Merge master.kernel.org:/home/rmk/linux-2.6-arm

* master.kernel.org:/home/rmk/linux-2.6-arm: (22 commits)
  [ARM] spelling fixes
  [ARM] at91_adc parenthesis balance
  [ARM] 4400/1: S3C24XX: Add high-speed MMC device definition
  [ARM] 4399/2: S3C2443: Fix SMDK2443 nand timings
  [ARM] 4398/1: S3C2443: Fix watchdog IRQ number
  [ARM] 4397/1: S3C2443: remove SDI0/1 IRQ ambiguity
  [ARM] 4396/1: S3C2443: Add missing HCLK clocks
  [ARM] 4395/1: S3C24XX: add include of <linux/sysdev.h> to relevant machines
  [ARM] 4388/1: no need for arm/mm mmap range checks for non-mmu
  [ARM] 4387/1: fix /proc/cpuinfo formatting for pre-ARM7 parts
  [ARM] ARMv6: add CPU_HAS_ASID configuration
  [ARM] integrator: fix pci_v3 compile error with DEBUG_LL
  [ARM] gic: Fix gic cascade irq handling
  [ARM] Silence OMAP kernel configuration warning
  [ARM] Update ARM syscalls
  [ARM] 4384/1: S3C2412/13 SPI registers offset correction
  [ARM] 4383/1: iop: fix usage of '__init' and 'inline' in iop files
  [ARM] 4382/1: iop13xx: fix msi support
  [ARM] Remove Integrator/CP SMP platform support
  [ARM] 4378/1: KS8695: Serial driver fix
  ...

71 files changed, 215 insertions, 419 deletions

diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index e55bbd3..50d9f3e 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -287,6 +287,7 @@ config ARCH_IXP2000
 config ARCH_IXP4XX
 	bool "IXP4xx-based"
 	depends on MMU
+	select GENERIC_GPIO
 	select GENERIC_TIME
 	select GENERIC_CLOCKEVENTS
 	help
diff --git a/arch/arm/common/dmabounce.c b/arch/arm/common/dmabounce.c
index 6fbe772..b36b1e8 100644
--- a/arch/arm/common/dmabounce.c
+++ b/arch/arm/common/dmabounce.c
@@ -6,7 +6,7 @@
  *  copy data to/from buffers located outside the DMA region. This
  *  only works for systems in which DMA memory is at the bottom of
  *  RAM, the remainder of memory is at the top and the DMA memory
- *  can be marked as ZONE_DMA. Anything beyond that such as discontigous
+ *  can be marked as ZONE_DMA. Anything beyond that such as discontiguous
  *  DMA windows will require custom implementations that reserve memory
  *  areas at early bootup.
  *
diff --git a/arch/arm/common/gic.c b/arch/arm/common/gic.c
index 4deece5..0c89bd3 100644
--- a/arch/arm/common/gic.c
+++ b/arch/arm/common/gic.c
@@ -72,7 +72,7 @@ static inline unsigned int gic_irq(unsigned int irq)
  * unmask it, in the same way we need to unmask an interrupt when
  * we first enable it.
  *
- * The GIC has a seperate notion of "end of interrupt" to re-enable
+ * The GIC has a separate notion of "end of interrupt" to re-enable
  * an interrupt after handling, in order to support hardware
  * prioritisation.
  *
@@ -125,12 +125,11 @@ static void gic_set_cpu(unsigned int irq, cpumask_t mask_val)
 }
 #endif
 
-static void fastcall gic_handle_cascade_irq(unsigned int irq,
-					    struct irq_desc *desc)
+static void gic_handle_cascade_irq(unsigned int irq, struct irq_desc *desc)
 {
 	struct gic_chip_data *chip_data = get_irq_data(irq);
 	struct irq_chip *chip = get_irq_chip(irq);
-	unsigned int cascade_irq;
+	unsigned int cascade_irq, gic_irq;
 	unsigned long status;
 
 	/* primary controller ack'ing */
@@ -140,16 +139,15 @@ static void fastcall gic_handle_cascade_irq(unsigned int irq,
 	status = readl(chip_data->cpu_base + GIC_CPU_INTACK);
 	spin_unlock(&irq_controller_lock);
 
-	cascade_irq = (status & 0x3ff);
-	if (cascade_irq > 1020)
+	gic_irq = (status & 0x3ff);
+	if (gic_irq == 1023)
 		goto out;
-	if (cascade_irq < 32 || cascade_irq >= NR_IRQS) {
-		do_bad_IRQ(cascade_irq, desc);
-		goto out;
-	}
 
-	cascade_irq += chip_data->irq_offset;
-	generic_handle_irq(cascade_irq);
+	cascade_irq = gic_irq + chip_data->irq_offset;
+	if (unlikely(gic_irq < 32 || gic_irq > 1020 || cascade_irq >= NR_IRQS))
+		do_bad_IRQ(cascade_irq, desc);
+	else
+		generic_handle_irq(cascade_irq);
 
  out:
 	/* primary controller unmasking */
diff --git a/arch/arm/common/sharpsl_param.c b/arch/arm/common/sharpsl_param.c
index c94864c..aad4d94 100644
--- a/arch/arm/common/sharpsl_param.c
+++ b/arch/arm/common/sharpsl_param.c
@@ -20,7 +20,7 @@
  * typically including LCD parameters are loaded by the bootloader at the
  * address PARAM_BASE. As the kernel will overwrite them, we need to store
  * them early in the boot process, then pass them to the appropriate drivers.
- * Not all devices use all paramaters but the format is common to all.
+ * Not all devices use all parameters but the format is common to all.
  */
 #ifdef CONFIG_ARCH_SA1100
 #define PARAM_BASE	0xe8ffc000
diff --git a/arch/arm/common/sharpsl_pm.c b/arch/arm/common/sharpsl_pm.c
index 5972df2..3bf3a92 100644
--- a/arch/arm/common/sharpsl_pm.c
+++ b/arch/arm/common/sharpsl_pm.c
@@ -153,7 +153,7 @@ static void sharpsl_battery_thread(struct work_struct *private_)
 		sharpsl_pm.battstat.mainbat_percent = percent;
 	}
 
-	dev_dbg(sharpsl_pm.dev, "Battery: voltage: %d, status: %d, percentage: %d, time: %d\n", voltage,
+	dev_dbg(sharpsl_pm.dev, "Battery: voltage: %d, status: %d, percentage: %d, time: %ld\n", voltage,
 			sharpsl_pm.battstat.mainbat_status, sharpsl_pm.battstat.mainbat_percent, jiffies);
 
 	/* If battery is low. limit backlight intensity to save power. */
@@ -291,7 +291,7 @@ static void sharpsl_chrg_full_timer(unsigned long data)
 }
 
 /* Charging Finished Interrupt (Not present on Corgi) */
-/* Can trigger at the same time as an AC staus change so
+/* Can trigger at the same time as an AC status change so
    delay until after that has been processed */
 irqreturn_t sharpsl_chrg_full_isr(int irq, void *dev_id)
 {
@@ -625,7 +625,7 @@ static int sharpsl_fatal_check(void)
 	}
 
 	temp = get_select_val(buff);
-	dev_dbg(sharpsl_pm.dev, "sharpsl_fatal_check: acin: %d, discharge voltage: %d, no discharge: %d\n", acin, temp, sharpsl_pm.machinfo->read_devdata(SHARPSL_BATT_VOLT));
+	dev_dbg(sharpsl_pm.dev, "sharpsl_fatal_check: acin: %d, discharge voltage: %d, no discharge: %ld\n", acin, temp, sharpsl_pm.machinfo->read_devdata(SHARPSL_BATT_VOLT));
 
 	if ((acin && (temp < sharpsl_pm.machinfo->fatal_acin_volt)) ||
 			(!acin && (temp < sharpsl_pm.machinfo->fatal_noacin_volt)))
@@ -635,7 +635,7 @@ static int sharpsl_fatal_check(void)
 
 static int sharpsl_off_charge_error(void)
 {
-	dev_err(sharpsl_pm.dev, "Offline Charger: Error occured.\n");
+	dev_err(sharpsl_pm.dev, "Offline Charger: Error occurred.\n");
 	sharpsl_pm.machinfo->charge(0);
 	sharpsl_pm_led(SHARPSL_LED_ERROR);
 	sharpsl_pm.charge_mode = CHRG_ERROR;
@@ -691,14 +691,14 @@ static int sharpsl_off_charge_battery(void)
 
 		time = RCNR;
 		while(1) {
-			/* Check if any wakeup event had occured */
+			/* Check if any wakeup event had occurred */
 			if (sharpsl_pm.machinfo->charger_wakeup() != 0)
 				return 0;
 			/* Check for timeout */
 			if ((RCNR - time) > SHARPSL_WAIT_CO_TIME)
 				return 1;
 			if (sharpsl_pm.machinfo->read_devdata(SHARPSL_STATUS_CHRGFULL)) {
-				dev_dbg(sharpsl_pm.dev, "Offline Charger: Charge full occured. Retrying to check\n");
+				dev_dbg(sharpsl_pm.dev, "Offline Charger: Charge full occurred. Retrying to check\n");
 	   			sharpsl_pm.full_count++;
 				sharpsl_pm.machinfo->charge(0);
 				mdelay(SHARPSL_CHARGE_WAIT_TIME);
@@ -714,7 +714,7 @@ static int sharpsl_off_charge_battery(void)
 
 	time = RCNR;
 	while(1) {
-		/* Check if any wakeup event had occured */
+		/* Check if any wakeup event had occurred */
 		if (sharpsl_pm.machinfo->charger_wakeup() != 0)
 			return 0;
 		/* Check for timeout */
@@ -774,6 +774,8 @@ static struct pm_ops sharpsl_pm_ops = {
 
 static int __init sharpsl_pm_probe(struct platform_device *pdev)
 {
+	int ret;
+
 	if (!pdev->dev.platform_data)
 		return -EINVAL;
 
@@ -792,8 +794,10 @@ static int __init sharpsl_pm_probe(struct platform_device *pdev)
 
 	sharpsl_pm.machinfo->init();
 
