				src += AES_BLOCK_SIZE;
+			} while (--blocks);
+			memcpy(walk.iv, iv, AES_BLOCK_SIZE);
+		} else {
+			u8 *dst = walk.dst.virt.addr;
+
+			do {
+				crypto_xor(walk.iv, src, AES_BLOCK_SIZE);
+				AES_encrypt(walk.iv, dst, &ctx->enc);
+				memcpy(walk.iv, dst, AES_BLOCK_SIZE);
+				src += AES_BLOCK_SIZE;
+				dst += AES_BLOCK_SIZE;
+			} while (--blocks);
+		}
+		err = blkcipher_walk_done(desc, &walk, 0);
+	}
+	return err;
+}
+
+static int aesbs_cbc_decrypt(struct blkcipher_desc *desc,
+			     struct scatterlist *dst,
+			     struct scatterlist *src, unsigned int nbytes)
+{
+	struct aesbs_cbc_ctx *ctx = crypto_blkcipher_ctx(desc->tfm);
+	struct blkcipher_walk walk;
+	int err;
+
+	blkcipher_walk_init(&walk, dst, src, nbytes);
+	err = blkcipher_walk_virt_block(desc, &walk, 8 * AES_BLOCK_SIZE);
+
+	while ((walk.nbytes / AES_BLOCK_SIZE) >= 8) {
+		kernel_neon_begin();
+		bsaes_cbc_encrypt(walk.src.virt.addr, walk.dst.virt.addr,
+				  walk.nbytes, &ctx->dec, walk.iv);
+		kernel_neon_end();
+		err = blkcipher_walk_done(desc, &walk, 0);
+	}
+	while (walk.nbytes) {
+		u32 blocks = walk.nbytes / AES_BLOCK_SIZE;
+		u8 *dst = walk.dst.virt.addr;
+		u8 *src = walk.src.virt.addr;
+		u8 bk[2][AES_BLOCK_SIZE];
+		u8 *iv = walk.iv;
+
+		do {
+			if (walk.dst.virt.addr == walk.src.virt.addr)
+				memcpy(bk[blocks & 1], src, AES_BLOCK_SIZE);
+
+			AES_decrypt(src, dst, &ctx->dec.rk);
+			crypto_xor(dst, iv, AES_BLOCK_SIZE);
+
+			if (walk.dst.virt.addr == walk.src.virt.addr)
+				iv = bk[blocks & 1];
+			else
+				iv = src;
+
+			dst += AES_BLOCK_SIZE;
+			src += AES_BLOCK_SIZE;
+		} while (--blocks);
+		err = blkcipher_walk_done(desc, &walk, 0);
+	}
+	return err;
+}
+
+static void inc_be128_ctr(__be32 ctr[], u32 addend)
+{
+	int i;
+
+	for (i = 3; i >= 0; i--, addend = 1) {
+		u32 n = be32_to_cpu(ctr[i]) + addend;
+
+		ctr[i] = cpu_to_be32(n);
+		if (n >= addend)
+			break;
+	}
+}
+
+static int aesbs_ctr_encrypt(struct blkcipher_desc *desc,
+			     struct scatterlist *dst, struct scatterlist *src,
+			     unsigned int nbytes)
+{
+	struct aesbs_ctr_ctx *ctx = crypto_blkcipher_ctx(desc->tfm);
+	struct blkcipher_walk walk;
+	u32 blocks;
+	int err;
+
+	blkcipher_walk_init(&walk, dst, src, nbytes);
+	err = blkcipher_walk_virt_block(desc, &walk, 8 * AES_BLOCK_SIZE);
+
+	while ((blocks = walk.nbytes / AES_BLOCK_SIZE)) {
+		u32 tail = walk.nbytes % AES_BLOCK_SIZE;
+		__be32 *ctr = (__be32 *)walk.iv;
+		u32 headroom = UINT_MAX - be32_to_cpu(ctr[3]);
+
+		/* avoid 32 bit counter overflow in the NEON code */
+		if (unlikely(headroom < blocks)) {
+			blocks = headroom + 1;
+			tail = walk.nbytes - blocks * AES_BLOCK_SIZE;
+		}
+		kernel_neon_begin();
+		bsaes_ctr32_encrypt_blocks(walk.src.virt.addr,
+					   walk.dst.virt.addr, blocks,
+					   &ctx->enc, walk.iv);
+		kernel_neon_end();
+		inc_be128_ctr(ctr, blocks);
+
+		nbytes -= blocks * AES_BLOCK_SIZE;
+		if (nbytes && nbytes == tail && nbytes <= AES_BLOCK_SIZE)
+			break;
+
+		err = blkcipher_walk_done(desc, &walk, tail);
+	}
+	if (walk.nbytes) {
+		u8 *tdst = walk.dst.virt.addr + blocks * AES_BLOCK_SIZE;
+		u8 *tsrc = walk.src.virt.addr + blocks * AES_BLOCK_SIZE;
+		u8 ks[AES_BLOCK_SIZE];
+
+		AES_encrypt(walk.iv, ks, &ctx->enc.rk);
+		if (tdst != tsrc)
+			memcpy(tdst, tsrc, nbytes);
+		crypto_xor(tdst, ks, nbytes);
+		err = blkcipher_walk_done(desc, &walk, 0);
+	}
+	return err;
+}
+
+static int aesbs_xts_encrypt(struct blkcipher_desc *desc,
+			     struct scatterlist *dst,
+			     struct scatterlist *src, unsigned int nbytes)
+{
+	struct aesbs_xts_ctx *ctx = crypto_blkcipher_ctx(desc->tfm);
+	struct blkcipher_walk walk;
+	int err;
+
+	blkcipher_walk_init(&walk, dst, src, nbytes);
+	err = blkcipher_walk_virt_block(desc, &walk, 8 * AES_BLOCK_SIZE);
+
+	/* generate the initial tweak */
+	AES_encrypt(walk.iv, walk.iv, &ctx->twkey);
+
+	while (walk.nbytes) {
+		kernel_neon_begin();
+		bsaes_xts_encrypt(walk.src.virt.addr, walk.dst.virt.addr,
+				  walk.nbytes, &ctx->enc, walk.iv);
+		kernel_neon_end();
+		err = blkcipher_walk_done(desc, &walk, 0);
+	}
+	return err;
+}
+
+static int aesbs_xts_decrypt(struct blkcipher_desc *desc,
+			     struct scatterlist *dst,
+			     struct scatterlist *src, unsigned int nbytes)
+{
+	struct aesbs_xts_ctx *ctx = crypto_blkcipher_ctx(desc->tfm);
+	struct blkcipher_walk walk;
+	int err;
+
+	blkcipher_walk_init(&walk, dst, src, nbytes);
+	err = blkcipher_walk_virt_block(desc, &walk, 8 * AES_BLOCK_SIZE);
+
+	/* generate the initial tweak */
+	AES_encrypt(walk.iv, walk.iv, &ctx->twkey);
+
+	while (walk.nbytes) {
+		kernel_neon_begin();
+		bsaes_xts_decrypt(walk.src.virt.addr, walk.dst.virt.addr,
+				  walk.nbytes, &ctx->dec, walk.iv);
+		kernel_neon_end();
+		err = blkcipher_walk_done(desc, &walk, 0);
+	}
+	return err;
+}
+
+static struct crypto_alg aesbs_algs[] = { {
+	.cra_name		= "__cbc-aes-neonbs",
+	.cra_driver_name	= "__driver-cbc-aes-neonbs",
+	.cra_priority		= 0,
+	.cra_flags		= CRYPTO_ALG_TYPE_BLKCIPHER,
+	.cra_blocksize		= AES_BLOCK_SIZE,
+	.cra_ctxsize		= sizeof(struct aesbs_cbc_ctx),
+	.cra_alignmask		= 7,
+	.cra_type		= &crypto_blkcipher_type,
+	.cra_module		= THIS_MODULE,
+	.cra_blkcipher = {
+		.min_keysize	= AES_MIN_KEY_SIZE,
+		.max_keysize	= AES_MAX_KEY_SIZE,
+		.ivsize		= AES_BLOCK_SIZE,
+		.setkey		= aesbs_cbc_set_key,
+		.encrypt	= aesbs_cbc_encrypt,
+		.decrypt	= aesbs_cbc_decrypt,
+	},
+}, {
+	.cra_name		= "__ctr-aes-neonbs",
+	.cra_driver_name	= "__driver-ctr-aes-neonbs",
+	.cra_priority		= 0,
+	.cra_flags		= CRYPTO_ALG_TYPE_BLKCIPHER,
+	.cra_blocksize		= 1,
+	.cra_ctxsize		= sizeof(struct aesbs_ctr_ctx),
+	.cra_alignmask		= 7,
+	.cra_type		= &crypto_blkcipher_type,
+	.cra_module		= THIS_MODULE,
+	.cra_blkcipher = {
+		.min_keysize	= AES_MIN_KEY_SIZE,
+		.max_keysize	= AES_MAX_KEY_SIZE,
+		.ivsize		= AES_BLOCK_SIZE,
+		.setkey		= aesbs_ctr_set_key,
+		.encrypt	= aesbs_ctr_encrypt,
+		.decrypt	= aesbs_ctr_encrypt,
+	},
+}, {
+	.cra_name		= "__xts-aes-neonbs",
+	.cra_driver_name	= "__driver-xts-aes-neonbs",
+	.cra_priority		= 0,
+	.cra_flags		= CRYPTO_ALG_TYPE_BLKCIPHER,
+	.cra_blocksize		= AES_BLOCK_SIZE,
+	.cra_ctxsize		= sizeof(struct aesbs_xts_ctx),
+	.cra_alignmask		= 7,
+	.cra_type		= &crypto_blkcipher_type,
+	.cra_module		= THIS_MODULE,
+	.cra_blkcipher = {
+		.min_keysize	= 2 * AES_MIN_KEY_SIZE,
+		.max_keysize	= 2 * AES_MAX_KEY_SIZE,
+		.ivsize		= AES_BLOCK_SIZE,
+		.setkey		= aesbs_xts_set_key,
+		.encrypt	= aesbs_xts_encrypt,
+		.decrypt	= aesbs_xts_decrypt,
+	},
+}, {
+	.cra_name		= "cbc(aes)",
+	.cra_driver_name	= "cbc-aes-neonbs",
+	.cra_priority		= 300,
+	.cra_flags		= CRYPTO_ALG_TYPE_ABLKCIPHER|CRYPTO_ALG_ASYNC,
+	.cra_blocksize		= AES_BLOCK_SIZE,
+	.cra_ctxsize		= sizeof(struct async_helper_ctx),
+	.cra_alignmask		= 7,
+	.cra_type		= &crypto_ablkcipher_type,
+	.cra_module		= THIS_MODULE,
+	.cra_init		= ablk_init,
+	.cra_exit		= ablk_exit,
+	.cra_ablkcipher = {
+		.min_keysize	= AES_MIN_KEY_SIZE,
+		.max_keysize	= AES_MAX_KEY_SIZE,
+		.ivsize		= AES_BLOCK_SIZE,
+		.setkey		= ablk_set_key,
+		.encrypt	= __ablk_encrypt,
+		.decrypt	= ablk_decrypt,
+	}
+}, {
+	.cra_name		= "ctr(aes)",
+	.cra_driver_name	= "ctr-aes-neonbs",
+	.cra_priority		= 300,
+	.cra_flags		= CRYPTO_ALG_TYPE_ABLKCIPHER|CRYPTO_ALG_ASYNC,
+	.cra_blocksize		= 1,
+	.cra_ctxsize		= sizeof(struct async_helper_ctx),
+	.cra_alignmask		= 7,
+	.cra_type		= &crypto_ablkcipher_type,
+	.cra_module		= THIS_MODULE,
+	.cra_init		= ablk_init,
+	.cra_exit		= ablk_exit,
+	.cra_ablkcipher = {
+		.min_keysize	= AES_MIN_KEY_SIZE,
+		.max_keysize	= AES_MAX_KEY_SIZE,
+		.ivsize		= AES_BLOCK_SIZE,
+		.setkey		= ablk_set_key,
+		.encrypt	= ablk_encrypt,
+		.decrypt	= ablk_decrypt,
+	}
+}, {
+	.cra_name		= "xts(aes)",
+	.cra_driver_name	= "xts-aes-neonbs",
+	.cra_priority		= 300,
+	.cra_flags		= CRYPTO_ALG_TYPE_ABLKCIPHER|CRYPTO_ALG_ASYNC,
+	.cra_blocksize		= AES_BLOCK_SIZE,
+	.cra_ctxsize		= sizeof(struct async_helper_ctx),
+	.cra_alignmask		= 7,
+	.cra_type		= &crypto_ablkcipher_type,
+	.cra_module		= THIS_MODULE,
+	.cra_init		= ablk_init,
+	.cra_exit		= ablk_exit,
+	.cra_ablkcipher = {
+		.min_keysize	= 2 * AES_MIN_KEY_SIZE,
+		.max_keysize	= 2 * AES_MAX_KEY_SIZE,
+		.ivsize		= AES_BLOCK_SIZE,
+		.setkey		= ablk_set_key,
+		.encrypt	= ablk_encrypt,
+		.decrypt	= ablk_decrypt,
+	}
+} };
+
+static int __init aesbs_mod_init(void)
+{
+	if (!cpu_has_neon())
+		return -ENODEV;
+
+	return crypto_register_algs(aesbs_algs, ARRAY_SIZE(aesbs_algs));
+}
+
+static void __exit aesbs_mod_exit(void)
+{
+	crypto_unregister_algs(aesbs_algs, ARRAY_SIZE(aesbs_algs));
+}
+
+module_init(aesbs_mod_init);
+module_exit(aesbs_mod_exit);
+
+MODULE_DESCRIPTION("Bit sliced AES in CBC/CTR/XTS modes using NEON");
+MODULE_AUTHOR("Ard Biesheuvel <ard.biesheuvel@linaro.org>");
+MODULE_LICENSE("GPL");
diff --git a/arch/arm/crypto/bsaes-armv7.pl b/arch/arm/crypto/bsaes-armv7.pl
new file mode 100644
index 0000000..f3d96d9
--- /dev/null
+++ b/arch/arm/crypto/bsaes-armv7.pl
@@ -0,0 +1,2467 @@
+#!/usr/bin/env perl
+
+# ====================================================================
+# Written by Andy Polyakov <appro@openssl.org> for the OpenSSL
+# project. The module is, however, dual licensed under OpenSSL and
+# CRYPTOGAMS licenses depending on where you obtain it. For further
+# details see http://www.openssl.org/~appro/cryptogams/.
+#
+# Specific modes and adaptation for Linux kernel by Ard Biesheuvel
+# <ard.biesheuvel@linaro.org>. Permission to use under GPL terms is
+# granted.
+# ====================================================================
+
+# Bit-sliced AES for ARM NEON
+#
+# February 2012.
+#
+# This implementation is direct adaptation of bsaes-x86_64 module for
+# ARM NEON. Except that this module is endian-neutral [in sense that
+# it can be compiled for either endianness] by courtesy of vld1.8's
+# neutrality. Initial version doesn't implement interface to OpenSSL,
+# only low-level primitives and unsupported entry points, just enough
+# to collect performance results, which for Cortex-A8 core are:
+#
+# encrypt	19.5 cycles per byte processed with 128-bit key
+# decrypt	22.1 cycles per byte processed with 128-bit key
+# key conv.	440  cycles per 128-bit key/0.18 of 8x block
+#
+# Snapdragon S4 encrypts byte in 17.6 cycles and decrypts in 19.7,
+# which is [much] worse than anticipated (for further details see
+# http://www.openssl.org/~appro/Snapdragon-S4.html).
+#
+# Cortex-A15 manages in 14.2/16.1 cycles [when integer-only code
+# manages in 20.0 cycles].
+#
+# When comparing to x86_64 results keep in mind that NEON unit is
+# [mostly] single-issue and thus can't [fully] benefit from
+# instruction-level parallelism. And when comparing to aes-armv4
+# results keep in mind key schedule conversion overhead (see
+# bsaes-x86_64.pl for further details)...
+#
+#						<appro@openssl.org>
+
+# April-August 2013
+#
+# Add CBC, CTR and XTS subroutines, adapt for kernel use.
+#
+#					<ard.biesheuvel@linaro.org>
+
+while (($output=shift) && ($output!~/^\w[\w\-]*\.\w+$/)) {}
+open STDOUT,">$output";
+
+my ($inp,$out,$len,$key)=("r0","r1","r2","r3");
+my @XMM=map("q$_",(0..15));
+
+{
+my ($key,$rounds,$const)=("r4","r5","r6");
+
+sub Dlo()   { shift=~m|q([1]?[0-9])|?"d".($1*2):"";     }
+sub Dhi()   { shift=~m|q([1]?[0-9])|?"d".($1*2+1):"";   }
+
+sub Sbox {
+# input in  lsb > [b0, b1, b2, b3, b4, b5, b6, b7] < msb
+# output in lsb > [b0, b1, b4, b6, b3, b7, b2, b5] < msb
+my @b=@_[0..7];
+my @t=@_[8..11];
+my @s=@_[12..15];
+	&InBasisChange	(@b);
+	&Inv_GF256	(@b[6,5,0,3,7,1,4,2],@t,@s);
+	&OutBasisChange	(@b[7,1,4,2,6,5,0,3]);
+}
+
+sub InBasisChange {
+# input in  lsb > [b0, b1, b2, b3, b4, b5, b6, b7] < msb
+# output in lsb > [b6, b5, b0, b3, b7, b1, b4, b2] < msb 
+my @b=@_[0..7];
+$code.=<<___;
+	veor	@b[2], @b[2], @b[1]
+	veor	@b[5], @b[5], @b[6]
+	veor	@b[3], @b[3], @b[0]
+	veor	@b[6], @b[6], @b[2]
+	veor	@b[5], @b[5], @b[0]
+
+	veor	@b[6], @b[6], @b[3]
+	veor	@b[3], @b[3], @b[7]
+	veor	@b[7], @b[7], @b[5]
+	veor	@b[3], @b[3], @b[4]
+	veor	@b[4], @b[4], @b[5]
+
+	veor	@b[2], @b[2], @b[7]
+	veor	@b[3], @b[3], @b[1]
+	veor	@b[1], @b[1], @b[5]
+___
+}
+
+sub OutBasisChange {
+# input in  lsb > [b0, b1, b2, b3, b4, b5, b6, b7] < msb
+# output in lsb > [b6, b1, b2, b4, b7, b0, b3, b5] < msb
+my @b=@_[0..7];
+$code.=<<___;
+	veor	@b[0], @b[0], @b[6]
+	veor	@b[1], @b[1], @b[4]
+	veor	@b[4], @b[4], @b[6]
+	veor	@b[2], @b[2], @b[0]
+	veor	@b[6], @b[6], @b[1]
+
+	veor	@b[1], @b[1], @b[5]
+	veor	@b[5], @b[5], @b[3]
+	veor	@b[3], @b[3], @b[7]
+	veor	@b[7], @b[7], @b[5]
+	veor	@b[2], @b[2], @b[5]
+
+	veor	@b[4], @b[4], @b[7]
+___
+}
+
+sub InvSbox {
+# input in lsb 	> [b0, b1, b2, b3, b4, b5, b6, b7] < msb
+# output in lsb	> [b0, b1, b6, b4, b2, b7, b3, b5] < msb
+my @b=@_[0..7];
+my @t=@_[8..11];
+my @s=@_[12..15];
+	&InvInBasisChange	(@b);
+	&Inv_GF256		(@b[5,1,2,6,3,7,0,4],@t,@s);
+	&InvOutBasisChange	(@b[3,7,0,4,5,1,2,6]);
+}
+
+sub InvInBasisChange {		# OutBasisChange in reverse (with twist)
+my @b=@_[5,1,2,6,3,7,0,4];
+$code.=<<___
+	 veor	@b[1], @b[1], @b[7]
+	veor	@b[4], @b[4], @b[7]
+
+	veor	@b[7], @b[7], @b[5]
+	 veor	@b[1], @b[1], @b[3]
+	veor	@b[2], @b[2], @b[5]
+	veor	@b[3], @b[3], @b[7]
+
+	veor	@b[6], @b[6], @b[1]
+	veor	@b[2], @b[2], @b[0]
+	 veor	@b[5], @b[5], @b[3]
+	veor	@b[4], @b[4], @b[6]
+	veor	@b[0], @b[0], @b[6]
+	veor	@b[1], @b[1], @b[4]
+___
+}
+
+sub InvOutBasisChange {		# InBasisChange in reverse
+my @b=@_[2,5,7,3,6,1,0,4];
+$code.=<<___;
+	veor	@b[1], @b[1], @b[5]
+	veor	@b[2], @b[2], @b[7]
+
+	veor	@b[3], @b[3], @b[1]
+	veor	@b[4], @b[4], @b[5]
+	veor	@b[7], @b[7], @b[5]
+	veor	@b[3], @b[3], @b[4]
+	 veor 	@b[5], @b[5], @b[0]
+	veor	@b[3], @b[3], @b[7]
+	 veor	@b[6], @b[6], @b[2]
+	 veor	@b[2], @b[2], @b[1]
+	veor	@b[6], @b[6], @b[3]
+
+	veor	@b[3], @b[3], @b[0]
+	veor	@b[5], @b[5], @b[6]
+___
+}
+
+sub Mul_GF4 {
+#;*************************************************************
+#;* Mul_GF4: Input x0-x1,y0-y1 Output x0-x1 Temp t0 (8) *
+#;*************************************************************
+my ($x0,$x1,$y0,$y1,$t0,$t1)=@_;
+$code.=<<___;
+	veor 	$t0, $y0, $y1
+	vand	$t0, $t0, $x0
+	veor	$x0, $x0, $x1
+	vand	$t1, $x1, $y0
+	vand	$x0, $x0, $y1
+	veor	$x1, $t1, $t0
+	veor	$x0, $x0, $t1
+___
+}
+
+sub Mul_GF4_N {				# not used, see next subroutine
+# multiply and scale by N
+my ($x0,$x1,$y0,$y1,$t0)=@_;
+$code.=<<___;
+	veor	$t0, $y0, $y1
+	vand	$t0, $t0, $x0
+	veor	$x0, $x0, $x1
+	vand	$x1, $x1, $y0
+	vand	$x0, $x0, $y1
+	veor	$x1, $x1, $x0
+	veor	$x0, $x0, $t0
+___
+}
+
+sub Mul_GF4_N_GF4 {
+# interleaved Mul_GF4_N and Mul_GF4
+my ($x0,$x1,$y0,$y1,$t0,
+    $x2,$x3,$y2,$y3,$t1)=@_;
+$code.=<<___;
+	veor	$t0, $y0, $y1
+	 veor 	$t1, $y2, $y3
+	vand	$t0, $t0, $x0
+	 vand	$t1, $t1, $x2
+	veor	$x0, $x0, $x1
+	 veor	$x2, $x2, $x3
+	vand	$x1, $x1, $y0
+	 vand	$x3, $x3, $y2
+	vand	$x0, $x0, $y1
+	 vand	$x2, $x2, $y3
+	veor	$x1, $x1, $x0
+	 veor	$x2, $x2, $x3
+	veor	$x0, $x0, $t0
+	 veor	$x3, $x3, $t1
+___
+}
+sub Mul_GF16_2 {
+my @x=@_[0..7];
+my @y=@_[8..11];
+my @t=@_[12..15];
+$code.=<<___;
+	veor	@t[0], @x[0], @x[2]
+	veor	@t[1], @x[1], @x[3]
+___
+	&Mul_GF4  	(@x[0], @x[1], @y[0], @y[1], @t[2..3]);
+$code.=<<___;
+	veor	@y[0], @y[0], @y[2]
+	veor	@y[1], @y[1], @y[3]
+___
+	Mul_GF4_N_GF4	(@t[0], @t[1], @y[0], @y[1], @t[3],
+			 @x[2], @x[3], @y[2], @y[3], @t[2]);
+$code.=<<___;
+	veor	@x[0], @x[0], @t[0]
+	veor	@x[2], @x[2], @t[0]
+	veor	@x[1], @x[1], @t[1]
+	veor	@x[3], @x[3], @t[1]
+
+	veor	@t[0], @x[4], @x[6]
+	veor	@t[1], @x[5], @x[7]
+___
+	&Mul_GF4_N_GF4	(@t[0], @t[1], @y[0], @y[1], @t[3],
+			 @x[6], @x[7], @y[2], @y[3], @t[2]);
+$code.=<<___;
+	veor	@y[0], @y[0], @y[2]
+	veor	@y[1], @y[1], @y[3]
+___
+	&Mul_GF4  	(@x[4], @x[5], @y[0], @y[1], @t[2..3]);
+$code.=<<___;
+	veor	@x[4], @x[4], @t[0]
+	veor	@x[6], @x[6], @t[0]
+	veor	@x[5], @x[5], @t[1]
+	veor	@x[7], @x[7], @t[1]
+___
+}
+sub Inv_GF256 {
+#;********************************************************************
+#;* Inv_GF256: Input x0-x7 Output x0-x7 Temp t0-t3,s0-s3 (144)       *
+#;********************************************************************
+my @x=@_[0..7];
+my @t=@_[8..11];
+my @s=@_[12..15];
+# direct optimizations from hardware
+$code.=<<___;
+	veor	@t[3], @x[4], @x[6]
+	veor	@t[2], @x[5], @x[7]
+	veor	@t[1], @x[1], @x[3]
+	veor	@s[1], @x[7], @x[6]
+	 vmov	@t[0], @t[2]
+	veor	@s[0], @x[0], @x[2]
+
+	vorr	@t[2], @t[2], @t[1]
+	veor	@s[3], @t[3], @t[0]
+	vand	@s[2], @t[3], @s[0]
+	vorr	@t[3], @t[3], @s[0]
+	veor	@s[0], @s[0], @t[1]
+	vand	@t[0], @t[0], @t[1]
+	veor	@t[1], @x[3], @x[2]
+	vand	@s[3], @s[3], @s[0]
+	vand	@s[1], @s[1], @t[1]
+	veor	@t[1], @x[4], @x[5]
+	veor	@s[0], @x[1], @x[0]
+	veor	@t[3], @t[3], @s[1]
+	veor	@t[2], @t[2], @s[1]
+	vand	@s[1], @t[1], @s[0]
+	vorr	@t[1], @t[1], @s[0]
+	veor	@t[3], @t[3], @s[3]
+	veor	@t[0], @t[0], @s[1]
+	veor	@t[2], @t[2], @s[2]
+	veor	@t[1], @t[1], @s[3]
+	veor	@t[0], @t[0], @s[2]
+	vand	@s[0], @x[7], @x[3]
+	veor	@t[1], @t[1], @s[2]
+	vand	@s[1], @x[6], @x[2]
+	vand	@s[2], @x[5], @x[1]
+	vorr	@s[3], @x[4], @x[0]
+	veor	@t[3], @t[3], @s[0]
+	veor	@t[1], @t[1], @s[2]
+	veor	@t[0], @t[0], @s[3]
+	veor	@t[2], @t[2], @s[1]
+
+	@ Inv_GF16 \t0, \t1, \t2, \t3, \s0, \s1, \s2, \s3
+
+	@ new smaller inversion
+
+	vand	@s[2], @t[3], @t[1]
+	vmov	@s[0], @t[0]
+
+	veor	@s[1], @t[2], @s[2]
+	veor	@s[3], @t[0], @s[2]
+	veor	@s[2], @t[0], @s[2]	@ @s[2]=@s[3]
+
+	vbsl	@s[1], @t[1], @t[0]
+	vbsl	@s[3], @t[3], @t[2]
+	veor	@t[3], @t[3], @t[2]
+
+	vbsl	@s[0], @s[1], @s[2]
+	vbsl	@t[0], @s[2], @s[1]
+
+	vand	@s[2], @s[0], @s[3]
+	veor	@t[1], @t[1], @t[0]
+
+	veor	@s[2], @s[2], @t[3]
+___
+# output in s3, s2, s1, t1
+
+# Mul_GF16_2 \x0, \x1, \x2, \x3, \x4, \x5, \x6, \x7, \t2, \t3, \t0, \t1, \s0, \s1, \s2, \s3
+
+# Mul_GF16_2 \x0, \x1, \x2, \x3, \x4, \x5, \x6, \x7, \s3, \s2, \s1, \t1, \s0, \t0, \t2, \t3
+	&Mul_GF16_2(@x,@s[3,2,1],@t[1],@s[0],@t[0,2,3]);
+
+### output msb > [x3,x2,x1,x0,x7,x6,x5,x4] < lsb
+}
+
+# AES linear components
+
+sub ShiftRows {
+my @x=@_[0..7];
+my @t=@_[8..11];
+my $mask=pop;
+$code.=<<___;
+	vldmia	$key!, {@t[0]-@t[3]}
+	veor	@t[0], @t[0], @x[0]
+	veor	@t[1], @t[1], @x[1]
+	vtbl.8	`&Dlo(@x[0])`, {@t[0]}, `&Dlo($mask)`
+	vtbl.8	`&Dhi(@x[0])`, {@t[0]}, `&Dhi($mask)`
+	vldmia	$key!, {@t[0]}
+	veor	@t[2], @t[2], @x[2]
+	vtbl.8	`&Dlo(@x[1])`, {@t[1]}, `&Dlo($mask)`
+	vtbl.8	`&Dhi(@x[1])`, {@t[1]}, `&Dhi($mask)`
+	vldmia	$key!, {@t[1]}
+	veor	@t[3], @t[3], @x[3]
+	vtbl.8	`&Dlo(@x[2])`, {@t[2]}, `&Dlo($mask)`
+	vtbl.8	`&Dhi(@x[2])`, {@t[2]}, `&Dhi($mask)`
+	vldmia	$key!, {@t[2]}
+	vtbl.8	`&Dlo(@x[3])`, {@t[3]}, `&Dlo($mask)`
+	vtbl.8	`&Dhi(@x[3])`, {@t[3]}, `&Dhi($mask)`
+	vldmia	$key!, {@t[3]}
+	veor	@t[0], @t[0], @x[4]
+	veor	@t[1], @t[1], @x[5]
+	vtbl.8	`&Dlo(@x[4])`, {@t[0]}, `&Dlo($mask)`
+	vtbl.8	`&Dhi(@x[4])`, {@t[0]}, `&Dhi($mask)`
+	veor	@t[2], @t[2], @x[6]
+	vtbl.8	`&Dlo(@x[5])`, {@t[1]}, `&Dlo($mask)`
+	vtbl.8	`&Dhi(@x[5])`, {@t[1]}, `&Dhi($mask)`
+	veor	@t[3], @t[3], @x[7]
+	vtbl.8	`&Dlo(@x[6])`, {@t[2]}, `&Dlo($mask)`
+	vtbl.8	`&Dhi(@x[6])`, {@t[2]}, `&Dhi($mask)`
+	vtbl.8	`&Dlo(@x[7])`, {@t[3]}, `&Dlo($mask)`
+	vtbl.8	`&Dhi(@x[7])`, {@t[3]}, `&Dhi($mask)`
+___
+}
+
+sub MixColumns {
+# modified to emit output in order suitable for feeding back to aesenc[last]
+my @x=@_[0..7];
+my @t=@_[8..15];
+my $inv=@_[16];	# optional
+$code.=<<___;
+	vext.8	@t[0], @x[0], @x[0], #12	@ x0 <<< 32
+	vext.8	@t[1], @x[1], @x[1], #12
+	 veor	@x[0], @x[0], @t[0]		@ x0 ^ (x0 <<< 32)
+	vext.8	@t[2], @x[2], @x[2], #12
+	 veor	@x[1], @x[1], @t[1]
+	vext.8	@t[3], @x[3], @x[3], #12
+	 veor	@x[2], @x[2], @t[2]
+	vext.8	@t[4], @x[4], @x[4], #12
+	 veor	@x[3], @x[3], @t[3]
+	vext.8	@t[5], @x[5], @x[5], #12
+	 veor	@x[4], @x[4], @t[4]
+	vext.8	@t[6], @x[6], @x[6], #12
+	 veor	@x[5], @x[5], @t[5]
+	vext.8	@t[7], @x[7], @x[7], #12
+	 veor	@x[6], @x[6], @t[6]
+
+	veor	@t[1], @t[1], @x[0]
+	 veor	@x[7], @x[7], @t[7]
+	 vext.8	@x[0], @x[0], @x[0], #8		@ (x0 ^ (x0 <<< 32)) <<< 64)
+	veor	@t[2], @t[2], @x[1]
+	veor	@t[0], @t[0], @x[7]
+	veor	@t[1], @t[1], @x[7]
+	 vext.8	@x[1], @x[1], @x[1], #8
+	veor	@t[5], @t[5], @x[4]
+	 veor	@x[0], @x[0], @t[0]
+	veor	@t[6], @t[6], @x[5]
+	 veor	@x[1], @x[1], @t[1]
+	 vext.8	@t[0], @x[4], @x[4], #8
+	veor	@t[4], @t[4], @x[3]
+	 vext.8	@t[1], @x[5], @x[5], #8
+	veor	@t[7], @t[7], @x[6]
+	 vext.8	@x[4], @x[3], @x[3], #8
+	veor	@t[3], @t[3], @x[2]
+	 vext.8	@x[5], @x[7], @x[7], #8
+	veor	@t[4], @t[4], @x[7]
+	 vext.8	@x[3], @x[6], @x[6], #8
+	veor	@t[3], @t[3], @x[7]
+	 vext.8	@x[6], @x[2], @x[2], #8
+	veor	@x[7], @t[1], @t[5]
+___
+$code.=<<___ if (!$inv);
+	veor	@x[2], @t[0], @t[4]
+	veor	@x[4], @x[4], @t[3]
+	veor	@x[5], @x[5], @t[7]
+	veor	@x[3], @x[3], @t[6]
+	 @ vmov	@x[2], @t[0]
+	veor	@x[6], @x[6], @t[2]
+	 @ vmov	@x[7], @t[1]
+___
+$code.=<<___ if ($inv);
+	veor	@t[3], @t[3], @x[4]
+	veor	@x[5], @x[5], @t[7]
+	veor	@x[2], @x[3], @t[6]
+	veor	@x[3], @t[0], @t[4]
+	veor	@x[4], @x[6], @t[2]
+	vmov	@x[6], @t[3]
+	 @ vmov	@x[7], @t[1]
+___
+}
+
+sub InvMixColumns_orig {
+my @x=@_[0..7];
+my @t=@_[8..15];
+
+$code.=<<___;
+	@ multiplication by 0x0e
+	vext.8	@t[7], @x[7], @x[7], #12
+	vmov	@t[2], @x[2]
+	veor	@x[2], @x[2], @x[5]		@ 2 5
+	veor	@x[7], @x[7], @x[5]		@ 7 5
+	vext.8	@t[0], @x[0], @x[0], #12
+	vmov	@t[5], @x[5]
+	veor	@x[5], @x[5], @x[0]		@ 5 0		[1]
+	veor	@x[0], @x[0], @x[1]		@ 0 1
+	vext.8	@t[1], @x[1], @x[1], #12
+	veor	@x[1], @x[1], @x[2]		@ 1 25
+	veor	@x[0], @x[0], @x[6]		@ 01 6		[2]
+	vext.8	@t[3], @x[3], @x[3], #12
+	veor	@x[1], @x[1], @x[3]		@ 125 3		[4]
+	veor	@x[2], @x[2], @x[0]		@ 25 016	[3]
+	veor	@x[3], @x[3], @x[7]		@ 3 75
+	veor	@x[7], @x[7], @x[6]		@ 75 6		[0]
+	vext.8	@t[6], @x[6], @x[6], #12
+	vmov	@t[4], @x[4]
+	veor	@x[6], @x[6], @x[4]		@ 6 4
+	veor	@x[4], @x[4], @x[3]		@ 4 375		[6]
+	veor	@x[3], @x[3], @x[7]		@ 375 756=36
+	veor	@x[6], @x[6], @t[5]		@ 64 5		[7]
+	veor	@x[3], @x[3], @t[2]		@ 36 2
+	vext.8	@t[5], @t[5], @t[5], #12
+	veor	@x[3], @x[3], @t[4]		@ 362 4		[5]
+___
+					my @y = @x[7,5,0,2,1,3,4,6];
+$code.=<<___;
+	@ multiplication by 0x0b
+	veor	@y[1], @y[1], @y[0]
+	veor	@y[0], @y[0], @t[0]
+	vext.8	@t[2], @t[2], @t[2], #12
+	veor	@y[1], @y[1], @t[1]
+	veor	@y[0], @y[0], @t[5]
+	vext.8	@t[4], @t[4], @t[4], #12
+	veor	@y[1], @y[1], @t[6]
+	veor	@y[0], @y[0], @t[7]
+	veor	@t[7], @t[7], @t[6]		@ clobber t[7]
+
+	veor	@y[3], @y[3], @t[0]
+	 veor	@y[1], @y[1], @y[0]
+	vext.8	@t[0], @t[0], @t[0], #12
+	veor	@y[2], @y[2], @t[1]
+	veor	@y[4], @y[4], @t[1]
+	vext.8	@t[1], @t[1], @t[1], #12
+	veor	@y[2], @y[2], @t[2]
+	veor	@y[3], @y[3], @t[2]
+	veor	@y[5], @y[5], @t[2]
+	veor	@y[2], @y[2], @t[7]
+	vext.8	@t[2], @t[2], @t[2], #12
+	veor	@y[3], @y[3], @t[3]
+	veor	@y[6], @y[6], @t[3]
+	veor	@y[4], @y[4], @t[3]
+	veor	@y[7], @y[7], @t[4]
+	vext.8	@t[3], @t[3], @t[3], #12
+	veor	@y[5], @y[5], @t[4]
+	veor	@y[7], @y[7], @t[7]
+	veor	@t[7], @t[7], @t[5]		@ clobber t[7] even more
+	veor	@y[3], @y[3], @t[5]
+	veor	@y[4], @y[4], @t[4]
+
+	veor	@y[5], @y[5], @t[7]
+	vext.8	@t[4], @t[4], @t[4], #12
+	veor	@y[6], @y[6], @t[7]
+	veor	@y[4], @y[4], @t[7]
+
+	veor	@t[7], @t[7], @t[5]
+	vext.8	@t[5], @t[5], @t[5], #12
+
+	@ multiplication by 0x0d
+	veor	@y[4], @y[4], @y[7]
+	 veor	@t[7], @t[7], @t[6]		@ restore t[7]
+	veor	@y[7], @y[7], @t[4]
+	vext.8	@t[6], @t[6], @t[6], #12
+	veor	@y[2], @y[2], @t[0]
+	veor	@y[7], @y[7], @t[5]
+	vext.8	@t[7], @t[7], @t[7], #12
+	veor	@y[2], @y[2], @t[2]
+
+	veor	@y[3], @y[3], @y[1]
+	veor	@y[1], @y[1], @t[1]
+	veor	@y[0], @y[0], @t[0]
+	veor	@y[3], @y[3], @t[0]
+	veor	@y[1], @y[1], @t[5]
+	veor	@y[0], @y[0], @t[5]
+	vext.8	@t[0], @t[0], @t[0], #12
+	veor	@y[1], @y[1], @t[7]
+	veor	@y[0], @y[0], @t[6]
+	veor	@y[3], @y[3], @y[1]
+	veor	@y[4], @y[4], @t[1]
+	vext.8	@t[1], @t[1], @t[1], #12
+
+	veor	@y[7], @y[7], @t[7]
+	veor	@y[4], @y[4], @t[2]
+	veor	@y[5], @y[5], @t[2]
+	veor	@y[2], @y[2], @t[6]
+	veor	@t[6], @t[6], @t[3]		@ clobber t[6]
+	vext.8	@t[2], @t[2], @t[2], #12
+	veor	@y[4], @y[4], @y[7]
+	veor	@y[3], @y[3], @t[6]
+
+	veor	@y[6], @y[6], @t[6]
+	veor	@y[5], @y[5], @t[5]
+	vext.8	@t[5], @t[5], @t[5], #12
+	veor	@y[6], @y[6], @t[4]
+	vext.8	@t[4], @t[4], @t[4], #12
+	veor	@y[5], @y[5], @t[6]
+	veor	@y[6], @y[6], @t[7]
+	vext.8	@t[7], @t[7], @t[7], #12
+	veor	@t[6], @t[6], @t[3]		@ restore t[6]
+	vext.8	@t[3], @t[3], @t[3], #12
+
+	@ multiplication by 0x09
+	veor	@y[4], @y[4], @y[1]
+	veor	@t[1], @t[1], @y[1]		@ t[1]=y[1]
+	veor	@t[0], @t[0], @t[5]		@ clobber t[0]
+	vext.8	@t[6], @t[6], @t[6], #12
+	veor	@t[1], @t[1], @t[5]
+	veor	@y[3], @y[3], @t[0]
+	veor	@t[0], @t[0], @y[0]		@ t[0]=y[0]
+	veor	@t[1], @t[1], @t[6]
+	veor	@t[6], @t[6], @t[7]		@ clobber t[6]
+	veor	@y[4], @y[4], @t[1]
+	veor	@y[7], @y[7], @t[4]
+	veor	@y[6], @y[6], @t[3]
+	veor	@y[5], @y[5], @t[2]
+	veor	@t[4], @t[4], @y[4]		@ t[4]=y[4]
+	veor	@t[3], @t[3], @y[3]		@ t[3]=y[3]
+	veor	@t[5], @t[5], @y[5]		@ t[5]=y[5]
+	veor	@t[2], @t[2], @y[2]		@ t[2]=y[2]
+	veor	@t[3], @t[3], @t[7]
+	veor	@XMM[5], @t[5], @t[6]
+	veor	@XMM[6], @t[6], @y[6]		@ t[6]=y[6]
+	veor	@XMM[2], @t[2], @t[6]
+	veor	@XMM[7], @t[7], @y[7]		@ t[7]=y[7]
+
+	vmov	@XMM[0], @t[0]
