[ARM] pxa: make pxa2xx_spi driver use ssp_request()/ssp_free()

1. make pxa2xx_spi.c use ssp_request() and ssp_free() to get the common
   information of the designated SSP port.

2. remove those IRQ/memory request code, ssp_request() has done that for
   the driver

3. the SPI platform device is thus made psuedo, no resource (memory/IRQ)
   has to be defined, all will be retreived by ssp_request()

4. introduce ssp_get_clk_div() to handle controller difference in clock
   divisor setting

5. use clk_xxx() API for clock enable/disable, and clk_get_rate() to
   handle the different SSP clock frequency between different processors

Signed-off-by: eric miao <eric.miao@marvell.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

1 files changed, 0 insertions, 17 deletions

diff --git a/arch/arm/mach-pxa/lubbock.c b/arch/arm/mach-pxa/lubbock.c
index 1d3112d..ebb73f1 100644
--- a/arch/arm/mach-pxa/lubbock.c
+++ b/arch/arm/mach-pxa/lubbock.c
@@ -206,30 +206,13 @@ static struct resource smc91x_resources[] = {
  * (to J5) and poking board registers (as done below).  Else it's only useful
  * for the temperature sensors.
  */
-static struct resource pxa_ssp_resources[] = {
-	[0] = {
-		.start	= __PREG(SSCR0_P(1)),
-		.end	= __PREG(SSCR0_P(1)) + 0x14,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start	= IRQ_SSP,
-		.end	= IRQ_SSP,
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
 static struct pxa2xx_spi_master pxa_ssp_master_info = {
-	.ssp_type	= PXA25x_SSP,
-	.clock_enable	= CKEN_SSP,
 	.num_chipselect	= 0,
 };
 
 static struct platform_device pxa_ssp = {
 	.name		= "pxa2xx-spi",
 	.id		= 1,
-	.resource	= pxa_ssp_resources,
-	.num_resources	= ARRAY_SIZE(pxa_ssp_resources),
 	.dev = {
 		.platform_data	= &pxa_ssp_master_info,
 	},