-	device_create_file(&pdev->dev, &dev_attr_battery_percentage);
-	device_create_file(&pdev->dev, &dev_attr_battery_voltage);
+	ret = device_create_file(&pdev->dev, &dev_attr_battery_percentage);
+	ret |= device_create_file(&pdev->dev, &dev_attr_battery_voltage);
+	if (ret != 0)
+		dev_warn(&pdev->dev, "Failed to register attributes (%d)\n", ret);
 
 	apm_get_power_status = sharpsl_apm_get_power_status;
 
diff --git a/arch/arm/kernel/asm-offsets.c b/arch/arm/kernel/asm-offsets.c
index 3c078e3..3278e71 100644
--- a/arch/arm/kernel/asm-offsets.c
+++ b/arch/arm/kernel/asm-offsets.c
@@ -85,7 +85,7 @@ int main(void)
   DEFINE(S_OLD_R0,		offsetof(struct pt_regs, ARM_ORIG_r0));
   DEFINE(S_FRAME_SIZE,		sizeof(struct pt_regs));
   BLANK();
-#if __LINUX_ARM_ARCH__ >= 6
+#ifdef CONFIG_CPU_HAS_ASID
   DEFINE(MM_CONTEXT_ID,		offsetof(struct mm_struct, context.id));
   BLANK();
 #endif
diff --git a/arch/arm/kernel/calls.S b/arch/arm/kernel/calls.S
index ae89cdd..19326d7 100644
--- a/arch/arm/kernel/calls.S
+++ b/arch/arm/kernel/calls.S
@@ -357,6 +357,10 @@
 /* 345 */	CALL(sys_getcpu)
 		CALL(sys_ni_syscall)		/* eventually epoll_pwait */
 		CALL(sys_kexec_load)
+		CALL(sys_utimensat)
+		CALL(sys_signalfd)
+/* 350 */	CALL(sys_timerfd)
+		CALL(sys_eventfd)
 #ifndef syscalls_counted
 .equ syscalls_padding, ((NR_syscalls + 3) & ~3) - NR_syscalls
 #define syscalls_counted
diff --git a/arch/arm/kernel/setup.c b/arch/arm/kernel/setup.c
index 0453dcc..650eac1 100644
--- a/arch/arm/kernel/setup.c
+++ b/arch/arm/kernel/setup.c
@@ -918,7 +918,7 @@ static int c_show(struct seq_file *m, void *v)
 
 	if ((processor_id & 0x0008f000) == 0x00000000) {
 		/* pre-ARM7 */
-		seq_printf(m, "CPU part\t\t: %07x\n", processor_id >> 4);
+		seq_printf(m, "CPU part\t: %07x\n", processor_id >> 4);
 	} else {
 		if ((processor_id & 0x0008f000) == 0x00007000) {
 			/* ARM7 */
diff --git a/arch/arm/kernel/sys_arm.c b/arch/arm/kernel/sys_arm.c
index 3d4fcbc..1ca2d51 100644
--- a/arch/arm/kernel/sys_arm.c
+++ b/arch/arm/kernel/sys_arm.c
@@ -320,7 +320,7 @@ int kernel_execve(const char *filename, char *const argv[], char *const envp[])
 EXPORT_SYMBOL(kernel_execve);
 
 /*
- * Since loff_t is a 64 bit type we avoid a lot of ABI hastle
+ * Since loff_t is a 64 bit type we avoid a lot of ABI hassle
  * with a different argument ordering.
  */
 asmlinkage long sys_arm_fadvise64_64(int fd, int advice,
diff --git a/arch/arm/lib/bitops.h b/arch/arm/lib/bitops.h
index 5422510..2e787d4 100644
--- a/arch/arm/lib/bitops.h
+++ b/arch/arm/lib/bitops.h
@@ -47,7 +47,7 @@
  * @store: store instruction
  *
  * Note: we can trivially conditionalise the store instruction
- * to avoid dirting the data cache.
+ * to avoid dirtying the data cache.
  */
 	.macro	testop, instr, store
 	add	r1, r1, r0, lsr #3
diff --git a/arch/arm/mach-at91/board-carmeva.c b/arch/arm/mach-at91/board-carmeva.c
index b451861..76ec856 100644
--- a/arch/arm/mach-at91/board-carmeva.c
+++ b/arch/arm/mach-at91/board-carmeva.c
@@ -79,7 +79,7 @@ static struct at91_udc_data __initdata carmeva_udc_data = {
 	.pullup_pin	= AT91_PIN_PD9,
 };
 
-/* FIXME: user dependend */
+/* FIXME: user dependant */
 // static struct at91_cf_data __initdata carmeva_cf_data = {
 //	.det_pin	= AT91_PIN_PB0,
 //	.rst_pin	= AT91_PIN_PC5,
@@ -100,17 +100,17 @@ static struct spi_board_info carmeva_spi_devices[] = {
 		.chip_select  = 0,
 		.max_speed_hz = 10 * 1000 * 1000,
 	},
-	{ /* User accessable spi - cs1 (250KHz) */
+	{ /* User accessible spi - cs1 (250KHz) */
 		.modalias = "spi-cs1",
 		.chip_select  = 1,
 		.max_speed_hz = 250 *  1000,
 	},
-	{ /* User accessable spi - cs2 (1MHz) */
+	{ /* User accessible spi - cs2 (1MHz) */
 		.modalias = "spi-cs2",
 		.chip_select  = 2,
 		.max_speed_hz = 1 * 1000 *  1000,
 	},
-	{ /* User accessable spi - cs3 (10MHz) */
+	{ /* User accessible spi - cs3 (10MHz) */
 		.modalias = "spi-cs3",
 		.chip_select  = 3,
 		.max_speed_hz = 10 * 1000 *  1000,
diff --git a/arch/arm/mach-h720x/cpu-h7202.c b/arch/arm/mach-h720x/cpu-h7202.c
index 82e420d..0a1a25f 100644
--- a/arch/arm/mach-h720x/cpu-h7202.c
+++ b/arch/arm/mach-h720x/cpu-h7202.c
@@ -143,7 +143,7 @@ h7202_timer_interrupt(int irq, void *dev_id)
 }
 
 /*
- * mask multiplexed timer irq's
+ * mask multiplexed timer IRQs
  */
 static void inline mask_timerx_irq (u32 irq)
 {
@@ -153,7 +153,7 @@ static void inline mask_timerx_irq (u32 irq)
 }
 
 /*
- * unmask multiplexed timer irq's
+ * unmask multiplexed timer IRQs
  */
 static void inline unmask_timerx_irq (u32 irq)
 {
diff --git a/arch/arm/mach-imx/cpufreq.c b/arch/arm/mach-imx/cpufreq.c
index 7e70e0b..467d899 100644
--- a/arch/arm/mach-imx/cpufreq.c
+++ b/arch/arm/mach-imx/cpufreq.c
@@ -245,7 +245,7 @@ static int imx_set_target(struct cpufreq_policy *policy,
 	if(mpctl0) {
 		CSCR |= CSCR_MPLL_RESTART;
 
-		/* Wait until MPLL is stablized */
+		/* Wait until MPLL is stabilized */
 		while( CSCR & CSCR_MPLL_RESTART );
 
 		imx_set_async_mode();
diff --git a/arch/arm/mach-imx/dma.c b/arch/arm/mach-imx/dma.c
index 6d50d85..bc6fb02 100644
--- a/arch/arm/mach-imx/dma.c
+++ b/arch/arm/mach-imx/dma.c
@@ -131,7 +131,7 @@ imx_dma_setup_sg_base(imx_dmach_t dma_ch,
  * The function setups DMA channel source and destination addresses for transfer
  * specified by provided parameters. The scatter-gather emulation is disabled,
  * because linear data block
- * form the physical address range is transfered.
+ * form the physical address range is transferred.
  * Return value: if incorrect parameters are provided -%EINVAL.
  *		Zero indicates success.
  */
@@ -192,7 +192,7 @@ imx_dma_setup_single(imx_dmach_t dma_ch, dma_addr_t dma_address,
  * @dmamode: DMA transfer mode, %DMA_MODE_READ from the device to the memory
  *           or %DMA_MODE_WRITE from memory to the device
  *
- * The function setups DMA channel state and registers to be ready for transfer
+ * The function sets up DMA channel state and registers to be ready for transfer
  * specified by provided parameters. The scatter-gather emulation is set up
  * according to the parameters.
  *
@@ -212,7 +212,7 @@ imx_dma_setup_single(imx_dmach_t dma_ch, dma_addr_t dma_address,
  *
  * %CCR_SMOD_LINEAR | %CCR_SSIZ_32 | %CCR_DMOD_FIFO | %CCR_DSIZ_x
  *
- * Be carefull there and do not mistakenly mix source and target device
+ * Be careful here and do not mistakenly mix source and target device
  * port sizes constants, they are really different:
  * %CCR_SSIZ_8, %CCR_SSIZ_16, %CCR_SSIZ_32,
  * %CCR_DSIZ_8, %CCR_DSIZ_16, %CCR_DSIZ_32
@@ -495,7 +495,7 @@ static irqreturn_t dma_err_handler(int irq, void *dev_id)
 		/*
 		 * The cleaning of @sg field would be questionable
 		 * there, because its value can help to compute
-		 * remaining/transfered bytes count in the handler
+		 * remaining/transferred bytes count in the handler
 		 */
 		/*imx_dma_channels[i].sg = NULL;*/
 
diff --git a/arch/arm/mach-integrator/Makefile b/arch/arm/mach-integrator/Makefile
index ebb255b..158daaf 100644
--- a/arch/arm/mach-integrator/Makefile
+++ b/arch/arm/mach-integrator/Makefile
@@ -12,4 +12,3 @@ obj-$(CONFIG_LEDS)			+= leds.o
 obj-$(CONFIG_PCI)			+= pci_v3.o pci.o
 obj-$(CONFIG_CPU_FREQ_INTEGRATOR)	+= cpu.o
 obj-$(CONFIG_INTEGRATOR_IMPD1)		+= impd1.o
-obj-$(CONFIG_SMP)			+= platsmp.o headsmp.o
diff --git a/arch/arm/mach-integrator/core.c b/arch/arm/mach-integrator/core.c
index 897c21c..e9c82de 100644
--- a/arch/arm/mach-integrator/core.c
+++ b/arch/arm/mach-integrator/core.c
@@ -257,23 +257,7 @@ integrator_timer_interrupt(int irq, void *dev_id)
 	 */
 	writel(1, TIMER1_VA_BASE + TIMER_INTCLR);
 