+	vmov	@XMM[1], @t[1]
+	@ vmov	@XMM[2], @t[2]
+	vmov	@XMM[3], @t[3]
+	vmov	@XMM[4], @t[4]
+	@ vmov	@XMM[5], @t[5]
+	@ vmov	@XMM[6], @t[6]
+	@ vmov	@XMM[7], @t[7]
+___
+}
+
+sub InvMixColumns {
+my @x=@_[0..7];
+my @t=@_[8..15];
+
+# Thanks to Jussi Kivilinna for providing pointer to
+#
+# | 0e 0b 0d 09 |   | 02 03 01 01 |   | 05 00 04 00 |
+# | 09 0e 0b 0d | = | 01 02 03 01 | x | 00 05 00 04 |
+# | 0d 09 0e 0b |   | 01 01 02 03 |   | 04 00 05 00 |
+# | 0b 0d 09 0e |   | 03 01 01 02 |   | 00 04 00 05 |
+
+$code.=<<___;
+	@ multiplication by 0x05-0x00-0x04-0x00
+	vext.8	@t[0], @x[0], @x[0], #8
+	vext.8	@t[6], @x[6], @x[6], #8
+	vext.8	@t[7], @x[7], @x[7], #8
+	veor	@t[0], @t[0], @x[0]
+	vext.8	@t[1], @x[1], @x[1], #8
+	veor	@t[6], @t[6], @x[6]
+	vext.8	@t[2], @x[2], @x[2], #8
+	veor	@t[7], @t[7], @x[7]
+	vext.8	@t[3], @x[3], @x[3], #8
+	veor	@t[1], @t[1], @x[1]
+	vext.8	@t[4], @x[4], @x[4], #8
+	veor	@t[2], @t[2], @x[2]
+	vext.8	@t[5], @x[5], @x[5], #8
+	veor	@t[3], @t[3], @x[3]
+	veor	@t[4], @t[4], @x[4]
+	veor	@t[5], @t[5], @x[5]
+
+	 veor	@x[0], @x[0], @t[6]
+	 veor	@x[1], @x[1], @t[6]
+	 veor	@x[2], @x[2], @t[0]
+	 veor	@x[4], @x[4], @t[2]
+	 veor	@x[3], @x[3], @t[1]
+	 veor	@x[1], @x[1], @t[7]
+	 veor	@x[2], @x[2], @t[7]
+	 veor	@x[4], @x[4], @t[6]
+	 veor	@x[5], @x[5], @t[3]
+	 veor	@x[3], @x[3], @t[6]
+	 veor	@x[6], @x[6], @t[4]
+	 veor	@x[4], @x[4], @t[7]
+	 veor	@x[5], @x[5], @t[7]
+	 veor	@x[7], @x[7], @t[5]
+___
+	&MixColumns	(@x,@t,1);	# flipped 2<->3 and 4<->6
+}
+
+sub swapmove {
+my ($a,$b,$n,$mask,$t)=@_;
+$code.=<<___;
+	vshr.u64	$t, $b, #$n
+	veor		$t, $t, $a
+	vand		$t, $t, $mask
+	veor		$a, $a, $t
+	vshl.u64	$t, $t, #$n
+	veor		$b, $b, $t
+___
+}
+sub swapmove2x {
+my ($a0,$b0,$a1,$b1,$n,$mask,$t0,$t1)=@_;
+$code.=<<___;
+	vshr.u64	$t0, $b0, #$n
+	 vshr.u64	$t1, $b1, #$n
+	veor		$t0, $t0, $a0
+	 veor		$t1, $t1, $a1
+	vand		$t0, $t0, $mask
+	 vand		$t1, $t1, $mask
+	veor		$a0, $a0, $t0
+	vshl.u64	$t0, $t0, #$n
+	 veor		$a1, $a1, $t1
+	 vshl.u64	$t1, $t1, #$n
+	veor		$b0, $b0, $t0
+	 veor		$b1, $b1, $t1
+___
+}
+
+sub bitslice {
+my @x=reverse(@_[0..7]);
+my ($t0,$t1,$t2,$t3)=@_[8..11];
+$code.=<<___;
+	vmov.i8	$t0,#0x55			@ compose .LBS0
+	vmov.i8	$t1,#0x33			@ compose .LBS1
+___
+	&swapmove2x(@x[0,1,2,3],1,$t0,$t2,$t3);
+	&swapmove2x(@x[4,5,6,7],1,$t0,$t2,$t3);
+$code.=<<___;
+	vmov.i8	$t0,#0x0f			@ compose .LBS2
+___
+	&swapmove2x(@x[0,2,1,3],2,$t1,$t2,$t3);
+	&swapmove2x(@x[4,6,5,7],2,$t1,$t2,$t3);
+
+	&swapmove2x(@x[0,4,1,5],4,$t0,$t2,$t3);
+	&swapmove2x(@x[2,6,3,7],4,$t0,$t2,$t3);
+}
+
+$code.=<<___;
+#ifndef __KERNEL__
+# include "arm_arch.h"
+
+# define VFP_ABI_PUSH	vstmdb	sp!,{d8-d15}
+# define VFP_ABI_POP	vldmia	sp!,{d8-d15}
+# define VFP_ABI_FRAME	0x40
+#else
+# define VFP_ABI_PUSH
+# define VFP_ABI_POP
+# define VFP_ABI_FRAME	0
+# define BSAES_ASM_EXTENDED_KEY
+# define XTS_CHAIN_TWEAK
+# define __ARM_ARCH__ __LINUX_ARM_ARCH__
+#endif
+
+#ifdef __thumb__
+# define adrl adr
+#endif
+
+#if __ARM_ARCH__>=7
+.text
+.syntax	unified 	@ ARMv7-capable assembler is expected to handle this
+#ifdef __thumb2__
+.thumb
+#else
+.code   32
+#endif
+
+.fpu	neon
+
+.type	_bsaes_decrypt8,%function
+.align	4
+_bsaes_decrypt8:
+	adr	$const,_bsaes_decrypt8
+	vldmia	$key!, {@XMM[9]}		@ round 0 key
+	add	$const,$const,#.LM0ISR-_bsaes_decrypt8
+
+	vldmia	$const!, {@XMM[8]}		@ .LM0ISR
+	veor	@XMM[10], @XMM[0], @XMM[9]	@ xor with round0 key
+	veor	@XMM[11], @XMM[1], @XMM[9]
+	 vtbl.8	`&Dlo(@XMM[0])`, {@XMM[10]}, `&Dlo(@XMM[8])`
+	 vtbl.8	`&Dhi(@XMM[0])`, {@XMM[10]}, `&Dhi(@XMM[8])`
+	veor	@XMM[12], @XMM[2], @XMM[9]
+	 vtbl.8	`&Dlo(@XMM[1])`, {@XMM[11]}, `&Dlo(@XMM[8])`
+	 vtbl.8	`&Dhi(@XMM[1])`, {@XMM[11]}, `&Dhi(@XMM[8])`
+	veor	@XMM[13], @XMM[3], @XMM[9]
+	 vtbl.8	`&Dlo(@XMM[2])`, {@XMM[12]}, `&Dlo(@XMM[8])`
+	 vtbl.8	`&Dhi(@XMM[2])`, {@XMM[12]}, `&Dhi(@XMM[8])`
+	veor	@XMM[14], @XMM[4], @XMM[9]
+	 vtbl.8	`&Dlo(@XMM[3])`, {@XMM[13]}, `&Dlo(@XMM[8])`
+	 vtbl.8	`&Dhi(@XMM[3])`, {@XMM[13]}, `&Dhi(@XMM[8])`
+	veor	@XMM[15], @XMM[5], @XMM[9]
+	 vtbl.8	`&Dlo(@XMM[4])`, {@XMM[14]}, `&Dlo(@XMM[8])`
+	 vtbl.8	`&Dhi(@XMM[4])`, {@XMM[14]}, `&Dhi(@XMM[8])`
+	veor	@XMM[10], @XMM[6], @XMM[9]
+	 vtbl.8	`&Dlo(@XMM[5])`, {@XMM[15]}, `&Dlo(@XMM[8])`
+	 vtbl.8	`&Dhi(@XMM[5])`, {@XMM[15]}, `&Dhi(@XMM[8])`
+	veor	@XMM[11], @XMM[7], @XMM[9]
+	 vtbl.8	`&Dlo(@XMM[6])`, {@XMM[10]}, `&Dlo(@XMM[8])`
+	 vtbl.8	`&Dhi(@XMM[6])`, {@XMM[10]}, `&Dhi(@XMM[8])`
+	 vtbl.8	`&Dlo(@XMM[7])`, {@XMM[11]}, `&Dlo(@XMM[8])`
+	 vtbl.8	`&Dhi(@XMM[7])`, {@XMM[11]}, `&Dhi(@XMM[8])`
+___
+	&bitslice	(@XMM[0..7, 8..11]);
+$code.=<<___;
+	sub	$rounds,$rounds,#1
+	b	.Ldec_sbox
+.align	4
+.Ldec_loop:
+___
+	&ShiftRows	(@XMM[0..7, 8..12]);
+$code.=".Ldec_sbox:\n";
+	&InvSbox	(@XMM[0..7, 8..15]);
+$code.=<<___;
+	subs	$rounds,$rounds,#1
+	bcc	.Ldec_done
+___
+	&InvMixColumns	(@XMM[0,1,6,4,2,7,3,5, 8..15]);
+$code.=<<___;
+	vldmia	$const, {@XMM[12]}		@ .LISR
+	ite	eq				@ Thumb2 thing, sanity check in ARM
+	addeq	$const,$const,#0x10
+	bne	.Ldec_loop
+	vldmia	$const, {@XMM[12]}		@ .LISRM0
+	b	.Ldec_loop
+.align	4
+.Ldec_done:
+___
+	&bitslice	(@XMM[0,1,6,4,2,7,3,5, 8..11]);
+$code.=<<___;
+	vldmia	$key, {@XMM[8]}			@ last round key
+	veor	@XMM[6], @XMM[6], @XMM[8]
+	veor	@XMM[4], @XMM[4], @XMM[8]
+	veor	@XMM[2], @XMM[2], @XMM[8]
+	veor	@XMM[7], @XMM[7], @XMM[8]
+	veor	@XMM[3], @XMM[3], @XMM[8]
+	veor	@XMM[5], @XMM[5], @XMM[8]
+	veor	@XMM[0], @XMM[0], @XMM[8]
+	veor	@XMM[1], @XMM[1], @XMM[8]
+	bx	lr
+.size	_bsaes_decrypt8,.-_bsaes_decrypt8
+
+.type	_bsaes_const,%object
+.align	6
+_bsaes_const:
+.LM0ISR:	@ InvShiftRows constants
+	.quad	0x0a0e0206070b0f03, 0x0004080c0d010509
+.LISR:
+	.quad	0x0504070602010003, 0x0f0e0d0c080b0a09
+.LISRM0:
+	.quad	0x01040b0e0205080f, 0x0306090c00070a0d
+.LM0SR:		@ ShiftRows constants
+	.quad	0x0a0e02060f03070b, 0x0004080c05090d01
+.LSR:
+	.quad	0x0504070600030201, 0x0f0e0d0c0a09080b
+.LSRM0:
+	.quad	0x0304090e00050a0f, 0x01060b0c0207080d
+.LM0:
+	.quad	0x02060a0e03070b0f, 0x0004080c0105090d
+.LREVM0SR:
+	.quad	0x090d01050c000408, 0x03070b0f060a0e02
+.asciz	"Bit-sliced AES for NEON, CRYPTOGAMS by <appro\@openssl.org>"
+.align	6
+.size	_bsaes_const,.-_bsaes_const
+
+.type	_bsaes_encrypt8,%function
+.align	4
+_bsaes_encrypt8:
+	adr	$const,_bsaes_encrypt8
+	vldmia	$key!, {@XMM[9]}		@ round 0 key
+	sub	$const,$const,#_bsaes_encrypt8-.LM0SR
+
+	vldmia	$const!, {@XMM[8]}		@ .LM0SR
+_bsaes_encrypt8_alt:
+	veor	@XMM[10], @XMM[0], @XMM[9]	@ xor with round0 key
+	veor	@XMM[11], @XMM[1], @XMM[9]
+	 vtbl.8	`&Dlo(@XMM[0])`, {@XMM[10]}, `&Dlo(@XMM[8])`
+	 vtbl.8	`&Dhi(@XMM[0])`, {@XMM[10]}, `&Dhi(@XMM[8])`
+	veor	@XMM[12], @XMM[2], @XMM[9]
+	 vtbl.8	`&Dlo(@XMM[1])`, {@XMM[11]}, `&Dlo(@XMM[8])`
+	 vtbl.8	`&Dhi(@XMM[1])`, {@XMM[11]}, `&Dhi(@XMM[8])`
+	veor	@XMM[13], @XMM[3], @XMM[9]
+	 vtbl.8	`&Dlo(@XMM[2])`, {@XMM[12]}, `&Dlo(@XMM[8])`
+	 vtbl.8	`&Dhi(@XMM[2])`, {@XMM[12]}, `&Dhi(@XMM[8])`
+	veor	@XMM[14], @XMM[4], @XMM[9]
+	 vtbl.8	`&Dlo(@XMM[3])`, {@XMM[13]}, `&Dlo(@XMM[8])`
+	 vtbl.8	`&Dhi(@XMM[3])`, {@XMM[13]}, `&Dhi(@XMM[8])`
+	veor	@XMM[15], @XMM[5], @XMM[9]
+	 vtbl.8	`&Dlo(@XMM[4])`, {@XMM[14]}, `&Dlo(@XMM[8])`
+	 vtbl.8	`&Dhi(@XMM[4])`, {@XMM[14]}, `&Dhi(@XMM[8])`
+	veor	@XMM[10], @XMM[6], @XMM[9]
+	 vtbl.8	`&Dlo(@XMM[5])`, {@XMM[15]}, `&Dlo(@XMM[8])`
+	 vtbl.8	`&Dhi(@XMM[5])`, {@XMM[15]}, `&Dhi(@XMM[8])`
+	veor	@XMM[11], @XMM[7], @XMM[9]
+	 vtbl.8	`&Dlo(@XMM[6])`, {@XMM[10]}, `&Dlo(@XMM[8])`
+	 vtbl.8	`&Dhi(@XMM[6])`, {@XMM[10]}, `&Dhi(@XMM[8])`
+	 vtbl.8	`&Dlo(@XMM[7])`, {@XMM[11]}, `&Dlo(@XMM[8])`
+	 vtbl.8	`&Dhi(@XMM[7])`, {@XMM[11]}, `&Dhi(@XMM[8])`
+_bsaes_encrypt8_bitslice:
+___
+	&bitslice	(@XMM[0..7, 8..11]);
+$code.=<<___;
+	sub	$rounds,$rounds,#1
+	b	.Lenc_sbox
+.align	4
+.Lenc_loop:
+___
+	&ShiftRows	(@XMM[0..7, 8..12]);
+$code.=".Lenc_sbox:\n";
+	&Sbox		(@XMM[0..7, 8..15]);
+$code.=<<___;
+	subs	$rounds,$rounds,#1
+	bcc	.Lenc_done
+___
+	&MixColumns	(@XMM[0,1,4,6,3,7,2,5, 8..15]);
+$code.=<<___;
+	vldmia	$const, {@XMM[12]}		@ .LSR
+	ite	eq				@ Thumb2 thing, samity check in ARM
+	addeq	$const,$const,#0x10
+	bne	.Lenc_loop
+	vldmia	$const, {@XMM[12]}		@ .LSRM0
+	b	.Lenc_loop
+.align	4
+.Lenc_done:
+___
+	# output in lsb > [t0, t1, t4, t6, t3, t7, t2, t5] < msb
+	&bitslice	(@XMM[0,1,4,6,3,7,2,5, 8..11]);
+$code.=<<___;
+	vldmia	$key, {@XMM[8]}			@ last round key
+	veor	@XMM[4], @XMM[4], @XMM[8]
+	veor	@XMM[6], @XMM[6], @XMM[8]
+	veor	@XMM[3], @XMM[3], @XMM[8]
+	veor	@XMM[7], @XMM[7], @XMM[8]
+	veor	@XMM[2], @XMM[2], @XMM[8]
+	veor	@XMM[5], @XMM[5], @XMM[8]
+	veor	@XMM[0], @XMM[0], @XMM[8]
+	veor	@XMM[1], @XMM[1], @XMM[8]
+	bx	lr
+.size	_bsaes_encrypt8,.-_bsaes_encrypt8
+___
+}
+{
+my ($out,$inp,$rounds,$const)=("r12","r4","r5","r6");
+
+sub bitslice_key {
+my @x=reverse(@_[0..7]);
+my ($bs0,$bs1,$bs2,$t2,$t3)=@_[8..12];
+
+	&swapmove	(@x[0,1],1,$bs0,$t2,$t3);
+$code.=<<___;
+	@ &swapmove(@x[2,3],1,$t0,$t2,$t3);
+	vmov	@x[2], @x[0]
+	vmov	@x[3], @x[1]
+___
+	#&swapmove2x(@x[4,5,6,7],1,$t0,$t2,$t3);
+
+	&swapmove2x	(@x[0,2,1,3],2,$bs1,$t2,$t3);
+$code.=<<___;
+	@ &swapmove2x(@x[4,6,5,7],2,$t1,$t2,$t3);
+	vmov	@x[4], @x[0]
+	vmov	@x[6], @x[2]
+	vmov	@x[5], @x[1]
+	vmov	@x[7], @x[3]
+___
+	&swapmove2x	(@x[0,4,1,5],4,$bs2,$t2,$t3);
+	&swapmove2x	(@x[2,6,3,7],4,$bs2,$t2,$t3);
+}
+
+$code.=<<___;
+.type	_bsaes_key_convert,%function
+.align	4
+_bsaes_key_convert:
+	adr	$const,_bsaes_key_convert
+	vld1.8	{@XMM[7]},  [$inp]!		@ load round 0 key
+	sub	$const,$const,#_bsaes_key_convert-.LM0
+	vld1.8	{@XMM[15]}, [$inp]!		@ load round 1 key
+
+	vmov.i8	@XMM[8],  #0x01			@ bit masks
+	vmov.i8	@XMM[9],  #0x02
+	vmov.i8	@XMM[10], #0x04
+	vmov.i8	@XMM[11], #0x08
+	vmov.i8	@XMM[12], #0x10
+	vmov.i8	@XMM[13], #0x20
+	vldmia	$const, {@XMM[14]}		@ .LM0
+
+#ifdef __ARMEL__
+	vrev32.8	@XMM[7],  @XMM[7]
+	vrev32.8	@XMM[15], @XMM[15]
+#endif
+	sub	$rounds,$rounds,#1
+	vstmia	$out!, {@XMM[7]}		@ save round 0 key
+	b	.Lkey_loop
+
+.align	4
+.Lkey_loop:
+	vtbl.8	`&Dlo(@XMM[7])`,{@XMM[15]},`&Dlo(@XMM[14])`
+	vtbl.8	`&Dhi(@XMM[7])`,{@XMM[15]},`&Dhi(@XMM[14])`
+	vmov.i8	@XMM[6],  #0x40
+	vmov.i8	@XMM[15], #0x80
+
+	vtst.8	@XMM[0], @XMM[7], @XMM[8]
+	vtst.8	@XMM[1], @XMM[7], @XMM[9]
+	vtst.8	@XMM[2], @XMM[7], @XMM[10]
+	vtst.8	@XMM[3], @XMM[7], @XMM[11]
+	vtst.8	@XMM[4], @XMM[7], @XMM[12]
+	vtst.8	@XMM[5], @XMM[7], @XMM[13]
+	vtst.8	@XMM[6], @XMM[7], @XMM[6]
+	vtst.8	@XMM[7], @XMM[7], @XMM[15]
+	vld1.8	{@XMM[15]}, [$inp]!		@ load next round key
+	vmvn	@XMM[0], @XMM[0]		@ "pnot"
+	vmvn	@XMM[1], @XMM[1]
+	vmvn	@XMM[5], @XMM[5]
+	vmvn	@XMM[6], @XMM[6]
+#ifdef __ARMEL__
+	vrev32.8	@XMM[15], @XMM[15]
+#endif
+	subs	$rounds,$rounds,#1
+	vstmia	$out!,{@XMM[0]-@XMM[7]}		@ write bit-sliced round key
+	bne	.Lkey_loop
+
+	vmov.i8	@XMM[7],#0x63			@ compose .L63
+	@ don't save last round key
+	bx	lr
+.size	_bsaes_key_convert,.-_bsaes_key_convert
+___
+}
+
+if (0) {		# following four functions are unsupported interface
+			# used for benchmarking...
+$code.=<<___;
+.globl	bsaes_enc_key_convert
+.type	bsaes_enc_key_convert,%function
+.align	4
+bsaes_enc_key_convert:
+	stmdb	sp!,{r4-r6,lr}
+	vstmdb	sp!,{d8-d15}		@ ABI specification says so
+
+	ldr	r5,[$inp,#240]			@ pass rounds
+	mov	r4,$inp				@ pass key
+	mov	r12,$out			@ pass key schedule
+	bl	_bsaes_key_convert
+	veor	@XMM[7],@XMM[7],@XMM[15]	@ fix up last round key
+	vstmia	r12, {@XMM[7]}			@ save last round key
+
+	vldmia	sp!,{d8-d15}
+	ldmia	sp!,{r4-r6,pc}
+.size	bsaes_enc_key_convert,.-bsaes_enc_key_convert
+
+.globl	bsaes_encrypt_128
+.type	bsaes_encrypt_128,%function
+.align	4
+bsaes_encrypt_128:
+	stmdb	sp!,{r4-r6,lr}
+	vstmdb	sp!,{d8-d15}		@ ABI specification says so
+.Lenc128_loop:
+	vld1.8	{@XMM[0]-@XMM[1]}, [$inp]!	@ load input
+	vld1.8	{@XMM[2]-@XMM[3]}, [$inp]!
+	mov	r4,$key				@ pass the key
+	vld1.8	{@XMM[4]-@XMM[5]}, [$inp]!
+	mov	r5,#10				@ pass rounds
+	vld1.8	{@XMM[6]-@XMM[7]}, [$inp]!
+
+	bl	_bsaes_encrypt8
+
+	vst1.8	{@XMM[0]-@XMM[1]}, [$out]!	@ write output
+	vst1.8	{@XMM[4]}, [$out]!
+	vst1.8	{@XMM[6]}, [$out]!
+	vst1.8	{@XMM[3]}, [$out]!
+	vst1.8	{@XMM[7]}, [$out]!
+	vst1.8	{@XMM[2]}, [$out]!
+	subs	$len,$len,#0x80
+	vst1.8	{@XMM[5]}, [$out]!
+	bhi	.Lenc128_loop
+
+	vldmia	sp!,{d8-d15}
+	ldmia	sp!,{r4-r6,pc}
+.size	bsaes_encrypt_128,.-bsaes_encrypt_128
+
+.globl	bsaes_dec_key_convert
+.type	bsaes_dec_key_convert,%function
+.align	4
+bsaes_dec_key_convert:
+	stmdb	sp!,{r4-r6,lr}
+	vstmdb	sp!,{d8-d15}		@ ABI specification says so
+
+	ldr	r5,[$inp,#240]			@ pass rounds
+	mov	r4,$inp				@ pass key
+	mov	r12,$out			@ pass key schedule
+	bl	_bsaes_key_convert
+	vldmia	$out, {@XMM[6]}
+	vstmia	r12,  {@XMM[15]}		@ save last round key
+	veor	@XMM[7], @XMM[7], @XMM[6]	@ fix up round 0 key
+	vstmia	$out, {@XMM[7]}
+
+	vldmia	sp!,{d8-d15}
+	ldmia	sp!,{r4-r6,pc}
+.size	bsaes_dec_key_convert,.-bsaes_dec_key_convert
+
+.globl	bsaes_decrypt_128
+.type	bsaes_decrypt_128,%function
+.align	4
+bsaes_decrypt_128:
+	stmdb	sp!,{r4-r6,lr}
+	vstmdb	sp!,{d8-d15}		@ ABI specification says so
+.Ldec128_loop:
+	vld1.8	{@XMM[0]-@XMM[1]}, [$inp]!	@ load input
+	vld1.8	{@XMM[2]-@XMM[3]}, [$inp]!
+	mov	r4,$key				@ pass the key
+	vld1.8	{@XMM[4]-@XMM[5]}, [$inp]!
+	mov	r5,#10				@ pass rounds
+	vld1.8	{@XMM[6]-@XMM[7]}, [$inp]!
+
+	bl	_bsaes_decrypt8
+
+	vst1.8	{@XMM[0]-@XMM[1]}, [$out]!	@ write output
+	vst1.8	{@XMM[6]}, [$out]!
+	vst1.8	{@XMM[4]}, [$out]!
+	vst1.8	{@XMM[2]}, [$out]!
+	vst1.8	{@XMM[7]}, [$out]!
+	vst1.8	{@XMM[3]}, [$out]!
+	subs	$len,$len,#0x80
+	vst1.8	{@XMM[5]}, [$out]!
+	bhi	.Ldec128_loop
+
+	vldmia	sp!,{d8-d15}
+	ldmia	sp!,{r4-r6,pc}
+.size	bsaes_decrypt_128,.-bsaes_decrypt_128
+___
+}
+{
+my ($inp,$out,$len,$key, $ivp,$fp,$rounds)=map("r$_",(0..3,8..10));
+my ($keysched)=("sp");
+
+$code.=<<___;
+.extern AES_cbc_encrypt
+.extern AES_decrypt
+
+.global	bsaes_cbc_encrypt
+.type	bsaes_cbc_encrypt,%function
+.align	5
+bsaes_cbc_encrypt:
+#ifndef	__KERNEL__
+	cmp	$len, #128
+#ifndef	__thumb__
+	blo	AES_cbc_encrypt
+#else
+	bhs	1f
+	b	AES_cbc_encrypt
+1:
+#endif
+#endif
+
+	@ it is up to the caller to make sure we are called with enc == 0
+
+	mov	ip, sp
+	stmdb	sp!, {r4-r10, lr}
+	VFP_ABI_PUSH
+	ldr	$ivp, [ip]			@ IV is 1st arg on the stack
+	mov	$len, $len, lsr#4		@ len in 16 byte blocks
+	sub	sp, #0x10			@ scratch space to carry over the IV
+	mov	$fp, sp				@ save sp
+
+	ldr	$rounds, [$key, #240]		@ get # of rounds
+#ifndef	BSAES_ASM_EXTENDED_KEY
+	@ allocate the key schedule on the stack
+	sub	r12, sp, $rounds, lsl#7		@ 128 bytes per inner round key
+	add	r12, #`128-32`			@ sifze of bit-slices key schedule
+
+	@ populate the key schedule
+	mov	r4, $key			@ pass key
+	mov	r5, $rounds			@ pass # of rounds
+	mov	sp, r12				@ sp is $keysched
+	bl	_bsaes_key_convert
+	vldmia	$keysched, {@XMM[6]}
+	vstmia	r12,  {@XMM[15]}		@ save last round key
+	veor	@XMM[7], @XMM[7], @XMM[6]	@ fix up round 0 key
+	vstmia	$keysched, {@XMM[7]}
+#else
+	ldr	r12, [$key, #244]
+	eors	r12, #1
+	beq	0f
+
+	@ populate the key schedule
+	str	r12, [$key, #244]
+	mov	r4, $key			@ pass key
+	mov	r5, $rounds			@ pass # of rounds
+	add	r12, $key, #248			@ pass key schedule
+	bl	_bsaes_key_convert
+	add	r4, $key, #248
+	vldmia	r4, {@XMM[6]}
+	vstmia	r12, {@XMM[15]}			@ save last round key
+	veor	@XMM[7], @XMM[7], @XMM[6]	@ fix up round 0 key
+	vstmia	r4, {@XMM[7]}
+
+.align	2
+0:
+#endif
+
+	vld1.8	{@XMM[15]}, [$ivp]		@ load IV
+	b	.Lcbc_dec_loop
+
+.align	4
+.Lcbc_dec_loop:
+	subs	$len, $len, #0x8
+	bmi	.Lcbc_dec_loop_finish
+
+	vld1.8	{@XMM[0]-@XMM[1]}, [$inp]!	@ load input
+	vld1.8	{@XMM[2]-@XMM[3]}, [$inp]!
+#ifndef	BSAES_ASM_EXTENDED_KEY
+	mov	r4, $keysched			@ pass the key
+#else
+	add	r4, $key, #248
+#endif
+	vld1.8	{@XMM[4]-@XMM[5]}, [$inp]!
+	mov	r5, $rounds
+	vld1.8	{@XMM[6]-@XMM[7]}, [$inp]
+	sub	$inp, $inp, #0x60
+	vstmia	$fp, {@XMM[15]}			@ put aside IV
+
+	bl	_bsaes_decrypt8
+
+	vldmia	$fp, {@XMM[14]}			@ reload IV
+	vld1.8	{@XMM[8]-@XMM[9]}, [$inp]!	@ reload input
+	veor	@XMM[0], @XMM[0], @XMM[14]	@ ^= IV
+	vld1.8	{@XMM[10]-@XMM[11]}, [$inp]!
+	veor	@XMM[1], @XMM[1], @XMM[8]
+	veor	@XMM[6], @XMM[6], @XMM[9]
+	vld1.8	{@XMM[12]-@XMM[13]}, [$inp]!
+	veor	@XMM[4], @XMM[4], @XMM[10]
+	veor	@XMM[2], @XMM[2], @XMM[11]
+	vld1.8	{@XMM[14]-@XMM[15]}, [$inp]!
+	veor	@XMM[7], @XMM[7], @XMM[12]
+	vst1.8	{@XMM[0]-@XMM[1]}, [$out]!	@ write output
+	veor	@XMM[3], @XMM[3], @XMM[13]
+	vst1.8	{@XMM[6]}, [$out]!
+	veor	@XMM[5], @XMM[5], @XMM[14]
+	vst1.8	{@XMM[4]}, [$out]!
+	vst1.8	{@XMM[2]}, [$out]!
+	vst1.8	{@XMM[7]}, [$out]!
+	vst1.8	{@XMM[3]}, [$out]!
+	vst1.8	{@XMM[5]}, [$out]!
+
+	b	.Lcbc_dec_loop
+
+.Lcbc_dec_loop_finish:
+	adds	$len, $len, #8
+	beq	.Lcbc_dec_done
+
+	vld1.8	{@XMM[0]}, [$inp]!		@ load input
+	cmp	$len, #2
+	blo	.Lcbc_dec_one
+	vld1.8	{@XMM[1]}, [$inp]!
+#ifndef	BSAES_ASM_EXTENDED_KEY
+	mov	r4, $keysched			@ pass the key
+#else
+	add	r4, $key, #248
+#endif
+	mov	r5, $rounds
+	vstmia	$fp, {@XMM[15]}			@ put aside IV
+	beq	.Lcbc_dec_two
+	vld1.8	{@XMM[2]}, [$inp]!
+	cmp	$len, #4
+	blo	.Lcbc_dec_three
+	vld1.8	{@XMM[3]}, [$inp]!
+	beq	.Lcbc_dec_four
+	vld1.8	{@XMM[4]}, [$inp]!
+	cmp	$len, #6
+	blo	.Lcbc_dec_five
+	vld1.8	{@XMM[5]}, [$inp]!
+	beq	.Lcbc_dec_six
+	vld1.8	{@XMM[6]}, [$inp]!
+	sub	$inp, $inp, #0x70
+
+	bl	_bsaes_decrypt8
+
+	vldmia	$fp, {@XMM[14]}			@ reload IV
+	vld1.8	{@XMM[8]-@XMM[9]}, [$inp]!	@ reload input
+	veor	@XMM[0], @XMM[0], @XMM[14]	@ ^= IV
+	vld1.8	{@XMM[10]-@XMM[11]}, [$inp]!
+	veor	@XMM[1], @XMM[1], @XMM[8]
+	veor	@XMM[6], @XMM[6], @XMM[9]
+	vld1.8	{@XMM[12]-@XMM[13]}, [$inp]!
+	veor	@XMM[4], @XMM[4], @XMM[10]
+	veor	@XMM[2], @XMM[2], @XMM[11]
+	vld1.8	{@XMM[15]}, [$inp]!
+	veor	@XMM[7], @XMM[7], @XMM[12]
+	vst1.8	{@XMM[0]-@XMM[1]}, [$out]!	@ write output
+	veor	@XMM[3], @XMM[3], @XMM[13]
+	vst1.8	{@XMM[6]}, [$out]!
+	vst1.8	{@XMM[4]}, [$out]!
+	vst1.8	{@XMM[2]}, [$out]!
+	vst1.8	{@XMM[7]}, [$out]!
+	vst1.8	{@XMM[3]}, [$out]!
+	b	.Lcbc_dec_done
+.align	4
+.Lcbc_dec_six:
+	sub	$inp, $inp, #0x60
+	bl	_bsaes_decrypt8
+	vldmia	$fp,{@XMM[14]}			@ reload IV
+	vld1.8	{@XMM[8]-@XMM[9]}, [$inp]!	@ reload input
+	veor	@XMM[0], @XMM[0], @XMM[14]	@ ^= IV
+	vld1.8	{@XMM[10]-@XMM[11]}, [$inp]!
+	veor	@XMM[1], @XMM[1], @XMM[8]
+	veor	@XMM[6], @XMM[6], @XMM[9]
+	vld1.8	{@XMM[12]}, [$inp]!
+	veor	@XMM[4], @XMM[4], @XMM[10]
+	veor	@XMM[2], @XMM[2], @XMM[11]
+	vld1.8	{@XMM[15]}, [$inp]!
+	veor	@XMM[7], @XMM[7], @XMM[12]
+	vst1.8	{@XMM[0]-@XMM[1]}, [$out]!	@ write output
+	vst1.8	{@XMM[6]}, [$out]!
+	vst1.8	{@XMM[4]}, [$out]!
+	vst1.8	{@XMM[2]}, [$out]!
+	vst1.8	{@XMM[7]}, [$out]!
+	b	.Lcbc_dec_done
+.align	4
+.Lcbc_dec_five:
+	sub	$inp, $inp, #0x50
+	bl	_bsaes_decrypt8
+	vldmia	$fp, {@XMM[14]}			@ reload IV
+	vld1.8	{@XMM[8]-@XMM[9]}, [$inp]!	@ reload input
+	veor	@XMM[0], @XMM[0], @XMM[14]	@ ^= IV
+	vld1.8	{@XMM[10]-@XMM[11]}, [$inp]!
+	veor	@XMM[1], @XMM[1], @XMM[8]
+	veor	@XMM[6], @XMM[6], @XMM[9]
+	vld1.8	{@XMM[15]}, [$inp]!
+	veor	@XMM[4], @XMM[4], @XMM[10]
+	vst1.8	{@XMM[0]-@XMM[1]}, [$out]!	@ write output
+	veor	@XMM[2], @XMM[2], @XMM[11]
+	vst1.8	{@XMM[6]}, [$out]!
+	vst1.8	{@XMM[4]}, [$out]!
+	vst1.8	{@XMM[2]}, [$out]!
+	b	.Lcbc_dec_done
+.align	4
+.Lcbc_dec_four:
+	sub	$inp, $inp, #0x40
+	bl	_bsaes_decrypt8
+	vldmia	$fp, {@XMM[14]}			@ reload IV
+	vld1.8	{@XMM[8]-@XMM[9]}, [$inp]!	@ reload input
+	veor	@XMM[0], @XMM[0], @XMM[14]	@ ^= IV
+	vld1.8	{@XMM[10]}, [$inp]!
+	veor	@XMM[1], @XMM[1], @XMM[8]
+	veor	@XMM[6], @XMM[6], @XMM[9]
+	vld1.8	{@XMM[15]}, [$inp]!
+	veor	@XMM[4], @XMM[4], @XMM[10]
+	vst1.8	{@XMM[0]-@XMM[1]}, [$out]!	@ write output
+	vst1.8	{@XMM[6]}, [$out]!
+	vst1.8	{@XMM[4]}, [$out]!
+	b	.Lcbc_dec_done
+.align	4
+.Lcbc_dec_three:
+	sub	$inp, $inp, #0x30
+	bl	_bsaes_decrypt8
+	vldmia	$fp, {@XMM[14]}			@ reload IV
+	vld1.8	{@XMM[8]-@XMM[9]}, [$inp]!	@ reload input
+	veor	@XMM[0], @XMM[0], @XMM[14]	@ ^= IV
+	vld1.8	{@XMM[15]}, [$inp]!
+	veor	@XMM[1], @XMM[1], @XMM[8]
+	veor	@XMM[6], @XMM[6], @XMM[9]
+	vst1.8	{@XMM[0]-@XMM[1]}, [$out]!	@ write output
+	vst1.8	{@XMM[6]}, [$out]!
+	b	.Lcbc_dec_done
+.align	4
+.Lcbc_dec_two:
+	sub	$inp, $inp, #0x20
+	bl	_bsaes_decrypt8
+	vldmia	$fp, {@XMM[14]}			@ reload IV
+	vld1.8	{@XMM[8]}, [$inp]!		@ reload input
+	veor	@XMM[0], @XMM[0], @XMM[14]	@ ^= IV
+	vld1.8	{@XMM[15]}, [$inp]!		@ reload input
+	veor	@XMM[1], @XMM[1], @XMM[8]
+	vst1.8	{@XMM[0]-@XMM[1]}, [$out]!	@ write output
+	b	.Lcbc_dec_done
+.align	4
+.Lcbc_dec_one:
+	sub	$inp, $inp, #0x10
+	mov	$rounds, $out			@ save original out pointer
+	mov	$out, $fp			@ use the iv scratch space as out buffer
+	mov	r2, $key
+	vmov	@XMM[4],@XMM[15]		@ just in case ensure that IV
+	vmov	@XMM[5],@XMM[0]			@ and input are preserved
+	bl	AES_decrypt
+	vld1.8	{@XMM[0]}, [$fp,:64]		@ load result
+	veor	@XMM[0], @XMM[0], @XMM[4]	@ ^= IV
+	vmov	@XMM[15], @XMM[5]		@ @XMM[5] holds input
+	vst1.8	{@XMM[0]}, [$rounds]		@ write output
+
+.Lcbc_dec_done:
+#ifndef	BSAES_ASM_EXTENDED_KEY
+	vmov.i32	q0, #0
+	vmov.i32	q1, #0
+.Lcbc_dec_bzero:				@ wipe key schedule [if any]
+	vstmia		$keysched!, {q0-q1}
+	cmp		$keysched, $fp
+	bne		.Lcbc_dec_bzero
+#endif
+
+	mov	sp, $fp
+	add	sp, #0x10			@ add sp,$fp,#0x10 is no good for thumb
+	vst1.8	{@XMM[15]}, [$ivp]		@ return IV
+	VFP_ABI_POP
+	ldmia	sp!, {r4-r10, pc}
+.size	bsaes_cbc_encrypt,.-bsaes_cbc_encrypt
+___
+}
+{
+my ($inp,$out,$len,$key, $ctr,$fp,$rounds)=(map("r$_",(0..3,8..10)));
+my $const = "r6";	# shared with _bsaes_encrypt8_alt
+my $keysched = "sp";
+
+$code.=<<___;
+.extern	AES_encrypt
+.global	bsaes_ctr32_encrypt_blocks
+.type	bsaes_ctr32_encrypt_blocks,%function
+.align	5
+bsaes_ctr32_encrypt_blocks:
+	cmp	$len, #8			@ use plain AES for
+	blo	.Lctr_enc_short			@ small sizes
+
+	mov	ip, sp
+	stmdb	sp!, {r4-r10, lr}
+	VFP_ABI_PUSH
+	ldr	$ctr, [ip]			@ ctr is 1st arg on the stack
+	sub	sp, sp, #0x10			@ scratch space to carry over the ctr
+	mov	$fp, sp				@ save sp
+
+	ldr	$rounds, [$key, #240]		@ get # of rounds
+#ifndef	BSAES_ASM_EXTENDED_KEY
+	@ allocate the key schedule on the stack
+	sub	r12, sp, $rounds, lsl#7		@ 128 bytes per inner round key
+	add	r12, #`128-32`			@ size of bit-sliced key schedule
+
+	@ populate the key schedule
+	mov	r4, $key			@ pass key
+	mov	r5, $rounds			@ pass # of rounds
+	mov	sp, r12				@ sp is $keysched
+	bl	_bsaes_key_convert
+	veor	@XMM[7],@XMM[7],@XMM[15]	@ fix up last round key
+	vstmia	r12, {@XMM[7]}			@ save last round key
+
+	vld1.8	{@XMM[0]}, [$ctr]		@ load counter
+	add	$ctr, $const, #.LREVM0SR-.LM0	@ borrow $ctr
+	vldmia	$keysched, {@XMM[4]}		@ load round0 key
+#else
+	ldr	r12, [$key, #244]
+	eors	r12, #1
+	beq	0f
+
+	@ populate the key schedule
+	str	r12, [$key, #244]
+	mov	r4, $key			@ pass key
+	mov	r5, $rounds			@ pass # of rounds
+	add	r12, $key, #248			@ pass key schedule
+	bl	_bsaes_key_convert
+	veor	@XMM[7],@XMM[7],@XMM[15]	@ fix up last round key
+	vstmia	r12, {@XMM[7]}			@ save last round key
+
+.align	2
+0:	add	r12, $key, #248
+	vld1.8	{@XMM[0]}, [$ctr]		@ load counter
+	adrl	$ctr, .LREVM0SR			@ borrow $ctr
+	vldmia	r12, {@XMM[4]}			@ load round0 key
+	sub	sp, #0x10			@ place for adjusted round0 key
+#endif
+
+	vmov.i32	@XMM[8],#1		@ compose 1<<96
+	veor		@XMM[9],@XMM[9],@XMM[9]
+	vrev32.8	@XMM[0],@XMM[0]
+	vext.8		@XMM[8],@XMM[9],@XMM[8],#4
+	vrev32.8	@XMM[4],@XMM[4]
+	vadd.u32	@XMM[9],@XMM[8],@XMM[8]	@ compose 2<<96
+	vstmia	$keysched, {@XMM[4]}		@ save adjusted round0 key
+	b	.Lctr_enc_loop
+
+.align	4
+.Lctr_enc_loop:
+	vadd.u32	@XMM[10], @XMM[8], @XMM[9]	@ compose 3<<96
+	vadd.u32	@XMM[1], @XMM[0], @XMM[8]	@ +1
+	vadd.u32	@XMM[2], @XMM[0], @XMM[9]	@ +2
+	vadd.u32	@XMM[3], @XMM[0], @XMM[10]	@ +3
+	vadd.u32	@XMM[4], @XMM[1], @XMM[10]
+	vadd.u32	@XMM[5], @XMM[2], @XMM[10]
+	vadd.u32	@XMM[6], @XMM[3], @XMM[10]
+	vadd.u32	@XMM[7], @XMM[4], @XMM[10]
+	vadd.u32	@XMM[10], @XMM[5], @XMM[10]	@ next counter
+
+	@ Borrow prologue from _bsaes_encrypt8 to use the opportunity
+	@ to flip byte order in 32-bit counter
+
+	vldmia		$keysched, {@XMM[9]}		@ load round0 key
+#ifndef	BSAES_ASM_EXTENDED_KEY
+	add		r4, $keysched, #0x10		@ pass next round key
+#else
+	add		r4, $key, #`248+16`
+#endif
+	vldmia		$ctr, {@XMM[8]}			@ .LREVM0SR
+	mov		r5, $rounds			@ pass rounds
+	vstmia		$fp, {@XMM[10]}			@ save next counter
+	sub		$const, $ctr, #.LREVM0SR-.LSR	@ pass constants
+
+	bl		_bsaes_encrypt8_alt
+
+	subs		$len, $len, #8
+	blo		.Lctr_enc_loop_done
+
+	vld1.8		{@XMM[8]-@XMM[9]}, [$inp]!	@ load input
+	vld1.8		{@XMM[10]-@XMM[11]}, [$inp]!
+	veor		@XMM[0], @XMM[8]
+	veor		@XMM[1], @XMM[9]
+	vld1.8		{@XMM[12]-@XMM[13]}, [$inp]!
+	veor		@XMM[4], @XMM[10]
+	veor		@XMM[6], @XMM[11]
+	vld1.8		{@XMM[14]-@XMM[15]}, [$inp]!
+	veor		@XMM[3], @XMM[12]
+	vst1.8		{@XMM[0]-@XMM[1]}, [$out]!	@ write output
+	veor		@XMM[7], @XMM[13]
+	veor		@XMM[2], @XMM[14]
+	vst1.8		{@XMM[4]}, [$out]!
+	veor		@XMM[5], @XMM[15]
+	vst1.8		{@XMM[6]}, [$out]!
+	vmov.i32	@XMM[8], #1			@ compose 1<<96
+	vst1.8		{@XMM[3]}, [$out]!
+	veor		@XMM[9], @XMM[9], @XMM[9]
+	vst1.8		{@XMM[7]}, [$out]!
+	vext.8		@XMM[8], @XMM[9], @XMM[8], #4
+	vst1.8		{@XMM[2]}, [$out]!
+	vadd.u32	@XMM[9],@XMM[8],@XMM[8]		@ compose 2<<96
+	vst1.8		{@XMM[5]}, [$out]!
+	vldmia		$fp, {@XMM[0]}			@ load counter
+
+	bne		.Lctr_enc_loop
+	b		.Lctr_enc_done