-	/*
-	 * the clock tick routines are only processed on the
-	 * primary CPU
-	 */
-	if (hard_smp_processor_id() == 0) {
-		timer_tick();
-#ifdef CONFIG_SMP
-		smp_send_timer();
-#endif
-	}
-
-#ifdef CONFIG_SMP
-	/*
-	 * this is the ARM equivalent of the APIC timer interrupt
-	 */
-	update_process_times(user_mode(get_irq_regs()));
-#endif /* CONFIG_SMP */
+	timer_tick();
 
 	write_sequnlock(&xtime_lock);
 
diff --git a/arch/arm/mach-integrator/headsmp.S b/arch/arm/mach-integrator/headsmp.S
deleted file mode 100644
index ceaa88e..0000000
--- a/arch/arm/mach-integrator/headsmp.S
+++ /dev/null
@@ -1,37 +0,0 @@
-/*
- *  linux/arch/arm/mach-integrator/headsmp.S
- *
- *  Copyright (c) 2003 ARM Limited
- *  All Rights Reserved
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-#include <linux/linkage.h>
-#include <linux/init.h>
-
-	__INIT
-
-/*
- * Integrator specific entry point for secondary CPUs.  This provides
- * a "holding pen" into which all secondary cores are held until we're
- * ready for them to initialise.
- */
-ENTRY(integrator_secondary_startup)
-	adr	r4, 1f
-	ldmia	r4, {r5, r6}
-	sub	r4, r4, r5
-	ldr	r6, [r6, r4]
-pen:	ldr	r7, [r6]
-	cmp	r7, r0
-	bne	pen
-
-	/*
-	 * we've been released from the holding pen: secondary_stack
-	 * should now contain the SVC stack for this core
-	 */
-	b	secondary_startup
-
-1:	.long	.
-	.long	phys_pen_release
diff --git a/arch/arm/mach-integrator/pci_v3.c b/arch/arm/mach-integrator/pci_v3.c
index af9ebcc..d4d8134 100644
--- a/arch/arm/mach-integrator/pci_v3.c
+++ b/arch/arm/mach-integrator/pci_v3.c
@@ -33,6 +33,7 @@
 #include <asm/irq.h>
 #include <asm/system.h>
 #include <asm/mach/pci.h>
+#include <asm/irq_regs.h>
 
 #include <asm/hardware/pci_v3.h>
 
diff --git a/arch/arm/mach-integrator/platsmp.c b/arch/arm/mach-integrator/platsmp.c
deleted file mode 100644
index 613b841..0000000
--- a/arch/arm/mach-integrator/platsmp.c
+++ /dev/null
@@ -1,204 +0,0 @@
-/*
- *  linux/arch/arm/mach-cintegrator/platsmp.c
- *
- *  Copyright (C) 2002 ARM Ltd.
- *  All Rights Reserved
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-#include <linux/init.h>
-#include <linux/kernel.h>
-#include <linux/sched.h>
-#include <linux/errno.h>
-#include <linux/mm.h>
-
-#include <asm/atomic.h>
-#include <asm/cacheflush.h>
-#include <asm/delay.h>
-#include <asm/mmu_context.h>
-#include <asm/ptrace.h>
-#include <asm/smp.h>
-
-extern void integrator_secondary_startup(void);
-
-/*
- * control for which core is the next to come out of the secondary
- * boot "holding pen"
- */
-volatile int __cpuinitdata pen_release = -1;
-unsigned long __cpuinitdata phys_pen_release = 0;
-
-static DEFINE_SPINLOCK(boot_lock);
-
-void __cpuinit platform_secondary_init(unsigned int cpu)
-{
-	/*
-	 * the primary core may have used a "cross call" soft interrupt
-	 * to get this processor out of WFI in the BootMonitor - make
-	 * sure that we are no longer being sent this soft interrupt
-	 */
-	smp_cross_call_done(cpumask_of_cpu(cpu));
-
-	/*
-	 * if any interrupts are already enabled for the primary
-	 * core (e.g. timer irq), then they will not have been enabled
-	 * for us: do so
-	 */
-	secondary_scan_irqs();
-
-	/*
-	 * let the primary processor know we're out of the
-	 * pen, then head off into the C entry point
-	 */
-	pen_release = -1;
-
-	/*
-	 * Synchronise with the boot thread.
-	 */
-	spin_lock(&boot_lock);
-	spin_unlock(&boot_lock);
-}
-
-int __cpuinit boot_secondary(unsigned int cpu, struct task_struct *idle)
-{
-	unsigned long timeout;
-
-	/*
-	 * set synchronisation state between this boot processor
-	 * and the secondary one
-	 */
-	spin_lock(&boot_lock);
-
-	/*
-	 * The secondary processor is waiting to be released from
-	 * the holding pen - release it, then wait for it to flag
-	 * that it has been released by resetting pen_release.
-	 *
-	 * Note that "pen_release" is the hardware CPU ID, whereas
-	 * "cpu" is Linux's internal ID.
-	 */
-	pen_release = cpu;
-	flush_cache_all();
-
-	/*
-	 * XXX
-	 *
-	 * This is a later addition to the booting protocol: the
-	 * bootMonitor now puts secondary cores into WFI, so
-	 * poke_milo() no longer gets the cores moving; we need
-	 * to send a soft interrupt to wake the secondary core.
-	 * Use smp_cross_call() for this, since there's little
-	 * point duplicating the code here
-	 */
-	smp_cross_call(cpumask_of_cpu(cpu));
-
-	timeout = jiffies + (1 * HZ);
-	while (time_before(jiffies, timeout)) {
-		if (pen_release == -1)
-			break;
-
-		udelay(10);
-	}
-
-	/*
-	 * now the secondary core is starting up let it run its
-	 * calibrations, then wait for it to finish
-	 */
-	spin_unlock(&boot_lock);
-
-	return pen_release != -1 ? -ENOSYS : 0;
-}
-
-static void __init poke_milo(void)
-{
-	extern void secondary_startup(void);
-
-	/* nobody is to be released from the pen yet */
-	pen_release = -1;
-
-	phys_pen_release = virt_to_phys(&pen_release);
-
-	/*
-	 * write the address of secondary startup into the system-wide
-	 * flags register, then clear the bottom two bits, which is what
-	 * BootMonitor is waiting for
-	 */
-#if 1
-#define CINTEGRATOR_HDR_FLAGSS_OFFSET 0x30
-	__raw_writel(virt_to_phys(integrator_secondary_startup),
-		     (IO_ADDRESS(INTEGRATOR_HDR_BASE) +
-		      CINTEGRATOR_HDR_FLAGSS_OFFSET));
-#define CINTEGRATOR_HDR_FLAGSC_OFFSET 0x34
-	__raw_writel(3,
-		     (IO_ADDRESS(INTEGRATOR_HDR_BASE) +
-		      CINTEGRATOR_HDR_FLAGSC_OFFSET));
-#endif
-
-	mb();
-}
-
-/*
- * Initialise the CPU possible map early - this describes the CPUs
- * which may be present or become present in the system.
- */
-void __init smp_init_cpus(void)
-{
-	unsigned int i, ncores = get_core_count();
-
-	for (i = 0; i < ncores; i++)
-		cpu_set(i, cpu_possible_map);
-}
-
-void __init smp_prepare_cpus(unsigned int max_cpus)
-{
-	unsigned int ncores = get_core_count();
-	unsigned int cpu = smp_processor_id();
-	int i;
-
-	/* sanity check */
-	if (ncores == 0) {
-		printk(KERN_ERR
-		       "Integrator/CP: strange CM count of 0? Default to 1\n");
-
-		ncores = 1;
-	}
-
-	if (ncores > NR_CPUS) {
-		printk(KERN_WARNING
-		       "Integrator/CP: no. of cores (%d) greater than configured "
-		       "maximum of %d - clipping\n",
-		       ncores, NR_CPUS);
-		ncores = NR_CPUS;
-	}
-
-	/*
-	 * start with some more config for the Boot CPU, now that
-	 * the world is a bit more alive (which was not the case
-	 * when smp_prepare_boot_cpu() was called)
-	 */
-	smp_store_cpu_info(cpu);
-
-	/*
-	 * are we trying to boot more cores than exist?
-	 */
-	if (max_cpus > ncores)
-		max_cpus = ncores;
-
-	/*
-	 * Initialise the present map, which describes the set of CPUs
-	 * actually populated at the present time.
-	 */
-	for (i = 0; i < max_cpus; i++)
-		cpu_set(i, cpu_present_map);
-
-	/*
-	 * Do we need any more CPUs? If so, then let them know where
-	 * to start. Note that, on modern versions of MILO, the "poke"
-	 * doesn't actually do anything until each individual core is
-	 * sent a soft interrupt to get it out of WFI
-	 */
-	if (max_cpus > 1)
-		poke_milo();
-}
diff --git a/arch/arm/mach-iop13xx/irq.c b/arch/arm/mach-iop13xx/irq.c
index 5791add..69f07b2 100644
--- a/arch/arm/mach-iop13xx/irq.c
+++ b/arch/arm/mach-iop13xx/irq.c
@@ -30,77 +30,65 @@
 
 /* INTCTL0 CP6 R0 Page 4
  */
-static inline u32 read_intctl_0(void)
+static u32 read_intctl_0(void)
 {
 	u32 val;
 	asm volatile("mrc p6, 0, %0, c0, c4, 0":"=r" (val));
 	return val;
 }
-static inline void write_intctl_0(u32 val)
+static void write_intctl_0(u32 val)
 {
 	asm volatile("mcr p6, 0, %0, c0, c4, 0"::"r" (val));
 }
 
 /* INTCTL1 CP6 R1 Page 4
  */
-static inline u32 read_intctl_1(void)
+static u32 read_intctl_1(void)
 {
 	u32 val;
 	asm volatile("mrc p6, 0, %0, c1, c4, 0":"=r" (val));
 	return val;
 }
-static inline void write_intctl_1(u32 val)
+static void write_intctl_1(u32 val)
 {
 	asm volatile("mcr p6, 0, %0, c1, c4, 0"::"r" (val));
 }
 
 /* INTCTL2 CP6 R2 Page 4
  */
-static inline u32 read_intctl_2(void)
+static u32 read_intctl_2(void)
 {
 	u32 val;
 	asm volatile("mrc p6, 0, %0, c2, c4, 0":"=r" (val));
 	return val;
 }
-static inline void write_intctl_2(u32 val)
+static void write_intctl_2(u32 val)
 {
 	asm volatile("mcr p6, 0, %0, c2, c4, 0"::"r" (val));
 }
 