+
+.align	4
+.Lctr_enc_loop_done:
+	add		$len, $len, #8
+	vld1.8		{@XMM[8]}, [$inp]!	@ load input
+	veor		@XMM[0], @XMM[8]
+	vst1.8		{@XMM[0]}, [$out]!	@ write output
+	cmp		$len, #2
+	blo		.Lctr_enc_done
+	vld1.8		{@XMM[9]}, [$inp]!
+	veor		@XMM[1], @XMM[9]
+	vst1.8		{@XMM[1]}, [$out]!
+	beq		.Lctr_enc_done
+	vld1.8		{@XMM[10]}, [$inp]!
+	veor		@XMM[4], @XMM[10]
+	vst1.8		{@XMM[4]}, [$out]!
+	cmp		$len, #4
+	blo		.Lctr_enc_done
+	vld1.8		{@XMM[11]}, [$inp]!
+	veor		@XMM[6], @XMM[11]
+	vst1.8		{@XMM[6]}, [$out]!
+	beq		.Lctr_enc_done
+	vld1.8		{@XMM[12]}, [$inp]!
+	veor		@XMM[3], @XMM[12]
+	vst1.8		{@XMM[3]}, [$out]!
+	cmp		$len, #6
+	blo		.Lctr_enc_done
+	vld1.8		{@XMM[13]}, [$inp]!
+	veor		@XMM[7], @XMM[13]
+	vst1.8		{@XMM[7]}, [$out]!
+	beq		.Lctr_enc_done
+	vld1.8		{@XMM[14]}, [$inp]
+	veor		@XMM[2], @XMM[14]
+	vst1.8		{@XMM[2]}, [$out]!
+
+.Lctr_enc_done:
+	vmov.i32	q0, #0
+	vmov.i32	q1, #0
+#ifndef	BSAES_ASM_EXTENDED_KEY
+.Lctr_enc_bzero:			@ wipe key schedule [if any]
+	vstmia		$keysched!, {q0-q1}
+	cmp		$keysched, $fp
+	bne		.Lctr_enc_bzero
+#else
+	vstmia		$keysched, {q0-q1}
+#endif
+
+	mov	sp, $fp
+	add	sp, #0x10		@ add sp,$fp,#0x10 is no good for thumb
+	VFP_ABI_POP
+	ldmia	sp!, {r4-r10, pc}	@ return
+
+.align	4
+.Lctr_enc_short:
+	ldr	ip, [sp]		@ ctr pointer is passed on stack
+	stmdb	sp!, {r4-r8, lr}
+
+	mov	r4, $inp		@ copy arguments
+	mov	r5, $out
+	mov	r6, $len
+	mov	r7, $key
+	ldr	r8, [ip, #12]		@ load counter LSW
+	vld1.8	{@XMM[1]}, [ip]		@ load whole counter value
+#ifdef __ARMEL__
+	rev	r8, r8
+#endif
+	sub	sp, sp, #0x10
+	vst1.8	{@XMM[1]}, [sp,:64]	@ copy counter value
+	sub	sp, sp, #0x10
+
+.Lctr_enc_short_loop:
+	add	r0, sp, #0x10		@ input counter value
+	mov	r1, sp			@ output on the stack
+	mov	r2, r7			@ key
+
+	bl	AES_encrypt
+
+	vld1.8	{@XMM[0]}, [r4]!	@ load input
+	vld1.8	{@XMM[1]}, [sp,:64]	@ load encrypted counter
+	add	r8, r8, #1
+#ifdef __ARMEL__
+	rev	r0, r8
+	str	r0, [sp, #0x1c]		@ next counter value
+#else
+	str	r8, [sp, #0x1c]		@ next counter value
+#endif
+	veor	@XMM[0],@XMM[0],@XMM[1]
+	vst1.8	{@XMM[0]}, [r5]!	@ store output
+	subs	r6, r6, #1
+	bne	.Lctr_enc_short_loop
+
+	vmov.i32	q0, #0
+	vmov.i32	q1, #0
+	vstmia		sp!, {q0-q1}
+
+	ldmia	sp!, {r4-r8, pc}
+.size	bsaes_ctr32_encrypt_blocks,.-bsaes_ctr32_encrypt_blocks
+___
+}
+{
+######################################################################
+# void bsaes_xts_[en|de]crypt(const char *inp,char *out,size_t len,
+#	const AES_KEY *key1, const AES_KEY *key2,
+#	const unsigned char iv[16]);
+#
+my ($inp,$out,$len,$key,$rounds,$magic,$fp)=(map("r$_",(7..10,1..3)));
+my $const="r6";		# returned by _bsaes_key_convert
+my $twmask=@XMM[5];
+my @T=@XMM[6..7];
+
+$code.=<<___;
+.globl	bsaes_xts_encrypt
+.type	bsaes_xts_encrypt,%function
+.align	4
+bsaes_xts_encrypt:
+	mov	ip, sp
+	stmdb	sp!, {r4-r10, lr}		@ 0x20
+	VFP_ABI_PUSH
+	mov	r6, sp				@ future $fp
+
+	mov	$inp, r0
+	mov	$out, r1
+	mov	$len, r2
+	mov	$key, r3
+
+	sub	r0, sp, #0x10			@ 0x10
+	bic	r0, #0xf			@ align at 16 bytes
+	mov	sp, r0
+
+#ifdef	XTS_CHAIN_TWEAK
+	ldr	r0, [ip]			@ pointer to input tweak
+#else
+	@ generate initial tweak
+	ldr	r0, [ip, #4]			@ iv[]
+	mov	r1, sp
+	ldr	r2, [ip, #0]			@ key2
+	bl	AES_encrypt
+	mov	r0,sp				@ pointer to initial tweak
+#endif
+
+	ldr	$rounds, [$key, #240]		@ get # of rounds
+	mov	$fp, r6
+#ifndef	BSAES_ASM_EXTENDED_KEY
+	@ allocate the key schedule on the stack
+	sub	r12, sp, $rounds, lsl#7		@ 128 bytes per inner round key
+	@ add	r12, #`128-32`			@ size of bit-sliced key schedule
+	sub	r12, #`32+16`			@ place for tweak[9]
+
+	@ populate the key schedule
+	mov	r4, $key			@ pass key
+	mov	r5, $rounds			@ pass # of rounds
+	mov	sp, r12
+	add	r12, #0x90			@ pass key schedule
+	bl	_bsaes_key_convert
+	veor	@XMM[7], @XMM[7], @XMM[15]	@ fix up last round key
+	vstmia	r12, {@XMM[7]}			@ save last round key
+#else
+	ldr	r12, [$key, #244]
+	eors	r12, #1
+	beq	0f
+
+	str	r12, [$key, #244]
+	mov	r4, $key			@ pass key
+	mov	r5, $rounds			@ pass # of rounds
+	add	r12, $key, #248			@ pass key schedule
+	bl	_bsaes_key_convert
+	veor	@XMM[7], @XMM[7], @XMM[15]	@ fix up last round key
+	vstmia	r12, {@XMM[7]}
+
+.align	2
+0:	sub	sp, #0x90			@ place for tweak[9]
+#endif
+
+	vld1.8	{@XMM[8]}, [r0]			@ initial tweak
+	adr	$magic, .Lxts_magic
+
+	subs	$len, #0x80
+	blo	.Lxts_enc_short
+	b	.Lxts_enc_loop
+
+.align	4
+.Lxts_enc_loop:
+	vldmia		$magic, {$twmask}	@ load XTS magic
+	vshr.s64	@T[0], @XMM[8], #63
+	mov		r0, sp
+	vand		@T[0], @T[0], $twmask
+___
+for($i=9;$i<16;$i++) {
+$code.=<<___;
+	vadd.u64	@XMM[$i], @XMM[$i-1], @XMM[$i-1]
+	vst1.64		{@XMM[$i-1]}, [r0,:128]!
+	vswp		`&Dhi("@T[0]")`,`&Dlo("@T[0]")`
+	vshr.s64	@T[1], @XMM[$i], #63
+	veor		@XMM[$i], @XMM[$i], @T[0]
+	vand		@T[1], @T[1], $twmask
+___
+	@T=reverse(@T);
+
+$code.=<<___ if ($i>=10);
+	vld1.8		{@XMM[$i-10]}, [$inp]!
+___
+$code.=<<___ if ($i>=11);
+	veor		@XMM[$i-11], @XMM[$i-11], @XMM[$i-3]
+___
+}
+$code.=<<___;
+	vadd.u64	@XMM[8], @XMM[15], @XMM[15]
+	vst1.64		{@XMM[15]}, [r0,:128]!
+	vswp		`&Dhi("@T[0]")`,`&Dlo("@T[0]")`
+	veor		@XMM[8], @XMM[8], @T[0]
+	vst1.64		{@XMM[8]}, [r0,:128]		@ next round tweak
+
+	vld1.8		{@XMM[6]-@XMM[7]}, [$inp]!
+	veor		@XMM[5], @XMM[5], @XMM[13]
+#ifndef	BSAES_ASM_EXTENDED_KEY
+	add		r4, sp, #0x90			@ pass key schedule
+#else
+	add		r4, $key, #248			@ pass key schedule
+#endif
+	veor		@XMM[6], @XMM[6], @XMM[14]
+	mov		r5, $rounds			@ pass rounds
+	veor		@XMM[7], @XMM[7], @XMM[15]
+	mov		r0, sp
+
+	bl		_bsaes_encrypt8
+
+	vld1.64		{@XMM[ 8]-@XMM[ 9]}, [r0,:128]!
+	vld1.64		{@XMM[10]-@XMM[11]}, [r0,:128]!
+	veor		@XMM[0], @XMM[0], @XMM[ 8]
+	vld1.64		{@XMM[12]-@XMM[13]}, [r0,:128]!
+	veor		@XMM[1], @XMM[1], @XMM[ 9]
+	veor		@XMM[8], @XMM[4], @XMM[10]
+	vst1.8		{@XMM[0]-@XMM[1]}, [$out]!
+	veor		@XMM[9], @XMM[6], @XMM[11]
+	vld1.64		{@XMM[14]-@XMM[15]}, [r0,:128]!
+	veor		@XMM[10], @XMM[3], @XMM[12]
+	vst1.8		{@XMM[8]-@XMM[9]}, [$out]!
+	veor		@XMM[11], @XMM[7], @XMM[13]
+	veor		@XMM[12], @XMM[2], @XMM[14]
+	vst1.8		{@XMM[10]-@XMM[11]}, [$out]!
+	veor		@XMM[13], @XMM[5], @XMM[15]
+	vst1.8		{@XMM[12]-@XMM[13]}, [$out]!
+
+	vld1.64		{@XMM[8]}, [r0,:128]		@ next round tweak
+
+	subs		$len, #0x80
+	bpl		.Lxts_enc_loop
+
+.Lxts_enc_short:
+	adds		$len, #0x70
+	bmi		.Lxts_enc_done
+
+	vldmia		$magic, {$twmask}	@ load XTS magic
+	vshr.s64	@T[0], @XMM[8], #63
+	mov		r0, sp
+	vand		@T[0], @T[0], $twmask
+___
+for($i=9;$i<16;$i++) {
+$code.=<<___;
+	vadd.u64	@XMM[$i], @XMM[$i-1], @XMM[$i-1]
+	vst1.64		{@XMM[$i-1]}, [r0,:128]!
+	vswp		`&Dhi("@T[0]")`,`&Dlo("@T[0]")`
+	vshr.s64	@T[1], @XMM[$i], #63
+	veor		@XMM[$i], @XMM[$i], @T[0]
+	vand		@T[1], @T[1], $twmask
+___
+	@T=reverse(@T);
+
+$code.=<<___ if ($i>=10);
+	vld1.8		{@XMM[$i-10]}, [$inp]!
+	subs		$len, #0x10
+	bmi		.Lxts_enc_`$i-9`
+___
+$code.=<<___ if ($i>=11);
+	veor		@XMM[$i-11], @XMM[$i-11], @XMM[$i-3]
+___
+}
+$code.=<<___;
+	sub		$len, #0x10
+	vst1.64		{@XMM[15]}, [r0,:128]		@ next round tweak
+
+	vld1.8		{@XMM[6]}, [$inp]!
+	veor		@XMM[5], @XMM[5], @XMM[13]
+#ifndef	BSAES_ASM_EXTENDED_KEY
+	add		r4, sp, #0x90			@ pass key schedule
+#else
+	add		r4, $key, #248			@ pass key schedule
+#endif
+	veor		@XMM[6], @XMM[6], @XMM[14]
+	mov		r5, $rounds			@ pass rounds
+	mov		r0, sp
+
+	bl		_bsaes_encrypt8
+
+	vld1.64		{@XMM[ 8]-@XMM[ 9]}, [r0,:128]!
+	vld1.64		{@XMM[10]-@XMM[11]}, [r0,:128]!
+	veor		@XMM[0], @XMM[0], @XMM[ 8]
+	vld1.64		{@XMM[12]-@XMM[13]}, [r0,:128]!
+	veor		@XMM[1], @XMM[1], @XMM[ 9]
+	veor		@XMM[8], @XMM[4], @XMM[10]
+	vst1.8		{@XMM[0]-@XMM[1]}, [$out]!
+	veor		@XMM[9], @XMM[6], @XMM[11]
+	vld1.64		{@XMM[14]}, [r0,:128]!
+	veor		@XMM[10], @XMM[3], @XMM[12]
+	vst1.8		{@XMM[8]-@XMM[9]}, [$out]!
+	veor		@XMM[11], @XMM[7], @XMM[13]
+	veor		@XMM[12], @XMM[2], @XMM[14]
+	vst1.8		{@XMM[10]-@XMM[11]}, [$out]!
+	vst1.8		{@XMM[12]}, [$out]!
+
+	vld1.64		{@XMM[8]}, [r0,:128]		@ next round tweak
+	b		.Lxts_enc_done
+.align	4
+.Lxts_enc_6:
+	vst1.64		{@XMM[14]}, [r0,:128]		@ next round tweak
+
+	veor		@XMM[4], @XMM[4], @XMM[12]
+#ifndef	BSAES_ASM_EXTENDED_KEY
+	add		r4, sp, #0x90			@ pass key schedule
+#else
+	add		r4, $key, #248			@ pass key schedule
+#endif
+	veor		@XMM[5], @XMM[5], @XMM[13]
+	mov		r5, $rounds			@ pass rounds
+	mov		r0, sp
+
+	bl		_bsaes_encrypt8
+
+	vld1.64		{@XMM[ 8]-@XMM[ 9]}, [r0,:128]!
+	vld1.64		{@XMM[10]-@XMM[11]}, [r0,:128]!
+	veor		@XMM[0], @XMM[0], @XMM[ 8]
+	vld1.64		{@XMM[12]-@XMM[13]}, [r0,:128]!
+	veor		@XMM[1], @XMM[1], @XMM[ 9]
+	veor		@XMM[8], @XMM[4], @XMM[10]
+	vst1.8		{@XMM[0]-@XMM[1]}, [$out]!
+	veor		@XMM[9], @XMM[6], @XMM[11]
+	veor		@XMM[10], @XMM[3], @XMM[12]
+	vst1.8		{@XMM[8]-@XMM[9]}, [$out]!
+	veor		@XMM[11], @XMM[7], @XMM[13]
+	vst1.8		{@XMM[10]-@XMM[11]}, [$out]!
+
+	vld1.64		{@XMM[8]}, [r0,:128]		@ next round tweak
+	b		.Lxts_enc_done
+
+@ put this in range for both ARM and Thumb mode adr instructions
+.align	5
+.Lxts_magic:
+	.quad	1, 0x87
+
+.align	5
+.Lxts_enc_5:
+	vst1.64		{@XMM[13]}, [r0,:128]		@ next round tweak
+
+	veor		@XMM[3], @XMM[3], @XMM[11]
+#ifndef	BSAES_ASM_EXTENDED_KEY
+	add		r4, sp, #0x90			@ pass key schedule
+#else
+	add		r4, $key, #248			@ pass key schedule
+#endif
+	veor		@XMM[4], @XMM[4], @XMM[12]
+	mov		r5, $rounds			@ pass rounds
+	mov		r0, sp
+
+	bl		_bsaes_encrypt8
+
+	vld1.64		{@XMM[ 8]-@XMM[ 9]}, [r0,:128]!
+	vld1.64		{@XMM[10]-@XMM[11]}, [r0,:128]!
+	veor		@XMM[0], @XMM[0], @XMM[ 8]
+	vld1.64		{@XMM[12]}, [r0,:128]!
+	veor		@XMM[1], @XMM[1], @XMM[ 9]
+	veor		@XMM[8], @XMM[4], @XMM[10]
+	vst1.8		{@XMM[0]-@XMM[1]}, [$out]!
+	veor		@XMM[9], @XMM[6], @XMM[11]
+	veor		@XMM[10], @XMM[3], @XMM[12]
+	vst1.8		{@XMM[8]-@XMM[9]}, [$out]!
+	vst1.8		{@XMM[10]}, [$out]!
+
+	vld1.64		{@XMM[8]}, [r0,:128]		@ next round tweak
+	b		.Lxts_enc_done
+.align	4
+.Lxts_enc_4:
+	vst1.64		{@XMM[12]}, [r0,:128]		@ next round tweak
+
+	veor		@XMM[2], @XMM[2], @XMM[10]
+#ifndef	BSAES_ASM_EXTENDED_KEY
+	add		r4, sp, #0x90			@ pass key schedule
+#else
+	add		r4, $key, #248			@ pass key schedule
+#endif
+	veor		@XMM[3], @XMM[3], @XMM[11]
+	mov		r5, $rounds			@ pass rounds
+	mov		r0, sp
+
+	bl		_bsaes_encrypt8
+
+	vld1.64		{@XMM[ 8]-@XMM[ 9]}, [r0,:128]!
+	vld1.64		{@XMM[10]-@XMM[11]}, [r0,:128]!
+	veor		@XMM[0], @XMM[0], @XMM[ 8]
+	veor		@XMM[1], @XMM[1], @XMM[ 9]
+	veor		@XMM[8], @XMM[4], @XMM[10]
+	vst1.8		{@XMM[0]-@XMM[1]}, [$out]!
+	veor		@XMM[9], @XMM[6], @XMM[11]
+	vst1.8		{@XMM[8]-@XMM[9]}, [$out]!
+
+	vld1.64		{@XMM[8]}, [r0,:128]		@ next round tweak
+	b		.Lxts_enc_done
+.align	4
+.Lxts_enc_3:
+	vst1.64		{@XMM[11]}, [r0,:128]		@ next round tweak
+
+	veor		@XMM[1], @XMM[1], @XMM[9]
+#ifndef	BSAES_ASM_EXTENDED_KEY
+	add		r4, sp, #0x90			@ pass key schedule
+#else
+	add		r4, $key, #248			@ pass key schedule
+#endif
+	veor		@XMM[2], @XMM[2], @XMM[10]
+	mov		r5, $rounds			@ pass rounds
+	mov		r0, sp
+
+	bl		_bsaes_encrypt8
+
+	vld1.64		{@XMM[8]-@XMM[9]}, [r0,:128]!
+	vld1.64		{@XMM[10]}, [r0,:128]!
+	veor		@XMM[0], @XMM[0], @XMM[ 8]
+	veor		@XMM[1], @XMM[1], @XMM[ 9]
+	veor		@XMM[8], @XMM[4], @XMM[10]
+	vst1.8		{@XMM[0]-@XMM[1]}, [$out]!
+	vst1.8		{@XMM[8]}, [$out]!
+
+	vld1.64		{@XMM[8]}, [r0,:128]		@ next round tweak
+	b		.Lxts_enc_done
+.align	4
+.Lxts_enc_2:
+	vst1.64		{@XMM[10]}, [r0,:128]		@ next round tweak
+
+	veor		@XMM[0], @XMM[0], @XMM[8]
+#ifndef	BSAES_ASM_EXTENDED_KEY
+	add		r4, sp, #0x90			@ pass key schedule
+#else
+	add		r4, $key, #248			@ pass key schedule
+#endif
+	veor		@XMM[1], @XMM[1], @XMM[9]
+	mov		r5, $rounds			@ pass rounds
+	mov		r0, sp
+
+	bl		_bsaes_encrypt8
+
+	vld1.64		{@XMM[8]-@XMM[9]}, [r0,:128]!
+	veor		@XMM[0], @XMM[0], @XMM[ 8]
+	veor		@XMM[1], @XMM[1], @XMM[ 9]
+	vst1.8		{@XMM[0]-@XMM[1]}, [$out]!
+
+	vld1.64		{@XMM[8]}, [r0,:128]		@ next round tweak
+	b		.Lxts_enc_done
+.align	4
+.Lxts_enc_1:
+	mov		r0, sp
+	veor		@XMM[0], @XMM[8]
+	mov		r1, sp
+	vst1.8		{@XMM[0]}, [sp,:128]
+	mov		r2, $key
+	mov		r4, $fp				@ preserve fp
+
+	bl		AES_encrypt
+
+	vld1.8		{@XMM[0]}, [sp,:128]
+	veor		@XMM[0], @XMM[0], @XMM[8]
+	vst1.8		{@XMM[0]}, [$out]!
+	mov		$fp, r4
+
+	vmov		@XMM[8], @XMM[9]		@ next round tweak
+
+.Lxts_enc_done:
+#ifndef	XTS_CHAIN_TWEAK
+	adds		$len, #0x10
+	beq		.Lxts_enc_ret
+	sub		r6, $out, #0x10
+
+.Lxts_enc_steal:
+	ldrb		r0, [$inp], #1
+	ldrb		r1, [$out, #-0x10]
+	strb		r0, [$out, #-0x10]
+	strb		r1, [$out], #1
+
+	subs		$len, #1
+	bhi		.Lxts_enc_steal
+
+	vld1.8		{@XMM[0]}, [r6]
+	mov		r0, sp
+	veor		@XMM[0], @XMM[0], @XMM[8]
+	mov		r1, sp
+	vst1.8		{@XMM[0]}, [sp,:128]
+	mov		r2, $key
+	mov		r4, $fp			@ preserve fp
+
+	bl		AES_encrypt
+
+	vld1.8		{@XMM[0]}, [sp,:128]
+	veor		@XMM[0], @XMM[0], @XMM[8]
+	vst1.8		{@XMM[0]}, [r6]
+	mov		$fp, r4
+#endif
+
+.Lxts_enc_ret:
+	bic		r0, $fp, #0xf
+	vmov.i32	q0, #0
+	vmov.i32	q1, #0
+#ifdef	XTS_CHAIN_TWEAK
+	ldr		r1, [$fp, #0x20+VFP_ABI_FRAME]	@ chain tweak
+#endif
+.Lxts_enc_bzero:				@ wipe key schedule [if any]
+	vstmia		sp!, {q0-q1}
+	cmp		sp, r0
+	bne		.Lxts_enc_bzero
+
+	mov		sp, $fp
+#ifdef	XTS_CHAIN_TWEAK
+	vst1.8		{@XMM[8]}, [r1]
+#endif
+	VFP_ABI_POP
+	ldmia		sp!, {r4-r10, pc}	@ return
+
+.size	bsaes_xts_encrypt,.-bsaes_xts_encrypt
+
+.globl	bsaes_xts_decrypt
+.type	bsaes_xts_decrypt,%function
+.align	4
+bsaes_xts_decrypt:
+	mov	ip, sp
+	stmdb	sp!, {r4-r10, lr}		@ 0x20
+	VFP_ABI_PUSH
+	mov	r6, sp				@ future $fp
+
+	mov	$inp, r0
+	mov	$out, r1
+	mov	$len, r2
+	mov	$key, r3
+
+	sub	r0, sp, #0x10			@ 0x10
+	bic	r0, #0xf			@ align at 16 bytes
+	mov	sp, r0
+
+#ifdef	XTS_CHAIN_TWEAK
+	ldr	r0, [ip]			@ pointer to input tweak
+#else
+	@ generate initial tweak
+	ldr	r0, [ip, #4]			@ iv[]
+	mov	r1, sp
+	ldr	r2, [ip, #0]			@ key2
+	bl	AES_encrypt
+	mov	r0, sp				@ pointer to initial tweak
+#endif
+
+	ldr	$rounds, [$key, #240]		@ get # of rounds
+	mov	$fp, r6
+#ifndef	BSAES_ASM_EXTENDED_KEY
+	@ allocate the key schedule on the stack
+	sub	r12, sp, $rounds, lsl#7		@ 128 bytes per inner round key
+	@ add	r12, #`128-32`			@ size of bit-sliced key schedule
+	sub	r12, #`32+16`			@ place for tweak[9]
+
+	@ populate the key schedule
+	mov	r4, $key			@ pass key
+	mov	r5, $rounds			@ pass # of rounds
+	mov	sp, r12
+	add	r12, #0x90			@ pass key schedule
+	bl	_bsaes_key_convert
+	add	r4, sp, #0x90
+	vldmia	r4, {@XMM[6]}
+	vstmia	r12,  {@XMM[15]}		@ save last round key
+	veor	@XMM[7], @XMM[7], @XMM[6]	@ fix up round 0 key
+	vstmia	r4, {@XMM[7]}
+#else
+	ldr	r12, [$key, #244]
+	eors	r12, #1
+	beq	0f
+
+	str	r12, [$key, #244]
+	mov	r4, $key			@ pass key
+	mov	r5, $rounds			@ pass # of rounds
+	add	r12, $key, #248			@ pass key schedule
+	bl	_bsaes_key_convert
+	add	r4, $key, #248
+	vldmia	r4, {@XMM[6]}
+	vstmia	r12,  {@XMM[15]}		@ save last round key
+	veor	@XMM[7], @XMM[7], @XMM[6]	@ fix up round 0 key
+	vstmia	r4, {@XMM[7]}
+
+.align	2
+0:	sub	sp, #0x90			@ place for tweak[9]
+#endif
+	vld1.8	{@XMM[8]}, [r0]			@ initial tweak
+	adr	$magic, .Lxts_magic
+
+	tst	$len, #0xf			@ if not multiple of 16
+	it	ne				@ Thumb2 thing, sanity check in ARM
+	subne	$len, #0x10			@ subtract another 16 bytes
+	subs	$len, #0x80
+
+	blo	.Lxts_dec_short
+	b	.Lxts_dec_loop
+
+.align	4
+.Lxts_dec_loop:
+	vldmia		$magic, {$twmask}	@ load XTS magic
+	vshr.s64	@T[0], @XMM[8], #63
+	mov		r0, sp
+	vand		@T[0], @T[0], $twmask
+___
+for($i=9;$i<16;$i++) {
+$code.=<<___;
+	vadd.u64	@XMM[$i], @XMM[$i-1], @XMM[$i-1]
+	vst1.64		{@XMM[$i-1]}, [r0,:128]!
+	vswp		`&Dhi("@T[0]")`,`&Dlo("@T[0]")`
+	vshr.s64	@T[1], @XMM[$i], #63
+	veor		@XMM[$i], @XMM[$i], @T[0]
+	vand		@T[1], @T[1], $twmask
+___
+	@T=reverse(@T);
+
+$code.=<<___ if ($i>=10);
+	vld1.8		{@XMM[$i-10]}, [$inp]!
+___
+$code.=<<___ if ($i>=11);
+	veor		@XMM[$i-11], @XMM[$i-11], @XMM[$i-3]
+___
+}
+$code.=<<___;
+	vadd.u64	@XMM[8], @XMM[15], @XMM[15]
+	vst1.64		{@XMM[15]}, [r0,:128]!
+	vswp		`&Dhi("@T[0]")`,`&Dlo("@T[0]")`
+	veor		@XMM[8], @XMM[8], @T[0]
+	vst1.64		{@XMM[8]}, [r0,:128]		@ next round tweak
+
+	vld1.8		{@XMM[6]-@XMM[7]}, [$inp]!
+	veor		@XMM[5], @XMM[5], @XMM[13]
+#ifndef	BSAES_ASM_EXTENDED_KEY
+	add		r4, sp, #0x90			@ pass key schedule
+#else
+	add		r4, $key, #248			@ pass key schedule
+#endif
+	veor		@XMM[6], @XMM[6], @XMM[14]
+	mov		r5, $rounds			@ pass rounds
+	veor		@XMM[7], @XMM[7], @XMM[15]
+	mov		r0, sp
+
+	bl		_bsaes_decrypt8
+
+	vld1.64		{@XMM[ 8]-@XMM[ 9]}, [r0,:128]!
+	vld1.64		{@XMM[10]-@XMM[11]}, [r0,:128]!
+	veor		@XMM[0], @XMM[0], @XMM[ 8]
+	vld1.64		{@XMM[12]-@XMM[13]}, [r0,:128]!
+	veor		@XMM[1], @XMM[1], @XMM[ 9]
+	veor		@XMM[8], @XMM[6], @XMM[10]
+	vst1.8		{@XMM[0]-@XMM[1]}, [$out]!
+	veor		@XMM[9], @XMM[4], @XMM[11]
+	vld1.64		{@XMM[14]-@XMM[15]}, [r0,:128]!
+	veor		@XMM[10], @XMM[2], @XMM[12]
+	vst1.8		{@XMM[8]-@XMM[9]}, [$out]!
+	veor		@XMM[11], @XMM[7], @XMM[13]
+	veor		@XMM[12], @XMM[3], @XMM[14]
+	vst1.8		{@XMM[10]-@XMM[11]}, [$out]!
+	veor		@XMM[13], @XMM[5], @XMM[15]
+	vst1.8		{@XMM[12]-@XMM[13]}, [$out]!
+
+	vld1.64		{@XMM[8]}, [r0,:128]		@ next round tweak
+
+	subs		$len, #0x80
+	bpl		.Lxts_dec_loop
+
+.Lxts_dec_short:
+	adds		$len, #0x70
+	bmi		.Lxts_dec_done
+
+	vldmia		$magic, {$twmask}	@ load XTS magic
+	vshr.s64	@T[0], @XMM[8], #63
+	mov		r0, sp
+	vand		@T[0], @T[0], $twmask
+___
+for($i=9;$i<16;$i++) {
+$code.=<<___;
+	vadd.u64	@XMM[$i], @XMM[$i-1], @XMM[$i-1]
+	vst1.64		{@XMM[$i-1]}, [r0,:128]!
+	vswp		`&Dhi("@T[0]")`,`&Dlo("@T[0]")`
+	vshr.s64	@T[1], @XMM[$i], #63
+	veor		@XMM[$i], @XMM[$i], @T[0]
+	vand		@T[1], @T[1], $twmask
+___
+	@T=reverse(@T);
+
+$code.=<<___ if ($i>=10);
+	vld1.8		{@XMM[$i-10]}, [$inp]!
+	subs		$len, #0x10
+	bmi		.Lxts_dec_`$i-9`
+___
+$code.=<<___ if ($i>=11);
+	veor		@XMM[$i-11], @XMM[$i-11], @XMM[$i-3]
+___
+}
+$code.=<<___;
+	sub		$len, #0x10
+	vst1.64		{@XMM[15]}, [r0,:128]		@ next round tweak
+
+	vld1.8		{@XMM[6]}, [$inp]!
+	veor		@XMM[5], @XMM[5], @XMM[13]
+#ifndef	BSAES_ASM_EXTENDED_KEY
+	add		r4, sp, #0x90			@ pass key schedule
+#else
+	add		r4, $key, #248			@ pass key schedule
+#endif
+	veor		@XMM[6], @XMM[6], @XMM[14]
+	mov		r5, $rounds			@ pass rounds
+	mov		r0, sp
+
+	bl		_bsaes_decrypt8
+
+	vld1.64		{@XMM[ 8]-@XMM[ 9]}, [r0,:128]!
+	vld1.64		{@XMM[10]-@XMM[11]}, [r0,:128]!
+	veor		@XMM[0], @XMM[0], @XMM[ 8]
+	vld1.64		{@XMM[12]-@XMM[13]}, [r0,:128]!
+	veor		@XMM[1], @XMM[1], @XMM[ 9]
+	veor		@XMM[8], @XMM[6], @XMM[10]
+	vst1.8		{@XMM[0]-@XMM[1]}, [$out]!
+	veor		@XMM[9], @XMM[4], @XMM[11]
+	vld1.64		{@XMM[14]}, [r0,:128]!
+	veor		@XMM[10], @XMM[2], @XMM[12]
+	vst1.8		{@XMM[8]-@XMM[9]}, [$out]!
+	veor		@XMM[11], @XMM[7], @XMM[13]
+	veor		@XMM[12], @XMM[3], @XMM[14]
+	vst1.8		{@XMM[10]-@XMM[11]}, [$out]!
+	vst1.8		{@XMM[12]}, [$out]!
+
+	vld1.64		{@XMM[8]}, [r0,:128]		@ next round tweak
+	b		.Lxts_dec_done
+.align	4
+.Lxts_dec_6:
+	vst1.64		{@XMM[14]}, [r0,:128]		@ next round tweak
+
+	veor		@XMM[4], @XMM[4], @XMM[12]
+#ifndef	BSAES_ASM_EXTENDED_KEY
+	add		r4, sp, #0x90			@ pass key schedule
+#else
+	add		r4, $key, #248			@ pass key schedule
+#endif
+	veor		@XMM[5], @XMM[5], @XMM[13]
+	mov		r5, $rounds			@ pass rounds
+	mov		r0, sp
+
+	bl		_bsaes_decrypt8
+
+	vld1.64		{@XMM[ 8]-@XMM[ 9]}, [r0,:128]!
+	vld1.64		{@XMM[10]-@XMM[11]}, [r0,:128]!
+	veor		@XMM[0], @XMM[0], @XMM[ 8]
+	vld1.64		{@XMM[12]-@XMM[13]}, [r0,:128]!
+	veor		@XMM[1], @XMM[1], @XMM[ 9]
+	veor		@XMM[8], @XMM[6], @XMM[10]
+	vst1.8		{@XMM[0]-@XMM[1]}, [$out]!
+	veor		@XMM[9], @XMM[4], @XMM[11]
+	veor		@XMM[10], @XMM[2], @XMM[12]
+	vst1.8		{@XMM[8]-@XMM[9]}, [$out]!
+	veor		@XMM[11], @XMM[7], @XMM[13]
+	vst1.8		{@XMM[10]-@XMM[11]}, [$out]!
+
+	vld1.64		{@XMM[8]}, [r0,:128]		@ next round tweak
+	b		.Lxts_dec_done
+.align	4
+.Lxts_dec_5:
+	vst1.64		{@XMM[13]}, [r0,:128]		@ next round tweak
+
+	veor		@XMM[3], @XMM[3], @XMM[11]
+#ifndef	BSAES_ASM_EXTENDED_KEY
+	add		r4, sp, #0x90			@ pass key schedule
+#else
+	add		r4, $key, #248			@ pass key schedule
+#endif
+	veor		@XMM[4], @XMM[4], @XMM[12]
+	mov		r5, $rounds			@ pass rounds
+	mov		r0, sp
+
+	bl		_bsaes_decrypt8
+
+	vld1.64		{@XMM[ 8]-@XMM[ 9]}, [r0,:128]!
+	vld1.64		{@XMM[10]-@XMM[11]}, [r0,:128]!
+	veor		@XMM[0], @XMM[0], @XMM[ 8]
+	vld1.64		{@XMM[12]}, [r0,:128]!
+	veor		@XMM[1], @XMM[1], @XMM[ 9]
+	veor		@XMM[8], @XMM[6], @XMM[10]
+	vst1.8		{@XMM[0]-@XMM[1]}, [$out]!
+	veor		@XMM[9], @XMM[4], @XMM[11]
+	veor		@XMM[10], @XMM[2], @XMM[12]
+	vst1.8		{@XMM[8]-@XMM[9]}, [$out]!
+	vst1.8		{@XMM[10]}, [$out]!
+
+	vld1.64		{@XMM[8]}, [r0,:128]		@ next round tweak
+	b		.Lxts_dec_done
+.align	4
+.Lxts_dec_4:
+	vst1.64		{@XMM[12]}, [r0,:128]		@ next round tweak
+
+	veor		@XMM[2], @XMM[2], @XMM[10]
+#ifndef	BSAES_ASM_EXTENDED_KEY
+	add		r4, sp, #0x90			@ pass key schedule
+#else
+	add		r4, $key, #248			@ pass key schedule
+#endif
+	veor		@XMM[3], @XMM[3], @XMM[11]
+	mov		r5, $rounds			@ pass rounds
+	mov		r0, sp
+
+	bl		_bsaes_decrypt8
+
+	vld1.64		{@XMM[ 8]-@XMM[ 9]}, [r0,:128]!
+	vld1.64		{@XMM[10]-@XMM[11]}, [r0,:128]!
+	veor		@XMM[0], @XMM[0], @XMM[ 8]
+	veor		@XMM[1], @XMM[1], @XMM[ 9]
+	veor		@XMM[8], @XMM[6], @XMM[10]
+	vst1.8		{@XMM[0]-@XMM[1]}, [$out]!
+	veor		@XMM[9], @XMM[4], @XMM[11]
+	vst1.8		{@XMM[8]-@XMM[9]}, [$out]!
+
+	vld1.64		{@XMM[8]}, [r0,:128]		@ next round tweak
+	b		.Lxts_dec_done
+.align	4
+.Lxts_dec_3:
+	vst1.64		{@XMM[11]}, [r0,:128]		@ next round tweak
+
+	veor		@XMM[1], @XMM[1], @XMM[9]
+#ifndef	BSAES_ASM_EXTENDED_KEY
+	add		r4, sp, #0x90			@ pass key schedule
+#else
+	add		r4, $key, #248			@ pass key schedule
+#endif
+	veor		@XMM[2], @XMM[2], @XMM[10]
+	mov		r5, $rounds			@ pass rounds
+	mov		r0, sp
+
+	bl		_bsaes_decrypt8
+
+	vld1.64		{@XMM[8]-@XMM[9]}, [r0,:128]!
+	vld1.64		{@XMM[10]}, [r0,:128]!
+	veor		@XMM[0], @XMM[0], @XMM[ 8]
+	veor		@XMM[1], @XMM[1], @XMM[ 9]
+	veor		@XMM[8], @XMM[6], @XMM[10]
+	vst1.8		{@XMM[0]-@XMM[1]}, [$out]!
+	vst1.8		{@XMM[8]}, [$out]!
+
+	vld1.64		{@XMM[8]}, [r0,:128]		@ next round tweak
+	b		.Lxts_dec_done
+.align	4
+.Lxts_dec_2:
+	vst1.64		{@XMM[10]}, [r0,:128]		@ next round tweak
+
+	veor		@XMM[0], @XMM[0], @XMM[8]
+#ifndef	BSAES_ASM_EXTENDED_KEY
+	add		r4, sp, #0x90			@ pass key schedule
+#else
+	add		r4, $key, #248			@ pass key schedule
+#endif
+	veor		@XMM[1], @XMM[1], @XMM[9]
+	mov		r5, $rounds			@ pass rounds
+	mov		r0, sp
+
+	bl		_bsaes_decrypt8
+
+	vld1.64		{@XMM[8]-@XMM[9]}, [r0,:128]!
+	veor		@XMM[0], @XMM[0], @XMM[ 8]
+	veor		@XMM[1], @XMM[1], @XMM[ 9]
+	vst1.8		{@XMM[0]-@XMM[1]}, [$out]!
+
+	vld1.64		{@XMM[8]}, [r0,:128]		@ next round tweak
+	b		.Lxts_dec_done
+.align	4
+.Lxts_dec_1:
+	mov		r0, sp
+	veor		@XMM[0], @XMM[8]
+	mov		r1, sp
+	vst1.8		{@XMM[0]}, [sp,:128]
+	mov		r2, $key
+	mov		r4, $fp				@ preserve fp
+	mov		r5, $magic			@ preserve magic
+
+	bl		AES_decrypt
+
+	vld1.8		{@XMM[0]}, [sp,:128]
+	veor		@XMM[0], @XMM[0], @XMM[8]
+	vst1.8		{@XMM[0]}, [$out]!
+	mov		$fp, r4
+	mov		$magic, r5
+
+	vmov		@XMM[8], @XMM[9]		@ next round tweak
+
+.Lxts_dec_done:
+#ifndef	XTS_CHAIN_TWEAK
+	adds		$len, #0x10
+	beq		.Lxts_dec_ret
+
+	@ calculate one round of extra tweak for the stolen ciphertext
+	vldmia		$magic, {$twmask}
+	vshr.s64	@XMM[6], @XMM[8], #63
+	vand		@XMM[6], @XMM[6], $twmask
+	vadd.u64	@XMM[9], @XMM[8], @XMM[8]
+	vswp		`&Dhi("@XMM[6]")`,`&Dlo("@XMM[6]")`
+	veor		@XMM[9], @XMM[9], @XMM[6]
+
+	@ perform the final decryption with the last tweak value
+	vld1.8		{@XMM[0]}, [$inp]!
+	mov		r0, sp
+	veor		@XMM[0], @XMM[0], @XMM[9]
+	mov		r1, sp
+	vst1.8		{@XMM[0]}, [sp,:128]
+	mov		r2, $key
+	mov		r4, $fp			@ preserve fp
+
+	bl		AES_decrypt
+
+	vld1.8		{@XMM[0]}, [sp,:128]
+	veor		@XMM[0], @XMM[0], @XMM[9]
+	vst1.8		{@XMM[0]}, [$out]
+
+	mov		r6, $out
+.Lxts_dec_steal:
+	ldrb		r1, [$out]
+	ldrb		r0, [$inp], #1
+	strb		r1, [$out, #0x10]
+	strb		r0, [$out], #1
+
+	subs		$len, #1
+	bhi		.Lxts_dec_steal
+
+	vld1.8		{@XMM[0]}, [r6]
+	mov		r0, sp
+	veor		@XMM[0], @XMM[8]
+	mov		r1, sp
+	vst1.8		{@XMM[0]}, [sp,:128]
+	mov		r2, $key
+
+	bl		AES_decrypt
+
+	vld1.8		{@XMM[0]}, [sp,:128]
+	veor		@XMM[0], @XMM[0], @XMM[8]
+	vst1.8		{@XMM[0]}, [r6]
+	mov		$fp, r4
+#endif
+
+.Lxts_dec_ret:
+	bic		r0, $fp, #0xf
+	vmov.i32	q0, #0
+	vmov.i32	q1, #0
+#ifdef	XTS_CHAIN_TWEAK
+	ldr		r1, [$fp, #0x20+VFP_ABI_FRAME]	@ chain tweak
+#endif
+.Lxts_dec_bzero:				@ wipe key schedule [if any]
+	vstmia		sp!, {q0-q1}
+	cmp		sp, r0
+	bne		.Lxts_dec_bzero
+
+	mov		sp, $fp
+#ifdef	XTS_CHAIN_TWEAK
+	vst1.8		{@XMM[8]}, [r1]
+#endif
+	VFP_ABI_POP
+	ldmia		sp!, {r4-r10, pc}	@ return
+
+.size	bsaes_xts_decrypt,.-bsaes_xts_decrypt
+___
+}
+$code.=<<___;
+#endif
+___
+
+$code =~ s/\`([^\`]*)\`/eval($1)/gem;
+
+open SELF,$0;
+while(<SELF>) {
+	next if (/^#!/);
+        last if (!s/^#/@/ and !/^$/);
+        print;
+}
+close SELF;
+
+print $code;
+
+close STDOUT;
diff --git a/arch/arm/include/asm/Kbuild b/arch/arm/include/asm/Kbuild
index 1a7024b..c38b58c 100644
--- a/arch/arm/include/asm/Kbuild
+++ b/arch/arm/include/asm/Kbuild
@@ -24,6 +24,7 @@ generic-y += sembuf.h
 generic-y += serial.h
 generic-y += shmbuf.h
 generic-y += siginfo.h
+generic-y += simd.h
 generic-y += sizes.h
 generic-y += socket.h
 generic-y += sockios.h
diff --git a/arch/arm/include/asm/assembler.h b/arch/arm/include/asm/assembler.h
index fcc1b5b..5c22851 100644
--- a/arch/arm/include/asm/assembler.h
+++ b/arch/arm/include/asm/assembler.h
@@ -53,6 +53,13 @@
 #define put_byte_3      lsl #0
 #endif
 