 /* INTCTL3 CP6 R3 Page 4
  */
-static inline u32 read_intctl_3(void)
+static u32 read_intctl_3(void)
 {
 	u32 val;
 	asm volatile("mrc p6, 0, %0, c3, c4, 0":"=r" (val));
 	return val;
 }
-static inline void write_intctl_3(u32 val)
+static void write_intctl_3(u32 val)
 {
 	asm volatile("mcr p6, 0, %0, c3, c4, 0"::"r" (val));
 }
 
 /* INTSTR0 CP6 R0 Page 5
  */
-static inline u32 read_intstr_0(void)
-{
-	u32 val;
-	asm volatile("mrc p6, 0, %0, c0, c5, 0":"=r" (val));
-	return val;
-}
-static inline void write_intstr_0(u32 val)
+static void write_intstr_0(u32 val)
 {
 	asm volatile("mcr p6, 0, %0, c0, c5, 0"::"r" (val));
 }
 
 /* INTSTR1 CP6 R1 Page 5
  */
-static inline u32 read_intstr_1(void)
-{
-	u32 val;
-	asm volatile("mrc p6, 0, %0, c1, c5, 0":"=r" (val));
-	return val;
-}
 static void write_intstr_1(u32 val)
 {
 	asm volatile("mcr p6, 0, %0, c1, c5, 0"::"r" (val));
@@ -108,12 +96,6 @@ static void write_intstr_1(u32 val)
 
 /* INTSTR2 CP6 R2 Page 5
  */
-static inline u32 read_intstr_2(void)
-{
-	u32 val;
-	asm volatile("mrc p6, 0, %0, c2, c5, 0":"=r" (val));
-	return val;
-}
 static void write_intstr_2(u32 val)
 {
 	asm volatile("mcr p6, 0, %0, c2, c5, 0"::"r" (val));
@@ -121,12 +103,6 @@ static void write_intstr_2(u32 val)
 
 /* INTSTR3 CP6 R3 Page 5
  */
-static inline u32 read_intstr_3(void)
-{
-	u32 val;
-	asm volatile("mrc p6, 0, %0, c3, c5, 0":"=r" (val));
-	return val;
-}
 static void write_intstr_3(u32 val)
 {
 	asm volatile("mcr p6, 0, %0, c3, c5, 0"::"r" (val));
@@ -134,12 +110,6 @@ static void write_intstr_3(u32 val)
 
 /* INTBASE CP6 R0 Page 2
  */
-static inline u32 read_intbase(void)
-{
-	u32 val;
-	asm volatile("mrc p6, 0, %0, c0, c2, 0":"=r" (val));
-	return val;
-}
 static void write_intbase(u32 val)
 {
 	asm volatile("mcr p6, 0, %0, c0, c2, 0"::"r" (val));
@@ -147,12 +117,6 @@ static void write_intbase(u32 val)
 
 /* INTSIZE CP6 R2 Page 2
  */
-static inline u32 read_intsize(void)
-{
-	u32 val;
-	asm volatile("mrc p6, 0, %0, c2, c2, 0":"=r" (val));
-	return val;
-}
 static void write_intsize(u32 val)
 {
 	asm volatile("mcr p6, 0, %0, c2, c2, 0"::"r" (val));
diff --git a/arch/arm/mach-iop13xx/msi.c b/arch/arm/mach-iop13xx/msi.c
index 2d23693..63ef1124c 100644
--- a/arch/arm/mach-iop13xx/msi.c
+++ b/arch/arm/mach-iop13xx/msi.c
@@ -30,52 +30,52 @@ static DECLARE_BITMAP(msi_irq_in_use, IOP13XX_NUM_MSI_IRQS);
 
 /* IMIPR0 CP6 R8 Page 1
  */
-static inline u32 read_imipr_0(void)
+static u32 read_imipr_0(void)
 {
 	u32 val;
 	asm volatile("mrc p6, 0, %0, c8, c1, 0":"=r" (val));
 	return val;
 }
-static inline void write_imipr_0(u32 val)
+static void write_imipr_0(u32 val)
 {
 	asm volatile("mcr p6, 0, %0, c8, c1, 0"::"r" (val));
 }
 
 /* IMIPR1 CP6 R9 Page 1
  */
-static inline u32 read_imipr_1(void)
+static u32 read_imipr_1(void)
 {
 	u32 val;
 	asm volatile("mrc p6, 0, %0, c9, c1, 0":"=r" (val));
 	return val;
 }
-static inline void write_imipr_1(u32 val)
+static void write_imipr_1(u32 val)
 {
 	asm volatile("mcr p6, 0, %0, c9, c1, 0"::"r" (val));
 }
 
 /* IMIPR2 CP6 R10 Page 1
  */
-static inline u32 read_imipr_2(void)
+static u32 read_imipr_2(void)
 {
 	u32 val;
 	asm volatile("mrc p6, 0, %0, c10, c1, 0":"=r" (val));
 	return val;
 }
-static inline void write_imipr_2(u32 val)
+static void write_imipr_2(u32 val)
 {
 	asm volatile("mcr p6, 0, %0, c10, c1, 0"::"r" (val));
 }
 
 /* IMIPR3 CP6 R11 Page 1
  */
-static inline u32 read_imipr_3(void)
+static u32 read_imipr_3(void)
 {
 	u32 val;
 	asm volatile("mrc p6, 0, %0, c11, c1, 0":"=r" (val));
 	return val;
 }
-static inline void write_imipr_3(u32 val)
+static void write_imipr_3(u32 val)
 {
 	asm volatile("mcr p6, 0, %0, c11, c1, 0"::"r" (val));
 }
@@ -190,5 +190,5 @@ int arch_setup_msi_irq(struct pci_dev *pdev, struct msi_desc *desc)
 	write_msi_msg(irq, &msg);
 	set_irq_chip_and_handler(irq, &iop13xx_msi_chip, handle_simple_irq);
 
-	return irq;
+	return 0;
 }
diff --git a/arch/arm/mach-iop13xx/pci.c b/arch/arm/mach-iop13xx/pci.c
index 6baeb26c..9d63d7f 100644
--- a/arch/arm/mach-iop13xx/pci.c
+++ b/arch/arm/mach-iop13xx/pci.c
@@ -145,7 +145,7 @@ void iop13xx_map_pci_memory(void)
 	}
 }
 
-static inline int iop13xx_atu_function(int atu)
+static int iop13xx_atu_function(int atu)
 {
 	int func = 0;
 	/* the function number depends on the value of the
@@ -260,7 +260,7 @@ static int iop13xx_atux_pci_status(int clear)
  * data.  Note that the data dependency on %0 encourages an abort
  * to be detected before we return.
  */
-static inline u32 iop13xx_atux_read(unsigned long addr)
+static u32 iop13xx_atux_read(unsigned long addr)
 {
 	u32 val;
 
@@ -388,7 +388,7 @@ static int iop13xx_atue_pci_status(int clear)
 	return err;
 }
 
-static inline int __init
+static int
 iop13xx_pcie_map_irq(struct pci_dev *dev, u8 idsel, u8 pin)
 {
 	WARN_ON(idsel != 0);
@@ -402,7 +402,7 @@ iop13xx_pcie_map_irq(struct pci_dev *dev, u8 idsel, u8 pin)
 	}
 }
 
-static inline u32 iop13xx_atue_read(unsigned long addr)
+static u32 iop13xx_atue_read(unsigned long addr)
 {
 	u32 val;
 
@@ -990,7 +990,7 @@ void __init iop13xx_pci_init(void)
 			"imprecise external abort");
 }
 
-/* intialize the pci memory space.  handle any combination of
+/* initialize the pci memory space.  handle any combination of
  * atue and atux enabled/disabled
  */
 int iop13xx_pci_setup(int nr, struct pci_sys_data *sys)
diff --git a/arch/arm/mach-iop32x/glantank.c b/arch/arm/mach-iop32x/glantank.c
index 45f4f13..5776fd8 100644
--- a/arch/arm/mach-iop32x/glantank.c
+++ b/arch/arm/mach-iop32x/glantank.c
@@ -75,7 +75,7 @@ void __init glantank_map_io(void)
 #define INTC	IRQ_IOP32X_XINT2
 #define INTD	IRQ_IOP32X_XINT3
 
-static inline int __init
+static int __init
 glantank_pci_map_irq(struct pci_dev *dev, u8 slot, u8 pin)
 {
 	static int pci_irq_table[][4] = {
diff --git a/arch/arm/mach-iop32x/iq31244.c b/arch/arm/mach-iop32x/iq31244.c
index 7b21c6e..d4eefbe 100644
--- a/arch/arm/mach-iop32x/iq31244.c
+++ b/arch/arm/mach-iop32x/iq31244.c
@@ -104,7 +104,7 @@ void __init iq31244_map_io(void)
 /*
  * EP80219/IQ31244 PCI.
  */
-static inline int __init
+static int __init
 ep80219_pci_map_irq(struct pci_dev *dev, u8 slot, u8 pin)
 {
 	int irq;
@@ -140,7 +140,7 @@ static struct hw_pci ep80219_pci __initdata = {
 	.map_irq	= ep80219_pci_map_irq,
 };
 
-static inline int __init
+static int __init
 iq31244_pci_map_irq(struct pci_dev *dev, u8 slot, u8 pin)
 {
 	int irq;
diff --git a/arch/arm/mach-iop32x/iq80321.c b/arch/arm/mach-iop32x/iq80321.c
index bc25fb9..8d9f4916 100644
--- a/arch/arm/mach-iop32x/iq80321.c
+++ b/arch/arm/mach-iop32x/iq80321.c
@@ -72,7 +72,7 @@ void __init iq80321_map_io(void)
 /*
  * IQ80321 PCI.
  */
-static inline int __init
+static int __init
 iq80321_pci_map_irq(struct pci_dev *dev, u8 slot, u8 pin)
 {
 	int irq;
diff --git a/arch/arm/mach-iop32x/irq.c b/arch/arm/mach-iop32x/irq.c
index 82598dc1..c971171 100644
--- a/arch/arm/mach-iop32x/irq.c
+++ b/arch/arm/mach-iop32x/irq.c
@@ -21,12 +21,12 @@
 
 static u32 iop32x_mask;
 
-static inline void intctl_write(u32 val)
+static void intctl_write(u32 val)
 {
 	asm volatile("mcr p6, 0, %0, c0, c0, 0" : : "r" (val));
 }
 
-static inline void intstr_write(u32 val)
+static void intstr_write(u32 val)
 {
 	asm volatile("mcr p6, 0, %0, c4, c0, 0" : : "r" (val));
 }
diff --git a/arch/arm/mach-iop32x/n2100.c b/arch/arm/mach-iop32x/n2100.c
index 5f07344..d55005d 100644
--- a/arch/arm/mach-iop32x/n2100.c
+++ b/arch/arm/mach-iop32x/n2100.c
@@ -76,7 +76,7 @@ void __init n2100_map_io(void)
 /*
  * N2100 PCI.
  */
-static inline int __init
+static int __init
 n2100_pci_map_irq(struct pci_dev *dev, u8 slot, u8 pin)
 {
 	int irq;
diff --git a/arch/arm/mach-iop33x/iq80331.c b/arch/arm/mach-iop33x/iq80331.c
index 376c932..2b06318 100644
--- a/arch/arm/mach-iop33x/iq80331.c
+++ b/arch/arm/mach-iop33x/iq80331.c
@@ -55,7 +55,7 @@ static struct sys_timer iq80331_timer = {
 /*
  * IQ80331 PCI.
  */
-static inline int __init
+static int __init
 iq80331_pci_map_irq(struct pci_dev *dev, u8 slot, u8 pin)
 {
 	int irq;
diff --git a/arch/arm/mach-iop33x/iq80332.c b/arch/arm/mach-iop33x/iq80332.c
index 58c8149..7889ce3 100644
--- a/arch/arm/mach-iop33x/iq80332.c
+++ b/arch/arm/mach-iop33x/iq80332.c
@@ -55,7 +55,7 @@ static struct sys_timer iq80332_timer = {
 /*
  * IQ80332 PCI.
  */
-static inline int __init
+static int __init
 iq80332_pci_map_irq(struct pci_dev *dev, u8 slot, u8 pin)
 {
 	int irq;
diff --git a/arch/arm/mach-iop33x/irq.c b/arch/arm/mach-iop33x/irq.c
index c65ea78..f09dd05 100644
--- a/arch/arm/mach-iop33x/irq.c
+++ b/arch/arm/mach-iop33x/irq.c
@@ -22,32 +22,32 @@
 static u32 iop33x_mask0;
 static u32 iop33x_mask1;
 
-static inline void intctl0_write(u32 val)
+static void intctl0_write(u32 val)
 {
 	asm volatile("mcr p6, 0, %0, c0, c0, 0" : : "r" (val));
 }
 
-static inline void intctl1_write(u32 val)
+static void intctl1_write(u32 val)
 {
 	asm volatile("mcr p6, 0, %0, c1, c0, 0" : : "r" (val));
 }
 
-static inline void intstr0_write(u32 val)
+static void intstr0_write(u32 val)
 {
 	asm volatile("mcr p6, 0, %0, c2, c0, 0" : : "r" (val));
 }
 
-static inline void intstr1_write(u32 val)
+static void intstr1_write(u32 val)
 {
 	asm volatile("mcr p6, 0, %0, c3, c0, 0" : : "r" (val));
 }
 
-static inline void intbase_write(u32 val)
+static void intbase_write(u32 val)
 {
 	asm volatile("mcr p6, 0, %0, c12, c0, 0" : : "r" (val));
 }
 
-static inline void intsize_write(u32 val)
+static void intsize_write(u32 val)
 {
 	asm volatile("mcr p6, 0, %0, c13, c0, 0" : : "r" (val));
 }
diff --git a/arch/arm/mach-ixp2000/enp2611.c b/arch/arm/mach-ixp2000/enp2611.c
index 500e997..9c49435 100644
--- a/arch/arm/mach-ixp2000/enp2611.c
+++ b/arch/arm/mach-ixp2000/enp2611.c
@@ -198,7 +198,7 @@ subsys_initcall(enp2611_pci_init);
 
 
 /*************************************************************************
- * ENP-2611 Machine Intialization
+ * ENP-2611 Machine Initialization
  *************************************************************************/
 static struct flash_platform_data enp2611_flash_platform_data = {
 	.map_name	= "cfi_probe",
diff --git a/arch/arm/mach-ixp2000/ixdp2x00.c b/arch/arm/mach-ixp2000/ixdp2x00.c
index 52b368b..011065b 100644
--- a/arch/arm/mach-ixp2000/ixdp2x00.c
+++ b/arch/arm/mach-ixp2000/ixdp2x00.c
@@ -195,7 +195,7 @@ void __init ixdp2x00_map_io(void)
  * instances  of the kernel. So far so good. Peers on the PCI bus running 
  * Linux is a common design in telecom systems. The problem is that instead 
  * of all the devices being controlled by a single host, different
- * devices are controlles by different NPUs on the same bus, leading to
+ * devices are controlled by different NPUs on the same bus, leading to
  * multiple hosts on the bus. The exact bus layout looks like:
  *
  *                   Bus 0
@@ -211,7 +211,7 @@ void __init ixdp2x00_map_io(void)
  *                  |      |         |         |      |
  *             ... Dev    PMC       Media     Eth0   Eth1 ...
  *
- * The master controlls all but Eth1, which is controlled by the
+ * The master controls all but Eth1, which is controlled by the
  * slave. What this means is that the both the master and the slave
  * have to scan the bus, but only one of them can enumerate the bus.
  * In addition, after the bus is scanned, each kernel must remove
diff --git a/arch/arm/mach-ixp2000/ixdp2x01.c b/arch/arm/mach-ixp2000/ixdp2x01.c
index 3084a5f..d3d730d 100644
--- a/arch/arm/mach-ixp2000/ixdp2x01.c
+++ b/arch/arm/mach-ixp2000/ixdp2x01.c
@@ -276,7 +276,7 @@ static int __init ixdp2x01_pci_map_irq(struct pci_dev *dev, u8 slot, u8 pin)
 	/* Device is located after first MB bridge */
 	case 0x0008:
 		if (tmp_bus == dev->bus) {
-			/* Device is located directy after first MB bridge */
+			/* Device is located directly after first MB bridge */
 			switch (devpin) {
 			case DEVPIN(1, 1):	/* Onboard 82546 ch 0 */
 				if (machine_is_ixdp2401())
@@ -299,7 +299,7 @@ static int __init ixdp2x01_pci_map_irq(struct pci_dev *dev, u8 slot, u8 pin)
 		break;
 	case 0x0010:
 		if (tmp_bus == dev->bus) {
-			/* Device is located directy after second MB bridge */
+			/* Device is located directly after second MB bridge */
 			/* Secondary bus of second bridge */
 			switch (devpin) {
 			case DEVPIN(0, 1):	/* DB#0 */
@@ -348,7 +348,7 @@ int __init ixdp2x01_pci_init(void)
 subsys_initcall(ixdp2x01_pci_init);
 
 /*************************************************************************
- * IXDP2x01 Machine Intialization
+ * IXDP2x01 Machine Initialization
  *************************************************************************/
 static struct flash_platform_data ixdp2x01_flash_platform_data = {
 	.map_name	= "cfi_probe",
diff --git a/arch/arm/mach-ixp2000/pci.c b/arch/arm/mach-ixp2000/pci.c
index 5a09a90c..03f4cf7 100644
--- a/arch/arm/mach-ixp2000/pci.c
+++ b/arch/arm/mach-ixp2000/pci.c
@@ -102,7 +102,7 @@ int ixp2000_pci_read_config(struct pci_bus *bus, unsigned int devfn, int where,
 }
 
 /*
- * We don't do error checks by callling clear_master_aborts() b/c the
+ * We don't do error checks by calling clear_master_aborts() b/c the
  * assumption is that the caller did a read first to make sure a device
  * exists.
  */
diff --git a/arch/arm/mach-ixp23xx/core.c b/arch/arm/mach-ixp23xx/core.c
index b644bba..16356ff 100644
--- a/arch/arm/mach-ixp23xx/core.c
+++ b/arch/arm/mach-ixp23xx/core.c
@@ -389,7 +389,7 @@ struct sys_timer ixp23xx_timer = {
 
 
 /*************************************************************************
- * IXP23xx Platform Initializaion
+ * IXP23xx Platform Initialization
  *************************************************************************/
 static struct resource ixp23xx_uart_resources[] = {
 	{
diff --git a/arch/arm/mach-ixp4xx/gtwx5715-setup.c b/arch/arm/mach-ixp4xx/gtwx5715-setup.c
index 30f1300e..dc6725b 100644
--- a/arch/arm/mach-ixp4xx/gtwx5715-setup.c
+++ b/arch/arm/mach-ixp4xx/gtwx5715-setup.c
@@ -1,7 +1,7 @@
 /*
  * arch/arm/mach-ixp4xx/gtwx5715-setup.c
  *
- * Gemtek GTWX5715 (Linksys WRV54G) board settup
+ * Gemtek GTWX5715 (Linksys WRV54G) board setup
  *
  * Copyright (C) 2004 George T. Joseph
  * Derived from Coyote
diff --git a/arch/arm/mach-lh7a40x/lcd-panel.h b/arch/arm/mach-lh7a40x/lcd-panel.h
index 4fb2efc..df6e38e 100644
--- a/arch/arm/mach-lh7a40x/lcd-panel.h
+++ b/arch/arm/mach-lh7a40x/lcd-panel.h
@@ -126,7 +126,7 @@ static struct clcd_panel_extra lcd_panel_extra = {
 
  */
 
-/* The full horozontal cycle (Th) is clock/360/400/450. */
+/* The full horizontal cycle (Th) is clock/360/400/450. */
 /* The full vertical   cycle (Tv) is line/251/262/280. */
 
 #define PIX_CLOCK_TARGET	(6300000) /* -/6.3/7 MHz */
@@ -162,7 +162,7 @@ static struct clcd_panel lcd_panel = {
 	/* Logic Product Development LCD 6.4" VGA -10 */
 	/* Sharp PN LQ64D343 */
 
-/* The full horozontal cycle (Th) is clock/750/800/900. */
+/* The full horizontal cycle (Th) is clock/750/800/900. */
 /* The full vertical   cycle (Tv) is line/515/525/560. */
 
 #define PIX_CLOCK_TARGET	(28330000)
@@ -243,7 +243,7 @@ static struct clcd_panel lcd_panel = {
  * (fdisk, e2fsck).  And, at that speed the display may have a visible
  * flicker. */
 
-/* The full horozontal cycle (Th) is clock/832/1056/1395. */
+/* The full horizontal cycle (Th) is clock/832/1056/1395. */
 