+/* Select code for any configuration running in BE8 mode */
+#ifdef CONFIG_CPU_ENDIAN_BE8
+#define ARM_BE8(code...) code
+#else
+#define ARM_BE8(code...)
+#endif
+
 /*
  * Data preload for architectures that support it
  */
diff --git a/arch/arm/include/asm/atomic.h b/arch/arm/include/asm/atomic.h
index da1c77d..62d2cb5 100644
--- a/arch/arm/include/asm/atomic.h
+++ b/arch/arm/include/asm/atomic.h
@@ -12,6 +12,7 @@
 #define __ASM_ARM_ATOMIC_H
 
 #include <linux/compiler.h>
+#include <linux/prefetch.h>
 #include <linux/types.h>
 #include <linux/irqflags.h>
 #include <asm/barrier.h>
@@ -41,6 +42,7 @@ static inline void atomic_add(int i, atomic_t *v)
 	unsigned long tmp;
 	int result;
 
+	prefetchw(&v->counter);
 	__asm__ __volatile__("@ atomic_add\n"
 "1:	ldrex	%0, [%3]\n"
 "	add	%0, %0, %4\n"
@@ -79,6 +81,7 @@ static inline void atomic_sub(int i, atomic_t *v)
 	unsigned long tmp;
 	int result;
 
+	prefetchw(&v->counter);
 	__asm__ __volatile__("@ atomic_sub\n"
 "1:	ldrex	%0, [%3]\n"
 "	sub	%0, %0, %4\n"
@@ -114,7 +117,8 @@ static inline int atomic_sub_return(int i, atomic_t *v)
 
 static inline int atomic_cmpxchg(atomic_t *ptr, int old, int new)
 {
-	unsigned long oldval, res;
+	int oldval;
+	unsigned long res;
 
 	smp_mb();
 
@@ -134,21 +138,6 @@ static inline int atomic_cmpxchg(atomic_t *ptr, int old, int new)
 	return oldval;
 }
 
-static inline void atomic_clear_mask(unsigned long mask, unsigned long *addr)
-{
-	unsigned long tmp, tmp2;
-
-	__asm__ __volatile__("@ atomic_clear_mask\n"
-"1:	ldrex	%0, [%3]\n"
-"	bic	%0, %0, %4\n"
-"	strex	%1, %0, [%3]\n"
-"	teq	%1, #0\n"
-"	bne	1b"
-	: "=&r" (tmp), "=&r" (tmp2), "+Qo" (*addr)
-	: "r" (addr), "Ir" (mask)
-	: "cc");
-}
-
 #else /* ARM_ARCH_6 */
 
 #ifdef CONFIG_SMP
@@ -197,15 +186,6 @@ static inline int atomic_cmpxchg(atomic_t *v, int old, int new)
 	return ret;
 }
 
-static inline void atomic_clear_mask(unsigned long mask, unsigned long *addr)
-{
-	unsigned long flags;
-
-	raw_local_irq_save(flags);
-	*addr &= ~mask;
-	raw_local_irq_restore(flags);
-}
-
 #endif /* __LINUX_ARM_ARCH__ */
 
 #define atomic_xchg(v, new) (xchg(&((v)->counter), new))
@@ -238,15 +218,15 @@ static inline int __atomic_add_unless(atomic_t *v, int a, int u)
 
 #ifndef CONFIG_GENERIC_ATOMIC64
 typedef struct {
-	u64 __aligned(8) counter;
+	long long counter;
 } atomic64_t;
 
 #define ATOMIC64_INIT(i) { (i) }
 
 #ifdef CONFIG_ARM_LPAE
-static inline u64 atomic64_read(const atomic64_t *v)
+static inline long long atomic64_read(const atomic64_t *v)
 {
-	u64 result;
+	long long result;
 
 	__asm__ __volatile__("@ atomic64_read\n"
 "	ldrd	%0, %H0, [%1]"
@@ -257,7 +237,7 @@ static inline u64 atomic64_read(const atomic64_t *v)
 	return result;
 }
 
-static inline void atomic64_set(atomic64_t *v, u64 i)
+static inline void atomic64_set(atomic64_t *v, long long i)
 {
 	__asm__ __volatile__("@ atomic64_set\n"
 "	strd	%2, %H2, [%1]"
@@ -266,9 +246,9 @@ static inline void atomic64_set(atomic64_t *v, u64 i)
 	);
 }
 #else
-static inline u64 atomic64_read(const atomic64_t *v)
+static inline long long atomic64_read(const atomic64_t *v)
 {
-	u64 result;
+	long long result;
 
 	__asm__ __volatile__("@ atomic64_read\n"
 "	ldrexd	%0, %H0, [%1]"
@@ -279,10 +259,11 @@ static inline u64 atomic64_read(const atomic64_t *v)
 	return result;
 }
 
-static inline void atomic64_set(atomic64_t *v, u64 i)
+static inline void atomic64_set(atomic64_t *v, long long i)
 {
-	u64 tmp;
+	long long tmp;
 
+	prefetchw(&v->counter);
 	__asm__ __volatile__("@ atomic64_set\n"
 "1:	ldrexd	%0, %H0, [%2]\n"
 "	strexd	%0, %3, %H3, [%2]\n"
@@ -294,15 +275,16 @@ static inline void atomic64_set(atomic64_t *v, u64 i)
 }
 #endif
 
-static inline void atomic64_add(u64 i, atomic64_t *v)
+static inline void atomic64_add(long long i, atomic64_t *v)
 {
-	u64 result;
+	long long result;
 	unsigned long tmp;
 
+	prefetchw(&v->counter);
 	__asm__ __volatile__("@ atomic64_add\n"
 "1:	ldrexd	%0, %H0, [%3]\n"
-"	adds	%0, %0, %4\n"
-"	adc	%H0, %H0, %H4\n"
+"	adds	%Q0, %Q0, %Q4\n"
+"	adc	%R0, %R0, %R4\n"
 "	strexd	%1, %0, %H0, [%3]\n"
 "	teq	%1, #0\n"
 "	bne	1b"
@@ -311,17 +293,17 @@ static inline void atomic64_add(u64 i, atomic64_t *v)
 	: "cc");
 }
 
-static inline u64 atomic64_add_return(u64 i, atomic64_t *v)
+static inline long long atomic64_add_return(long long i, atomic64_t *v)
 {
-	u64 result;
+	long long result;
 	unsigned long tmp;
 
 	smp_mb();
 
 	__asm__ __volatile__("@ atomic64_add_return\n"
 "1:	ldrexd	%0, %H0, [%3]\n"
-"	adds	%0, %0, %4\n"
-"	adc	%H0, %H0, %H4\n"
+"	adds	%Q0, %Q0, %Q4\n"
+"	adc	%R0, %R0, %R4\n"
 "	strexd	%1, %0, %H0, [%3]\n"
 "	teq	%1, #0\n"
 "	bne	1b"
@@ -334,15 +316,16 @@ static inline u64 atomic64_add_return(u64 i, atomic64_t *v)
 	return result;
 }
 
-static inline void atomic64_sub(u64 i, atomic64_t *v)
+static inline void atomic64_sub(long long i, atomic64_t *v)
 {
-	u64 result;
+	long long result;
 	unsigned long tmp;
 
+	prefetchw(&v->counter);
 	__asm__ __volatile__("@ atomic64_sub\n"
 "1:	ldrexd	%0, %H0, [%3]\n"
-"	subs	%0, %0, %4\n"
-"	sbc	%H0, %H0, %H4\n"
+"	subs	%Q0, %Q0, %Q4\n"
+"	sbc	%R0, %R0, %R4\n"
 "	strexd	%1, %0, %H0, [%3]\n"
 "	teq	%1, #0\n"
 "	bne	1b"
@@ -351,17 +334,17 @@ static inline void atomic64_sub(u64 i, atomic64_t *v)
 	: "cc");
 }
 
-static inline u64 atomic64_sub_return(u64 i, atomic64_t *v)
+static inline long long atomic64_sub_return(long long i, atomic64_t *v)
 {
-	u64 result;
+	long long result;
 	unsigned long tmp;
 
 	smp_mb();
 
 	__asm__ __volatile__("@ atomic64_sub_return\n"
 "1:	ldrexd	%0, %H0, [%3]\n"
-"	subs	%0, %0, %4\n"
-"	sbc	%H0, %H0, %H4\n"
+"	subs	%Q0, %Q0, %Q4\n"
+"	sbc	%R0, %R0, %R4\n"
 "	strexd	%1, %0, %H0, [%3]\n"
 "	teq	%1, #0\n"
 "	bne	1b"
@@ -374,9 +357,10 @@ static inline u64 atomic64_sub_return(u64 i, atomic64_t *v)
 	return result;
 }
 
-static inline u64 atomic64_cmpxchg(atomic64_t *ptr, u64 old, u64 new)
+static inline long long atomic64_cmpxchg(atomic64_t *ptr, long long old,
+					long long new)
 {
-	u64 oldval;
+	long long oldval;
 	unsigned long res;
 
 	smp_mb();
@@ -398,9 +382,9 @@ static inline u64 atomic64_cmpxchg(atomic64_t *ptr, u64 old, u64 new)
 	return oldval;
 }
 
-static inline u64 atomic64_xchg(atomic64_t *ptr, u64 new)
+static inline long long atomic64_xchg(atomic64_t *ptr, long long new)
 {
-	u64 result;
+	long long result;
 	unsigned long tmp;
 
 	smp_mb();
@@ -419,18 +403,18 @@ static inline u64 atomic64_xchg(atomic64_t *ptr, u64 new)
 	return result;
 }
 
-static inline u64 atomic64_dec_if_positive(atomic64_t *v)
+static inline long long atomic64_dec_if_positive(atomic64_t *v)
 {
-	u64 result;
+	long long result;
 	unsigned long tmp;
 
 	smp_mb();
 
 	__asm__ __volatile__("@ atomic64_dec_if_positive\n"
 "1:	ldrexd	%0, %H0, [%3]\n"
-"	subs	%0, %0, #1\n"
-"	sbc	%H0, %H0, #0\n"
-"	teq	%H0, #0\n"
+"	subs	%Q0, %Q0, #1\n"
+"	sbc	%R0, %R0, #0\n"
+"	teq	%R0, #0\n"
 "	bmi	2f\n"
 "	strexd	%1, %0, %H0, [%3]\n"
 "	teq	%1, #0\n"
@@ -445,9 +429,9 @@ static inline u64 atomic64_dec_if_positive(atomic64_t *v)
 	return result;
 }
 
-static inline int atomic64_add_unless(atomic64_t *v, u64 a, u64 u)
+static inline int atomic64_add_unless(atomic64_t *v, long long a, long long u)
 {
-	u64 val;
+	long long val;
 	unsigned long tmp;
 	int ret = 1;
 
@@ -459,8 +443,8 @@ static inline int atomic64_add_unless(atomic64_t *v, u64 a, u64 u)
 "	teqeq	%H0, %H5\n"
 "	moveq	%1, #0\n"
 "	beq	2f\n"
-"	adds	%0, %0, %6\n"
-"	adc	%H0, %H0, %H6\n"
+"	adds	%Q0, %Q0, %Q6\n"
+"	adc	%R0, %R0, %R6\n"
 "	strexd	%2, %0, %H0, [%4]\n"
 "	teq	%2, #0\n"
 "	bne	1b\n"
diff --git a/arch/arm/include/asm/bL_switcher.h b/arch/arm/include/asm/bL_switcher.h
new file mode 100644
index 0000000..1714800
--- /dev/null
+++ b/arch/arm/include/asm/bL_switcher.h
@@ -0,0 +1,77 @@
+/*
+ * arch/arm/include/asm/bL_switcher.h
+ *
+ * Created by:  Nicolas Pitre, April 2012
+ * Copyright:   (C) 2012-2013  Linaro Limited
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef ASM_BL_SWITCHER_H
+#define ASM_BL_SWITCHER_H
+
+#include <linux/compiler.h>
+#include <linux/types.h>
+
+typedef void (*bL_switch_completion_handler)(void *cookie);
+
+int bL_switch_request_cb(unsigned int cpu, unsigned int new_cluster_id,
+			 bL_switch_completion_handler completer,
+			 void *completer_cookie);
+static inline int bL_switch_request(unsigned int cpu, unsigned int new_cluster_id)
+{
+	return bL_switch_request_cb(cpu, new_cluster_id, NULL, NULL);
+}
+
+/*
+ * Register here to be notified about runtime enabling/disabling of
+ * the switcher.
+ *
+ * The notifier chain is called with the switcher activation lock held:
+ * the switcher will not be enabled or disabled during callbacks.
+ * Callbacks must not call bL_switcher_{get,put}_enabled().
+ */
+#define BL_NOTIFY_PRE_ENABLE	0
+#define BL_NOTIFY_POST_ENABLE	1
+#define BL_NOTIFY_PRE_DISABLE	2
+#define BL_NOTIFY_POST_DISABLE	3
+
+#ifdef CONFIG_BL_SWITCHER
+
+int bL_switcher_register_notifier(struct notifier_block *nb);
+int bL_switcher_unregister_notifier(struct notifier_block *nb);
+
+/*
+ * Use these functions to temporarily prevent enabling/disabling of
+ * the switcher.
+ * bL_switcher_get_enabled() returns true if the switcher is currently
+ * enabled.  Each call to bL_switcher_get_enabled() must be followed
+ * by a call to bL_switcher_put_enabled().  These functions are not
+ * recursive.
+ */
+bool bL_switcher_get_enabled(void);
+void bL_switcher_put_enabled(void);
+
+int bL_switcher_trace_trigger(void);
+int bL_switcher_get_logical_index(u32 mpidr);
+
+#else
+static inline int bL_switcher_register_notifier(struct notifier_block *nb)
+{
+	return 0;
+}
+
+static inline int bL_switcher_unregister_notifier(struct notifier_block *nb)
+{
+	return 0;
+}
+
+static inline bool bL_switcher_get_enabled(void) { return false; }
+static inline void bL_switcher_put_enabled(void) { }
+static inline int bL_switcher_trace_trigger(void) { return 0; }
+static inline int bL_switcher_get_logical_index(u32 mpidr) { return -EUNATCH; }
+#endif /* CONFIG_BL_SWITCHER */
+
+#endif
diff --git a/arch/arm/include/asm/bug.h b/arch/arm/include/asm/bug.h
index 7af5c6c..b274bde 100644
--- a/arch/arm/include/asm/bug.h
+++ b/arch/arm/include/asm/bug.h
@@ -2,6 +2,8 @@
 #define _ASMARM_BUG_H
 
 #include <linux/linkage.h>
+#include <linux/types.h>
+#include <asm/opcodes.h>
 
 #ifdef CONFIG_BUG
 
@@ -12,10 +14,10 @@
  */
 #ifdef CONFIG_THUMB2_KERNEL
 #define BUG_INSTR_VALUE 0xde02
-#define BUG_INSTR_TYPE ".hword "
+#define BUG_INSTR(__value) __inst_thumb16(__value)
 #else
 #define BUG_INSTR_VALUE 0xe7f001f2
-#define BUG_INSTR_TYPE ".word "
+#define BUG_INSTR(__value) __inst_arm(__value)
 #endif
 
 
@@ -33,7 +35,7 @@
 
 #define __BUG(__file, __line, __value)				\
 do {								\
-	asm volatile("1:\t" BUG_INSTR_TYPE #__value "\n"	\
+	asm volatile("1:\t" BUG_INSTR(__value) "\n"  \
 		".pushsection .rodata.str, \"aMS\", %progbits, 1\n" \
 		"2:\t.asciz " #__file "\n" 			\
 		".popsection\n" 				\
@@ -48,7 +50,7 @@ do {								\
 
 #define __BUG(__file, __line, __value)				\
 do {								\
-	asm volatile(BUG_INSTR_TYPE #__value);			\
+	asm volatile(BUG_INSTR(__value) "\n");			\
 	unreachable();						\
 } while (0)
 #endif  /* CONFIG_DEBUG_BUGVERBOSE */
diff --git a/arch/arm/include/asm/cacheflush.h b/arch/arm/include/asm/cacheflush.h
index 15f2d5b..ee753f1 100644
--- a/arch/arm/include/asm/cacheflush.h
+++ b/arch/arm/include/asm/cacheflush.h
@@ -435,4 +435,50 @@ static inline void __sync_cache_range_r(volatile void *p, size_t size)
 #define sync_cache_w(ptr) __sync_cache_range_w(ptr, sizeof *(ptr))
 #define sync_cache_r(ptr) __sync_cache_range_r(ptr, sizeof *(ptr))
 
+/*
+ * Disabling cache access for one CPU in an ARMv7 SMP system is tricky.
+ * To do so we must:
+ *
+ * - Clear the SCTLR.C bit to prevent further cache allocations
+ * - Flush the desired level of cache
+ * - Clear the ACTLR "SMP" bit to disable local coherency
+ *
+ * ... and so without any intervening memory access in between those steps,
+ * not even to the stack.
+ *
+ * WARNING -- After this has been called:
+ *
+ * - No ldrex/strex (and similar) instructions must be used.
+ * - The CPU is obviously no longer coherent with the other CPUs.
+ * - This is unlikely to work as expected if Linux is running non-secure.
+ *
+ * Note:
+ *
+ * - This is known to apply to several ARMv7 processor implementations,
+ *   however some exceptions may exist.  Caveat emptor.
+ *
+ * - The clobber list is dictated by the call to v7_flush_dcache_*.
+ *   fp is preserved to the stack explicitly prior disabling the cache
+ *   since adding it to the clobber list is incompatible with having
+ *   CONFIG_FRAME_POINTER=y.  ip is saved as well if ever r12-clobbering
+ *   trampoline are inserted by the linker and to keep sp 64-bit aligned.
+ */
+#define v7_exit_coherency_flush(level) \
+	asm volatile( \
+	"stmfd	sp!, {fp, ip} \n\t" \
+	"mrc	p15, 0, r0, c1, c0, 0	@ get SCTLR \n\t" \
+	"bic	r0, r0, #"__stringify(CR_C)" \n\t" \
+	"mcr	p15, 0, r0, c1, c0, 0	@ set SCTLR \n\t" \
+	"isb	\n\t" \
+	"bl	v7_flush_dcache_"__stringify(level)" \n\t" \
+	"clrex	\n\t" \
+	"mrc	p15, 0, r0, c1, c0, 1	@ get ACTLR \n\t" \
+	"bic	r0, r0, #(1 << 6)	@ disable local coherency \n\t" \
+	"mcr	p15, 0, r0, c1, c0, 1	@ set ACTLR \n\t" \
+	"isb	\n\t" \
+	"dsb	\n\t" \
+	"ldmfd	sp!, {fp, ip}" \
+	: : : "r0","r1","r2","r3","r4","r5","r6","r7", \
+	      "r9","r10","lr","memory" )
+
 #endif
diff --git a/arch/arm/include/asm/cmpxchg.h b/arch/arm/include/asm/cmpxchg.h
index 4f009c1..df2fbba 100644
--- a/arch/arm/include/asm/cmpxchg.h
+++ b/arch/arm/include/asm/cmpxchg.h
@@ -223,6 +223,42 @@ static inline unsigned long __cmpxchg_local(volatile void *ptr,
 	return ret;
 }
 
+static inline unsigned long long __cmpxchg64(unsigned long long *ptr,
+					     unsigned long long old,
+					     unsigned long long new)
+{
+	unsigned long long oldval;
+	unsigned long res;
+
+	__asm__ __volatile__(
+"1:	ldrexd		%1, %H1, [%3]\n"
+"	teq		%1, %4\n"
+"	teqeq		%H1, %H4\n"
+"	bne		2f\n"
+"	strexd		%0, %5, %H5, [%3]\n"
+"	teq		%0, #0\n"
+"	bne		1b\n"
+"2:"
+	: "=&r" (res), "=&r" (oldval), "+Qo" (*ptr)
+	: "r" (ptr), "r" (old), "r" (new)
+	: "cc");
+
+	return oldval;
+}
+
+static inline unsigned long long __cmpxchg64_mb(unsigned long long *ptr,
+						unsigned long long old,
+						unsigned long long new)
+{
+	unsigned long long ret;
+
+	smp_mb();
+	ret = __cmpxchg64(ptr, old, new);
+	smp_mb();
+
+	return ret;
+}
+
 #define cmpxchg_local(ptr,o,n)						\
 	((__typeof__(*(ptr)))__cmpxchg_local((ptr),			\
 				       (unsigned long)(o),		\
@@ -230,18 +266,16 @@ static inline unsigned long __cmpxchg_local(volatile void *ptr,
 				       sizeof(*(ptr))))
 
 #define cmpxchg64(ptr, o, n)						\
-	((__typeof__(*(ptr)))atomic64_cmpxchg(container_of((ptr),	\
-						atomic64_t,		\
-						counter),		\
-					      (unsigned long long)(o),	\
-					      (unsigned long long)(n)))
-
-#define cmpxchg64_local(ptr, o, n)					\
-	((__typeof__(*(ptr)))local64_cmpxchg(container_of((ptr),	\
-						local64_t,		\
-						a),			\
-					     (unsigned long long)(o),	\
-					     (unsigned long long)(n)))
+	((__typeof__(*(ptr)))__cmpxchg64_mb((ptr),			\
+					(unsigned long long)(o),	\
+					(unsigned long long)(n)))
+
+#define cmpxchg64_relaxed(ptr, o, n)					\
+	((__typeof__(*(ptr)))__cmpxchg64((ptr),				\
+					(unsigned long long)(o),	\
+					(unsigned long long)(n)))
+
+#define cmpxchg64_local(ptr, o, n)	cmpxchg64_relaxed((ptr), (o), (n))
 
 #endif	/* __LINUX_ARM_ARCH__ >= 6 */
 
diff --git a/arch/arm/include/asm/cputype.h b/arch/arm/include/asm/cputype.h
index 9672e97..acdde76 100644
--- a/arch/arm/include/asm/cputype.h
+++ b/arch/arm/include/asm/cputype.h
@@ -10,6 +10,7 @@
 #define CPUID_TLBTYPE	3
 #define CPUID_MPUIR	4
 #define CPUID_MPIDR	5
+#define CPUID_REVIDR	6
 
 #ifdef CONFIG_CPU_V7M
 #define CPUID_EXT_PFR0	0x40
diff --git a/arch/arm/include/asm/hardirq.h b/arch/arm/include/asm/hardirq.h
index 2740c2a..fe3ea77 100644
--- a/arch/arm/include/asm/hardirq.h
+++ b/arch/arm/include/asm/hardirq.h
@@ -5,7 +5,7 @@
 #include <linux/threads.h>
 #include <asm/irq.h>
 
-#define NR_IPI	6
+#define NR_IPI	8
 
 typedef struct {
 	unsigned int __softirq_pending;
diff --git a/arch/arm/include/asm/hardware/coresight.h b/arch/arm/include/asm/hardware/coresight.h
index 0cf7a6b..ad774f3 100644
--- a/arch/arm/include/asm/hardware/coresight.h
+++ b/arch/arm/include/asm/hardware/coresight.h
@@ -24,8 +24,8 @@
 #define TRACER_TIMEOUT 10000
 
 #define etm_writel(t, v, x) \
-	(__raw_writel((v), (t)->etm_regs + (x)))
-#define etm_readl(t, x) (__raw_readl((t)->etm_regs + (x)))
+	(writel_relaxed((v), (t)->etm_regs + (x)))
+#define etm_readl(t, x) (readl_relaxed((t)->etm_regs + (x)))
 
 /* CoreSight Management Registers */
 #define CSMR_LOCKACCESS 0xfb0
@@ -142,8 +142,8 @@
 #define ETBFF_TRIGFL		BIT(10)
 
 #define etb_writel(t, v, x) \
-	(__raw_writel((v), (t)->etb_regs + (x)))
-#define etb_readl(t, x) (__raw_readl((t)->etb_regs + (x)))
+	(writel_relaxed((v), (t)->etb_regs + (x)))
+#define etb_readl(t, x) (readl_relaxed((t)->etb_regs + (x)))
 
 #define etm_lock(t) do { etm_writel((t), 0, CSMR_LOCKACCESS); } while (0)
 #define etm_unlock(t) \
diff --git a/arch/arm/include/asm/kgdb.h b/arch/arm/include/asm/kgdb.h
index 48066ce..0a9d5dd 100644
--- a/arch/arm/include/asm/kgdb.h
+++ b/arch/arm/include/asm/kgdb.h
@@ -11,6 +11,7 @@
 #define __ARM_KGDB_H__
 
 #include <linux/ptrace.h>
+#include <asm/opcodes.h>
 
 /*
  * GDB assumes that we're a user process being debugged, so
@@ -41,7 +42,7 @@
 
 static inline void arch_kgdb_breakpoint(void)
 {
-	asm(".word 0xe7ffdeff");
+	asm(__inst_arm(0xe7ffdeff));
 }
 
 extern void kgdb_handle_bus_error(void);
diff --git a/arch/arm/include/asm/mach/arch.h b/arch/arm/include/asm/mach/arch.h
index 402a2bc..17a3fa2 100644
--- a/arch/arm/include/asm/mach/arch.h
+++ b/arch/arm/include/asm/mach/arch.h
@@ -49,6 +49,7 @@ struct machine_desc {
 	bool			(*smp_init)(void);
 	void			(*fixup)(struct tag *, char **,
 					 struct meminfo *);
+	void			(*init_meminfo)(void);
 	void			(*reserve)(void);/* reserve mem blocks	*/
 	void			(*map_io)(void);/* IO mapping function	*/
 	void			(*init_early)(void);
diff --git a/arch/arm/include/asm/mcpm.h b/arch/arm/include/asm/mcpm.h
index fc82a88..608516e 100644
--- a/arch/arm/include/asm/mcpm.h
+++ b/arch/arm/include/asm/mcpm.h
@@ -42,6 +42,14 @@ extern void mcpm_entry_point(void);
 void mcpm_set_entry_vector(unsigned cpu, unsigned cluster, void *ptr);
 
 /*
+ * This sets an early poke i.e a value to be poked into some address
+ * from very early assembly code before the CPU is ungated.  The
+ * address must be physical, and if 0 then nothing will happen.
+ */
+void mcpm_set_early_poke(unsigned cpu, unsigned cluster,
+			 unsigned long poke_phys_addr, unsigned long poke_val);
+
+/*
  * CPU/cluster power operations API for higher subsystems to use.
  */
 
@@ -81,10 +89,40 @@ int mcpm_cpu_power_up(unsigned int cpu, unsigned int cluster);
  *
  * This will return if mcpm_platform_register() has not been called
  * previously in which case the caller should take appropriate action.
+ *
+ * On success, the CPU is not guaranteed to be truly halted until
+ * mcpm_cpu_power_down_finish() subsequently returns non-zero for the
+ * specified cpu.  Until then, other CPUs should make sure they do not
+ * trash memory the target CPU might be executing/accessing.
  */
 void mcpm_cpu_power_down(void);
 
 /**
+ * mcpm_cpu_power_down_finish - wait for a specified CPU to halt, and
+ *	make sure it is powered off
+ *
+ * @cpu: CPU number within given cluster
+ * @cluster: cluster number for the CPU
+ *
+ * Call this function to ensure that a pending powerdown has taken
+ * effect and the CPU is safely parked before performing non-mcpm
+ * operations that may affect the CPU (such as kexec trashing the
+ * kernel text).
+ *
+ * It is *not* necessary to call this function if you only need to
+ * serialise a pending powerdown with mcpm_cpu_power_up() or a wakeup
+ * event.
+ *
+ * Do not call this function unless the specified CPU has already
+ * called mcpm_cpu_power_down() or has committed to doing so.
+ *
+ * @return:
+ *	- zero if the CPU is in a safely parked state
+ *	- nonzero otherwise (e.g., timeout)
+ */
+int mcpm_cpu_power_down_finish(unsigned int cpu, unsigned int cluster);
+
+/**
  * mcpm_cpu_suspend - bring the calling CPU in a suspended state
  *
  * @expected_residency: duration in microseconds the CPU is expected
@@ -126,6 +164,7 @@ int mcpm_cpu_powered_up(void);
 struct mcpm_platform_ops {
 	int (*power_up)(unsigned int cpu, unsigned int cluster);
 	void (*power_down)(void);
+	int (*power_down_finish)(unsigned int cpu, unsigned int cluster);
 	void (*suspend)(u64);
 	void (*powered_up)(void);
 };
diff --git a/arch/arm/include/asm/memory.h b/arch/arm/include/asm/memory.h
index e750a93..4dd2145 100644
--- a/arch/arm/include/asm/memory.h
+++ b/arch/arm/include/asm/memory.h
@@ -172,8 +172,13 @@
  * so that all we need to do is modify the 8-bit constant field.
  */
 #define __PV_BITS_31_24	0x81000000
+#define __PV_BITS_7_0	0x81
+
+extern u64 __pv_phys_offset;
+extern u64 __pv_offset;
+extern void fixup_pv_table(const void *, unsigned long);
+extern const void *__pv_table_begin, *__pv_table_end;
 
-extern unsigned long __pv_phys_offset;
 #define PHYS_OFFSET __pv_phys_offset
 
 #define __pv_stub(from,to,instr,type)			\
@@ -185,22 +190,58 @@ extern unsigned long __pv_phys_offset;
 	: "=r" (to)					\
 	: "r" (from), "I" (type))
 
-static inline unsigned long __virt_to_phys(unsigned long x)
+#define __pv_stub_mov_hi(t)				\
+	__asm__ volatile("@ __pv_stub_mov\n"		\
+	"1:	mov	%R0, %1\n"			\
+	"	.pushsection .pv_table,\"a\"\n"		\
+	"	.long	1b\n"				\
+	"	.popsection\n"				\
+	: "=r" (t)					\
+	: "I" (__PV_BITS_7_0))
+
+#define __pv_add_carry_stub(x, y)			\
+	__asm__ volatile("@ __pv_add_carry_stub\n"	\
+	"1:	adds	%Q0, %1, %2\n"			\
+	"	adc	%R0, %R0, #0\n"			\
+	"	.pushsection .pv_table,\"a\"\n"		\
+	"	.long	1b\n"				\
+	"	.popsection\n"				\
+	: "+r" (y)					\
+	: "r" (x), "I" (__PV_BITS_31_24)		\
+	: "cc")
+
+static inline phys_addr_t __virt_to_phys(unsigned long x)
 {
-	unsigned long t;
-	__pv_stub(x, t, "add", __PV_BITS_31_24);
+	phys_addr_t t;
+
+	if (sizeof(phys_addr_t) == 4) {
+		__pv_stub(x, t, "add", __PV_BITS_31_24);
+	} else {
+		__pv_stub_mov_hi(t);
+		__pv_add_carry_stub(x, t);
+	}
 	return t;
 }
 
-static inline unsigned long __phys_to_virt(unsigned long x)
+static inline unsigned long __phys_to_virt(phys_addr_t x)
 {
 	unsigned long t;
 	__pv_stub(x, t, "sub", __PV_BITS_31_24);
 	return t;
 }
+
 #else
-#define __virt_to_phys(x)	((x) - PAGE_OFFSET + PHYS_OFFSET)
-#define __phys_to_virt(x)	((x) - PHYS_OFFSET + PAGE_OFFSET)
+
+static inline phys_addr_t __virt_to_phys(unsigned long x)
+{
+	return (phys_addr_t)x - PAGE_OFFSET + PHYS_OFFSET;
+}
+
+static inline unsigned long __phys_to_virt(phys_addr_t x)
+{
+	return x - PHYS_OFFSET + PAGE_OFFSET;
+}
+
 #endif
 #endif
 #endif /* __ASSEMBLY__ */
@@ -238,16 +279,33 @@ static inline phys_addr_t virt_to_phys(const volatile void *x)
 
 static inline void *phys_to_virt(phys_addr_t x)
 {
-	return (void *)(__phys_to_virt((unsigned long)(x)));
+	return (void *)__phys_to_virt(x);
 }
 
 /*
  * Drivers should NOT use these either.
  */
 #define __pa(x)			__virt_to_phys((unsigned long)(x))
-#define __va(x)			((void *)__phys_to_virt((unsigned long)(x)))
+#define __va(x)			((void *)__phys_to_virt((phys_addr_t)(x)))
 #define pfn_to_kaddr(pfn)	__va((pfn) << PAGE_SHIFT)
 
+extern phys_addr_t (*arch_virt_to_idmap)(unsigned long x);
+
+/*
+ * These are for systems that have a hardware interconnect supported alias of
+ * physical memory for idmap purposes.  Most cases should leave these
+ * untouched.
+ */
+static inline phys_addr_t __virt_to_idmap(unsigned long x)
+{
+	if (arch_virt_to_idmap)
+		return arch_virt_to_idmap(x);
+	else
+		return __virt_to_phys(x);
+}
+
+#define virt_to_idmap(x)	__virt_to_idmap((unsigned long)(x))
+
 /*
  * Virtual <-> DMA view memory address translations
  * Again, these are *only* valid on the kernel direct mapped RAM
diff --git a/arch/arm/include/asm/mmu.h b/arch/arm/include/asm/mmu.h
index 6f18da0..64fd151 100644
--- a/arch/arm/include/asm/mmu.h
+++ b/arch/arm/include/asm/mmu.h
@@ -16,7 +16,7 @@ typedef struct {
 #ifdef CONFIG_CPU_HAS_ASID
 #define ASID_BITS	8
 #define ASID_MASK	((~0ULL) << ASID_BITS)
-#define ASID(mm)	((mm)->context.id.counter & ~ASID_MASK)
+#define ASID(mm)	((unsigned int)((mm)->context.id.counter & ~ASID_MASK))
 #else
 #define ASID(mm)	(0)
 #endif
diff --git a/arch/arm/include/asm/pgtable-2level.h b/arch/arm/include/asm/pgtable-2level.h
index f97ee02..86a659a 100644
--- a/arch/arm/include/asm/pgtable-2level.h
+++ b/arch/arm/include/asm/pgtable-2level.h
@@ -181,6 +181,13 @@ static inline pmd_t *pmd_offset(pud_t *pud, unsigned long addr)
 
 #define set_pte_ext(ptep,pte,ext) cpu_set_pte_ext(ptep,pte,ext)
 
+/*
+ * We don't have huge page support for short descriptors, for the moment
+ * define empty stubs for use by pin_page_for_write.
+ */
+#define pmd_hugewillfault(pmd)	(0)
+#define pmd_thp_or_huge(pmd)	(0)
+
 #endif /* __ASSEMBLY__ */
 
 #endif /* _ASM_PGTABLE_2LEVEL_H */
diff --git a/arch/arm/include/asm/pgtable-3level.h b/arch/arm/include/asm/pgtable-3level.h
index 5689c18..39c54cf 100644
--- a/arch/arm/include/asm/pgtable-3level.h
+++ b/arch/arm/include/asm/pgtable-3level.h
@@ -206,6 +206,9 @@ static inline pmd_t *pmd_offset(pud_t *pud, unsigned long addr)
 #define __HAVE_ARCH_PMD_WRITE
 #define pmd_write(pmd)		(!(pmd_val(pmd) & PMD_SECT_RDONLY))
 
+#define pmd_hugewillfault(pmd)	(!pmd_young(pmd) || !pmd_write(pmd))
+#define pmd_thp_or_huge(pmd)	(pmd_huge(pmd) || pmd_trans_huge(pmd))
+
 #ifdef CONFIG_TRANSPARENT_HUGEPAGE
 #define pmd_trans_huge(pmd)	(pmd_val(pmd) && !(pmd_val(pmd) & PMD_TABLE_BIT))
 #define pmd_trans_splitting(pmd) (pmd_val(pmd) & PMD_SECT_SPLITTING)
diff --git a/arch/arm/include/asm/processor.h b/arch/arm/include/asm/processor.h
index 413f387..c3d5fc1 100644
--- a/arch/arm/include/asm/processor.h
+++ b/arch/arm/include/asm/processor.h
@@ -22,6 +22,7 @@
 #include <asm/hw_breakpoint.h>
 #include <asm/ptrace.h>
 #include <asm/types.h>
+#include <asm/unified.h>
 
 #ifdef __KERNEL__
 #define STACK_TOP	((current->personality & ADDR_LIMIT_32BIT) ? \
@@ -87,6 +88,17 @@ unsigned long get_wchan(struct task_struct *p);
 #define KSTK_EIP(tsk)	task_pt_regs(tsk)->ARM_pc
 #define KSTK_ESP(tsk)	task_pt_regs(tsk)->ARM_sp
 
+#ifdef CONFIG_SMP
+#define __ALT_SMP_ASM(smp, up)						\
+	"9998:	" smp "\n"						\
+	"	.pushsection \".alt.smp.init\", \"a\"\n"		\
+	"	.long	9998b\n"					\
+	"	" up "\n"						\
+	"	.popsection\n"
+#else
+#define __ALT_SMP_ASM(smp, up)	up
+#endif
+
 /*
  * Prefetching support - only ARMv5.
  */
@@ -97,17 +109,22 @@ static inline void prefetch(const void *ptr)
 {
 	__asm__ __volatile__(
 		"pld\t%a0"
-		:
-		: "p" (ptr)
-		: "cc");
+		:: "p" (ptr));
 }
 
+#if __LINUX_ARM_ARCH__ >= 7 && defined(CONFIG_SMP)
 #define ARCH_HAS_PREFETCHW
-#define prefetchw(ptr)	prefetch(ptr)
-
-#define ARCH_HAS_SPINLOCK_PREFETCH
-#define spin_lock_prefetch(x) do { } while (0)
-
+static inline void prefetchw(const void *ptr)
+{
+	__asm__ __volatile__(
+		".arch_extension	mp\n"
+		__ALT_SMP_ASM(
+			WASM(pldw)		"\t%a0",
+			WASM(pld)		"\t%a0"
+		)
+		:: "p" (ptr));
+}
+#endif
 #endif
 
 #define HAVE_ARCH_PICK_MMAP_LAYOUT
diff --git a/arch/arm/include/asm/setup.h b/arch/arm/include/asm/setup.h
index c50f0560..8d6a089 100644
--- a/arch/arm/include/asm/setup.h
+++ b/arch/arm/include/asm/setup.h
@@ -49,7 +49,7 @@ extern struct meminfo meminfo;
 #define bank_phys_end(bank)	((bank)->start + (bank)->size)
 #define bank_phys_size(bank)	(bank)->size
 
-extern int arm_add_memory(phys_addr_t start, phys_addr_t size);
+extern int arm_add_memory(u64 start, u64 size);
 extern void early_print(const char *str, ...);
 extern void dump_machine_table(void);
 
diff --git a/arch/arm/include/asm/smp.h b/arch/arm/include/asm/smp.h
index a8cae71c..22a3b9b 100644
--- a/arch/arm/include/asm/smp.h
+++ b/arch/arm/include/asm/smp.h
@@ -84,6 +84,8 @@ extern void arch_send_call_function_single_ipi(int cpu);
 extern void arch_send_call_function_ipi_mask(const struct cpumask *mask);
 extern void arch_send_wakeup_ipi_mask(const struct cpumask *mask);
 
+extern int register_ipi_completion(struct completion *completion, int cpu);
+
 struct smp_operations {
 #ifdef CONFIG_SMP
 	/*
diff --git a/arch/arm/include/asm/spinlock.h b/arch/arm/include/asm/spinlock.h
index 4f2c280..ef3c607 100644
--- a/arch/arm/include/asm/spinlock.h
+++ b/arch/arm/include/asm/spinlock.h
@@ -5,21 +5,13 @@
 #error SMP not supported on pre-ARMv6 CPUs
 #endif
 
-#include <asm/processor.h>
+#include <linux/prefetch.h>
 
 /*
  * sev and wfe are ARMv6K extensions.  Uniprocessor ARMv6 may not have the K
  * extensions, so when running on UP, we have to patch these instructions away.
  */
-#define ALT_SMP(smp, up)					\
-	"9998:	" smp "\n"					\
-	"	.pushsection \".alt.smp.init\", \"a\"\n"	\
-	"	.long	9998b\n"				\
-	"	" up "\n"					\
-	"	.popsection\n"
-
 #ifdef CONFIG_THUMB2_KERNEL
-#define SEV		ALT_SMP("sev.w", "nop.w")
 /*
  * For Thumb-2, special care is needed to ensure that the conditional WFE
  * instruction really does assemble to exactly 4 bytes (as required by
@@ -31,17 +23,18 @@
  * the assembler won't change IT instructions which are explicitly present
  * in the input.
  */
-#define WFE(cond)	ALT_SMP(		\
+#define WFE(cond)	__ALT_SMP_ASM(		\
 	"it " cond "\n\t"			\
 	"wfe" cond ".n",			\
 						\
 	"nop.w"					\
 )
 #else
-#define SEV		ALT_SMP("sev", "nop")
-#define WFE(cond)	ALT_SMP("wfe" cond, "nop")
+#define WFE(cond)	__ALT_SMP_ASM("wfe" cond, "nop")
 #endif
 
+#define SEV		__ALT_SMP_ASM(WASM(sev), WASM(nop))
+
 static inline void dsb_sev(void)
 {
 #if __LINUX_ARM_ARCH__ >= 7
@@ -77,6 +70,7 @@ static inline void arch_spin_lock(arch_spinlock_t *lock)
 	u32 newval;
 	arch_spinlock_t lockval;
 
+	prefetchw(&lock->slock);
 	__asm__ __volatile__(
 "1:	ldrex	%0, [%3]\n"
 "	add	%1, %0, %4\n"
@@ -100,6 +94,7 @@ static inline int arch_spin_trylock(arch_spinlock_t *lock)
 	unsigned long contended, res;
 	u32 slock;
 
+	prefetchw(&lock->slock);
 	do {
 		__asm__ __volatile__(
 		"	ldrex	%0, [%3]\n"
@@ -127,10 +122,14 @@ static inline void arch_spin_unlock(arch_spinlock_t *lock)
 	dsb_sev();
 }
 
+static inline int arch_spin_value_unlocked(arch_spinlock_t lock)
+{
+	return lock.tickets.owner == lock.tickets.next;
+}
+
 static inline int arch_spin_is_locked(arch_spinlock_t *lock)
 {
-	struct __raw_tickets tickets = ACCESS_ONCE(lock->tickets);
-	return tickets.owner != tickets.next;
+	return !arch_spin_value_unlocked(ACCESS_ONCE(*lock));
 }
 
 static inline int arch_spin_is_contended(arch_spinlock_t *lock)
@@ -152,6 +151,7 @@ static inline void arch_write_lock(arch_rwlock_t *rw)
 {
 	unsigned long tmp;
 