 #define PIX_CLOCK_TARGET	(20000000)
 #define PIX_CLOCK_DIVIDER	CLOCK_TO_DIV (PIX_CLOCK_TARGET, HCLK)
diff --git a/arch/arm/mach-ns9xxx/time.c b/arch/arm/mach-ns9xxx/time.c
index dd25708..b97d0c5 100644
--- a/arch/arm/mach-ns9xxx/time.c
+++ b/arch/arm/mach-ns9xxx/time.c
@@ -35,7 +35,7 @@ static unsigned long ns9xxx_timer_gettimeoffset(void)
 {
 	/* return the microseconds which have passed since the last interrupt
 	 * was _serviced_.  That is, if an interrupt is pending or the counter
-	 * reloads, return one periode more. */
+	 * reloads, return one period more. */
 
 	u32 counter1 = SYS_TR(0);
 	int pending = SYS_ISR & (1 << IRQ_TIMER0);
diff --git a/arch/arm/mach-omap1/Kconfig b/arch/arm/mach-omap1/Kconfig
index 856c681..f6ecdd3 100644
--- a/arch/arm/mach-omap1/Kconfig
+++ b/arch/arm/mach-omap1/Kconfig
@@ -38,7 +38,7 @@ config MACH_OMAP_H2
 config MACH_OMAP_H3
 	bool "TI H3 Support"
 	depends on ARCH_OMAP1 && ARCH_OMAP16XX
-	select GPIOEXPANDER_OMAP
+#	select GPIOEXPANDER_OMAP
     	help
 	  TI OMAP 1710 H3 board support. Say Y here if you have such
 	  a board.
diff --git a/arch/arm/mach-omap1/board-osk.c b/arch/arm/mach-omap1/board-osk.c
index 7d0cf7a..e713029 100644
--- a/arch/arm/mach-omap1/board-osk.c
+++ b/arch/arm/mach-omap1/board-osk.c
@@ -385,7 +385,7 @@ static void __init osk_init(void)
 	/* Workaround for wrong CS3 (NOR flash) timing
 	 * There are some U-Boot versions out there which configure
 	 * wrong CS3 memory timings. This mainly leads to CRC
-	 * or similiar errors if you use NOR flash (e.g. with JFFS2)
+	 * or similar errors if you use NOR flash (e.g. with JFFS2)
 	 */
 	if (EMIFS_CCS(3) != EMIFS_CS3_VAL)
 		EMIFS_CCS(3) = EMIFS_CS3_VAL;
diff --git a/arch/arm/mach-omap1/board-palmte.c b/arch/arm/mach-omap1/board-palmte.c
index 4bc8a62..0158241 100644
--- a/arch/arm/mach-omap1/board-palmte.c
+++ b/arch/arm/mach-omap1/board-palmte.c
@@ -7,7 +7,7 @@
  *
  * Original version : Laurent Gonzalez
  *
- * Maintainters : http://palmtelinux.sf.net
+ * Maintainers : http://palmtelinux.sf.net
  *                palmtelinux-developpers@lists.sf.net
  *
  * This program is free software; you can redistribute it and/or modify
diff --git a/arch/arm/mach-omap1/pm.c b/arch/arm/mach-omap1/pm.c
index 8caee68..5bb348e 100644
--- a/arch/arm/mach-omap1/pm.c
+++ b/arch/arm/mach-omap1/pm.c
@@ -438,7 +438,7 @@ void omap_pm_suspend(void)
 		omap_writew(0, ULPD_SOFT_DISABLE_REQ_REG);
 
 	/*
-	 * Reenable interrupts
+	 * Re-enable interrupts
 	 */
 
 	local_irq_enable();
diff --git a/arch/arm/mach-omap2/clock.c b/arch/arm/mach-omap2/clock.c
index 5170481..588adb5 100644
--- a/arch/arm/mach-omap2/clock.c
+++ b/arch/arm/mach-omap2/clock.c
@@ -443,7 +443,7 @@ static long omap2_clk_round_rate(struct clk *clk, unsigned long rate)
 
 /*
  * Check the DLL lock state, and return tue if running in unlock mode.
- * This is needed to compenste for the shifted DLL value in unlock mode.
+ * This is needed to compensate for the shifted DLL value in unlock mode.
  */
 static u32 omap2_dll_force_needed(void)
 {
diff --git a/arch/arm/mach-omap2/clock.h b/arch/arm/mach-omap2/clock.h
index 162978f..4f79186 100644
--- a/arch/arm/mach-omap2/clock.h
+++ b/arch/arm/mach-omap2/clock.h
@@ -338,7 +338,7 @@ struct prcm_config {
 /*
  * These represent optimal values for common parts, it won't work for all.
  * As long as you scale down, most parameters are still work, they just
- * become sub-optimal. The RFR value goes in the oppisite direction. If you
+ * become sub-optimal. The RFR value goes in the opposite direction. If you
  * don't adjust it down as your clock period increases the refresh interval
  * will not be met. Setting all parameters for complete worst case may work,
  * but may cut memory performance by 2x. Due to errata the DLLs need to be
@@ -384,7 +384,7 @@ struct prcm_config {
  * Filling in table based on H4 boards and 2430-SDPs variants available.
  * There are quite a few more rates combinations which could be defined.
  *
- * When multiple values are defiend the start up will try and choose the
+ * When multiple values are defined the start up will try and choose the
  * fastest one. If a 'fast' value is defined, then automatically, the /2
  * one should be included as it can be used.	Generally having more that
  * one fast set does not make sense, as static timings need to be changed
diff --git a/arch/arm/mach-pxa/corgi_lcd.c b/arch/arm/mach-pxa/corgi_lcd.c
index a72476c..365b943 100644
--- a/arch/arm/mach-pxa/corgi_lcd.c
+++ b/arch/arm/mach-pxa/corgi_lcd.c
@@ -40,7 +40,7 @@
 #define PICTRL_ADRS     0x06
 #define POLCTRL_ADRS    0x07
 
-/* Resgister Bit Definitions */
+/* Register Bit Definitions */
 #define RESCTL_QVGA     0x01
 #define RESCTL_VGA      0x00
 
@@ -55,11 +55,11 @@
 #define POWER0_COM_DCLK 0x01  /* COM Voltage DC Bias DAC Serial Data Clock */
 #define POWER0_COM_DOUT 0x02  /* COM Voltage DC Bias DAC Serial Data Out */
 #define POWER0_DAC_ON   0x04  /* DAC Power Supply ON */
-#define POWER0_COM_ON   0x08  /* COM Powewr Supply ON */
+#define POWER0_COM_ON   0x08  /* COM Power Supply ON */
 #define POWER0_VCC5_ON  0x10  /* VCC5 Power Supply ON */
 
 #define POWER0_DAC_OFF  0x00  /* DAC Power Supply OFF */
-#define POWER0_COM_OFF  0x00  /* COM Powewr Supply OFF */
+#define POWER0_COM_OFF  0x00  /* COM Power Supply OFF */
 #define POWER0_VCC5_OFF 0x00  /* VCC5 Power Supply OFF */
 
 #define PICTRL_INIT_STATE      0x01
@@ -145,7 +145,7 @@ static void lcdtg_set_common_voltage(u8 base_data, u8 data)
 	lcdtg_i2c_send_stop(base_data);
 }
 
-/* Set Phase Adjuct */
+/* Set Phase Adjust */
 static void lcdtg_set_phadadj(int mode)
 {
 	int adj;
@@ -226,7 +226,7 @@ static void lcdtg_hw_init(int mode)
 		/* Signals output enable */
 		corgi_ssp_lcdtg_send(PICTRL_ADRS, 0);
 
-		/* Set Phase Adjuct */
+		/* Set Phase Adjust */
 		lcdtg_set_phadadj(mode);
 
 		/* Initialize for Input Signals from ATI */
diff --git a/arch/arm/mach-pxa/corgi_ssp.c b/arch/arm/mach-pxa/corgi_ssp.c
index ff6b4ee..40dea3d5 100644
--- a/arch/arm/mach-pxa/corgi_ssp.c
+++ b/arch/arm/mach-pxa/corgi_ssp.c
@@ -32,7 +32,7 @@ static struct corgissp_machinfo *ssp_machinfo;
  * There are three devices connected to the SSP interface:
  *   1. A touchscreen controller (TI ADS7846 compatible)
  *   2. An LCD contoller (with some Backlight functionality)
- *   3. A battery moinitoring IC (Maxim MAX1111)
+ *   3. A battery monitoring IC (Maxim MAX1111)
  *
  * Each device uses a different speed/mode of communication.
  *
diff --git a/arch/arm/mach-realview/localtimer.c b/arch/arm/mach-realview/localtimer.c
index caf6b8b..c7bdf04 100644
--- a/arch/arm/mach-realview/localtimer.c
+++ b/arch/arm/mach-realview/localtimer.c
@@ -30,7 +30,7 @@ static unsigned long mpcore_timer_rate;
 /*
  * local_timer_ack: checks for a local timer interrupt.
  *
- * If a local timer interrupt has occured, acknowledge and return 1.
+ * If a local timer interrupt has occurred, acknowledge and return 1.
  * Otherwise, return 0.
  */
 int local_timer_ack(void)
diff --git a/arch/arm/mach-s3c2410/mach-h1940.c b/arch/arm/mach-s3c2410/mach-h1940.c
index 5ccd0be..5c9bcea 100644
--- a/arch/arm/mach-s3c2410/mach-h1940.c
+++ b/arch/arm/mach-s3c2410/mach-h1940.c
@@ -17,6 +17,7 @@
 #include <linux/list.h>
 #include <linux/timer.h>
 #include <linux/init.h>
+#include <linux/sysdev.h>
 #include <linux/serial_core.h>
 #include <linux/platform_device.h>
 
diff --git a/arch/arm/mach-s3c2410/mach-qt2410.c b/arch/arm/mach-s3c2410/mach-qt2410.c
index 9cc4253..d86e6f1 100644
--- a/arch/arm/mach-s3c2410/mach-qt2410.c
+++ b/arch/arm/mach-s3c2410/mach-qt2410.c
@@ -27,6 +27,7 @@
 #include <linux/list.h>
 #include <linux/timer.h>
 #include <linux/init.h>
+#include <linux/sysdev.h>
 #include <linux/platform_device.h>
 #include <linux/serial_core.h>
 #include <linux/spi/spi.h>
diff --git a/arch/arm/mach-s3c2412/dma.c b/arch/arm/mach-s3c2412/dma.c
index d0f4695..668ccce 100644
--- a/arch/arm/mach-s3c2412/dma.c
+++ b/arch/arm/mach-s3c2412/dma.c
@@ -59,8 +59,8 @@ static struct s3c24xx_dma_map __initdata s3c2412_dma_mappings[] = {
 	[DMACH_SPI1] = {
 		.name		= "spi1",
 		.channels	= MAP(S3C2412_DMAREQSEL_SPI1TX),
-		.hw_addr.to	= S3C2410_PA_SPI + 0x20 + S3C2410_SPTDAT,
-		.hw_addr.from	= S3C2410_PA_SPI + 0x20 + S3C2410_SPRDAT,
+		.hw_addr.to	= S3C2410_PA_SPI + S3C2412_SPI1 + S3C2410_SPTDAT,
+		.hw_addr.from	= S3C2410_PA_SPI + S3C2412_SPI1  + S3C2410_SPRDAT,
 	},
 	[DMACH_UART0] = {
 		.name		= "uart0",
diff --git a/arch/arm/mach-s3c2412/s3c2412.c b/arch/arm/mach-s3c2412/s3c2412.c
index aafe0bc..c602aa3 100644
--- a/arch/arm/mach-s3c2412/s3c2412.c
+++ b/arch/arm/mach-s3c2412/s3c2412.c
@@ -37,6 +37,7 @@
 #include <asm/arch/regs-gpio.h>
 #include <asm/arch/regs-gpioj.h>
 #include <asm/arch/regs-dsc.h>
+#include <asm/arch/regs-spi.h>
 
 #include <asm/plat-s3c24xx/s3c2412.h>
 #include <asm/plat-s3c24xx/cpu.h>
@@ -74,6 +75,14 @@ void __init s3c2412_init_uarts(struct s3c2410_uartcfg *cfg, int no)
 	s3c_device_sdi.name  = "s3c2412-sdi";
 	s3c_device_lcd.name  = "s3c2412-lcd";
 	s3c_device_nand.name = "s3c2412-nand";
+
+	/* spi channel related changes, s3c2412/13 specific */
+	s3c_device_spi0.name = "s3c2412-spi";
+	s3c_device_spi0.resource[0].end = S3C24XX_PA_SPI + 0x24;
+	s3c_device_spi1.name = "s3c2412-spi";
+	s3c_device_spi1.resource[0].start = S3C24XX_PA_SPI + S3C2412_SPI1;
+	s3c_device_spi1.resource[0].end = S3C24XX_PA_SPI + S3C2412_SPI1 + 0x24;
+
 }
 
 /* s3c2412_idle
diff --git a/arch/arm/mach-s3c2440/mach-osiris.c b/arch/arm/mach-s3c2440/mach-osiris.c
index 324f5a2..4d6c7a5 100644
--- a/arch/arm/mach-s3c2440/mach-osiris.c
+++ b/arch/arm/mach-s3c2440/mach-osiris.c
@@ -45,7 +45,7 @@
 #include <asm/plat-s3c24xx/devs.h>
 #include <asm/plat-s3c24xx/cpu.h>
 
-/* onboard perihpheral map */
+/* onboard perihperal map */
 
 static struct map_desc osiris_iodesc[] __initdata = {
   /* ISA IO areas (may be over-written later) */
diff --git a/arch/arm/mach-s3c2440/mach-rx3715.c b/arch/arm/mach-s3c2440/mach-rx3715.c
index c3cc4bf..866ff71 100644
--- a/arch/arm/mach-s3c2440/mach-rx3715.c
+++ b/arch/arm/mach-s3c2440/mach-rx3715.c
@@ -19,6 +19,7 @@
 #include <linux/init.h>
 #include <linux/tty.h>
 #include <linux/console.h>
+#include <linux/sysdev.h>
 #include <linux/platform_device.h>
 #include <linux/serial_core.h>
 #include <linux/serial.h>
diff --git a/arch/arm/mach-s3c2443/clock.c b/arch/arm/mach-s3c2443/clock.c
index 0b6e360..5955efb 100644
--- a/arch/arm/mach-s3c2443/clock.c
+++ b/arch/arm/mach-s3c2443/clock.c
@@ -747,6 +747,25 @@ static struct clk init_clocks[] = {
 		.enable		= s3c2443_clkcon_enable_h,
 		.ctrlbit	= S3C2443_HCLKCON_USBD,
 	}, {
+		.name		= "hsmmc",
+		.id		= -1,
+		.parent		= &clk_h,
+		.enable		= s3c2443_clkcon_enable_h,
+		.ctrlbit	= S3C2443_HCLKCON_HSMMC,
+	}, {
+		.name		= "cfc",
+		.id		= -1,
+		.parent		= &clk_h,
+		.enable		= s3c2443_clkcon_enable_h,
+		.ctrlbit	= S3C2443_HCLKCON_CFC,
+		.ctrlbit	= S3C2443_HCLKCON_HSMMC,
+	}, {
+		.name		= "ssmc",
+		.id		= -1,
+		.parent		= &clk_h,
+		.enable		= s3c2443_clkcon_enable_h,
+		.ctrlbit	= S3C2443_HCLKCON_SSMC,
+	}, {
 		.name		= "timers",
 		.id		= -1,
 		.parent		= &clk_p,
@@ -791,7 +810,8 @@ static struct clk init_clocks[] = {
 		.name		= "usb-bus-host",
 		.id		= -1,
 		.parent		= &clk_usb_bus_host,
-	}, {	.name		= "ac97",
+	}, {
+		.name		= "ac97",
 		.id		= -1,
 		.parent		= &clk_p,
 		.ctrlbit	= S3C2443_PCLKCON_AC97,
diff --git a/arch/arm/mach-s3c2443/mach-smdk2443.c b/arch/arm/mach-s3c2443/mach-smdk2443.c
index b71ee53..b1eb709 100644
--- a/arch/arm/mach-s3c2443/mach-smdk2443.c
+++ b/arch/arm/mach-s3c2443/mach-smdk2443.c
@@ -104,6 +104,7 @@ static struct s3c2410_uartcfg smdk2443_uartcfgs[] __initdata = {
 static struct platform_device *smdk2443_devices[] __initdata = {
 	&s3c_device_wdt,
 	&s3c_device_i2c,
+	&s3c_device_hsmmc,
 };
 
 static void __init smdk2443_map_io(void)
diff --git a/arch/arm/mach-s3c2443/s3c2443.c b/arch/arm/mach-s3c2443/s3c2443.c
index 11b1d0b..8d81171 100644
--- a/arch/arm/mach-s3c2443/s3c2443.c
+++ b/arch/arm/mach-s3c2443/s3c2443.c
@@ -63,6 +63,10 @@ int __init s3c2443_init(void)
 
 	s3c_device_nand.name = "s3c2412-nand";
 
+	/* change WDT IRQ number */
+	s3c_device_wdt.resource[1].start = IRQ_S3C2443_WDT;
+	s3c_device_wdt.resource[1].end   = IRQ_S3C2443_WDT;
+
 	return sysdev_register(&s3c2443_sysdev);
 }
 
diff --git a/arch/arm/mach-sa1100/time.c b/arch/arm/mach-sa1100/time.c
index 416e277..29cb0c1 100644
--- a/arch/arm/mach-sa1100/time.c
+++ b/arch/arm/mach-sa1100/time.c
@@ -25,7 +25,7 @@ static unsigned long __init sa1100_get_rtc_time(void)
 {
 	/*
 	 * According to the manual we should be able to let RTTR be zero
-	 * and then a default diviser for a 32.768KHz clock is used.
+	 * and then a default divisor for a 32.768KHz clock is used.
 	 * Apparently this doesn't work, at least for my SA1110 rev 5.
 	 * If the clock divider is uninitialized then reset it to the
 	 * default value to get the 1Hz clock.
diff --git a/arch/arm/mm/Kconfig b/arch/arm/mm/Kconfig
index 15f0284..5f472a8 100644
--- a/arch/arm/mm/Kconfig
+++ b/arch/arm/mm/Kconfig
@@ -351,6 +351,7 @@ config CPU_V6
 	select CPU_CACHE_V6
 	select CPU_CACHE_VIPT
 	select CPU_CP15_MMU
+	select CPU_HAS_ASID
 	select CPU_COPY_V6 if MMU
 	select CPU_TLB_V6 if MMU
 
@@ -376,6 +377,7 @@ config CPU_V7
 	select CPU_CACHE_V7
 	select CPU_CACHE_VIPT
 	select CPU_CP15_MMU
+	select CPU_HAS_ASID
 	select CPU_COPY_V6 if MMU
 	select CPU_TLB_V6 if MMU
 
@@ -498,6 +500,12 @@ config CPU_TLB_V6
 
 endif
 
+config CPU_HAS_ASID
+	bool
+	help
+	  This indicates whether the CPU has the ASID register; used to
+	  tag TLB and possibly cache entries.
+
 config CPU_CP15
 	bool
 	help
diff --git a/arch/arm/mm/alignment.c b/arch/arm/mm/alignment.c
index 19ca333..36440c8 100644
--- a/arch/arm/mm/alignment.c
+++ b/arch/arm/mm/alignment.c
@@ -3,7 +3,7 @@
  *
  *  Copyright (C) 1995  Linus Torvalds
  *  Modifications for ARM processor (c) 1995-2001 Russell King
- *  Thumb aligment fault fixups (c) 2004 MontaVista Software, Inc.
+ *  Thumb alignment fault fixups (c) 2004 MontaVista Software, Inc.
  *  - Adapted from gdb/sim/arm/thumbemu.c -- Thumb instruction emulation.
  *    Copyright (C) 1996, Cygnus Software Technologies Ltd.
  *
diff --git a/arch/arm/mm/ioremap.c b/arch/arm/mm/ioremap.c
index d6167ad..f3ade18 100644
--- a/arch/arm/mm/ioremap.c
+++ b/arch/arm/mm/ioremap.c
@@ -346,7 +346,7 @@ void __iounmap(volatile void __iomem *addr)
 #ifndef CONFIG_SMP
 	/*
 	 * If this is a section based mapping we need to handle it
-	 * specially as the VM subysystem does not know how to handle
+	 * specially as the VM subsystem does not know how to handle
 	 * such a beast. We need the lock here b/c we need to clear
 	 * all the mappings before the area can be reclaimed
 	 * by someone else.
diff --git a/arch/arm/mm/mmu.c b/arch/arm/mm/mmu.c
index 2ba1530..02e050a 100644
--- a/arch/arm/mm/mmu.c
+++ b/arch/arm/mm/mmu.c
@@ -92,7 +92,7 @@ static struct cachepolicy cache_policies[] __initdata = {
 };
 