+	prefetchw(&rw->lock);
 	__asm__ __volatile__(
 "1:	ldrex	%0, [%1]\n"
 "	teq	%0, #0\n"
@@ -170,6 +170,7 @@ static inline int arch_write_trylock(arch_rwlock_t *rw)
 {
 	unsigned long contended, res;
 
+	prefetchw(&rw->lock);
 	do {
 		__asm__ __volatile__(
 		"	ldrex	%0, [%2]\n"
@@ -203,7 +204,7 @@ static inline void arch_write_unlock(arch_rwlock_t *rw)
 }
 
 /* write_can_lock - would write_trylock() succeed? */
-#define arch_write_can_lock(x)		((x)->lock == 0)
+#define arch_write_can_lock(x)		(ACCESS_ONCE((x)->lock) == 0)
 
 /*
  * Read locks are a bit more hairy:
@@ -221,6 +222,7 @@ static inline void arch_read_lock(arch_rwlock_t *rw)
 {
 	unsigned long tmp, tmp2;
 
+	prefetchw(&rw->lock);
 	__asm__ __volatile__(
 "1:	ldrex	%0, [%2]\n"
 "	adds	%0, %0, #1\n"
@@ -241,6 +243,7 @@ static inline void arch_read_unlock(arch_rwlock_t *rw)
 
 	smp_mb();
 
+	prefetchw(&rw->lock);
 	__asm__ __volatile__(
 "1:	ldrex	%0, [%2]\n"
 "	sub	%0, %0, #1\n"
@@ -259,6 +262,7 @@ static inline int arch_read_trylock(arch_rwlock_t *rw)
 {
 	unsigned long contended, res;
 
+	prefetchw(&rw->lock);
 	do {
 		__asm__ __volatile__(
 		"	ldrex	%0, [%2]\n"
@@ -280,7 +284,7 @@ static inline int arch_read_trylock(arch_rwlock_t *rw)
 }
 
 /* read_can_lock - would read_trylock() succeed? */
-#define arch_read_can_lock(x)		((x)->lock < 0x80000000)
+#define arch_read_can_lock(x)		(ACCESS_ONCE((x)->lock) < 0x80000000)
 
 #define arch_read_lock_flags(lock, flags) arch_read_lock(lock)
 #define arch_write_lock_flags(lock, flags) arch_write_lock(lock)
diff --git a/arch/arm/include/asm/spinlock_types.h b/arch/arm/include/asm/spinlock_types.h
index b262d2f..47663fc 100644
--- a/arch/arm/include/asm/spinlock_types.h
+++ b/arch/arm/include/asm/spinlock_types.h
@@ -25,7 +25,7 @@ typedef struct {
 #define __ARCH_SPIN_LOCK_UNLOCKED	{ { 0 } }
 
 typedef struct {
-	volatile unsigned int lock;
+	u32 lock;
 } arch_rwlock_t;
 
 #define __ARCH_RW_LOCK_UNLOCKED		{ 0 }
diff --git a/arch/arm/include/asm/tlbflush.h b/arch/arm/include/asm/tlbflush.h
index 3896026..def9e57 100644
--- a/arch/arm/include/asm/tlbflush.h
+++ b/arch/arm/include/asm/tlbflush.h
@@ -560,37 +560,6 @@ static inline void __flush_bp_all(void)
 		asm("mcr p15, 0, %0, c7, c1, 6" : : "r" (zero));
 }
 
-#include <asm/cputype.h>
-#ifdef CONFIG_ARM_ERRATA_798181
-static inline int erratum_a15_798181(void)
-{
-	unsigned int midr = read_cpuid_id();
-
-	/* Cortex-A15 r0p0..r3p2 affected */
-	if ((midr & 0xff0ffff0) != 0x410fc0f0 || midr > 0x413fc0f2)
-		return 0;
-	return 1;
-}
-
-static inline void dummy_flush_tlb_a15_erratum(void)
-{
-	/*
-	 * Dummy TLBIMVAIS. Using the unmapped address 0 and ASID 0.
-	 */
-	asm("mcr p15, 0, %0, c8, c3, 1" : : "r" (0));
-	dsb(ish);
-}
-#else
-static inline int erratum_a15_798181(void)
-{
-	return 0;
-}
-
-static inline void dummy_flush_tlb_a15_erratum(void)
-{
-}
-#endif
-
 /*
  *	flush_pmd_entry
  *
@@ -697,4 +666,21 @@ extern void flush_bp_all(void);
 
 #endif
 
+#ifndef __ASSEMBLY__
+#ifdef CONFIG_ARM_ERRATA_798181
+extern void erratum_a15_798181_init(void);
+#else
+static inline void erratum_a15_798181_init(void) {}
+#endif
+extern bool (*erratum_a15_798181_handler)(void);
+
+static inline bool erratum_a15_798181(void)
+{
+	if (unlikely(IS_ENABLED(CONFIG_ARM_ERRATA_798181) &&
+		erratum_a15_798181_handler))
+		return erratum_a15_798181_handler();
+	return false;
+}
+#endif
+
 #endif
diff --git a/arch/arm/include/asm/unified.h b/arch/arm/include/asm/unified.h
index f5989f4..b88beab 100644
--- a/arch/arm/include/asm/unified.h
+++ b/arch/arm/include/asm/unified.h
@@ -38,6 +38,8 @@
 #ifdef __ASSEMBLY__
 #define W(instr)	instr.w
 #define BSYM(sym)	sym + 1
+#else
+#define WASM(instr)	#instr ".w"
 #endif
 
 #else	/* !CONFIG_THUMB2_KERNEL */
@@ -50,6 +52,8 @@
 #ifdef __ASSEMBLY__
 #define W(instr)	instr
 #define BSYM(sym)	sym
+#else
+#define WASM(instr)	#instr
 #endif
 
 #endif	/* CONFIG_THUMB2_KERNEL */
diff --git a/arch/arm/include/debug/efm32.S b/arch/arm/include/debug/efm32.S
new file mode 100644
index 0000000..2265a19
--- /dev/null
+++ b/arch/arm/include/debug/efm32.S
@@ -0,0 +1,45 @@
+/*
+ * Copyright (C) 2013 Pengutronix
+ * Uwe Kleine-Koenig <u.kleine-koenig@pengutronix.de>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#define UARTn_CMD		0x000c
+#define UARTn_CMD_TXEN			0x0004
+
+#define	UARTn_STATUS		0x0010
+#define	UARTn_STATUS_TXC		0x0020
+#define	UARTn_STATUS_TXBL		0x0040
+
+#define	UARTn_TXDATA		0x0034
+
+		.macro	addruart, rx, tmp
+		ldr	\rx, =(CONFIG_DEBUG_UART_PHYS)
+
+		/*
+		 * enable TX. The driver might disable it to save energy. We
+		 * don't care about disabling at the end as during debug power
+		 * consumption isn't that important.
+		 */
+		ldr	\tmp, =(UARTn_CMD_TXEN)
+		str	\tmp, [\rx, #UARTn_CMD]
+		.endm
+
+		.macro	senduart,rd,rx
+		strb	\rd, [\rx, #UARTn_TXDATA]
+		.endm
+
+		.macro	waituart,rd,rx
+1001:		ldr	\rd, [\rx, #UARTn_STATUS]
+		tst	\rd, #UARTn_STATUS_TXBL
+		beq	1001b
+		.endm
+
+		.macro	busyuart,rd,rx
+1001:		ldr	\rd, [\rx, UARTn_STATUS]
+		tst	\rd, #UARTn_STATUS_TXC
+		bne	1001b
+		.endm
diff --git a/arch/arm/include/debug/msm.S b/arch/arm/include/debug/msm.S
index 9166e1b..9d653d4 100644
--- a/arch/arm/include/debug/msm.S
+++ b/arch/arm/include/debug/msm.S
@@ -46,6 +46,11 @@
 #define MSM_DEBUG_UART_PHYS	0x16440000
 #endif
 
+#ifdef CONFIG_DEBUG_MSM8974_UART
+#define MSM_DEBUG_UART_BASE	0xFA71E000
+#define MSM_DEBUG_UART_PHYS	0xF991E000
+#endif
+
 	.macro	addruart, rp, rv, tmp
 #ifdef MSM_DEBUG_UART_PHYS
 	ldr	\rp, =MSM_DEBUG_UART_PHYS
diff --git a/arch/arm/include/debug/pl01x.S b/arch/arm/include/debug/pl01x.S
index 37c6895b..92ef808 100644
--- a/arch/arm/include/debug/pl01x.S
+++ b/arch/arm/include/debug/pl01x.S
@@ -25,12 +25,14 @@
 
 		.macro	waituart,rd,rx
 1001:		ldr	\rd, [\rx, #UART01x_FR]
+ ARM_BE8(	rev	\rd, \rd )
 		tst	\rd, #UART01x_FR_TXFF
 		bne	1001b
 		.endm
 
 		.macro	busyuart,rd,rx
 1001:		ldr	\rd, [\rx, #UART01x_FR]
+ ARM_BE8(	rev	\rd, \rd )
 		tst	\rd, #UART01x_FR_BUSY
 		bne	1001b
 		.endm
diff --git a/arch/arm/include/uapi/asm/Kbuild b/arch/arm/include/uapi/asm/Kbuild
index 18d76fd..70a1c9d 100644
--- a/arch/arm/include/uapi/asm/Kbuild
+++ b/arch/arm/include/uapi/asm/Kbuild
@@ -7,6 +7,7 @@ header-y += hwcap.h
 header-y += ioctls.h
 header-y += kvm_para.h
 header-y += mman.h
+header-y += perf_regs.h
 header-y += posix_types.h
 header-y += ptrace.h
 header-y += setup.h
diff --git a/arch/arm/include/uapi/asm/perf_regs.h b/arch/arm/include/uapi/asm/perf_regs.h
new file mode 100644
index 0000000..ce59448
--- /dev/null
+++ b/arch/arm/include/uapi/asm/perf_regs.h
@@ -0,0 +1,23 @@
+#ifndef _ASM_ARM_PERF_REGS_H
+#define _ASM_ARM_PERF_REGS_H
+
+enum perf_event_arm_regs {
+	PERF_REG_ARM_R0,
+	PERF_REG_ARM_R1,
+	PERF_REG_ARM_R2,
+	PERF_REG_ARM_R3,
+	PERF_REG_ARM_R4,
+	PERF_REG_ARM_R5,
+	PERF_REG_ARM_R6,
+	PERF_REG_ARM_R7,
+	PERF_REG_ARM_R8,
+	PERF_REG_ARM_R9,
+	PERF_REG_ARM_R10,
+	PERF_REG_ARM_FP,
+	PERF_REG_ARM_IP,
+	PERF_REG_ARM_SP,
+	PERF_REG_ARM_LR,
+	PERF_REG_ARM_PC,
+	PERF_REG_ARM_MAX,
+};
+#endif /* _ASM_ARM_PERF_REGS_H */
diff --git a/arch/arm/kernel/Makefile b/arch/arm/kernel/Makefile
index 5140df5f..a30fc9b 100644
--- a/arch/arm/kernel/Makefile
+++ b/arch/arm/kernel/Makefile
@@ -17,7 +17,8 @@ CFLAGS_REMOVE_return_address.o = -pg
 
 obj-y		:= elf.o entry-common.o irq.o opcodes.o \
 		   process.o ptrace.o return_address.o \
-		   setup.o signal.o stacktrace.o sys_arm.o time.o traps.o
+		   setup.o signal.o sigreturn_codes.o \
+		   stacktrace.o sys_arm.o time.o traps.o
 
 obj-$(CONFIG_ATAGS)		+= atags_parse.o
 obj-$(CONFIG_ATAGS_PROC)	+= atags_proc.o
@@ -78,6 +79,7 @@ obj-$(CONFIG_CPU_XSC3)		+= xscale-cp0.o
 obj-$(CONFIG_CPU_MOHAWK)	+= xscale-cp0.o
 obj-$(CONFIG_CPU_PJ4)		+= pj4-cp0.o
 obj-$(CONFIG_IWMMXT)		+= iwmmxt.o
+obj-$(CONFIG_PERF_EVENTS)	+= perf_regs.o
 obj-$(CONFIG_HW_PERF_EVENTS)	+= perf_event.o perf_event_cpu.o
 AFLAGS_iwmmxt.o			:= -Wa,-mcpu=iwmmxt
 obj-$(CONFIG_ARM_CPU_TOPOLOGY)  += topology.o
diff --git a/arch/arm/kernel/armksyms.c b/arch/arm/kernel/armksyms.c
index 60d3b73..1f031dd 100644
--- a/arch/arm/kernel/armksyms.c
+++ b/arch/arm/kernel/armksyms.c
@@ -155,4 +155,5 @@ EXPORT_SYMBOL(__gnu_mcount_nc);
 
 #ifdef CONFIG_ARM_PATCH_PHYS_VIRT
 EXPORT_SYMBOL(__pv_phys_offset);
+EXPORT_SYMBOL(__pv_offset);
 #endif
diff --git a/arch/arm/kernel/entry-armv.S b/arch/arm/kernel/entry-armv.S
index 9cbe70c..b3fb8c9 100644
--- a/arch/arm/kernel/entry-armv.S
+++ b/arch/arm/kernel/entry-armv.S
@@ -192,6 +192,7 @@ __dabt_svc:
 	svc_entry
 	mov	r2, sp
 	dabt_helper
+ THUMB(	ldr	r5, [sp, #S_PSR]	)	@ potentially updated CPSR
 	svc_exit r5				@ return from exception
  UNWIND(.fnend		)
 ENDPROC(__dabt_svc)
@@ -416,9 +417,8 @@ __und_usr:
 	bne	__und_usr_thumb
 	sub	r4, r2, #4			@ ARM instr at LR - 4
 1:	ldrt	r0, [r4]
-#ifdef CONFIG_CPU_ENDIAN_BE8
-	rev	r0, r0				@ little endian instruction
-#endif
+ ARM_BE8(rev	r0, r0)				@ little endian instruction
+
 	@ r0 = 32-bit ARM instruction which caused the exception
 	@ r2 = PC value for the following instruction (:= regs->ARM_pc)
 	@ r4 = PC value for the faulting instruction
diff --git a/arch/arm/kernel/entry-common.S b/arch/arm/kernel/entry-common.S
index bc6bd96..a2dcafd 100644
--- a/arch/arm/kernel/entry-common.S
+++ b/arch/arm/kernel/entry-common.S
@@ -393,9 +393,7 @@ ENTRY(vector_swi)
 #else
  USER(	ldr	r10, [lr, #-4]		)	@ get SWI instruction
 #endif
-#ifdef CONFIG_CPU_ENDIAN_BE8
-	rev	r10, r10			@ little endian instruction
-#endif
+ ARM_BE8(rev	r10, r10)			@ little endian instruction
 
 #elif defined(CONFIG_AEABI)
 
diff --git a/arch/arm/kernel/head.S b/arch/arm/kernel/head.S
index 476de57..7801866 100644
--- a/arch/arm/kernel/head.S
+++ b/arch/arm/kernel/head.S
@@ -77,6 +77,7 @@
 
 	__HEAD
 ENTRY(stext)
+ ARM_BE8(setend	be )			@ ensure we are in BE8 mode
 
  THUMB(	adr	r9, BSYM(1f)	)	@ Kernel is always entered in ARM.
  THUMB(	bx	r9		)	@ If this is a Thumb-2 kernel,
@@ -352,6 +353,9 @@ ENTRY(secondary_startup)
 	 * the processor type - there is no need to check the machine type
 	 * as it has already been validated by the primary processor.
 	 */
+
+ ARM_BE8(setend	be)				@ ensure we are in BE8 mode
+
 #ifdef CONFIG_ARM_VIRT_EXT
 	bl	__hyp_stub_install_secondary
 #endif
@@ -555,6 +559,14 @@ ENTRY(fixup_smp)
 	ldmfd	sp!, {r4 - r6, pc}
 ENDPROC(fixup_smp)
 
+#ifdef __ARMEB__
+#define LOW_OFFSET	0x4
+#define HIGH_OFFSET	0x0
+#else
+#define LOW_OFFSET	0x0
+#define HIGH_OFFSET	0x4
+#endif
+
 #ifdef CONFIG_ARM_PATCH_PHYS_VIRT
 
 /* __fixup_pv_table - patch the stub instructions with the delta between
@@ -565,17 +577,20 @@ ENDPROC(fixup_smp)
 	__HEAD
 __fixup_pv_table:
 	adr	r0, 1f
-	ldmia	r0, {r3-r5, r7}
-	sub	r3, r0, r3	@ PHYS_OFFSET - PAGE_OFFSET
+	ldmia	r0, {r3-r7}
+	mvn	ip, #0
+	subs	r3, r0, r3	@ PHYS_OFFSET - PAGE_OFFSET
 	add	r4, r4, r3	@ adjust table start address
 	add	r5, r5, r3	@ adjust table end address
-	add	r7, r7, r3	@ adjust __pv_phys_offset address
-	str	r8, [r7]	@ save computed PHYS_OFFSET to __pv_phys_offset
+	add	r6, r6, r3	@ adjust __pv_phys_offset address
+	add	r7, r7, r3	@ adjust __pv_offset address
+	str	r8, [r6, #LOW_OFFSET]	@ save computed PHYS_OFFSET to __pv_phys_offset
+	strcc	ip, [r7, #HIGH_OFFSET]	@ save to __pv_offset high bits
 	mov	r6, r3, lsr #24	@ constant for add/sub instructions
 	teq	r3, r6, lsl #24 @ must be 16MiB aligned
 THUMB(	it	ne		@ cross section branch )
 	bne	__error
-	str	r6, [r7, #4]	@ save to __pv_offset
+	str	r3, [r7, #LOW_OFFSET]	@ save to __pv_offset low bits
 	b	__fixup_a_pv_table
 ENDPROC(__fixup_pv_table)
 
@@ -584,10 +599,19 @@ ENDPROC(__fixup_pv_table)
 	.long	__pv_table_begin
 	.long	__pv_table_end
 2:	.long	__pv_phys_offset
+	.long	__pv_offset
 
 	.text
 __fixup_a_pv_table:
+	adr	r0, 3f
+	ldr	r6, [r0]
+	add	r6, r6, r3
+	ldr	r0, [r6, #HIGH_OFFSET]	@ pv_offset high word
+	ldr	r6, [r6, #LOW_OFFSET]	@ pv_offset low word
+	mov	r6, r6, lsr #24
+	cmn	r0, #1
 #ifdef CONFIG_THUMB2_KERNEL
+	moveq	r0, #0x200000	@ set bit 21, mov to mvn instruction
 	lsls	r6, #24
 	beq	2f
 	clz	r7, r6
@@ -601,18 +625,42 @@ __fixup_a_pv_table:
 	b	2f
 1:	add     r7, r3
 	ldrh	ip, [r7, #2]
-	and	ip, 0x8f00
-	orr	ip, r6	@ mask in offset bits 31-24
+ARM_BE8(rev16	ip, ip)
+	tst	ip, #0x4000
+	and	ip, #0x8f00
+	orrne	ip, r6	@ mask in offset bits 31-24
+	orreq	ip, r0	@ mask in offset bits 7-0
+ARM_BE8(rev16	ip, ip)
 	strh	ip, [r7, #2]
+	bne	2f
+	ldrh	ip, [r7]
+ARM_BE8(rev16	ip, ip)
+	bic	ip, #0x20
+	orr	ip, ip, r0, lsr #16
+ARM_BE8(rev16	ip, ip)
+	strh	ip, [r7]
 2:	cmp	r4, r5
 	ldrcc	r7, [r4], #4	@ use branch for delay slot
 	bcc	1b
 	bx	lr
 #else
+	moveq	r0, #0x400000	@ set bit 22, mov to mvn instruction
 	b	2f
 1:	ldr	ip, [r7, r3]
+#ifdef CONFIG_CPU_ENDIAN_BE8
+	@ in BE8, we load data in BE, but instructions still in LE
+	bic	ip, ip, #0xff000000
+	tst	ip, #0x000f0000	@ check the rotation field
+	orrne	ip, ip, r6, lsl #24 @ mask in offset bits 31-24
+	biceq	ip, ip, #0x00004000 @ clear bit 22
+	orreq	ip, ip, r0, lsl #24 @ mask in offset bits 7-0
+#else
 	bic	ip, ip, #0x000000ff
-	orr	ip, ip, r6	@ mask in offset bits 31-24
+	tst	ip, #0xf00	@ check the rotation field
+	orrne	ip, ip, r6	@ mask in offset bits 31-24
+	biceq	ip, ip, #0x400000	@ clear bit 22
+	orreq	ip, ip, r0	@ mask in offset bits 7-0
+#endif
 	str	ip, [r7, r3]
 2:	cmp	r4, r5
 	ldrcc	r7, [r4], #4	@ use branch for delay slot
@@ -621,28 +669,30 @@ __fixup_a_pv_table:
 #endif
 ENDPROC(__fixup_a_pv_table)
 
+	.align
+3:	.long __pv_offset
+
 ENTRY(fixup_pv_table)
 	stmfd	sp!, {r4 - r7, lr}
-	ldr	r2, 2f			@ get address of __pv_phys_offset
 	mov	r3, #0			@ no offset
 	mov	r4, r0			@ r0 = table start
 	add	r5, r0, r1		@ r1 = table size
-	ldr	r6, [r2, #4]		@ get __pv_offset
 	bl	__fixup_a_pv_table
 	ldmfd	sp!, {r4 - r7, pc}
 ENDPROC(fixup_pv_table)
 
-	.align
-2:	.long	__pv_phys_offset
-
 	.data
 	.globl	__pv_phys_offset
 	.type	__pv_phys_offset, %object
 __pv_phys_offset:
-	.long	0
-	.size	__pv_phys_offset, . - __pv_phys_offset
+	.quad	0
+	.size	__pv_phys_offset, . -__pv_phys_offset
+
+	.globl	__pv_offset
+	.type	__pv_offset, %object
 __pv_offset:
-	.long	0
+	.quad	0
+	.size	__pv_offset, . -__pv_offset
 #endif
 
 #include "head-common.S"
diff --git a/arch/arm/kernel/hw_breakpoint.c b/arch/arm/kernel/hw_breakpoint.c
index 7b95de6..3d44660 100644
--- a/arch/arm/kernel/hw_breakpoint.c
+++ b/arch/arm/kernel/hw_breakpoint.c
@@ -344,13 +344,13 @@ int arch_install_hw_breakpoint(struct perf_event *bp)
 		/* Breakpoint */
 		ctrl_base = ARM_BASE_BCR;
 		val_base = ARM_BASE_BVR;
-		slots = (struct perf_event **)__get_cpu_var(bp_on_reg);
+		slots = this_cpu_ptr(bp_on_reg);
 		max_slots = core_num_brps;
 	} else {
 		/* Watchpoint */
 		ctrl_base = ARM_BASE_WCR;
 		val_base = ARM_BASE_WVR;
-		slots = (struct perf_event **)__get_cpu_var(wp_on_reg);
+		slots = this_cpu_ptr(wp_on_reg);
 		max_slots = core_num_wrps;
 	}
 
@@ -396,12 +396,12 @@ void arch_uninstall_hw_breakpoint(struct perf_event *bp)
 	if (info->ctrl.type == ARM_BREAKPOINT_EXECUTE) {
 		/* Breakpoint */
 		base = ARM_BASE_BCR;
-		slots = (struct perf_event **)__get_cpu_var(bp_on_reg);
+		slots = this_cpu_ptr(bp_on_reg);
 		max_slots = core_num_brps;
 	} else {
 		/* Watchpoint */
 		base = ARM_BASE_WCR;
-		slots = (struct perf_event **)__get_cpu_var(wp_on_reg);
+		slots = this_cpu_ptr(wp_on_reg);
 		max_slots = core_num_wrps;
 	}
 
@@ -697,7 +697,7 @@ static void watchpoint_handler(unsigned long addr, unsigned int fsr,
 	struct arch_hw_breakpoint *info;
 	struct arch_hw_breakpoint_ctrl ctrl;
 
-	slots = (struct perf_event **)__get_cpu_var(wp_on_reg);
+	slots = this_cpu_ptr(wp_on_reg);
 
 	for (i = 0; i < core_num_wrps; ++i) {
 		rcu_read_lock();
@@ -768,7 +768,7 @@ static void watchpoint_single_step_handler(unsigned long pc)
 	struct perf_event *wp, **slots;
 	struct arch_hw_breakpoint *info;
 
-	slots = (struct perf_event **)__get_cpu_var(wp_on_reg);
+	slots = this_cpu_ptr(wp_on_reg);
 
 	for (i = 0; i < core_num_wrps; ++i) {
 		rcu_read_lock();
@@ -802,7 +802,7 @@ static void breakpoint_handler(unsigned long unknown, struct pt_regs *regs)
 	struct arch_hw_breakpoint *info;
 	struct arch_hw_breakpoint_ctrl ctrl;
 
-	slots = (struct perf_event **)__get_cpu_var(bp_on_reg);
+	slots = this_cpu_ptr(bp_on_reg);
 
 	/* The exception entry code places the amended lr in the PC. */
 	addr = regs->ARM_pc;
diff --git a/arch/arm/kernel/kprobes.c b/arch/arm/kernel/kprobes.c
index 170e9f3..a7b621e 100644
--- a/arch/arm/kernel/kprobes.c
+++ b/arch/arm/kernel/kprobes.c
@@ -171,13 +171,13 @@ static void __kprobes save_previous_kprobe(struct kprobe_ctlblk *kcb)
 
 static void __kprobes restore_previous_kprobe(struct kprobe_ctlblk *kcb)
 {
-	__get_cpu_var(current_kprobe) = kcb->prev_kprobe.kp;
+	__this_cpu_write(current_kprobe, kcb->prev_kprobe.kp);
 	kcb->kprobe_status = kcb->prev_kprobe.status;
 }
 
 static void __kprobes set_current_kprobe(struct kprobe *p)
 {
-	__get_cpu_var(current_kprobe) = p;
+	__this_cpu_write(current_kprobe, p);
 }
 
 static void __kprobes
@@ -421,10 +421,10 @@ static __used __kprobes void *trampoline_handler(struct pt_regs *regs)
 			continue;
 
 		if (ri->rp && ri->rp->handler) {
-			__get_cpu_var(current_kprobe) = &ri->rp->kp;
+			__this_cpu_write(current_kprobe, &ri->rp->kp);
 			get_kprobe_ctlblk()->kprobe_status = KPROBE_HIT_ACTIVE;
 			ri->rp->handler(ri, regs);
-			__get_cpu_var(current_kprobe) = NULL;
+			__this_cpu_write(current_kprobe, NULL);
 		}
 
 		orig_ret_address = (unsigned long)ri->ret_addr;
diff --git a/arch/arm/kernel/module.c b/arch/arm/kernel/module.c
index c9dfff3..45e4781 100644
--- a/arch/arm/kernel/module.c
+++ b/arch/arm/kernel/module.c
@@ -24,6 +24,7 @@
 #include <asm/sections.h>
 #include <asm/smp_plat.h>
 #include <asm/unwind.h>
+#include <asm/opcodes.h>
 
 #ifdef CONFIG_XIP_KERNEL
 /*
@@ -60,6 +61,7 @@ apply_relocate(Elf32_Shdr *sechdrs, const char *strtab, unsigned int symindex,
 		Elf32_Sym *sym;
 		const char *symname;
 		s32 offset;
+		u32 tmp;
 #ifdef CONFIG_THUMB2_KERNEL
 		u32 upper, lower, sign, j1, j2;
 #endif
@@ -95,7 +97,8 @@ apply_relocate(Elf32_Shdr *sechdrs, const char *strtab, unsigned int symindex,
 		case R_ARM_PC24:
 		case R_ARM_CALL:
 		case R_ARM_JUMP24:
-			offset = (*(u32 *)loc & 0x00ffffff) << 2;
+			offset = __mem_to_opcode_arm(*(u32 *)loc);
+			offset = (offset & 0x00ffffff) << 2;
 			if (offset & 0x02000000)
 				offset -= 0x04000000;
 
@@ -111,9 +114,10 @@ apply_relocate(Elf32_Shdr *sechdrs, const char *strtab, unsigned int symindex,
 			}
 
 			offset >>= 2;
+			offset &= 0x00ffffff;
 
-			*(u32 *)loc &= 0xff000000;
-			*(u32 *)loc |= offset & 0x00ffffff;
+			*(u32 *)loc &= __opcode_to_mem_arm(0xff000000);
+			*(u32 *)loc |= __opcode_to_mem_arm(offset);
 			break;
 
 	       case R_ARM_V4BX:
@@ -121,8 +125,8 @@ apply_relocate(Elf32_Shdr *sechdrs, const char *strtab, unsigned int symindex,
 			* other bits to re-code instruction as
 			* MOV PC,Rm.
 			*/
-		       *(u32 *)loc &= 0xf000000f;
-		       *(u32 *)loc |= 0x01a0f000;
+		       *(u32 *)loc &= __opcode_to_mem_arm(0xf000000f);
+		       *(u32 *)loc |= __opcode_to_mem_arm(0x01a0f000);
 		       break;
 
 		case R_ARM_PREL31:
@@ -132,7 +136,7 @@ apply_relocate(Elf32_Shdr *sechdrs, const char *strtab, unsigned int symindex,
 
 		case R_ARM_MOVW_ABS_NC:
 		case R_ARM_MOVT_ABS:
-			offset = *(u32 *)loc;
+			offset = tmp = __mem_to_opcode_arm(*(u32 *)loc);
 			offset = ((offset & 0xf0000) >> 4) | (offset & 0xfff);
 			offset = (offset ^ 0x8000) - 0x8000;
 
@@ -140,16 +144,18 @@ apply_relocate(Elf32_Shdr *sechdrs, const char *strtab, unsigned int symindex,
 			if (ELF32_R_TYPE(rel->r_info) == R_ARM_MOVT_ABS)
 				offset >>= 16;
 
-			*(u32 *)loc &= 0xfff0f000;
-			*(u32 *)loc |= ((offset & 0xf000) << 4) |
-					(offset & 0x0fff);
+			tmp &= 0xfff0f000;
+			tmp |= ((offset & 0xf000) << 4) |
+				(offset & 0x0fff);
+
+			*(u32 *)loc = __opcode_to_mem_arm(tmp);
 			break;
 
 #ifdef CONFIG_THUMB2_KERNEL
 		case R_ARM_THM_CALL:
 		case R_ARM_THM_JUMP24:
-			upper = *(u16 *)loc;
-			lower = *(u16 *)(loc + 2);
+			upper = __mem_to_opcode_thumb16(*(u16 *)loc);
+			lower = __mem_to_opcode_thumb16(*(u16 *)(loc + 2));
 
 			/*
 			 * 25 bit signed address range (Thumb-2 BL and B.W
@@ -198,17 +204,20 @@ apply_relocate(Elf32_Shdr *sechdrs, const char *strtab, unsigned int symindex,
 			sign = (offset >> 24) & 1;
 			j1 = sign ^ (~(offset >> 23) & 1);
 			j2 = sign ^ (~(offset >> 22) & 1);
-			*(u16 *)loc = (u16)((upper & 0xf800) | (sign << 10) |
+			upper = (u16)((upper & 0xf800) | (sign << 10) |
 					    ((offset >> 12) & 0x03ff));
-			*(u16 *)(loc + 2) = (u16)((lower & 0xd000) |
-						  (j1 << 13) | (j2 << 11) |
-						  ((offset >> 1) & 0x07ff));
+			lower = (u16)((lower & 0xd000) |
+				      (j1 << 13) | (j2 << 11) |
+				      ((offset >> 1) & 0x07ff));
+
+			*(u16 *)loc = __opcode_to_mem_thumb16(upper);
+			*(u16 *)(loc + 2) = __opcode_to_mem_thumb16(lower);
 			break;
 
 		case R_ARM_THM_MOVW_ABS_NC:
 		case R_ARM_THM_MOVT_ABS:
-			upper = *(u16 *)loc;
-			lower = *(u16 *)(loc + 2);
+			upper = __mem_to_opcode_thumb16(*(u16 *)loc);
+			lower = __mem_to_opcode_thumb16(*(u16 *)(loc + 2));
 
 			/*
 			 * MOVT/MOVW instructions encoding in Thumb-2:
@@ -229,12 +238,14 @@ apply_relocate(Elf32_Shdr *sechdrs, const char *strtab, unsigned int symindex,
 			if (ELF32_R_TYPE(rel->r_info) == R_ARM_THM_MOVT_ABS)
 				offset >>= 16;
 
-			*(u16 *)loc = (u16)((upper & 0xfbf0) |
-					    ((offset & 0xf000) >> 12) |
-					    ((offset & 0x0800) >> 1));
-			*(u16 *)(loc + 2) = (u16)((lower & 0x8f00) |
-						  ((offset & 0x0700) << 4) |
-						  (offset & 0x00ff));
+			upper = (u16)((upper & 0xfbf0) |
+				      ((offset & 0xf000) >> 12) |
+				      ((offset & 0x0800) >> 1));
+			lower = (u16)((lower & 0x8f00) |
+				      ((offset & 0x0700) << 4) |
+				      (offset & 0x00ff));
+			*(u16 *)loc = __opcode_to_mem_thumb16(upper);
+			*(u16 *)(loc + 2) = __opcode_to_mem_thumb16(lower);
 			break;
 #endif
 
diff --git a/arch/arm/kernel/perf_event.c b/arch/arm/kernel/perf_event.c
index e186ee1..bc3f2ef 100644
--- a/arch/arm/kernel/perf_event.c
+++ b/arch/arm/kernel/perf_event.c
@@ -256,12 +256,11 @@ validate_event(struct pmu_hw_events *hw_events,
 	       struct perf_event *event)
 {
 	struct arm_pmu *armpmu = to_arm_pmu(event->pmu);
-	struct pmu *leader_pmu = event->group_leader->pmu;
 
 	if (is_software_event(event))
 		return 1;
 