 /*
- * These are useful for identifing cache coherency
+ * These are useful for identifying cache coherency
  * problems by allowing the cache or the cache and
  * writebuffer to be turned off.  (Note: the write
  * buffer should not be on and the cache off).
diff --git a/arch/arm/plat-iop/pci.c b/arch/arm/plat-iop/pci.c
index 7bf4229..2b5aa11 100644
--- a/arch/arm/plat-iop/pci.c
+++ b/arch/arm/plat-iop/pci.c
@@ -86,10 +86,10 @@ static int iop3xx_pci_status(void)
 
 /*
  * Simply write the address register and read the configuration
- * data.  Note that the 4 nop's ensure that we are able to handle
+ * data.  Note that the 4 nops ensure that we are able to handle
  * a delayed abort (in theory.)
  */
-static inline u32 iop3xx_read(unsigned long addr)
+static u32 iop3xx_read(unsigned long addr)
 {
 	u32 val;
 
@@ -322,7 +322,7 @@ void __init iop3xx_atu_disable(void)
 /* Flag to determine whether the ATU is initialized and the PCI bus scanned */
 int init_atu;
 
-void iop3xx_pci_preinit(void)
+void __init iop3xx_pci_preinit(void)
 {
 	if (iop3xx_get_init_atu() == IOP3XX_INIT_ATU_ENABLE) {
 		iop3xx_atu_disable();
diff --git a/arch/arm/plat-omap/common.c b/arch/arm/plat-omap/common.c
index dd8708a..7987aa6 100644
--- a/arch/arm/plat-omap/common.c
+++ b/arch/arm/plat-omap/common.c
@@ -73,7 +73,7 @@ static const void *get_config(u16 tag, size_t len, int skip, size_t *len_out)
 	}
 	if (info != NULL) {
 		/* Check the length as a lame attempt to check for
-		 * binary inconsistancy. */
+		 * binary inconsistency. */
 		if (len != NO_LENGTH_CHECK) {
 			/* Word-align len */
 			if (len & 0x03)
diff --git a/arch/arm/plat-omap/dma.c b/arch/arm/plat-omap/dma.c
index 55a4d3b..88d5b6d 100644
--- a/arch/arm/plat-omap/dma.c
+++ b/arch/arm/plat-omap/dma.c
@@ -1172,7 +1172,7 @@ static void set_b1_regs(void)
 		break;
 	default:
 		BUG();
-		return;	/* Supress warning about uninitialized vars */
+		return;	/* Suppress warning about uninitialized vars */
 	}
 
 	if (omap_dma_in_1510_mode()) {
diff --git a/arch/arm/plat-omap/sram.c b/arch/arm/plat-omap/sram.c
index bc46f33..1f23f04 100644
--- a/arch/arm/plat-omap/sram.c
+++ b/arch/arm/plat-omap/sram.c
@@ -59,8 +59,8 @@ extern unsigned long omapfb_reserve_sram(unsigned long sram_pstart,
 
 /*
  * Depending on the target RAMFS firewall setup, the public usable amount of
- * SRAM varies.  The default accessable size for all device types is 2k. A GP
- * device allows ARM11 but not other initators for full size. This
+ * SRAM varies.  The default accessible size for all device types is 2k. A GP
+ * device allows ARM11 but not other initiators for full size. This
  * functionality seems ok until some nice security API happens.
  */
 static int is_sram_locked(void)
@@ -71,7 +71,7 @@ static int is_sram_locked(void)
 		type = __raw_readl(VA_CONTROL_STAT) & TYPE_MASK;
 
 	if (type == GP_DEVICE) {
-		/* RAMFW: R/W access to all initators for all qualifier sets */
+		/* RAMFW: R/W access to all initiators for all qualifier sets */
 		if (cpu_is_omap242x()) {
 			__raw_writel(0xFF, VA_REQINFOPERM0); /* all q-vects */
 			__raw_writel(0xCFDE, VA_READPERM0);  /* all i-read */
diff --git a/arch/arm/plat-omap/usb.c b/arch/arm/plat-omap/usb.c
index 25489aa..a5aedf9 100644
--- a/arch/arm/plat-omap/usb.c
+++ b/arch/arm/plat-omap/usb.c
@@ -177,7 +177,7 @@ static u32 __init omap_usb0_init(unsigned nwires, unsigned is_device)
 
 	/* NOTE:  SPEED and SUSP aren't configured here.  OTG hosts
 	 * may be able to use I2C requests to set those bits along
-	 * with VBUS switching and overcurrent detction.
+	 * with VBUS switching and overcurrent detection.
 	 */
 
 	if (cpu_class_is_omap1() && nwires != 6)
diff --git a/arch/arm/plat-s3c24xx/common-smdk.c b/arch/arm/plat-s3c24xx/common-smdk.c
index 908efa7..7ed19b2 100644
--- a/arch/arm/plat-s3c24xx/common-smdk.c
+++ b/arch/arm/plat-s3c24xx/common-smdk.c
@@ -18,6 +18,7 @@
 #include <linux/list.h>
 #include <linux/timer.h>
 #include <linux/init.h>
+#include <linux/sysdev.h>
 #include <linux/platform_device.h>
 
 #include <linux/mtd/mtd.h>
@@ -29,6 +30,7 @@
 #include <asm/mach/map.h>
 #include <asm/mach/irq.h>
 
+#include <asm/mach-types.h>
 #include <asm/hardware.h>
 #include <asm/io.h>
 #include <asm/irq.h>
@@ -192,6 +194,9 @@ void __init smdk_machine_init(void)
 	s3c2410_gpio_setpin(S3C2410_GPF6, 1);
 	s3c2410_gpio_setpin(S3C2410_GPF7, 1);
 
+	if (machine_is_smdk2443())
+		smdk_nand_info.twrph0 = 50;
+
 	s3c_device_nand.dev.platform_data = &smdk_nand_info;
 
 	platform_add_devices(smdk_devs, ARRAY_SIZE(smdk_devs));
diff --git a/arch/arm/plat-s3c24xx/devs.c b/arch/arm/plat-s3c24xx/devs.c
index 0fe53b3..5875da0 100644
--- a/arch/arm/plat-s3c24xx/devs.c
+++ b/arch/arm/plat-s3c24xx/devs.c
@@ -33,6 +33,7 @@
 
 #include <asm/plat-s3c24xx/devs.h>
 #include <asm/plat-s3c24xx/cpu.h>
+#include <asm/arch/regs-spi.h>
 
 /* Serial port registrations */
 
@@ -402,6 +403,36 @@ struct platform_device s3c_device_sdi = {
 
 EXPORT_SYMBOL(s3c_device_sdi);
 
+/* High-speed MMC/SD */
+
+static struct resource s3c_hsmmc_resource[] = {
+	[0] = {
+		.start = S3C2443_PA_HSMMC,
+		.end   = S3C2443_PA_HSMMC + S3C2443_SZ_HSMMC - 1,
+		.flags = IORESOURCE_MEM,
+	},
+	[1] = {
+		.start = IRQ_S3C2443_HSMMC,
+		.end   = IRQ_S3C2443_HSMMC,
+		.flags = IORESOURCE_IRQ,
+	}
+};
+
+static u64 s3c_device_hsmmc_dmamask = 0xffffffffUL;
+
+struct platform_device s3c_device_hsmmc = {
+	.name		  = "s3c-sdhci",
+	.id		  = -1,
+	.num_resources	  = ARRAY_SIZE(s3c_hsmmc_resource),
+	.resource	  = s3c_hsmmc_resource,
+	.dev              = {
+		.dma_mask = &s3c_device_hsmmc_dmamask,
+		.coherent_dma_mask = 0xffffffffUL
+	}
+};
+
+
+
 /* SPI (0) */
 
 static struct resource s3c_spi0_resource[] = {
@@ -437,8 +468,8 @@ EXPORT_SYMBOL(s3c_device_spi0);
 
 static struct resource s3c_spi1_resource[] = {
 	[0] = {
-		.start = S3C24XX_PA_SPI + 0x20,
-		.end   = S3C24XX_PA_SPI + 0x20 + 0x1f,
+		.start = S3C24XX_PA_SPI + S3C2410_SPI1,
+		.end   = S3C24XX_PA_SPI + S3C2410_SPI1 + 0x1f,
 		.flags = IORESOURCE_MEM,
 	},
 	[1] = {
diff --git a/arch/arm/plat-s3c24xx/dma.c b/arch/arm/plat-s3c24xx/dma.c
index 6f03c93..08d80f2 100644
--- a/arch/arm/plat-s3c24xx/dma.c
+++ b/arch/arm/plat-s3c24xx/dma.c
@@ -1153,7 +1153,7 @@ EXPORT_SYMBOL(s3c2410_dma_set_buffdone_fn);
  *
  * hwcfg:     the value for xxxSTCn register,
  *            bit 0: 0=increment pointer, 1=leave pointer
- *            bit 1: 0=soucre is AHB, 1=soucre is APB
+ *            bit 1: 0=source is AHB, 1=source is APB
  *
  * devaddr:   physical address of the source
 */
diff --git a/arch/arm/plat-s3c24xx/pm-simtec.c b/arch/arm/plat-s3c24xx/pm-simtec.c
index bd965f2..cb0b3a4 100644
--- a/arch/arm/plat-s3c24xx/pm-simtec.c
+++ b/arch/arm/plat-s3c24xx/pm-simtec.c
@@ -18,6 +18,7 @@
 #include <linux/list.h>
 #include <linux/timer.h>
 #include <linux/init.h>
+#include <linux/sysdev.h>
 #include <linux/device.h>
 
 #include <asm/mach/arch.h>
diff --git a/arch/arm/plat-s3c24xx/pm.c b/arch/arm/plat-s3c24xx/pm.c
index c6b03f8..5692ecc 100644
--- a/arch/arm/plat-s3c24xx/pm.c
+++ b/arch/arm/plat-s3c24xx/pm.c
@@ -555,7 +555,7 @@ static int s3c2410_pm_enter(suspend_state_t state)
 	__raw_writel(__raw_readl(S3C2410_INTPND), S3C2410_INTPND);
 	__raw_writel(__raw_readl(S3C2410_SRCPND), S3C2410_SRCPND);
 
-	/* call cpu specific preperation */
+	/* call cpu specific preparation */
 
 	pm_cpu_prep();