-	if (event->pmu != leader_pmu || event->state < PERF_EVENT_STATE_OFF)
+	if (event->state < PERF_EVENT_STATE_OFF)
 		return 1;
 
 	if (event->state == PERF_EVENT_STATE_OFF && !event->attr.enable_on_exec)
diff --git a/arch/arm/kernel/perf_event_cpu.c b/arch/arm/kernel/perf_event_cpu.c
index 8d6147b..d85055c 100644
--- a/arch/arm/kernel/perf_event_cpu.c
+++ b/arch/arm/kernel/perf_event_cpu.c
@@ -68,7 +68,7 @@ EXPORT_SYMBOL_GPL(perf_num_counters);
 
 static struct pmu_hw_events *cpu_pmu_get_cpu_events(void)
 {
-	return &__get_cpu_var(cpu_hw_events);
+	return this_cpu_ptr(&cpu_hw_events);
 }
 
 static void cpu_pmu_free_irq(struct arm_pmu *cpu_pmu)
diff --git a/arch/arm/kernel/perf_regs.c b/arch/arm/kernel/perf_regs.c
new file mode 100644
index 0000000..6e4379c
--- /dev/null
+++ b/arch/arm/kernel/perf_regs.c
@@ -0,0 +1,30 @@
+
+#include <linux/errno.h>
+#include <linux/kernel.h>
+#include <linux/perf_event.h>
+#include <linux/bug.h>
+#include <asm/perf_regs.h>
+#include <asm/ptrace.h>
+
+u64 perf_reg_value(struct pt_regs *regs, int idx)
+{
+	if (WARN_ON_ONCE((u32)idx >= PERF_REG_ARM_MAX))
+		return 0;
+
+	return regs->uregs[idx];
+}
+
+#define REG_RESERVED (~((1ULL << PERF_REG_ARM_MAX) - 1))
+
+int perf_reg_validate(u64 mask)
+{
+	if (!mask || mask & REG_RESERVED)
+		return -EINVAL;
+
+	return 0;
+}
+
+u64 perf_reg_abi(struct task_struct *task)
+{
+	return PERF_SAMPLE_REGS_ABI_32;
+}
diff --git a/arch/arm/kernel/setup.c b/arch/arm/kernel/setup.c
index 5d65438..6a1b8a8 100644
--- a/arch/arm/kernel/setup.c
+++ b/arch/arm/kernel/setup.c
@@ -73,6 +73,8 @@ __setup("fpe=", fpe_setup);
 #endif
 
 extern void paging_init(const struct machine_desc *desc);
+extern void early_paging_init(const struct machine_desc *,
+			      struct proc_info_list *);
 extern void sanity_check_meminfo(void);
 extern enum reboot_mode reboot_mode;
 extern void setup_dma_zone(const struct machine_desc *desc);
@@ -599,6 +601,8 @@ static void __init setup_processor(void)
 	elf_hwcap &= ~(HWCAP_THUMB | HWCAP_IDIVT);
 #endif
 
+	erratum_a15_798181_init();
+
 	feat_v6_fixup();
 
 	cacheid_init();
@@ -619,9 +623,10 @@ void __init dump_machine_table(void)
 		/* can't use cpu_relax() here as it may require MMU setup */;
 }
 
-int __init arm_add_memory(phys_addr_t start, phys_addr_t size)
+int __init arm_add_memory(u64 start, u64 size)
 {
 	struct membank *bank = &meminfo.bank[meminfo.nr_banks];
+	u64 aligned_start;
 
 	if (meminfo.nr_banks >= NR_BANKS) {
 		printk(KERN_CRIT "NR_BANKS too low, "
@@ -634,10 +639,16 @@ int __init arm_add_memory(phys_addr_t start, phys_addr_t size)
 	 * Size is appropriately rounded down, start is rounded up.
 	 */
 	size -= start & ~PAGE_MASK;
-	bank->start = PAGE_ALIGN(start);
+	aligned_start = PAGE_ALIGN(start);
 
-#ifndef CONFIG_ARM_LPAE
-	if (bank->start + size < bank->start) {
+#ifndef CONFIG_ARCH_PHYS_ADDR_T_64BIT
+	if (aligned_start > ULONG_MAX) {
+		printk(KERN_CRIT "Ignoring memory at 0x%08llx outside "
+		       "32-bit physical address space\n", (long long)start);
+		return -EINVAL;
+	}
+
+	if (aligned_start + size > ULONG_MAX) {
 		printk(KERN_CRIT "Truncating memory at 0x%08llx to fit in "
 			"32-bit physical address space\n", (long long)start);
 		/*
@@ -645,10 +656,11 @@ int __init arm_add_memory(phys_addr_t start, phys_addr_t size)
 		 * 32 bits, we use ULONG_MAX as the upper limit rather than 4GB.
 		 * This means we lose a page after masking.
 		 */
-		size = ULONG_MAX - bank->start;
+		size = ULONG_MAX - aligned_start;
 	}
 #endif
 
+	bank->start = aligned_start;
 	bank->size = size & ~(phys_addr_t)(PAGE_SIZE - 1);
 
 	/*
@@ -669,8 +681,8 @@ int __init arm_add_memory(phys_addr_t start, phys_addr_t size)
 static int __init early_mem(char *p)
 {
 	static int usermem __initdata = 0;
-	phys_addr_t size;
-	phys_addr_t start;
+	u64 size;
+	u64 start;
 	char *endp;
 
 	/*
@@ -878,6 +890,8 @@ void __init setup_arch(char **cmdline_p)
 	parse_early_param();
 
 	sort(&meminfo.bank, meminfo.nr_banks, sizeof(meminfo.bank[0]), meminfo_cmp, NULL);
+
+	early_paging_init(mdesc, lookup_processor_type(read_cpuid_id()));
 	sanity_check_meminfo();
 	arm_memblock_init(&meminfo, mdesc);
 
diff --git a/arch/arm/kernel/signal.c b/arch/arm/kernel/signal.c
index ab33042..04d6388 100644
--- a/arch/arm/kernel/signal.c
+++ b/arch/arm/kernel/signal.c
@@ -21,29 +21,7 @@
 #include <asm/unistd.h>
 #include <asm/vfp.h>
 
-/*
- * For ARM syscalls, we encode the syscall number into the instruction.
- */
-#define SWI_SYS_SIGRETURN	(0xef000000|(__NR_sigreturn)|(__NR_OABI_SYSCALL_BASE))
-#define SWI_SYS_RT_SIGRETURN	(0xef000000|(__NR_rt_sigreturn)|(__NR_OABI_SYSCALL_BASE))
-
-/*
- * With EABI, the syscall number has to be loaded into r7.
- */
-#define MOV_R7_NR_SIGRETURN	(0xe3a07000 | (__NR_sigreturn - __NR_SYSCALL_BASE))
-#define MOV_R7_NR_RT_SIGRETURN	(0xe3a07000 | (__NR_rt_sigreturn - __NR_SYSCALL_BASE))
-
-/*
- * For Thumb syscalls, we pass the syscall number via r7.  We therefore
- * need two 16-bit instructions.
- */
-#define SWI_THUMB_SIGRETURN	(0xdf00 << 16 | 0x2700 | (__NR_sigreturn - __NR_SYSCALL_BASE))
-#define SWI_THUMB_RT_SIGRETURN	(0xdf00 << 16 | 0x2700 | (__NR_rt_sigreturn - __NR_SYSCALL_BASE))
-
-static const unsigned long sigreturn_codes[7] = {
-	MOV_R7_NR_SIGRETURN,    SWI_SYS_SIGRETURN,    SWI_THUMB_SIGRETURN,
-	MOV_R7_NR_RT_SIGRETURN, SWI_SYS_RT_SIGRETURN, SWI_THUMB_RT_SIGRETURN,
-};
+extern const unsigned long sigreturn_codes[7];
 
 static unsigned long signal_return_offset;
 
@@ -375,12 +353,18 @@ setup_return(struct pt_regs *regs, struct ksignal *ksig,
 		 */
 		thumb = handler & 1;
 
-		if (thumb) {
-			cpsr |= PSR_T_BIT;
 #if __LINUX_ARM_ARCH__ >= 7
-			/* clear the If-Then Thumb-2 execution state */
-			cpsr &= ~PSR_IT_MASK;
+		/*
+		 * Clear the If-Then Thumb-2 execution state
+		 * ARM spec requires this to be all 000s in ARM mode
+		 * Snapdragon S4/Krait misbehaves on a Thumb=>ARM
+		 * signal transition without this.
+		 */
+		cpsr &= ~PSR_IT_MASK;
 #endif
+
+		if (thumb) {
+			cpsr |= PSR_T_BIT;
 		} else
 			cpsr &= ~PSR_T_BIT;
 	}
diff --git a/arch/arm/kernel/sigreturn_codes.S b/arch/arm/kernel/sigreturn_codes.S
new file mode 100644
index 0000000..3c5d0f2
--- /dev/null
+++ b/arch/arm/kernel/sigreturn_codes.S
@@ -0,0 +1,80 @@
+/*
+ * sigreturn_codes.S - code sinpets for sigreturn syscalls
+ *
+ * Created by:	Victor Kamensky, 2013-08-13
+ * Copyright:	(C) 2013  Linaro Limited
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#include <asm/unistd.h>
+
+/*
+ * For ARM syscalls, we encode the syscall number into the instruction.
+ * With EABI, the syscall number has to be loaded into r7. As result
+ * ARM syscall sequence snippet will have move and svc in .arm encoding
+ *
+ * For Thumb syscalls, we pass the syscall number via r7.  We therefore
+ * need two 16-bit instructions in .thumb encoding
+ *
+ * Please note sigreturn_codes code are not executed in place. Instead
+ * they just copied by kernel into appropriate places. Code inside of
+ * arch/arm/kernel/signal.c is very sensitive to layout of these code
+ * snippets.
+ */
+
+#if __LINUX_ARM_ARCH__ <= 4
+	/*
+	 * Note we manually set minimally required arch that supports
+	 * required thumb opcodes for early arch versions. It is OK
+	 * for this file to be used in combination with other
+	 * lower arch variants, since these code snippets are only
+	 * used as input data.
+	 */
+	.arch armv4t
+#endif
+
+	.section .rodata
+	.global sigreturn_codes
+	.type	sigreturn_codes, #object
+
+	.arm
+
+sigreturn_codes:
+
+	/* ARM sigreturn syscall code snippet */
+	mov	r7, #(__NR_sigreturn - __NR_SYSCALL_BASE)
+	swi	#(__NR_sigreturn)|(__NR_OABI_SYSCALL_BASE)
+
+	/* Thumb sigreturn syscall code snippet */
+	.thumb
+	movs	r7, #(__NR_sigreturn - __NR_SYSCALL_BASE)
+	swi	#0
+
+	/* ARM sigreturn_rt syscall code snippet */
+	.arm
+	mov	r7, #(__NR_rt_sigreturn - __NR_SYSCALL_BASE)
+	swi	#(__NR_rt_sigreturn)|(__NR_OABI_SYSCALL_BASE)
+
+	/* Thumb sigreturn_rt syscall code snippet */
+	.thumb
+	movs	r7, #(__NR_rt_sigreturn - __NR_SYSCALL_BASE)
+	swi	#0
+
+	/*
+	 * Note on addtional space: setup_return in signal.c
+	 * algorithm uses two words copy regardless whether
+	 * it is thumb case or not, so we need additional
+	 * word after real last entry.
+	 */
+	.arm
+	.space	4
+
+	.size	sigreturn_codes, . - sigreturn_codes
diff --git a/arch/arm/kernel/sleep.S b/arch/arm/kernel/sleep.S
index db1536b..b907d9b 100644
--- a/arch/arm/kernel/sleep.S
+++ b/arch/arm/kernel/sleep.S
@@ -55,6 +55,7 @@
  * specific registers and some other data for resume.
  *  r0 = suspend function arg0
  *  r1 = suspend function
+ *  r2 = MPIDR value the resuming CPU will use
  */
 ENTRY(__cpu_suspend)
 	stmfd	sp!, {r4 - r11, lr}
@@ -67,23 +68,18 @@ ENTRY(__cpu_suspend)
 	mov	r5, sp			@ current virtual SP
 	add	r4, r4, #12		@ Space for pgd, virt sp, phys resume fn
 	sub	sp, sp, r4		@ allocate CPU state on stack
-	stmfd	sp!, {r0, r1}		@ save suspend func arg and pointer
-	add	r0, sp, #8		@ save pointer to save block
-	mov	r1, r4			@ size of save block
-	mov	r2, r5			@ virtual SP
 	ldr	r3, =sleep_save_sp
+	stmfd	sp!, {r0, r1}		@ save suspend func arg and pointer
 	ldr	r3, [r3, #SLEEP_SAVE_SP_VIRT]
-	ALT_SMP(mrc p15, 0, r9, c0, c0, 5)
-        ALT_UP_B(1f)
-	ldr	r8, =mpidr_hash
-	/*
-	 * This ldmia relies on the memory layout of the mpidr_hash
-	 * struct mpidr_hash.
-	 */
-	ldmia	r8, {r4-r7}	@ r4 = mpidr mask (r5,r6,r7) = l[0,1,2] shifts
-	compute_mpidr_hash	lr, r5, r6, r7, r9, r4
-	add	r3, r3, lr, lsl #2
-1:
+	ALT_SMP(ldr r0, =mpidr_hash)
+	ALT_UP_B(1f)
+	/* This ldmia relies on the memory layout of the mpidr_hash struct */
+	ldmia	r0, {r1, r6-r8}	@ r1 = mpidr mask (r6,r7,r8) = l[0,1,2] shifts
+	compute_mpidr_hash	r0, r6, r7, r8, r2, r1
+	add	r3, r3, r0, lsl #2
+1:	mov	r2, r5			@ virtual SP
+	mov	r1, r4			@ size of save block
+	add	r0, sp, #8		@ pointer to save block
 	bl	__cpu_suspend_save
 	adr	lr, BSYM(cpu_suspend_abort)
 	ldmfd	sp!, {r0, pc}		@ call suspend fn
@@ -130,6 +126,7 @@ ENDPROC(cpu_resume_after_mmu)
 	.data
 	.align
 ENTRY(cpu_resume)
+ARM_BE8(setend be)			@ ensure we are in BE mode
 	mov	r1, #0
 	ALT_SMP(mrc p15, 0, r0, c0, c0, 5)
 	ALT_UP_B(1f)
diff --git a/arch/arm/kernel/smp.c b/arch/arm/kernel/smp.c
index 72024ea..dc894ab 100644
--- a/arch/arm/kernel/smp.c
+++ b/arch/arm/kernel/smp.c
@@ -25,6 +25,7 @@
 #include <linux/clockchips.h>
 #include <linux/completion.h>
 #include <linux/cpufreq.h>
+#include <linux/irq_work.h>
 
 #include <linux/atomic.h>
 #include <asm/smp.h>
@@ -66,6 +67,8 @@ enum ipi_msg_type {
 	IPI_CALL_FUNC,
 	IPI_CALL_FUNC_SINGLE,
 	IPI_CPU_STOP,
+	IPI_IRQ_WORK,
+	IPI_COMPLETION,
 };
 
 static DECLARE_COMPLETION(cpu_running);
@@ -80,7 +83,7 @@ void __init smp_set_ops(struct smp_operations *ops)
 
 static unsigned long get_arch_pgd(pgd_t *pgd)
 {
-	phys_addr_t pgdir = virt_to_phys(pgd);
+	phys_addr_t pgdir = virt_to_idmap(pgd);
 	BUG_ON(pgdir & ARCH_PGD_MASK);
 	return pgdir >> ARCH_PGD_SHIFT;
 }
@@ -448,6 +451,14 @@ void arch_send_call_function_single_ipi(int cpu)
 	smp_cross_call(cpumask_of(cpu), IPI_CALL_FUNC_SINGLE);
 }
 
+#ifdef CONFIG_IRQ_WORK
+void arch_irq_work_raise(void)
+{
+	if (is_smp())
+		smp_cross_call(cpumask_of(smp_processor_id()), IPI_IRQ_WORK);
+}
+#endif
+
 static const char *ipi_types[NR_IPI] = {
 #define S(x,s)	[x] = s
 	S(IPI_WAKEUP, "CPU wakeup interrupts"),
@@ -456,6 +467,8 @@ static const char *ipi_types[NR_IPI] = {
 	S(IPI_CALL_FUNC, "Function call interrupts"),
 	S(IPI_CALL_FUNC_SINGLE, "Single function call interrupts"),
 	S(IPI_CPU_STOP, "CPU stop interrupts"),
+	S(IPI_IRQ_WORK, "IRQ work interrupts"),
+	S(IPI_COMPLETION, "completion interrupts"),
 };
 
 void show_ipi_list(struct seq_file *p, int prec)
@@ -515,6 +528,19 @@ static void ipi_cpu_stop(unsigned int cpu)
 		cpu_relax();
 }
 
+static DEFINE_PER_CPU(struct completion *, cpu_completion);
+
+int register_ipi_completion(struct completion *completion, int cpu)
+{
+	per_cpu(cpu_completion, cpu) = completion;
+	return IPI_COMPLETION;
+}
+
+static void ipi_complete(unsigned int cpu)
+{
+	complete(per_cpu(cpu_completion, cpu));
+}
+
 /*
  * Main handler for inter-processor interrupts
  */
@@ -565,6 +591,20 @@ void handle_IPI(int ipinr, struct pt_regs *regs)
 		irq_exit();
 		break;
 
+#ifdef CONFIG_IRQ_WORK
+	case IPI_IRQ_WORK:
+		irq_enter();
+		irq_work_run();
+		irq_exit();
+		break;
+#endif
+
+	case IPI_COMPLETION:
+		irq_enter();
+		ipi_complete(cpu);
+		irq_exit();
+		break;
+
 	default:
 		printk(KERN_CRIT "CPU%u: Unknown IPI message 0x%x\n",
 		       cpu, ipinr);
diff --git a/arch/arm/kernel/smp_scu.c b/arch/arm/kernel/smp_scu.c
index 5bc1a63..1aafa0d 100644
--- a/arch/arm/kernel/smp_scu.c
+++ b/arch/arm/kernel/smp_scu.c
@@ -28,7 +28,7 @@
  */
 unsigned int __init scu_get_core_count(void __iomem *scu_base)
 {
-	unsigned int ncores = __raw_readl(scu_base + SCU_CONFIG);
+	unsigned int ncores = readl_relaxed(scu_base + SCU_CONFIG);
 	return (ncores & 0x03) + 1;
 }
 
@@ -42,19 +42,19 @@ void scu_enable(void __iomem *scu_base)
 #ifdef CONFIG_ARM_ERRATA_764369
 	/* Cortex-A9 only */
 	if ((read_cpuid_id() & 0xff0ffff0) == 0x410fc090) {
-		scu_ctrl = __raw_readl(scu_base + 0x30);
+		scu_ctrl = readl_relaxed(scu_base + 0x30);
 		if (!(scu_ctrl & 1))
-			__raw_writel(scu_ctrl | 0x1, scu_base + 0x30);
+			writel_relaxed(scu_ctrl | 0x1, scu_base + 0x30);
 	}
 #endif
 
-	scu_ctrl = __raw_readl(scu_base + SCU_CTRL);
+	scu_ctrl = readl_relaxed(scu_base + SCU_CTRL);
 	/* already enabled? */
 	if (scu_ctrl & 1)
 		return;
 
 	scu_ctrl |= 1;
-	__raw_writel(scu_ctrl, scu_base + SCU_CTRL);
+	writel_relaxed(scu_ctrl, scu_base + SCU_CTRL);
 
 	/*
 	 * Ensure that the data accessed by CPU0 before the SCU was
@@ -80,9 +80,9 @@ int scu_power_mode(void __iomem *scu_base, unsigned int mode)
 	if (mode > 3 || mode == 1 || cpu > 3)
 		return -EINVAL;
 
-	val = __raw_readb(scu_base + SCU_CPU_STATUS + cpu) & ~0x03;
+	val = readb_relaxed(scu_base + SCU_CPU_STATUS + cpu) & ~0x03;
 	val |= mode;
-	__raw_writeb(val, scu_base + SCU_CPU_STATUS + cpu);
+	writeb_relaxed(val, scu_base + SCU_CPU_STATUS + cpu);
 
 	return 0;
 }
diff --git a/arch/arm/kernel/smp_tlb.c b/arch/arm/kernel/smp_tlb.c
index 83ccca3..95d0636 100644
--- a/arch/arm/kernel/smp_tlb.c
+++ b/arch/arm/kernel/smp_tlb.c
@@ -70,6 +70,40 @@ static inline void ipi_flush_bp_all(void *ignored)
 	local_flush_bp_all();
 }
 
+#ifdef CONFIG_ARM_ERRATA_798181
+bool (*erratum_a15_798181_handler)(void);
+
+static bool erratum_a15_798181_partial(void)
+{
+	asm("mcr p15, 0, %0, c8, c3, 1" : : "r" (0));
+	dsb(ish);
+	return false;
+}
+
+static bool erratum_a15_798181_broadcast(void)
+{
+	asm("mcr p15, 0, %0, c8, c3, 1" : : "r" (0));
+	dsb(ish);
+	return true;
+}
+
+void erratum_a15_798181_init(void)
+{
+	unsigned int midr = read_cpuid_id();
+	unsigned int revidr = read_cpuid(CPUID_REVIDR);
+
+	/* Cortex-A15 r0p0..r3p2 w/o ECO fix affected */
+	if ((midr & 0xff0ffff0) != 0x410fc0f0 || midr > 0x413fc0f2 ||
+	    (revidr & 0x210) == 0x210) {
+		return;
+	}
+	if (revidr & 0x10)
+		erratum_a15_798181_handler = erratum_a15_798181_partial;
+	else
+		erratum_a15_798181_handler = erratum_a15_798181_broadcast;
+}
+#endif
+
 static void ipi_flush_tlb_a15_erratum(void *arg)
 {
 	dmb();
@@ -80,7 +114,6 @@ static void broadcast_tlb_a15_erratum(void)
 	if (!erratum_a15_798181())
 		return;
 
-	dummy_flush_tlb_a15_erratum();
 	smp_call_function(ipi_flush_tlb_a15_erratum, NULL, 1);
 }
 
@@ -92,7 +125,6 @@ static void broadcast_tlb_mm_a15_erratum(struct mm_struct *mm)
 	if (!erratum_a15_798181())
 		return;
 
-	dummy_flush_tlb_a15_erratum();
 	this_cpu = get_cpu();
 	a15_erratum_get_cpumask(this_cpu, mm, &mask);
 	smp_call_function_many(&mask, ipi_flush_tlb_a15_erratum, NULL, 1);
diff --git a/arch/arm/kernel/smp_twd.c b/arch/arm/kernel/smp_twd.c
index 2985c9f..6591e26 100644
--- a/arch/arm/kernel/smp_twd.c
+++ b/arch/arm/kernel/smp_twd.c
@@ -45,7 +45,7 @@ static void twd_set_mode(enum clock_event_mode mode,
 	case CLOCK_EVT_MODE_PERIODIC:
 		ctrl = TWD_TIMER_CONTROL_ENABLE | TWD_TIMER_CONTROL_IT_ENABLE
 			| TWD_TIMER_CONTROL_PERIODIC;
-		__raw_writel(DIV_ROUND_CLOSEST(twd_timer_rate, HZ),
+		writel_relaxed(DIV_ROUND_CLOSEST(twd_timer_rate, HZ),
 			twd_base + TWD_TIMER_LOAD);
 		break;
 	case CLOCK_EVT_MODE_ONESHOT:
@@ -58,18 +58,18 @@ static void twd_set_mode(enum clock_event_mode mode,
 		ctrl = 0;
 	}
 
-	__raw_writel(ctrl, twd_base + TWD_TIMER_CONTROL);
+	writel_relaxed(ctrl, twd_base + TWD_TIMER_CONTROL);
 }
 
 static int twd_set_next_event(unsigned long evt,
 			struct clock_event_device *unused)
 {
-	unsigned long ctrl = __raw_readl(twd_base + TWD_TIMER_CONTROL);
+	unsigned long ctrl = readl_relaxed(twd_base + TWD_TIMER_CONTROL);
 
 	ctrl |= TWD_TIMER_CONTROL_ENABLE;
 
-	__raw_writel(evt, twd_base + TWD_TIMER_COUNTER);
-	__raw_writel(ctrl, twd_base + TWD_TIMER_CONTROL);
+	writel_relaxed(evt, twd_base + TWD_TIMER_COUNTER);
+	writel_relaxed(ctrl, twd_base + TWD_TIMER_CONTROL);
 
 	return 0;
 }
@@ -82,8 +82,8 @@ static int twd_set_next_event(unsigned long evt,
  */
 static int twd_timer_ack(void)
 {
-	if (__raw_readl(twd_base + TWD_TIMER_INTSTAT)) {
-		__raw_writel(1, twd_base + TWD_TIMER_INTSTAT);
+	if (readl_relaxed(twd_base + TWD_TIMER_INTSTAT)) {
+		writel_relaxed(1, twd_base + TWD_TIMER_INTSTAT);
 		return 1;
 	}
 
@@ -211,15 +211,15 @@ static void twd_calibrate_rate(void)
 		waitjiffies += 5;
 
 				 /* enable, no interrupt or reload */
-		__raw_writel(0x1, twd_base + TWD_TIMER_CONTROL);
+		writel_relaxed(0x1, twd_base + TWD_TIMER_CONTROL);
 
 				 /* maximum value */
-		__raw_writel(0xFFFFFFFFU, twd_base + TWD_TIMER_COUNTER);
+		writel_relaxed(0xFFFFFFFFU, twd_base + TWD_TIMER_COUNTER);
 
 		while (get_jiffies_64() < waitjiffies)
 			udelay(10);
 
-		count = __raw_readl(twd_base + TWD_TIMER_COUNTER);
+		count = readl_relaxed(twd_base + TWD_TIMER_COUNTER);
 
 		twd_timer_rate = (0xFFFFFFFFU - count) * (HZ / 5);
 
@@ -277,7 +277,7 @@ static void twd_timer_setup(void)
 	 * bother with the below.
 	 */
 	if (per_cpu(percpu_setup_called, cpu)) {
-		__raw_writel(0, twd_base + TWD_TIMER_CONTROL);
+		writel_relaxed(0, twd_base + TWD_TIMER_CONTROL);
 		clockevents_register_device(clk);
 		enable_percpu_irq(clk->irq, 0);
 		return;
@@ -290,7 +290,7 @@ static void twd_timer_setup(void)
 	 * The following is done once per CPU the first time .setup() is
 	 * called.
 	 */
-	__raw_writel(0, twd_base + TWD_TIMER_CONTROL);
+	writel_relaxed(0, twd_base + TWD_TIMER_CONTROL);
 
 	clk->name = "local_timer";
 	clk->features = CLOCK_EVT_FEAT_PERIODIC | CLOCK_EVT_FEAT_ONESHOT |
diff --git a/arch/arm/kernel/suspend.c b/arch/arm/kernel/suspend.c
index 41cf3cb..2835d35 100644
--- a/arch/arm/kernel/suspend.c
+++ b/arch/arm/kernel/suspend.c
@@ -10,7 +10,7 @@
 #include <asm/suspend.h>
 #include <asm/tlbflush.h>
 
-extern int __cpu_suspend(unsigned long, int (*)(unsigned long));
+extern int __cpu_suspend(unsigned long, int (*)(unsigned long), u32 cpuid);
 extern void cpu_resume_mmu(void);
 
 #ifdef CONFIG_MMU
@@ -21,6 +21,7 @@ extern void cpu_resume_mmu(void);
 int cpu_suspend(unsigned long arg, int (*fn)(unsigned long))
 {
 	struct mm_struct *mm = current->active_mm;
+	u32 __mpidr = cpu_logical_map(smp_processor_id());
 	int ret;
 
 	if (!idmap_pgd)
@@ -32,7 +33,7 @@ int cpu_suspend(unsigned long arg, int (*fn)(unsigned long))
 	 * resume (indicated by a zero return code), we need to switch
 	 * back to the correct page tables.
 	 */
-	ret = __cpu_suspend(arg, fn);
+	ret = __cpu_suspend(arg, fn, __mpidr);
 	if (ret == 0) {
 		cpu_switch_mm(mm->pgd, mm);
 		local_flush_bp_all();
@@ -44,7 +45,8 @@ int cpu_suspend(unsigned long arg, int (*fn)(unsigned long))
 #else
 int cpu_suspend(unsigned long arg, int (*fn)(unsigned long))
 {
-	return __cpu_suspend(arg, fn);
+	u32 __mpidr = cpu_logical_map(smp_processor_id());
+	return __cpu_suspend(arg, fn, __mpidr);
 }
 #define	idmap_pgd	NULL
 #endif
diff --git a/arch/arm/kernel/traps.c b/arch/arm/kernel/traps.c
index 8fcda14..6125f25 100644
--- a/arch/arm/kernel/traps.c
+++ b/arch/arm/kernel/traps.c
@@ -34,6 +34,7 @@
 #include <asm/unwind.h>
 #include <asm/tls.h>
 #include <asm/system_misc.h>
+#include <asm/opcodes.h>
 
 static const char *handler[]= { "prefetch abort", "data abort", "address exception", "interrupt" };
 
@@ -341,15 +342,17 @@ void arm_notify_die(const char *str, struct pt_regs *regs,
 int is_valid_bugaddr(unsigned long pc)
 {
 #ifdef CONFIG_THUMB2_KERNEL
-	unsigned short bkpt;
+	u16 bkpt;
+	u16 insn = __opcode_to_mem_thumb16(BUG_INSTR_VALUE);
 #else
-	unsigned long bkpt;
+	u32 bkpt;
+	u32 insn = __opcode_to_mem_arm(BUG_INSTR_VALUE);
 #endif
 
 	if (probe_kernel_address((unsigned *)pc, bkpt))
 		return 0;
 
-	return bkpt == BUG_INSTR_VALUE;
+	return bkpt == insn;
 }
 
 #endif
@@ -402,25 +405,28 @@ asmlinkage void __exception do_undefinstr(struct pt_regs *regs)
 	if (processor_mode(regs) == SVC_MODE) {
 #ifdef CONFIG_THUMB2_KERNEL
 		if (thumb_mode(regs)) {
-			instr = ((u16 *)pc)[0];
+			instr = __mem_to_opcode_thumb16(((u16 *)pc)[0]);
 			if (is_wide_instruction(instr)) {
-				instr <<= 16;
-				instr |= ((u16 *)pc)[1];
+				u16 inst2;
+				inst2 = __mem_to_opcode_thumb16(((u16 *)pc)[1]);
+				instr = __opcode_thumb32_compose(instr, inst2);
 			}
 		} else
 #endif
-			instr = *(u32 *) pc;
+			instr = __mem_to_opcode_arm(*(u32 *) pc);
 	} else if (thumb_mode(regs)) {
 		if (get_user(instr, (u16 __user *)pc))
 			goto die_sig;
+		instr = __mem_to_opcode_thumb16(instr);
 		if (is_wide_instruction(instr)) {
 			unsigned int instr2;
 			if (get_user(instr2, (u16 __user *)pc+1))
 				goto die_sig;
-			instr <<= 16;
-			instr |= instr2;
+			instr2 = __mem_to_opcode_thumb16(instr2);
+			instr = __opcode_thumb32_compose(instr, instr2);
 		}
 	} else if (get_user(instr, (u32 __user *)pc)) {
+		instr = __mem_to_opcode_arm(instr);
 		goto die_sig;
 	}
 
diff --git a/arch/arm/kvm/arm.c b/arch/arm/kvm/arm.c
index 9c697db..aea7ccb 100644
--- a/arch/arm/kvm/arm.c
+++ b/arch/arm/kvm/arm.c
@@ -65,7 +65,7 @@ static bool vgic_present;
 static void kvm_arm_set_running_vcpu(struct kvm_vcpu *vcpu)
 {
 	BUG_ON(preemptible());
-	__get_cpu_var(kvm_arm_running_vcpu) = vcpu;
+	__this_cpu_write(kvm_arm_running_vcpu, vcpu);
 }
 
 /**
@@ -75,7 +75,7 @@ static void kvm_arm_set_running_vcpu(struct kvm_vcpu *vcpu)
 struct kvm_vcpu *kvm_arm_get_running_vcpu(void)
 {
 	BUG_ON(preemptible());
-	return __get_cpu_var(kvm_arm_running_vcpu);
+	return __this_cpu_read(kvm_arm_running_vcpu);
 }
 
 /**
@@ -815,7 +815,7 @@ static void cpu_init_hyp_mode(void *dummy)
 
 	boot_pgd_ptr = kvm_mmu_get_boot_httbr();
 	pgd_ptr = kvm_mmu_get_httbr();
-	stack_page = __get_cpu_var(kvm_arm_hyp_stack_page);
+	stack_page = __this_cpu_read(kvm_arm_hyp_stack_page);
 	hyp_stack_ptr = stack_page + PAGE_SIZE;
 	vector_ptr = (unsigned long)__kvm_hyp_vector;
 
diff --git a/arch/arm/lib/bitops.h b/arch/arm/lib/bitops.h
index d6408d1..e0c68d5 100644
--- a/arch/arm/lib/bitops.h
+++ b/arch/arm/lib/bitops.h
@@ -10,6 +10,11 @@ UNWIND(	.fnstart	)
 	and	r3, r0, #31		@ Get bit offset
 	mov	r0, r0, lsr #5
 	add	r1, r1, r0, lsl #2	@ Get word offset
+#if __LINUX_ARM_ARCH__ >= 7
+	.arch_extension	mp
+	ALT_SMP(W(pldw)	[r1])
+	ALT_UP(W(nop))
+#endif
 	mov	r3, r2, lsl r3
 1:	ldrex	r2, [r1]
 	\instr	r2, r2, r3
diff --git a/arch/arm/lib/uaccess_with_memcpy.c b/arch/arm/lib/uaccess_with_memcpy.c
index 025f742..3e58d71 100644
--- a/arch/arm/lib/uaccess_with_memcpy.c
+++ b/arch/arm/lib/uaccess_with_memcpy.c
@@ -18,6 +18,7 @@
 #include <linux/hardirq.h> /* for in_atomic() */
 #include <linux/gfp.h>
 #include <linux/highmem.h>
+#include <linux/hugetlb.h>
 #include <asm/current.h>
 #include <asm/page.h>
 
@@ -40,7 +41,35 @@ pin_page_for_write(const void __user *_addr, pte_t **ptep, spinlock_t **ptlp)
 		return 0;
 
 	pmd = pmd_offset(pud, addr);
-	if (unlikely(pmd_none(*pmd) || pmd_bad(*pmd)))
+	if (unlikely(pmd_none(*pmd)))
+		return 0;
+
+	/*
+	 * A pmd can be bad if it refers to a HugeTLB or THP page.
+	 *
+	 * Both THP and HugeTLB pages have the same pmd layout
+	 * and should not be manipulated by the pte functions.
+	 *
+	 * Lock the page table for the destination and check
+	 * to see that it's still huge and whether or not we will
+	 * need to fault on write, or if we have a splitting THP.
+	 */
+	if (unlikely(pmd_thp_or_huge(*pmd))) {
+		ptl = &current->mm->page_table_lock;
+		spin_lock(ptl);
+		if (unlikely(!pmd_thp_or_huge(*pmd)
+			|| pmd_hugewillfault(*pmd)
+			|| pmd_trans_splitting(*pmd))) {
+			spin_unlock(ptl);
+			return 0;
+		}
+
+		*ptep = NULL;
+		*ptlp = ptl;
+		return 1;
+	}
+
+	if (unlikely(pmd_bad(*pmd)))
 		return 0;
 
 	pte = pte_offset_map_lock(current->mm, pmd, addr, &ptl);
@@ -94,7 +123,10 @@ __copy_to_user_memcpy(void __user *to, const void *from, unsigned long n)
 		from += tocopy;
 		n -= tocopy;
 
-		pte_unmap_unlock(pte, ptl);
+		if (pte)
+			pte_unmap_unlock(pte, ptl);
+		else
+			spin_unlock(ptl);
 	}
 	if (!atomic)
 		up_read(&current->mm->mmap_sem);
@@ -147,7 +179,10 @@ __clear_user_memset(void __user *addr, unsigned long n)
 		addr += tocopy;
 		n -= tocopy;
 
-		pte_unmap_unlock(pte, ptl);
+		if (pte)
+			pte_unmap_unlock(pte, ptl);
+		else
+			spin_unlock(ptl);
 	}
 	up_read(&current->mm->mmap_sem);
 
diff --git a/arch/arm/mach-footbridge/netwinder-hw.c b/arch/arm/mach-footbridge/netwinder-hw.c
index 1fd2cf0..eb1fa5c 100644
--- a/arch/arm/mach-footbridge/netwinder-hw.c
+++ b/arch/arm/mach-footbridge/netwinder-hw.c
@@ -692,14 +692,14 @@ static void netwinder_led_set(struct led_classdev *cdev,
 	unsigned long flags;
 	u32 reg;
 
-	spin_lock_irqsave(&nw_gpio_lock, flags);
+	raw_spin_lock_irqsave(&nw_gpio_lock, flags);
 	reg = nw_gpio_read();
 	if (b != LED_OFF)
 		reg &= ~led->mask;
 	else
 		reg |= led->mask;
 	nw_gpio_modify_op(led->mask, reg);
-	spin_unlock_irqrestore(&nw_gpio_lock, flags);
+	raw_spin_unlock_irqrestore(&nw_gpio_lock, flags);
 }
 
 static enum led_brightness netwinder_led_get(struct led_classdev *cdev)
@@ -709,9 +709,9 @@ static enum led_brightness netwinder_led_get(struct led_classdev *cdev)
 	unsigned long flags;
 	u32 reg;
 
-	spin_lock_irqsave(&nw_gpio_lock, flags);
+	raw_spin_lock_irqsave(&nw_gpio_lock, flags);
 	reg = nw_gpio_read();
-	spin_unlock_irqrestore(&nw_gpio_lock, flags);
+	raw_spin_unlock_irqrestore(&nw_gpio_lock, flags);
 
 	return (reg & led->mask) ? LED_OFF : LED_FULL;
 }
diff --git a/arch/arm/mach-highbank/Kconfig b/arch/arm/mach-highbank/Kconfig
index fe98df4..08332d8 100644
--- a/arch/arm/mach-highbank/Kconfig
+++ b/arch/arm/mach-highbank/Kconfig
@@ -4,11 +4,12 @@ config ARCH_HIGHBANK
 	select ARCH_HAS_CPUFREQ
 	select ARCH_HAS_HOLES_MEMORYMODEL
 	select ARCH_HAS_OPP
+	select ARCH_SUPPORTS_BIG_ENDIAN
 	select ARCH_WANT_OPTIONAL_GPIOLIB
 	select ARM_AMBA
 	select ARM_ERRATA_764369
 	select ARM_ERRATA_775420
-	select ARM_ERRATA_798181
+	select ARM_ERRATA_798181 if SMP
 	select ARM_GIC
 	select ARM_PSCI
 	select ARM_TIMER_SP804
diff --git a/arch/arm/mach-ixp4xx/Kconfig b/arch/arm/mach-ixp4xx/Kconfig
index 30e1ebe..c342dc4 100644
--- a/arch/arm/mach-ixp4xx/Kconfig
+++ b/arch/arm/mach-ixp4xx/Kconfig
@@ -1,9 +1,5 @@
 if ARCH_IXP4XX
 
-config ARCH_SUPPORTS_BIG_ENDIAN
-	bool
-	default y
-
 menu "Intel IXP4xx Implementation Options"
 
 comment "IXP4xx Platforms"
diff --git a/arch/arm/mach-mvebu/Kconfig b/arch/arm/mach-mvebu/Kconfig
index 9eb63d7..5e269d7 100644
--- a/arch/arm/mach-mvebu/Kconfig
+++ b/arch/arm/mach-mvebu/Kconfig
@@ -1,5 +1,6 @@
 config ARCH_MVEBU
 	bool "Marvell SOCs with Device Tree support" if ARCH_MULTI_V7
+	select ARCH_SUPPORTS_BIG_ENDIAN
 	select CLKSRC_MMIO
 	select COMMON_CLK
 	select GENERIC_CLOCKEVENTS
diff --git a/arch/arm/mach-mvebu/coherency_ll.S b/arch/arm/mach-mvebu/coherency_ll.S
index 5476669..ee7598f 100644
--- a/arch/arm/mach-mvebu/coherency_ll.S
+++ b/arch/arm/mach-mvebu/coherency_ll.S
@@ -20,6 +20,8 @@
 #define ARMADA_XP_CFB_CTL_REG_OFFSET 0x0
 #define ARMADA_XP_CFB_CFG_REG_OFFSET 0x4
 
+#include <asm/assembler.h>
+
 	.text
 /*
  * r0: Coherency fabric base register address
@@ -29,6 +31,7 @@ ENTRY(ll_set_cpu_coherent)
 	/* Create bit by cpu index */
 	mov	r3, #(1 << 24)
 	lsl	r1, r3, r1
+ARM_BE8(rev	r1, r1)
 
 	/* Add CPU to SMP group - Atomic */
 	add	r3, r0, #ARMADA_XP_CFB_CTL_REG_OFFSET
diff --git a/arch/arm/mach-mvebu/headsmp.S b/arch/arm/mach-mvebu/headsmp.S
index 8a1b0c9..3dd80df 100644
--- a/arch/arm/mach-mvebu/headsmp.S
+++ b/arch/arm/mach-mvebu/headsmp.S
@@ -21,12 +21,16 @@
 #include <linux/linkage.h>
 #include <linux/init.h>
 
+#include <asm/assembler.h>
+
 /*
  * Armada XP specific entry point for secondary CPUs.
  * We add the CPU to the coherency fabric and then jump to secondary
  * startup
  */
 ENTRY(armada_xp_secondary_startup)
+ ARM_BE8(setend	be )			@ go BE8 if entered LE
+
 	/* Get coherency fabric base physical address */
 	adr	r0, 1f
 	ldr	r1, [r0]
diff --git a/arch/arm/mach-sa1100/assabet.c b/arch/arm/mach-sa1100/assabet.c
index e838ba2..c9808c6 100644
--- a/arch/arm/mach-sa1100/assabet.c
+++ b/arch/arm/mach-sa1100/assabet.c
@@ -512,6 +512,9 @@ static void __init assabet_map_io(void)
 	 * Its called GPCLKR0 in my SA1110 manual.
 	 */
 	Ser1SDCR0 |= SDCR0_SUS;
+	MSC1 = (MSC1 & ~0xffff) |
+		MSC_NonBrst | MSC_32BitStMem |
+		MSC_RdAcc(2) | MSC_WrAcc(2) | MSC_Rec(0);
 
 	if (!machine_has_neponset())
 		sa1100_register_uart_fns(&assabet_port_fns);
diff --git a/arch/arm/mach-sa1100/include/mach/gpio.h b/arch/arm/mach-sa1100/include/mach/gpio.h
deleted file mode 100644
index 6a9eecf..0000000
--- a/arch/arm/mach-sa1100/include/mach/gpio.h
+++ /dev/null
@@ -1,55 +0,0 @@
-/*
- * arch/arm/mach-sa1100/include/mach/gpio.h
- *
- * SA1100 GPIO wrappers for arch-neutral GPIO calls
- *
- * Written by Philipp Zabel <philipp.zabel@gmail.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- *
- */
-
-#ifndef __ASM_ARCH_SA1100_GPIO_H
-#define __ASM_ARCH_SA1100_GPIO_H
-
-#include <linux/io.h>
-#include <mach/hardware.h>
-#include <asm/irq.h>
-#include <asm-generic/gpio.h>
-
-#define __ARM_GPIOLIB_COMPLEX
-
-static inline int gpio_get_value(unsigned gpio)
-{
-	if (__builtin_constant_p(gpio) && (gpio <= GPIO_MAX))
-		return GPLR & GPIO_GPIO(gpio);
-	else
-		return __gpio_get_value(gpio);
-}
-
-static inline void gpio_set_value(unsigned gpio, int value)
-{
-	if (__builtin_constant_p(gpio) && (gpio <= GPIO_MAX))
-		if (value)
-			GPSR = GPIO_GPIO(gpio);
-		else
-			GPCR = GPIO_GPIO(gpio);
-	else
-		__gpio_set_value(gpio, value);
-}
-
-#define gpio_cansleep	__gpio_cansleep
-
-#endif
diff --git a/arch/arm/mach-sa1100/include/mach/h3xxx.h b/arch/arm/mach-sa1100/include/mach/h3xxx.h
index 7d9df16..c810620 100644
--- a/arch/arm/mach-sa1100/include/mach/h3xxx.h
+++ b/arch/arm/mach-sa1100/include/mach/h3xxx.h
@@ -13,6 +13,8 @@
 #ifndef _INCLUDE_H3XXX_H_
 #define _INCLUDE_H3XXX_H_
 
+#include "hardware.h" /* Gives GPIO_MAX */
+
 /* Physical memory regions corresponding to chip selects */
 #define H3600_EGPIO_PHYS	(SA1100_CS5_PHYS + 0x01000000)
 #define H3600_BANK_2_PHYS	SA1100_CS2_PHYS
diff --git a/arch/arm/mach-sa1100/simpad.c b/arch/arm/mach-sa1100/simpad.c
index bcbc945..41e476e 100644
--- a/arch/arm/mach-sa1100/simpad.c
+++ b/arch/arm/mach-sa1100/simpad.c
@@ -19,6 +19,7 @@
 
 #include <mach/hardware.h>
 #include <asm/setup.h>
+#include <asm/irq.h>
 
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
diff --git a/arch/arm/mach-tegra/Kconfig b/arch/arm/mach-tegra/Kconfig
index 0bf04a0..09e740f 100644
--- a/arch/arm/mach-tegra/Kconfig
+++ b/arch/arm/mach-tegra/Kconfig
@@ -51,7 +51,7 @@ config ARCH_TEGRA_3x_SOC
 
 config ARCH_TEGRA_114_SOC
 	bool "Enable support for Tegra114 family"
-	select ARM_ERRATA_798181
+	select ARM_ERRATA_798181 if SMP
 	select ARM_L1_CACHE_SHIFT_6
 	select HAVE_ARM_ARCH_TIMER
 	select PINCTRL_TEGRA114
diff --git a/arch/arm/mach-vexpress/Kconfig b/arch/arm/mach-vexpress/Kconfig
index d7e7422..cbbb81e 100644
--- a/arch/arm/mach-vexpress/Kconfig
+++ b/arch/arm/mach-vexpress/Kconfig
@@ -1,6 +1,7 @@
 config ARCH_VEXPRESS
 	bool "ARM Ltd. Versatile Express family" if ARCH_MULTI_V7
 	select ARCH_REQUIRE_GPIOLIB
+	select ARCH_SUPPORTS_BIG_ENDIAN
 	select ARM_AMBA
 	select ARM_GIC
 	select ARM_TIMER_SP804
diff --git a/arch/arm/mach-vexpress/dcscb.c b/arch/arm/mach-vexpress/dcscb.c
index 3a6384c..14d4996 100644
--- a/arch/arm/mach-vexpress/dcscb.c
+++ b/arch/arm/mach-vexpress/dcscb.c
@@ -133,38 +133,8 @@ static void dcscb_power_down(void)
 	if (last_man && __mcpm_outbound_enter_critical(cpu, cluster)) {
 		arch_spin_unlock(&dcscb_lock);
 
-		/*
-		 * Flush all cache levels for this cluster.
-		 *
-		 * To do so we do:
-		 * - Clear the SCTLR.C bit to prevent further cache allocations
-		 * - Flush the whole cache
-		 * - Clear the ACTLR "SMP" bit to disable local coherency
-		 *
-		 * Let's do it in the safest possible way i.e. with
-		 * no memory access within the following sequence
-		 * including to the stack.
-		 *
-		 * Note: fp is preserved to the stack explicitly prior doing
-		 * this since adding it to the clobber list is incompatible
-		 * with having CONFIG_FRAME_POINTER=y.
-		 */
-		asm volatile(
-		"str	fp, [sp, #-4]! \n\t"
-		"mrc	p15, 0, r0, c1, c0, 0	@ get CR \n\t"
-		"bic	r0, r0, #"__stringify(CR_C)" \n\t"
-		"mcr	p15, 0, r0, c1, c0, 0	@ set CR \n\t"
-		"isb	\n\t"
-		"bl	v7_flush_dcache_all \n\t"
-		"clrex	\n\t"
-		"mrc	p15, 0, r0, c1, c0, 1	@ get AUXCR \n\t"
-		"bic	r0, r0, #(1 << 6)	@ disable local coherency \n\t"
-		"mcr	p15, 0, r0, c1, c0, 1	@ set AUXCR \n\t"
-		"isb	\n\t"
-		"dsb	\n\t"
-		"ldr	fp, [sp], #4"
-		: : : "r0","r1","r2","r3","r4","r5","r6","r7",
-		      "r9","r10","lr","memory");
+		/* Flush all cache levels for this cluster. */
+		v7_exit_coherency_flush(all);
 
 		/*
 		 * This is a harmless no-op.  On platforms with a real
@@ -183,26 +153,8 @@ static void dcscb_power_down(void)
 	} else {
 		arch_spin_unlock(&dcscb_lock);
 
-		/*
-		 * Flush the local CPU cache.
-		 * Let's do it in the safest possible way as above.
-		 */
-		asm volatile(
-		"str	fp, [sp, #-4]! \n\t"
-		"mrc	p15, 0, r0, c1, c0, 0	@ get CR \n\t"
-		"bic	r0, r0, #"__stringify(CR_C)" \n\t"
-		"mcr	p15, 0, r0, c1, c0, 0	@ set CR \n\t"
-		"isb	\n\t"
-		"bl	v7_flush_dcache_louis \n\t"
-		"clrex	\n\t"
-		"mrc	p15, 0, r0, c1, c0, 1	@ get AUXCR \n\t"
-		"bic	r0, r0, #(1 << 6)	@ disable local coherency \n\t"
-		"mcr	p15, 0, r0, c1, c0, 1	@ set AUXCR \n\t"
-		"isb	\n\t"
-		"dsb	\n\t"
-		"ldr	fp, [sp], #4"
-		: : : "r0","r1","r2","r3","r4","r5","r6","r7",
-		      "r9","r10","lr","memory");
+		/* Disable and flush the local CPU cache. */
+		v7_exit_coherency_flush(louis);
 	}
 
 	__mcpm_cpu_down(cpu, cluster);
diff --git a/arch/arm/mach-vexpress/tc2_pm.c b/arch/arm/mach-vexpress/tc2_pm.c
index e6eb481..4eb92eb 100644
--- a/arch/arm/mach-vexpress/tc2_pm.c
+++ b/arch/arm/mach-vexpress/tc2_pm.c
@@ -156,32 +156,7 @@ static void tc2_pm_down(u64 residency)
 			: : "r" (0x400) );
 		}
 
-		/*
-		 * We need to disable and flush the whole (L1 and L2) cache.
-		 * Let's do it in the safest possible way i.e. with
-		 * no memory access within the following sequence
-		 * including the stack.
-		 *
-		 * Note: fp is preserved to the stack explicitly prior doing
-		 * this since adding it to the clobber list is incompatible
-		 * with having CONFIG_FRAME_POINTER=y.
-		 */
-		asm volatile(
-		"str	fp, [sp, #-4]! \n\t"
-		"mrc	p15, 0, r0, c1, c0, 0	@ get CR \n\t"
-		"bic	r0, r0, #"__stringify(CR_C)" \n\t"
-		"mcr	p15, 0, r0, c1, c0, 0	@ set CR \n\t"
-		"isb	\n\t"
-		"bl	v7_flush_dcache_all \n\t"
-		"clrex	\n\t"
-		"mrc	p15, 0, r0, c1, c0, 1	@ get AUXCR \n\t"
-		"bic	r0, r0, #(1 << 6)	@ disable local coherency \n\t"
-		"mcr	p15, 0, r0, c1, c0, 1	@ set AUXCR \n\t"
-		"isb	\n\t"
-		"dsb	\n\t"
-		"ldr	fp, [sp], #4"
-		: : : "r0","r1","r2","r3","r4","r5","r6","r7",
-		      "r9","r10","lr","memory");
+		v7_exit_coherency_flush(all);
 
 		cci_disable_port_by_cpu(mpidr);
 
@@ -197,26 +172,7 @@ static void tc2_pm_down(u64 residency)
 
 		arch_spin_unlock(&tc2_pm_lock);
 
-		/*
-		 * We need to disable and flush only the L1 cache.
-		 * Let's do it in the safest possible way as above.
-		 */
-		asm volatile(
-		"str	fp, [sp, #-4]! \n\t"
-		"mrc	p15, 0, r0, c1, c0, 0	@ get CR \n\t"
-		"bic	r0, r0, #"__stringify(CR_C)" \n\t"
-		"mcr	p15, 0, r0, c1, c0, 0	@ set CR \n\t"
-		"isb	\n\t"
-		"bl	v7_flush_dcache_louis \n\t"
-		"clrex	\n\t"
-		"mrc	p15, 0, r0, c1, c0, 1	@ get AUXCR \n\t"
-		"bic	r0, r0, #(1 << 6)	@ disable local coherency \n\t"
-		"mcr	p15, 0, r0, c1, c0, 1	@ set AUXCR \n\t"
-		"isb	\n\t"
-		"dsb	\n\t"
-		"ldr	fp, [sp], #4"
-		: : : "r0","r1","r2","r3","r4","r5","r6","r7",
-		      "r9","r10","lr","memory");
+		v7_exit_coherency_flush(louis);
 	}
 
 	__mcpm_cpu_down(cpu, cluster);
diff --git a/arch/arm/mm/Kconfig b/arch/arm/mm/Kconfig
index cd2c88e..1f8fed9 100644
--- a/arch/arm/mm/Kconfig
+++ b/arch/arm/mm/Kconfig
@@ -952,3 +952,9 @@ config ARCH_HAS_BARRIERS
 	help
 	  This option allows the use of custom mandatory barriers
 	  included via the mach/barriers.h file.
+
+config ARCH_SUPPORTS_BIG_ENDIAN
+	bool
+	help
+	  This option specifies the architecture can support big endian
+	  operation.
diff --git a/arch/arm/mm/abort-ev6.S b/arch/arm/mm/abort-ev6.S
index 8074199..3815a82 100644
--- a/arch/arm/mm/abort-ev6.S
+++ b/arch/arm/mm/abort-ev6.S
@@ -38,9 +38,8 @@ ENTRY(v6_early_abort)
 	bne	do_DataAbort
 	bic	r1, r1, #1 << 11		@ clear bit 11 of FSR
 	ldr	r3, [r4]			@ read aborted ARM instruction
-#ifdef CONFIG_CPU_ENDIAN_BE8
-	rev	r3, r3
-#endif
+ ARM_BE8(rev	r3, r3)
+
 	do_ldrd_abort tmp=ip, insn=r3
 	tst	r3, #1 << 20			@ L = 0 -> write
 	orreq	r1, r1, #1 << 11		@ yes.
diff --git a/arch/arm/mm/alignment.c b/arch/arm/mm/alignment.c
index 6f4585b..9240364 100644
--- a/arch/arm/mm/alignment.c
+++ b/arch/arm/mm/alignment.c
@@ -25,6 +25,7 @@
 #include <asm/cp15.h>
 #include <asm/system_info.h>
 #include <asm/unaligned.h>
+#include <asm/opcodes.h>
 
 #include "fault.h"
 
@@ -762,21 +763,25 @@ do_alignment(unsigned long addr, unsigned int fsr, struct pt_regs *regs)
 	if (thumb_mode(regs)) {
 		u16 *ptr = (u16 *)(instrptr & ~1);
 		fault = probe_kernel_address(ptr, tinstr);
+		tinstr = __mem_to_opcode_thumb16(tinstr);
 		if (!fault) {
 			if (cpu_architecture() >= CPU_ARCH_ARMv7 &&
 			    IS_T32(tinstr)) {
 				/* Thumb-2 32-bit */
 				u16 tinst2 = 0;
 				fault = probe_kernel_address(ptr + 1, tinst2);
-				instr = (tinstr << 16) | tinst2;
+				tinst2 = __mem_to_opcode_thumb16(tinst2);
+				instr = __opcode_thumb32_compose(tinstr, tinst2);
 				thumb2_32b = 1;
 			} else {
 				isize = 2;
 				instr = thumb2arm(tinstr);
 			}
 		}
-	} else
+	} else {
 		fault = probe_kernel_address(instrptr, instr);
+		instr = __mem_to_opcode_arm(instr);
+	}
 
 	if (fault) {
 		type = TYPE_FAULT;
diff --git a/arch/arm/mm/dma-mapping.c b/arch/arm/mm/dma-mapping.c
index 644d91f..79f8b39 100644
--- a/arch/arm/mm/dma-mapping.c
+++ b/arch/arm/mm/dma-mapping.c
@@ -707,7 +707,7 @@ static void *__dma_alloc(struct device *dev, size_t size, dma_addr_t *handle,
 void *arm_dma_alloc(struct device *dev, size_t size, dma_addr_t *handle,
 		    gfp_t gfp, struct dma_attrs *attrs)
 {
-	pgprot_t prot = __get_dma_pgprot(attrs, pgprot_kernel);
+	pgprot_t prot = __get_dma_pgprot(attrs, PAGE_KERNEL);
 	void *memory;
 
 	if (dma_alloc_from_coherent(dev, size, handle, &memory))
@@ -720,7 +720,7 @@ void *arm_dma_alloc(struct device *dev, size_t size, dma_addr_t *handle,
 static void *arm_coherent_dma_alloc(struct device *dev, size_t size,
 	dma_addr_t *handle, gfp_t gfp, struct dma_attrs *attrs)
 {
-	pgprot_t prot = __get_dma_pgprot(attrs, pgprot_kernel);
+	pgprot_t prot = __get_dma_pgprot(attrs, PAGE_KERNEL);
 	void *memory;
 
 	if (dma_alloc_from_coherent(dev, size, handle, &memory))
diff --git a/arch/arm/mm/extable.c b/arch/arm/mm/extable.c
index 9d28562..312e15e 100644
--- a/arch/arm/mm/extable.c
+++ b/arch/arm/mm/extable.c
@@ -9,8 +9,13 @@ int fixup_exception(struct pt_regs *regs)
 	const struct exception_table_entry *fixup;
 
 	fixup = search_exception_tables(instruction_pointer(regs));
-	if (fixup)
+	if (fixup) {
 		regs->ARM_pc = fixup->fixup;
+#ifdef CONFIG_THUMB2_KERNEL
+		/* Clear the IT state to avoid nasty surprises in the fixup */
+		regs->ARM_cpsr &= ~PSR_IT_MASK;
+#endif
+	}
 
 	return fixup != NULL;
 }
diff --git a/arch/arm/mm/idmap.c b/arch/arm/mm/idmap.c
index 83cb3ac..8e0e52e 100644
--- a/arch/arm/mm/idmap.c
+++ b/arch/arm/mm/idmap.c
@@ -10,6 +10,7 @@
 #include <asm/system_info.h>
 
 pgd_t *idmap_pgd;
+phys_addr_t (*arch_virt_to_idmap) (unsigned long x);
 
 #ifdef CONFIG_ARM_LPAE
 static void idmap_add_pmd(pud_t *pud, unsigned long addr, unsigned long end,
@@ -67,8 +68,9 @@ static void identity_mapping_add(pgd_t *pgd, const char *text_start,
 	unsigned long addr, end;
 	unsigned long next;
 
-	addr = virt_to_phys(text_start);
-	end = virt_to_phys(text_end);
+	addr = virt_to_idmap(text_start);
+	end = virt_to_idmap(text_end);
+	pr_info("Setting up static identity map for 0x%lx - 0x%lx\n", addr, end);
 
 	prot |= PMD_TYPE_SECT | PMD_SECT_AP_WRITE | PMD_SECT_AF;
 
@@ -90,8 +92,6 @@ static int __init init_static_idmap(void)
 	if (!idmap_pgd)
 		return -ENOMEM;
 
-	pr_info("Setting up static identity map for 0x%p - 0x%p\n",
-		__idmap_text_start, __idmap_text_end);
 	identity_mapping_add(idmap_pgd, __idmap_text_start,
 			     __idmap_text_end, 0);
 
diff --git a/arch/arm/mm/mmap.c b/arch/arm/mm/mmap.c
index 0c63562..d27158c3 100644
--- a/arch/arm/mm/mmap.c
+++ b/arch/arm/mm/mmap.c
@@ -202,13 +202,11 @@ int valid_phys_addr_range(phys_addr_t addr, size_t size)
 }
 
 /*
- * We don't use supersection mappings for mmap() on /dev/mem, which
- * means that we can't map the memory area above the 4G barrier into
- * userspace.
+ * Do not allow /dev/mem mappings beyond the supported physical range.
  */
 int valid_mmap_phys_addr_range(unsigned long pfn, size_t size)
 {
-	return !(pfn + (size >> PAGE_SHIFT) > 0x00100000);
+	return (pfn + (size >> PAGE_SHIFT)) <= (1 + (PHYS_MASK >> PAGE_SHIFT));
 }
 
 #ifdef CONFIG_STRICT_DEVMEM
diff --git a/arch/arm/mm/mmu.c b/arch/arm/mm/mmu.c
index b1d17ee..78eeeca 100644
--- a/arch/arm/mm/mmu.c
+++ b/arch/arm/mm/mmu.c
@@ -28,6 +28,8 @@
 #include <asm/highmem.h>
 #include <asm/system_info.h>
 #include <asm/traps.h>
+#include <asm/procinfo.h>
+#include <asm/memory.h>
 
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
@@ -1315,6 +1317,86 @@ static void __init map_lowmem(void)
 	}
 }
 
+#ifdef CONFIG_ARM_LPAE
+/*
+ * early_paging_init() recreates boot time page table setup, allowing machines
+ * to switch over to a high (>4G) address space on LPAE systems
+ */
+void __init early_paging_init(const struct machine_desc *mdesc,
+			      struct proc_info_list *procinfo)
+{
+	pmdval_t pmdprot = procinfo->__cpu_mm_mmu_flags;
+	unsigned long map_start, map_end;
+	pgd_t *pgd0, *pgdk;
+	pud_t *pud0, *pudk, *pud_start;
+	pmd_t *pmd0, *pmdk;
+	phys_addr_t phys;
+	int i;
+
+	if (!(mdesc->init_meminfo))
+		return;
+
+	/* remap kernel code and data */
+	map_start = init_mm.start_code;
+	map_end   = init_mm.brk;
+
+	/* get a handle on things... */
+	pgd0 = pgd_offset_k(0);
+	pud_start = pud0 = pud_offset(pgd0, 0);
+	pmd0 = pmd_offset(pud0, 0);
+
+	pgdk = pgd_offset_k(map_start);
+	pudk = pud_offset(pgdk, map_start);
+	pmdk = pmd_offset(pudk, map_start);
+
+	mdesc->init_meminfo();
+
+	/* Run the patch stub to update the constants */
+	fixup_pv_table(&__pv_table_begin,
+		(&__pv_table_end - &__pv_table_begin) << 2);
+
+	/*
+	 * Cache cleaning operations for self-modifying code
+	 * We should clean the entries by MVA but running a
+	 * for loop over every pv_table entry pointer would
+	 * just complicate the code.
+	 */
+	flush_cache_louis();
+	dsb();
+	isb();
+
+	/* remap level 1 table */
+	for (i = 0; i < PTRS_PER_PGD; pud0++, i++) {
+		set_pud(pud0,
+			__pud(__pa(pmd0) | PMD_TYPE_TABLE | L_PGD_SWAPPER));
+		pmd0 += PTRS_PER_PMD;
+	}
+
+	/* remap pmds for kernel mapping */
+	phys = __pa(map_start) & PMD_MASK;
+	do {
+		*pmdk++ = __pmd(phys | pmdprot);
+		phys += PMD_SIZE;
+	} while (phys < map_end);
+
+	flush_cache_all();
+	cpu_switch_mm(pgd0, &init_mm);
+	cpu_set_ttbr(1, __pa(pgd0) + TTBR1_OFFSET);
+	local_flush_bp_all();
+	local_flush_tlb_all();
+}
+
+#else
+
+void __init early_paging_init(const struct machine_desc *mdesc,
+			      struct proc_info_list *procinfo)
+{
+	if (mdesc->init_meminfo)
+		mdesc->init_meminfo();
+}
+
+#endif
+
 /*
  * paging_init() sets up the page tables, initialises the zone memory
  * maps, and sets up the zero page, bad page and bad page tables.
diff --git a/arch/arm/mm/nommu.c b/arch/arm/mm/nommu.c
index 34d4ab2..5c668b7 100644
--- a/arch/arm/mm/nommu.c
+++ b/arch/arm/mm/nommu.c
@@ -296,6 +296,15 @@ void __init sanity_check_meminfo(void)
 }
 
 /*
+ * early_paging_init() recreates boot time page table setup, allowing machines
+ * to switch over to a high (>4G) address space on LPAE systems
+ */
+void __init early_paging_init(const struct machine_desc *mdesc,
+			      struct proc_info_list *procinfo)
+{
+}
+
+/*
  * paging_init() sets up the page tables, initialises the zone memory
  * maps, and sets up the zero page, bad page and bad page tables.
  */
diff --git a/arch/arm/mm/proc-v6.S b/arch/arm/mm/proc-v6.S
index 1128064..45dc29f 100644
--- a/arch/arm/mm/proc-v6.S
+++ b/arch/arm/mm/proc-v6.S
@@ -220,9 +220,7 @@ __v6_setup:
 #endif /* CONFIG_MMU */
 	adr	r5, v6_crval
 	ldmia	r5, {r5, r6}
-#ifdef CONFIG_CPU_ENDIAN_BE8
-	orr	r6, r6, #1 << 25		@ big-endian page tables
-#endif
+ ARM_BE8(orr	r6, r6, #1 << 25)		@ big-endian page tables
 	mrc	p15, 0, r0, c1, c0, 0		@ read control register
 	bic	r0, r0, r5			@ clear bits them
 	orr	r0, r0, r6			@ set them
diff --git a/arch/arm/mm/proc-v7.S b/arch/arm/mm/proc-v7.S
index c63d9bd..60920f6 100644
--- a/arch/arm/mm/proc-v7.S
+++ b/arch/arm/mm/proc-v7.S
@@ -367,9 +367,7 @@ __v7_setup:
 #endif
 	adr	r5, v7_crval
 	ldmia	r5, {r5, r6}
-#ifdef CONFIG_CPU_ENDIAN_BE8
-	orr	r6, r6, #1 << 25		@ big-endian page tables
-#endif
+ ARM_BE8(orr	r6, r6, #1 << 25)		@ big-endian page tables
 #ifdef CONFIG_SWP_EMULATE
 	orr     r5, r5, #(1 << 10)              @ set SW bit in "clear"
 	bic     r6, r6, #(1 << 10)              @ clear it in "mmuset"
diff --git a/arch/arm/net/bpf_jit_32.c b/arch/arm/net/bpf_jit_32.c
index 99b44e0..9ed155a 100644
--- a/arch/arm/net/bpf_jit_32.c
+++ b/arch/arm/net/bpf_jit_32.c
@@ -19,6 +19,7 @@
 #include <linux/if_vlan.h>
 #include <asm/cacheflush.h>
 #include <asm/hwcap.h>
+#include <asm/opcodes.h>
 
 #include "bpf_jit_32.h"
 
@@ -113,8 +114,11 @@ static u32 jit_udiv(u32 dividend, u32 divisor)
 
 static inline void _emit(int cond, u32 inst, struct jit_ctx *ctx)
 {
+	inst |= (cond << 28);
+	inst = __opcode_to_mem_arm(inst);
+
 	if (ctx->target != NULL)
-		ctx->target[ctx->idx] = inst | (cond << 28);
+		ctx->target[ctx->idx] = inst;
 
 	ctx->idx++;
 }
diff --git a/arch/arm/plat-versatile/headsmp.S b/arch/arm/plat-versatile/headsmp.S
index 2677bc3..40f27e5 100644
--- a/arch/arm/plat-versatile/headsmp.S
+++ b/arch/arm/plat-versatile/headsmp.S
@@ -10,6 +10,7 @@
  */
 #include <linux/linkage.h>
 #include <linux/init.h>
+#include <asm/assembler.h>
 
 /*
  * Realview/Versatile Express specific entry point for secondary CPUs.
@@ -17,6 +18,7 @@
  * until we're ready for them to initialise.
  */
 ENTRY(versatile_secondary_startup)
+ ARM_BE8(setend	be)
 	mrc	p15, 0, r0, c0, c0, 5
 	bic	r0, #0xff000000
 	adr	r4, 1f
diff --git a/arch/arm/vfp/vfpmodule.c b/arch/arm/vfp/vfpmodule.c
index 52b8f40..2f37e1d 100644
--- a/arch/arm/vfp/vfpmodule.c
+++ b/arch/arm/vfp/vfpmodule.c
@@ -642,9 +642,9 @@ int vfp_restore_user_hwstate(struct user_vfp __user *ufp,
 static int vfp_hotplug(struct notifier_block *b, unsigned long action,
 	void *hcpu)
 {
-	if (action == CPU_DYING || action == CPU_DYING_FROZEN) {
-		vfp_force_reload((long)hcpu, current_thread_info());
-	} else if (action == CPU_STARTING || action == CPU_STARTING_FROZEN)
+	if (action == CPU_DYING || action == CPU_DYING_FROZEN)
+		vfp_current_hw_state[(long)hcpu] = NULL;
+	else if (action == CPU_STARTING || action == CPU_STARTING_FROZEN)
 		vfp_enable(NULL);
 	return NOTIFY_OK;
 }
author	Linus Torvalds <torvalds@linux-foundation.org>	2013-11-14 08:51:29 +0900
committer	Linus Torvalds <torvalds@linux-foundation.org>	2013-11-14 08:51:29 +0900
commit	f47671e2d861a2093179cd64dda22016664b2015 (patch)
tree	f77cb8e7d875f442e2cf0bdc8fbe478ec8ff8181 /arch/arm
parent	8ceafbfa91ffbdbb2afaea5c24ccb519ffb8b587 (diff)
parent	42cbe8271ca6562b4ad4b2e6a9895084b16eef5e (diff)
download	op-kernel-dev-f47671e2d861a2093179cd64dda22016664b2015.zip op-kernel-dev-f47671e2d861a2093179cd64dda22016664b2015.tar.gz